scsi: use pci_zalloc_consistent
[linux/fpc-iii.git] / drivers / scsi / pm8001 / pm8001_sas.c
blob76570e6a547d26df5cfaffa715c9f49310085467
1 /*
2 * PMC-Sierra PM8001/8081/8088/8089 SAS/SATA based host adapters driver
4 * Copyright (c) 2008-2009 USI Co., Ltd.
5 * All rights reserved.
7 * Redistribution and use in source and binary forms, with or without
8 * modification, are permitted provided that the following conditions
9 * are met:
10 * 1. Redistributions of source code must retain the above copyright
11 * notice, this list of conditions, and the following disclaimer,
12 * without modification.
13 * 2. Redistributions in binary form must reproduce at minimum a disclaimer
14 * substantially similar to the "NO WARRANTY" disclaimer below
15 * ("Disclaimer") and any redistribution must be conditioned upon
16 * including a substantially similar Disclaimer requirement for further
17 * binary redistribution.
18 * 3. Neither the names of the above-listed copyright holders nor the names
19 * of any contributors may be used to endorse or promote products derived
20 * from this software without specific prior written permission.
22 * Alternatively, this software may be distributed under the terms of the
23 * GNU General Public License ("GPL") version 2 as published by the Free
24 * Software Foundation.
26 * NO WARRANTY
27 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
28 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
29 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
30 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
31 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
32 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
33 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
34 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
35 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
36 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
37 * POSSIBILITY OF SUCH DAMAGES.
41 #include <linux/slab.h>
42 #include "pm8001_sas.h"
44 /**
45 * pm8001_find_tag - from sas task to find out tag that belongs to this task
46 * @task: the task sent to the LLDD
47 * @tag: the found tag associated with the task
49 static int pm8001_find_tag(struct sas_task *task, u32 *tag)
51 if (task->lldd_task) {
52 struct pm8001_ccb_info *ccb;
53 ccb = task->lldd_task;
54 *tag = ccb->ccb_tag;
55 return 1;
57 return 0;
60 /**
61 * pm8001_tag_free - free the no more needed tag
62 * @pm8001_ha: our hba struct
63 * @tag: the found tag associated with the task
65 void pm8001_tag_free(struct pm8001_hba_info *pm8001_ha, u32 tag)
67 void *bitmap = pm8001_ha->tags;
68 clear_bit(tag, bitmap);
71 /**
72 * pm8001_tag_alloc - allocate a empty tag for task used.
73 * @pm8001_ha: our hba struct
74 * @tag_out: the found empty tag .
76 inline int pm8001_tag_alloc(struct pm8001_hba_info *pm8001_ha, u32 *tag_out)
78 unsigned int tag;
79 void *bitmap = pm8001_ha->tags;
80 unsigned long flags;
82 spin_lock_irqsave(&pm8001_ha->bitmap_lock, flags);
83 tag = find_first_zero_bit(bitmap, pm8001_ha->tags_num);
84 if (tag >= pm8001_ha->tags_num) {
85 spin_unlock_irqrestore(&pm8001_ha->bitmap_lock, flags);
86 return -SAS_QUEUE_FULL;
88 set_bit(tag, bitmap);
89 spin_unlock_irqrestore(&pm8001_ha->bitmap_lock, flags);
90 *tag_out = tag;
91 return 0;
94 void pm8001_tag_init(struct pm8001_hba_info *pm8001_ha)
96 int i;
97 for (i = 0; i < pm8001_ha->tags_num; ++i)
98 pm8001_tag_free(pm8001_ha, i);
102 * pm8001_mem_alloc - allocate memory for pm8001.
103 * @pdev: pci device.
104 * @virt_addr: the allocated virtual address
105 * @pphys_addr_hi: the physical address high byte address.
106 * @pphys_addr_lo: the physical address low byte address.
107 * @mem_size: memory size.
109 int pm8001_mem_alloc(struct pci_dev *pdev, void **virt_addr,
110 dma_addr_t *pphys_addr, u32 *pphys_addr_hi,
111 u32 *pphys_addr_lo, u32 mem_size, u32 align)
113 caddr_t mem_virt_alloc;
114 dma_addr_t mem_dma_handle;
115 u64 phys_align;
116 u64 align_offset = 0;
117 if (align)
118 align_offset = (dma_addr_t)align - 1;
119 mem_virt_alloc = pci_zalloc_consistent(pdev, mem_size + align,
120 &mem_dma_handle);
121 if (!mem_virt_alloc) {
122 pm8001_printk("memory allocation error\n");
123 return -1;
125 *pphys_addr = mem_dma_handle;
126 phys_align = (*pphys_addr + align_offset) & ~align_offset;
127 *virt_addr = (void *)mem_virt_alloc + phys_align - *pphys_addr;
128 *pphys_addr_hi = upper_32_bits(phys_align);
129 *pphys_addr_lo = lower_32_bits(phys_align);
130 return 0;
133 * pm8001_find_ha_by_dev - from domain device which come from sas layer to
134 * find out our hba struct.
135 * @dev: the domain device which from sas layer.
137 static
138 struct pm8001_hba_info *pm8001_find_ha_by_dev(struct domain_device *dev)
140 struct sas_ha_struct *sha = dev->port->ha;
141 struct pm8001_hba_info *pm8001_ha = sha->lldd_ha;
142 return pm8001_ha;
146 * pm8001_phy_control - this function should be registered to
147 * sas_domain_function_template to provide libsas used, note: this is just
148 * control the HBA phy rather than other expander phy if you want control
149 * other phy, you should use SMP command.
150 * @sas_phy: which phy in HBA phys.
151 * @func: the operation.
152 * @funcdata: always NULL.
