drivers/media/video/ovcamchip/ov6x20.c

   1 /* OmniVision OV6620/OV6120 Camera Chip Support Code
   2  *
   3  * Copyright (c) 1999-2004 Mark McClelland <mark@alpha.dyndns.org>
   4  * http://alpha.dyndns.org/ov511/
   5  *
   6  * This program is free software; you can redistribute it and/or modify it
   7  * under the terms of the GNU General Public License as published by the
   8  * Free Software Foundation; either version 2 of the License, or (at your
   9  * option) any later version. NO WARRANTY OF ANY KIND is expressed or implied.
  10  */
  11
  12 #define DEBUG
  13
  14 #include <linux/slab.h>
  15 #include "ovcamchip_priv.h"
  16
  17 /* Registers */
  18 #define REG_GAIN                0x00    /* gain [5:0] */
  19 #define REG_BLUE                0x01    /* blue gain */
  20 #define REG_RED                 0x02    /* red gain */
  21 #define REG_SAT                 0x03    /* saturation */
  22 #define REG_CNT                 0x05    /* Y contrast */
  23 #define REG_BRT                 0x06    /* Y brightness */
  24 #define REG_WB_BLUE             0x0C    /* WB blue ratio [5:0] */
  25 #define REG_WB_RED              0x0D    /* WB red ratio [5:0] */
  26 #define REG_EXP                 0x10    /* exposure */
  27
  28 /* Window parameters */
  29 #define HWSBASE 0x38
  30 #define HWEBASE 0x3A
  31 #define VWSBASE 0x05
  32 #define VWEBASE 0x06
  33
  34 struct ov6x20 {
  35         int auto_brt;
  36         int auto_exp;
  37         int backlight;
  38         int bandfilt;
  39         int mirror;
  40 };
  41
  42 /* Initial values for use with OV511/OV511+ cameras */
  43 static struct ovcamchip_regvals regvals_init_6x20_511[] = {
  44         { 0x12, 0x80 }, /* reset */
  45         { 0x11, 0x01 },
  46         { 0x03, 0x60 },
  47         { 0x05, 0x7f }, /* For when autoadjust is off */
  48         { 0x07, 0xa8 },
  49         { 0x0c, 0x24 },
  50         { 0x0d, 0x24 },
  51         { 0x0f, 0x15 }, /* COMS */
  52         { 0x10, 0x75 }, /* AEC Exposure time */
  53         { 0x12, 0x24 }, /* Enable AGC and AWB */
  54         { 0x14, 0x04 },
  55         { 0x16, 0x03 },
  56         { 0x26, 0xb2 }, /* BLC enable */
  57         /* 0x28: 0x05 Selects RGB format if RGB on */
  58         { 0x28, 0x05 },
  59         { 0x2a, 0x04 }, /* Disable framerate adjust */
  60         { 0x2d, 0x99 },
  61         { 0x33, 0xa0 }, /* Color Processing Parameter */
  62         { 0x34, 0xd2 }, /* Max A/D range */
  63         { 0x38, 0x8b },
  64         { 0x39, 0x40 },
  65
  66         { 0x3c, 0x39 }, /* Enable AEC mode changing */
  67         { 0x3c, 0x3c }, /* Change AEC mode */
  68         { 0x3c, 0x24 }, /* Disable AEC mode changing */
  69
  70         { 0x3d, 0x80 },
  71         /* These next two registers (0x4a, 0x4b) are undocumented. They
  72          * control the color balance */
  73         { 0x4a, 0x80 },
  74         { 0x4b, 0x80 },
  75         { 0x4d, 0xd2 }, /* This reduces noise a bit */
  76         { 0x4e, 0xc1 },
  77         { 0x4f, 0x04 },
  78         { 0xff, 0xff }, /* END MARKER */
  79 };
  80
  81 /* Initial values for use with OV518 cameras */
  82 static struct ovcamchip_regvals regvals_init_6x20_518[] = {
  83         { 0x12, 0x80 }, /* Do a reset */
  84         { 0x03, 0xc0 }, /* Saturation */
  85         { 0x05, 0x8a }, /* Contrast */
  86         { 0x0c, 0x24 }, /* AWB blue */
  87         { 0x0d, 0x24 }, /* AWB red */
  88         { 0x0e, 0x8d }, /* Additional 2x gain */
  89         { 0x0f, 0x25 }, /* Black expanding level = 1.3V */
  90         { 0x11, 0x01 }, /* Clock div. */
  91         { 0x12, 0x24 }, /* Enable AGC and AWB */
  92         { 0x13, 0x01 }, /* (default) */
  93         { 0x14, 0x80 }, /* Set reserved bit 7 */
  94         { 0x15, 0x01 }, /* (default) */
  95         { 0x16, 0x03 }, /* (default) */
  96         { 0x17, 0x38 }, /* (default) */
  97         { 0x18, 0xea }, /* (default) */
  98         { 0x19, 0x04 },
