Merge tag 'byteswap-for-linus-20121219' of git://git.infradead.org/users/dwmw2/byteswap
[linux/fpc-iii.git] / include / target / target_core_base.h
blob7cae2360221eb0e32f9e3a19dceaec939ade7296
1 #ifndef TARGET_CORE_BASE_H
2 #define TARGET_CORE_BASE_H
4 #include <linux/in.h>
5 #include <linux/configfs.h>
6 #include <linux/dma-mapping.h>
7 #include <linux/blkdev.h>
8 #include <scsi/scsi_cmnd.h>
9 #include <net/sock.h>
10 #include <net/tcp.h>
12 #define TARGET_CORE_MOD_VERSION "v4.1.0-rc2-ml"
13 #define TARGET_CORE_VERSION TARGET_CORE_MOD_VERSION
15 /* Maximum Number of LUNs per Target Portal Group */
16 /* Don't raise above 511 or REPORT_LUNS needs to handle >1 page */
17 #define TRANSPORT_MAX_LUNS_PER_TPG 256
19 * By default we use 32-byte CDBs in TCM Core and subsystem plugin code.
21 * Note that both include/scsi/scsi_cmnd.h:MAX_COMMAND_SIZE and
22 * include/linux/blkdev.h:BLOCK_MAX_CDB as of v2.6.36-rc4 still use
23 * 16-byte CDBs by default and require an extra allocation for
24 * 32-byte CDBs to because of legacy issues.
26 * Within TCM Core there are no such legacy limitiations, so we go ahead
27 * use 32-byte CDBs by default and use include/scsi/scsi.h:scsi_command_size()
28 * within all TCM Core and subsystem plugin code.
30 #define TCM_MAX_COMMAND_SIZE 32
32 * From include/scsi/scsi_cmnd.h:SCSI_SENSE_BUFFERSIZE, currently
33 * defined 96, but the real limit is 252 (or 260 including the header)
35 #define TRANSPORT_SENSE_BUFFER SCSI_SENSE_BUFFERSIZE
36 /* Used by transport_send_check_condition_and_sense() */
37 #define SPC_SENSE_KEY_OFFSET 2
38 #define SPC_ADD_SENSE_LEN_OFFSET 7
39 #define SPC_ASC_KEY_OFFSET 12
40 #define SPC_ASCQ_KEY_OFFSET 13
41 #define TRANSPORT_IQN_LEN 224
42 /* Used by target_core_store_alua_lu_gp() and target_core_alua_lu_gp_show_attr_members() */
43 #define LU_GROUP_NAME_BUF 256
44 /* Used by core_alua_store_tg_pt_gp_info() and target_core_alua_tg_pt_gp_show_attr_members() */
45 #define TG_PT_GROUP_NAME_BUF 256
46 /* Used to parse VPD into struct t10_vpd */
47 #define VPD_TMP_BUF_SIZE 128
48 /* Used by transport_generic_cmd_sequencer() */
49 #define READ_BLOCK_LEN 6
50 #define READ_CAP_LEN 8
51 #define READ_POSITION_LEN 20
52 #define INQUIRY_LEN 36
53 /* Used by transport_get_inquiry_vpd_serial() */
54 #define INQUIRY_VPD_SERIAL_LEN 254
55 /* Used by transport_get_inquiry_vpd_device_ident() */
56 #define INQUIRY_VPD_DEVICE_IDENTIFIER_LEN 254
58 /* Attempts before moving from SHORT to LONG */
59 #define PYX_TRANSPORT_WINDOW_CLOSED_THRESHOLD 3
60 #define PYX_TRANSPORT_WINDOW_CLOSED_WAIT_SHORT 3 /* In milliseconds */