154 int pm8001_phy_control(struct asd_sas_phy *sas_phy, enum phy_func func,
155 void *funcdata)
157 int rc = 0, phy_id = sas_phy->id;
158 struct pm8001_hba_info *pm8001_ha = NULL;
159 struct sas_phy_linkrates *rates;
160 DECLARE_COMPLETION_ONSTACK(completion);
161 unsigned long flags;
162 pm8001_ha = sas_phy->ha->lldd_ha;
163 pm8001_ha->phy[phy_id].enable_completion = &completion;
164 switch (func) {
165 case PHY_FUNC_SET_LINK_RATE:
166 rates = funcdata;
167 if (rates->minimum_linkrate) {
168 pm8001_ha->phy[phy_id].minimum_linkrate =
169 rates->minimum_linkrate;
171 if (rates->maximum_linkrate) {
172 pm8001_ha->phy[phy_id].maximum_linkrate =
173 rates->maximum_linkrate;
175 if (pm8001_ha->phy[phy_id].phy_state == 0) {
176 PM8001_CHIP_DISP->phy_start_req(pm8001_ha, phy_id);
177 wait_for_completion(&completion);
179 PM8001_CHIP_DISP->phy_ctl_req(pm8001_ha, phy_id,
180 PHY_LINK_RESET);
181 break;
182 case PHY_FUNC_HARD_RESET:
183 if (pm8001_ha->phy[phy_id].phy_state == 0) {
184 PM8001_CHIP_DISP->phy_start_req(pm8001_ha, phy_id);
185 wait_for_completion(&completion);
187 PM8001_CHIP_DISP->phy_ctl_req(pm8001_ha, phy_id,
188 PHY_HARD_RESET);
189 break;
190 case PHY_FUNC_LINK_RESET:
191 if (pm8001_ha->phy[phy_id].phy_state == 0) {
192 PM8001_CHIP_DISP->phy_start_req(pm8001_ha, phy_id);
193 wait_for_completion(&completion);
195 PM8001_CHIP_DISP->phy_ctl_req(pm8001_ha, phy_id,
196 PHY_LINK_RESET);
197 break;
198 case PHY_FUNC_RELEASE_SPINUP_HOLD:
199 PM8001_CHIP_DISP->phy_ctl_req(pm8001_ha, phy_id,
200 PHY_LINK_RESET);
201 break;
202 case PHY_FUNC_DISABLE:
203 PM8001_CHIP_DISP->phy_stop_req(pm8001_ha, phy_id);
204 break;
205 case PHY_FUNC_GET_EVENTS:
206 spin_lock_irqsave(&pm8001_ha->lock, flags);
207 if (pm8001_ha->chip_id == chip_8001) {
208 if (-1 == pm8001_bar4_shift(pm8001_ha,
209 (phy_id < 4) ? 0x30000 : 0x40000)) {
210 spin_unlock_irqrestore(&pm8001_ha->lock, flags);
211 return -EINVAL;
215 struct sas_phy *phy = sas_phy->phy;
216 uint32_t *qp = (uint32_t *)(((char *)
217 pm8001_ha->io_mem[2].memvirtaddr)
218 + 0x1034 + (0x4000 * (phy_id & 3)));
220 phy->invalid_dword_count = qp[0];
221 phy->running_disparity_error_count = qp[1];
222 phy->loss_of_dword_sync_count = qp[3];
223 phy->phy_reset_problem_count = qp[4];
225 if (pm8001_ha->chip_id == chip_8001)
226 pm8001_bar4_shift(pm8001_ha, 0);
227 spin_unlock_irqrestore(&pm8001_ha->lock, flags);
228 return 0;
229 default:
230 rc = -EOPNOTSUPP;
232 msleep(300);
233 return rc;
237 * pm8001_scan_start - we should enable all HBA phys by sending the phy_start
238 * command to HBA.
239 * @shost: the scsi host data.
241 void pm8001_scan_start(struct Scsi_Host *shost)
243 int i;
244 struct pm8001_hba_info *pm8001_ha;
245 struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
246 pm8001_ha = sha->lldd_ha;
247 /* SAS_RE_INITIALIZATION not available in SPCv/ve */
248 if (pm8001_ha->chip_id == chip_8001)
249 PM8001_CHIP_DISP->sas_re_init_req(pm8001_ha);
250 for (i = 0; i < pm8001_ha->chip->n_phy; ++i)
251 PM8001_CHIP_DISP->phy_start_req(pm8001_ha, i);
254 int pm8001_scan_finished(struct Scsi_Host *shost, unsigned long time)
256 struct sas_ha_struct *ha = SHOST_TO_SAS_HA(shost);
258 /* give the phy enabling interrupt event time to come in (1s
259 * is empirically about all it takes) */
260 if (time < HZ)
261 return 0;
262 /* Wait for discovery to finish */
263 sas_drain_work(ha);
264 return 1;
268 * pm8001_task_prep_smp - the dispatcher function, prepare data for smp task
269 * @pm8001_ha: our hba card information
270 * @ccb: the ccb which attached to smp task
272 static int pm8001_task_prep_smp(struct pm8001_hba_info *pm8001_ha,
273 struct pm8001_ccb_info *ccb)
275 return PM8001_CHIP_DISP->smp_req(pm8001_ha, ccb);
278 u32 pm8001_get_ncq_tag(struct sas_task *task, u32 *tag)
280 struct ata_queued_cmd *qc = task->uldd_task;
281 if (qc) {
282 if (qc->tf.command == ATA_CMD_FPDMA_WRITE ||
283 qc->tf.command == ATA_CMD_FPDMA_READ) {
284 *tag = qc->tag;
285 return 1;
288 return 0;
292 * pm8001_task_prep_ata - the dispatcher function, prepare data for sata task
293 * @pm8001_ha: our hba card information
294 * @ccb: the ccb which attached to sata task
296 static int pm8001_task_prep_ata(struct pm8001_hba_info *pm8001_ha,
297 struct pm8001_ccb_info *ccb)
299 return PM8001_CHIP_DISP->sata_req(pm8001_ha, ccb);
303 * pm8001_task_prep_ssp_tm - the dispatcher function, prepare task management data
304 * @pm8001_ha: our hba card information
305 * @ccb: the ccb which attached to TM
306 * @tmf: the task management IU
308 static int pm8001_task_prep_ssp_tm(struct pm8001_hba_info *pm8001_ha,
309 struct pm8001_ccb_info *ccb, struct pm8001_tmf_task *tmf)
311 return PM8001_CHIP_DISP->ssp_tm_req(pm8001_ha, ccb, tmf);
315 * pm8001_task_prep_ssp - the dispatcher function,prepare ssp data for ssp task
316 * @pm8001_ha: our hba card information
317 * @ccb: the ccb which attached to ssp task
319 static int pm8001_task_prep_ssp(struct pm8001_hba_info *pm8001_ha,
320 struct pm8001_ccb_info *ccb)
322 return PM8001_CHIP_DISP->ssp_io_req(pm8001_ha, ccb);
325 /* Find the local port id that's attached to this device */
326 static int sas_find_local_port_id(struct domain_device *dev)
328 struct domain_device *pdev = dev->parent;
330 /* Directly attached device */
331 if (!pdev)
332 return dev->port->id;
333 while (pdev) {
334 struct domain_device *pdev_p = pdev->parent;
335 if (!pdev_p)
336 return pdev->port->id;
337 pdev = pdev->parent;
339 return 0;
343 * pm8001_task_exec - queue the task(ssp, smp && ata) to the hardware.
