lib/842/842.h

   1
   2 #ifndef __842_H__
   3 #define __842_H__
   4
   5 /* The 842 compressed format is made up of multiple blocks, each of
   6  * which have the format:
   7  *
   8  * <template>[arg1][arg2][arg3][arg4]
   9  *
  10  * where there are between 0 and 4 template args, depending on the specific
  11  * template operation.  For normal operations, each arg is either a specific
  12  * number of data bytes to add to the output buffer, or an index pointing
  13  * to a previously-written number of data bytes to copy to the output buffer.
  14  *
  15  * The template code is a 5-bit value.  This code indicates what to do with
  16  * the following data.  Template codes from 0 to 0x19 should use the template
  17  * table, the static "decomp_ops" table used in decompress.  For each template
  18  * (table row), there are between 1 and 4 actions; each action corresponds to
  19  * an arg following the template code bits.  Each action is either a "data"
  20  * type action, or a "index" type action, and each action results in 2, 4, or 8
  21  * bytes being written to the output buffer.  Each template (i.e. all actions
  22  * in the table row) will add up to 8 bytes being written to the output buffer.
  23  * Any row with less than 4 actions is padded with noop actions, indicated by
  24  * N0 (for which there is no corresponding arg in the compressed data buffer).
  25  *
  26  * "Data" actions, indicated in the table by D2, D4, and D8, mean that the
  27  * corresponding arg is 2, 4, or 8 bytes, respectively, in the compressed data
  28  * buffer should be copied directly to the output buffer.
  29  *
  30  * "Index" actions, indicated in the table by I2, I4, and I8, mean the
  31  * corresponding arg is an index parameter that points to, respectively, a 2,
  32  * 4, or 8 byte value already in the output buffer, that should be copied to
  33  * the end of the output buffer.  Essentially, the index points to a position
  34  * in a ring buffer that contains the last N bytes of output buffer data.
  35  * The number of bits for each index's arg are: 8 bits for I2, 9 bits for I4,
  36  * and 8 bits for I8.  Since each index points to a 2, 4, or 8 byte section,
  37  * this means that I2 can reference 512 bytes ((2^8 bits = 256) * 2 bytes), I4
  38  * can reference 2048 bytes ((2^9 = 512) * 4 bytes), and I8 can reference 2048
  39  * bytes ((2^8 = 256) * 8 bytes).  Think of it as a kind-of ring buffer for
  40  * each of I2, I4, and I8 that are updated for each byte written to the output
  41  * buffer.  In this implementation, the output buffer is directly used for each
  42  * index; there is no additional memory required.  Note that the index is into
  43  * a ring buffer, not a sliding window; for example, if there have been 260
  44  * bytes written to the output buffer, an I2 index of 0 would index to byte 256
  45  * in the output buffer, while an I2 index of 16 would index to byte 16 in the
  46  * output buffer.
  47  *
  48  * There are also 3 special template codes; 0x1b for "repeat", 0x1c for
  49  * "zeros", and 0x1e for "end".  The "repeat" operation is followed by a 6 bit
  50  * arg N indicating how many times to repeat.  The last 8 bytes written to the
  51  * output buffer are written again to the output buffer, N + 1 times.  The
  52  * "zeros" operation, which has no arg bits, writes 8 zeros to the output
  53  * buffer.  The "end" operation, which also has no arg bits, signals the end
  54  * of the compressed data.  There may be some number of padding (don't care,
  55  * but usually 0) bits after the "end" operation bits, to fill the buffer
  56  * length to a specific byte multiple (usually a multiple of 8, 16, or 32
  57  * bytes).
  58  *
  59  * This software implementation also uses one of the undefined template values,
  60  * 0x1d as a special "short data" template code, to represent less than 8 bytes
  61  * of uncompressed data.  It is followed by a 3 bit arg N indicating how many
  62  * data bytes will follow, and then N bytes of data, which should be copied to
  63  * the output buffer.  This allows the software 842 compressor to accept input
  64  * buffers that are not an exact multiple of 8 bytes long.  However, those
  65  * compressed buffers containing this sw-only template will be rejected by
  66  * the 842 hardware decompressor, and must be decompressed with this software
  67  * library.  The 842 software compression module includes a parameter to
  68  * disable using this sw-only "short data" template, and instead simply
  69  * reject any input buffer that is not a multiple of 8 bytes long.
  70  *
  71  * After all actions for each operation code are processed, another template
  72  * code is in the next 5 bits.  The decompression ends once the "end" template
  73  * code is detected.
  74  */
  75
  76 #include <linux/module.h>
  77 #include <linux/kernel.h>
  78 #include <linux/bitops.h>
  79 #include <linux/crc32.h>
  80 #include <asm/unaligned.h>
  81
  82 #include <linux/sw842.h>
  83
  84 /* special templates */
  85 #define OP_REPEAT       (0x1B)
  86 #define OP_ZEROS        (0x1C)
  87 #define OP_END          (0x1E)
  88
  89 /* sw only template - this is not in the hw design; it's used only by this
  90  * software compressor and decompressor, to allow input buffers that aren't
  91  * a multiple of 8.
  92  */
  93 #define OP_SHORT_DATA   (0x1D)
  94
  95 /* additional bits of each op param */
  96 #define OP_BITS         (5)
  97 #define REPEAT_BITS     (6)
  98 #define SHORT_DATA_BITS (3)
  99 #define I2_BITS         (8)
 100 #define I4_BITS         (9)
 101 #define I8_BITS         (8)
 102 #define CRC_BITS        (32)
 103
 104 #define REPEAT_BITS_MAX         (0x3f)
 105 #define SHORT_DATA_BITS_MAX     (0x7)
 106
 107 /* Arbitrary values used to indicate action */
 108 #define OP_ACTION       (0x70)
 109 #define OP_ACTION_INDEX (0x10)
 110 #define OP_ACTION_DATA  (0x20)
 111 #define OP_ACTION_NOOP  (0x40)
 112 #define OP_AMOUNT       (0x0f)
 113 #define OP_AMOUNT_0     (0x00)
 114 #define OP_AMOUNT_2     (0x02)
 115 #define OP_AMOUNT_4     (0x04)
 116 #define OP_AMOUNT_8     (0x08)
 117
 118 #define D2              (OP_ACTION_DATA  | OP_AMOUNT_2)
 119 #define D4              (OP_ACTION_DATA  | OP_AMOUNT_4)
 120 #define D8              (OP_ACTION_DATA  | OP_AMOUNT_8)
 121 #define I2              (OP_ACTION_INDEX | OP_AMOUNT_2)
 122 #define I4              (OP_ACTION_INDEX | OP_AMOUNT_4)
 123 #define I8              (OP_ACTION_INDEX | OP_AMOUNT_8)
 124 #define N0              (OP_ACTION_NOOP  | OP_AMOUNT_0)
 125
 126 /* the max of the regular templates - not including the special templates */
 127 #define OPS_MAX         (0x1a)
 128
 129 #endif