net_sched: minor netns related cleanup
[linux/fpc-iii.git] / drivers / ssb / scan.c
blob0d6c0280eb34cf6d2e20db19faf51107b9bfa89b
1 /*
2 * Sonics Silicon Backplane
3 * Bus scanning
5 * Copyright (C) 2005-2007 Michael Buesch <mb@bu3sch.de>
6 * Copyright (C) 2005 Martin Langer <martin-langer@gmx.de>
7 * Copyright (C) 2005 Stefano Brivio <st3@riseup.net>
8 * Copyright (C) 2005 Danny van Dyk <kugelfang@gentoo.org>
9 * Copyright (C) 2005 Andreas Jaggi <andreas.jaggi@waterwave.ch>
10 * Copyright (C) 2006 Broadcom Corporation.
12 * Licensed under the GNU/GPL. See COPYING for details.
15 #include <linux/ssb/ssb.h>
16 #include <linux/ssb/ssb_regs.h>
17 #include <linux/pci.h>
18 #include <linux/io.h>
20 #include <pcmcia/cs_types.h>
21 #include <pcmcia/cs.h>
22 #include <pcmcia/cistpl.h>
23 #include <pcmcia/ds.h>
25 #include "ssb_private.h"
28 const char *ssb_core_name(u16 coreid)
30 switch (coreid) {
31 case SSB_DEV_CHIPCOMMON:
32 return "ChipCommon";
33 case SSB_DEV_ILINE20:
34 return "ILine 20";
35 case SSB_DEV_SDRAM:
36 return "SDRAM";
37 case SSB_DEV_PCI:
38 return "PCI";
39 case SSB_DEV_MIPS:
40 return "MIPS";
41 case SSB_DEV_ETHERNET:
42 return "Fast Ethernet";
43 case SSB_DEV_V90:
44 return "V90";
45 case SSB_DEV_USB11_HOSTDEV:
46 return "USB 1.1 Hostdev";
47 case SSB_DEV_ADSL:
48 return "ADSL";
49 case SSB_DEV_ILINE100:
50 return "ILine 100";
51 case SSB_DEV_IPSEC:
52 return "IPSEC";
53 case SSB_DEV_PCMCIA:
54 return "PCMCIA";
55 case SSB_DEV_INTERNAL_MEM:
56 return "Internal Memory";
57 case SSB_DEV_MEMC_SDRAM:
58 return "MEMC SDRAM";
59 case SSB_DEV_EXTIF:
60 return "EXTIF";
61 case SSB_DEV_80211:
62 return "IEEE 802.11";
63 case SSB_DEV_MIPS_3302:
64 return "MIPS 3302";
65 case SSB_DEV_USB11_HOST:
66 return "USB 1.1 Host";
67 case SSB_DEV_USB11_DEV:
68 return "USB 1.1 Device";
69 case SSB_DEV_USB20_HOST:
70 return "USB 2.0 Host";
71 case SSB_DEV_USB20_DEV:
72 return "USB 2.0 Device";
73 case SSB_DEV_SDIO_HOST:
74 return "SDIO Host";
75 case SSB_DEV_ROBOSWITCH:
76 return "Roboswitch";
77 case SSB_DEV_PARA_ATA:
78 return "PATA";
79 case SSB_DEV_SATA_XORDMA:
80 return "SATA XOR-DMA";
81 case SSB_DEV_ETHERNET_GBIT:
82 return "GBit Ethernet";
83 case SSB_DEV_PCIE:
84 return "PCI-E";
85 case SSB_DEV_MIMO_PHY:
86 return "MIMO PHY";
87 case SSB_DEV_SRAM_CTRLR:
88 return "SRAM Controller";
89 case SSB_DEV_MINI_MACPHY:
90 return "Mini MACPHY";
91 case SSB_DEV_ARM_1176:
92 return "ARM 1176";
93 case SSB_DEV_ARM_7TDMI:
94 return "ARM 7TDMI";
96 return "UNKNOWN";
99 static u16 pcidev_to_chipid(struct pci_dev *pci_dev)
101 u16 chipid_fallback = 0;
103 switch (pci_dev->device) {
104 case 0x4301:
105 chipid_fallback = 0x4301;
106 break;
107 case 0x4305 ... 0x4307:
108 chipid_fallback = 0x4307;
109 break;
110 case 0x4403:
111 chipid_fallback = 0x4402;
112 break;
113 case 0x4610 ... 0x4615:
114 chipid_fallback = 0x4610;
115 break;
116 case 0x4710 ... 0x4715:
117 chipid_fallback = 0x4710;
118 break;
119 case 0x4320 ... 0x4325:
120 chipid_fallback = 0x4309;