344 * @task: the task to be execute.
345 * @num: if can_queue great than 1, the task can be queued up. for SMP task,
346 * we always execute one one time.
347 * @gfp_flags: gfp_flags.
348 * @is_tmf: if it is task management task.
349 * @tmf: the task management IU
351 #define DEV_IS_GONE(pm8001_dev) \
352 ((!pm8001_dev || (pm8001_dev->dev_type == SAS_PHY_UNUSED)))
353 static int pm8001_task_exec(struct sas_task *task, const int num,
354 gfp_t gfp_flags, int is_tmf, struct pm8001_tmf_task *tmf)
356 struct domain_device *dev = task->dev;
357 struct pm8001_hba_info *pm8001_ha;
358 struct pm8001_device *pm8001_dev;
359 struct pm8001_port *port = NULL;
360 struct sas_task *t = task;
361 struct pm8001_ccb_info *ccb;
362 u32 tag = 0xdeadbeef, rc, n_elem = 0;
363 u32 n = num;
364 unsigned long flags = 0;
366 if (!dev->port) {
367 struct task_status_struct *tsm = &t->task_status;
368 tsm->resp = SAS_TASK_UNDELIVERED;
369 tsm->stat = SAS_PHY_DOWN;
370 if (dev->dev_type != SAS_SATA_DEV)
371 t->task_done(t);
372 return 0;
374 pm8001_ha = pm8001_find_ha_by_dev(task->dev);
375 PM8001_IO_DBG(pm8001_ha, pm8001_printk("pm8001_task_exec device \n "));
376 spin_lock_irqsave(&pm8001_ha->lock, flags);
377 do {
378 dev = t->dev;
379 pm8001_dev = dev->lldd_dev;
380 port = &pm8001_ha->port[sas_find_local_port_id(dev)];
381 if (DEV_IS_GONE(pm8001_dev) || !port->port_attached) {
382 if (sas_protocol_ata(t->task_proto)) {
383 struct task_status_struct *ts = &t->task_status;
384 ts->resp = SAS_TASK_UNDELIVERED;
385 ts->stat = SAS_PHY_DOWN;
387 spin_unlock_irqrestore(&pm8001_ha->lock, flags);
388 t->task_done(t);
389 spin_lock_irqsave(&pm8001_ha->lock, flags);
390 if (n > 1)
391 t = list_entry(t->list.next,
392 struct sas_task, list);
393 continue;
394 } else {
395 struct task_status_struct *ts = &t->task_status;
396 ts->resp = SAS_TASK_UNDELIVERED;
397 ts->stat = SAS_PHY_DOWN;
398 t->task_done(t);
399 if (n > 1)
400 t = list_entry(t->list.next,
401 struct sas_task, list);
402 continue;
405 rc = pm8001_tag_alloc(pm8001_ha, &tag);
406 if (rc)
407 goto err_out;
408 ccb = &pm8001_ha->ccb_info[tag];
410 if (!sas_protocol_ata(t->task_proto)) {
411 if (t->num_scatter) {
412 n_elem = dma_map_sg(pm8001_ha->dev,
413 t->scatter,
414 t->num_scatter,
415 t->data_dir);
416 if (!n_elem) {
417 rc = -ENOMEM;
418 goto err_out_tag;
421 } else {
422 n_elem = t->num_scatter;
425 t->lldd_task = ccb;
426 ccb->n_elem = n_elem;
427 ccb->ccb_tag = tag;
428 ccb->task = t;
429 ccb->device = pm8001_dev;
430 switch (t->task_proto) {
431 case SAS_PROTOCOL_SMP:
432 rc = pm8001_task_prep_smp(pm8001_ha, ccb);
433 break;
434 case SAS_PROTOCOL_SSP:
435 if (is_tmf)
436 rc = pm8001_task_prep_ssp_tm(pm8001_ha,
437 ccb, tmf);
438 else
439 rc = pm8001_task_prep_ssp(pm8001_ha, ccb);
440 break;
441 case SAS_PROTOCOL_SATA:
442 case SAS_PROTOCOL_STP:
443 rc = pm8001_task_prep_ata(pm8001_ha, ccb);
444 break;
445 default:
446 dev_printk(KERN_ERR, pm8001_ha->dev,
447 "unknown sas_task proto: 0x%x\n",
448 t->task_proto);
449 rc = -EINVAL;
450 break;
453 if (rc) {
454 PM8001_IO_DBG(pm8001_ha,
455 pm8001_printk("rc is %x\n", rc));
456 goto err_out_tag;
458 /* TODO: select normal or high priority */
459 spin_lock(&t->task_state_lock);
460 t->task_state_flags |= SAS_TASK_AT_INITIATOR;
461 spin_unlock(&t->task_state_lock);
462 pm8001_dev->running_req++;
463 if (n > 1)
464 t = list_entry(t->list.next, struct sas_task, list);
465 } while (--n);
466 rc = 0;
467 goto out_done;
469 err_out_tag:
470 pm8001_tag_free(pm8001_ha, tag);
471 err_out:
472 dev_printk(KERN_ERR, pm8001_ha->dev, "pm8001 exec failed[%d]!\n", rc);
473 if (!sas_protocol_ata(t->task_proto))
474 if (n_elem)
475 dma_unmap_sg(pm8001_ha->dev, t->scatter, n_elem,
476 t->data_dir);
477 out_done:
478 spin_unlock_irqrestore(&pm8001_ha->lock, flags);
479 return rc;
483 * pm8001_queue_command - register for upper layer used, all IO commands sent
484 * to HBA are from this interface.
485 * @task: the task to be execute.
486 * @num: if can_queue great than 1, the task can be queued up. for SMP task,
487 * we always execute one one time
488 * @gfp_flags: gfp_flags
490 int pm8001_queue_command(struct sas_task *task, const int num,
491 gfp_t gfp_flags)
493 return pm8001_task_exec(task, num, gfp_flags, 0, NULL);
497 * pm8001_ccb_task_free - free the sg for ssp and smp command, free the ccb.
