?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
Bluetooth: Remove unneeded initializer for management command table
[linux/fpc-iii.git] / drivers / tty / serial / altera_uart.c
blobb2859fe07e141a2a578e741412a2bd867f2c5ba2
1 /*
2 * altera_uart.c -- Altera UART driver
3 *
4 * Based on mcf.c -- Freescale ColdFire UART driver
5 *
6 * (C) Copyright 2003-2007, Greg Ungerer <gerg@snapgear.com>
7 * (C) Copyright 2008, Thomas Chou <thomas@wytron.com.tw>
8 * (C) Copyright 2010, Tobias Klauser <tklauser@distanz.ch>
9 *
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License as published by
12 * the Free Software Foundation; either version 2 of the License, or
13 * (at your option) any later version.
14 */
15
16 #include <linux/kernel.h>
17 #include <linux/init.h>
18 #include <linux/timer.h>
19 #include <linux/interrupt.h>
20 #include <linux/module.h>
21 #include <linux/console.h>
22 #include <linux/tty.h>
23 #include <linux/tty_flip.h>
24 #include <linux/serial.h>
25 #include <linux/serial_core.h>
26 #include <linux/platform_device.h>
27 #include <linux/of.h>
28 #include <linux/io.h>
29 #include <linux/altera_uart.h>
30
31 #define DRV_NAME "altera_uart"
32 #define SERIAL_ALTERA_MAJOR 204
33 #define SERIAL_ALTERA_MINOR 213
34
35 /*
36 * Altera UART register definitions according to the Nios UART datasheet:
37 * http://www.altera.com/literature/ds/ds_nios_uart.pdf
38 */
39
40 #define ALTERA_UART_SIZE 32
41
42 #define ALTERA_UART_RXDATA_REG 0
43 #define ALTERA_UART_TXDATA_REG 4
44 #define ALTERA_UART_STATUS_REG 8
45 #define ALTERA_UART_CONTROL_REG 12
46 #define ALTERA_UART_DIVISOR_REG 16
47 #define ALTERA_UART_EOP_REG 20
48
49 #define ALTERA_UART_STATUS_PE_MSK 0x0001 /* parity error */
50 #define ALTERA_UART_STATUS_FE_MSK 0x0002 /* framing error */
51 #define ALTERA_UART_STATUS_BRK_MSK 0x0004 /* break */
52 #define ALTERA_UART_STATUS_ROE_MSK 0x0008 /* RX overrun error */
53 #define ALTERA_UART_STATUS_TOE_MSK 0x0010 /* TX overrun error */
54 #define ALTERA_UART_STATUS_TMT_MSK 0x0020 /* TX shift register state */
55 #define ALTERA_UART_STATUS_TRDY_MSK 0x0040 /* TX ready */
56 #define ALTERA_UART_STATUS_RRDY_MSK 0x0080 /* RX ready */
57 #define ALTERA_UART_STATUS_E_MSK 0x0100 /* exception condition */
58 #define ALTERA_UART_STATUS_DCTS_MSK 0x0400 /* CTS logic-level change */
59 #define ALTERA_UART_STATUS_CTS_MSK 0x0800 /* CTS logic state */
60 #define ALTERA_UART_STATUS_EOP_MSK 0x1000 /* EOP written/read */
61
62 /* Enable interrupt on... */
63 #define ALTERA_UART_CONTROL_PE_MSK 0x0001 /* ...parity error */
64 #define ALTERA_UART_CONTROL_FE_MSK 0x0002 /* ...framing error */
65 #define ALTERA_UART_CONTROL_BRK_MSK 0x0004 /* ...break */
66 #define ALTERA_UART_CONTROL_ROE_MSK 0x0008 /* ...RX overrun */
67 #define ALTERA_UART_CONTROL_TOE_MSK 0x0010 /* ...TX overrun */
68 #define ALTERA_UART_CONTROL_TMT_MSK 0x0020 /* ...TX shift register empty */
69 #define ALTERA_UART_CONTROL_TRDY_MSK 0x0040 /* ...TX ready */
70 #define ALTERA_UART_CONTROL_RRDY_MSK 0x0080 /* ...RX ready */
71 #define ALTERA_UART_CONTROL_E_MSK 0x0100 /* ...exception*/
72
73 #define ALTERA_UART_CONTROL_TRBK_MSK 0x0200 /* TX break */
74 #define ALTERA_UART_CONTROL_DCTS_MSK 0x0400 /* Interrupt on CTS change */
75 #define ALTERA_UART_CONTROL_RTS_MSK 0x0800 /* RTS signal */
76 #define ALTERA_UART_CONTROL_EOP_MSK 0x1000 /* Interrupt on EOP */
77
78 /*
79 * Local per-uart structure.
