Makefile

   1 VERSION = 3
   2 PATCHLEVEL = 2
   3 SUBLEVEL = 64
   4 EXTRAVERSION =
   5 NAME = Saber-toothed Squirrel
   6
   7 # *DOCUMENTATION*
   8 # To see a list of typical targets execute "make help"
   9 # More info can be located in ./README
  10 # Comments in this file are targeted only to the developer, do not
  11 # expect to learn how to build the kernel reading this file.
  12
  13 # Do not:
  14 # o  use make's built-in rules and variables
  15 #    (this increases performance and avoids hard-to-debug behaviour);
  16 # o  print "Entering directory ...";
  17 MAKEFLAGS += -rR --no-print-directory
  18
  19 # Avoid funny character set dependencies
  20 unexport LC_ALL
  21 LC_COLLATE=C
  22 LC_NUMERIC=C
  23 export LC_COLLATE LC_NUMERIC
  24
  25 # We are using a recursive build, so we need to do a little thinking
  26 # to get the ordering right.
  27 #
  28 # Most importantly: sub-Makefiles should only ever modify files in
  29 # their own directory. If in some directory we have a dependency on
  30 # a file in another dir (which doesn't happen often, but it's often
  31 # unavoidable when linking the built-in.o targets which finally
  32 # turn into vmlinux), we will call a sub make in that other dir, and
  33 # after that we are sure that everything which is in that other dir
  34 # is now up to date.
  35 #
  36 # The only cases where we need to modify files which have global
  37 # effects are thus separated out and done before the recursive
  38 # descending is started. They are now explicitly listed as the
  39 # prepare rule.
  40
  41 # To put more focus on warnings, be less verbose as default
  42 # Use 'make V=1' to see the full commands
  43
  44 ifeq ("$(origin V)", "command line")
  45   KBUILD_VERBOSE = $(V)
  46 endif
  47 ifndef KBUILD_VERBOSE
  48   KBUILD_VERBOSE = 0
  49 endif
  50
  51 # Call a source code checker (by default, "sparse") as part of the
  52 # C compilation.
  53 #
  54 # Use 'make C=1' to enable checking of only re-compiled files.
  55 # Use 'make C=2' to enable checking of *all* source files, regardless
  56 # of whether they are re-compiled or not.
  57 #
  58 # See the file "Documentation/sparse.txt" for more details, including
  59 # where to get the "sparse" utility.
  60
  61 ifeq ("$(origin C)", "command line")
  62   KBUILD_CHECKSRC = $(C)
  63 endif
  64 ifndef KBUILD_CHECKSRC
  65   KBUILD_CHECKSRC = 0
  66 endif
  67
  68 # Use make M=dir to specify directory of external module to build
  69 # Old syntax make ... SUBDIRS=$PWD is still supported
  70 # Setting the environment variable KBUILD_EXTMOD take precedence
  71 ifdef SUBDIRS
  72   KBUILD_EXTMOD ?= $(SUBDIRS)
  73 endif
  74
  75 ifeq ("$(origin M)", "command line")
  76   KBUILD_EXTMOD := $(M)
  77 endif
  78
  79 # kbuild supports saving output files in a separate directory.
  80 # To locate output files in a separate directory two syntaxes are supported.
  81 # In both cases the working directory must be the root of the kernel src.
  82 # 1) O=
  83 # Use "make O=dir/to/store/output/files/"
  84 #
  85 # 2) Set KBUILD_OUTPUT
  86 # Set the environment variable KBUILD_OUTPUT to point to the directory
  87 # where the output files shall be placed.
  88 # export KBUILD_OUTPUT=dir/to/store/output/files/
  89 # make
  90 #
  91 # The O= assignment takes precedence over the KBUILD_OUTPUT environment
  92 # variable.
  93
  94
  95 # KBUILD_SRC is set on invocation of make in OBJ directory
  96 # KBUILD_SRC is not intended to be used by the regular user (for now)
  97 ifeq ($(KBUILD_SRC),)
  98
  99 # OK, Make called in directory where kernel src resides
 100 # Do we want to locate output files in a separate directory?
 101 ifeq ("$(origin O)", "command line")
 102   KBUILD_OUTPUT := $(O)
 103 endif
 104
 105 ifeq ("$(origin W)", "command line")
 106   export KBUILD_ENABLE_EXTRA_GCC_CHECKS := $(W)
 107 endif
 108
 109 # That's our default target when none is given on the command line
 110 PHONY := _all
 111 _all:
 112
 113 # Cancel implicit rules on top Makefile
 114 $(CURDIR)/Makefile Makefile: ;
 115
 116 ifneq ($(KBUILD_OUTPUT),)
 117 # Invoke a second make in the output directory, passing relevant variables
 118 # check that the output directory actually exists
 119 saved-output := $(KBUILD_OUTPUT)
 120 KBUILD_OUTPUT := $(shell cd $(KBUILD_OUTPUT) && /bin/pwd)
 121 $(if $(KBUILD_OUTPUT),, \
 122      $(error output directory "$(saved-output)" does not exist))
 123
 124 PHONY += $(MAKECMDGOALS) sub-make
 125
 126 $(filter-out _all sub-make $(CURDIR)/Makefile, $(MAKECMDGOALS)) _all: sub-make
 127         $(Q)@:
 128
 129 sub-make: FORCE
 130         $(if $(KBUILD_VERBOSE:1=),@)$(MAKE) -C $(KBUILD_OUTPUT) \
 131         KBUILD_SRC=$(CURDIR) \
 132         KBUILD_EXTMOD="$(KBUILD_EXTMOD)" -f $(CURDIR)/Makefile \
 133         $(filter-out _all sub-make,$(MAKECMDGOALS))
 134
 135 # Leave processing to above invocation of make
 136 skip-makefile := 1
 137 endif # ifneq ($(KBUILD_OUTPUT),)
 138 endif # ifeq ($(KBUILD_SRC),)
 139
 140 # We process the rest of the Makefile if this is the final invocation of make
 141 ifeq ($(skip-makefile),)
 142
 143 # If building an external module we do not care about the all: rule
 144 # but instead _all depend on modules
 145 PHONY += all
 146 ifeq ($(KBUILD_EXTMOD),)
 147 _all: all
 148 else
 149 _all: modules
 150 endif
 151
 152 srctree         := $(if $(KBUILD_SRC),$(KBUILD_SRC),$(CURDIR))
 153 objtree         := $(CURDIR)
 154 src             := $(srctree)
 155 obj             := $(objtree)
 156
 157 VPATH           := $(srctree)$(if $(KBUILD_EXTMOD),:$(KBUILD_EXTMOD))
 158
 159 export srctree objtree VPATH
 160
 161
 162 # SUBARCH tells the usermode build what the underlying arch is.  That is set
 163 # first, and if a usermode build is happening, the "ARCH=um" on the command
 164 # line overrides the setting of ARCH below.  If a native build is happening,
 165 # then ARCH is assigned, getting whatever value it gets normally, and
 166 # SUBARCH is subsequently ignored.
 167
 168 SUBARCH := $(shell uname -m | sed -e s/i.86/i386/ -e s/sun4u/sparc64/ \
 169                                   -e s/arm.*/arm/ -e s/sa110/arm/ \
 170                                   -e s/s390x/s390/ -e s/parisc64/parisc/ \
 171                                   -e s/ppc.*/powerpc/ -e s/mips.*/mips/ \
 172                                   -e s/sh[234].*/sh/ )
 173
 174 # Cross compiling and selecting different set of gcc/bin-utils
 175 # ---------------------------------------------------------------------------
 176 #
 177 # When performing cross compilation for other architectures ARCH shall be set
 178 # to the target architecture. (See arch/* for the possibilities).
 179 # ARCH can be set during invocation of make:
 180 # make ARCH=ia64
 181 # Another way is to have ARCH set in the environment.
 182 # The default ARCH is the host where make is executed.
 183
 184 # CROSS_COMPILE specify the prefix used for all executables used
 185 # during compilation. Only gcc and related bin-utils executables
 186 # are prefixed with $(CROSS_COMPILE).
 187 # CROSS_COMPILE can be set on the command line
 188 # make CROSS_COMPILE=ia64-linux-
 189 # Alternatively CROSS_COMPILE can be set in the environment.
 190 # A third alternative is to store a setting in .config so that plain
 191 # "make" in the configured kernel build directory always uses that.