498 * @pm8001_ha: our hba card information
499 * @ccb: the ccb which attached to ssp task
500 * @task: the task to be free.
501 * @ccb_idx: ccb index.
503 void pm8001_ccb_task_free(struct pm8001_hba_info *pm8001_ha,
504 struct sas_task *task, struct pm8001_ccb_info *ccb, u32 ccb_idx)
506 if (!ccb->task)
507 return;
508 if (!sas_protocol_ata(task->task_proto))
509 if (ccb->n_elem)
510 dma_unmap_sg(pm8001_ha->dev, task->scatter,
511 task->num_scatter, task->data_dir);
513 switch (task->task_proto) {
514 case SAS_PROTOCOL_SMP:
515 dma_unmap_sg(pm8001_ha->dev, &task->smp_task.smp_resp, 1,
516 PCI_DMA_FROMDEVICE);
517 dma_unmap_sg(pm8001_ha->dev, &task->smp_task.smp_req, 1,
518 PCI_DMA_TODEVICE);
519 break;
521 case SAS_PROTOCOL_SATA:
522 case SAS_PROTOCOL_STP:
523 case SAS_PROTOCOL_SSP:
524 default:
525 /* do nothing */
526 break;
528 task->lldd_task = NULL;
529 ccb->task = NULL;
530 ccb->ccb_tag = 0xFFFFFFFF;
531 ccb->open_retry = 0;
532 pm8001_tag_free(pm8001_ha, ccb_idx);
536 * pm8001_alloc_dev - find a empty pm8001_device
537 * @pm8001_ha: our hba card information
539 struct pm8001_device *pm8001_alloc_dev(struct pm8001_hba_info *pm8001_ha)
541 u32 dev;
542 for (dev = 0; dev < PM8001_MAX_DEVICES; dev++) {
543 if (pm8001_ha->devices[dev].dev_type == SAS_PHY_UNUSED) {
544 pm8001_ha->devices[dev].id = dev;
545 return &pm8001_ha->devices[dev];
548 if (dev == PM8001_MAX_DEVICES) {
549 PM8001_FAIL_DBG(pm8001_ha,
550 pm8001_printk("max support %d devices, ignore ..\n",
551 PM8001_MAX_DEVICES));
553 return NULL;
556 * pm8001_find_dev - find a matching pm8001_device
557 * @pm8001_ha: our hba card information
559 struct pm8001_device *pm8001_find_dev(struct pm8001_hba_info *pm8001_ha,
560 u32 device_id)
562 u32 dev;
563 for (dev = 0; dev < PM8001_MAX_DEVICES; dev++) {
564 if (pm8001_ha->devices[dev].device_id == device_id)
565 return &pm8001_ha->devices[dev];
567 if (dev == PM8001_MAX_DEVICES) {
568 PM8001_FAIL_DBG(pm8001_ha, pm8001_printk("NO MATCHING "
569 "DEVICE FOUND !!!\n"));
571 return NULL;
574 static void pm8001_free_dev(struct pm8001_device *pm8001_dev)
576 u32 id = pm8001_dev->id;
577 memset(pm8001_dev, 0, sizeof(*pm8001_dev));
578 pm8001_dev->id = id;
579 pm8001_dev->dev_type = SAS_PHY_UNUSED;
580 pm8001_dev->device_id = PM8001_MAX_DEVICES;
581 pm8001_dev->sas_device = NULL;
585 * pm8001_dev_found_notify - libsas notify a device is found.
586 * @dev: the device structure which sas layer used.
588 * when libsas find a sas domain device, it should tell the LLDD that
589 * device is found, and then LLDD register this device to HBA firmware
590 * by the command "OPC_INB_REG_DEV", after that the HBA will assign a
591 * device ID(according to device's sas address) and returned it to LLDD. From
592 * now on, we communicate with HBA FW with the device ID which HBA assigned
593 * rather than sas address. it is the necessary step for our HBA but it is
594 * the optional for other HBA driver.
596 static int pm8001_dev_found_notify(struct domain_device *dev)
598 unsigned long flags = 0;
599 int res = 0;
600 struct pm8001_hba_info *pm8001_ha = NULL;
601 struct domain_device *parent_dev = dev->parent;
602 struct pm8001_device *pm8001_device;
603 DECLARE_COMPLETION_ONSTACK(completion);
604 u32 flag = 0;
605 pm8001_ha = pm8001_find_ha_by_dev(dev);
606 spin_lock_irqsave(&pm8001_ha->lock, flags);
608 pm8001_device = pm8001_alloc_dev(pm8001_ha);
609 if (!pm8001_device) {
610 res = -1;
611 goto found_out;
613 pm8001_device->sas_device = dev;
614 dev->lldd_dev = pm8001_device;
615 pm8001_device->dev_type = dev->dev_type;
616 pm8001_device->dcompletion = &completion;
617 if (parent_dev && DEV_IS_EXPANDER(parent_dev->dev_type)) {
618 int phy_id;
619 struct ex_phy *phy;
620 for (phy_id = 0; phy_id < parent_dev->ex_dev.num_phys;
621 phy_id++) {
622 phy = &parent_dev->ex_dev.ex_phy[phy_id];
623 if (SAS_ADDR(phy->attached_sas_addr)
624 == SAS_ADDR(dev->sas_addr)) {
625 pm8001_device->attached_phy = phy_id;
626 break;
629 if (phy_id == parent_dev->ex_dev.num_phys) {
630 PM8001_FAIL_DBG(pm8001_ha,
631 pm8001_printk("Error: no attached dev:%016llx"
632 " at ex:%016llx.\n", SAS_ADDR(dev->sas_addr),
633 SAS_ADDR(parent_dev->sas_addr)));
634 res = -1;
636 } else {
637 if (dev->dev_type == SAS_SATA_DEV) {
638 pm8001_device->attached_phy =
639 dev->rphy->identify.phy_identifier;
640 flag = 1; /* directly sata*/
642 } /*register this device to HBA*/
643 PM8001_DISC_DBG(pm8001_ha, pm8001_printk("Found device\n"));
644 PM8001_CHIP_DISP->reg_dev_req(pm8001_ha, pm8001_device, flag);
645 spin_unlock_irqrestore(&pm8001_ha->lock, flags);
646 wait_for_completion(&completion);
647 if (dev->dev_type == SAS_END_DEVICE)
648 msleep(50);
649 pm8001_ha->flags = PM8001F_RUN_TIME;
650 return 0;
651 found_out:
652 spin_unlock_irqrestore(&pm8001_ha->lock, flags);
653 return res;
656 int pm8001_dev_found(struct domain_device *dev)
658 return pm8001_dev_found_notify(dev);
661 void pm8001_task_done(struct sas_task *task)
663 if (!del_timer(&task->slow_task->timer))
664 return;
665 complete(&task->slow_task->completion);
668 static void pm8001_tmf_timedout(unsigned long data)
670 struct sas_task *task = (struct sas_task *)data;
672 task->task_state_flags |= SAS_TASK_STATE_ABORTED;
673 complete(&task->slow_task->completion);
676 #define PM8001_TASK_TIMEOUT 20
678 * pm8001_exec_internal_tmf_task - execute some task management commands.