80 */
81 struct altera_uart {
82 struct uart_port port;
83 struct timer_list tmr;
84 unsigned int sigs; /* Local copy of line sigs */
85 unsigned short imr; /* Local IMR mirror */
86 };
87
88 static u32 altera_uart_readl(struct uart_port *port, int reg)
89 {
90 return readl(port->membase + (reg << port->regshift));
91 }
92
93 static void altera_uart_writel(struct uart_port *port, u32 dat, int reg)
94 {
95 writel(dat, port->membase + (reg << port->regshift));
96 }
97
98 static unsigned int altera_uart_tx_empty(struct uart_port *port)
99 {
100 return (altera_uart_readl(port, ALTERA_UART_STATUS_REG) &
101 ALTERA_UART_STATUS_TMT_MSK) ? TIOCSER_TEMT : 0;
102 }
103
104 static unsigned int altera_uart_get_mctrl(struct uart_port *port)
105 {
106 struct altera_uart *pp = container_of(port, struct altera_uart, port);
107 unsigned int sigs;
108
109 sigs = (altera_uart_readl(port, ALTERA_UART_STATUS_REG) &
110 ALTERA_UART_STATUS_CTS_MSK) ? TIOCM_CTS : 0;
111 sigs |= (pp->sigs & TIOCM_RTS);
112
113 return sigs;
114 }
115
116 static void altera_uart_set_mctrl(struct uart_port *port, unsigned int sigs)
117 {
118 struct altera_uart *pp = container_of(port, struct altera_uart, port);
119
120 pp->sigs = sigs;
121 if (sigs & TIOCM_RTS)
122 pp->imr |= ALTERA_UART_CONTROL_RTS_MSK;
123 else
124 pp->imr &= ~ALTERA_UART_CONTROL_RTS_MSK;
125 altera_uart_writel(port, pp->imr, ALTERA_UART_CONTROL_REG);
126 }
127
128 static void altera_uart_start_tx(struct uart_port *port)
129 {
130 struct altera_uart *pp = container_of(port, struct altera_uart, port);
131
132 pp->imr |= ALTERA_UART_CONTROL_TRDY_MSK;
133 altera_uart_writel(port, pp->imr, ALTERA_UART_CONTROL_REG);
134 }
135
136 static void altera_uart_stop_tx(struct uart_port *port)
137 {
138 struct altera_uart *pp = container_of(port, struct altera_uart, port);
139
140 pp->imr &= ~ALTERA_UART_CONTROL_TRDY_MSK;
141 altera_uart_writel(port, pp->imr, ALTERA_UART_CONTROL_REG);
142 }
143
144 static void altera_uart_stop_rx(struct uart_port *port)
145 {
146 struct altera_uart *pp = container_of(port, struct altera_uart, port);
147
148 pp->imr &= ~ALTERA_UART_CONTROL_RRDY_MSK;
149 altera_uart_writel(port, pp->imr, ALTERA_UART_CONTROL_REG);
150 }
151
152 static void altera_uart_break_ctl(struct uart_port *port, int break_state)
153 {
154 struct altera_uart *pp = container_of(port, struct altera_uart, port);
155 unsigned long flags;
156
157 spin_lock_irqsave(&port->lock, flags);
158 if (break_state == -1)
159 pp->imr |= ALTERA_UART_CONTROL_TRBK_MSK;
160 else
161 pp->imr &= ~ALTERA_UART_CONTROL_TRBK_MSK;
162 altera_uart_writel(port, pp->imr, ALTERA_UART_CONTROL_REG);
163 spin_unlock_irqrestore(&port->lock, flags);
164 }
165
166 static void altera_uart_set_termios(struct uart_port *port,
167 struct ktermios *termios,
168 struct ktermios *old)
169 {
170 unsigned long flags;
171 unsigned int baud, baudclk;
172
173 baud = uart_get_baud_rate(port, termios, old, 0, 4000000);
174 baudclk = port->uartclk / baud;
175
176 if (old)
177 tty_termios_copy_hw(termios, old);
178 tty_termios_encode_baud_rate(termios, baud, baud);
179
180 spin_lock_irqsave(&port->lock, flags);
181 uart_update_timeout(port, termios->c_cflag, baud);