 192 # Default value for CROSS_COMPILE is not to prefix executables
 193 # Note: Some architectures assign CROSS_COMPILE in their arch/*/Makefile
 194 export KBUILD_BUILDHOST := $(SUBARCH)
 195 ARCH            ?= $(SUBARCH)
 196 CROSS_COMPILE   ?= $(CONFIG_CROSS_COMPILE:"%"=%)
 197
 198 # Architecture as present in compile.h
 199 UTS_MACHINE     := $(ARCH)
 200 SRCARCH         := $(ARCH)
 201
 202 # Additional ARCH settings for x86
 203 ifeq ($(ARCH),i386)
 204         SRCARCH := x86
 205 endif
 206 ifeq ($(ARCH),x86_64)
 207         SRCARCH := x86
 208 endif
 209
 210 # Additional ARCH settings for sparc
 211 ifeq ($(ARCH),sparc32)
 212        SRCARCH := sparc
 213 endif
 214 ifeq ($(ARCH),sparc64)
 215        SRCARCH := sparc
 216 endif
 217
 218 # Additional ARCH settings for sh
 219 ifeq ($(ARCH),sh64)
 220        SRCARCH := sh
 221 endif
 222
 223 # Additional ARCH settings for tile
 224 ifeq ($(ARCH),tilepro)
 225        SRCARCH := tile
 226 endif
 227 ifeq ($(ARCH),tilegx)
 228        SRCARCH := tile
 229 endif
 230
 231 # Where to locate arch specific headers
 232 hdr-arch  := $(SRCARCH)
 233
 234 ifeq ($(ARCH),m68knommu)
 235        hdr-arch  := m68k
 236 endif
 237
 238 KCONFIG_CONFIG  ?= .config
 239 export KCONFIG_CONFIG
 240
 241 # SHELL used by kbuild
 242 CONFIG_SHELL := $(shell if [ -x "$$BASH" ]; then echo $$BASH; \
 243           else if [ -x /bin/bash ]; then echo /bin/bash; \
 244           else echo sh; fi ; fi)
 245
 246 HOSTCC       = gcc
 247 HOSTCXX      = g++
 248 HOSTCFLAGS   = -Wall -Wmissing-prototypes -Wstrict-prototypes -O2 -fomit-frame-pointer
 249 HOSTCXXFLAGS = -O2
 250
 251 # Decide whether to build built-in, modular, or both.
 252 # Normally, just do built-in.
 253
 254 KBUILD_MODULES :=
 255 KBUILD_BUILTIN := 1
 256
 257 #       If we have only "make modules", don't compile built-in objects.
 258 #       When we're building modules with modversions, we need to consider
 259 #       the built-in objects during the descend as well, in order to
 260 #       make sure the checksums are up to date before we record them.
 261
 262 ifeq ($(MAKECMDGOALS),modules)
 263   KBUILD_BUILTIN := $(if $(CONFIG_MODVERSIONS),1)
 264 endif
 265
 266 #       If we have "make <whatever> modules", compile modules
 267 #       in addition to whatever we do anyway.
 268 #       Just "make" or "make all" shall build modules as well
 269
 270 ifneq ($(filter all _all modules,$(MAKECMDGOALS)),)
 271   KBUILD_MODULES := 1
 272 endif
 273
 274 ifeq ($(MAKECMDGOALS),)
 275   KBUILD_MODULES := 1
 276 endif
 277
 278 export KBUILD_MODULES KBUILD_BUILTIN
 279 export KBUILD_CHECKSRC KBUILD_SRC KBUILD_EXTMOD
 280
 281 # Beautify output
 282 # ---------------------------------------------------------------------------
 283 #
 284 # Normally, we echo the whole command before executing it. By making
 285 # that echo $($(quiet)$(cmd)), we now have the possibility to set
 286 # $(quiet) to choose other forms of output instead, e.g.
 287 #
 288 #         quiet_cmd_cc_o_c = Compiling $(RELDIR)/$@
 289 #         cmd_cc_o_c       = $(CC) $(c_flags) -c -o $@ $<
 290 #
 291 # If $(quiet) is empty, the whole command will be printed.
 292 # If it is set to "quiet_", only the short version will be printed.
 293 # If it is set to "silent_", nothing will be printed at all, since
 294 # the variable $(silent_cmd_cc_o_c) doesn't exist.
 295 #
 296 # A simple variant is to prefix commands with $(Q) - that's useful
 297 # for commands that shall be hidden in non-verbose mode.
 298 #
 299 #       $(Q)ln $@ :<
 300 #
 301 # If KBUILD_VERBOSE equals 0 then the above command will be hidden.
 302 # If KBUILD_VERBOSE equals 1 then the above command is displayed.
 303
 304 ifeq ($(KBUILD_VERBOSE),1)
 305   quiet =
 306   Q =
 307 else
 308   quiet=quiet_
 309   Q = @
 310 endif
 311
 312 # If the user is running make -s (silent mode), suppress echoing of
 313 # commands
 314
 315 ifneq ($(findstring s,$(MAKEFLAGS)),)
 316   quiet=silent_
 317 endif
 318
 319 export quiet Q KBUILD_VERBOSE
 320
 321
 322 # Look for make include files relative to root of kernel src
 323 MAKEFLAGS += --include-dir=$(srctree)
 324
 325 # We need some generic definitions (do not try to remake the file).
 326 $(srctree)/scripts/Kbuild.include: ;
 327 include $(srctree)/scripts/Kbuild.include
 328
 329 # Make variables (CC, etc...)
 330
 331 AS              = $(CROSS_COMPILE)as
 332 LD              = $(CROSS_COMPILE)ld
 333 CC              = $(CROSS_COMPILE)gcc
 334 CPP             = $(CC) -E
 335 AR              = $(CROSS_COMPILE)ar
 336 NM              = $(CROSS_COMPILE)nm
 337 STRIP           = $(CROSS_COMPILE)strip
 338 OBJCOPY         = $(CROSS_COMPILE)objcopy
 339 OBJDUMP         = $(CROSS_COMPILE)objdump
 340 AWK             = awk
 341 GENKSYMS        = scripts/genksyms/genksyms
 342 INSTALLKERNEL  := installkernel
 343 DEPMOD          = /sbin/depmod
 344 KALLSYMS        = scripts/kallsyms
 345 PERL            = perl
 346 CHECK           = sparse
 347
 348 CHECKFLAGS     := -D__linux__ -Dlinux -D__STDC__ -Dunix -D__unix__ \
 349                   -Wbitwise -Wno-return-void $(CF)
 350 CFLAGS_MODULE   =
 351 AFLAGS_MODULE   =
 352 LDFLAGS_MODULE  =
 353 CFLAGS_KERNEL   =
 354 AFLAGS_KERNEL   =
 355 CFLAGS_GCOV     = -fprofile-arcs -ftest-coverage
 356
 357
 358 # Use LINUXINCLUDE when you must reference the include/ directory.
 359 # Needed to be compatible with the O= option
 360 LINUXINCLUDE    := -I$(srctree)/arch/$(hdr-arch)/include \
 361                    -Iarch/$(hdr-arch)/include/generated -Iinclude \
 362                    $(if $(KBUILD_SRC), -I$(srctree)/include) \
 363                    -include $(srctree)/include/linux/kconfig.h
 364
 365 KBUILD_CPPFLAGS := -D__KERNEL__
 366
 367 KBUILD_CFLAGS   := -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs \
 368                    -fno-strict-aliasing -fno-common \
 369                    -Werror-implicit-function-declaration \
 370                    -Wno-format-security \
 371                    -fno-delete-null-pointer-checks
 372 KBUILD_AFLAGS_KERNEL :=
 373 KBUILD_CFLAGS_KERNEL :=
 374 KBUILD_AFLAGS   := -D__ASSEMBLY__
 375 KBUILD_AFLAGS_MODULE  := -DMODULE
 376 KBUILD_CFLAGS_MODULE  := -DMODULE
 377 KBUILD_LDFLAGS_MODULE := -T $(srctree)/scripts/module-common.lds
 378
 379 # Read KERNELRELEASE from include/config/kernel.release (if it exists)
 380 KERNELRELEASE = $(shell cat include/config/kernel.release 2> /dev/null)
 381 KERNELVERSION = $(VERSION)$(if $(PATCHLEVEL),.$(PATCHLEVEL)$(if $(SUBLEVEL),.$(SUBLEVEL)))$(EXTRAVERSION)
 382
 383 export VERSION PATCHLEVEL SUBLEVEL KERNELRELEASE KERNELVERSION
 384 export ARCH SRCARCH CONFIG_SHELL HOSTCC HOSTCFLAGS CROSS_COMPILE AS LD CC
 385 export CPP AR NM STRIP OBJCOPY OBJDUMP
 386 export MAKE AWK GENKSYMS INSTALLKERNEL PERL UTS_MACHINE
 387 export HOSTCXX HOSTCXXFLAGS LDFLAGS_MODULE CHECK CHECKFLAGS
 388
 389 export KBUILD_CPPFLAGS NOSTDINC_FLAGS LINUXINCLUDE OBJCOPYFLAGS LDFLAGS
 390 export KBUILD_CFLAGS CFLAGS_KERNEL CFLAGS_MODULE CFLAGS_GCOV
 391 export KBUILD_AFLAGS AFLAGS_KERNEL AFLAGS_MODULE
 392 export KBUILD_AFLAGS_MODULE KBUILD_CFLAGS_MODULE KBUILD_LDFLAGS_MODULE
 393 export KBUILD_AFLAGS_KERNEL KBUILD_CFLAGS_KERNEL
 394 export KBUILD_ARFLAGS
 395
 396 # When compiling out-of-tree modules, put MODVERDIR in the module
 397 # tree rather than in the kernel tree. The kernel tree might
 398 # even be read-only.
 399 export MODVERDIR := $(if $(KBUILD_EXTMOD),$(firstword $(KBUILD_EXTMOD))/).tmp_versions
 400
 401 # Files to ignore in find ... statements
 402
 403 RCS_FIND_IGNORE := \( -name SCCS -o -name BitKeeper -o -name .svn -o -name CVS -o -name .pc -o -name .hg -o -name .git \) -prune -o
 404 export RCS_TAR_IGNORE := --exclude SCCS --exclude BitKeeper --exclude .svn --exclude CVS --exclude .pc --exclude .hg --exclude .git
 405
 406 # ===========================================================================
 407 # Rules shared between *config targets and build targets
 408
 409 # Basic helpers built in scripts/
 410 PHONY += scripts_basic
 411 scripts_basic:
 412         $(Q)$(MAKE) $(build)=scripts/basic
 413         $(Q)rm -f .tmp_quiet_recordmcount
 414
 415 # To avoid any implicit rule to kick in, define an empty command.