  99         { 0x1a, 0x93 },
 100         { 0x1b, 0x00 }, /* (default) */
 101         { 0x1e, 0xc4 }, /* (default) */
 102         { 0x1f, 0x04 }, /* (default) */
 103         { 0x20, 0x20 }, /* Enable 1st stage aperture correction */
 104         { 0x21, 0x10 }, /* Y offset */
 105         { 0x22, 0x88 }, /* U offset */
 106         { 0x23, 0xc0 }, /* Set XTAL power level */
 107         { 0x24, 0x53 }, /* AEC bright ratio */
 108         { 0x25, 0x7a }, /* AEC black ratio */
 109         { 0x26, 0xb2 }, /* BLC enable */
 110         { 0x27, 0xa2 }, /* Full output range */
 111         { 0x28, 0x01 }, /* (default) */
 112         { 0x29, 0x00 }, /* (default) */
 113         { 0x2a, 0x84 }, /* (default) */
 114         { 0x2b, 0xa8 }, /* Set custom frame rate */
 115         { 0x2c, 0xa0 }, /* (reserved) */
 116         { 0x2d, 0x95 }, /* Enable banding filter */
 117         { 0x2e, 0x88 }, /* V offset */
 118         { 0x33, 0x22 }, /* Luminance gamma on */
 119         { 0x34, 0xc7 }, /* A/D bias */
 120         { 0x36, 0x12 }, /* (reserved) */
 121         { 0x37, 0x63 }, /* (reserved) */
 122         { 0x38, 0x8b }, /* Quick AEC/AEB */
 123         { 0x39, 0x00 }, /* (default) */
 124         { 0x3a, 0x0f }, /* (default) */
 125         { 0x3b, 0x3c }, /* (default) */
 126         { 0x3c, 0x5c }, /* AEC controls */
 127         { 0x3d, 0x80 }, /* Drop 1 (bad) frame when AEC change */
 128         { 0x3e, 0x80 }, /* (default) */
 129         { 0x3f, 0x02 }, /* (default) */
 130         { 0x40, 0x10 }, /* (reserved) */
 131         { 0x41, 0x10 }, /* (reserved) */
 132         { 0x42, 0x00 }, /* (reserved) */
 133         { 0x43, 0x7f }, /* (reserved) */
 134         { 0x44, 0x80 }, /* (reserved) */
 135         { 0x45, 0x1c }, /* (reserved) */
 136         { 0x46, 0x1c }, /* (reserved) */
 137         { 0x47, 0x80 }, /* (reserved) */
 138         { 0x48, 0x5f }, /* (reserved) */
 139         { 0x49, 0x00 }, /* (reserved) */
 140         { 0x4a, 0x00 }, /* Color balance (undocumented) */
 141         { 0x4b, 0x80 }, /* Color balance (undocumented) */
 142         { 0x4c, 0x58 }, /* (reserved) */
 143         { 0x4d, 0xd2 }, /* U *= .938, V *= .838 */
 144         { 0x4e, 0xa0 }, /* (default) */
 145         { 0x4f, 0x04 }, /* UV 3-point average */
 146         { 0x50, 0xff }, /* (reserved) */
 147         { 0x51, 0x58 }, /* (reserved) */
 148         { 0x52, 0xc0 }, /* (reserved) */
 149         { 0x53, 0x42 }, /* (reserved) */
 150         { 0x27, 0xa6 }, /* Enable manual offset adj. (reg 21 & 22) */
 151         { 0x12, 0x20 },
 152         { 0x12, 0x24 },
 153
 154         { 0xff, 0xff }, /* END MARKER */
 155 };
 156
 157 /* This initializes the OV6x20 camera chip and relevant variables. */
 158 static int ov6x20_init(struct i2c_client *c)
 159 {
 160         struct ovcamchip *ov = i2c_get_clientdata(c);
 161         struct ov6x20 *s;
 162         int rc;
 163
 164         DDEBUG(4, &c->dev, "entered");
 165
 166         switch (c->adapter->id) {
 167         case I2C_HW_SMBUS_OV511:
 168                 rc = ov_write_regvals(c, regvals_init_6x20_511);
 169                 break;
 170         case I2C_HW_SMBUS_OV518:
 171                 rc = ov_write_regvals(c, regvals_init_6x20_518);
 172                 break;
 173         default:
 174                 dev_err(&c->dev, "ov6x20: Unsupported adapter\n");
 175                 rc = -ENODEV;
 176         }
 177
 178         if (rc < 0)
 179                 return rc;
 180
 181         ov->spriv = s = kzalloc(sizeof *s, GFP_KERNEL);
 182         if (!s)
 183                 return -ENOMEM;
 184
 185         s->auto_brt = 1;
 186         s->auto_exp = 1;
 187
 188         return rc;
 189 }
 190
 191 static int ov6x20_free(struct i2c_client *c)
 192 {
 193         struct ovcamchip *ov = i2c_get_clientdata(c);
 194
 195         kfree(ov->spriv);
 196         return 0;
 197 }
 198
 199 static int ov6x20_set_control(struct i2c_client *c,