182 altera_uart_writel(port, baudclk, ALTERA_UART_DIVISOR_REG);
183 spin_unlock_irqrestore(&port->lock, flags);
184
185 /*
186 * FIXME: port->read_status_mask and port->ignore_status_mask
187 * need to be initialized based on termios settings for
188 * INPCK, IGNBRK, IGNPAR, PARMRK, BRKINT
189 */
190 }
191
192 static void altera_uart_rx_chars(struct altera_uart *pp)
193 {
194 struct uart_port *port = &pp->port;
195 unsigned char ch, flag;
196 unsigned short status;
197
198 while ((status = altera_uart_readl(port, ALTERA_UART_STATUS_REG)) &
199 ALTERA_UART_STATUS_RRDY_MSK) {
200 ch = altera_uart_readl(port, ALTERA_UART_RXDATA_REG);
201 flag = TTY_NORMAL;
202 port->icount.rx++;
203
204 if (status & ALTERA_UART_STATUS_E_MSK) {
205 altera_uart_writel(port, status,
206 ALTERA_UART_STATUS_REG);
207
208 if (status & ALTERA_UART_STATUS_BRK_MSK) {
209 port->icount.brk++;
210 if (uart_handle_break(port))
211 continue;
212 } else if (status & ALTERA_UART_STATUS_PE_MSK) {
213 port->icount.parity++;
214 } else if (status & ALTERA_UART_STATUS_ROE_MSK) {
215 port->icount.overrun++;
216 } else if (status & ALTERA_UART_STATUS_FE_MSK) {
217 port->icount.frame++;
218 }
219
220 status &= port->read_status_mask;
221
222 if (status & ALTERA_UART_STATUS_BRK_MSK)
223 flag = TTY_BREAK;
224 else if (status & ALTERA_UART_STATUS_PE_MSK)
225 flag = TTY_PARITY;
226 else if (status & ALTERA_UART_STATUS_FE_MSK)
227 flag = TTY_FRAME;
228 }
229
230 if (uart_handle_sysrq_char(port, ch))
231 continue;
232 uart_insert_char(port, status, ALTERA_UART_STATUS_ROE_MSK, ch,
233 flag);
234 }
235
236 spin_unlock(&port->lock);
237 tty_flip_buffer_push(&port->state->port);
238 spin_lock(&port->lock);
239 }
240
241 static void altera_uart_tx_chars(struct altera_uart *pp)
242 {
243 struct uart_port *port = &pp->port;
244 struct circ_buf *xmit = &port->state->xmit;
245
246 if (port->x_char) {
247 /* Send special char - probably flow control */
248 altera_uart_writel(port, port->x_char, ALTERA_UART_TXDATA_REG);
249 port->x_char = 0;
250 port->icount.tx++;
251 return;
252 }
253
254 while (altera_uart_readl(port, ALTERA_UART_STATUS_REG) &
255 ALTERA_UART_STATUS_TRDY_MSK) {
256 if (xmit->head == xmit->tail)
257 break;
258 altera_uart_writel(port, xmit->buf[xmit->tail],
259 ALTERA_UART_TXDATA_REG);
260 xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
261 port->icount.tx++;
262 }
263
264 if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
265 uart_write_wakeup(port);
266
267 if (xmit->head == xmit->tail) {
268 pp->imr &= ~ALTERA_UART_CONTROL_TRDY_MSK;
269 altera_uart_writel(port, pp->imr, ALTERA_UART_CONTROL_REG);
270 }
271 }
272
273 static irqreturn_t altera_uart_interrupt(int irq, void *data)
274 {
275 struct uart_port *port = data;
276 struct altera_uart *pp = container_of(port, struct altera_uart, port);
277 unsigned int isr;
278
279 isr = altera_uart_readl(port, ALTERA_UART_STATUS_REG) & pp->imr;
280
281 spin_lock(&port->lock);
282 if (isr & ALTERA_UART_STATUS_RRDY_MSK)
283 altera_uart_rx_chars(pp);
284 if (isr & ALTERA_UART_STATUS_TRDY_MSK)
285 altera_uart_tx_chars(pp);
286 spin_unlock(&port->lock);
287
288 return IRQ_RETVAL(isr);
289 }
290
