?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
bpf: Prevent memory disambiguation attack
[linux/fpc-iii.git] / drivers / gpu / drm / i915 / intel_cdclk.c
blob6c76c7534c490501787593f8479f579f3a68ad92
1 /*
2 * Copyright © 2006-2017 Intel Corporation
3 *
4 * Permission is hereby granted, free of charge, to any person obtaining a
5 * copy of this software and associated documentation files (the "Software"),
6 * to deal in the Software without restriction, including without limitation
7 * the rights to use, copy, modify, merge, publish, distribute, sublicense,
8 * and/or sell copies of the Software, and to permit persons to whom the
9 * Software is furnished to do so, subject to the following conditions:
10 *
11 * The above copyright notice and this permission notice (including the next
12 * paragraph) shall be included in all copies or substantial portions of the
13 * Software.
14 *
15 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
16 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
17 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
18 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
19 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
20 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
21 * DEALINGS IN THE SOFTWARE.
22 */
23
24 #include "intel_drv.h"
25
26 /**
27 * DOC: CDCLK / RAWCLK
28 *
29 * The display engine uses several different clocks to do its work. There
30 * are two main clocks involved that aren't directly related to the actual
31 * pixel clock or any symbol/bit clock of the actual output port. These
32 * are the core display clock (CDCLK) and RAWCLK.
33 *
34 * CDCLK clocks most of the display pipe logic, and thus its frequency
35 * must be high enough to support the rate at which pixels are flowing
36 * through the pipes. Downscaling must also be accounted as that increases
37 * the effective pixel rate.
38 *
39 * On several platforms the CDCLK frequency can be changed dynamically
40 * to minimize power consumption for a given display configuration.
41 * Typically changes to the CDCLK frequency require all the display pipes
42 * to be shut down while the frequency is being changed.
43 *
44 * On SKL+ the DMC will toggle the CDCLK off/on during DC5/6 entry/exit.
45 * DMC will not change the active CDCLK frequency however, so that part
46 * will still be performed by the driver directly.
47 *
48 * RAWCLK is a fixed frequency clock, often used by various auxiliary
49 * blocks such as AUX CH or backlight PWM. Hence the only thing we
50 * really need to know about RAWCLK is its frequency so that various
51 * dividers can be programmed correctly.
52 */
53
54 static void fixed_133mhz_get_cdclk(struct drm_i915_private *dev_priv,
55 struct intel_cdclk_state *cdclk_state)
56 {
57 cdclk_state->cdclk = 133333;
58 }
59
60 static void fixed_200mhz_get_cdclk(struct drm_i915_private *dev_priv,
61 struct intel_cdclk_state *cdclk_state)
62 {
63 cdclk_state->cdclk = 200000;
64 }
65
66 static void fixed_266mhz_get_cdclk(struct drm_i915_private *dev_priv,
67 struct intel_cdclk_state *cdclk_state)
68 {
69 cdclk_state->cdclk = 266667;
70 }
71
72 static void fixed_333mhz_get_cdclk(struct drm_i915_private *dev_priv,
73 struct intel_cdclk_state *cdclk_state)
74 {
75 cdclk_state->cdclk = 333333;
76 }
77
78 static void fixed_400mhz_get_cdclk(struct drm_i915_private *dev_priv,
79 struct intel_cdclk_state *cdclk_state)
80 {
81 cdclk_state->cdclk = 400000;
82 }
83
84 static void fixed_450mhz_get_cdclk(struct drm_i915_private *dev_priv,
85 struct intel_cdclk_state *cdclk_state)
86 {
87 cdclk_state->cdclk = 450000;
88 }
89
90 static void i85x_get_cdclk(struct drm_i915_private *dev_priv,
91 struct intel_cdclk_state *cdclk_state)
92 {
93 struct pci_dev *pdev = dev_priv->drm.pdev;
94 u16 hpllcc = 0;
95
96 /*
97 * 852GM/852GMV only supports 133 MHz and the HPLLCC
98 * encoding is different :(
99 * FIXME is this the right way to detect 852GM/852GMV?
100 */
101 if (pdev->revision == 0x1) {
102 cdclk_state->cdclk = 133333;
103 return;
104 }
105
106 pci_bus_read_config_word(pdev->bus,
107 PCI_DEVFN(0, 3), HPLLCC, &hpllcc);
108
109 /* Assume that the hardware is in the high speed state. This
110 * should be the default.
111 */
112 switch (hpllcc & GC_CLOCK_CONTROL_MASK) {
113 case GC_CLOCK_133_200:
114 case GC_CLOCK_133_200_2:
115 case GC_CLOCK_100_200:
116 cdclk_state->cdclk = 200000;
117 break;
118 case GC_CLOCK_166_250:
119 cdclk_state->cdclk = 250000;
120 break;
121 case GC_CLOCK_100_133:
122 cdclk_state->cdclk = 133333;
123 break;
124 case GC_CLOCK_133_266:
125 case GC_CLOCK_133_266_2:
126 case GC_CLOCK_166_266:
127 cdclk_state->cdclk = 266667;
128 break;
129 }
130 }
131
132 static void i915gm_get_cdclk(struct drm_i915_private *dev_priv,
133 struct intel_cdclk_state *cdclk_state)
134 {
135 struct pci_dev *pdev = dev_priv->drm.pdev;
136 u16 gcfgc = 0;
137
138 pci_read_config_word(pdev, GCFGC, &gcfgc);
139
140 if (gcfgc & GC_LOW_FREQUENCY_ENABLE) {
141 cdclk_state->cdclk = 133333;
142 return;
143 }
144
145 switch (gcfgc & GC_DISPLAY_CLOCK_MASK) {
146 case GC_DISPLAY_CLOCK_333_320_MHZ:
147 cdclk_state->cdclk = 333333;
148 break;
149 default:
150 case GC_DISPLAY_CLOCK_190_200_MHZ:
151 cdclk_state->cdclk = 190000;
152 break;
153 }
154 }
155
156 static void i945gm_get_cdclk(struct drm_i915_private *dev_priv,
157 struct intel_cdclk_state *cdclk_state)
158 {
159 struct pci_dev *pdev = dev_priv->drm.pdev;
160 u16 gcfgc = 0;
161
162 pci_read_config_word(pdev, GCFGC, &gcfgc);
163
164 if (gcfgc & GC_LOW_FREQUENCY_ENABLE) {
165 cdclk_state->cdclk = 133333;
166 return;
167 }
168
169 switch (gcfgc & GC_DISPLAY_CLOCK_MASK) {
170 case GC_DISPLAY_CLOCK_333_320_MHZ:
171 cdclk_state->cdclk = 320000;
172 break;
173 default:
174 case GC_DISPLAY_CLOCK_190_200_MHZ:
175 cdclk_state->cdclk = 200000;
176 break;
177 }
178 }
179
180 static unsigned int intel_hpll_vco(struct drm_i915_private *dev_priv)
181 {
182 static const unsigned int blb_vco[8] = {
183 [0] = 3200000,
184 [1] = 4000000,
185 [2] = 5333333,
186 [3] = 4800000,
187 [4] = 6400000,
188 };
189 static const unsigned int pnv_vco[8] = {
190 [0] = 3200000,
191 [1] = 4000000,
192 [2] = 5333333,
193 [3] = 4800000,
194 [4] = 2666667,
195 };
196 static const unsigned int cl_vco[8] = {
197 [0] = 3200000,
198 [1] = 4000000,
199 [2] = 5333333,
200 [3] = 6400000,
201 [4] = 3333333,
202 [5] = 3566667,
203 [6] = 4266667,
204 };
205 static const unsigned int elk_vco[8] = {
206 [0] = 3200000,
207 [1] = 4000000,
208 [2] = 5333333,
209 [3] = 4800000,
210 };
211 static const unsigned int ctg_vco[8] = {
212 [0] = 3200000,
213 [1] = 4000000,
214 [2] = 5333333,
215 [3] = 6400000,
216 [4] = 2666667,
217 [5] = 4266667,
218 };
219 const unsigned int *vco_table;
220 unsigned int vco;
221 uint8_t tmp = 0;
222
223 /* FIXME other chipsets? */
224 if (IS_GM45(dev_priv))
225 vco_table = ctg_vco;
226 else if (IS_G45(dev_priv))
227 vco_table = elk_vco;
228 else if (IS_I965GM(dev_priv))
229 vco_table = cl_vco;
230 else if (IS_PINEVIEW(dev_priv))
231 vco_table = pnv_vco;
232 else if (IS_G33(dev_priv))
233 vco_table = blb_vco;
234 else
235 return 0;
236
237 tmp = I915_READ(IS_MOBILE(dev_priv) ? HPLLVCO_MOBILE : HPLLVCO);
238
239 vco = vco_table[tmp & 0x7];
240 if (vco == 0)
241 DRM_ERROR("Bad HPLL VCO (HPLLVCO=0x%02x)\n", tmp);
242 else
243 DRM_DEBUG_KMS("HPLL VCO %u kHz\n", vco);
244
245 return vco;
246 }
247
248 static void g33_get_cdclk(struct drm_i915_private *dev_priv,
249 struct intel_cdclk_state *cdclk_state)
250 {
251 struct pci_dev *pdev = dev_priv->drm.pdev;
252 static const uint8_t div_3200[] = { 12, 10, 8, 7, 5, 16 };
253 static const uint8_t div_4000[] = { 14, 12, 10, 8, 6, 20 };
254 static const uint8_t div_4800[] = { 20, 14, 12, 10, 8, 24 };
255 static const uint8_t div_5333[] = { 20, 16, 12, 12, 8, 28 };
256 const uint8_t *div_table;
257 unsigned int cdclk_sel;
258 uint16_t tmp = 0;
259
260 cdclk_state->vco = intel_hpll_vco(dev_priv);
261
262 pci_read_config_word(pdev, GCFGC, &tmp);
263
264 cdclk_sel = (tmp >> 4) & 0x7;
265
266 if (cdclk_sel >= ARRAY_SIZE(div_3200))
267 goto fail;
268
269 switch (cdclk_state->vco) {
270 case 3200000:
271 div_table = div_3200;
272 break;
273 case 4000000:
274 div_table = div_4000;
275 break;
276 case 4800000:
277 div_table = div_4800;
278 break;
279 case 5333333:
280 div_table = div_5333;
281 break;
282 default:
283 goto fail;
284 }
285
286 cdclk_state->cdclk = DIV_ROUND_CLOSEST(cdclk_state->vco,
287 div_table[cdclk_sel]);
288 return;
289
290 fail:
291 DRM_ERROR("Unable to determine CDCLK. HPLL VCO=%u kHz, CFGC=0x%08x\n",
292 cdclk_state->vco, tmp);
293 cdclk_state->cdclk = 190476;
294 }
295
296 static void pnv_get_cdclk(struct drm_i915_private *dev_priv,
297 struct intel_cdclk_state *cdclk_state)
298 {
299 struct pci_dev *pdev = dev_priv->drm.pdev;
300 u16 gcfgc = 0;
301
302 pci_read_config_word(pdev, GCFGC, &gcfgc);
303
304 switch (gcfgc & GC_DISPLAY_CLOCK_MASK) {
305 case GC_DISPLAY_CLOCK_267_MHZ_PNV:
306 cdclk_state->cdclk = 266667;
307 break;
308 case GC_DISPLAY_CLOCK_333_MHZ_PNV:
309 cdclk_state->cdclk = 333333;
310 break;
311 case GC_DISPLAY_CLOCK_444_MHZ_PNV:
312 cdclk_state->cdclk = 444444;
313 break;
314 case GC_DISPLAY_CLOCK_200_MHZ_PNV:
315 cdclk_state->cdclk = 200000;
316 break;
317 default:
318 DRM_ERROR("Unknown pnv display core clock 0x%04x\n", gcfgc);
319 case GC_DISPLAY_CLOCK_133_MHZ_PNV:
320 cdclk_state->cdclk = 133333;
321 break;
322 case GC_DISPLAY_CLOCK_167_MHZ_PNV:
323 cdclk_state->cdclk = 166667;
324 break;
325 }
326 }
327
328 static void i965gm_get_cdclk(struct drm_i915_private *dev_priv,
329 struct intel_cdclk_state *cdclk_state)
330 {
331 struct pci_dev *pdev = dev_priv->drm.pdev;
332 static const uint8_t div_3200[] = { 16, 10, 8 };
333 static const uint8_t div_4000[] = { 20, 12, 10 };
334 static const uint8_t div_5333[] = { 24, 16, 14 };
335 const uint8_t *div_table;
336 unsigned int cdclk_sel;
337 uint16_t tmp = 0;
338
339 cdclk_state->vco = intel_hpll_vco(dev_priv);
340
341 pci_read_config_word(pdev, GCFGC, &tmp);
342
343 cdclk_sel = ((tmp >> 8) & 0x1f) - 1;
344
345 if (cdclk_sel >= ARRAY_SIZE(div_3200))
346 goto fail;
347
348 switch (cdclk_state->vco) {
349 case 3200000:
350 div_table = div_3200;
351 break;
352 case 4000000:
353 div_table = div_4000;
354 break;
355 case 5333333:
356 div_table = div_5333;
357 break;
358 default:
359 goto fail;
360 }
361
362 cdclk_state->cdclk = DIV_ROUND_CLOSEST(cdclk_state->vco,
363 div_table[cdclk_sel]);
364 return;
365
366 fail:
367 DRM_ERROR("Unable to determine CDCLK. HPLL VCO=%u kHz, CFGC=0x%04x\n",
368 cdclk_state->vco, tmp);
369 cdclk_state->cdclk = 200000;
370 }
371
372 static void gm45_get_cdclk(struct drm_i915_private *dev_priv,
373 struct intel_cdclk_state *cdclk_state)
374 {
375 struct pci_dev *pdev = dev_priv->drm.pdev;
376 unsigned int cdclk_sel;
377 uint16_t tmp = 0;
378
379 cdclk_state->vco = intel_hpll_vco(dev_priv);
380
381 pci_read_config_word(pdev, GCFGC, &tmp);
382
383 cdclk_sel = (tmp >> 12) & 0x1;
384
385 switch (cdclk_state->vco) {
386 case 2666667:
387 case 4000000:
388 case 5333333:
389 cdclk_state->cdclk = cdclk_sel ? 333333 : 222222;
390 break;
391 case 3200000:
392 cdclk_state->cdclk = cdclk_sel ? 320000 : 228571;
393 break;
394 default:
395 DRM_ERROR("Unable to determine CDCLK. HPLL VCO=%u, CFGC=0x%04x\n",
396 cdclk_state->vco, tmp);
397 cdclk_state->cdclk = 222222;
398 break;
399 }
400 }
401
402 static void hsw_get_cdclk(struct drm_i915_private *dev_priv,
403 struct intel_cdclk_state *cdclk_state)
404 {
405 uint32_t lcpll = I915_READ(LCPLL_CTL);
406 uint32_t freq = lcpll & LCPLL_CLK_FREQ_MASK;
407
408 if (lcpll & LCPLL_CD_SOURCE_FCLK)
409 cdclk_state->cdclk = 800000;
410 else if (I915_READ(FUSE_STRAP) & HSW_CDCLK_LIMIT)
411 cdclk_state->cdclk = 450000;
412 else if (freq == LCPLL_CLK_FREQ_450)
413 cdclk_state->cdclk = 450000;
414 else if (IS_HSW_ULT(dev_priv))
415 cdclk_state->cdclk = 337500;
416 else
417 cdclk_state->cdclk = 540000;
418 }
419
420 static int vlv_calc_cdclk(struct drm_i915_private *dev_priv, int min_cdclk)
421 {
422 int freq_320 = (dev_priv->hpll_freq << 1) % 320000 != 0 ?