61 #define PYX_TRANSPORT_WINDOW_CLOSED_WAIT_LONG 10 /* In milliseconds */
63 #define PYX_TRANSPORT_STATUS_INTERVAL 5 /* In seconds */
65 /* struct se_dev_attrib sanity values */
66 /* Default max_unmap_lba_count */
67 #define DA_MAX_UNMAP_LBA_COUNT 0
68 /* Default max_unmap_block_desc_count */
69 #define DA_MAX_UNMAP_BLOCK_DESC_COUNT 0
70 /* Default unmap_granularity */
71 #define DA_UNMAP_GRANULARITY_DEFAULT 0
72 /* Default unmap_granularity_alignment */
73 #define DA_UNMAP_GRANULARITY_ALIGNMENT_DEFAULT 0
74 /* Default max_write_same_len, disabled by default */
75 #define DA_MAX_WRITE_SAME_LEN 0
76 /* Default max transfer length */
77 #define DA_FABRIC_MAX_SECTORS 8192
78 /* Emulation for Direct Page Out */
79 #define DA_EMULATE_DPO 0
80 /* Emulation for Forced Unit Access WRITEs */
81 #define DA_EMULATE_FUA_WRITE 1
82 /* Emulation for Forced Unit Access READs */
83 #define DA_EMULATE_FUA_READ 0
84 /* Emulation for WriteCache and SYNCHRONIZE_CACHE */
85 #define DA_EMULATE_WRITE_CACHE 0
86 /* Emulation for UNIT ATTENTION Interlock Control */
87 #define DA_EMULATE_UA_INTLLCK_CTRL 0
88 /* Emulation for TASK_ABORTED status (TAS) by default */
89 #define DA_EMULATE_TAS 1
90 /* Emulation for Thin Provisioning UNMAP using block/blk-lib.c:blkdev_issue_discard() */
91 #define DA_EMULATE_TPU 0
93 * Emulation for Thin Provisioning WRITE_SAME w/ UNMAP=1 bit using
94 * block/blk-lib.c:blkdev_issue_discard()
96 #define DA_EMULATE_TPWS 0
97 /* No Emulation for PSCSI by default */
98 #define DA_EMULATE_ALUA 0
99 /* Enforce SCSI Initiator Port TransportID with 'ISID' for PR */
100 #define DA_ENFORCE_PR_ISIDS 1
101 #define DA_STATUS_MAX_SECTORS_MIN 16
102 #define DA_STATUS_MAX_SECTORS_MAX 8192
103 /* By default don't report non-rotating (solid state) medium */
104 #define DA_IS_NONROT 0
105 /* Queue Algorithm Modifier default for restricted reordering in control mode page */
106 #define DA_EMULATE_REST_REORD 0
108 #define SE_INQUIRY_BUF 512
109 #define SE_MODE_PAGE_BUF 512
110 #define SE_SENSE_BUF 96
112 /* struct se_hba->hba_flags */
113 enum hba_flags_table {
114 HBA_FLAGS_INTERNAL_USE = 0x01,
115 HBA_FLAGS_PSCSI_MODE = 0x02,
118 /* struct se_lun->lun_status */
119 enum transport_lun_status_table {
120 TRANSPORT_LUN_STATUS_FREE = 0,
121 TRANSPORT_LUN_STATUS_ACTIVE = 1,
124 /* struct se_portal_group->se_tpg_type */
125 enum transport_tpg_type_table {
126 TRANSPORT_TPG_TYPE_NORMAL = 0,
127 TRANSPORT_TPG_TYPE_DISCOVERY = 1,
130 /* Special transport agnostic struct se_cmd->t_states */
131 enum transport_state_table {
132 TRANSPORT_NO_STATE = 0,
133 TRANSPORT_NEW_CMD = 1,