 416 scripts/basic/%: scripts_basic ;
 417
 418 PHONY += outputmakefile
 419 # outputmakefile generates a Makefile in the output directory, if using a
 420 # separate output directory. This allows convenient use of make in the
 421 # output directory.
 422 outputmakefile:
 423 ifneq ($(KBUILD_SRC),)
 424         $(Q)ln -fsn $(srctree) source
 425         $(Q)$(CONFIG_SHELL) $(srctree)/scripts/mkmakefile \
 426             $(srctree) $(objtree) $(VERSION) $(PATCHLEVEL)
 427 endif
 428
 429 # Support for using generic headers in asm-generic
 430 PHONY += asm-generic
 431 asm-generic:
 432         $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.asm-generic \
 433                     obj=arch/$(SRCARCH)/include/generated/asm
 434
 435 # To make sure we do not include .config for any of the *config targets
 436 # catch them early, and hand them over to scripts/kconfig/Makefile
 437 # It is allowed to specify more targets when calling make, including
 438 # mixing *config targets and build targets.
 439 # For example 'make oldconfig all'.
 440 # Detect when mixed targets is specified, and make a second invocation
 441 # of make so .config is not included in this case either (for *config).
 442
 443 no-dot-config-targets := clean mrproper distclean \
 444                          cscope gtags TAGS tags help %docs check% coccicheck \
 445                          include/linux/version.h headers_% archscripts \
 446                          kernelversion %src-pkg
 447
 448 config-targets := 0
 449 mixed-targets  := 0
 450 dot-config     := 1
 451
 452 ifneq ($(filter $(no-dot-config-targets), $(MAKECMDGOALS)),)
 453         ifeq ($(filter-out $(no-dot-config-targets), $(MAKECMDGOALS)),)
 454                 dot-config := 0
 455         endif
 456 endif
 457
 458 ifeq ($(KBUILD_EXTMOD),)
 459         ifneq ($(filter config %config,$(MAKECMDGOALS)),)
 460                 config-targets := 1
 461                 ifneq ($(filter-out config %config,$(MAKECMDGOALS)),)
 462                         mixed-targets := 1
 463                 endif
 464         endif
 465 endif
 466
 467 ifeq ($(mixed-targets),1)
 468 # ===========================================================================
 469 # We're called with mixed targets (*config and build targets).
 470 # Handle them one by one.
 471
 472 %:: FORCE
 473         $(Q)$(MAKE) -C $(srctree) KBUILD_SRC= $@
 474
 475 else
 476 ifeq ($(config-targets),1)
 477 # ===========================================================================
 478 # *config targets only - make sure prerequisites are updated, and descend
 479 # in scripts/kconfig to make the *config target
 480
 481 # Read arch specific Makefile to set KBUILD_DEFCONFIG as needed.
 482 # KBUILD_DEFCONFIG may point out an alternative default configuration
 483 # used for 'make defconfig'
 484 include $(srctree)/arch/$(SRCARCH)/Makefile
 485 export KBUILD_DEFCONFIG KBUILD_KCONFIG
 486
 487 config: scripts_basic outputmakefile FORCE
 488         $(Q)mkdir -p include/linux include/config
 489         $(Q)$(MAKE) $(build)=scripts/kconfig $@
 490
 491 %config: scripts_basic outputmakefile FORCE
 492         $(Q)mkdir -p include/linux include/config
 493         $(Q)$(MAKE) $(build)=scripts/kconfig $@
 494
 495 else
 496 # ===========================================================================
 497 # Build targets only - this includes vmlinux, arch specific targets, clean
 498 # targets and others. In general all targets except *config targets.
 499
 500 ifeq ($(KBUILD_EXTMOD),)
 501 # Additional helpers built in scripts/
 502 # Carefully list dependencies so we do not try to build scripts twice
 503 # in parallel
 504 PHONY += scripts
 505 scripts: scripts_basic include/config/auto.conf include/config/tristate.conf
 506         $(Q)$(MAKE) $(build)=$(@)
 507
 508 # Objects we will link into vmlinux / subdirs we need to visit
 509 init-y          := init/
 510 drivers-y       := drivers/ sound/ firmware/
 511 net-y           := net/
 512 libs-y          := lib/
 513 core-y          := usr/
 514 endif # KBUILD_EXTMOD
 515
 516 ifeq ($(dot-config),1)
 517 # Read in config
 518 -include include/config/auto.conf
 519
 520 ifeq ($(KBUILD_EXTMOD),)
 521 # Read in dependencies to all Kconfig* files, make sure to run
 522 # oldconfig if changes are detected.
 523 -include include/config/auto.conf.cmd
 524
 525 # To avoid any implicit rule to kick in, define an empty command
 526 $(KCONFIG_CONFIG) include/config/auto.conf.cmd: ;
 527
 528 # If .config is newer than include/config/auto.conf, someone tinkered
 529 # with it and forgot to run make oldconfig.
 530 # if auto.conf.cmd is missing then we are probably in a cleaned tree so
 531 # we execute the config step to be sure to catch updated Kconfig files
 532 include/config/%.conf: $(KCONFIG_CONFIG) include/config/auto.conf.cmd
 533         $(Q)$(MAKE) -f $(srctree)/Makefile silentoldconfig
 534 else
 535 # external modules needs include/generated/autoconf.h and include/config/auto.conf
 536 # but do not care if they are up-to-date. Use auto.conf to trigger the test
 537 PHONY += include/config/auto.conf
 538
 539 include/config/auto.conf:
 540         $(Q)test -e include/generated/autoconf.h -a -e $@ || (          \
 541         echo;                                                           \
 542         echo "  ERROR: Kernel configuration is invalid.";               \
 543         echo "         include/generated/autoconf.h or $@ are missing.";\
 544         echo "         Run 'make oldconfig && make prepare' on kernel src to fix it.";  \
 545         echo;                                                           \
 546         /bin/false)
 547
 548 endif # KBUILD_EXTMOD
 549
 550 else
 551 # Dummy target needed, because used as prerequisite
 552 include/config/auto.conf: ;
 553 endif # $(dot-config)
 554
 555 # The all: target is the default when no target is given on the
 556 # command line.
 557 # This allow a user to issue only 'make' to build a kernel including modules
 558 # Defaults to vmlinux, but the arch makefile usually adds further targets
 559 all: vmlinux
 560
 561 ifdef CONFIG_CC_OPTIMIZE_FOR_SIZE
 562 KBUILD_CFLAGS   += -Os
 563 else
 564 KBUILD_CFLAGS   += -O2
 565 endif
 566
 567 include $(srctree)/arch/$(SRCARCH)/Makefile
 568
 569 ifneq ($(CONFIG_FRAME_WARN),0)
 570 KBUILD_CFLAGS += $(call cc-option,-Wframe-larger-than=${CONFIG_FRAME_WARN})
 571 endif
 572
 573 # Force gcc to behave correct even for buggy distributions
 574 ifndef CONFIG_CC_STACKPROTECTOR
 575 KBUILD_CFLAGS += $(call cc-option, -fno-stack-protector)
 576 endif
 577
 578 # This warning generated too much noise in a regular build.
 579 # Use make W=1 to enable this warning (see scripts/Makefile.build)
 580 KBUILD_CFLAGS += $(call cc-disable-warning, unused-but-set-variable)
 581
 582 ifdef CONFIG_FRAME_POINTER
 583 KBUILD_CFLAGS   += -fno-omit-frame-pointer -fno-optimize-sibling-calls
 584 else
 585 # Some targets (ARM with Thumb2, for example), can't be built with frame
 586 # pointers.  For those, we don't have FUNCTION_TRACER automatically
 587 # select FRAME_POINTER.  However, FUNCTION_TRACER adds -pg, and this is
 588 # incompatible with -fomit-frame-pointer with current GCC, so we don't use
 589 # -fomit-frame-pointer with FUNCTION_TRACER.