423 333333 : 320000;
424
425 /*
426 * We seem to get an unstable or solid color picture at 200MHz.
427 * Not sure what's wrong. For now use 200MHz only when all pipes
428 * are off.
429 */
430 if (IS_VALLEYVIEW(dev_priv) && min_cdclk > freq_320)
431 return 400000;
432 else if (min_cdclk > 266667)
433 return freq_320;
434 else if (min_cdclk > 0)
435 return 266667;
436 else
437 return 200000;
438 }
439
440 static u8 vlv_calc_voltage_level(struct drm_i915_private *dev_priv, int cdclk)
441 {
442 if (IS_VALLEYVIEW(dev_priv)) {
443 if (cdclk >= 320000) /* jump to highest voltage for 400MHz too */
444 return 2;
445 else if (cdclk >= 266667)
446 return 1;
447 else
448 return 0;
449 } else {
450 /*
451 * Specs are full of misinformation, but testing on actual
452 * hardware has shown that we just need to write the desired
453 * CCK divider into the Punit register.
454 */
455 return DIV_ROUND_CLOSEST(dev_priv->hpll_freq << 1, cdclk) - 1;
456 }
457 }
458
459 static void vlv_get_cdclk(struct drm_i915_private *dev_priv,
460 struct intel_cdclk_state *cdclk_state)
461 {
462 u32 val;
463
464 cdclk_state->vco = vlv_get_hpll_vco(dev_priv);
465 cdclk_state->cdclk = vlv_get_cck_clock(dev_priv, "cdclk",
466 CCK_DISPLAY_CLOCK_CONTROL,
467 cdclk_state->vco);
468
469 mutex_lock(&dev_priv->pcu_lock);
470 val = vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ);
471 mutex_unlock(&dev_priv->pcu_lock);
472
473 if (IS_VALLEYVIEW(dev_priv))
474 cdclk_state->voltage_level = (val & DSPFREQGUAR_MASK) >>
475 DSPFREQGUAR_SHIFT;
476 else
477 cdclk_state->voltage_level = (val & DSPFREQGUAR_MASK_CHV) >>
478 DSPFREQGUAR_SHIFT_CHV;
479 }
480
481 static void vlv_program_pfi_credits(struct drm_i915_private *dev_priv)
482 {
483 unsigned int credits, default_credits;
484
485 if (IS_CHERRYVIEW(dev_priv))
486 default_credits = PFI_CREDIT(12);
487 else
488 default_credits = PFI_CREDIT(8);
489
490 if (dev_priv->cdclk.hw.cdclk >= dev_priv->czclk_freq) {
491 /* CHV suggested value is 31 or 63 */
492 if (IS_CHERRYVIEW(dev_priv))
493 credits = PFI_CREDIT_63;
494 else
495 credits = PFI_CREDIT(15);
496 } else {
497 credits = default_credits;
498 }
499
500 /*
501 * WA - write default credits before re-programming
502 * FIXME: should we also set the resend bit here?
503 */
504 I915_WRITE(GCI_CONTROL, VGA_FAST_MODE_DISABLE |
505 default_credits);
506
507 I915_WRITE(GCI_CONTROL, VGA_FAST_MODE_DISABLE |
508 credits | PFI_CREDIT_RESEND);
509
510 /*
511 * FIXME is this guaranteed to clear
512 * immediately or should we poll for it?
513 */
514 WARN_ON(I915_READ(GCI_CONTROL) & PFI_CREDIT_RESEND);
515 }
516
517 static void vlv_set_cdclk(struct drm_i915_private *dev_priv,
518 const struct intel_cdclk_state *cdclk_state)
519 {
520 int cdclk = cdclk_state->cdclk;
521 u32 val, cmd = cdclk_state->voltage_level;
522
523 switch (cdclk) {
524 case 400000:
525 case 333333:
526 case 320000:
527 case 266667:
528 case 200000:
529 break;
530 default:
531 MISSING_CASE(cdclk);
532 return;
533 }
534
535 /* There are cases where we can end up here with power domains
536 * off and a CDCLK frequency other than the minimum, like when
537 * issuing a modeset without actually changing any display after
538 * a system suspend. So grab the PIPE-A domain, which covers
539 * the HW blocks needed for the following programming.
540 */
541 intel_display_power_get(dev_priv, POWER_DOMAIN_PIPE_A);
542
543 mutex_lock(&dev_priv->pcu_lock);
544 val = vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ);
545 val &= ~DSPFREQGUAR_MASK;
546 val |= (cmd << DSPFREQGUAR_SHIFT);
547 vlv_punit_write(dev_priv, PUNIT_REG_DSPFREQ, val);
548 if (wait_for((vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ) &
549 DSPFREQSTAT_MASK) == (cmd << DSPFREQSTAT_SHIFT),
550 50)) {
551 DRM_ERROR("timed out waiting for CDclk change\n");
552 }
553 mutex_unlock(&dev_priv->pcu_lock);
554
555 mutex_lock(&dev_priv->sb_lock);
556
557 if (cdclk == 400000) {
558 u32 divider;
559
560 divider = DIV_ROUND_CLOSEST(dev_priv->hpll_freq << 1,
561 cdclk) - 1;
562
563 /* adjust cdclk divider */
564 val = vlv_cck_read(dev_priv, CCK_DISPLAY_CLOCK_CONTROL);
565 val &= ~CCK_FREQUENCY_VALUES;
566 val |= divider;
567 vlv_cck_write(dev_priv, CCK_DISPLAY_CLOCK_CONTROL, val);
568
569 if (wait_for((vlv_cck_read(dev_priv, CCK_DISPLAY_CLOCK_CONTROL) &
570 CCK_FREQUENCY_STATUS) == (divider << CCK_FREQUENCY_STATUS_SHIFT),
571 50))
572 DRM_ERROR("timed out waiting for CDclk change\n");
573 }
574
575 /* adjust self-refresh exit latency value */
576 val = vlv_bunit_read(dev_priv, BUNIT_REG_BISOC);
577 val &= ~0x7f;
578
579 /*
580 * For high bandwidth configs, we set a higher latency in the bunit
581 * so that the core display fetch happens in time to avoid underruns.
582 */
583 if (cdclk == 400000)
584 val |= 4500 / 250; /* 4.5 usec */
585 else
586 val |= 3000 / 250; /* 3.0 usec */
587 vlv_bunit_write(dev_priv, BUNIT_REG_BISOC, val);
588
589 mutex_unlock(&dev_priv->sb_lock);
590
591 intel_update_cdclk(dev_priv);
592
593 vlv_program_pfi_credits(dev_priv);
594
595 intel_display_power_put(dev_priv, POWER_DOMAIN_PIPE_A);
596 }
597
598 static void chv_set_cdclk(struct drm_i915_private *dev_priv,
599 const struct intel_cdclk_state *cdclk_state)
600 {
601 int cdclk = cdclk_state->cdclk;
602 u32 val, cmd = cdclk_state->voltage_level;
603
604 switch (cdclk) {
605 case 333333:
606 case 320000:
607 case 266667:
608 case 200000:
609 break;
610 default:
611 MISSING_CASE(cdclk);
612 return;
613 }
614
615 /* There are cases where we can end up here with power domains
616 * off and a CDCLK frequency other than the minimum, like when
617 * issuing a modeset without actually changing any display after
618 * a system suspend. So grab the PIPE-A domain, which covers
619 * the HW blocks needed for the following programming.
620 */
621 intel_display_power_get(dev_priv, POWER_DOMAIN_PIPE_A);
622
623 mutex_lock(&dev_priv->pcu_lock);
624 val = vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ);
625 val &= ~DSPFREQGUAR_MASK_CHV;
626 val |= (cmd << DSPFREQGUAR_SHIFT_CHV);
627 vlv_punit_write(dev_priv, PUNIT_REG_DSPFREQ, val);
628 if (wait_for((vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ) &
629 DSPFREQSTAT_MASK_CHV) == (cmd << DSPFREQSTAT_SHIFT_CHV),
630 50)) {
631 DRM_ERROR("timed out waiting for CDclk change\n");
632 }
633 mutex_unlock(&dev_priv->pcu_lock);
634
635 intel_update_cdclk(dev_priv);
636
637 vlv_program_pfi_credits(dev_priv);
638
639 intel_display_power_put(dev_priv, POWER_DOMAIN_PIPE_A);
640 }
641
642 static int bdw_calc_cdclk(int min_cdclk)
643 {
644 if (min_cdclk > 540000)
645 return 675000;
646 else if (min_cdclk > 450000)
647 return 540000;
648 else if (min_cdclk > 337500)
649 return 450000;
650 else
651 return 337500;
652 }
653
654 static u8 bdw_calc_voltage_level(int cdclk)
655 {
656 switch (cdclk) {
657 default:
658 case 337500:
659 return 2;
660 case 450000:
661 return 0;
662 case 540000:
663 return 1;
664 case 675000:
665 return 3;
666 }
667 }
668
669 static void bdw_get_cdclk(struct drm_i915_private *dev_priv,
670 struct intel_cdclk_state *cdclk_state)
671 {
672 uint32_t lcpll = I915_READ(LCPLL_CTL);
673 uint32_t freq = lcpll & LCPLL_CLK_FREQ_MASK;
674
675 if (lcpll & LCPLL_CD_SOURCE_FCLK)
676 cdclk_state->cdclk = 800000;
677 else if (I915_READ(FUSE_STRAP) & HSW_CDCLK_LIMIT)
678 cdclk_state->cdclk = 450000;
679 else if (freq == LCPLL_CLK_FREQ_450)
680 cdclk_state->cdclk = 450000;
681 else if (freq == LCPLL_CLK_FREQ_54O_BDW)
682 cdclk_state->cdclk = 540000;
683 else if (freq == LCPLL_CLK_FREQ_337_5_BDW)
684 cdclk_state->cdclk = 337500;
685 else
686 cdclk_state->cdclk = 675000;
687
688 /*
689 * Can't read this out :( Let's assume it's
690 * at least what the CDCLK frequency requires.
