1 // SPDX-License-Identifier: GPL-2.0
3 * PCIe driver for Marvell Armada 370 and Armada XP SoCs
5 * Author: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
8 #include <linux/kernel.h>
10 #include <linux/clk.h>
11 #include <linux/delay.h>
12 #include <linux/gpio.h>
13 #include <linux/init.h>
14 #include <linux/mbus.h>
15 #include <linux/msi.h>
16 #include <linux/slab.h>
17 #include <linux/platform_device.h>
18 #include <linux/of_address.h>
19 #include <linux/of_irq.h>
20 #include <linux/of_gpio.h>
21 #include <linux/of_pci.h>
22 #include <linux/of_platform.h>
25 #include "../pci-bridge-emul.h"
28 * PCIe unit register offsets.
30 #define PCIE_DEV_ID_OFF 0x0000
31 #define PCIE_CMD_OFF 0x0004
32 #define PCIE_DEV_REV_OFF 0x0008
33 #define PCIE_BAR_LO_OFF(n) (0x0010 + ((n) << 3))
34 #define PCIE_BAR_HI_OFF(n) (0x0014 + ((n) << 3))
35 #define PCIE_CAP_PCIEXP 0x0060
36 #define PCIE_HEADER_LOG_4_OFF 0x0128
37 #define PCIE_BAR_CTRL_OFF(n) (0x1804 + (((n) - 1) * 4))
38 #define PCIE_WIN04_CTRL_OFF(n) (0x1820 + ((n) << 4))
39 #define PCIE_WIN04_BASE_OFF(n) (0x1824 + ((n) << 4))
40 #define PCIE_WIN04_REMAP_OFF(n) (0x182c + ((n) << 4))
41 #define PCIE_WIN5_CTRL_OFF 0x1880
42 #define PCIE_WIN5_BASE_OFF 0x1884
43 #define PCIE_WIN5_REMAP_OFF 0x188c
44 #define PCIE_CONF_ADDR_OFF 0x18f8
45 #define PCIE_CONF_ADDR_EN 0x80000000
46 #define PCIE_CONF_REG(r) ((((r) & 0xf00) << 16) | ((r) & 0xfc))
47 #define PCIE_CONF_BUS(b) (((b) & 0xff) << 16)
48 #define PCIE_CONF_DEV(d) (((d) & 0x1f) << 11)
49 #define PCIE_CONF_FUNC(f) (((f) & 0x7) << 8)
50 #define PCIE_CONF_ADDR(bus, devfn, where) \
51 (PCIE_CONF_BUS(bus) | PCIE_CONF_DEV(PCI_SLOT(devfn)) | \
52 PCIE_CONF_FUNC(PCI_FUNC(devfn)) | PCIE_CONF_REG(where) | \
54 #define PCIE_CONF_DATA_OFF 0x18fc
55 #define PCIE_MASK_OFF 0x1910
56 #define PCIE_MASK_ENABLE_INTS 0x0f000000
57 #define PCIE_CTRL_OFF 0x1a00
58 #define PCIE_CTRL_X1_MODE 0x0001
59 #define PCIE_STAT_OFF 0x1a04
60 #define PCIE_STAT_BUS 0xff00
61 #define PCIE_STAT_DEV 0x1f0000
62 #define PCIE_STAT_LINK_DOWN BIT(0)
63 #define PCIE_RC_RTSTA 0x1a14
64 #define PCIE_DEBUG_CTRL 0x1a60
65 #define PCIE_DEBUG_SOFT_RESET BIT(20)
67 struct mvebu_pcie_port
;
69 /* Structure representing all PCIe interfaces */
71 struct platform_device
*pdev
;
72 struct mvebu_pcie_port
*ports
;
73 struct msi_controller
*msi
;
74 struct list_head resources
;
76 struct resource realio
;
82 struct mvebu_pcie_window
{
88 /* Structure representing one PCIe interface */
89 struct mvebu_pcie_port
{
95 unsigned int mem_target
;
96 unsigned int mem_attr
;
97 unsigned int io_target
;
100 struct gpio_desc
*reset_gpio
;
102 struct pci_bridge_emul bridge
;
103 struct device_node
*dn
;
104 struct mvebu_pcie
*pcie
;
105 struct mvebu_pcie_window memwin
;
106 struct mvebu_pcie_window iowin
;
110 static inline void mvebu_writel(struct mvebu_pcie_port
*port
, u32 val
, u32 reg
)
112 writel(val
, port
->base
+ reg
);
115 static inline u32
mvebu_readl(struct mvebu_pcie_port
*port
, u32 reg
)
117 return readl(port
->base
+ reg
);
120 static inline bool mvebu_has_ioport(struct mvebu_pcie_port
*port
)
122 return port
->io_target
!= -1 && port
->io_attr