679 * @dev: the wanted device.
680 * @tmf: which task management wanted to be take.
681 * @para_len: para_len.
682 * @parameter: ssp task parameter.
684 * when errors or exception happened, we may want to do something, for example
685 * abort the issued task which result in this execption, it is done by calling
686 * this function, note it is also with the task execute interface.
688 static int pm8001_exec_internal_tmf_task(struct domain_device *dev,
689 void *parameter, u32 para_len, struct pm8001_tmf_task *tmf)
691 int res, retry;
692 struct sas_task *task = NULL;
693 struct pm8001_hba_info *pm8001_ha = pm8001_find_ha_by_dev(dev);
694 struct pm8001_device *pm8001_dev = dev->lldd_dev;
695 DECLARE_COMPLETION_ONSTACK(completion_setstate);
697 for (retry = 0; retry < 3; retry++) {
698 task = sas_alloc_slow_task(GFP_KERNEL);
699 if (!task)
700 return -ENOMEM;
702 task->dev = dev;
703 task->task_proto = dev->tproto;
704 memcpy(&task->ssp_task, parameter, para_len);
705 task->task_done = pm8001_task_done;
706 task->slow_task->timer.data = (unsigned long)task;
707 task->slow_task->timer.function = pm8001_tmf_timedout;
708 task->slow_task->timer.expires = jiffies + PM8001_TASK_TIMEOUT*HZ;
709 add_timer(&task->slow_task->timer);
711 res = pm8001_task_exec(task, 1, GFP_KERNEL, 1, tmf);
713 if (res) {
714 del_timer(&task->slow_task->timer);
715 PM8001_FAIL_DBG(pm8001_ha,
716 pm8001_printk("Executing internal task "
717 "failed\n"));
718 goto ex_err;
720 wait_for_completion(&task->slow_task->completion);
721 if (pm8001_ha->chip_id != chip_8001) {
722 pm8001_dev->setds_completion = &completion_setstate;
723 PM8001_CHIP_DISP->set_dev_state_req(pm8001_ha,
724 pm8001_dev, 0x01);
725 wait_for_completion(&completion_setstate);
727 res = -TMF_RESP_FUNC_FAILED;
728 /* Even TMF timed out, return direct. */
729 if ((task->task_state_flags & SAS_TASK_STATE_ABORTED)) {
730 if (!(task->task_state_flags & SAS_TASK_STATE_DONE)) {
731 PM8001_FAIL_DBG(pm8001_ha,
732 pm8001_printk("TMF task[%x]timeout.\n",
733 tmf->tmf));
734 goto ex_err;
738 if (task->task_status.resp == SAS_TASK_COMPLETE &&
739 task->task_status.stat == SAM_STAT_GOOD) {
740 res = TMF_RESP_FUNC_COMPLETE;
741 break;
744 if (task->task_status.resp == SAS_TASK_COMPLETE &&
745 task->task_status.stat == SAS_DATA_UNDERRUN) {
746 /* no error, but return the number of bytes of
747 * underrun */
748 res = task->task_status.residual;
749 break;
752 if (task->task_status.resp == SAS_TASK_COMPLETE &&
753 task->task_status.stat == SAS_DATA_OVERRUN) {
754 PM8001_FAIL_DBG(pm8001_ha,
755 pm8001_printk("Blocked task error.\n"));
756 res = -EMSGSIZE;
757 break;
758 } else {
759 PM8001_EH_DBG(pm8001_ha,
760 pm8001_printk(" Task to dev %016llx response:"
761 "0x%x status 0x%x\n",
762 SAS_ADDR(dev->sas_addr),
763 task->task_status.resp,
764 task->task_status.stat));
765 sas_free_task(task);
766 task = NULL;
769 ex_err:
770 BUG_ON(retry == 3 && task != NULL);
771 sas_free_task(task);
772 return res;
775 static int
776 pm8001_exec_internal_task_abort(struct pm8001_hba_info *pm8001_ha,
777 struct pm8001_device *pm8001_dev, struct domain_device *dev, u32 flag,
778 u32 task_tag)
780 int res, retry;
781 u32 ccb_tag;
782 struct pm8001_ccb_info *ccb;
783 struct sas_task *task = NULL;
785 for (retry = 0; retry < 3; retry++) {
786 task = sas_alloc_slow_task(GFP_KERNEL);
787 if (!task)
788 return -ENOMEM;
790 task->dev = dev;
791 task->task_proto = dev->tproto;
792 task->task_done = pm8001_task_done;
793 task->slow_task->timer.data = (unsigned long)task;
794 task->slow_task->timer.function = pm8001_tmf_timedout;
795 task->slow_task->timer.expires = jiffies + PM8001_TASK_TIMEOUT * HZ;
796 add_timer(&task->slow_task->timer);
798 res = pm8001_tag_alloc(pm8001_ha, &ccb_tag);
799 if (res)
800 return res;
801 ccb = &pm8001_ha->ccb_info[ccb_tag];
802 ccb->device = pm8001_dev;
803 ccb->ccb_tag = ccb_tag;
804 ccb->task = task;
806 res = PM8001_CHIP_DISP->task_abort(pm8001_ha,
807 pm8001_dev, flag, task_tag, ccb_tag);
809 if (res) {
810 del_timer(&task->slow_task->timer);
811 PM8001_FAIL_DBG(pm8001_ha,
812 pm8001_printk("Executing internal task "
813 "failed\n"));
814 goto ex_err;
816 wait_for_completion(&task->slow_task->completion);
817 res = TMF_RESP_FUNC_FAILED;
818 /* Even TMF timed out, return direct. */
819 if ((task->task_state_flags & SAS_TASK_STATE_ABORTED)) {
820 if (!(task->task_state_flags & SAS_TASK_STATE_DONE)) {
821 PM8001_FAIL_DBG(pm8001_ha,
822 pm8001_printk("TMF task timeout.\n"));
823 goto ex_err;
827 if (task->task_status.resp == SAS_TASK_COMPLETE &&
828 task->task_status.stat == SAM_STAT_GOOD) {
829 res = TMF_RESP_FUNC_COMPLETE;
830 break;
832 } else {
833 PM8001_EH_DBG(pm8001_ha,
834 pm8001_printk(" Task to dev %016llx response: "
835 "0x%x status 0x%x\n",
836 SAS_ADDR(dev->sas_addr),
837 task->task_status.resp,
838 task->task_status.stat));
839 sas_free_task(task);
840 task = NULL;
843 ex_err:
844 BUG_ON(retry == 3 && task != NULL);
845 sas_free_task(task);
846 return res;
850 * pm8001_dev_gone_notify - see the comments for "pm8001_dev_found_notify"
851 * @dev: the device structure which sas layer used.