134 TRANSPORT_WRITE_PENDING = 3,
135 TRANSPORT_PROCESSING = 5,
136 TRANSPORT_COMPLETE = 6,
137 TRANSPORT_ISTATE_PROCESSING = 11,
138 TRANSPORT_COMPLETE_QF_WP = 18,
139 TRANSPORT_COMPLETE_QF_OK = 19,
142 /* Used for struct se_cmd->se_cmd_flags */
143 enum se_cmd_flags_table {
144 SCF_SUPPORTED_SAM_OPCODE = 0x00000001,
145 SCF_TRANSPORT_TASK_SENSE = 0x00000002,
146 SCF_EMULATED_TASK_SENSE = 0x00000004,
147 SCF_SCSI_DATA_CDB = 0x00000008,
148 SCF_SCSI_TMR_CDB = 0x00000010,
149 SCF_FUA = 0x00000080,
150 SCF_SE_LUN_CMD = 0x00000100,
151 SCF_BIDI = 0x00000400,
152 SCF_SENT_CHECK_CONDITION = 0x00000800,
153 SCF_OVERFLOW_BIT = 0x00001000,
154 SCF_UNDERFLOW_BIT = 0x00002000,
155 SCF_SENT_DELAYED_TAS = 0x00004000,
156 SCF_ALUA_NON_OPTIMIZED = 0x00008000,
157 SCF_PASSTHROUGH_SG_TO_MEM_NOALLOC = 0x00020000,
158 SCF_ACK_KREF = 0x00040000,
161 /* struct se_dev_entry->lun_flags and struct se_lun->lun_access */
162 enum transport_lunflags_table {
163 TRANSPORT_LUNFLAGS_NO_ACCESS = 0x00,
164 TRANSPORT_LUNFLAGS_INITIATOR_ACCESS = 0x01,
165 TRANSPORT_LUNFLAGS_READ_ONLY = 0x02,
166 TRANSPORT_LUNFLAGS_READ_WRITE = 0x04,
170 * Used by transport_send_check_condition_and_sense()
171 * to signal which ASC/ASCQ sense payload should be built.
173 typedef unsigned __bitwise__ sense_reason_t;
175 enum tcm_sense_reason_table {
176 #define R(x) (__force sense_reason_t )(x)
177 TCM_NON_EXISTENT_LUN = R(0x01),
178 TCM_UNSUPPORTED_SCSI_OPCODE = R(0x02),
179 TCM_INCORRECT_AMOUNT_OF_DATA = R(0x03),
180 TCM_UNEXPECTED_UNSOLICITED_DATA = R(0x04),
181 TCM_SERVICE_CRC_ERROR = R(0x05),
182 TCM_SNACK_REJECTED = R(0x06),
183 TCM_SECTOR_COUNT_TOO_MANY = R(0x07),
184 TCM_INVALID_CDB_FIELD = R(0x08),
185 TCM_INVALID_PARAMETER_LIST = R(0x09),
186 TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE = R(0x0a),
187 TCM_UNKNOWN_MODE_PAGE = R(0x0b),
188 TCM_WRITE_PROTECTED = R(0x0c),
189 TCM_CHECK_CONDITION_ABORT_CMD = R(0x0d),
190 TCM_CHECK_CONDITION_UNIT_ATTENTION = R(0x0e),
191 TCM_CHECK_CONDITION_NOT_READY = R(0x0f),
192 TCM_RESERVATION_CONFLICT = R(0x10),
193 TCM_ADDRESS_OUT_OF_RANGE = R(0x11),
194 TCM_OUT_OF_RESOURCES = R(0x12),
195 #undef R
198 enum target_sc_flags_table {
199 TARGET_SCF_BIDI_OP = 0x01,
200 TARGET_SCF_ACK_KREF = 0x02,
201 TARGET_SCF_UNKNOWN_SIZE = 0x04,
204 /* fabric independent task management function values */
205 enum tcm_tmreq_table {
206 TMR_ABORT_TASK = 1,
207 TMR_ABORT_TASK_SET = 2,
208 TMR_CLEAR_ACA = 3,
209 TMR_CLEAR_TASK_SET = 4,
210 TMR_LUN_RESET = 5,
211 TMR_TARGET_WARM_RESET = 6,
212 TMR_TARGET_COLD_RESET = 7,
213 TMR_FABRIC_TMR = 255,