!= -1;
125 static bool mvebu_pcie_link_up(struct mvebu_pcie_port
*port
)
127 return !(mvebu_readl(port
, PCIE_STAT_OFF
) & PCIE_STAT_LINK_DOWN
);
130 static void mvebu_pcie_set_local_bus_nr(struct mvebu_pcie_port
*port
, int nr
)
134 stat
= mvebu_readl(port
, PCIE_STAT_OFF
);
135 stat
&= ~PCIE_STAT_BUS
;
137 mvebu_writel(port
, stat
, PCIE_STAT_OFF
);
140 static void mvebu_pcie_set_local_dev_nr(struct mvebu_pcie_port
*port
, int nr
)
144 stat
= mvebu_readl(port
, PCIE_STAT_OFF
);
145 stat
&= ~PCIE_STAT_DEV
;
147 mvebu_writel(port
, stat
, PCIE_STAT_OFF
);
151 * Setup PCIE BARs and Address Decode Wins:
152 * BAR[0,2] -> disabled, BAR[1] -> covers all DRAM banks
153 * WIN[0-3] -> DRAM bank[0-3]
155 static void mvebu_pcie_setup_wins(struct mvebu_pcie_port
*port
)
157 const struct mbus_dram_target_info
*dram
;
161 dram
= mv_mbus_dram_info();
163 /* First, disable and clear BARs and windows. */
164 for (i
= 1; i
< 3; i
++) {
165 mvebu_writel(port
, 0, PCIE_BAR_CTRL_OFF(i
));
166 mvebu_writel(port
, 0, PCIE_BAR_LO_OFF(i
));
167 mvebu_writel(port
, 0, PCIE_BAR_HI_OFF(i
));
170 for (i
= 0; i
< 5; i
++) {
171 mvebu_writel(port
, 0, PCIE_WIN04_CTRL_OFF(i
));
172 mvebu_writel(port
, 0, PCIE_WIN04_BASE_OFF(i
));
173 mvebu_writel(port
, 0, PCIE_WIN04_REMAP_OFF(i
));
176 mvebu_writel(port
, 0, PCIE_WIN5_CTRL_OFF
);
177 mvebu_writel(port
, 0, PCIE_WIN5_BASE_OFF
);
178 mvebu_writel(port
, 0, PCIE_WIN5_REMAP_OFF
);
180 /* Setup windows for DDR banks. Count total DDR size on the fly. */
182 for (i
= 0; i
< dram
->num_cs
; i
++) {
183 const struct mbus_dram_window
*cs
= dram
->cs
+ i
;
185 mvebu_writel(port
, cs
->base
& 0xffff0000,
186 PCIE_WIN04_BASE_OFF(i
));
187 mvebu_writel(port
, 0, PCIE_WIN04_REMAP_OFF(i
));
189 ((cs
->size
- 1) & 0xffff0000) |
190 (cs
->mbus_attr
<< 8) |
191 (dram
->mbus_dram_target_id
<< 4) | 1,
192 PCIE_WIN04_CTRL_OFF(i
));
197 /* Round up 'size' to the nearest power of two. */
198 if ((size
& (size
- 1)) != 0)
199 size
= 1 << fls(size
);
201 /* Setup BAR[1] to all DRAM banks. */
202 mvebu_writel(port
, dram
->cs
[0].base
, PCIE_BAR_LO_OFF(1));
203 mvebu_writel(port
, 0, PCIE_BAR_HI_OFF(1));
204 mvebu_writel(port
, ((size
- 1) & 0xffff0000) | 1,
205 PCIE_BAR_CTRL_OFF(1));
208 static void mvebu_pcie_setup_hw(struct mvebu_pcie_port
*port
)
212 /* Point PCIe unit MBUS decode windows to DRAM space. */
213 mvebu_pcie_setup_wins(port
);
215 /* Master + slave enable. */
216 cmd
= mvebu_readl(port
, PCIE_CMD_OFF
);
217 cmd
|= PCI_COMMAND_IO
;
218 cmd
|= PCI_COMMAND_MEMORY
;
219 cmd
|= PCI_COMMAND_MASTER
;
220 mvebu_writel(port
, cmd
, PCIE_CMD_OFF
);
222 /* Enable interrupt lines A-D. */
223 mask
= mvebu_readl(port
, PCIE_MASK_OFF
);
224 mask
|= PCIE_MASK_ENABLE_INTS
;
225 mvebu_writel(port
, mask
, PCIE_MASK_OFF
);
228 static int mvebu_pcie_hw_rd_conf(struct mvebu_pcie_port
*port
,
230 u32 devfn
, int where
, int size
, u32
*val
)
232 void __iomem
*conf_data
= port
->base
+ PCIE_CONF_DATA_OFF
;
234 mvebu_writel(port
, PCIE_CONF_ADDR(bus
->number
, devfn
, where
),
239 *val
= readb_relaxed(conf_data
+ (where
& 3));
242 *val
= readw_relaxed(conf_data
+ (where
& 2));
245 *val