853 static void pm8001_dev_gone_notify(struct domain_device *dev)
855 unsigned long flags = 0;
856 struct pm8001_hba_info *pm8001_ha;
857 struct pm8001_device *pm8001_dev = dev->lldd_dev;
859 pm8001_ha = pm8001_find_ha_by_dev(dev);
860 spin_lock_irqsave(&pm8001_ha->lock, flags);
861 if (pm8001_dev) {
862 u32 device_id = pm8001_dev->device_id;
864 PM8001_DISC_DBG(pm8001_ha,
865 pm8001_printk("found dev[%d:%x] is gone.\n",
866 pm8001_dev->device_id, pm8001_dev->dev_type));
867 if (pm8001_dev->running_req) {
868 spin_unlock_irqrestore(&pm8001_ha->lock, flags);
869 pm8001_exec_internal_task_abort(pm8001_ha, pm8001_dev ,
870 dev, 1, 0);
871 spin_lock_irqsave(&pm8001_ha->lock, flags);
873 PM8001_CHIP_DISP->dereg_dev_req(pm8001_ha, device_id);
874 pm8001_free_dev(pm8001_dev);
875 } else {
876 PM8001_DISC_DBG(pm8001_ha,
877 pm8001_printk("Found dev has gone.\n"));
879 dev->lldd_dev = NULL;
880 spin_unlock_irqrestore(&pm8001_ha->lock, flags);
883 void pm8001_dev_gone(struct domain_device *dev)
885 pm8001_dev_gone_notify(dev);
888 static int pm8001_issue_ssp_tmf(struct domain_device *dev,
889 u8 *lun, struct pm8001_tmf_task *tmf)
891 struct sas_ssp_task ssp_task;
892 if (!(dev->tproto & SAS_PROTOCOL_SSP))
893 return TMF_RESP_FUNC_ESUPP;
895 strncpy((u8 *)&ssp_task.LUN, lun, 8);
896 return pm8001_exec_internal_tmf_task(dev, &ssp_task, sizeof(ssp_task),
897 tmf);
900 /* retry commands by ha, by task and/or by device */
901 void pm8001_open_reject_retry(
902 struct pm8001_hba_info *pm8001_ha,
903 struct sas_task *task_to_close,
904 struct pm8001_device *device_to_close)
906 int i;
907 unsigned long flags;
909 if (pm8001_ha == NULL)
910 return;
912 spin_lock_irqsave(&pm8001_ha->lock, flags);
914 for (i = 0; i < PM8001_MAX_CCB; i++) {
915 struct sas_task *task;
916 struct task_status_struct *ts;
917 struct pm8001_device *pm8001_dev;
918 unsigned long flags1;
919 u32 tag;
920 struct pm8001_ccb_info *ccb = &pm8001_ha->ccb_info[i];
922 pm8001_dev = ccb->device;
923 if (!pm8001_dev || (pm8001_dev->dev_type == SAS_PHY_UNUSED))
924 continue;
925 if (!device_to_close) {
926 uintptr_t d = (uintptr_t)pm8001_dev
927 - (uintptr_t)&pm8001_ha->devices;
928 if (((d % sizeof(*pm8001_dev)) != 0)
929 || ((d / sizeof(*pm8001_dev)) >= PM8001_MAX_DEVICES))
930 continue;
931 } else if (pm8001_dev != device_to_close)
932 continue;
933 tag = ccb->ccb_tag;
934 if (!tag || (tag == 0xFFFFFFFF))
935 continue;
936 task = ccb->task;
937 if (!task || !task->task_done)
938 continue;
939 if (task_to_close && (task != task_to_close))
940 continue;
941 ts = &task->task_status;
942 ts->resp = SAS_TASK_COMPLETE;
943 /* Force the midlayer to retry */
944 ts->stat = SAS_OPEN_REJECT;
945 ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
946 if (pm8001_dev)
947 pm8001_dev->running_req--;
948 spin_lock_irqsave(&task->task_state_lock, flags1);
949 task->task_state_flags &= ~SAS_TASK_STATE_PENDING;
950 task->task_state_flags &= ~SAS_TASK_AT_INITIATOR;
951 task->task_state_flags |= SAS_TASK_STATE_DONE;
952 if (unlikely((task->task_state_flags
953 & SAS_TASK_STATE_ABORTED))) {
954 spin_unlock_irqrestore(&task->task_state_lock,
955 flags1);
956 pm8001_ccb_task_free(pm8001_ha, task, ccb, tag);
957 } else {
958 spin_unlock_irqrestore(&task->task_state_lock,
959 flags1);
960 pm8001_ccb_task_free(pm8001_ha, task, ccb, tag);
961 mb();/* in order to force CPU ordering */
962 spin_unlock_irqrestore(&pm8001_ha->lock, flags);
963 task->task_done(task);
964 spin_lock_irqsave(&pm8001_ha->lock, flags);
968 spin_unlock_irqrestore(&pm8001_ha->lock, flags);
972 * Standard mandates link reset for ATA (type 0) and hard reset for
973 * SSP (type 1) , only for RECOVERY
975 int pm8001_I_T_nexus_reset(struct domain_device *dev)
977 int rc = TMF_RESP_FUNC_FAILED;
978 struct pm8001_device *pm8001_dev;
979 struct pm8001_hba_info *pm8001_ha;
980 struct sas_phy *phy;
982 if (!dev || !dev->lldd_dev)
983 return -ENODEV;
985 pm8001_dev = dev->lldd_dev;
986 pm8001_ha = pm8001_find_ha_by_dev(dev);
987 phy = sas_get_local_phy(dev);
989 if (dev_is_sata(dev)) {
990 DECLARE_COMPLETION_ONSTACK(completion_setstate);
991 if (scsi_is_sas_phy_local(phy)) {
992 rc = 0;
993 goto out;
995 rc = sas_phy_reset(phy, 1);
996 msleep(2000);
997 rc = pm8001_exec_internal_task_abort(pm8001_ha, pm8001_dev ,
998 dev, 1, 0);
999 pm8001_dev->setds_completion = &completion_setstate;
1000 rc = PM8001_CHIP_DISP->set_dev_state_req(pm8001_ha,
1001 pm8001_dev, 0x01);
1002 wait_for_completion(&completion_setstate);
1003 } else {
1004 rc = sas_phy_reset(phy, 1);
1005 msleep(2000);
1007 PM8001_EH_DBG(pm8001_ha, pm8001_printk(" for device[%x]:rc=%d\n",
1008 pm8001_dev->device_id, rc));
1009 out:
1010 sas_put_local_phy(phy);
1011 return rc;
1015 * This function handle the IT_NEXUS_XXX event or completion
1016 * status code for SSP/SATA/SMP I/O request.