 590 ifndef CONFIG_FUNCTION_TRACER
 591 KBUILD_CFLAGS   += -fomit-frame-pointer
 592 endif
 593 endif
 594
 595 KBUILD_CFLAGS   += $(call cc-option, -fno-var-tracking-assignments)
 596
 597 ifdef CONFIG_DEBUG_INFO
 598 KBUILD_CFLAGS   += -g
 599 KBUILD_AFLAGS   += -gdwarf-2
 600 endif
 601
 602 ifdef CONFIG_DEBUG_INFO_REDUCED
 603 KBUILD_CFLAGS   += $(call cc-option, -femit-struct-debug-baseonly)
 604 endif
 605
 606 ifdef CONFIG_FUNCTION_TRACER
 607 KBUILD_CFLAGS   += -pg
 608 ifdef CONFIG_DYNAMIC_FTRACE
 609         ifdef CONFIG_HAVE_C_RECORDMCOUNT
 610                 BUILD_C_RECORDMCOUNT := y
 611                 export BUILD_C_RECORDMCOUNT
 612         endif
 613 endif
 614 endif
 615
 616 # We trigger additional mismatches with less inlining
 617 ifdef CONFIG_DEBUG_SECTION_MISMATCH
 618 KBUILD_CFLAGS += $(call cc-option, -fno-inline-functions-called-once)
 619 endif
 620
 621 # arch Makefile may override CC so keep this after arch Makefile is included
 622 NOSTDINC_FLAGS += -nostdinc -isystem $(shell $(CC) -print-file-name=include)
 623 CHECKFLAGS     += $(NOSTDINC_FLAGS)
 624
 625 # warn about C99 declaration after statement
 626 KBUILD_CFLAGS += $(call cc-option,-Wdeclaration-after-statement,)
 627
 628 # disable pointer signed / unsigned warnings in gcc 4.0
 629 KBUILD_CFLAGS += $(call cc-disable-warning, pointer-sign)
 630
 631 # disable invalid "can't wrap" optimizations for signed / pointers
 632 KBUILD_CFLAGS   += $(call cc-option,-fno-strict-overflow)
 633
 634 # conserve stack if available
 635 KBUILD_CFLAGS   += $(call cc-option,-fconserve-stack)
 636
 637 # use the deterministic mode of AR if available
 638 KBUILD_ARFLAGS := $(call ar-option,D)
 639
 640 # check for 'asm goto'
 641 ifeq ($(shell $(CONFIG_SHELL) $(srctree)/scripts/gcc-goto.sh $(CC)), y)
 642         KBUILD_CFLAGS += -DCC_HAVE_ASM_GOTO
 643 endif
 644
 645 # Add user supplied CPPFLAGS, AFLAGS and CFLAGS as the last assignments
 646 # But warn user when we do so
 647 warn-assign = \
 648 $(warning "WARNING: Appending $$K$(1) ($(K$(1))) from $(origin K$(1)) to kernel $$$(1)")
 649
 650 ifneq ($(KCPPFLAGS),)
 651         $(call warn-assign,CPPFLAGS)
 652         KBUILD_CPPFLAGS += $(KCPPFLAGS)
 653 endif
 654 ifneq ($(KAFLAGS),)
 655         $(call warn-assign,AFLAGS)
 656         KBUILD_AFLAGS += $(KAFLAGS)
 657 endif
 658 ifneq ($(KCFLAGS),)
 659         $(call warn-assign,CFLAGS)
 660         KBUILD_CFLAGS += $(KCFLAGS)
 661 endif
 662
 663 # Use --build-id when available.
 664 LDFLAGS_BUILD_ID = $(patsubst -Wl$(comma)%,%,\
 665                               $(call cc-ldoption, -Wl$(comma)--build-id,))
 666 KBUILD_LDFLAGS_MODULE += $(LDFLAGS_BUILD_ID)
 667 LDFLAGS_vmlinux += $(LDFLAGS_BUILD_ID)
 668
 669 ifeq ($(CONFIG_STRIP_ASM_SYMS),y)
 670 LDFLAGS_vmlinux += $(call ld-option, -X,)
 671 endif
 672
 673 # Default kernel image to build when no specific target is given.
 674 # KBUILD_IMAGE may be overruled on the command line or
 675 # set in the environment
 676 # Also any assignments in arch/$(ARCH)/Makefile take precedence over
 677 # this default value
 678 export KBUILD_IMAGE ?= vmlinux
 679
 680 #
 681 # INSTALL_PATH specifies where to place the updated kernel and system map
 682 # images. Default is /boot, but you can set it to other values
 683 export  INSTALL_PATH ?= /boot
 684
 685 #
 686 # INSTALL_MOD_PATH specifies a prefix to MODLIB for module directory
 687 # relocations required by build roots.  This is not defined in the
 688 # makefile but the argument can be passed to make if needed.
 689 #
 690
 691 MODLIB  = $(INSTALL_MOD_PATH)/lib/modules/$(KERNELRELEASE)
 692 export MODLIB
 693
 694 #
 695 #  INSTALL_MOD_STRIP, if defined, will cause modules to be
 696 #  stripped after they are installed.  If INSTALL_MOD_STRIP is '1', then
 697 #  the default option --strip-debug will be used.  Otherwise,
 698 #  INSTALL_MOD_STRIP value will be used as the options to the strip command.
 699
 700 ifdef INSTALL_MOD_STRIP
 701 ifeq ($(INSTALL_MOD_STRIP),1)
 702 mod_strip_cmd = $(STRIP) --strip-debug
 703 else
 704 mod_strip_cmd = $(STRIP) $(INSTALL_MOD_STRIP)
 705 endif # INSTALL_MOD_STRIP=1
 706 else
 707 mod_strip_cmd = true
 708 endif # INSTALL_MOD_STRIP
 709 export mod_strip_cmd
 710
 711
 712 ifeq ($(KBUILD_EXTMOD),)
 713 core-y          += kernel/ mm/ fs/ ipc/ security/ crypto/ block/
 714
 715 vmlinux-dirs    := $(patsubst %/,%,$(filter %/, $(init-y) $(init-m) \
 716                      $(core-y) $(core-m) $(drivers-y) $(drivers-m) \
 717                      $(net-y) $(net-m) $(libs-y) $(libs-m)))
 718
 719 vmlinux-alldirs := $(sort $(vmlinux-dirs) $(patsubst %/,%,$(filter %/, \
 720                      $(init-n) $(init-) \
 721                      $(core-n) $(core-) $(drivers-n) $(drivers-) \
 722                      $(net-n)  $(net-)  $(libs-n)    $(libs-))))
 723
 724 init-y          := $(patsubst %/, %/built-in.o, $(init-y))
 725 core-y          := $(patsubst %/, %/built-in.o, $(core-y))
 726 drivers-y       := $(patsubst %/, %/built-in.o, $(drivers-y))
 727 net-y           := $(patsubst %/, %/built-in.o, $(net-y))
 728 libs-y1         := $(patsubst %/, %/lib.a, $(libs-y))
 729 libs-y2         := $(patsubst %/, %/built-in.o, $(libs-y))
 730 libs-y          := $(libs-y1) $(libs-y2)
 731
 732 # Build vmlinux
 733 # ---------------------------------------------------------------------------
 734 # vmlinux is built from the objects selected by $(vmlinux-init) and
 735 # $(vmlinux-main). Most are built-in.o files from top-level directories
 736 # in the kernel tree, others are specified in arch/$(ARCH)/Makefile.
 737 # Ordering when linking is important, and $(vmlinux-init) must be first.
 738 #
 739 # vmlinux
 740 #   ^
 741 #   |
 742 #   +-< $(vmlinux-init)
 743 #   |   +--< init/version.o + more
 744 #   |
 745 #   +--< $(vmlinux-main)
 746 #   |    +--< driver/built-in.o mm/built-in.o + more
 747 #   |
 748 #   +-< kallsyms.o (see description in CONFIG_KALLSYMS section)
 749 #
 750 # vmlinux version (uname -v) cannot be updated during normal
 751 # descending-into-subdirs phase since we do not yet know if we need to
 752 # update vmlinux.
 753 # Therefore this step is delayed until just before final link of vmlinux -
 754 # except in the kallsyms case where it is done just before adding the
 755 # symbols to the kernel.
 756 #
 757 # System.map is generated to document addresses of all kernel symbols
 758
 759 vmlinux-init := $(head-y) $(init-y)
 760 vmlinux-main := $(core-y) $(libs-y) $(drivers-y) $(net-y)
 761 vmlinux-all  := $(vmlinux-init) $(vmlinux-main)
 762 vmlinux-lds  := arch/$(SRCARCH)/kernel/vmlinux.lds
 763 export KBUILD_VMLINUX_OBJS := $(vmlinux-all)
 764
 765 # Rule to link vmlinux - also used during CONFIG_KALLSYMS
 766 # May be overridden by arch/$(ARCH)/Makefile
 767 quiet_cmd_vmlinux__ ?= LD      $@
 768       cmd_vmlinux__ ?= $(LD) $(LDFLAGS) $(LDFLAGS_vmlinux) -o $@ \
 769       -T $(vmlinux-lds) $(vmlinux-init)                          \
 770       --start-group $(vmlinux-main) --end-group                  \
 771       $(filter-out $(vmlinux-lds) $(vmlinux-init) $(vmlinux-main) vmlinux.o FORCE ,$^)
 772
 773 # Generate new vmlinux version
 774 quiet_cmd_vmlinux_version = GEN     .version
 775       cmd_vmlinux_version = set -e;                     \
 776         if [ ! -r .version ]; then                      \
 777           rm -f .version;                               \
 778           echo 1 >.version;                             \
 779         else                                            \
 780           mv .version .old_version;                     \
 781           expr 0$$(cat .old_version) + 1 >.version;     \
 782         fi;                                             \
 783         $(MAKE) $(build)=init
 784
 785 # Generate System.map
 786 quiet_cmd_sysmap = SYSMAP
 787       cmd_sysmap = $(CONFIG_SHELL) $(srctree)/scripts/mksysmap
 788
 789 # Link of vmlinux
 790 # If CONFIG_KALLSYMS is set .version is already updated
 791 # Generate System.map and verify that the content is consistent
 792 # Use + in front of the vmlinux_version rule to silent warning with make -j2
 793 # First command is ':' to allow us to use + in front of the rule
 794 define rule_vmlinux__
 795         :
 796         $(if $(CONFIG_KALLSYMS),,+$(call cmd,vmlinux_version))
 797
 798         $(call cmd,vmlinux__)
 799         $(Q)echo 'cmd_$@ := $(cmd_vmlinux__)' > $(@D)/.$(@F).cmd
 800
 801         $(Q)$(if $($(quiet)cmd_sysmap),                                      \
 802           echo '  $($(quiet)cmd_sysmap)  System.map' &&)                     \
 803         $(cmd_sysmap) $@ System.map;                                         \
 804         if [ $$? -ne 0 ]; then                                               \
 805                 rm -f $@;                                                    \
 806                 /bin/false;                                                  \
 807         fi;
 808         $(verify_kallsyms)
 809 endef
 810
 811
 812 ifdef CONFIG_KALLSYMS
 813 # Generate section listing all symbols and add it into vmlinux $(kallsyms.o)
 814 # It's a three stage process:
 815 # o .tmp_vmlinux1 has all symbols and sections, but __kallsyms is
 816 #   empty
 817 #   Running kallsyms on that gives us .tmp_kallsyms1.o with
 818 #   the right size - vmlinux version (uname -v) is updated during this step
 819 # o .tmp_vmlinux2 now has a __kallsyms section of the right size,
 820 #   but due to the added section, some addresses have shifted.