= readl_relaxed(conf_data
);
249 return PCIBIOS_SUCCESSFUL
;
252 static int mvebu_pcie_hw_wr_conf(struct mvebu_pcie_port
*port
,
254 u32 devfn
, int where
, int size
, u32 val
)
256 void __iomem
*conf_data
= port
->base
+ PCIE_CONF_DATA_OFF
;
258 mvebu_writel(port
, PCIE_CONF_ADDR(bus
->number
, devfn
, where
),
263 writeb(val
, conf_data
+ (where
& 3));
266 writew(val
, conf_data
+ (where
& 2));
269 writel(val
, conf_data
);
272 return PCIBIOS_BAD_REGISTER_NUMBER
;
275 return PCIBIOS_SUCCESSFUL
;
279 * Remove windows, starting from the largest ones to the smallest
282 static void mvebu_pcie_del_windows(struct mvebu_pcie_port
*port
,
283 phys_addr_t base
, size_t size
)
286 size_t sz
= 1 << (fls(size
) - 1);
288 mvebu_mbus_del_window(base
, sz
);
295 * MBus windows can only have a power of two size, but PCI BARs do not
296 * have this constraint. Therefore, we have to split the PCI BAR into
297 * areas each having a power of two size. We start from the largest
298 * one (i.e highest order bit set in the size).
300 static void mvebu_pcie_add_windows(struct mvebu_pcie_port
*port
,
301 unsigned int target
, unsigned int attribute
,
302 phys_addr_t base
, size_t size
,
305 size_t size_mapped
= 0;
308 size_t sz
= 1 << (fls(size
) - 1);
311 ret
= mvebu_mbus_add_window_remap_by_id(target
, attribute
, base
,
314 phys_addr_t end
= base
+ sz
- 1;
316 dev_err(&port
->pcie
->pdev
->dev
,
317 "Could not create MBus window at [mem %pa-%pa]: %d\n",
319 mvebu_pcie_del_windows(port
, base
- size_mapped
,
327 if (remap
!= MVEBU_MBUS_NO_REMAP
)
332 static void mvebu_pcie_set_window(struct mvebu_pcie_port
*port
,
333 unsigned int target
, unsigned int attribute
,
334 const struct mvebu_pcie_window
*desired
,
335 struct mvebu_pcie_window
*cur
)
337 if (desired
->base
== cur
->base
&& desired
->remap
== cur
->remap
&&
338 desired
->size
== cur
->size
)
341 if (cur
->size
!= 0) {
342 mvebu_pcie_del_windows(port
, cur
->base
, cur
->size
);
347 * If something tries to change the window while it is enabled
348 * the change will not be done atomically. That would be
349 * difficult to do in the general case.
353 if (desired
->size
== 0)
356 mvebu_pcie_add_windows(port
, target
, attribute
, desired
->base
,
357 desired
->size
, desired
->remap
);
361 static void mvebu_pcie_handle_iobase_change(struct mvebu_pcie_port
*port
)
363 struct mvebu_pcie_window desired
= {};
364 struct pci_bridge_emul_conf
*conf
= &port
->bridge
.conf
;
366 /* Are the new iobase/iolimit values invalid? */
367 if (conf
->iolimit
< conf
->iobase
||
368 conf
->iolimitupper
< conf
->iobaseupper
||
369 !(conf
->command
& PCI_COMMAND_IO
)) {
370 mvebu_pcie_set_window(port
, port
->io_target
, port
->io_attr
,
371 &desired
, &port
->iowin
);
375 if (!mvebu_has_ioport(port
)) {
376 dev_WARN(&port
->pcie
->pdev
->dev
,
377 "Attempt to set IO when IO is disabled\n");
382 * We read the PCI-to-PCI bridge emulated registers, and
383 * calculate the base address and size of the address decoding
384 * window to setup, according to the PCI-to-PCI bridge
385 * specifications. iobase is the bus address, port->iowin_base
386 * is the CPU address.