1018 int pm8001_I_T_nexus_event_handler(struct domain_device *dev)
1020 int rc = TMF_RESP_FUNC_FAILED;
1021 struct pm8001_device *pm8001_dev;
1022 struct pm8001_hba_info *pm8001_ha;
1023 struct sas_phy *phy;
1024 u32 device_id = 0;
1026 if (!dev || !dev->lldd_dev)
1027 return -1;
1029 pm8001_dev = dev->lldd_dev;
1030 device_id = pm8001_dev->device_id;
1031 pm8001_ha = pm8001_find_ha_by_dev(dev);
1033 PM8001_EH_DBG(pm8001_ha,
1034 pm8001_printk("I_T_Nexus handler invoked !!"));
1036 phy = sas_get_local_phy(dev);
1038 if (dev_is_sata(dev)) {
1039 DECLARE_COMPLETION_ONSTACK(completion_setstate);
1040 if (scsi_is_sas_phy_local(phy)) {
1041 rc = 0;
1042 goto out;
1044 /* send internal ssp/sata/smp abort command to FW */
1045 rc = pm8001_exec_internal_task_abort(pm8001_ha, pm8001_dev ,
1046 dev, 1, 0);
1047 msleep(100);
1049 /* deregister the target device */
1050 pm8001_dev_gone_notify(dev);
1051 msleep(200);
1053 /*send phy reset to hard reset target */
1054 rc = sas_phy_reset(phy, 1);
1055 msleep(2000);
1056 pm8001_dev->setds_completion = &completion_setstate;
1058 wait_for_completion(&completion_setstate);
1059 } else {
1060 /* send internal ssp/sata/smp abort command to FW */
1061 rc = pm8001_exec_internal_task_abort(pm8001_ha, pm8001_dev ,
1062 dev, 1, 0);
1063 msleep(100);
1065 /* deregister the target device */
1066 pm8001_dev_gone_notify(dev);
1067 msleep(200);
1069 /*send phy reset to hard reset target */
1070 rc = sas_phy_reset(phy, 1);
1071 msleep(2000);
1073 PM8001_EH_DBG(pm8001_ha, pm8001_printk(" for device[%x]:rc=%d\n",
1074 pm8001_dev->device_id, rc));
1075 out:
1076 sas_put_local_phy(phy);
1078 return rc;
1080 /* mandatory SAM-3, the task reset the specified LUN*/
1081 int pm8001_lu_reset(struct domain_device *dev, u8 *lun)
1083 int rc = TMF_RESP_FUNC_FAILED;
1084 struct pm8001_tmf_task tmf_task;
1085 struct pm8001_device *pm8001_dev = dev->lldd_dev;
1086 struct pm8001_hba_info *pm8001_ha = pm8001_find_ha_by_dev(dev);
1087 DECLARE_COMPLETION_ONSTACK(completion_setstate);
1088 if (dev_is_sata(dev)) {
1089 struct sas_phy *phy = sas_get_local_phy(dev);
1090 rc = pm8001_exec_internal_task_abort(pm8001_ha, pm8001_dev ,
1091 dev, 1, 0);
1092 rc = sas_phy_reset(phy, 1);
1093 sas_put_local_phy(phy);
1094 pm8001_dev->setds_completion = &completion_setstate;
1095 rc = PM8001_CHIP_DISP->set_dev_state_req(pm8001_ha,
1096 pm8001_dev, 0x01);
1097 wait_for_completion(&completion_setstate);
1098 } else {
1099 tmf_task.tmf = TMF_LU_RESET;
1100 rc = pm8001_issue_ssp_tmf(dev, lun, &tmf_task);
1102 /* If failed, fall-through I_T_Nexus reset */
1103 PM8001_EH_DBG(pm8001_ha, pm8001_printk("for device[%x]:rc=%d\n",
1104 pm8001_dev->device_id, rc));
1105 return rc;
1108 /* optional SAM-3 */
1109 int pm8001_query_task(struct sas_task *task)
1111 u32 tag = 0xdeadbeef;
1112 int i = 0;
1113 struct scsi_lun lun;
1114 struct pm8001_tmf_task tmf_task;
1115 int rc = TMF_RESP_FUNC_FAILED;
1116 if (unlikely(!task || !task->lldd_task || !task->dev))
1117 return rc;
1119 if (task->task_proto & SAS_PROTOCOL_SSP) {
1120 struct scsi_cmnd *cmnd = task->uldd_task;
1121 struct domain_device *dev = task->dev;
1122 struct pm8001_hba_info *pm8001_ha =
1123 pm8001_find_ha_by_dev(dev);
1125 int_to_scsilun(cmnd->device->lun, &lun);
1126 rc = pm8001_find_tag(task, &tag);
1127 if (rc == 0) {
1128 rc = TMF_RESP_FUNC_FAILED;
1129 return rc;
1131 PM8001_EH_DBG(pm8001_ha, pm8001_printk("Query:["));
1132 for (i = 0; i < 16; i++)
1133 printk(KERN_INFO "%02x ", cmnd->cmnd[i]);
1134 printk(KERN_INFO "]\n");
1135 tmf_task.tmf = TMF_QUERY_TASK;
1136 tmf_task.tag_of_task_to_be_managed = tag;
1138 rc = pm8001_issue_ssp_tmf(dev, lun.scsi_lun, &tmf_task);
1139 switch (rc) {
1140 /* The task is still in Lun, release it then */
1141 case TMF_RESP_FUNC_SUCC:
1142 PM8001_EH_DBG(pm8001_ha,
1143 pm8001_printk("The task is still in Lun\n"));
1144 break;
