locking/refcounts: Include fewer headers in <linux/refcount.h>
[linux/fpc-iii.git] / arch / x86 / include / asm / intel-mid.h
blobfe04491130aef0095aa6481fb93fe013415ac6f3
1 /*
2 * intel-mid.h: Intel MID specific setup code
4 * (C) Copyright 2009 Intel Corporation
6 * This program is free software; you can redistribute it and/or
7 * modify it under the terms of the GNU General Public License
8 * as published by the Free Software Foundation; version 2
9 * of the License.
11 #ifndef _ASM_X86_INTEL_MID_H
12 #define _ASM_X86_INTEL_MID_H
14 #include <linux/sfi.h>
15 #include <linux/pci.h>
16 #include <linux/platform_device.h>
18 extern int intel_mid_pci_init(void);
19 extern int intel_mid_pci_set_power_state(struct pci_dev *pdev, pci_power_t state);
20 extern pci_power_t intel_mid_pci_get_power_state(struct pci_dev *pdev);
22 extern void intel_mid_pwr_power_off(void);
24 #define INTEL_MID_PWR_LSS_OFFSET 4
25 #define INTEL_MID_PWR_LSS_TYPE (1 << 7)
27 extern int intel_mid_pwr_get_lss_id(struct pci_dev *pdev);
29 extern int get_gpio_by_name(const char *name);
30 extern int __init sfi_parse_mrtc(struct sfi_table_header *table);
31 extern int __init sfi_parse_mtmr(struct sfi_table_header *table);
32 extern int sfi_mrtc_num;
33 extern struct sfi_rtc_table_entry sfi_mrtc_array[];
36 * Here defines the array of devices platform data that IAFW would export
37 * through SFI "DEVS" table, we use name and type to match the device and
38 * its platform data.
40 struct devs_id {
41 char name[SFI_NAME_LEN + 1];
42 u8 type;
43 u8 delay;
44 u8 msic;
45 void *(*get_platform_data)(void *info);
48 #define sfi_device(i) \
49 static const struct devs_id *const __intel_mid_sfi_##i##_dev __used \
50 __attribute__((__section__(".x86_intel_mid_dev.init"))) = &i
52 /**
53 * struct mid_sd_board_info - template for SD device creation
54 * @name: identifies the driver
55 * @bus_num: board-specific identifier for a given SD controller
56 * @max_clk: the maximum frequency device supports
57 * @platform_data: the particular data stored there is driver-specific
59 struct mid_sd_board_info {
60 char name[SFI_NAME_LEN];
61 int bus_num;
62 unsigned short addr;
63 u32 max_clk;
64 void *platform_data;
68 * Medfield is the follow-up of Moorestown, it combines two chip solution into
69 * one. Other than that it also added always-on and constant tsc and lapic
70 * timers. Medfield is the platform name, and the chip name is called Penwell
71 * we treat Medfield/Penwell as a variant of Moorestown. Penwell can be
72 * identified via MSRs.
74 enum intel_mid_cpu_type {
75 /* 1 was Moorestown */
76 INTEL_MID_CPU_CHIP_PENWELL = 2,
77 INTEL_MID_CPU_CHIP_CLOVERVIEW,
78 INTEL_MID_CPU_CHIP_TANGIER,
81 extern enum intel_mid_cpu_type __intel_mid_cpu_chip;
83 /**
84 * struct intel_mid_ops - Interface between intel-mid & sub archs
85 * @arch_setup: arch_setup function to re-initialize platform
86 * structures (x86_init, x86_platform_init)
88 * This structure can be extended if any new interface is required
89 * between intel-mid & its sub arch files.
91 struct intel_mid_ops {
92 void (*arch_setup)(void);
95 /* Helper API's for INTEL_MID_OPS_INIT */
96 #define DECLARE_INTEL_MID_OPS_INIT(cpuname, cpuid) \
97 [cpuid] = get_##cpuname##_ops
99 /* Maximum number of CPU ops */
100 #define MAX_CPU_OPS(a) (sizeof(a)/sizeof(void *))
103 * For every new cpu addition, a weak get_<cpuname>_ops() function needs be
104 * declared in arch/x86/platform/intel_mid/intel_mid_weak_decls.h.
106 #define INTEL_MID_OPS_INIT { \
107 DECLARE_INTEL_MID_OPS_INIT(penwell, INTEL_MID_CPU_CHIP_PENWELL), \
108 DECLARE_INTEL_MID_OPS_INIT(cloverview, INTEL_MID_CPU_CHIP_CLOVERVIEW), \
109 DECLARE_INTEL_MID_OPS_INIT(tangier, INTEL_MID_CPU_CHIP_TANGIER) \
112 #ifdef CONFIG_X86_INTEL_MID
114 static inline enum intel_mid_cpu_type intel_mid_identify_cpu(void)
116 return __intel_mid_cpu_chip;
119 static inline bool intel_mid_has_msic(void)
121 return (intel_mid_identify_cpu() == INTEL_MID_CPU_CHIP_PENWELL);
124 #else /* !CONFIG_X86_INTEL_MID */
126 #define intel_mid_identify_cpu() 0
127 #define intel_mid_has_msic() 0
129 #endif /* !CONFIG_X86_INTEL_MID */
131 enum intel_mid_timer_options {
132 INTEL_MID_TIMER_DEFAULT,
133 INTEL_MID_TIMER_APBT_ONLY,
134 INTEL_MID_TIMER_LAPIC_APBT,
137 extern enum intel_mid_timer_options intel_mid_timer_options;
140 * Penwell uses spread spectrum clock, so the freq number is not exactly
141 * the same as reported by MSR based on SDM.
143 #define FSB_FREQ_83SKU 83200
144 #define FSB_FREQ_100SKU 99840
145 #define FSB_FREQ_133SKU 133000
147 #define FSB_FREQ_167SKU 167000
148 #define FSB_FREQ_200SKU 200000
149 #define FSB_FREQ_267SKU 267000
150 #define FSB_FREQ_333SKU 333000
151 #define FSB_FREQ_400SKU 400000
153 /* Bus Select SoC Fuse value */
154 #define BSEL_SOC_FUSE_MASK 0x7
155 /* FSB 133MHz */
156 #define BSEL_SOC_FUSE_001 0x1
157 /* FSB 100MHz */
158 #define BSEL_SOC_FUSE_101 0x5
159 /* FSB 83MHz */
160 #define BSEL_SOC_FUSE_111 0x7
162 #define SFI_MTMR_MAX_NUM 8
163 #define SFI_MRTC_MAX 8
165 extern void intel_scu_devices_create(void);
166 extern void intel_scu_devices_destroy(void);
168 /* VRTC timer */
169 #define MRST_VRTC_MAP_SZ 1024
170 /* #define MRST_VRTC_PGOFFSET 0xc00 */
172 extern void intel_mid_rtc_init(void);
174 /* The offset for the mapping of global gpio pin to irq */
175 #define INTEL_MID_IRQ_OFFSET 0x100
177 #endif /* _ASM_X86_INTEL_MID_H */