691 */
692 cdclk_state->voltage_level =
693 bdw_calc_voltage_level(cdclk_state->cdclk);
694 }
695
696 static void bdw_set_cdclk(struct drm_i915_private *dev_priv,
697 const struct intel_cdclk_state *cdclk_state)
698 {
699 int cdclk = cdclk_state->cdclk;
700 uint32_t val;
701 int ret;
702
703 if (WARN((I915_READ(LCPLL_CTL) &
704 (LCPLL_PLL_DISABLE | LCPLL_PLL_LOCK |
705 LCPLL_CD_CLOCK_DISABLE | LCPLL_ROOT_CD_CLOCK_DISABLE |
706 LCPLL_CD2X_CLOCK_DISABLE | LCPLL_POWER_DOWN_ALLOW |
707 LCPLL_CD_SOURCE_FCLK)) != LCPLL_PLL_LOCK,
708 "trying to change cdclk frequency with cdclk not enabled\n"))
709 return;
710
711 mutex_lock(&dev_priv->pcu_lock);
712 ret = sandybridge_pcode_write(dev_priv,
713 BDW_PCODE_DISPLAY_FREQ_CHANGE_REQ, 0x0);
714 mutex_unlock(&dev_priv->pcu_lock);
715 if (ret) {
716 DRM_ERROR("failed to inform pcode about cdclk change\n");
717 return;
718 }
719
720 val = I915_READ(LCPLL_CTL);
721 val |= LCPLL_CD_SOURCE_FCLK;
722 I915_WRITE(LCPLL_CTL, val);
723
724 /*
725 * According to the spec, it should be enough to poll for this 1 us.
726 * However, extensive testing shows that this can take longer.
727 */
728 if (wait_for_us(I915_READ(LCPLL_CTL) &
729 LCPLL_CD_SOURCE_FCLK_DONE, 100))
730 DRM_ERROR("Switching to FCLK failed\n");
731
732 val = I915_READ(LCPLL_CTL);
733 val &= ~LCPLL_CLK_FREQ_MASK;
734
735 switch (cdclk) {
736 default:
737 MISSING_CASE(cdclk);
738 /* fall through */
739 case 337500:
740 val |= LCPLL_CLK_FREQ_337_5_BDW;
741 break;
742 case 450000:
743 val |= LCPLL_CLK_FREQ_450;
744 break;
745 case 540000:
746 val |= LCPLL_CLK_FREQ_54O_BDW;
747 break;
748 case 675000:
749 val |= LCPLL_CLK_FREQ_675_BDW;
750 break;
751 }
752
753 I915_WRITE(LCPLL_CTL, val);
754
755 val = I915_READ(LCPLL_CTL);
756 val &= ~LCPLL_CD_SOURCE_FCLK;
757 I915_WRITE(LCPLL_CTL, val);
758
759 if (wait_for_us((I915_READ(LCPLL_CTL) &
760 LCPLL_CD_SOURCE_FCLK_DONE) == 0, 1))
761 DRM_ERROR("Switching back to LCPLL failed\n");
762
763 mutex_lock(&dev_priv->pcu_lock);
764 sandybridge_pcode_write(dev_priv, HSW_PCODE_DE_WRITE_FREQ_REQ,
765 cdclk_state->voltage_level);
766 mutex_unlock(&dev_priv->pcu_lock);
767
768 I915_WRITE(CDCLK_FREQ, DIV_ROUND_CLOSEST(cdclk, 1000) - 1);
769
770 intel_update_cdclk(dev_priv);
771 }
772
773 static int skl_calc_cdclk(int min_cdclk, int vco)
774 {
775 if (vco == 8640000) {
776 if (min_cdclk > 540000)
777 return 617143;
778 else if (min_cdclk > 432000)
779 return 540000;
780 else if (min_cdclk > 308571)
781 return 432000;
782 else
783 return 308571;
784 } else {
785 if (min_cdclk > 540000)
786 return 675000;
787 else if (min_cdclk > 450000)
788 return 540000;
789 else if (min_cdclk > 337500)
790 return 450000;
791 else
792 return 337500;
793 }
794 }
795
796 static u8 skl_calc_voltage_level(int cdclk)
797 {
798 switch (cdclk) {
799 default:
800 case 308571:
801 case 337500:
802 return 0;
803 case 450000:
804 case 432000:
805 return 1;
806 case 540000:
807 return 2;
808 case 617143:
809 case 675000:
810 return 3;
811 }
812 }
813
814 static void skl_dpll0_update(struct drm_i915_private *dev_priv,
815 struct intel_cdclk_state *cdclk_state)
816 {
817 u32 val;
818
819 cdclk_state->ref = 24000;
820 cdclk_state->vco = 0;
821
822 val = I915_READ(LCPLL1_CTL);
823 if ((val & LCPLL_PLL_ENABLE) == 0)
824 return;
825
826 if (WARN_ON((val & LCPLL_PLL_LOCK) == 0))
827 return;
828
829 val = I915_READ(DPLL_CTRL1);
830
831 if (WARN_ON((val & (DPLL_CTRL1_HDMI_MODE(SKL_DPLL0) |
832 DPLL_CTRL1_SSC(SKL_DPLL0) |
833 DPLL_CTRL1_OVERRIDE(SKL_DPLL0))) !=
834 DPLL_CTRL1_OVERRIDE(SKL_DPLL0)))
835 return;
836
837 switch (val & DPLL_CTRL1_LINK_RATE_MASK(SKL_DPLL0)) {
838 case DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_810, SKL_DPLL0):
839 case DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_1350, SKL_DPLL0):
840 case DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_1620, SKL_DPLL0):
841 case DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_2700, SKL_DPLL0):
842 cdclk_state->vco = 8100000;
843 break;
844 case DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_1080, SKL_DPLL0):
845 case DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_2160, SKL_DPLL0):
846 cdclk_state->vco = 8640000;
847 break;
848 default:
849 MISSING_CASE(val & DPLL_CTRL1_LINK_RATE_MASK(SKL_DPLL0));
850 break;
851 }
852 }
853
854 static void skl_get_cdclk(struct drm_i915_private *dev_priv,
855 struct intel_cdclk_state *cdclk_state)
856 {
857 u32 cdctl;
858
859 skl_dpll0_update(dev_priv, cdclk_state);
860
861 cdclk_state->cdclk = cdclk_state->ref;
862
863 if (cdclk_state->vco == 0)
864 goto out;
865
866 cdctl = I915_READ(CDCLK_CTL);
867
868 if (cdclk_state->vco == 8640000) {
869 switch (cdctl & CDCLK_FREQ_SEL_MASK) {
870 case CDCLK_FREQ_450_432:
871 cdclk_state->cdclk = 432000;
872 break;
873 case CDCLK_FREQ_337_308:
874 cdclk_state->cdclk = 308571;
875 break;
876 case CDCLK_FREQ_540:
877 cdclk_state->cdclk = 540000;
878 break;
879 case CDCLK_FREQ_675_617:
880 cdclk_state->cdclk = 617143;
881 break;
882 default:
883 MISSING_CASE(cdctl & CDCLK_FREQ_SEL_MASK);
884 break;
885 }
886 } else {
887 switch (cdctl & CDCLK_FREQ_SEL_MASK) {
888 case CDCLK_FREQ_450_432:
889 cdclk_state->cdclk = 450000;
890 break;
891 case CDCLK_FREQ_337_308:
892 cdclk_state->cdclk = 337500;
893 break;
894 case CDCLK_FREQ_540:
895 cdclk_state->cdclk = 540000;
896 break;
897 case CDCLK_FREQ_675_617:
898 cdclk_state->cdclk = 675000;
899 break;
900 default:
901 MISSING_CASE(cdctl & CDCLK_FREQ_SEL_MASK);
902 break;
903 }
904 }
905
906 out:
907 /*
908 * Can't read this out :( Let's assume it's
909 * at least what the CDCLK frequency requires.
910 */
911 cdclk_state->voltage_level =
912 skl_calc_voltage_level(cdclk_state->cdclk);
913 }
914
915 /* convert from kHz to .1 fixpoint MHz with -1MHz offset */
916 static int skl_cdclk_decimal(int cdclk)
917 {
918 return DIV_ROUND_CLOSEST(cdclk - 1000, 500);
919 }
920
921 static void skl_set_preferred_cdclk_vco(struct drm_i915_private *dev_priv,
922 int vco)
923 {
924 bool changed = dev_priv->skl_preferred_vco_freq != vco;
925
926 dev_priv->skl_preferred_vco_freq = vco;
927
928 if (changed)
929 intel_update_max_cdclk(dev_priv);
930 }
931
932 static void skl_dpll0_enable(struct drm_i915_private *dev_priv, int vco)
933 {
934 u32 val;
935
936 WARN_ON(vco != 8100000 && vco != 8640000);
937
938 /*
939 * We always enable DPLL0 with the lowest link rate possible, but still
940 * taking into account the VCO required to operate the eDP panel at the
941 * desired frequency. The usual DP link rates operate with a VCO of
942 * 8100 while the eDP 1.4 alternate link rates need a VCO of 8640.
943 * The modeset code is responsible for the selection of the exact link
944 * rate later on, with the constraint of choosing a frequency that
945 * works with vco.