291 static void altera_uart_timer(unsigned long data)
292 {
293 struct uart_port *port = (void *)data;
294 struct altera_uart *pp = container_of(port, struct altera_uart, port);
295
296 altera_uart_interrupt(0, port);
297 mod_timer(&pp->tmr, jiffies + uart_poll_timeout(port));
298 }
299
300 static void altera_uart_config_port(struct uart_port *port, int flags)
301 {
302 port->type = PORT_ALTERA_UART;
303
304 /* Clear mask, so no surprise interrupts. */
305 altera_uart_writel(port, 0, ALTERA_UART_CONTROL_REG);
306 /* Clear status register */
307 altera_uart_writel(port, 0, ALTERA_UART_STATUS_REG);
308 }
309
310 static int altera_uart_startup(struct uart_port *port)
311 {
312 struct altera_uart *pp = container_of(port, struct altera_uart, port);
313 unsigned long flags;
314 int ret;
315
316 if (!port->irq) {
317 setup_timer(&pp->tmr, altera_uart_timer, (unsigned long)port);
318 mod_timer(&pp->tmr, jiffies + uart_poll_timeout(port));
319 return 0;
320 }
321
322 ret = request_irq(port->irq, altera_uart_interrupt, 0,
323 DRV_NAME, port);
324 if (ret) {
325 pr_err(DRV_NAME ": unable to attach Altera UART %d "
326 "interrupt vector=%d\n", port->line, port->irq);
327 return ret;
328 }
329
330 spin_lock_irqsave(&port->lock, flags);
331
332 /* Enable RX interrupts now */
333 pp->imr = ALTERA_UART_CONTROL_RRDY_MSK;
334 writel(pp->imr, port->membase + ALTERA_UART_CONTROL_REG);
335
336 spin_unlock_irqrestore(&port->lock, flags);
337
338 return 0;
339 }
340
341 static void altera_uart_shutdown(struct uart_port *port)
342 {
343 struct altera_uart *pp = container_of(port, struct altera_uart, port);
344 unsigned long flags;
345
346 spin_lock_irqsave(&port->lock, flags);
347
348 /* Disable all interrupts now */
349 pp->imr = 0;
350 writel(pp->imr, port->membase + ALTERA_UART_CONTROL_REG);
351
352 spin_unlock_irqrestore(&port->lock, flags);
353
354 if (port->irq)
355 free_irq(port->irq, port);
356 else
357 del_timer_sync(&pp->tmr);
358 }
359
360 static const char *altera_uart_type(struct uart_port *port)
361 {
362 return (port->type == PORT_ALTERA_UART) ? "Altera UART" : NULL;
363 }
364
365 static int altera_uart_request_port(struct uart_port *port)
366 {
367 /* UARTs always present */
368 return 0;
369 }
370
371 static void altera_uart_release_port(struct uart_port *port)
372 {
373 /* Nothing to release... */
374 }
375
376 static int altera_uart_verify_port(struct uart_port *port,
377 struct serial_struct *ser)
378 {
379 if ((ser->type != PORT_UNKNOWN) && (ser->type != PORT_ALTERA_UART))
380 return -EINVAL;
381 return 0;
382 }
383
384 #ifdef CONFIG_CONSOLE_POLL
385 static int altera_uart_poll_get_char(struct uart_port *port)
386 {
387 while (!(altera_uart_readl(port, ALTERA_UART_STATUS_REG) &
388 ALTERA_UART_STATUS_RRDY_MSK))
389 cpu_relax();
390
391 return altera_uart_readl(port, ALTERA_UART_RXDATA_REG);
392 }
393
394 static void altera_uart_poll_put_char(struct uart_port *port, unsigned char c)
395 {
396 while (!(altera_uart_readl(port, ALTERA_UART_STATUS_REG) &
397 ALTERA_UART_STATUS_TRDY_MSK))
398 cpu_relax();
399
400 altera_uart_writel(port, c, ALTERA_UART_TXDATA_REG);
401 }
402 #endif
403
404 /*
405 * Define the basic serial functions we support.