 200                               struct ovcamchip_control *ctl)
 201 {
 202         struct ovcamchip *ov = i2c_get_clientdata(c);
 203         struct ov6x20 *s = ov->spriv;
 204         int rc;
 205         int v = ctl->value;
 206
 207         switch (ctl->id) {
 208         case OVCAMCHIP_CID_CONT:
 209                 rc = ov_write(c, REG_CNT, v >> 8);
 210                 break;
 211         case OVCAMCHIP_CID_BRIGHT:
 212                 rc = ov_write(c, REG_BRT, v >> 8);
 213                 break;
 214         case OVCAMCHIP_CID_SAT:
 215                 rc = ov_write(c, REG_SAT, v >> 8);
 216                 break;
 217         case OVCAMCHIP_CID_HUE:
 218                 rc = ov_write(c, REG_RED, 0xFF - (v >> 8));
 219                 if (rc < 0)
 220                         goto out;
 221
 222                 rc = ov_write(c, REG_BLUE, v >> 8);
 223                 break;
 224         case OVCAMCHIP_CID_EXP:
 225                 rc = ov_write(c, REG_EXP, v);
 226                 break;
 227         case OVCAMCHIP_CID_FREQ:
 228         {
 229                 int sixty = (v == 60);
 230
 231                 rc = ov_write(c, 0x2b, sixty?0xa8:0x28);
 232                 if (rc < 0)
 233                         goto out;
 234
 235                 rc = ov_write(c, 0x2a, sixty?0x84:0xa4);
 236                 break;
 237         }
 238         case OVCAMCHIP_CID_BANDFILT:
 239                 rc = ov_write_mask(c, 0x2d, v?0x04:0x00, 0x04);
 240                 s->bandfilt = v;
 241                 break;
 242         case OVCAMCHIP_CID_AUTOBRIGHT:
 243                 rc = ov_write_mask(c, 0x2d, v?0x10:0x00, 0x10);
 244                 s->auto_brt = v;
 245                 break;
 246         case OVCAMCHIP_CID_AUTOEXP:
 247                 rc = ov_write_mask(c, 0x13, v?0x01:0x00, 0x01);
 248                 s->auto_exp = v;
 249                 break;
 250         case OVCAMCHIP_CID_BACKLIGHT:
 251         {
 252                 rc = ov_write_mask(c, 0x4e, v?0xe0:0xc0, 0xe0);
 253                 if (rc < 0)
 254                         goto out;
 255
 256                 rc = ov_write_mask(c, 0x29, v?0x08:0x00, 0x08);
 257                 if (rc < 0)
 258                         goto out;
 259
 260                 rc = ov_write_mask(c, 0x0e, v?0x80:0x00, 0x80);
 261                 s->backlight = v;
 262                 break;
 263         }
 264         case OVCAMCHIP_CID_MIRROR:
 265                 rc = ov_write_mask(c, 0x12, v?0x40:0x00, 0x40);
 266                 s->mirror = v;
 267                 break;
 268         default:
 269                 DDEBUG(2, &c->dev, "control not supported: %d", ctl->id);
 270                 return -EPERM;
 271         }
 272
 273 out:
 274         DDEBUG(3, &c->dev, "id=%d, arg=%d, rc=%d", ctl->id, v, rc);
 275         return rc;
 276 }
 277
 278 static int ov6x20_get_control(struct i2c_client *c,
 279                               struct ovcamchip_control *ctl)
 280 {
 281         struct ovcamchip *ov = i2c_get_clientdata(c);
 282         struct ov6x20 *s = ov->spriv;
 283         int rc = 0;
 284         unsigned char val = 0;
 285
 286         switch (ctl->id) {
 287         case OVCAMCHIP_CID_CONT:
 288                 rc = ov_read(c, REG_CNT, &val);
 289                 ctl->value = val << 8;
 290                 break;
 291         case OVCAMCHIP_CID_BRIGHT:
 292                 rc = ov_read(c, REG_BRT, &val);
 293                 ctl->value = val << 8;
 294                 break;
 295         case OVCAMCHIP_CID_SAT:
 296                 rc = ov_read(c, REG_SAT, &val);
 297                 ctl->value = val << 8;
 298                 break;
 299         case OVCAMCHIP_CID_HUE:
 300                 rc = ov_read(c, REG_BLUE, &val);
 301                 ctl->value = val << 8;
 302                 break;
 303         case OVCAMCHIP_CID_EXP:
 304                 rc = ov_read(c, REG_EXP, &val);
 305                 ctl->value = val;
 306                 break;