 821 #   From here, we generate a correct .tmp_kallsyms2.o
 822 # o The correct .tmp_kallsyms2.o is linked into the final vmlinux.
 823 # o Verify that the System.map from vmlinux matches the map from
 824 #   .tmp_vmlinux2, just in case we did not generate kallsyms correctly.
 825 # o If 'make KALLSYMS_EXTRA_PASS=1" was used, do an extra pass using
 826 #   .tmp_vmlinux3 and .tmp_kallsyms3.o.  This is only meant as a
 827 #   temporary bypass to allow the kernel to be built while the
 828 #   maintainers work out what went wrong with kallsyms.
 829
 830 last_kallsyms := 2
 831
 832 ifdef KALLSYMS_EXTRA_PASS
 833 ifneq ($(KALLSYMS_EXTRA_PASS),0)
 834 last_kallsyms := 3
 835 endif
 836 endif
 837
 838 kallsyms.o := .tmp_kallsyms$(last_kallsyms).o
 839
 840 define verify_kallsyms
 841         $(Q)$(if $($(quiet)cmd_sysmap),                                      \
 842           echo '  $($(quiet)cmd_sysmap)  .tmp_System.map' &&)                \
 843           $(cmd_sysmap) .tmp_vmlinux$(last_kallsyms) .tmp_System.map
 844         $(Q)cmp -s System.map .tmp_System.map ||                             \
 845                 (echo Inconsistent kallsyms data;                            \
 846                  echo This is a bug - please report about it;                \
 847                  echo Try "make KALLSYMS_EXTRA_PASS=1" as a workaround;      \
 848                  rm .tmp_kallsyms* ; /bin/false )
 849 endef
 850
 851 # Update vmlinux version before link
 852 # Use + in front of this rule to silent warning about make -j1
 853 # First command is ':' to allow us to use + in front of this rule
 854 cmd_ksym_ld = $(cmd_vmlinux__)
 855 define rule_ksym_ld
 856         :
 857         +$(call cmd,vmlinux_version)
 858         $(call cmd,vmlinux__)
 859         $(Q)echo 'cmd_$@ := $(cmd_vmlinux__)' > $(@D)/.$(@F).cmd
 860 endef
 861
 862 # Generate .S file with all kernel symbols
 863 quiet_cmd_kallsyms = KSYM    $@
 864       cmd_kallsyms = $(NM) -n $< | $(KALLSYMS) \
 865                      $(if $(CONFIG_KALLSYMS_ALL),--all-symbols) > $@
 866
 867 .tmp_kallsyms1.o .tmp_kallsyms2.o .tmp_kallsyms3.o: %.o: %.S scripts FORCE
 868         $(call if_changed_dep,as_o_S)
 869
 870 .tmp_kallsyms%.S: .tmp_vmlinux% $(KALLSYMS)
 871         $(call cmd,kallsyms)
 872
 873 # .tmp_vmlinux1 must be complete except kallsyms, so update vmlinux version
 874 .tmp_vmlinux1: $(vmlinux-lds) $(vmlinux-all) FORCE
 875         $(call if_changed_rule,ksym_ld)
 876
 877 .tmp_vmlinux2: $(vmlinux-lds) $(vmlinux-all) .tmp_kallsyms1.o FORCE
 878         $(call if_changed,vmlinux__)
 879
 880 .tmp_vmlinux3: $(vmlinux-lds) $(vmlinux-all) .tmp_kallsyms2.o FORCE
 881         $(call if_changed,vmlinux__)
 882
 883 # Needs to visit scripts/ before $(KALLSYMS) can be used.
 884 $(KALLSYMS): scripts ;
 885
 886 # Generate some data for debugging strange kallsyms problems
 887 debug_kallsyms: .tmp_map$(last_kallsyms)
 888
 889 .tmp_map%: .tmp_vmlinux% FORCE
 890         ($(OBJDUMP) -h $< | $(AWK) '/^ +[0-9]/{print $$4 " 0 " $$2}'; $(NM) $<) | sort > $@
 891
 892 .tmp_map3: .tmp_map2
 893
 894 .tmp_map2: .tmp_map1
 895
 896 endif # ifdef CONFIG_KALLSYMS
 897
 898 # Do modpost on a prelinked vmlinux. The finally linked vmlinux has
 899 # relevant sections renamed as per the linker script.
 900 quiet_cmd_vmlinux-modpost = LD      $@
 901       cmd_vmlinux-modpost = $(LD) $(LDFLAGS) -r -o $@                          \
 902          $(vmlinux-init) --start-group $(vmlinux-main) --end-group             \
 903          $(filter-out $(vmlinux-init) $(vmlinux-main) FORCE ,$^)
 904 define rule_vmlinux-modpost
 905         :
 906         +$(call cmd,vmlinux-modpost)
 907         $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost $@
 908         $(Q)echo 'cmd_$@ := $(cmd_vmlinux-modpost)' > $(dot-target).cmd
 909 endef
 910
 911 # vmlinux image - including updated kernel symbols
 912 vmlinux: $(vmlinux-lds) $(vmlinux-init) $(vmlinux-main) vmlinux.o $(kallsyms.o) FORCE
 913 ifdef CONFIG_HEADERS_CHECK
 914         $(Q)$(MAKE) -f $(srctree)/Makefile headers_check
 915 endif
 916 ifdef CONFIG_SAMPLES
 917         $(Q)$(MAKE) $(build)=samples
 918 endif
 919 ifdef CONFIG_BUILD_DOCSRC
 920         $(Q)$(MAKE) $(build)=Documentation
 921 endif
 922         $(call vmlinux-modpost)
 923         $(call if_changed_rule,vmlinux__)
 924         $(Q)rm -f .old_version
 925
 926 # build vmlinux.o first to catch section mismatch errors early
 927 ifdef CONFIG_KALLSYMS
 928 .tmp_vmlinux1: vmlinux.o
 929 endif
 930
 931 modpost-init := $(filter-out init/built-in.o, $(vmlinux-init))
 932 vmlinux.o: $(modpost-init) $(vmlinux-main) FORCE
 933         $(call if_changed_rule,vmlinux-modpost)
 934
 935 # The actual objects are generated when descending,
 936 # make sure no implicit rule kicks in
 937 $(sort $(vmlinux-init) $(vmlinux-main)) $(vmlinux-lds): $(vmlinux-dirs) ;
 938
 939 # Handle descending into subdirectories listed in $(vmlinux-dirs)
 940 # Preset locale variables to speed up the build process. Limit locale
 941 # tweaks to this spot to avoid wrong language settings when running
 942 # make menuconfig etc.
 943 # Error messages still appears in the original language
 944
 945 PHONY += $(vmlinux-dirs)
 946 $(vmlinux-dirs): prepare scripts
 947         $(Q)$(MAKE) $(build)=$@
 948
 949 # Store (new) KERNELRELASE string in include/config/kernel.release
 950 include/config/kernel.release: include/config/auto.conf FORCE
 951         $(Q)rm -f $@
 952         $(Q)echo "$(KERNELVERSION)$$($(CONFIG_SHELL) $(srctree)/scripts/setlocalversion $(srctree))" > $@
 953
 954
 955 # Things we need to do before we recursively start building the kernel
 956 # or the modules are listed in "prepare".
 957 # A multi level approach is used. prepareN is processed before prepareN-1.
 958 # archprepare is used in arch Makefiles and when processed asm symlink,
 959 # version.h and scripts_basic is processed / created.