121 break;
122 case PCI_DEVICE_ID_BCM4401:
123 case PCI_DEVICE_ID_BCM4401B0:
124 case PCI_DEVICE_ID_BCM4401B1:
125 chipid_fallback = 0x4401;
126 break;
127 default:
128 ssb_printk(KERN_ERR PFX
129 "PCI-ID not in fallback list\n");
132 return chipid_fallback;
135 static u8 chipid_to_nrcores(u16 chipid)
137 switch (chipid) {
138 case 0x5365:
139 return 7;
140 case 0x4306:
141 return 6;
142 case 0x4310:
143 return 8;
144 case 0x4307:
145 case 0x4301:
146 return 5;
147 case 0x4401:
148 case 0x4402:
149 return 3;
150 case 0x4710:
151 case 0x4610:
152 case 0x4704:
153 return 9;
154 default:
155 ssb_printk(KERN_ERR PFX
156 "CHIPID not in nrcores fallback list\n");
159 return 1;
162 static u32 scan_read32(struct ssb_bus *bus, u8 current_coreidx,
163 u16 offset)
165 u32 lo, hi;
167 switch (bus->bustype) {
168 case SSB_BUSTYPE_SSB:
169 offset += current_coreidx * SSB_CORE_SIZE;
170 break;
171 case SSB_BUSTYPE_PCI:
172 break;
173 case SSB_BUSTYPE_PCMCIA:
174 if (offset >= 0x800) {
175 ssb_pcmcia_switch_segment(bus, 1);
176 offset -= 0x800;
177 } else
178 ssb_pcmcia_switch_segment(bus, 0);
179 lo = readw(bus->mmio + offset);
180 hi = readw(bus->mmio + offset + 2);
181 return lo | (hi << 16);
182 case SSB_BUSTYPE_SDIO:
183 offset += current_coreidx * SSB_CORE_SIZE;
184 return ssb_sdio_scan_read32(bus, offset);
186 return readl(bus->mmio + offset);
189 static int scan_switchcore(struct ssb_bus *bus, u8 coreidx)
191 switch (bus->bustype) {
192 case SSB_BUSTYPE_SSB:
193 break;
194 case SSB_BUSTYPE_PCI:
195 return ssb_pci_switch_coreidx(bus, coreidx);
196 case SSB_BUSTYPE_PCMCIA:
197 return ssb_pcmcia_switch_coreidx(bus, coreidx);
198 case SSB_BUSTYPE_SDIO:
199 return ssb_sdio_scan_switch_coreidx(bus, coreidx);
201 return 0;
204 void ssb_iounmap(struct ssb_bus *bus)
206 switch (bus->bustype) {
207 case SSB_BUSTYPE_SSB:
208 case SSB_BUSTYPE_PCMCIA:
209 iounmap(bus->mmio);
210 break;
211 case SSB_BUSTYPE_PCI:
212 #ifdef CONFIG_SSB_PCIHOST
213 pci_iounmap(bus->host_pci, bus->mmio);
214 #else
215 SSB_BUG_ON(1); /* Can't reach this code. */
216 #endif
217 break;
218 case SSB_BUSTYPE_SDIO:
219 break;
221 bus->mmio = NULL;
222 bus->mapped_device = NULL;
225 static void __iomem *ssb_ioremap(struct ssb_bus *bus,
226 unsigned long baseaddr)
228 void __iomem *mmio = NULL;
230 switch (bus->bustype) {
231 case SSB_BUSTYPE_SSB:
232 /* Only map the first core for now. */
233 /* fallthrough... */
234 case SSB_BUSTYPE_PCMCIA:
235 mmio = ioremap(baseaddr, SSB_CORE_SIZE);
236 break;
237 case SSB_BUSTYPE_PCI:
238 #ifdef CONFIG_SSB_PCIHOST
239 mmio = pci_iomap(bus->host_pci, 0, ~0UL);
240 #else
241 SSB_BUG_ON(1); /* Can't reach this code. */
242 #endif
243 break;
244 case SSB_BUSTYPE_SDIO:
245 /* Nothing to ioremap in the SDIO case, just fake it */
246 mmio = (void __iomem *)baseaddr;
247 break;
250 return mmio;
253 static int we_support_multiple_80211_cores(struct ssb_bus *bus)
255 /* More than one 802.11 core is only supported by special chips.