216 /* fabric independent task management response values */
217 enum tcm_tmrsp_table {
218 TMR_FUNCTION_COMPLETE = 0,
219 TMR_TASK_DOES_NOT_EXIST = 1,
220 TMR_LUN_DOES_NOT_EXIST = 2,
221 TMR_TASK_STILL_ALLEGIANT = 3,
222 TMR_TASK_FAILOVER_NOT_SUPPORTED = 4,
223 TMR_TASK_MGMT_FUNCTION_NOT_SUPPORTED = 5,
224 TMR_FUNCTION_AUTHORIZATION_FAILED = 6,
225 TMR_FUNCTION_REJECTED = 255,
229 * Used for target SCSI statistics
231 typedef enum {
232 SCSI_INST_INDEX,
233 SCSI_DEVICE_INDEX,
234 SCSI_AUTH_INTR_INDEX,
235 SCSI_INDEX_TYPE_MAX
236 } scsi_index_t;
238 struct se_cmd;
240 struct t10_alua {
241 /* ALUA Target Port Group ID */
242 u16 alua_tg_pt_gps_counter;
243 u32 alua_tg_pt_gps_count;
244 spinlock_t tg_pt_gps_lock;
245 struct se_device *t10_dev;
246 /* Used for default ALUA Target Port Group */
247 struct t10_alua_tg_pt_gp *default_tg_pt_gp;
248 /* Used for default ALUA Target Port Group ConfigFS group */
249 struct config_group alua_tg_pt_gps_group;
250 struct list_head tg_pt_gps_list;
253 struct t10_alua_lu_gp {
254 u16 lu_gp_id;
255 int lu_gp_valid_id;
256 u32 lu_gp_members;
257 atomic_t lu_gp_ref_cnt;
258 spinlock_t lu_gp_lock;
259 struct config_group lu_gp_group;
260 struct list_head lu_gp_node;
261 struct list_head lu_gp_mem_list;
264 struct t10_alua_lu_gp_member {
265 bool lu_gp_assoc;
266 atomic_t lu_gp_mem_ref_cnt;
267 spinlock_t lu_gp_mem_lock;
268 struct t10_alua_lu_gp *lu_gp;
269 struct se_device *lu_gp_mem_dev;
270 struct list_head lu_gp_mem_list;
273 struct t10_alua_tg_pt_gp {
274 u16 tg_pt_gp_id;
275 int tg_pt_gp_valid_id;
276 int tg_pt_gp_alua_access_status;
277 int tg_pt_gp_alua_access_type;
278 int tg_pt_gp_nonop_delay_msecs;
279 int tg_pt_gp_trans_delay_msecs;
280 int tg_pt_gp_implict_trans_secs;
281 int tg_pt_gp_pref;
282 int tg_pt_gp_write_metadata;
283 /* Used by struct t10_alua_tg_pt_gp->tg_pt_gp_md_buf_len */
284 #define ALUA_MD_BUF_LEN 1024
285 u32 tg_pt_gp_md_buf_len;
286 u32 tg_pt_gp_members;
287 atomic_t tg_pt_gp_alua_access_state;
288 atomic_t tg_pt_gp_ref_cnt;
289 spinlock_t tg_pt_gp_lock;
290 struct mutex tg_pt_gp_md_mutex;
291 struct se_device *tg_pt_gp_dev;
292 struct config_group tg_pt_gp_group;
293 struct list_head tg_pt_gp_list;
294 struct list_head tg_pt_gp_mem_list;
297 struct t10_alua_tg_pt_gp_member {
298 bool tg_pt_gp_assoc;
299 atomic_t tg_pt_gp_mem_ref_cnt;
300 spinlock_t tg_pt_gp_mem_lock;
301 struct t10_alua_tg_pt_gp *tg_pt_gp;
302 struct se_port *tg_pt;
303 struct list_head tg_pt_gp_mem_list;
306 struct t10_vpd {
307 unsigned char device_identifier[INQUIRY_VPD_DEVICE_IDENTIFIER_LEN];
308 int protocol_identifier_set;