388 desired
.remap
= ((conf
->iobase
& 0xF0) << 8) |
389 (conf
->iobaseupper
<< 16);
390 desired
.base
= port
->pcie
->io
.start
+ desired
.remap
;
391 desired
.size
= ((0xFFF | ((conf
->iolimit
& 0xF0) << 8) |
392 (conf
->iolimitupper
<< 16)) -
396 mvebu_pcie_set_window(port
, port
->io_target
, port
->io_attr
, &desired
,
400 static void mvebu_pcie_handle_membase_change(struct mvebu_pcie_port
*port
)
402 struct mvebu_pcie_window desired
= {.remap
= MVEBU_MBUS_NO_REMAP
};
403 struct pci_bridge_emul_conf
*conf
= &port
->bridge
.conf
;
405 /* Are the new membase/memlimit values invalid? */
406 if (conf
->memlimit
< conf
->membase
||
407 !(conf
->command
& PCI_COMMAND_MEMORY
)) {
408 mvebu_pcie_set_window(port
, port
->mem_target
, port
->mem_attr
,
409 &desired
, &port
->memwin
);
414 * We read the PCI-to-PCI bridge emulated registers, and
415 * calculate the base address and size of the address decoding
416 * window to setup, according to the PCI-to-PCI bridge
419 desired
.base
= ((conf
->membase
& 0xFFF0) << 16);
420 desired
.size
= (((conf
->memlimit
& 0xFFF0) << 16) | 0xFFFFF) -
423 mvebu_pcie_set_window(port
, port
->mem_target
, port
->mem_attr
, &desired
,
427 static pci_bridge_emul_read_status_t
428 mvebu_pci_bridge_emul_pcie_conf_read(struct pci_bridge_emul
*bridge
,
431 struct mvebu_pcie_port
*port
= bridge
->data
;
435 *value
= mvebu_readl(port
, PCIE_CAP_PCIEXP
+ PCI_EXP_DEVCAP
);
439 *value
= mvebu_readl(port
, PCIE_CAP_PCIEXP
+ PCI_EXP_DEVCTL
) &
440 ~(PCI_EXP_DEVCTL_URRE
| PCI_EXP_DEVCTL_FERE
|
441 PCI_EXP_DEVCTL_NFERE
| PCI_EXP_DEVCTL_CERE
);
446 * PCIe requires the clock power management capability to be
447 * hard-wired to zero for downstream ports
449 *value
= mvebu_readl(port
, PCIE_CAP_PCIEXP
+ PCI_EXP_LNKCAP
) &
450 ~PCI_EXP_LNKCAP_CLKPM
;
454 *value
= mvebu_readl(port
, PCIE_CAP_PCIEXP
+ PCI_EXP_LNKCTL
);
458 *value
= PCI_EXP_SLTSTA_PDS
<< 16;
462 *value
= mvebu_readl(port
, PCIE_RC_RTSTA
);
466 return PCI_BRIDGE_EMUL_NOT_HANDLED
;
469 return PCI_BRIDGE_EMUL_HANDLED
;
473 mvebu_pci_bridge_emul_base_conf_write(struct pci_bridge_emul
*bridge
,
474 int reg
, u32 old
, u32
new, u32 mask
)
476 struct mvebu_pcie_port
*port
= bridge
->data
;
477 struct pci_bridge_emul_conf
*conf
= &bridge
->conf
;
482 if (!mvebu_has_ioport(port
))
483 conf
->command
&= ~PCI_COMMAND_IO
;
485 if ((old
^ new) & PCI_COMMAND_IO
)
486 mvebu_pcie_handle_iobase_change(port
);
487 if ((old
^ new) & PCI_COMMAND_MEMORY
)
488 mvebu_pcie_handle_membase_change(port
);
495 * We keep bit 1 set, it is a read-only bit that
496 * indicates we support 32 bits addressing for the
499 conf
->iobase
|= PCI_IO_RANGE_TYPE_32
;
500 conf
->iolimit
|= PCI_IO_RANGE_TYPE_32
;
501 mvebu_pcie_handle_iobase_change(port
);
504 case PCI_MEMORY_BASE
:
505 mvebu_pcie_handle_membase_change(port
);
508 case PCI_IO_BASE_UPPER16
:
509 mvebu_pcie_handle_iobase_change(port
);
512 case PCI_PRIMARY_BUS
:
513 mvebu_pcie_set_local_bus_nr(port
, conf
->secondary_bus
);
522 mvebu_pci_bridge_emul_pcie_conf_write(struct pci_bridge_emul
*bridge
,
523 int reg
, u32 old
, u32
new, u32 mask
)
525 struct mvebu_pcie_port
*port
= bridge
->data
;
530 * Armada370 data says these bits must always
531 * be zero when in root complex mode.
533 new &= ~(PCI_EXP_DEVCTL_URRE
| PCI_EXP_DEVCTL_FERE
|
534 PCI_EXP_DEVCTL_NFERE
| PCI_EXP_DEVCTL_CERE
);
536 mvebu_writel(port
, new, PCIE_CAP_PCIEXP
+ PCI_EXP_DEVCTL
);
541 * If we don't support CLKREQ, we must ensure that the
542 * CLKREQ enable bit always reads zero. Since we haven't
543 * had this capability, and it's dependent on board wiring,
544 * disable it for the time being.