 960
 961 # Listed in dependency order
 962 PHONY += prepare archprepare prepare0 prepare1 prepare2 prepare3
 963
 964 # prepare3 is used to check if we are building in a separate output directory,
 965 # and if so do:
 966 # 1) Check that make has not been executed in the kernel src $(srctree)
 967 prepare3: include/config/kernel.release
 968 ifneq ($(KBUILD_SRC),)
 969         @$(kecho) '  Using $(srctree) as source for kernel'
 970         $(Q)if [ -f $(srctree)/.config -o -d $(srctree)/include/config ]; then \
 971                 echo "  $(srctree) is not clean, please run 'make mrproper'";\
 972                 echo "  in the '$(srctree)' directory.";\
 973                 /bin/false; \
 974         fi;
 975 endif
 976
 977 # prepare2 creates a makefile if using a separate output directory
 978 prepare2: prepare3 outputmakefile asm-generic
 979
 980 prepare1: prepare2 include/linux/version.h include/generated/utsrelease.h \
 981                    include/config/auto.conf
 982         $(cmd_crmodverdir)
 983
 984 archprepare: archscripts prepare1 scripts_basic
 985
 986 prepare0: archprepare FORCE
 987         $(Q)$(MAKE) $(build)=.
 988
 989 # All the preparing..
 990 prepare: prepare0
 991
 992 # Generate some files
 993 # ---------------------------------------------------------------------------
 994
 995 # KERNELRELEASE can change from a few different places, meaning version.h
 996 # needs to be updated, so this check is forced on all builds
 997
 998 uts_len := 64
 999 define filechk_utsrelease.h
1000         if [ `echo -n "$(KERNELRELEASE)" | wc -c ` -gt $(uts_len) ]; then \
1001           echo '"$(KERNELRELEASE)" exceeds $(uts_len) characters' >&2;    \
1002           exit 1;                                                         \
1003         fi;                                                               \
1004         (echo \#define UTS_RELEASE \"$(KERNELRELEASE)\";)
1005 endef
1006
1007 define filechk_version.h
1008         (echo \#define LINUX_VERSION_CODE $(shell                             \
1009         expr $(VERSION) \* 65536 + 0$(PATCHLEVEL) \* 256 + 0$(SUBLEVEL));    \
1010         echo '#define KERNEL_VERSION(a,b,c) (((a) << 16) + ((b) << 8) + (c))';)
1011 endef
1012
1013 include/linux/version.h: $(srctree)/Makefile FORCE
1014         $(call filechk,version.h)
1015
1016 include/generated/utsrelease.h: include/config/kernel.release FORCE
1017         $(call filechk,utsrelease.h)
1018
1019 PHONY += headerdep
1020 headerdep:
1021         $(Q)find $(srctree)/include/ -name '*.h' | xargs --max-args 1 \
1022         $(srctree)/scripts/headerdep.pl -I$(srctree)/include
1023
1024 # ---------------------------------------------------------------------------
1025
1026 PHONY += depend dep
1027 depend dep:
1028         @echo '*** Warning: make $@ is unnecessary now.'
1029
1030 # ---------------------------------------------------------------------------
1031 # Firmware install
1032 INSTALL_FW_PATH=$(INSTALL_MOD_PATH)/lib/firmware
1033 export INSTALL_FW_PATH
1034
1035 PHONY += firmware_install
1036 firmware_install: FORCE
1037         @mkdir -p $(objtree)/firmware
1038         $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.fwinst obj=firmware __fw_install
1039
1040 # ---------------------------------------------------------------------------
1041 # Kernel headers
1042
1043 #Default location for installed headers
1044 export INSTALL_HDR_PATH = $(objtree)/usr
1045
1046 hdr-inst := -rR -f $(srctree)/scripts/Makefile.headersinst obj
1047
1048 # If we do an all arch process set dst to asm-$(hdr-arch)
1049 hdr-dst = $(if $(KBUILD_HEADERS), dst=include/asm-$(hdr-arch), dst=include/asm)
1050
1051 PHONY += archscripts
1052 archscripts:
1053
1054 PHONY += __headers
1055 __headers: include/linux/version.h scripts_basic asm-generic archscripts FORCE
1056         $(Q)$(MAKE) $(build)=scripts build_unifdef
1057
1058 PHONY += headers_install_all
1059 headers_install_all:
1060         $(Q)$(CONFIG_SHELL) $(srctree)/scripts/headers.sh install
1061
1062 PHONY += headers_install
1063 headers_install: __headers
1064         $(if $(wildcard $(srctree)/arch/$(hdr-arch)/include/asm/Kbuild),, \
1065         $(error Headers not exportable for the $(SRCARCH) architecture))
1066         $(Q)$(MAKE) $(hdr-inst)=include
1067         $(Q)$(MAKE) $(hdr-inst)=arch/$(hdr-arch)/include/asm $(hdr-dst)
1068
1069 PHONY += headers_check_all
1070 headers_check_all: headers_install_all
1071         $(Q)$(CONFIG_SHELL) $(srctree)/scripts/headers.sh check
1072
1073 PHONY += headers_check
1074 headers_check: headers_install
1075         $(Q)$(MAKE) $(hdr-inst)=include HDRCHECK=1
1076         $(Q)$(MAKE) $(hdr-inst)=arch/$(hdr-arch)/include/asm $(hdr-dst) HDRCHECK=1
1077
1078 # ---------------------------------------------------------------------------
1079 # Modules
1080
1081 ifdef CONFIG_MODULES
1082
1083 # By default, build modules as well
1084
1085 all: modules
1086
1087 #       Build modules
1088 #
1089 #       A module can be listed more than once in obj-m resulting in
1090 #       duplicate lines in modules.order files.  Those are removed
1091 #       using awk while concatenating to the final file.
1092
1093 PHONY += modules
1094 modules: $(vmlinux-dirs) $(if $(KBUILD_BUILTIN),vmlinux) modules.builtin
1095         $(Q)$(AWK) '!x[$$0]++' $(vmlinux-dirs:%=$(objtree)/%/modules.order) > $(objtree)/modules.order
1096         @$(kecho) '  Building modules, stage 2.';
1097         $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost
1098         $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.fwinst obj=firmware __fw_modbuild
1099
1100 modules.builtin: $(vmlinux-dirs:%=%/modules.builtin)
1101         $(Q)$(AWK) '!x[$$0]++' $^ > $(objtree)/modules.builtin
1102
1103 %/modules.builtin: include/config/auto.conf
1104         $(Q)$(MAKE) $(modbuiltin)=$*
1105
1106
1107 # Target to prepare building external modules
1108 PHONY += modules_prepare
1109 modules_prepare: prepare scripts
1110
1111 # Target to install modules
1112 PHONY += modules_install
1113 modules_install: _modinst_ _modinst_post
1114
1115 PHONY += _modinst_
1116 _modinst_:
1117         @rm -rf $(MODLIB)/kernel
1118         @rm -f $(MODLIB)/source
1119         @mkdir -p $(MODLIB)/kernel
1120         @ln -s $(srctree) $(MODLIB)/source
1121         @if [ ! $(objtree) -ef  $(MODLIB)/build ]; then \
1122                 rm -f $(MODLIB)/build ; \
1123                 ln -s $(objtree) $(MODLIB)/build ; \
1124         fi
1125         @cp -f $(objtree)/modules.order $(MODLIB)/
1126         @cp -f $(objtree)/modules.builtin $(MODLIB)/
1127         $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modinst
1128
1129 # This depmod is only for convenience to give the initial
1130 # boot a modules.dep even before / is mounted read-write.  However the
1131 # boot script depmod is the master version.
1132 PHONY += _modinst_post
1133 _modinst_post: _modinst_
1134         $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.fwinst obj=firmware __fw_modinst
1135         $(call cmd,depmod)
1136
1137 else # CONFIG_MODULES
1138
1139 # Modules not configured
1140 # ---------------------------------------------------------------------------
1141
1142 modules modules_install: FORCE
1143         @echo
1144         @echo "The present kernel configuration has modules disabled."
1145         @echo "Type 'make config' and enable loadable module support."
1146         @echo "Then build a kernel with module support enabled."
1147         @echo
1148         @exit 1
1149
1150 endif # CONFIG_MODULES
1151
1152 ###
1153 # Cleaning is done on three levels.