1145 /* The task is not in Lun or failed, reset the phy */
1146 case TMF_RESP_FUNC_FAILED:
1147 case TMF_RESP_FUNC_COMPLETE:
1148 PM8001_EH_DBG(pm8001_ha,
1149 pm8001_printk("The task is not in Lun or failed,"
1150 " reset the phy\n"));
1151 break;
1154 pm8001_printk(":rc= %d\n", rc);
1155 return rc;
1158 /* mandatory SAM-3, still need free task/ccb info, abord the specified task */
1159 int pm8001_abort_task(struct sas_task *task)
1161 unsigned long flags;
1162 u32 tag = 0xdeadbeef;
1163 u32 device_id;
1164 struct domain_device *dev ;
1165 struct pm8001_hba_info *pm8001_ha = NULL;
1166 struct pm8001_ccb_info *ccb;
1167 struct scsi_lun lun;
1168 struct pm8001_device *pm8001_dev;
1169 struct pm8001_tmf_task tmf_task;
1170 int rc = TMF_RESP_FUNC_FAILED;
1171 if (unlikely(!task || !task->lldd_task || !task->dev))
1172 return rc;
1173 spin_lock_irqsave(&task->task_state_lock, flags);
1174 if (task->task_state_flags & SAS_TASK_STATE_DONE) {
1175 spin_unlock_irqrestore(&task->task_state_lock, flags);
1176 rc = TMF_RESP_FUNC_COMPLETE;
1177 goto out;
1179 spin_unlock_irqrestore(&task->task_state_lock, flags);
1180 if (task->task_proto & SAS_PROTOCOL_SSP) {
1181 struct scsi_cmnd *cmnd = task->uldd_task;
1182 dev = task->dev;
1183 ccb = task->lldd_task;
1184 pm8001_dev = dev->lldd_dev;
1185 pm8001_ha = pm8001_find_ha_by_dev(dev);
1186 int_to_scsilun(cmnd->device->lun, &lun);
1187 rc = pm8001_find_tag(task, &tag);
1188 if (rc == 0) {
1189 printk(KERN_INFO "No such tag in %s\n", __func__);
1190 rc = TMF_RESP_FUNC_FAILED;
1191 return rc;
1193 device_id = pm8001_dev->device_id;
1194 PM8001_EH_DBG(pm8001_ha,
1195 pm8001_printk("abort io to deviceid= %d\n", device_id));
1196 tmf_task.tmf = TMF_ABORT_TASK;
1197 tmf_task.tag_of_task_to_be_managed = tag;
1198 rc = pm8001_issue_ssp_tmf(dev, lun.scsi_lun, &tmf_task);
1199 pm8001_exec_internal_task_abort(pm8001_ha, pm8001_dev,
1200 pm8001_dev->sas_device, 0, tag);
1201 } else if (task->task_proto & SAS_PROTOCOL_SATA ||
1202 task->task_proto & SAS_PROTOCOL_STP) {
1203 dev = task->dev;
1204 pm8001_dev = dev->lldd_dev;
1205 pm8001_ha = pm8001_find_ha_by_dev(dev);
1206 rc = pm8001_find_tag(task, &tag);
1207 if (rc == 0) {
1208 printk(KERN_INFO "No such tag in %s\n", __func__);
1209 rc = TMF_RESP_FUNC_FAILED;
1210 return rc;
1212 rc = pm8001_exec_internal_task_abort(pm8001_ha, pm8001_dev,
1213 pm8001_dev->sas_device, 0, tag);
1214 } else if (task->task_proto & SAS_PROTOCOL_SMP) {
1215 /* SMP */
1216 dev = task->dev;
1217 pm8001_dev = dev->lldd_dev;
1218 pm8001_ha = pm8001_find_ha_by_dev(dev);
1219 rc = pm8001_find_tag(task, &tag);
1220 if (rc == 0) {
1221 printk(KERN_INFO "No such tag in %s\n", __func__);
1222 rc = TMF_RESP_FUNC_FAILED;
1223 return rc;
1225 rc = pm8001_exec_internal_task_abort(pm8001_ha, pm8001_dev,
1226 pm8001_dev->sas_device, 0, tag);
1229 out:
1230 if (rc != TMF_RESP_FUNC_COMPLETE)
1231 pm8001_printk("rc= %d\n", rc);
1232 return rc;
1235 int pm8001_abort_task_set(struct domain_device *dev, u8 *lun)
1237 int rc = TMF_RESP_FUNC_FAILED;
1238 struct pm8001_tmf_task tmf_task;
1240 tmf_task.tmf = TMF_ABORT_TASK_SET;
1241 rc = pm8001_issue_ssp_tmf(dev, lun, &tmf_task);
1242 return rc;
1245 int pm8001_clear_aca(struct domain_device *dev, u8 *lun)
1247 int rc = TMF_RESP_FUNC_FAILED;
1248 struct pm8001_tmf_task tmf_task;
1250 tmf_task.tmf = TMF_CLEAR_ACA;
1251 rc = pm8001_issue_ssp_tmf(dev, lun, &tmf_task);
1253 return rc;
1256 int pm8001_clear_task_set(struct domain_device *dev, u8 *lun)
1258 int rc = TMF_RESP_FUNC_FAILED;
1259 struct pm8001_tmf_task tmf_task;
1260 struct pm8001_device *pm8001_dev = dev->lldd_dev;
1261 struct pm8001_hba_info *pm8001_ha = pm8001_find_ha_by_dev(dev);
1263 PM8001_EH_DBG(pm8001_ha,
1264 pm8001_printk("I_T_L_Q clear task set[%x]\n",
1265 pm8001_dev->device_id));
1266 tmf_task.tmf = TMF_CLEAR_TASK_SET;
1267 rc = pm8001_issue_ssp_tmf(dev, lun, &tmf_task);
1268 return rc;