946 */
947 val = I915_READ(DPLL_CTRL1);
948
949 val &= ~(DPLL_CTRL1_HDMI_MODE(SKL_DPLL0) | DPLL_CTRL1_SSC(SKL_DPLL0) |
950 DPLL_CTRL1_LINK_RATE_MASK(SKL_DPLL0));
951 val |= DPLL_CTRL1_OVERRIDE(SKL_DPLL0);
952 if (vco == 8640000)
953 val |= DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_1080,
954 SKL_DPLL0);
955 else
956 val |= DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_810,
957 SKL_DPLL0);
958
959 I915_WRITE(DPLL_CTRL1, val);
960 POSTING_READ(DPLL_CTRL1);
961
962 I915_WRITE(LCPLL1_CTL, I915_READ(LCPLL1_CTL) | LCPLL_PLL_ENABLE);
963
964 if (intel_wait_for_register(dev_priv,
965 LCPLL1_CTL, LCPLL_PLL_LOCK, LCPLL_PLL_LOCK,
966 5))
967 DRM_ERROR("DPLL0 not locked\n");
968
969 dev_priv->cdclk.hw.vco = vco;
970
971 /* We'll want to keep using the current vco from now on. */
972 skl_set_preferred_cdclk_vco(dev_priv, vco);
973 }
974
975 static void skl_dpll0_disable(struct drm_i915_private *dev_priv)
976 {
977 I915_WRITE(LCPLL1_CTL, I915_READ(LCPLL1_CTL) & ~LCPLL_PLL_ENABLE);
978 if (intel_wait_for_register(dev_priv,
979 LCPLL1_CTL, LCPLL_PLL_LOCK, 0,
980 1))
981 DRM_ERROR("Couldn't disable DPLL0\n");
982
983 dev_priv->cdclk.hw.vco = 0;
984 }
985
986 static void skl_set_cdclk(struct drm_i915_private *dev_priv,
987 const struct intel_cdclk_state *cdclk_state)
988 {
989 int cdclk = cdclk_state->cdclk;
990 int vco = cdclk_state->vco;
991 u32 freq_select, cdclk_ctl;
992 int ret;
993
994 mutex_lock(&dev_priv->pcu_lock);
995 ret = skl_pcode_request(dev_priv, SKL_PCODE_CDCLK_CONTROL,
996 SKL_CDCLK_PREPARE_FOR_CHANGE,
997 SKL_CDCLK_READY_FOR_CHANGE,
998 SKL_CDCLK_READY_FOR_CHANGE, 3);
999 mutex_unlock(&dev_priv->pcu_lock);
1000 if (ret) {
1001 DRM_ERROR("Failed to inform PCU about cdclk change (%d)\n",
1002 ret);
1003 return;
1004 }
1005
1006 /* Choose frequency for this cdclk */
1007 switch (cdclk) {
1008 default:
1009 WARN_ON(cdclk != dev_priv->cdclk.hw.ref);
1010 WARN_ON(vco != 0);
1011 /* fall through */
1012 case 308571:
1013 case 337500:
1014 freq_select = CDCLK_FREQ_337_308;
1015 break;
1016 case 450000:
1017 case 432000:
1018 freq_select = CDCLK_FREQ_450_432;
1019 break;
1020 case 540000:
1021 freq_select = CDCLK_FREQ_540;
1022 break;
1023 case 617143:
1024 case 675000:
1025 freq_select = CDCLK_FREQ_675_617;
1026 break;
1027 }
1028
1029 if (dev_priv->cdclk.hw.vco != 0 &&
1030 dev_priv->cdclk.hw.vco != vco)
1031 skl_dpll0_disable(dev_priv);
1032
1033 cdclk_ctl = I915_READ(CDCLK_CTL);
1034
1035 if (dev_priv->cdclk.hw.vco != vco) {
1036 /* Wa Display #1183: skl,kbl,cfl */
1037 cdclk_ctl &= ~(CDCLK_FREQ_SEL_MASK | CDCLK_FREQ_DECIMAL_MASK);
1038 cdclk_ctl |= freq_select | skl_cdclk_decimal(cdclk);
1039 I915_WRITE(CDCLK_CTL, cdclk_ctl);
1040 }
1041
1042 /* Wa Display #1183: skl,kbl,cfl */
1043 cdclk_ctl |= CDCLK_DIVMUX_CD_OVERRIDE;
1044 I915_WRITE(CDCLK_CTL, cdclk_ctl);
1045 POSTING_READ(CDCLK_CTL);
1046
1047 if (dev_priv->cdclk.hw.vco != vco)
1048 skl_dpll0_enable(dev_priv, vco);
1049
1050 /* Wa Display #1183: skl,kbl,cfl */
1051 cdclk_ctl &= ~(CDCLK_FREQ_SEL_MASK | CDCLK_FREQ_DECIMAL_MASK);
1052 I915_WRITE(CDCLK_CTL, cdclk_ctl);
1053
1054 cdclk_ctl |= freq_select | skl_cdclk_decimal(cdclk);
1055 I915_WRITE(CDCLK_CTL, cdclk_ctl);
1056
1057 /* Wa Display #1183: skl,kbl,cfl */
1058 cdclk_ctl &= ~CDCLK_DIVMUX_CD_OVERRIDE;
1059 I915_WRITE(CDCLK_CTL, cdclk_ctl);
1060 POSTING_READ(CDCLK_CTL);
1061
1062 /* inform PCU of the change */
1063 mutex_lock(&dev_priv->pcu_lock);
1064 sandybridge_pcode_write(dev_priv, SKL_PCODE_CDCLK_CONTROL,
1065 cdclk_state->voltage_level);
1066 mutex_unlock(&dev_priv->pcu_lock);
1067
1068 intel_update_cdclk(dev_priv);
1069 }
1070
1071 static void skl_sanitize_cdclk(struct drm_i915_private *dev_priv)
1072 {
1073 uint32_t cdctl, expected;
1074
1075 /*
1076 * check if the pre-os initialized the display
1077 * There is SWF18 scratchpad register defined which is set by the
1078 * pre-os which can be used by the OS drivers to check the status
1079 */
1080 if ((I915_READ(SWF_ILK(0x18)) & 0x00FFFFFF) == 0)
1081 goto sanitize;
1082
1083 intel_update_cdclk(dev_priv);
1084 intel_dump_cdclk_state(&dev_priv->cdclk.hw, "Current CDCLK");
1085
1086 /* Is PLL enabled and locked ? */
1087 if (dev_priv->cdclk.hw.vco == 0 ||
1088 dev_priv->cdclk.hw.cdclk == dev_priv->cdclk.hw.ref)
1089 goto sanitize;
1090
1091 /* DPLL okay; verify the cdclock
1092 *
1093 * Noticed in some instances that the freq selection is correct but
1094 * decimal part is programmed wrong from BIOS where pre-os does not
1095 * enable display. Verify the same as well.
1096 */
1097 cdctl = I915_READ(CDCLK_CTL);
1098 expected = (cdctl & CDCLK_FREQ_SEL_MASK) |
1099 skl_cdclk_decimal(dev_priv->cdclk.hw.cdclk);
1100 if (cdctl == expected)
1101 /* All well; nothing to sanitize */
1102 return;
1103
1104 sanitize:
1105 DRM_DEBUG_KMS("Sanitizing cdclk programmed by pre-os\n");
1106
1107 /* force cdclk programming */
1108 dev_priv->cdclk.hw.cdclk = 0;
1109 /* force full PLL disable + enable */
1110 dev_priv->cdclk.hw.vco = -1;
1111 }
1112
1113 /**
1114 * skl_init_cdclk - Initialize CDCLK on SKL
1115 * @dev_priv: i915 device
1116 *
1117 * Initialize CDCLK for SKL and derivatives. This is generally
1118 * done only during the display core initialization sequence,
1119 * after which the DMC will take care of turning CDCLK off/on
1120 * as needed.
1121 */
1122 void skl_init_cdclk(struct drm_i915_private *dev_priv)
1123 {
1124 struct intel_cdclk_state cdclk_state;
1125
1126 skl_sanitize_cdclk(dev_priv);
1127
1128 if (dev_priv->cdclk.hw.cdclk != 0 &&
1129 dev_priv->cdclk.hw.vco != 0) {
1130 /*
1131 * Use the current vco as our initial
1132 * guess as to what the preferred vco is.
1133 */
1134 if (dev_priv->skl_preferred_vco_freq == 0)
1135 skl_set_preferred_cdclk_vco(dev_priv,
1136 dev_priv->cdclk.hw.vco);
1137 return;
1138 }
1139
1140 cdclk_state = dev_priv->cdclk.hw;
1141
1142 cdclk_state.vco = dev_priv->skl_preferred_vco_freq;
1143 if (cdclk_state.vco == 0)
1144 cdclk_state.vco = 8100000;
1145 cdclk_state.cdclk = skl_calc_cdclk(0, cdclk_state.vco);
1146 cdclk_state.voltage_level = skl_calc_voltage_level(cdclk_state.cdclk);
1147
1148 skl_set_cdclk(dev_priv, &cdclk_state);
1149 }
1150
1151 /**
1152 * skl_uninit_cdclk - Uninitialize CDCLK on SKL
1153 * @dev_priv: i915 device
1154 *
1155 * Uninitialize CDCLK for SKL and derivatives. This is done only
1156 * during the display core uninitialization sequence.
1157 */
1158 void skl_uninit_cdclk(struct drm_i915_private *dev_priv)
1159 {
1160 struct intel_cdclk_state cdclk_state = dev_priv->cdclk.hw;
1161
1162 cdclk_state.cdclk = cdclk_state.ref;
1163 cdclk_state.vco = 0;
1164 cdclk_state.voltage_level = skl_calc_voltage_level(cdclk_state.cdclk);
1165
1166 skl_set_cdclk(dev_priv, &cdclk_state);
1167 }
1168
1169 static int bxt_calc_cdclk(int min_cdclk)
1170 {
1171 if (min_cdclk > 576000)
1172 return 624000;
1173 else if (min_cdclk > 384000)
1174 return 576000;
1175 else if (min_cdclk > 288000)
1176 return 384000;
1177 else if (min_cdclk > 144000)
1178 return 288000;
1179 else
1180 return 144000;
1181 }
1182
1183 static int glk_calc_cdclk(int min_cdclk)
1184 {
1185 if (min_cdclk > 158400)
1186 return 316800;
1187 else if (min_cdclk > 79200)
1188 return 158400;
1189 else
1190 return 79200;
1191 }
1192
1193 static u8 bxt_calc_voltage_level(int cdclk)
1194 {
1195 return DIV_ROUND_UP(cdclk, 25000);
1196 }
1197
1198 static int bxt_de_pll_vco(struct drm_i915_private *dev_priv, int cdclk)
1199 {
1200 int ratio;
1201
1202 if (cdclk == dev_priv->cdclk.hw.ref)
1203 return 0;
1204
1205 switch (cdclk) {
1206 default:
1207 MISSING_CASE(cdclk);
1208 /* fall through */
1209 case 144000:
1210 case 288000:
1211 case 384000:
1212 case 576000:
1213 ratio = 60;
1214 break;
1215 case 624000:
1216 ratio = 65;
1217 break;
1218 }
1219
1220 return dev_priv->cdclk.hw.ref * ratio;
1221 }
1222
1223 static int glk_de_pll_vco(struct drm_i915_private *dev_priv, int cdclk)
1224 {
1225 int ratio;
1226
1227 if (cdclk == dev_priv->cdclk.hw.ref)
1228 return 0;
1229
1230 switch (cdclk) {
1231 default:
1232 MISSING_CASE(cdclk);
1233 /* fall through */
1234 case 79200:
1235 case 158400:
1236 case 316800:
1237 ratio = 33;
1238 break;
1239 }
1240
1241 return dev_priv->cdclk.hw.ref * ratio;
1242 }
1243
1244 static void bxt_de_pll_update(struct drm_i915_private *dev_priv,
1245 struct intel_cdclk_state *cdclk_state)
1246 {
1247 u32 val;
1248
1249 cdclk_state->ref = 19200;
1250 cdclk_state->vco = 0;
1251
1252 val = I915_READ(BXT_DE_PLL_ENABLE);
1253 if ((val & BXT_DE_PLL_PLL_ENABLE) == 0)
1254 return;
1255
1256 if (WARN_ON((val & BXT_DE_PLL_LOCK) == 0))
1257 return;
1258
1259 val = I915_READ(BXT_DE_PLL_CTL);
1260 cdclk_state->vco = (val & BXT_DE_PLL_RATIO_MASK) * cdclk_state->ref;
1261 }
1262
1263 static void bxt_get_cdclk(struct drm_i915_private *dev_priv,
1264 struct intel_cdclk_state *cdclk_state)
1265 {
1266 u32 divider;
1267 int div;
1268
1269 bxt_de_pll_update(dev_priv, cdclk_state);
1270
1271 cdclk_state->cdclk = cdclk_state->ref;
1272
1273 if (cdclk_state->vco == 0)
1274 goto out;
1275
1276 divider = I915_READ(CDCLK_CTL) & BXT_CDCLK_CD2X_DIV_SEL_MASK;
1277
1278 switch (divider) {
1279 case BXT_CDCLK_CD2X_DIV_SEL_1:
1280 div = 2;
1281 break;
1282 case BXT_CDCLK_CD2X_DIV_SEL_1_5:
1283 WARN(IS_GEMINILAKE(dev_priv), "Unsupported divider\n");
1284 div = 3;
1285 break;
1286 case BXT_CDCLK_CD2X_DIV_SEL_2:
1287 div = 4;
1288 break;
1289 case BXT_CDCLK_CD2X_DIV_SEL_4:
1290 div = 8;
1291 break;
1292 default:
1293 MISSING_CASE(divider);
1294 return;
1295 }
1296
1297 cdclk_state->cdclk = DIV_ROUND_CLOSEST(cdclk_state->vco, div);
1298
1299 out:
1300 /*
1301 * Can't read this out :( Let's assume it's
1302 * at least what the CDCLK frequency requires.
1303 */
1304 cdclk_state->voltage_level =
1305 bxt_calc_voltage_level(cdclk_state->cdclk);
1306 }
1307
1308 static void bxt_de_pll_disable(struct drm_i915_private *dev_priv)
1309 {
1310 I915_WRITE(BXT_DE_PLL_ENABLE, 0);
1311
1312 /* Timeout 200us */
1313 if (intel_wait_for_register(dev_priv,
1314 BXT_DE_PLL_ENABLE, BXT_DE_PLL_LOCK, 0,
1315 1))
1316 DRM_ERROR("timeout waiting for DE PLL unlock\n");
1317
1318 dev_priv->cdclk.hw.vco = 0;
1319 }
1320
1321 static void bxt_de_pll_enable(struct drm_i915_private *dev_priv, int vco)
1322 {
1323 int ratio = DIV_ROUND_CLOSEST(vco, dev_priv->cdclk.hw.ref);
1324 u32 val;
1325
1326 val = I915_READ(BXT_DE_PLL_CTL);
1327 val &= ~BXT_DE_PLL_RATIO_MASK;
1328 val |= BXT_DE_PLL_RATIO(ratio);
1329 I915_WRITE(BXT_DE_PLL_CTL, val);
1330
1331 I915_WRITE(BXT_DE_PLL_ENABLE, BXT_DE_PLL_PLL_ENABLE);
1332
1333 /* Timeout 200us */
1334 if (intel_wait_for_register(dev_priv,
1335 BXT_DE_PLL_ENABLE,
1336 BXT_DE_PLL_LOCK,
1337 BXT_DE_PLL_LOCK,
1338 1))
1339 DRM_ERROR("timeout waiting for DE PLL lock\n");
1340
1341 dev_priv->cdclk.hw.vco = vco;
1342 }
1343
1344 static void bxt_set_cdclk(struct drm_i915_private *dev_priv,
1345 const struct intel_cdclk_state *cdclk_state)
1346 {
1347 int cdclk = cdclk_state->cdclk;
1348 int vco = cdclk_state->vco;
1349 u32 val, divider;
1350 int ret;
1351
1352 /* cdclk = vco / 2 / div{1,1.5,2,4} */
1353 switch (DIV_ROUND_CLOSEST(vco, cdclk)) {
1354 default:
1355 WARN_ON(cdclk != dev_priv->cdclk.hw.ref);
1356 WARN_ON(vco != 0);
1357 /* fall through */
1358 case 2:
1359 divider = BXT_CDCLK_CD2X_DIV_SEL_1;
1360 break;
1361 case 3:
1362 WARN(IS_GEMINILAKE(dev_priv), "Unsupported divider\n");
1363 divider = BXT_CDCLK_CD2X_DIV_SEL_1_5;
1364 break;
1365 case 4:
1366 divider = BXT_CDCLK_CD2X_DIV_SEL_2;
1367 break;
1368 case 8:
1369 divider = BXT_CDCLK_CD2X_DIV_SEL_4;
1370 break;
1371 }
1372
1373 /*
1374 * Inform power controller of upcoming frequency change. BSpec
1375 * requires us to wait up to 150usec, but that leads to timeouts;
1376 * the 2ms used here is based on experiment.