1154 # make clean     Delete most generated files
1155 #                Leave enough to build external modules
1156 # make mrproper  Delete the current configuration, and all generated files
1157 # make distclean Remove editor backup files, patch leftover files and the like
1158
1159 # Directories & files removed with 'make clean'
1160 CLEAN_DIRS  += $(MODVERDIR)
1161 CLEAN_FILES +=  vmlinux System.map \
1162                 .tmp_kallsyms* .tmp_version .tmp_vmlinux* .tmp_System.map
1163
1164 # Directories & files removed with 'make mrproper'
1165 MRPROPER_DIRS  += include/config usr/include include/generated          \
1166                   arch/*/include/generated
1167 MRPROPER_FILES += .config .config.old .version .old_version             \
1168                   include/linux/version.h                               \
1169                   Module.symvers tags TAGS cscope* GPATH GTAGS GRTAGS GSYMS
1170
1171 # clean - Delete most, but leave enough to build external modules
1172 #
1173 clean: rm-dirs  := $(CLEAN_DIRS)
1174 clean: rm-files := $(CLEAN_FILES)
1175 clean-dirs      := $(addprefix _clean_, . $(vmlinux-alldirs) Documentation)
1176
1177 PHONY += $(clean-dirs) clean archclean
1178 $(clean-dirs):
1179         $(Q)$(MAKE) $(clean)=$(patsubst _clean_%,%,$@)
1180
1181 clean: archclean
1182
1183 # mrproper - Delete all generated files, including .config
1184 #
1185 mrproper: rm-dirs  := $(wildcard $(MRPROPER_DIRS))
1186 mrproper: rm-files := $(wildcard $(MRPROPER_FILES))
1187 mrproper-dirs      := $(addprefix _mrproper_,Documentation/DocBook scripts)
1188
1189 PHONY += $(mrproper-dirs) mrproper archmrproper
1190 $(mrproper-dirs):
1191         $(Q)$(MAKE) $(clean)=$(patsubst _mrproper_%,%,$@)
1192
1193 mrproper: clean archmrproper $(mrproper-dirs)
1194         $(call cmd,rmdirs)
1195         $(call cmd,rmfiles)
1196
1197 # distclean
1198 #
1199 PHONY += distclean
1200
1201 distclean: mrproper
1202         @find $(srctree) $(RCS_FIND_IGNORE) \
1203                 \( -name '*.orig' -o -name '*.rej' -o -name '*~' \
1204                 -o -name '*.bak' -o -name '#*#' -o -name '.*.orig' \
1205                 -o -name '.*.rej' \
1206                 -o -name '*%' -o -name '.*.cmd' -o -name 'core' \) \
1207                 -type f -print | xargs rm -f
1208
1209
1210 # Packaging of the kernel to various formats
1211 # ---------------------------------------------------------------------------
1212 # rpm target kept for backward compatibility
1213 package-dir     := $(srctree)/scripts/package
1214
1215 %src-pkg: FORCE
1216         $(Q)$(MAKE) $(build)=$(package-dir) $@
1217 %pkg: include/config/kernel.release FORCE
1218         $(Q)$(MAKE) $(build)=$(package-dir) $@
1219 rpm: include/config/kernel.release FORCE
1220         $(Q)$(MAKE) $(build)=$(package-dir) $@
1221
1222
1223 # Brief documentation of the typical targets used
1224 # ---------------------------------------------------------------------------
1225
1226 boards := $(wildcard $(srctree)/arch/$(SRCARCH)/configs/*_defconfig)
1227 boards := $(notdir $(boards))
1228 board-dirs := $(dir $(wildcard $(srctree)/arch/$(SRCARCH)/configs/*/*_defconfig))
1229 board-dirs := $(sort $(notdir $(board-dirs:/=)))
1230
1231 help:
1232         @echo  'Cleaning targets:'
1233         @echo  '  clean           - Remove most generated files but keep the config and'
1234         @echo  '                    enough build support to build external modules'
1235         @echo  '  mrproper        - Remove all generated files + config + various backup files'
1236         @echo  '  distclean       - mrproper + remove editor backup and patch files'
1237         @echo  ''
1238         @echo  'Configuration targets:'
1239         @$(MAKE) -f $(srctree)/scripts/kconfig/Makefile help
1240         @echo  ''
1241         @echo  'Other generic targets:'
1242         @echo  '  all             - Build all targets marked with [*]'
1243         @echo  '* vmlinux         - Build the bare kernel'
1244         @echo  '* modules         - Build all modules'
1245         @echo  '  modules_install - Install all modules to INSTALL_MOD_PATH (default: /)'
1246         @echo  '  firmware_install- Install all firmware to INSTALL_FW_PATH'
1247         @echo  '                    (default: $$(INSTALL_MOD_PATH)/lib/firmware)'
1248         @echo  '  dir/            - Build all files in dir and below'
1249         @echo  '  dir/file.[oisS] - Build specified target only'
1250         @echo  '  dir/file.lst    - Build specified mixed source/assembly target only'
1251         @echo  '                    (requires a recent binutils and recent build (System.map))'
1252         @echo  '  dir/file.ko     - Build module including final link'
1253         @echo  '  modules_prepare - Set up for building external modules'
1254         @echo  '  tags/TAGS       - Generate tags file for editors'
1255         @echo  '  cscope          - Generate cscope index'
1256         @echo  '  gtags           - Generate GNU GLOBAL index'
1257         @echo  '  kernelrelease   - Output the release version string'
1258         @echo  '  kernelversion   - Output the version stored in Makefile'
1259         @echo  '  headers_install - Install sanitised kernel headers to INSTALL_HDR_PATH'; \
1260          echo  '                    (default: $(INSTALL_HDR_PATH))'; \
1261          echo  ''
1262         @echo  'Static analysers'
1263         @echo  '  checkstack      - Generate a list of stack hogs'
1264         @echo  '  namespacecheck  - Name space analysis on compiled kernel'
1265         @echo  '  versioncheck    - Sanity check on version.h usage'
1266         @echo  '  includecheck    - Check for duplicate included header files'
1267         @echo  '  export_report   - List the usages of all exported symbols'
1268         @echo  '  headers_check   - Sanity check on exported headers'
1269         @echo  '  headerdep       - Detect inclusion cycles in headers'
1270         @$(MAKE) -f $(srctree)/scripts/Makefile.help checker-help
1271         @echo  ''
1272         @echo  'Kernel packaging:'
1273         @$(MAKE) $(build)=$(package-dir) help
1274         @echo  ''
1275         @echo  'Documentation targets:'
1276         @$(MAKE) -f $(srctree)/Documentation/DocBook/Makefile dochelp
1277         @echo  ''
1278         @echo  'Architecture specific targets ($(SRCARCH)):'
1279         @$(if $(archhelp),$(archhelp),\
1280                 echo '  No architecture specific help defined for $(SRCARCH)')
1281         @echo  ''
1282         @$(if $(boards), \
1283                 $(foreach b, $(boards), \
1284                 printf "  %-24s - Build for %s\\n" $(b) $(subst _defconfig,,$(b));) \
1285                 echo '')
1286         @$(if $(board-dirs), \
1287                 $(foreach b, $(board-dirs), \
1288                 printf "  %-16s - Show %s-specific targets\\n" help-$(b) $(b);) \
1289                 printf "  %-16s - Show all of the above\\n" help-boards; \
1290                 echo '')
1291
1292         @echo  '  make V=0|1 [targets] 0 => quiet build (default), 1 => verbose build'
1293         @echo  '  make V=2   [targets] 2 => give reason for rebuild of target'
1294         @echo  '  make O=dir [targets] Locate all output files in "dir", including .config'
1295         @echo  '  make C=1   [targets] Check all c source with $$CHECK (sparse by default)'
1296         @echo  '  make C=2   [targets] Force check of all c source with $$CHECK'
1297         @echo  '  make RECORDMCOUNT_WARN=1 [targets] Warn about ignored mcount sections'
1298         @echo  '  make W=n   [targets] Enable extra gcc checks, n=1,2,3 where'
1299         @echo  '                1: warnings which may be relevant and do not occur too often'
1300         @echo  '                2: warnings which occur quite often but may still be relevant'
1301         @echo  '                3: more obscure warnings, can most likely be ignored'
1302         @echo  '                Multiple levels can be combined with W=12 or W=123'
1303         @echo  ''
1304         @echo  'Execute "make" or "make all" to build all targets marked with [*] '
1305         @echo  'For further info see the ./README file'
1306
1307
1308 help-board-dirs := $(addprefix help-,$(board-dirs))
1309
1310 help-boards: $(help-board-dirs)
1311
1312 boards-per-dir = $(notdir $(wildcard $(srctree)/arch/$(SRCARCH)/configs/$*/*_defconfig))
1313
1314 $(help-board-dirs): help-%:
1315         @echo  'Architecture specific targets ($(SRCARCH) $*):'
1316         @$(if $(boards-per-dir), \
1317                 $(foreach b, $(boards-per-dir), \
1318                 printf "  %-24s - Build for %s\\n" $*/$(b) $(subst _defconfig,,$(b));) \
1319                 echo '')
1320
1321
1322 # Documentation targets
1323 # ---------------------------------------------------------------------------
1324 %docs: scripts_basic FORCE
1325         $(Q)$(MAKE) $(build)=scripts build_docproc
1326         $(Q)$(MAKE) $(build)=Documentation/DocBook $@
1327
1328 else # KBUILD_EXTMOD
1329
1330 ###
1331 # External module support.
1332 # When building external modules the kernel used as basis is considered
1333 # read-only, and no consistency checks are made and the make
1334 # system is not used on the basis kernel. If updates are required
1335 # in the basis kernel ordinary make commands (without M=...) must
1336 # be used.
1337 #
1338 # The following are the only valid targets when building external
1339 # modules.