546 new &= ~PCI_EXP_LNKCTL_CLKREQ_EN
;
548 mvebu_writel(port
, new, PCIE_CAP_PCIEXP
+ PCI_EXP_LNKCTL
);
552 mvebu_writel(port
, new, PCIE_RC_RTSTA
);
557 struct pci_bridge_emul_ops mvebu_pci_bridge_emul_ops
= {
558 .write_base
= mvebu_pci_bridge_emul_base_conf_write
,
559 .read_pcie
= mvebu_pci_bridge_emul_pcie_conf_read
,
560 .write_pcie
= mvebu_pci_bridge_emul_pcie_conf_write
,
564 * Initialize the configuration space of the PCI-to-PCI bridge
565 * associated with the given PCIe interface.
567 static void mvebu_pci_bridge_emul_init(struct mvebu_pcie_port
*port
)
569 struct pci_bridge_emul
*bridge
= &port
->bridge
;
571 bridge
->conf
.vendor
= PCI_VENDOR_ID_MARVELL
;
572 bridge
->conf
.device
= mvebu_readl(port
, PCIE_DEV_ID_OFF
) >> 16;
573 bridge
->conf
.class_revision
=
574 mvebu_readl(port
, PCIE_DEV_REV_OFF
) & 0xff;
576 if (mvebu_has_ioport(port
)) {
577 /* We support 32 bits I/O addressing */
578 bridge
->conf
.iobase
= PCI_IO_RANGE_TYPE_32
;
579 bridge
->conf
.iolimit
= PCI_IO_RANGE_TYPE_32
;
582 bridge
->has_pcie
= true;
584 bridge
->ops
= &mvebu_pci_bridge_emul_ops
;
586 pci_bridge_emul_init(bridge
, PCI_BRIDGE_EMUL_NO_PREFETCHABLE_BAR
);
589 static inline struct mvebu_pcie
*sys_to_pcie(struct pci_sys_data
*sys
)
591 return sys
->private_data
;
594 static struct mvebu_pcie_port
*mvebu_pcie_find_port(struct mvebu_pcie
*pcie
,
600 for (i
= 0; i
< pcie
->nports
; i
++) {
601 struct mvebu_pcie_port
*port
= &pcie
->ports
[i
];
603 if (bus
->number
== 0 && port
->devfn
== devfn
)
605 if (bus
->number
!= 0 &&
606 bus
->number
>= port
->bridge
.conf
.secondary_bus
&&
607 bus
->number
<= port
->bridge
.conf
.subordinate_bus
)
614 /* PCI configuration space write function */
615 static int mvebu_pcie_wr_conf(struct pci_bus
*bus
, u32 devfn
,
616 int where
, int size
, u32 val
)
618 struct mvebu_pcie
*pcie
= bus
->sysdata
;
619 struct mvebu_pcie_port
*port
;
622 port
= mvebu_pcie_find_port(pcie
, bus
, devfn
);
624 return PCIBIOS_DEVICE_NOT_FOUND
;
626 /* Access the emulated PCI-to-PCI bridge */
627 if (bus
->number
== 0)
628 return pci_bridge_emul_conf_write(&port
->bridge
, where
,
631 if (!mvebu_pcie_link_up(port
))
632 return PCIBIOS_DEVICE_NOT_FOUND
;
634 /* Access the real PCIe interface */
635 ret
= mvebu_pcie_hw_wr_conf(port
, bus
, devfn
,
641 /* PCI configuration space read function */
642 static int mvebu_pcie_rd_conf(struct pci_bus
*bus
, u32 devfn
, int where
,
645 struct mvebu_pcie
*pcie
= bus
->sysdata
;
646 struct mvebu_pcie_port
*port
;
649 port
= mvebu_pcie_find_port(pcie
, bus
, devfn
);
652 return PCIBIOS_DEVICE_NOT_FOUND
;
655 /* Access the emulated PCI-to-PCI bridge */
656 if (bus
->number
== 0)
657 return pci_bridge_emul_conf_read(&port
->bridge
, where
,
660 if (!mvebu_pcie_link_up(port
)) {
662 return PCIBIOS_DEVICE_NOT_FOUND
;
665 /* Access the real PCIe interface */
666 ret
= mvebu_pcie_hw_rd_conf(port
, bus
, devfn
,
672 static struct pci_ops mvebu_pcie_ops
= {
673 .read
= mvebu_pcie_rd_conf
,
674 .write
= mvebu_pcie_wr_conf
,
677 static resource_size_t
mvebu_pcie_align_resource(struct pci_dev
*dev
,
678 const struct resource
*res
,
679 resource_size_t start
,
680 resource_size_t size
,
681 resource_size_t align
)
683 if (dev
->bus
->number
!= 0)
687 * On the PCI-to-PCI bridge side, the I/O windows must have at
688 * least a 64 KB size and the memory windows must have at
689 * least a 1 MB size. Moreover, MBus windows need to have a
690 * base address aligned on their size, and their size must be
691 * a power of two. This means that if the BAR doesn't have a
692 * power of two size, several MBus windows will actually be
693 * created. We need to ensure that the biggest MBus window
694 * (which will be the first one) is aligned on its size, which
695 * explains the rounddown_pow_of_two() being done here.