1377 */
1378 mutex_lock(&dev_priv->pcu_lock);
1379 ret = sandybridge_pcode_write_timeout(dev_priv,
1380 HSW_PCODE_DE_WRITE_FREQ_REQ,
1381 0x80000000, 2000);
1382 mutex_unlock(&dev_priv->pcu_lock);
1383
1384 if (ret) {
1385 DRM_ERROR("PCode CDCLK freq change notify failed (err %d, freq %d)\n",
1386 ret, cdclk);
1387 return;
1388 }
1389
1390 if (dev_priv->cdclk.hw.vco != 0 &&
1391 dev_priv->cdclk.hw.vco != vco)
1392 bxt_de_pll_disable(dev_priv);
1393
1394 if (dev_priv->cdclk.hw.vco != vco)
1395 bxt_de_pll_enable(dev_priv, vco);
1396
1397 val = divider | skl_cdclk_decimal(cdclk);
1398 /*
1399 * FIXME if only the cd2x divider needs changing, it could be done
1400 * without shutting off the pipe (if only one pipe is active).
1401 */
1402 val |= BXT_CDCLK_CD2X_PIPE_NONE;
1403 /*
1404 * Disable SSA Precharge when CD clock frequency < 500 MHz,
1405 * enable otherwise.
1406 */
1407 if (cdclk >= 500000)
1408 val |= BXT_CDCLK_SSA_PRECHARGE_ENABLE;
1409 I915_WRITE(CDCLK_CTL, val);
1410
1411 mutex_lock(&dev_priv->pcu_lock);
1412 /*
1413 * The timeout isn't specified, the 2ms used here is based on
1414 * experiment.
1415 * FIXME: Waiting for the request completion could be delayed until
1416 * the next PCODE request based on BSpec.
1417 */
1418 ret = sandybridge_pcode_write_timeout(dev_priv,
1419 HSW_PCODE_DE_WRITE_FREQ_REQ,
1420 cdclk_state->voltage_level, 2000);
1421 mutex_unlock(&dev_priv->pcu_lock);
1422
1423 if (ret) {
1424 DRM_ERROR("PCode CDCLK freq set failed, (err %d, freq %d)\n",
1425 ret, cdclk);
1426 return;
1427 }
1428
1429 intel_update_cdclk(dev_priv);
1430 }
1431
1432 static void bxt_sanitize_cdclk(struct drm_i915_private *dev_priv)
1433 {
1434 u32 cdctl, expected;
1435
1436 intel_update_cdclk(dev_priv);
1437 intel_dump_cdclk_state(&dev_priv->cdclk.hw, "Current CDCLK");
1438
1439 if (dev_priv->cdclk.hw.vco == 0 ||
1440 dev_priv->cdclk.hw.cdclk == dev_priv->cdclk.hw.ref)
1441 goto sanitize;
1442
1443 /* DPLL okay; verify the cdclock
1444 *
1445 * Some BIOS versions leave an incorrect decimal frequency value and
1446 * set reserved MBZ bits in CDCLK_CTL at least during exiting from S4,
1447 * so sanitize this register.
1448 */
1449 cdctl = I915_READ(CDCLK_CTL);
1450 /*
1451 * Let's ignore the pipe field, since BIOS could have configured the
1452 * dividers both synching to an active pipe, or asynchronously
1453 * (PIPE_NONE).
1454 */
1455 cdctl &= ~BXT_CDCLK_CD2X_PIPE_NONE;
1456
1457 expected = (cdctl & BXT_CDCLK_CD2X_DIV_SEL_MASK) |
1458 skl_cdclk_decimal(dev_priv->cdclk.hw.cdclk);
1459 /*
1460 * Disable SSA Precharge when CD clock frequency < 500 MHz,
1461 * enable otherwise.
1462 */
1463 if (dev_priv->cdclk.hw.cdclk >= 500000)
1464 expected |= BXT_CDCLK_SSA_PRECHARGE_ENABLE;
1465
1466 if (cdctl == expected)
1467 /* All well; nothing to sanitize */
1468 return;
1469
1470 sanitize:
1471 DRM_DEBUG_KMS("Sanitizing cdclk programmed by pre-os\n");
1472
1473 /* force cdclk programming */
1474 dev_priv->cdclk.hw.cdclk = 0;
1475
1476 /* force full PLL disable + enable */
1477 dev_priv->cdclk.hw.vco = -1;
1478 }
1479
1480 /**
1481 * bxt_init_cdclk - Initialize CDCLK on BXT
1482 * @dev_priv: i915 device
1483 *
1484 * Initialize CDCLK for BXT and derivatives. This is generally
1485 * done only during the display core initialization sequence,
1486 * after which the DMC will take care of turning CDCLK off/on
1487 * as needed.
1488 */
1489 void bxt_init_cdclk(struct drm_i915_private *dev_priv)
1490 {
1491 struct intel_cdclk_state cdclk_state;
1492
1493 bxt_sanitize_cdclk(dev_priv);
1494
1495 if (dev_priv->cdclk.hw.cdclk != 0 &&
1496 dev_priv->cdclk.hw.vco != 0)
1497 return;
1498
1499 cdclk_state = dev_priv->cdclk.hw;
1500
1501 /*
1502 * FIXME:
1503 * - The initial CDCLK needs to be read from VBT.
1504 * Need to make this change after VBT has changes for BXT.
1505 */
1506 if (IS_GEMINILAKE(dev_priv)) {
1507 cdclk_state.cdclk = glk_calc_cdclk(0);
1508 cdclk_state.vco = glk_de_pll_vco(dev_priv, cdclk_state.cdclk);
1509 } else {
1510 cdclk_state.cdclk = bxt_calc_cdclk(0);
1511 cdclk_state.vco = bxt_de_pll_vco(dev_priv, cdclk_state.cdclk);
1512 }
1513 cdclk_state.voltage_level = bxt_calc_voltage_level(cdclk_state.cdclk);
1514
1515 bxt_set_cdclk(dev_priv, &cdclk_state);
1516 }
1517
1518 /**
1519 * bxt_uninit_cdclk - Uninitialize CDCLK on BXT
1520 * @dev_priv: i915 device
1521 *
1522 * Uninitialize CDCLK for BXT and derivatives. This is done only
1523 * during the display core uninitialization sequence.
1524 */
1525 void bxt_uninit_cdclk(struct drm_i915_private *dev_priv)
1526 {
1527 struct intel_cdclk_state cdclk_state = dev_priv->cdclk.hw;
1528
1529 cdclk_state.cdclk = cdclk_state.ref;
1530 cdclk_state.vco = 0;
1531 cdclk_state.voltage_level = bxt_calc_voltage_level(cdclk_state.cdclk);
1532
1533 bxt_set_cdclk(dev_priv, &cdclk_state);
1534 }
1535
1536 static int cnl_calc_cdclk(int min_cdclk)
1537 {
1538 if (min_cdclk > 336000)
1539 return 528000;
1540 else if (min_cdclk > 168000)
1541 return 336000;
1542 else
1543 return 168000;
1544 }
1545
1546 static u8 cnl_calc_voltage_level(int cdclk)
1547 {
1548 switch (cdclk) {
1549 default:
1550 case 168000:
1551 return 0;
1552 case 336000:
1553 return 1;
1554 case 528000:
1555 return 2;
1556 }
1557 }
1558
1559 static void cnl_cdclk_pll_update(struct drm_i915_private *dev_priv,
1560 struct intel_cdclk_state *cdclk_state)
1561 {
1562 u32 val;
1563
1564 if (I915_READ(SKL_DSSM) & CNL_DSSM_CDCLK_PLL_REFCLK_24MHz)
1565 cdclk_state->ref = 24000;
1566 else
1567 cdclk_state->ref = 19200;
1568
1569 cdclk_state->vco = 0;
1570
1571 val = I915_READ(BXT_DE_PLL_ENABLE);
1572 if ((val & BXT_DE_PLL_PLL_ENABLE) == 0)
1573 return;
1574
1575 if (WARN_ON((val & BXT_DE_PLL_LOCK) == 0))
1576 return;
1577
1578 cdclk_state->vco = (val & CNL_CDCLK_PLL_RATIO_MASK) * cdclk_state->ref;
1579 }
1580
1581 static void cnl_get_cdclk(struct drm_i915_private *dev_priv,
1582 struct intel_cdclk_state *cdclk_state)
1583 {
1584 u32 divider;
1585 int div;
1586
1587 cnl_cdclk_pll_update(dev_priv, cdclk_state);
1588
1589 cdclk_state->cdclk = cdclk_state->ref;
1590
1591 if (cdclk_state->vco == 0)
1592 goto out;
1593
1594 divider = I915_READ(CDCLK_CTL) & BXT_CDCLK_CD2X_DIV_SEL_MASK;
1595
1596 switch (divider) {
1597 case BXT_CDCLK_CD2X_DIV_SEL_1:
1598 div = 2;
1599 break;
1600 case BXT_CDCLK_CD2X_DIV_SEL_2:
1601 div = 4;
1602 break;
1603 default:
1604 MISSING_CASE(divider);
1605 return;
1606 }
1607
1608 cdclk_state->cdclk = DIV_ROUND_CLOSEST(cdclk_state->vco, div);
1609
1610 out:
1611 /*
1612 * Can't read this out :( Let's assume it's
1613 * at least what the CDCLK frequency requires.
1614 */
1615 cdclk_state->voltage_level =
1616 cnl_calc_voltage_level(cdclk_state->cdclk);
1617 }
1618
1619 static void cnl_cdclk_pll_disable(struct drm_i915_private *dev_priv)
1620 {
1621 u32 val;
1622
1623 val = I915_READ(BXT_DE_PLL_ENABLE);
1624 val &= ~BXT_DE_PLL_PLL_ENABLE;
1625 I915_WRITE(BXT_DE_PLL_ENABLE, val);
1626
1627 /* Timeout 200us */
1628 if (wait_for((I915_READ(BXT_DE_PLL_ENABLE) & BXT_DE_PLL_LOCK) == 0, 1))
1629 DRM_ERROR("timout waiting for CDCLK PLL unlock\n");
1630
1631 dev_priv->cdclk.hw.vco = 0;
1632 }
1633
1634 static void cnl_cdclk_pll_enable(struct drm_i915_private *dev_priv, int vco)
1635 {
1636 int ratio = DIV_ROUND_CLOSEST(vco, dev_priv->cdclk.hw.ref);
1637 u32 val;
1638
1639 val = CNL_CDCLK_PLL_RATIO(ratio);
1640 I915_WRITE(BXT_DE_PLL_ENABLE, val);
1641
1642 val |= BXT_DE_PLL_PLL_ENABLE;
1643 I915_WRITE(BXT_DE_PLL_ENABLE, val);
1644
1645 /* Timeout 200us */
1646 if (wait_for((I915_READ(BXT_DE_PLL_ENABLE) & BXT_DE_PLL_LOCK) != 0, 1))
1647 DRM_ERROR("timout waiting for CDCLK PLL lock\n");
1648
1649 dev_priv->cdclk.hw.vco = vco;
1650 }
1651
1652 static void cnl_set_cdclk(struct drm_i915_private *dev_priv,
1653 const struct intel_cdclk_state *cdclk_state)
1654 {
1655 int cdclk = cdclk_state->cdclk;
1656 int vco = cdclk_state->vco;
1657 u32 val, divider;
1658 int ret;
1659
1660 mutex_lock(&dev_priv->pcu_lock);
1661 ret = skl_pcode_request(dev_priv, SKL_PCODE_CDCLK_CONTROL,
1662 SKL_CDCLK_PREPARE_FOR_CHANGE,
1663 SKL_CDCLK_READY_FOR_CHANGE,
1664 SKL_CDCLK_READY_FOR_CHANGE, 3);
1665 mutex_unlock(&dev_priv->pcu_lock);
1666 if (ret) {
1667 DRM_ERROR("Failed to inform PCU about cdclk change (%d)\n",
1668 ret);
1669 return;
1670 }
1671
1672 /* cdclk = vco / 2 / div{1,2} */
1673 switch (DIV_ROUND_CLOSEST(vco, cdclk)) {
1674 default:
1675 WARN_ON(cdclk != dev_priv->cdclk.hw.ref);
1676 WARN_ON(vco != 0);
1677 /* fall through */
1678 case 2:
1679 divider = BXT_CDCLK_CD2X_DIV_SEL_1;
1680 break;
1681 case 4:
1682 divider = BXT_CDCLK_CD2X_DIV_SEL_2;
1683 break;
1684 }
1685
1686 if (dev_priv->cdclk.hw.vco != 0 &&
1687 dev_priv->cdclk.hw.vco != vco)
1688 cnl_cdclk_pll_disable(dev_priv);
1689
1690 if (dev_priv->cdclk.hw.vco != vco)
1691 cnl_cdclk_pll_enable(dev_priv, vco);
1692
1693 val = divider | skl_cdclk_decimal(cdclk);
1694 /*
1695 * FIXME if only the cd2x divider needs changing, it could be done
1696 * without shutting off the pipe (if only one pipe is active).