406 */
407 static struct uart_ops altera_uart_ops = {
408 .tx_empty = altera_uart_tx_empty,
409 .get_mctrl = altera_uart_get_mctrl,
410 .set_mctrl = altera_uart_set_mctrl,
411 .start_tx = altera_uart_start_tx,
412 .stop_tx = altera_uart_stop_tx,
413 .stop_rx = altera_uart_stop_rx,
414 .break_ctl = altera_uart_break_ctl,
415 .startup = altera_uart_startup,
416 .shutdown = altera_uart_shutdown,
417 .set_termios = altera_uart_set_termios,
418 .type = altera_uart_type,
419 .request_port = altera_uart_request_port,
420 .release_port = altera_uart_release_port,
421 .config_port = altera_uart_config_port,
422 .verify_port = altera_uart_verify_port,
423 #ifdef CONFIG_CONSOLE_POLL
424 .poll_get_char = altera_uart_poll_get_char,
425 .poll_put_char = altera_uart_poll_put_char,
426 #endif
427 };
428
429 static struct altera_uart altera_uart_ports[CONFIG_SERIAL_ALTERA_UART_MAXPORTS];
430
431 #if defined(CONFIG_SERIAL_ALTERA_UART_CONSOLE)
432
433 static void altera_uart_console_putc(struct uart_port *port, int c)
434 {
435 while (!(altera_uart_readl(port, ALTERA_UART_STATUS_REG) &
436 ALTERA_UART_STATUS_TRDY_MSK))
437 cpu_relax();
438
439 writel(c, port->membase + ALTERA_UART_TXDATA_REG);
440 }
441
442 static void altera_uart_console_write(struct console *co, const char *s,
443 unsigned int count)
444 {
445 struct uart_port *port = &(altera_uart_ports + co->index)->port;
446
447 uart_console_write(port, s, count, altera_uart_console_putc);
448 }
449
450 static int __init altera_uart_console_setup(struct console *co, char *options)
451 {
452 struct uart_port *port;
453 int baud = CONFIG_SERIAL_ALTERA_UART_BAUDRATE;
454 int bits = 8;
455 int parity = 'n';
456 int flow = 'n';
457
458 if (co->index < 0 || co->index >= CONFIG_SERIAL_ALTERA_UART_MAXPORTS)
459 return -EINVAL;
460 port = &altera_uart_ports[co->index].port;
461 if (!port->membase)
462 return -ENODEV;
463
464 if (options)
465 uart_parse_options(options, &baud, &parity, &bits, &flow);
466
467 return uart_set_options(port, co, baud, parity, bits, flow);
468 }
469
470 static struct uart_driver altera_uart_driver;
471
472 static struct console altera_uart_console = {
473 .name = "ttyAL",
474 .write = altera_uart_console_write,
475 .device = uart_console_device,
476 .setup = altera_uart_console_setup,
477 .flags = CON_PRINTBUFFER,
478 .index = -1,
479 .data = &altera_uart_driver,
480 };
481
482 static int __init altera_uart_console_init(void)
483 {
484 register_console(&altera_uart_console);
485 return 0;
486 }
487
488 console_initcall(altera_uart_console_init);
489
490 #define ALTERA_UART_CONSOLE (&altera_uart_console)
491
492 #else
493
494 #define ALTERA_UART_CONSOLE NULL
495
496 #endif /* CONFIG_ALTERA_UART_CONSOLE */
497
498 /*
499 * Define the altera_uart UART driver structure.