697 if (res
->flags
& IORESOURCE_IO
)
698 return round_up(start
, max_t(resource_size_t
, SZ_64K
,
699 rounddown_pow_of_two(size
)));
700 else if (res
->flags
& IORESOURCE_MEM
)
701 return round_up(start
, max_t(resource_size_t
, SZ_1M
,
702 rounddown_pow_of_two(size
)));
707 static void __iomem
*mvebu_pcie_map_registers(struct platform_device
*pdev
,
708 struct device_node
*np
,
709 struct mvebu_pcie_port
*port
)
711 struct resource regs
;
714 ret
= of_address_to_resource(np
, 0, ®s
);
718 return devm_ioremap_resource(&pdev
->dev
, ®s
);
721 #define DT_FLAGS_TO_TYPE(flags) (((flags) >> 24) & 0x03)
722 #define DT_TYPE_IO 0x1
723 #define DT_TYPE_MEM32 0x2
724 #define DT_CPUADDR_TO_TARGET(cpuaddr) (((cpuaddr) >> 56) & 0xFF)
725 #define DT_CPUADDR_TO_ATTR(cpuaddr) (((cpuaddr) >> 48) & 0xFF)
727 static int mvebu_get_tgt_attr(struct device_node
*np
, int devfn
,
732 const int na
= 3, ns
= 2;
734 int rlen
, nranges
, rangesz
, pna
, i
;
739 range
= of_get_property(np
, "ranges", &rlen
);
743 pna
= of_n_addr_cells(np
);
744 rangesz
= pna
+ na
+ ns
;
745 nranges
= rlen
/ sizeof(__be32
) / rangesz
;
747 for (i
= 0; i
< nranges
; i
++, range
+= rangesz
) {
748 u32 flags
= of_read_number(range
, 1);
749 u32 slot
= of_read_number(range
+ 1, 1);
750 u64 cpuaddr
= of_read_number(range
+ na
, pna
);
753 if (DT_FLAGS_TO_TYPE(flags
) == DT_TYPE_IO
)
754 rtype
= IORESOURCE_IO
;
755 else if (DT_FLAGS_TO_TYPE(flags
) == DT_TYPE_MEM32
)
756 rtype
= IORESOURCE_MEM
;
760 if (slot
== PCI_SLOT(devfn
) && type
== rtype
) {
761 *tgt
= DT_CPUADDR_TO_TARGET(cpuaddr
);
762 *attr
= DT_CPUADDR_TO_ATTR(cpuaddr
);
770 #ifdef CONFIG_PM_SLEEP
771 static int mvebu_pcie_suspend(struct device
*dev
)
773 struct mvebu_pcie
*pcie
;
776 pcie
= dev_get_drvdata(dev
);
777 for (i
= 0; i
< pcie
->nports
; i
++) {
778 struct mvebu_pcie_port
*port
= pcie
->ports
+ i
;
779 port
->saved_pcie_stat
= mvebu_readl(port
, PCIE_STAT_OFF
);
785 static int mvebu_pcie_resume(struct device
*dev
)
787 struct mvebu_pcie
*pcie
;
790 pcie
= dev_get_drvdata(dev
);
791 for (i
= 0; i
< pcie
->nports
; i
++) {
792 struct mvebu_pcie_port
*port
= pcie
->ports
+ i
;
793 mvebu_writel(port
, port
->saved_pcie_stat
, PCIE_STAT_OFF
);
794 mvebu_pcie_setup_hw(port
);
801 static void mvebu_pcie_port_clk_put(void *data
)
803 struct mvebu_pcie_port
*port
= data
;
808 static int mvebu_pcie_parse_port(struct mvebu_pcie
*pcie
,
809 struct mvebu_pcie_port
*port
, struct device_node
*child
)
811 struct device
*dev
= &pcie
->pdev
->dev
;
812 enum of_gpio_flags flags
;
817 if (of_property_read_u32(child
, "marvell,pcie-port", &port
->port
)) {
818 dev_warn(dev
, "ignoring %pOF, missing pcie-port property\n",
823 if (of_property_read_u32(child
, "marvell,pcie-lane", &port
->lane
))
826 port
->name
= devm_kasprintf(dev
, GFP_KERNEL
, "pcie%d.%d", port
->port
,
833 port
->devfn
= of_pci_get_devfn(child
);
837 ret
= mvebu_get_tgt_attr(dev
->of_node
, port
->devfn
, IORESOURCE_MEM
,
838 &port
->mem_target
, &port
->mem_attr
);
840 dev_err(dev
, "%s: cannot get tgt/attr for mem window\n",
845 if (resource_size(&pcie
->io
) != 0) {
846 mvebu_get_tgt_attr(dev
->of_node
, port
->devfn
, IORESOURCE_IO
,
847 &port
->io_target
, &port
->io_attr
);
849 port
->io_target
= -1;
853 reset_gpio