1697 */
1698 val |= BXT_CDCLK_CD2X_PIPE_NONE;
1699 I915_WRITE(CDCLK_CTL, val);
1700
1701 /* inform PCU of the change */
1702 mutex_lock(&dev_priv->pcu_lock);
1703 sandybridge_pcode_write(dev_priv, SKL_PCODE_CDCLK_CONTROL,
1704 cdclk_state->voltage_level);
1705 mutex_unlock(&dev_priv->pcu_lock);
1706
1707 intel_update_cdclk(dev_priv);
1708
1709 /*
1710 * Can't read out the voltage level :(
1711 * Let's just assume everything is as expected.
1712 */
1713 dev_priv->cdclk.hw.voltage_level = cdclk_state->voltage_level;
1714 }
1715
1716 static int cnl_cdclk_pll_vco(struct drm_i915_private *dev_priv, int cdclk)
1717 {
1718 int ratio;
1719
1720 if (cdclk == dev_priv->cdclk.hw.ref)
1721 return 0;
1722
1723 switch (cdclk) {
1724 default:
1725 MISSING_CASE(cdclk);
1726 /* fall through */
1727 case 168000:
1728 case 336000:
1729 ratio = dev_priv->cdclk.hw.ref == 19200 ? 35 : 28;
1730 break;
1731 case 528000:
1732 ratio = dev_priv->cdclk.hw.ref == 19200 ? 55 : 44;
1733 break;
1734 }
1735
1736 return dev_priv->cdclk.hw.ref * ratio;
1737 }
1738
1739 static void cnl_sanitize_cdclk(struct drm_i915_private *dev_priv)
1740 {
1741 u32 cdctl, expected;
1742
1743 intel_update_cdclk(dev_priv);
1744 intel_dump_cdclk_state(&dev_priv->cdclk.hw, "Current CDCLK");
1745
1746 if (dev_priv->cdclk.hw.vco == 0 ||
1747 dev_priv->cdclk.hw.cdclk == dev_priv->cdclk.hw.ref)
1748 goto sanitize;
1749
1750 /* DPLL okay; verify the cdclock
1751 *
1752 * Some BIOS versions leave an incorrect decimal frequency value and
1753 * set reserved MBZ bits in CDCLK_CTL at least during exiting from S4,
1754 * so sanitize this register.
1755 */
1756 cdctl = I915_READ(CDCLK_CTL);
1757 /*
1758 * Let's ignore the pipe field, since BIOS could have configured the
1759 * dividers both synching to an active pipe, or asynchronously
1760 * (PIPE_NONE).
1761 */
1762 cdctl &= ~BXT_CDCLK_CD2X_PIPE_NONE;
1763
1764 expected = (cdctl & BXT_CDCLK_CD2X_DIV_SEL_MASK) |
1765 skl_cdclk_decimal(dev_priv->cdclk.hw.cdclk);
1766
1767 if (cdctl == expected)
1768 /* All well; nothing to sanitize */
1769 return;
1770
1771 sanitize:
1772 DRM_DEBUG_KMS("Sanitizing cdclk programmed by pre-os\n");
1773
1774 /* force cdclk programming */
1775 dev_priv->cdclk.hw.cdclk = 0;
1776
1777 /* force full PLL disable + enable */
1778 dev_priv->cdclk.hw.vco = -1;
1779 }
1780
1781 /**
1782 * cnl_init_cdclk - Initialize CDCLK on CNL
1783 * @dev_priv: i915 device
1784 *
1785 * Initialize CDCLK for CNL. This is generally
1786 * done only during the display core initialization sequence,
1787 * after which the DMC will take care of turning CDCLK off/on
1788 * as needed.
1789 */
1790 void cnl_init_cdclk(struct drm_i915_private *dev_priv)
1791 {
1792 struct intel_cdclk_state cdclk_state;
1793
1794 cnl_sanitize_cdclk(dev_priv);
1795
1796 if (dev_priv->cdclk.hw.cdclk != 0 &&
1797 dev_priv->cdclk.hw.vco != 0)
1798 return;
1799
1800 cdclk_state = dev_priv->cdclk.hw;
1801
1802 cdclk_state.cdclk = cnl_calc_cdclk(0);
1803 cdclk_state.vco = cnl_cdclk_pll_vco(dev_priv, cdclk_state.cdclk);
1804 cdclk_state.voltage_level = cnl_calc_voltage_level(cdclk_state.cdclk);
1805
1806 cnl_set_cdclk(dev_priv, &cdclk_state);
1807 }
1808
1809 /**
1810 * cnl_uninit_cdclk - Uninitialize CDCLK on CNL
1811 * @dev_priv: i915 device
1812 *
1813 * Uninitialize CDCLK for CNL. This is done only
1814 * during the display core uninitialization sequence.
1815 */
1816 void cnl_uninit_cdclk(struct drm_i915_private *dev_priv)
1817 {
1818 struct intel_cdclk_state cdclk_state = dev_priv->cdclk.hw;
1819
1820 cdclk_state.cdclk = cdclk_state.ref;
1821 cdclk_state.vco = 0;
1822 cdclk_state.voltage_level = cnl_calc_voltage_level(cdclk_state.cdclk);
1823
1824 cnl_set_cdclk(dev_priv, &cdclk_state);
1825 }
1826
1827 /**
1828 * intel_cdclk_needs_modeset - Determine if two CDCLK states require a modeset on all pipes
1829 * @a: first CDCLK state
1830 * @b: second CDCLK state
1831 *
1832 * Returns:
1833 * True if the CDCLK states require pipes to be off during reprogramming, false if not.
1834 */
1835 bool intel_cdclk_needs_modeset(const struct intel_cdclk_state *a,
1836 const struct intel_cdclk_state *b)
1837 {
1838 return a->cdclk != b->cdclk ||
1839 a->vco != b->vco ||
1840 a->ref != b->ref;
1841 }
1842
1843 /**
1844 * intel_cdclk_changed - Determine if two CDCLK states are different
1845 * @a: first CDCLK state
1846 * @b: second CDCLK state
1847 *
1848 * Returns:
1849 * True if the CDCLK states don't match, false if they do.
1850 */
1851 bool intel_cdclk_changed(const struct intel_cdclk_state *a,
1852 const struct intel_cdclk_state *b)
1853 {
1854 return intel_cdclk_needs_modeset(a, b) ||
1855 a->voltage_level != b->voltage_level;
1856 }
1857
1858 void intel_dump_cdclk_state(const struct intel_cdclk_state *cdclk_state,
1859 const char *context)
1860 {
1861 DRM_DEBUG_DRIVER("%s %d kHz, VCO %d kHz, ref %d kHz, voltage level %d\n",
1862 context, cdclk_state->cdclk, cdclk_state->vco,
1863 cdclk_state->ref, cdclk_state->voltage_level);
1864 }
1865
1866 /**
1867 * intel_set_cdclk - Push the CDCLK state to the hardware
1868 * @dev_priv: i915 device
1869 * @cdclk_state: new CDCLK state
1870 *
1871 * Program the hardware based on the passed in CDCLK state,
1872 * if necessary.
1873 */
1874 void intel_set_cdclk(struct drm_i915_private *dev_priv,
1875 const struct intel_cdclk_state *cdclk_state)
1876 {
1877 if (!intel_cdclk_changed(&dev_priv->cdclk.hw, cdclk_state))
1878 return;
1879
1880 if (WARN_ON_ONCE(!dev_priv->display.set_cdclk))
1881 return;
1882
1883 intel_dump_cdclk_state(cdclk_state, "Changing CDCLK to");
1884
1885 dev_priv->display.set_cdclk(dev_priv, cdclk_state);
1886
1887 if (WARN(intel_cdclk_changed(&dev_priv->cdclk.hw, cdclk_state),
1888 "cdclk state doesn't match!\n")) {
1889 intel_dump_cdclk_state(&dev_priv->cdclk.hw, "[hw state]");
1890 intel_dump_cdclk_state(cdclk_state, "[sw state]");
1891 }
1892 }
1893
1894 static int intel_pixel_rate_to_cdclk(struct drm_i915_private *dev_priv,
1895 int pixel_rate)
1896 {
1897 if (INTEL_GEN(dev_priv) >= 10)
1898 return DIV_ROUND_UP(pixel_rate, 2);
1899 else if (IS_GEMINILAKE(dev_priv))
1900 /*
1901 * FIXME: Avoid using a pixel clock that is more than 99% of the cdclk
1902 * as a temporary workaround. Use a higher cdclk instead. (Note that
1903 * intel_compute_max_dotclk() limits the max pixel clock to 99% of max
1904 * cdclk.)
1905 */
1906 return DIV_ROUND_UP(pixel_rate * 100, 2 * 99);
1907 else if (IS_GEN9(dev_priv) ||
1908 IS_BROADWELL(dev_priv) || IS_HASWELL(dev_priv))
1909 return pixel_rate;
1910 else if (IS_CHERRYVIEW(dev_priv))
1911 return DIV_ROUND_UP(pixel_rate * 100, 95);
1912 else
1913 return DIV_ROUND_UP(pixel_rate * 100, 90);
1914 }
1915
1916 int intel_crtc_compute_min_cdclk(const struct intel_crtc_state *crtc_state)
1917 {
1918 struct drm_i915_private *dev_priv =
1919 to_i915(crtc_state->base.crtc->dev);
1920 int min_cdclk;
1921
1922 if (!crtc_state->base.enable)
1923 return 0;
1924
1925 min_cdclk = intel_pixel_rate_to_cdclk(dev_priv, crtc_state->pixel_rate);
1926
1927 /* pixel rate mustn't exceed 95% of cdclk with IPS on BDW */
1928 if (IS_BROADWELL(dev_priv) && hsw_crtc_state_ips_capable(crtc_state))
1929 min_cdclk = DIV_ROUND_UP(min_cdclk * 100, 95);
1930
1931 /* BSpec says "Do not use DisplayPort with CDCLK less than 432 MHz,
1932 * audio enabled, port width x4, and link rate HBR2 (5.4 GHz), or else
1933 * there may be audio corruption or screen corruption." This cdclk
1934 * restriction for GLK is 316.8 MHz.
1935 */
1936 if (intel_crtc_has_dp_encoder(crtc_state) &&
1937 crtc_state->has_audio &&
1938 crtc_state->port_clock >= 540000 &&
1939 crtc_state->lane_count == 4) {
1940 if (IS_CANNONLAKE(dev_priv) || IS_GEMINILAKE(dev_priv)) {
1941 /* Display WA #1145: glk,cnl */
1942 min_cdclk = max(316800, min_cdclk);
1943 } else if (IS_GEN9(dev_priv) || IS_BROADWELL(dev_priv)) {
1944 /* Display WA #1144: skl,bxt */
1945 min_cdclk = max(432000, min_cdclk);
1946 }
1947 }
1948
1949 /*
1950 * According to BSpec, "The CD clock frequency must be at least twice
1951 * the frequency of the Azalia BCLK." and BCLK is 96 MHz by default.
1952 *
1953 * FIXME: Check the actual, not default, BCLK being used.
1954 *
1955 * FIXME: This does not depend on ->has_audio because the higher CDCLK
1956 * is required for audio probe, also when there are no audio capable
1957 * displays connected at probe time. This leads to unnecessarily high
1958 * CDCLK when audio is not required.
