1 /* GemTek radio card driver for Linux (C) 1998 Jonas Munsin <jmunsin@iki.fi>
3 * GemTek hasn't released any specs on the card, so the protocol had to
4 * be reverse engineered with dosemu.
6 * Besides the protocol changes, this is mostly a copy of:
8 * RadioTrack II driver for Linux radio support (C) 1998 Ben Pfaff
10 * Based on RadioTrack I/RadioReveal (C) 1997 M. Kirkwood
11 * Converted to new API by Alan Cox <Alan.Cox@linux.org>
12 * Various bugfixes and enhancements by Russell Kroll <rkroll@exploits.org>
14 * TODO: Allow for more than one of these foolish entities :-)
16 * Converted to V4L2 API by Mauro Carvalho Chehab <mchehab@infradead.org>
19 #include <linux/module.h> /* Modules */
20 #include <linux/init.h> /* Initdata */
21 #include <linux/ioport.h> /* request_region */
22 #include <linux/delay.h> /* udelay */
23 #include <asm/io.h> /* outb, outb_p */
24 #include <asm/uaccess.h> /* copy to/from user */
25 #include <linux/videodev2.h> /* kernel radio structs */
26 #include <media/v4l2-common.h>
27 #include <linux/spinlock.h>
29 #include <linux/version.h> /* for KERNEL_VERSION MACRO */
30 #define RADIO_VERSION KERNEL_VERSION(0,0,2)
32 static struct v4l2_queryctrl radio_qctrl
[] = {
34 .id
= V4L2_CID_AUDIO_MUTE
,
39 .type
= V4L2_CTRL_TYPE_BOOLEAN
,
41 .id
= V4L2_CID_AUDIO_VOLUME
,
46 .default_value
= 0xff,
47 .type
= V4L2_CTRL_TYPE_INTEGER
,
51 #ifndef CONFIG_RADIO_GEMTEK_PORT
52 #define CONFIG_RADIO_GEMTEK_PORT -1
55 static int io
= CONFIG_RADIO_GEMTEK_PORT
;
56 static int radio_nr
= -1;
57 static spinlock_t lock
;
62 unsigned long curfreq
;
69 /* the correct way to mute the gemtek may be to write the last written
70 * frequency || 0x10, but just writing 0x10 once seems to do it as well
72 static void gemtek_mute(struct gemtek_device
*dev
)
82 static void gemtek_unmute(struct gemtek_device
*dev
)
92 static void zero(void)
100 static void one(void)
108 static int gemtek_setfreq(struct gemtek_device
*dev
, unsigned long freq
)
112 /* freq = 78.25*((float)freq/16000.0 + 10.52); */
127 /* 28 frequency bits (lsb first) */
128 for (i
= 0; i
< 14; i
++)
133 /* 36 unknown bits */
134 for (i
= 0; i
< 11; i
++)
137 for (i
= 0; i
< 4; i
++)
153 static int gemtek_getsigstr(struct gemtek_device
*dev
)
159 if (inb(io
) & 8) /* bit set = no signal present */
161 return 1; /* signal present */
164 static int gemtek_do_ioctl(struct inode
*inode
, struct file
*file
,
165 unsigned int cmd
, void *arg
)
167 struct video_device
*dev
= video_devdata(file
);
168 struct gemtek_device
*rt
=dev
->priv
;
172 case VIDIOC_QUERYCAP
:
174 struct v4l2_capability
*v
= arg
;
175 memset(v
,0,sizeof(*v
));
176 strlcpy(v
->driver
, "radio-gemtek", sizeof (v
->driver
));
177 strlcpy(v
->card
, "GemTek", sizeof (v
->card
));
178 sprintf(v
->bus_info
,"ISA");
179 v
->version
= RADIO_VERSION
;
180 v
->capabilities
= V4L2_CAP_TUNER
;
186 struct v4l2_tuner
*v
= arg
;
191 memset(v
,0,sizeof(*v
));
192 strcpy(v
->name
, "FM");
193 v
->type
= V4L2_TUNER_RADIO
;
195 v
->rangelow
=(87*16000);
196 v
->rangehigh
=(108*16000);
197 v
->rxsubchans