= of_get_named_gpio_flags(child
, "reset-gpios", 0, &flags
);
854 if (reset_gpio
== -EPROBE_DEFER
) {
859 if (gpio_is_valid(reset_gpio
)) {
860 unsigned long gpio_flags
;
862 port
->reset_name
= devm_kasprintf(dev
, GFP_KERNEL
, "%s-reset",
864 if (!port
->reset_name
) {
869 if (flags
& OF_GPIO_ACTIVE_LOW
) {
870 dev_info(dev
, "%pOF: reset gpio is active low\n",
872 gpio_flags
= GPIOF_ACTIVE_LOW
|
875 gpio_flags
= GPIOF_OUT_INIT_HIGH
;
878 ret
= devm_gpio_request_one(dev
, reset_gpio
, gpio_flags
,
881 if (ret
== -EPROBE_DEFER
)
886 port
->reset_gpio
= gpio_to_desc(reset_gpio
);
889 port
->clk
= of_clk_get_by_name(child
, NULL
);
890 if (IS_ERR(port
->clk
)) {
891 dev_err(dev
, "%s: cannot get clock\n", port
->name
);
895 ret
= devm_add_action(dev
, mvebu_pcie_port_clk_put
, port
);
906 /* In the case of skipping, we need to free these */
907 devm_kfree(dev
, port
->reset_name
);
908 port
->reset_name
= NULL
;
909 devm_kfree(dev
, port
->name
);
917 * Power up a PCIe port. PCIe requires the refclk to be stable for 100µs
918 * prior to releasing PERST. See table 2-4 in section 2.6.2 AC Specifications
919 * of the PCI Express Card Electromechanical Specification, 1.1.
921 static int mvebu_pcie_powerup(struct mvebu_pcie_port
*port
)
925 ret
= clk_prepare_enable(port
->clk
);
929 if (port
->reset_gpio
) {
930 u32 reset_udelay
= PCI_PM_D3COLD_WAIT
* 1000;
932 of_property_read_u32(port
->dn
, "reset-delay-us",
937 gpiod_set_value_cansleep(port
->reset_gpio
, 0);
938 msleep(reset_udelay
/ 1000);
945 * Power down a PCIe port. Strictly, PCIe requires us to place the card
946 * in D3hot state before asserting PERST#.
948 static void mvebu_pcie_powerdown(struct mvebu_pcie_port
*port
)
950 gpiod_set_value_cansleep(port
->reset_gpio
, 1);
952 clk_disable_unprepare(port
->clk
);
956 * We can't use devm_of_pci_get_host_bridge_resources() because we
957 * need to parse our special DT properties encoding the MEM and IO
960 static int mvebu_pcie_parse_request_resources(struct mvebu_pcie
*pcie
)
962 struct device
*dev
= &pcie
->pdev
->dev
;
963 struct device_node
*np
= dev
->of_node
;
966 INIT_LIST_HEAD(&pcie
->resources
);
968 /* Get the bus range */
969 ret
= of_pci_parse_bus_range(np
, &pcie
->busn
);
971 dev_err(dev
, "failed to parse bus-range property: %d\n", ret
);
974 pci_add_resource(&pcie
->resources
, &pcie
->busn
);
976 /* Get the PCIe memory aperture */
977 mvebu_mbus_get_pcie_mem_aperture(&pcie
->mem
);
978 if (resource_size(&pcie
->mem
) == 0) {
979 dev_err(dev
, "invalid memory aperture size\n");
983 pcie
->mem
.name
= "PCI MEM";
984 pci_add_resource(&pcie
->resources
, &pcie
->mem
);
986 /* Get the PCIe IO aperture */
987 mvebu_mbus_get_pcie_io_aperture(&pcie
->io
);
989 if (resource_size(&pcie
->io
) != 0) {
990 pcie
->realio
.flags
= pcie
->io
.flags
;
991 pcie
->realio
.start
= PCIBIOS_MIN_IO
;
992 pcie
->realio
.end
= min_t(resource_size_t
,
993 IO_SPACE_LIMIT
- SZ_64K
,
994 resource_size(&pcie
->io
) - 1);
995 pcie
->realio
.name
= "PCI I/O";
997 pci_add_resource(&pcie
->resources
, &pcie
->realio
);
1000 return devm_request_pci_bus_resources(dev
, &pcie
->resources
);
1004 * This is a copy of pci_host_probe(), except that it does the I/O
1005 * remap as the last step, once we are sure we won't fail.