1340 # make M=dir clean     Delete all automatically generated files
1341 # make M=dir modules   Make all modules in specified dir
1342 # make M=dir           Same as 'make M=dir modules'
1343 # make M=dir modules_install
1344 #                      Install the modules built in the module directory
1345 #                      Assumes install directory is already created
1346
1347 # We are always building modules
1348 KBUILD_MODULES := 1
1349 PHONY += crmodverdir
1350 crmodverdir:
1351         $(cmd_crmodverdir)
1352
1353 PHONY += $(objtree)/Module.symvers
1354 $(objtree)/Module.symvers:
1355         @test -e $(objtree)/Module.symvers || ( \
1356         echo; \
1357         echo "  WARNING: Symbol version dump $(objtree)/Module.symvers"; \
1358         echo "           is missing; modules will have no dependencies and modversions."; \
1359         echo )
1360
1361 module-dirs := $(addprefix _module_,$(KBUILD_EXTMOD))
1362 PHONY += $(module-dirs) modules
1363 $(module-dirs): crmodverdir $(objtree)/Module.symvers
1364         $(Q)$(MAKE) $(build)=$(patsubst _module_%,%,$@)
1365
1366 modules: $(module-dirs)
1367         @$(kecho) '  Building modules, stage 2.';
1368         $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost
1369
1370 PHONY += modules_install
1371 modules_install: _emodinst_ _emodinst_post
1372
1373 install-dir := $(if $(INSTALL_MOD_DIR),$(INSTALL_MOD_DIR),extra)
1374 PHONY += _emodinst_
1375 _emodinst_:
1376         $(Q)mkdir -p $(MODLIB)/$(install-dir)
1377         $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modinst
1378
1379 PHONY += _emodinst_post
1380 _emodinst_post: _emodinst_
1381         $(call cmd,depmod)
1382
1383 clean-dirs := $(addprefix _clean_,$(KBUILD_EXTMOD))
1384
1385 PHONY += $(clean-dirs) clean
1386 $(clean-dirs):
1387         $(Q)$(MAKE) $(clean)=$(patsubst _clean_%,%,$@)
1388
1389 clean:  rm-dirs := $(MODVERDIR)
1390 clean: rm-files := $(KBUILD_EXTMOD)/Module.symvers
1391
1392 help:
1393         @echo  '  Building external modules.'
1394         @echo  '  Syntax: make -C path/to/kernel/src M=$$PWD target'
1395         @echo  ''
1396         @echo  '  modules         - default target, build the module(s)'
1397         @echo  '  modules_install - install the module'
1398         @echo  '  clean           - remove generated files in module directory only'
1399         @echo  ''
1400
1401 # Dummies...
1402 PHONY += prepare scripts
1403 prepare: ;
1404 scripts: ;
1405 endif # KBUILD_EXTMOD
1406
1407 clean: $(clean-dirs)
1408         $(call cmd,rmdirs)
1409         $(call cmd,rmfiles)
1410         @find $(if $(KBUILD_EXTMOD), $(KBUILD_EXTMOD), .) $(RCS_FIND_IGNORE) \
1411                 \( -name '*.[oas]' -o -name '*.ko' -o -name '.*.cmd' \
1412                 -o -name '.*.d' -o -name '.*.tmp' -o -name '*.mod.c' \
1413                 -o -name '*.symtypes' -o -name 'modules.order' \
1414                 -o -name modules.builtin -o -name '.tmp_*.o.*' \
1415                 -o -name '*.gcno' \) -type f -print | xargs rm -f
1416
1417 # Generate tags for editors
1418 # ---------------------------------------------------------------------------
1419 quiet_cmd_tags = GEN     $@
1420       cmd_tags = $(CONFIG_SHELL) $(srctree)/scripts/tags.sh $@
1421
1422 tags TAGS cscope gtags: FORCE
1423         $(call cmd,tags)
1424
1425 # Scripts to check various things for consistency
1426 # ---------------------------------------------------------------------------
1427
1428 PHONY += includecheck versioncheck coccicheck namespacecheck export_report
1429
1430 includecheck:
1431         find $(srctree)/* $(RCS_FIND_IGNORE) \
1432                 -name '*.[hcS]' -type f -print | sort \
1433                 | xargs $(PERL) -w $(srctree)/scripts/checkincludes.pl
1434
1435 versioncheck:
1436         find $(srctree)/* $(RCS_FIND_IGNORE) \
1437                 -name '*.[hcS]' -type f -print | sort \
1438                 | xargs $(PERL) -w $(srctree)/scripts/checkversion.pl
1439
1440 coccicheck:
1441         $(Q)$(CONFIG_SHELL) $(srctree)/scripts/$@
1442
1443 namespacecheck:
1444         $(PERL) $(srctree)/scripts/namespace.pl
1445
1446 export_report:
1447         $(PERL) $(srctree)/scripts/export_report.pl
1448
1449 endif #ifeq ($(config-targets),1)
1450 endif #ifeq ($(mixed-targets),1)
1451
1452 PHONY += checkstack kernelrelease kernelversion
1453
1454 # UML needs a little special treatment here.  It wants to use the host
1455 # toolchain, so needs $(SUBARCH) passed to checkstack.pl.  Everyone
1456 # else wants $(ARCH), including people doing cross-builds, which means
1457 # that $(SUBARCH) doesn't work here.
1458 ifeq ($(ARCH), um)
1459 CHECKSTACK_ARCH := $(SUBARCH)
1460 else
1461 CHECKSTACK_ARCH := $(ARCH)
1462 endif
1463 checkstack:
1464         $(OBJDUMP) -d vmlinux $$(find . -name '*.ko') | \
1465         $(PERL) $(src)/scripts/checkstack.pl $(CHECKSTACK_ARCH)
1466
1467 kernelrelease:
1468         @echo "$(KERNELVERSION)$$($(CONFIG_SHELL) $(srctree)/scripts/setlocalversion $(srctree))"
1469
1470 kernelversion:
1471         @echo $(KERNELVERSION)
1472
1473 # Single targets
1474 # ---------------------------------------------------------------------------
1475 # Single targets are compatible with:
1476 # - build with mixed source and output
1477 # - build with separate output dir 'make O=...'
1478 # - external modules
1479 #
1480 #  target-dir => where to store outputfile
1481 #  build-dir  => directory in kernel source tree to use
1482
1483 ifeq ($(KBUILD_EXTMOD),)
1484         build-dir  = $(patsubst %/,%,$(dir $@))
1485         target-dir = $(dir $@)
1486 else
1487         zap-slash=$(filter-out .,$(patsubst %/,%,$(dir $@)))
1488         build-dir  = $(KBUILD_EXTMOD)$(if $(zap-slash),/$(zap-slash))
1489         target-dir = $(if $(KBUILD_EXTMOD),$(dir $<),$(dir $@))
1490 endif
1491
1492 %.s: %.c prepare scripts FORCE
1493         $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
1494 %.i: %.c prepare scripts FORCE
1495         $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
1496 %.o: %.c prepare scripts FORCE
1497         $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
1498 %.lst: %.c prepare scripts FORCE
1499         $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
1500 %.s: %.S prepare scripts FORCE
1501         $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
1502 %.o: %.S prepare scripts FORCE
1503         $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
1504 %.symtypes: %.c prepare scripts FORCE
1505         $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
1506
1507 # Modules
1508 /: prepare scripts FORCE
1509         $(cmd_crmodverdir)
1510         $(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \
1511         $(build)=$(build-dir)
1512 %/: prepare scripts FORCE
1513         $(cmd_crmodverdir)
1514         $(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \
1515         $(build)=$(build-dir)
1516 %.ko: prepare scripts FORCE
1517         $(cmd_crmodverdir)
1518         $(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1)   \
1519         $(build)=$(build-dir) $(@:.ko=.o)
1520         $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost
1521
1522 # FIXME Should go into a make.lib or something
1523 # ===========================================================================
1524
1525 quiet_cmd_rmdirs = $(if $(wildcard $(rm-dirs)),CLEAN   $(wildcard $(rm-dirs)))
1526       cmd_rmdirs = rm -rf $(rm-dirs)
1527
1528 quiet_cmd_rmfiles = $(if $(wildcard $(rm-files)),CLEAN   $(wildcard $(rm-files)))
1529       cmd_rmfiles = rm -f $(rm-files)
1530
1531 # Run depmod only if we have System.map and depmod is executable
1532 quiet_cmd_depmod = DEPMOD  $(KERNELRELEASE)
1533       cmd_depmod = $(CONFIG_SHELL) $(srctree)/scripts/depmod.sh $(DEPMOD) \
1534                    $(KERNELRELEASE)
1535
1536 # Create temporary dir for module support files
1537 # clean it up only when building all modules
1538 cmd_crmodverdir = $(Q)mkdir -p $(MODVERDIR) \
1539                   $(if $(KBUILD_MODULES),; rm -f $(MODVERDIR)/*)
1540
1541 a_flags = -Wp,-MD,$(depfile) $(KBUILD_AFLAGS) $(AFLAGS_KERNEL) \
1542           $(KBUILD_AFLAGS_KERNEL)                              \
1543           $(NOSTDINC_FLAGS) $(LINUXINCLUDE) $(KBUILD_CPPFLAGS) \
1544           $(modkern_aflags) $(EXTRA_AFLAGS) $(AFLAGS_$(basetarget).o)
1545
1546 quiet_cmd_as_o_S = AS      $@
1547 cmd_as_o_S       = $(CC) $(a_flags) -c -o $@ $<
1548
1549 # read all saved command lines
1550
1551 targets := $(wildcard $(sort $(targets)))
1552 cmd_files := $(wildcard .*.cmd $(foreach f,$(targets),$(dir $(f)).$(notdir $(f)).cmd))
1553
1554 ifneq ($(cmd_files),)
1555   $(cmd_files): ;       # Do not try to update included dependency files
1556   include $(cmd_files)
1557 endif
1558
1559 # Shorthand for $(Q)$(MAKE) -f scripts/Makefile.clean obj=dir
1560 # Usage:
1561 # $(Q)$(MAKE) $(clean)=dir
1562 clean := -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.clean obj
1563
1564 endif   # skip-makefile
1565
1566 PHONY += FORCE
1567 FORCE:
1568
1569 # Declare the contents of the .PHONY variable as phony.  We keep that
1570 # information in a variable so we can use it in if_changed and friends.
1571 .PHONY: $(PHONY)