500 */
501 static struct uart_driver altera_uart_driver = {
502 .owner = THIS_MODULE,
503 .driver_name = DRV_NAME,
504 .dev_name = "ttyAL",
505 .major = SERIAL_ALTERA_MAJOR,
506 .minor = SERIAL_ALTERA_MINOR,
507 .nr = CONFIG_SERIAL_ALTERA_UART_MAXPORTS,
508 .cons = ALTERA_UART_CONSOLE,
509 };
510
511 #ifdef CONFIG_OF
512 static int altera_uart_get_of_uartclk(struct platform_device *pdev,
513 struct uart_port *port)
514 {
515 int len;
516 const __be32 *clk;
517
518 clk = of_get_property(pdev->dev.of_node, "clock-frequency", &len);
519 if (!clk || len < sizeof(__be32))
520 return -ENODEV;
521
522 port->uartclk = be32_to_cpup(clk);
523
524 return 0;
525 }
526 #else
527 static int altera_uart_get_of_uartclk(struct platform_device *pdev,
528 struct uart_port *port)
529 {
530 return -ENODEV;
531 }
532 #endif /* CONFIG_OF */
533
534 static int altera_uart_probe(struct platform_device *pdev)
535 {
536 struct altera_uart_platform_uart *platp = dev_get_platdata(&pdev->dev);
537 struct uart_port *port;
538 struct resource *res_mem;
539 struct resource *res_irq;
540 int i = pdev->id;
541 int ret;
542
543 /* if id is -1 scan for a free id and use that one */
544 if (i == -1) {
545 for (i = 0; i < CONFIG_SERIAL_ALTERA_UART_MAXPORTS; i++)
546 if (altera_uart_ports[i].port.mapbase == 0)
547 break;
548 }
549
550 if (i < 0 || i >= CONFIG_SERIAL_ALTERA_UART_MAXPORTS)
551 return -EINVAL;
552
553 port = &altera_uart_ports[i].port;
554
555 res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
556 if (res_mem)
557 port->mapbase = res_mem->start;
558 else if (platp)
559 port->mapbase = platp->mapbase;
560 else
561 return -EINVAL;
562
563 res_irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
564 if (res_irq)
565 port->irq = res_irq->start;
566 else if (platp)
567 port->irq = platp->irq;
568
569 /* Check platform data first so we can override device node data */
570 if (platp)
571 port->uartclk = platp->uartclk;
572 else {
573 ret = altera_uart_get_of_uartclk(pdev, port);
574 if (ret)
575 return ret;
576 }
577
578 port->membase = ioremap(port->mapbase, ALTERA_UART_SIZE);
579 if (!port->membase)
580 return -ENOMEM;
581
582 if (platp)
583 port->regshift = platp->bus_shift;
584 else
585 port->regshift = 0;
586
587 port->line = i;
588 port->type = PORT_ALTERA_UART;
589 port->iotype = SERIAL_IO_MEM;
590 port->ops = &altera_uart_ops;
591 port->flags = UPF_BOOT_AUTOCONF;
592 port->dev = &pdev->dev;
593
594 platform_set_drvdata(pdev, port);
595
596 uart_add_one_port(&altera_uart_driver, port);
597
598 return 0;
599 }
600
601 static int altera_uart_remove(struct platform_device *pdev)
602 {
603 struct uart_port *port = platform_get_drvdata(pdev);
604
605 if (port) {
606 uart_remove_one_port(&altera_uart_driver, port);
607 port->mapbase = 0;
608 }
609
610 return 0;
611 }
612
613 #ifdef CONFIG_OF
614 static const struct of_device_id altera_uart_match[] = {
615 { .compatible = "ALTR,uart-1.0", },
616 { .compatible = "altr,uart-1.0", },
617 {},
618 };
619 MODULE_DEVICE_TABLE(of, altera_uart_match);
620 #endif /* CONFIG_OF */
621
622 static struct platform_driver altera_uart_platform_driver = {
623 .probe = altera_uart_probe,
624 .remove = altera_uart_remove,
625 .driver = {
626 .name = DRV_NAME,
627 .of_match_table = of_match_ptr(altera_uart_match),
628 },
629 };
630
631 static int __init altera_uart_init(void)
632 {
633 int rc;
634
635 rc = uart_register_driver(&altera_uart_driver);
636 if (rc)
637 return rc;
638 rc = platform_driver_register(&altera_uart_platform_driver);
639 if (rc)
640 uart_unregister_driver(&altera_uart_driver);
641 return rc;
642 }
643
644 static void __exit altera_uart_exit(void)
645 {
646 platform_driver_unregister(&altera_uart_platform_driver);
647 uart_unregister_driver(&altera_uart_driver);
648 }
649
650 module_init(altera_uart_init);
651 module_exit(altera_uart_exit);
652
653 MODULE_DESCRIPTION("Altera UART driver");
654 MODULE_AUTHOR("Thomas Chou <thomas@wytron.com.tw>");
655 MODULE_LICENSE("GPL");
656 MODULE_ALIAS("platform:" DRV_NAME);
657 MODULE_ALIAS_CHARDEV_MAJOR(SERIAL_ALTERA_MAJOR);
Linux with added FPC-III support