 307         case OVCAMCHIP_CID_BANDFILT:
 308                 ctl->value = s->bandfilt;
 309                 break;
 310         case OVCAMCHIP_CID_AUTOBRIGHT:
 311                 ctl->value = s->auto_brt;
 312                 break;
 313         case OVCAMCHIP_CID_AUTOEXP:
 314                 ctl->value = s->auto_exp;
 315                 break;
 316         case OVCAMCHIP_CID_BACKLIGHT:
 317                 ctl->value = s->backlight;
 318                 break;
 319         case OVCAMCHIP_CID_MIRROR:
 320                 ctl->value = s->mirror;
 321                 break;
 322         default:
 323                 DDEBUG(2, &c->dev, "control not supported: %d", ctl->id);
 324                 return -EPERM;
 325         }
 326
 327         DDEBUG(3, &c->dev, "id=%d, arg=%d, rc=%d", ctl->id, ctl->value, rc);
 328         return rc;
 329 }
 330
 331 static int ov6x20_mode_init(struct i2c_client *c, struct ovcamchip_window *win)
 332 {
 333         /******** QCIF-specific regs ********/
 334
 335         ov_write(c, 0x14, win->quarter?0x24:0x04);
 336
 337         /******** Palette-specific regs ********/
 338
 339         /* OV518 needs 8 bit multiplexed in color mode, and 16 bit in B&W */
 340         if (c->adapter->id == I2C_HW_SMBUS_OV518) {
 341                 if (win->format == VIDEO_PALETTE_GREY)
 342                         ov_write_mask(c, 0x13, 0x00, 0x20);
 343                 else
 344                         ov_write_mask(c, 0x13, 0x20, 0x20);
 345         } else {
 346                 if (win->format == VIDEO_PALETTE_GREY)
 347                         ov_write_mask(c, 0x13, 0x20, 0x20);
 348                 else
 349                         ov_write_mask(c, 0x13, 0x00, 0x20);
 350         }
 351
 352         /******** Clock programming ********/
 353
 354         /* The OV6620 needs special handling. This prevents the
 355          * severe banding that normally occurs */
 356
 357         /* Clock down */
 358         ov_write(c, 0x2a, 0x04);
 359
 360         ov_write(c, 0x11, win->clockdiv);
 361
 362         ov_write(c, 0x2a, 0x84);
 363         /* This next setting is critical. It seems to improve
 364          * the gain or the contrast. The "reserved" bits seem
 365          * to have some effect in this case. */
 366         ov_write(c, 0x2d, 0x85); /* FIXME: This messes up banding filter */
 367
 368         return 0;
 369 }
 370
 371 static int ov6x20_set_window(struct i2c_client *c, struct ovcamchip_window *win)
 372 {
 373         int ret, hwscale, vwscale;
 374
 375         ret = ov6x20_mode_init(c, win);
 376         if (ret < 0)
 377                 return ret;
 378
 379         if (win->quarter) {
 380                 hwscale = 0;
 381                 vwscale = 0;
 382         } else {
 383                 hwscale = 1;
 384                 vwscale = 1;    /* The datasheet says 0; it's wrong */
 385         }
 386
 387         ov_write(c, 0x17, HWSBASE + (win->x >> hwscale));
 388         ov_write(c, 0x18, HWEBASE + ((win->x + win->width) >> hwscale));
 389         ov_write(c, 0x19, VWSBASE + (win->y >> vwscale));
 390         ov_write(c, 0x1a, VWEBASE + ((win->y + win->height) >> vwscale));
 391
 392         return 0;
 393 }
 394
 395 static int ov6x20_command(struct i2c_client *c, unsigned int cmd, void *arg)
 396 {
 397         switch (cmd) {
 398         case OVCAMCHIP_CMD_S_CTRL:
 399                 return ov6x20_set_control(c, arg);
 400         case OVCAMCHIP_CMD_G_CTRL:
 401                 return ov6x20_get_control(c, arg);
 402         case OVCAMCHIP_CMD_S_MODE:
 403                 return ov6x20_set_window(c, arg);
 404         default:
 405                 DDEBUG(2, &c->dev, "command not supported: %d", cmd);
 406                 return -ENOIOCTLCMD;
 407         }
 408 }
 409
 410 struct ovcamchip_ops ov6x20_ops = {
 411         .init    =      ov6x20_init,
 412         .free    =      ov6x20_free,
 413         .command =      ov6x20_command,
 414 };