256 * There are chips with two 802.11 cores, but with dangling
257 * pins on the second core. Be careful and reject them here.
260 #ifdef CONFIG_SSB_PCIHOST
261 if (bus->bustype == SSB_BUSTYPE_PCI) {
262 if (bus->host_pci->vendor == PCI_VENDOR_ID_BROADCOM &&
263 bus->host_pci->device == 0x4324)
264 return 1;
266 #endif /* CONFIG_SSB_PCIHOST */
267 return 0;
270 int ssb_bus_scan(struct ssb_bus *bus,
271 unsigned long baseaddr)
273 int err = -ENOMEM;
274 void __iomem *mmio;
275 u32 idhi, cc, rev, tmp;
276 int dev_i, i;
277 struct ssb_device *dev;
278 int nr_80211_cores = 0;
280 mmio = ssb_ioremap(bus, baseaddr);
281 if (!mmio)
282 goto out;
283 bus->mmio = mmio;
285 err = scan_switchcore(bus, 0); /* Switch to first core */
286 if (err)
287 goto err_unmap;
289 idhi = scan_read32(bus, 0, SSB_IDHIGH);
290 cc = (idhi & SSB_IDHIGH_CC) >> SSB_IDHIGH_CC_SHIFT;
291 rev = (idhi & SSB_IDHIGH_RCLO);
292 rev |= (idhi & SSB_IDHIGH_RCHI) >> SSB_IDHIGH_RCHI_SHIFT;
294 bus->nr_devices = 0;
295 if (cc == SSB_DEV_CHIPCOMMON) {
296 tmp = scan_read32(bus, 0, SSB_CHIPCO_CHIPID);
298 bus->chip_id = (tmp & SSB_CHIPCO_IDMASK);
299 bus->chip_rev = (tmp & SSB_CHIPCO_REVMASK) >>
300 SSB_CHIPCO_REVSHIFT;
301 bus->chip_package = (tmp & SSB_CHIPCO_PACKMASK) >>
302 SSB_CHIPCO_PACKSHIFT;
303 if (rev >= 4) {
304 bus->nr_devices = (tmp & SSB_CHIPCO_NRCORESMASK) >>
305 SSB_CHIPCO_NRCORESSHIFT;
307 tmp = scan_read32(bus, 0, SSB_CHIPCO_CAP);
308 bus->chipco.capabilities = tmp;
309 } else {
310 if (bus->bustype == SSB_BUSTYPE_PCI) {
311 bus->chip_id = pcidev_to_chipid(bus->host_pci);
312 pci_read_config_word(bus->host_pci, PCI_REVISION_ID,
313 &bus->chip_rev);
314 bus->chip_package = 0;
315 } else {
316 bus->chip_id = 0x4710;
317 bus->chip_rev = 0;
318 bus->chip_package = 0;
321 if (!bus->nr_devices)
322 bus->nr_devices = chipid_to_nrcores(bus->chip_id);
323 if (bus->nr_devices > ARRAY_SIZE(bus->devices)) {
324 ssb_printk(KERN_ERR PFX
325 "More than %d ssb cores found (%d)\n",
326 SSB_MAX_NR_CORES, bus->nr_devices);
327 goto err_unmap;
329 if (bus->bustype == SSB_BUSTYPE_SSB) {
330 /* Now that we know the number of cores,
331 * remap the whole IO space for all cores.