=V4L2_TUNER_SUB_MONO
;
198 v
->capability
=V4L2_TUNER_CAP_LOW
;
199 v
->audmode
= V4L2_TUNER_MODE_MONO
;
200 v
->signal
=0xFFFF*gemtek_getsigstr(rt
);
206 struct v4l2_tuner
*v
= arg
;
213 case VIDIOC_S_FREQUENCY
:
215 struct v4l2_frequency
*f
= arg
;
217 rt
->curfreq
= f
->frequency
;
218 /* needs to be called twice in order for getsigstr to work */
219 gemtek_setfreq(rt
, rt
->curfreq
);
220 gemtek_setfreq(rt
, rt
->curfreq
);
223 case VIDIOC_G_FREQUENCY
:
225 struct v4l2_frequency
*f
= arg
;
227 f
->type
= V4L2_TUNER_RADIO
;
228 f
->frequency
= rt
->curfreq
;
232 case VIDIOC_QUERYCTRL
:
234 struct v4l2_queryctrl
*qc
= arg
;
237 for (i
= 0; i
< ARRAY_SIZE(radio_qctrl
); i
++) {
238 if (qc
->id
&& qc
->id
== radio_qctrl
[i
].id
) {
239 memcpy(qc
, &(radio_qctrl
[i
]),
248 struct v4l2_control
*ctrl
= arg
;
251 case V4L2_CID_AUDIO_MUTE
:
252 ctrl
->value
=rt
->muted
;
254 case V4L2_CID_AUDIO_VOLUME
:
265 struct v4l2_control
*ctrl
= arg
;
268 case V4L2_CID_AUDIO_MUTE
:
275 case V4L2_CID_AUDIO_VOLUME
:
286 return v4l_compat_translate_ioctl(inode
,file
,cmd
,arg
,
291 static int gemtek_ioctl(struct inode
*inode
, struct file
*file
,
292 unsigned int cmd
, unsigned long arg
)
294 return video_usercopy(inode
, file
, cmd
, arg
, gemtek_do_ioctl
);
297 static struct gemtek_device gemtek_unit
;
299 static const struct file_operations gemtek_fops
= {
300 .owner
= THIS_MODULE
,
301 .open
= video_exclusive_open
,
302 .release
= video_exclusive_release
,
303 .ioctl
= gemtek_ioctl
,
304 .compat_ioctl
= v4l_compat_ioctl32
,
308 static struct video_device gemtek_radio
=
310 .owner
= THIS_MODULE
,
311 .name
= "GemTek radio",
312 .type
= VID_TYPE_TUNER
,
314 .fops
= &gemtek_fops
,
317 static int __init
gemtek_init(void)
321 printk(KERN_ERR
"You must set an I/O address with io=0x20c, io=0x30c, io=0x24c or io=0x34c (io=0x020c or io=0x248 for the combined sound/radiocard)\n");
325 if (!request_region(io
, 4, "gemtek"))
327 printk(KERN_ERR
"gemtek: port 0x%x already in use\n", io
);
331 gemtek_radio
.priv
=&gemtek_unit
;
333 if(video_register_device(&gemtek_radio
, VFL_TYPE_RADIO
, radio_nr
)==-1)
335 release_region(io
, 4);
338 printk(KERN_INFO
"GemTek Radio Card driver.\n");
340 spin_lock_init(&lock
);
342 /* this is _maybe_ unnecessary */
345 /* mute card - prevents noisy bootups */
346 gemtek_unit
.muted
= 0;
347 gemtek_mute(&gemtek_unit
);
352 MODULE_AUTHOR("Jonas Munsin");
353 MODULE_DESCRIPTION("A driver for the GemTek Radio Card");
354 MODULE_LICENSE("GPL");
356 module_param(io
, int, 0);
357 MODULE_PARM_DESC(io
, "I/O address of the GemTek card (0x20c, 0x30c, 0x24c or 0x34c (0x20c or 0x248 have been reported to work for the combined sound/radiocard)).");
358 module_param(radio_nr
, int, 0);
360 static void __exit
gemtek_cleanup(void)
362 video_unregister_device(&gemtek_radio
);
363 release_region(io
,4);
366 module_init(gemtek_init
);
367 module_exit(gemtek_cleanup
);
371 compile-command: "gcc -c -DMODVERSIONS -D__KERNEL__ -DMODULE -O6 -Wall -Wstrict-prototypes -I /home/blp/tmp/linux-2.1.111-rtrack/include radio-rtrack2.c"