1959 *
1960 * FIXME: This limit is only applied when there are displays connected
1961 * at probe time. If we probe without displays, we'll still end up using
1962 * the platform minimum CDCLK, failing audio probe.
1963 */
1964 if (INTEL_GEN(dev_priv) >= 9)
1965 min_cdclk = max(2 * 96000, min_cdclk);
1966
1967 /*
1968 * On Valleyview some DSI panels lose (v|h)sync when the clock is lower
1969 * than 320000KHz.
1970 */
1971 if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_DSI) &&
1972 IS_VALLEYVIEW(dev_priv))
1973 min_cdclk = max(320000, min_cdclk);
1974
1975 if (min_cdclk > dev_priv->max_cdclk_freq) {
1976 DRM_DEBUG_KMS("required cdclk (%d kHz) exceeds max (%d kHz)\n",
1977 min_cdclk, dev_priv->max_cdclk_freq);
1978 return -EINVAL;
1979 }
1980
1981 return min_cdclk;
1982 }
1983
1984 static int intel_compute_min_cdclk(struct drm_atomic_state *state)
1985 {
1986 struct intel_atomic_state *intel_state = to_intel_atomic_state(state);
1987 struct drm_i915_private *dev_priv = to_i915(state->dev);
1988 struct intel_crtc *crtc;
1989 struct intel_crtc_state *crtc_state;
1990 int min_cdclk, i;
1991 enum pipe pipe;
1992
1993 memcpy(intel_state->min_cdclk, dev_priv->min_cdclk,
1994 sizeof(intel_state->min_cdclk));
1995
1996 for_each_new_intel_crtc_in_state(intel_state, crtc, crtc_state, i) {
1997 min_cdclk = intel_crtc_compute_min_cdclk(crtc_state);
1998 if (min_cdclk < 0)
1999 return min_cdclk;
2000
2001 intel_state->min_cdclk[i] = min_cdclk;
2002 }
2003
2004 min_cdclk = 0;
2005 for_each_pipe(dev_priv, pipe)
2006 min_cdclk = max(intel_state->min_cdclk[pipe], min_cdclk);
2007
2008 return min_cdclk;
2009 }
2010
2011 /*
2012 * Note that this functions assumes that 0 is
2013 * the lowest voltage value, and higher values
2014 * correspond to increasingly higher voltages.
2015 *
2016 * Should that relationship no longer hold on
2017 * future platforms this code will need to be
2018 * adjusted.
2019 */
2020 static u8 cnl_compute_min_voltage_level(struct intel_atomic_state *state)
2021 {
2022 struct drm_i915_private *dev_priv = to_i915(state->base.dev);
2023 struct intel_crtc *crtc;
2024 struct intel_crtc_state *crtc_state;
2025 u8 min_voltage_level;
2026 int i;
2027 enum pipe pipe;
2028
2029 memcpy(state->min_voltage_level, dev_priv->min_voltage_level,
2030 sizeof(state->min_voltage_level));
2031
2032 for_each_new_intel_crtc_in_state(state, crtc, crtc_state, i) {
2033 if (crtc_state->base.enable)
2034 state->min_voltage_level[i] =
2035 crtc_state->min_voltage_level;
2036 else
2037 state->min_voltage_level[i] = 0;
2038 }
2039
2040 min_voltage_level = 0;
2041 for_each_pipe(dev_priv, pipe)
2042 min_voltage_level = max(state->min_voltage_level[pipe],
2043 min_voltage_level);
2044
2045 return min_voltage_level;
2046 }
2047
2048 static int vlv_modeset_calc_cdclk(struct drm_atomic_state *state)
2049 {
2050 struct drm_i915_private *dev_priv = to_i915(state->dev);
2051 struct intel_atomic_state *intel_state = to_intel_atomic_state(state);
2052 int min_cdclk, cdclk;
2053
2054 min_cdclk = intel_compute_min_cdclk(state);
2055 if (min_cdclk < 0)
2056 return min_cdclk;
2057
2058 cdclk = vlv_calc_cdclk(dev_priv, min_cdclk);
2059
2060 intel_state->cdclk.logical.cdclk = cdclk;
2061 intel_state->cdclk.logical.voltage_level =
2062 vlv_calc_voltage_level(dev_priv, cdclk);
2063
2064 if (!intel_state->active_crtcs) {
2065 cdclk = vlv_calc_cdclk(dev_priv, 0);
2066
2067 intel_state->cdclk.actual.cdclk = cdclk;
2068 intel_state->cdclk.actual.voltage_level =
2069 vlv_calc_voltage_level(dev_priv, cdclk);
2070 } else {
2071 intel_state->cdclk.actual =
2072 intel_state->cdclk.logical;
2073 }
2074
2075 return 0;
2076 }
2077
2078 static int bdw_modeset_calc_cdclk(struct drm_atomic_state *state)
2079 {
2080 struct intel_atomic_state *intel_state = to_intel_atomic_state(state);
2081 int min_cdclk, cdclk;
2082
2083 min_cdclk = intel_compute_min_cdclk(state);
2084 if (min_cdclk < 0)
2085 return min_cdclk;
2086
2087 /*
2088 * FIXME should also account for plane ratio
2089 * once 64bpp pixel formats are supported.
2090 */
2091 cdclk = bdw_calc_cdclk(min_cdclk);
2092
2093 intel_state->cdclk.logical.cdclk = cdclk;
2094 intel_state->cdclk.logical.voltage_level =
2095 bdw_calc_voltage_level(cdclk);
2096
2097 if (!intel_state->active_crtcs) {
2098 cdclk = bdw_calc_cdclk(0);
2099
2100 intel_state->cdclk.actual.cdclk = cdclk;
2101 intel_state->cdclk.actual.voltage_level =
2102 bdw_calc_voltage_level(cdclk);
2103 } else {
2104 intel_state->cdclk.actual =
2105 intel_state->cdclk.logical;
2106 }
2107
2108 return 0;
2109 }
2110
2111 static int skl_dpll0_vco(struct intel_atomic_state *intel_state)
2112 {
2113 struct drm_i915_private *dev_priv = to_i915(intel_state->base.dev);
2114 struct intel_crtc *crtc;
2115 struct intel_crtc_state *crtc_state;
2116 int vco, i;
2117
2118 vco = intel_state->cdclk.logical.vco;
2119 if (!vco)
2120 vco = dev_priv->skl_preferred_vco_freq;
2121
2122 for_each_new_intel_crtc_in_state(intel_state, crtc, crtc_state, i) {
2123 if (!crtc_state->base.enable)
2124 continue;
2125
2126 if (!intel_crtc_has_type(crtc_state, INTEL_OUTPUT_EDP))
2127 continue;
2128
2129 /*
2130 * DPLL0 VCO may need to be adjusted to get the correct
2131 * clock for eDP. This will affect cdclk as well.
2132 */
2133 switch (crtc_state->port_clock / 2) {
2134 case 108000:
2135 case 216000:
2136 vco = 8640000;
2137 break;
2138 default:
2139 vco = 8100000;
2140 break;
2141 }
2142 }
2143
2144 return vco;
2145 }
2146
2147 static int skl_modeset_calc_cdclk(struct drm_atomic_state *state)
2148 {
2149 struct intel_atomic_state *intel_state = to_intel_atomic_state(state);
2150 int min_cdclk, cdclk, vco;
2151
2152 min_cdclk = intel_compute_min_cdclk(state);
2153 if (min_cdclk < 0)
2154 return min_cdclk;
2155
2156 vco = skl_dpll0_vco(intel_state);
2157
2158 /*
2159 * FIXME should also account for plane ratio
2160 * once 64bpp pixel formats are supported.
2161 */
2162 cdclk = skl_calc_cdclk(min_cdclk, vco);
2163
2164 intel_state->cdclk.logical.vco = vco;
2165 intel_state->cdclk.logical.cdclk = cdclk;
2166 intel_state->cdclk.logical.voltage_level =
2167 skl_calc_voltage_level(cdclk);
2168
2169 if (!intel_state->active_crtcs) {
2170 cdclk = skl_calc_cdclk(0, vco);
2171
2172 intel_state->cdclk.actual.vco = vco;
2173 intel_state->cdclk.actual.cdclk = cdclk;
2174 intel_state->cdclk.actual.voltage_level =
2175 skl_calc_voltage_level(cdclk);
2176 } else {
2177 intel_state->cdclk.actual =
2178 intel_state->cdclk.logical;
2179 }
2180
2181 return 0;
2182 }
2183
2184 static int bxt_modeset_calc_cdclk(struct drm_atomic_state *state)
2185 {
2186 struct drm_i915_private *dev_priv = to_i915(state->dev);
2187 struct intel_atomic_state *intel_state = to_intel_atomic_state(state);
2188 int min_cdclk, cdclk, vco;
2189
2190 min_cdclk = intel_compute_min_cdclk(state);
2191 if (min_cdclk < 0)
2192 return min_cdclk;
2193
2194 if (IS_GEMINILAKE(dev_priv)) {
2195 cdclk = glk_calc_cdclk(min_cdclk);
2196 vco = glk_de_pll_vco(dev_priv, cdclk);
2197 } else {
2198 cdclk = bxt_calc_cdclk(min_cdclk);
2199 vco = bxt_de_pll_vco(dev_priv, cdclk);
2200 }
2201
2202 intel_state->cdclk.logical.vco = vco;
2203 intel_state->cdclk.logical.cdclk = cdclk;
2204 intel_state->cdclk.logical.voltage_level =
2205 bxt_calc_voltage_level(cdclk);
2206
2207 if (!intel_state->active_crtcs) {
2208 if (IS_GEMINILAKE(dev_priv)) {
2209 cdclk = glk_calc_cdclk(0);
2210 vco = glk_de_pll_vco(dev_priv, cdclk);
2211 } else {
2212 cdclk = bxt_calc_cdclk(0);
2213 vco = bxt_de_pll_vco(dev_priv, cdclk);
2214 }
2215
2216 intel_state->cdclk.actual.vco = vco;
2217 intel_state->cdclk.actual.cdclk = cdclk;
2218 intel_state->cdclk.actual.voltage_level =
2219 bxt_calc_voltage_level(cdclk);
2220 } else {
2221 intel_state->cdclk.actual =
2222 intel_state->cdclk.logical;
2223 }
2224
2225 return 0;
2226 }
2227
2228 static int cnl_modeset_calc_cdclk(struct drm_atomic_state *state)
2229 {
2230 struct drm_i915_private *dev_priv = to_i915(state->dev);
2231 struct intel_atomic_state *intel_state = to_intel_atomic_state(state);
2232 int min_cdclk, cdclk, vco;
2233
2234 min_cdclk = intel_compute_min_cdclk(state);
2235 if (min_cdclk < 0)
2236 return min_cdclk;
2237
2238 cdclk = cnl_calc_cdclk(min_cdclk);
2239 vco = cnl_cdclk_pll_vco(dev_priv, cdclk);
2240
2241 intel_state->cdclk.logical.vco = vco;
2242 intel_state->cdclk.logical.cdclk = cdclk;
2243 intel_state->cdclk.logical.voltage_level =
2244 max(cnl_calc_voltage_level(cdclk),
2245 cnl_compute_min_voltage_level(intel_state));
2246
2247 if (!intel_state->active_crtcs) {
2248 cdclk = cnl_calc_cdclk(0);
2249 vco = cnl_cdclk_pll_vco(dev_priv, cdclk);
2250
2251 intel_state->cdclk.actual.vco = vco;
2252 intel_state->cdclk.actual.cdclk = cdclk;
2253 intel_state->cdclk.actual.voltage_level =
2254 cnl_calc_voltage_level(cdclk);
2255 } else {
2256 intel_state->cdclk.actual =
2257 intel_state->cdclk.logical;
2258 }
2259
2260 return 0;
2261 }
2262
2263 static int intel_compute_max_dotclk(struct drm_i915_private *dev_priv)
2264 {
2265 int max_cdclk_freq = dev_priv->max_cdclk_freq;
2266
2267 if (INTEL_GEN(dev_priv) >= 10)
2268 return 2 * max_cdclk_freq;
2269 else if (IS_GEMINILAKE(dev_priv))
2270 /*
2271 * FIXME: Limiting to 99% as a temporary workaround. See
2272 * intel_min_cdclk() for details.
2273 */
2274 return 2 * max_cdclk_freq * 99 / 100;
2275 else if (IS_GEN9(dev_priv) ||
2276 IS_BROADWELL(dev_priv) || IS_HASWELL(dev_priv))
2277 return max_cdclk_freq;
2278 else if (IS_CHERRYVIEW(dev_priv))
2279 return max_cdclk_freq*95/100;
2280 else if (INTEL_INFO(dev_priv)->gen < 4)
2281 return 2*max_cdclk_freq*90/100;
2282 else
2283 return max_cdclk_freq*90/100;
2284 }
2285
2286 /**
2287 * intel_update_max_cdclk - Determine the maximum support CDCLK frequency
2288 * @dev_priv: i915 device
2289 *
2290 * Determine the maximum CDCLK frequency the platform supports, and also
2291 * derive the maximum dot clock frequency the maximum CDCLK frequency
2292 * allows.