333 err = -ENOMEM;
334 iounmap(mmio);
335 mmio = ioremap(baseaddr, SSB_CORE_SIZE * bus->nr_devices);
336 if (!mmio)
337 goto out;
338 bus->mmio = mmio;
341 /* Fetch basic information about each core/device */
342 for (i = 0, dev_i = 0; i < bus->nr_devices; i++) {
343 err = scan_switchcore(bus, i);
344 if (err)
345 goto err_unmap;
346 dev = &(bus->devices[dev_i]);
348 idhi = scan_read32(bus, i, SSB_IDHIGH);
349 dev->id.coreid = (idhi & SSB_IDHIGH_CC) >> SSB_IDHIGH_CC_SHIFT;
350 dev->id.revision = (idhi & SSB_IDHIGH_RCLO);
351 dev->id.revision |= (idhi & SSB_IDHIGH_RCHI) >> SSB_IDHIGH_RCHI_SHIFT;
352 dev->id.vendor = (idhi & SSB_IDHIGH_VC) >> SSB_IDHIGH_VC_SHIFT;
353 dev->core_index = i;
354 dev->bus = bus;
355 dev->ops = bus->ops;
357 printk(KERN_DEBUG PFX
358 "Core %d found: %s "
359 "(cc 0x%03X, rev 0x%02X, vendor 0x%04X)\n",
360 i, ssb_core_name(dev->id.coreid),
361 dev->id.coreid, dev->id.revision, dev->id.vendor);
363 switch (dev->id.coreid) {
364 case SSB_DEV_80211:
365 nr_80211_cores++;
366 if (nr_80211_cores > 1) {
367 if (!we_support_multiple_80211_cores(bus)) {
368 ssb_dprintk(KERN_INFO PFX "Ignoring additional "
369 "802.11 core\n");
370 continue;
373 break;
374 case SSB_DEV_EXTIF:
375 #ifdef CONFIG_SSB_DRIVER_EXTIF
376 if (bus->extif.dev) {
377 ssb_printk(KERN_WARNING PFX
378 "WARNING: Multiple EXTIFs found\n");
379 break;
381 bus->extif.dev = dev;
382 #endif /* CONFIG_SSB_DRIVER_EXTIF */
383 break;
384 case SSB_DEV_CHIPCOMMON:
385 if (bus->chipco.dev) {
386 ssb_printk(KERN_WARNING PFX
387 "WARNING: Multiple ChipCommon found\n");
388 break;
390 bus->chipco.dev = dev;
391 break;
392 case SSB_DEV_MIPS:
393 case SSB_DEV_MIPS_3302:
394 #ifdef CONFIG_SSB_DRIVER_MIPS
395 if (bus->mipscore.dev) {
396 ssb_printk(KERN_WARNING PFX
397 "WARNING: Multiple MIPS cores found\n");
398 break;
400 bus->mipscore.dev = dev;
401 #endif /* CONFIG_SSB_DRIVER_MIPS */
402 break;
403 case SSB_DEV_PCI:
404 case SSB_DEV_PCIE:
405 #ifdef CONFIG_SSB_DRIVER_PCICORE
406 if (bus->bustype == SSB_BUSTYPE_PCI) {
407 /* Ignore PCI cores on PCI-E cards.
408 * Ignore PCI-E cores on PCI cards. */
409 if (dev->id.coreid == SSB_DEV_PCI) {
410 if (bus->host_pci->is_pcie)
411 continue;
412 } else {
413 if (!bus->host_pci->is_pcie)
414 continue;
417 if (bus->pcicore.dev) {
418 ssb_printk(KERN_WARNING PFX
419 "WARNING: Multiple PCI(E) cores found\n");
420 break;
422 bus->pcicore.dev = dev;
423 #endif /* CONFIG_SSB_DRIVER_PCICORE */
424 break;
425 default:
426 break;
429 dev_i++;
431 bus->nr_devices = dev_i;
433 err = 0;
434 out:
435 return err;
436 err_unmap:
437 ssb_iounmap(bus);
438 goto out;