309 u32 protocol_identifier;
310 u32 device_identifier_code_set;
311 u32 association;
312 u32 device_identifier_type;
313 struct list_head vpd_list;
316 struct t10_wwn {
317 char vendor[8];
318 char model[16];
319 char revision[4];
320 char unit_serial[INQUIRY_VPD_SERIAL_LEN];
321 spinlock_t t10_vpd_lock;
322 struct se_device *t10_dev;
323 struct config_group t10_wwn_group;
324 struct list_head t10_vpd_list;
327 struct t10_pr_registration {
328 /* Used for fabrics that contain WWN+ISID */
329 #define PR_REG_ISID_LEN 16
330 /* PR_REG_ISID_LEN + ',i,0x' */
331 #define PR_REG_ISID_ID_LEN (PR_REG_ISID_LEN + 5)
332 char pr_reg_isid[PR_REG_ISID_LEN];
333 /* Used during APTPL metadata reading */
334 #define PR_APTPL_MAX_IPORT_LEN 256
335 unsigned char pr_iport[PR_APTPL_MAX_IPORT_LEN];
336 /* Used during APTPL metadata reading */
337 #define PR_APTPL_MAX_TPORT_LEN 256
338 unsigned char pr_tport[PR_APTPL_MAX_TPORT_LEN];
339 /* For writing out live meta data */
340 unsigned char *pr_aptpl_buf;
341 u16 pr_aptpl_rpti;
342 u16 pr_reg_tpgt;
343 /* Reservation effects all target ports */
344 int pr_reg_all_tg_pt;
345 /* Activate Persistence across Target Power Loss */
346 int pr_reg_aptpl;
347 int pr_res_holder;
348 int pr_res_type;
349 int pr_res_scope;
350 /* Used for fabric initiator WWPNs using a ISID */
351 bool isid_present_at_reg;
352 u32 pr_res_mapped_lun;
353 u32 pr_aptpl_target_lun;
354 u32 pr_res_generation;
355 u64 pr_reg_bin_isid;
356 u64 pr_res_key;
357 atomic_t pr_res_holders;
358 struct se_node_acl *pr_reg_nacl;
359 struct se_dev_entry *pr_reg_deve;
360 struct se_lun *pr_reg_tg_pt_lun;
361 struct list_head pr_reg_list;
362 struct list_head pr_reg_abort_list;
363 struct list_head pr_reg_aptpl_list;
364 struct list_head pr_reg_atp_list;
365 struct list_head pr_reg_atp_mem_list;
368 struct t10_reservation {
369 /* Reservation effects all target ports */
370 int pr_all_tg_pt;
371 /* Activate Persistence across Target Power Loss enabled
372 * for SCSI device */
373 int pr_aptpl_active;
374 /* Used by struct t10_reservation->pr_aptpl_buf_len */
375 #define PR_APTPL_BUF_LEN 8192
376 u32 pr_aptpl_buf_len;
377 u32 pr_generation;
378 spinlock_t registration_lock;
379 spinlock_t aptpl_reg_lock;
381 * This will always be set by one individual I_T Nexus.
382 * However with all_tg_pt=1, other I_T Nexus from the
383 * same initiator can access PR reg/res info on a different
384 * target port.
386 * There is also the 'All Registrants' case, where there is
387 * a single *pr_res_holder of the reservation, but all
388 * registrations are considered reservation holders.