1007 * It should be removed once the I/O remap error handling issue has
1010 static int mvebu_pci_host_probe(struct pci_host_bridge
*bridge
)
1012 struct mvebu_pcie
*pcie
;
1013 struct pci_bus
*bus
, *child
;
1016 ret
= pci_scan_root_bus_bridge(bridge
);
1018 dev_err(bridge
->dev
.parent
, "Scanning root bridge failed");
1022 pcie
= pci_host_bridge_priv(bridge
);
1023 if (resource_size(&pcie
->io
) != 0) {
1026 for (i
= 0; i
< resource_size(&pcie
->realio
); i
+= SZ_64K
)
1027 pci_ioremap_io(i
, pcie
->io
.start
+ i
);
1033 * We insert PCI resources into the iomem_resource and
1034 * ioport_resource trees in either pci_bus_claim_resources()
1035 * or pci_bus_assign_resources().
1037 if (pci_has_flag(PCI_PROBE_ONLY
)) {
1038 pci_bus_claim_resources(bus
);
1040 pci_bus_size_bridges(bus
);
1041 pci_bus_assign_resources(bus
);
1043 list_for_each_entry(child
, &bus
->children
, node
)
1044 pcie_bus_configure_settings(child
);
1047 pci_bus_add_devices(bus
);
1051 static int mvebu_pcie_probe(struct platform_device
*pdev
)
1053 struct device
*dev
= &pdev
->dev
;
1054 struct mvebu_pcie
*pcie
;
1055 struct pci_host_bridge
*bridge
;
1056 struct device_node
*np
= dev
->of_node
;
1057 struct device_node
*child
;
1060 bridge
= devm_pci_alloc_host_bridge(dev
, sizeof(struct mvebu_pcie
));
1064 pcie
= pci_host_bridge_priv(bridge
);
1066 platform_set_drvdata(pdev
, pcie
);
1068 ret
= mvebu_pcie_parse_request_resources(pcie
);
1072 num
= of_get_available_child_count(np
);
1074 pcie
->ports
= devm_kcalloc(dev
, num
, sizeof(*pcie
->ports
), GFP_KERNEL
);
1079 for_each_available_child_of_node(np
, child
) {
1080 struct mvebu_pcie_port
*port
= &pcie
->ports
[i
];
1082 ret
= mvebu_pcie_parse_port(pcie
, port
, child
);
1086 } else if (ret
== 0) {
1095 for (i
= 0; i
< pcie
->nports
; i
++) {
1096 struct mvebu_pcie_port
*port
= &pcie
->ports
[i
];
1102 ret
= mvebu_pcie_powerup(port
);
1106 port
->base
= mvebu_pcie_map_registers(pdev
, child
, port
);
1107 if (IS_ERR(port
->base
)) {
1108 dev_err(dev
, "%s: cannot map registers\n", port
->name
);
1110 mvebu_pcie_powerdown(port
);
1114 mvebu_pcie_setup_hw(port
);
1115 mvebu_pcie_set_local_dev_nr(port
, 1);
1116 mvebu_pci_bridge_emul_init(port
);
1121 list_splice_init(&pcie
->resources
, &bridge
->windows
);
1122 bridge
->dev
.parent
= dev
;
1123 bridge
->sysdata
= pcie
;
1125 bridge
->ops
= &mvebu_pcie_ops
;
1126 bridge
->map_irq
= of_irq_parse_and_map_pci
;
1127 bridge
->swizzle_irq
= pci_common_swizzle
;
1128 bridge
->align_resource
= mvebu_pcie_align_resource
;
1129 bridge
->msi
= pcie
->msi
;
1131 return mvebu_pci_host_probe(bridge
);
1134 static const struct of_device_id mvebu_pcie_of_match_table
[] = {
1135 { .compatible
= "marvell,armada-xp-pcie", },
1136 { .compatible
= "marvell,armada-370-pcie", },
1137 { .compatible
= "marvell,dove-pcie", },
1138 { .compatible
= "marvell,kirkwood-pcie", },
1142 static const struct dev_pm_ops mvebu_pcie_pm_ops
= {
1143 SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(mvebu_pcie_suspend
, mvebu_pcie_resume
)
1146 static struct platform_driver mvebu_pcie_driver
= {
1148 .name
= "mvebu-pcie",
1149 .of_match_table
= mvebu_pcie_of_match_table
,
1150 /* driver unloading/unbinding currently not supported */
1151 .suppress_bind_attrs
= true,
1152 .pm
= &mvebu_pcie_pm_ops
,
1154 .probe
= mvebu_pcie_probe
,
1156 builtin_platform_driver(mvebu_pcie_driver
);