2293 */
2294 void intel_update_max_cdclk(struct drm_i915_private *dev_priv)
2295 {
2296 if (IS_CANNONLAKE(dev_priv)) {
2297 dev_priv->max_cdclk_freq = 528000;
2298 } else if (IS_GEN9_BC(dev_priv)) {
2299 u32 limit = I915_READ(SKL_DFSM) & SKL_DFSM_CDCLK_LIMIT_MASK;
2300 int max_cdclk, vco;
2301
2302 vco = dev_priv->skl_preferred_vco_freq;
2303 WARN_ON(vco != 8100000 && vco != 8640000);
2304
2305 /*
2306 * Use the lower (vco 8640) cdclk values as a
2307 * first guess. skl_calc_cdclk() will correct it
2308 * if the preferred vco is 8100 instead.
2309 */
2310 if (limit == SKL_DFSM_CDCLK_LIMIT_675)
2311 max_cdclk = 617143;
2312 else if (limit == SKL_DFSM_CDCLK_LIMIT_540)
2313 max_cdclk = 540000;
2314 else if (limit == SKL_DFSM_CDCLK_LIMIT_450)
2315 max_cdclk = 432000;
2316 else
2317 max_cdclk = 308571;
2318
2319 dev_priv->max_cdclk_freq = skl_calc_cdclk(max_cdclk, vco);
2320 } else if (IS_GEMINILAKE(dev_priv)) {
2321 dev_priv->max_cdclk_freq = 316800;
2322 } else if (IS_BROXTON(dev_priv)) {
2323 dev_priv->max_cdclk_freq = 624000;
2324 } else if (IS_BROADWELL(dev_priv)) {
2325 /*
2326 * FIXME with extra cooling we can allow
2327 * 540 MHz for ULX and 675 Mhz for ULT.
2328 * How can we know if extra cooling is
2329 * available? PCI ID, VTB, something else?
2330 */
2331 if (I915_READ(FUSE_STRAP) & HSW_CDCLK_LIMIT)
2332 dev_priv->max_cdclk_freq = 450000;
2333 else if (IS_BDW_ULX(dev_priv))
2334 dev_priv->max_cdclk_freq = 450000;
2335 else if (IS_BDW_ULT(dev_priv))
2336 dev_priv->max_cdclk_freq = 540000;
2337 else
2338 dev_priv->max_cdclk_freq = 675000;
2339 } else if (IS_CHERRYVIEW(dev_priv)) {
2340 dev_priv->max_cdclk_freq = 320000;
2341 } else if (IS_VALLEYVIEW(dev_priv)) {
2342 dev_priv->max_cdclk_freq = 400000;
2343 } else {
2344 /* otherwise assume cdclk is fixed */
2345 dev_priv->max_cdclk_freq = dev_priv->cdclk.hw.cdclk;
2346 }
2347
2348 dev_priv->max_dotclk_freq = intel_compute_max_dotclk(dev_priv);
2349
2350 DRM_DEBUG_DRIVER("Max CD clock rate: %d kHz\n",
2351 dev_priv->max_cdclk_freq);
2352
2353 DRM_DEBUG_DRIVER("Max dotclock rate: %d kHz\n",
2354 dev_priv->max_dotclk_freq);
2355 }
2356
2357 /**
2358 * intel_update_cdclk - Determine the current CDCLK frequency
2359 * @dev_priv: i915 device
2360 *
2361 * Determine the current CDCLK frequency.
2362 */
2363 void intel_update_cdclk(struct drm_i915_private *dev_priv)
2364 {
2365 dev_priv->display.get_cdclk(dev_priv, &dev_priv->cdclk.hw);
2366
2367 /*
2368 * 9:0 CMBUS [sic] CDCLK frequency (cdfreq):
2369 * Programmng [sic] note: bit[9:2] should be programmed to the number
2370 * of cdclk that generates 4MHz reference clock freq which is used to
2371 * generate GMBus clock. This will vary with the cdclk freq.
2372 */
2373 if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv))
2374 I915_WRITE(GMBUSFREQ_VLV,
2375 DIV_ROUND_UP(dev_priv->cdclk.hw.cdclk, 1000));
2376 }
2377
2378 static int cnp_rawclk(struct drm_i915_private *dev_priv)
2379 {
2380 u32 rawclk;
2381 int divider, fraction;
2382
2383 if (I915_READ(SFUSE_STRAP) & SFUSE_STRAP_RAW_FREQUENCY) {
2384 /* 24 MHz */
2385 divider = 24000;
2386 fraction = 0;
2387 } else {
2388 /* 19.2 MHz */
2389 divider = 19000;
2390 fraction = 200;
2391 }
2392
2393 rawclk = CNP_RAWCLK_DIV((divider / 1000) - 1);
2394 if (fraction)
2395 rawclk |= CNP_RAWCLK_FRAC(DIV_ROUND_CLOSEST(1000,
2396 fraction) - 1);
2397
2398 I915_WRITE(PCH_RAWCLK_FREQ, rawclk);
2399 return divider + fraction;
2400 }
2401
2402 static int pch_rawclk(struct drm_i915_private *dev_priv)
2403 {
2404 return (I915_READ(PCH_RAWCLK_FREQ) & RAWCLK_FREQ_MASK) * 1000;
2405 }
2406
2407 static int vlv_hrawclk(struct drm_i915_private *dev_priv)
2408 {
2409 /* RAWCLK_FREQ_VLV register updated from power well code */
2410 return vlv_get_cck_clock_hpll(dev_priv, "hrawclk",
2411 CCK_DISPLAY_REF_CLOCK_CONTROL);
2412 }
2413
2414 static int g4x_hrawclk(struct drm_i915_private *dev_priv)
2415 {
2416 uint32_t clkcfg;
2417
2418 /* hrawclock is 1/4 the FSB frequency */
2419 clkcfg = I915_READ(CLKCFG);
2420 switch (clkcfg & CLKCFG_FSB_MASK) {
2421 case CLKCFG_FSB_400:
2422 return 100000;
2423 case CLKCFG_FSB_533:
2424 return 133333;
2425 case CLKCFG_FSB_667:
2426 return 166667;
2427 case CLKCFG_FSB_800:
2428 return 200000;
2429 case CLKCFG_FSB_1067:
2430 case CLKCFG_FSB_1067_ALT:
2431 return 266667;
2432 case CLKCFG_FSB_1333:
2433 case CLKCFG_FSB_1333_ALT:
2434 return 333333;
2435 default:
2436 return 133333;
2437 }
2438 }
2439
2440 /**
2441 * intel_update_rawclk - Determine the current RAWCLK frequency
2442 * @dev_priv: i915 device
2443 *
2444 * Determine the current RAWCLK frequency. RAWCLK is a fixed
2445 * frequency clock so this needs to done only once.
2446 */
2447 void intel_update_rawclk(struct drm_i915_private *dev_priv)
2448 {
2449
2450 if (HAS_PCH_CNP(dev_priv))
2451 dev_priv->rawclk_freq = cnp_rawclk(dev_priv);
2452 else if (HAS_PCH_SPLIT(dev_priv))
2453 dev_priv->rawclk_freq = pch_rawclk(dev_priv);
2454 else if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv))
2455 dev_priv->rawclk_freq = vlv_hrawclk(dev_priv);
2456 else if (IS_G4X(dev_priv) || IS_PINEVIEW(dev_priv))
2457 dev_priv->rawclk_freq = g4x_hrawclk(dev_priv);
2458 else
2459 /* no rawclk on other platforms, or no need to know it */
2460 return;
2461
2462 DRM_DEBUG_DRIVER("rawclk rate: %d kHz\n", dev_priv->rawclk_freq);
2463 }
2464
2465 /**
2466 * intel_init_cdclk_hooks - Initialize CDCLK related modesetting hooks
2467 * @dev_priv: i915 device
2468 */
2469 void intel_init_cdclk_hooks(struct drm_i915_private *dev_priv)
2470 {
2471 if (IS_CHERRYVIEW(dev_priv)) {
2472 dev_priv->display.set_cdclk = chv_set_cdclk;
2473 dev_priv->display.modeset_calc_cdclk =
2474 vlv_modeset_calc_cdclk;
2475 } else if (IS_VALLEYVIEW(dev_priv)) {
2476 dev_priv->display.set_cdclk = vlv_set_cdclk;
2477 dev_priv->display.modeset_calc_cdclk =
2478 vlv_modeset_calc_cdclk;
2479 } else if (IS_BROADWELL(dev_priv)) {
2480 dev_priv->display.set_cdclk = bdw_set_cdclk;
2481 dev_priv->display.modeset_calc_cdclk =
2482 bdw_modeset_calc_cdclk;
2483 } else if (IS_GEN9_LP(dev_priv)) {
2484 dev_priv->display.set_cdclk = bxt_set_cdclk;
2485 dev_priv->display.modeset_calc_cdclk =
2486 bxt_modeset_calc_cdclk;
2487 } else if (IS_GEN9_BC(dev_priv)) {
2488 dev_priv->display.set_cdclk = skl_set_cdclk;
2489 dev_priv->display.modeset_calc_cdclk =
2490 skl_modeset_calc_cdclk;
2491 } else if (IS_CANNONLAKE(dev_priv)) {
2492 dev_priv->display.set_cdclk = cnl_set_cdclk;
2493 dev_priv->display.modeset_calc_cdclk =
2494 cnl_modeset_calc_cdclk;
2495 }
2496
2497 if (IS_CANNONLAKE(dev_priv))
2498 dev_priv->display.get_cdclk = cnl_get_cdclk;
2499 else if (IS_GEN9_BC(dev_priv))
2500 dev_priv->display.get_cdclk = skl_get_cdclk;
2501 else if (IS_GEN9_LP(dev_priv))
2502 dev_priv->display.get_cdclk = bxt_get_cdclk;
2503 else if (IS_BROADWELL(dev_priv))
2504 dev_priv->display.get_cdclk = bdw_get_cdclk;
2505 else if (IS_HASWELL(dev_priv))
2506 dev_priv->display.get_cdclk = hsw_get_cdclk;
2507 else if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv))
2508 dev_priv->display.get_cdclk = vlv_get_cdclk;
2509 else if (IS_GEN6(dev_priv) || IS_IVYBRIDGE(dev_priv))
2510 dev_priv->display.get_cdclk = fixed_400mhz_get_cdclk;
2511 else if (IS_GEN5(dev_priv))
2512 dev_priv->display.get_cdclk = fixed_450mhz_get_cdclk;
2513 else if (IS_GM45(dev_priv))
2514 dev_priv->display.get_cdclk = gm45_get_cdclk;
2515 else if (IS_G45(dev_priv))
2516 dev_priv->display.get_cdclk = g33_get_cdclk;
2517 else if (IS_I965GM(dev_priv))
2518 dev_priv->display.get_cdclk = i965gm_get_cdclk;
2519 else if (IS_I965G(dev_priv))
2520 dev_priv->display.get_cdclk = fixed_400mhz_get_cdclk;
2521 else if (IS_PINEVIEW(dev_priv))
2522 dev_priv->display.get_cdclk = pnv_get_cdclk;
2523 else if (IS_G33(dev_priv))
2524 dev_priv->display.get_cdclk = g33_get_cdclk;
2525 else if (IS_I945GM(dev_priv))
2526 dev_priv->display.get_cdclk = i945gm_get_cdclk;
2527 else if (IS_I945G(dev_priv))
2528 dev_priv->display.get_cdclk = fixed_400mhz_get_cdclk;
2529 else if (IS_I915GM(dev_priv))
2530 dev_priv->display.get_cdclk = i915gm_get_cdclk;
2531 else if (IS_I915G(dev_priv))
2532 dev_priv->display.get_cdclk = fixed_333mhz_get_cdclk;
2533 else if (IS_I865G(dev_priv))
2534 dev_priv->display.get_cdclk = fixed_266mhz_get_cdclk;
2535 else if (IS_I85X(dev_priv))
2536 dev_priv->display.get_cdclk = i85x_get_cdclk;
2537 else if (IS_I845G(dev_priv))
2538 dev_priv->display.get_cdclk = fixed_200mhz_get_cdclk;
2539 else { /* 830 */
2540 WARN(!IS_I830(dev_priv),
2541 "Unknown platform. Assuming 133 MHz CDCLK\n");
2542 dev_priv->display.get_cdclk = fixed_133mhz_get_cdclk;
2543 }
2544 }
Linux with added FPC-III support