390 struct se_node_acl *pr_res_holder;
391 struct list_head registration_list;
392 struct list_head aptpl_reg_list;
395 struct se_tmr_req {
396 /* Task Management function to be performed */
397 u8 function;
398 /* Task Management response to send */
399 u8 response;
400 int call_transport;
401 /* Reference to ITT that Task Mgmt should be performed */
402 u32 ref_task_tag;
403 void *fabric_tmr_ptr;
404 struct se_cmd *task_cmd;
405 struct se_device *tmr_dev;
406 struct se_lun *tmr_lun;
407 struct list_head tmr_list;
410 struct se_cmd {
411 /* SAM response code being sent to initiator */
412 u8 scsi_status;
413 u8 scsi_asc;
414 u8 scsi_ascq;
415 u16 scsi_sense_length;
416 /* Delay for ALUA Active/NonOptimized state access in milliseconds */
417 int alua_nonop_delay;
418 /* See include/linux/dma-mapping.h */
419 enum dma_data_direction data_direction;
420 /* For SAM Task Attribute */
421 int sam_task_attr;
422 /* Transport protocol dependent state, see transport_state_table */
423 enum transport_state_table t_state;
424 /* Used to signal cmd->se_tfo->check_release_cmd() usage per cmd */
425 unsigned check_release:1;
426 unsigned cmd_wait_set:1;
427 unsigned unknown_data_length:1;
428 /* See se_cmd_flags_table */
429 u32 se_cmd_flags;
430 u32 se_ordered_id;
431 /* Total size in bytes associated with command */
432 u32 data_length;
433 u32 residual_count;
434 u32 orig_fe_lun;
435 /* Persistent Reservation key */
436 u64 pr_res_key;
437 /* Used for sense data */
438 void *sense_buffer;
439 struct list_head se_delayed_node;
440 struct list_head se_lun_node;
441 struct list_head se_qf_node;
442 struct se_device *se_dev;
443 struct se_dev_entry *se_deve;
444 struct se_lun *se_lun;
445 /* Only used for internal passthrough and legacy TCM fabric modules */
446 struct se_session *se_sess;
447 struct se_tmr_req *se_tmr_req;
448 struct list_head se_cmd_list;
449 struct completion cmd_wait_comp;
450 struct kref cmd_kref;
451 struct target_core_fabric_ops *se_tfo;
452 sense_reason_t (*execute_cmd)(struct se_cmd *);
453 void (*transport_complete_callback)(struct se_cmd *);
455 unsigned char *t_task_cdb;
456 unsigned char __t_task_cdb[TCM_MAX_COMMAND_SIZE];
457 unsigned long long t_task_lba;
458 atomic_t t_fe_count;
459 unsigned int transport_state;
460 #define CMD_T_ABORTED (1 << 0)
461 #define CMD_T_ACTIVE (1 << 1)
462 #define CMD_T_COMPLETE (1 << 2)
463 #define CMD_T_QUEUED (1 << 3)
464 #define CMD_T_SENT (1 << 4)
465 #define CMD_T_STOP (1 << 5)
466 #define CMD_T_FAILED (1 << 6)
467 #define CMD_T_LUN_STOP (1 << 7)
468 #define CMD_T_LUN_FE_STOP (1 << 8)
469 #define CMD_T_DEV_ACTIVE (1 << 9)
470 #define CMD_T_REQUEST_STOP (1 << 10)
471 #define CMD_T_BUSY (1 << 11)
472 spinlock_t t_state_lock;
473 struct completion t_transport_stop_comp;
474 struct completion transport_lun_fe_stop_comp;
475 struct completion transport_lun_stop_comp;
477 struct work_struct work;
479 struct scatterlist *t_data_sg;
480 unsigned int t_data_nents;
481 void *t_data_vmap;
482 struct scatterlist *t_bidi_data_sg;
483 unsigned int t_bidi_data_nents;
485 struct list_head state_list;
486 bool state_active;
488 /* old task stop completion, consider merging with some of the above */
489 struct completion task_stop_comp;
491 /* backend private data */
492 void *priv;
495 struct se_ua {
496 u8 ua_asc;
497 u8 ua_ascq;
498 struct se_node_acl *ua_nacl;
499 struct list_head ua_dev_list;
500 struct list_head ua_nacl_list;
503 struct se_node_acl {
504 char initiatorname[TRANSPORT_IQN_LEN];
505 /* Used to signal demo mode created ACL, disabled by default */
506 bool dynamic_node_acl;
507 bool acl_stop:1;
508 u32 queue_depth;
509 u32 acl_index;
510 #define MAX_ACL_TAG_SIZE 64
511 char acl_tag[MAX_ACL_TAG_SIZE];
512 u64 num_cmds;
513 u64 read_bytes;
514 u64 write_bytes;
515 spinlock_t stats_lock;
516 /* Used for PR SPEC_I_PT=1 and REGISTER_AND_MOVE */
517 atomic_t acl_pr_ref_count;
518 struct se_dev_entry **device_list;
519 struct se_session *nacl_sess;
520 struct se_portal_group *se_tpg;
521 spinlock_t device_list_lock;
522 spinlock_t nacl_sess_lock;
523 struct config_group acl_group;
524 struct config_group acl_attrib_group;
525 struct config_group acl_auth_group;
526 struct config_group acl_param_group;
527 struct config_group acl_fabric_stat_group;
528 struct config_group *acl_default_groups[5];
529 struct list_head acl_list;
530 struct list_head acl_sess_list;
531 struct completion acl_free_comp;
532 struct kref acl_kref;
535 struct se_session {
536 unsigned sess_tearing_down:1;
537 u64 sess_bin_isid;
538 struct se_node_acl *se_node_acl;
539 struct se_portal_group *se_tpg;
540 void *fabric_sess_ptr;
541 struct list_head sess_list;
542 struct list_head sess_acl_list;
543 struct list_head sess_cmd_list;
544 spinlock_t sess_cmd_lock;
545 struct kref sess_kref;
548 struct se_device;
549 struct se_transform_info;
550 struct scatterlist;
552 struct se_ml_stat_grps {
553 struct config_group stat_group;
554 struct config_group scsi_auth_intr_group;
555 struct config_group scsi_att_intr_port_group;
558 struct se_lun_acl {
559 char initiatorname[TRANSPORT_IQN_LEN];
560 u32 mapped_lun;
561 struct se_node_acl *se_lun_nacl;
562 struct se_lun *se_lun;
563 struct list_head lacl_list;
564 struct config_group se_lun_group;
565 struct se_ml_stat_grps ml_stat_grps;
568 struct se_dev_entry {
569 bool def_pr_registered;
570 /* See transport_lunflags_table */
571 u32 lun_flags;
572 u32 deve_cmds;
573 u32 mapped_lun;
574 u32 average_bytes;
575 u32 last_byte_count;
576 u32 total_cmds;
577 u32 total_bytes;
578 u64 pr_res_key;
579 u64 creation_time;
580 u32 attach_count;
581 u64 read_bytes;
582 u64 write_bytes;
583 atomic_t ua_count;
584 /* Used for PR SPEC_I_PT=1 and REGISTER_AND_MOVE */
585 atomic_t pr_ref_count;
586 struct se_lun_acl *se_lun_acl;
587 spinlock_t ua_lock;
588 struct se_lun *se_lun;
589 struct list_head alua_port_list;
590 struct list_head ua_list;
593 struct se_dev_attrib {
594 int emulate_dpo;
595 int emulate_fua_write;
596 int emulate_fua_read;
597 int emulate_write_cache;
598 int emulate_ua_intlck_ctrl;
599 int emulate_tas;
600 int emulate_tpu;
601 int emulate_tpws;
602 int enforce_pr_isids;
603 int is_nonrot;
604 int emulate_rest_reord;
605 u32 hw_block_size;
606 u32 block_size;
607 u32 hw_max_sectors;
608 u32 fabric_max_sectors;
609 u32 optimal_sectors;
610 u32 hw_queue_depth;
611 u32 queue_depth;
612 u32 max_unmap_lba_count;
613 u32 max_unmap_block_desc_count;
614 u32 unmap_granularity;
615 u32 unmap_granularity_alignment;
616 u32 max_write_same_len;
617 struct se_device *da_dev;
618 struct config_group da_group;
621 struct se_dev_stat_grps {
622 struct config_group stat_group;
623 struct config_group scsi_dev_group;
624 struct config_group scsi_tgt_dev_group;
625 struct config_group scsi_lu_group;
628 struct se_device {
629 #define SE_DEV_LINK_MAGIC 0xfeeddeef
630 u32 dev_link_magic;
631 /* RELATIVE TARGET PORT IDENTIFER Counter */
632 u16 dev_rpti_counter;
633 /* Used for SAM Task Attribute ordering */
634 u32 dev_cur_ordered_id;
635 u32 dev_flags;
636 #define DF_CONFIGURED 0x00000001
637 #define DF_FIRMWARE_VPD_UNIT_SERIAL 0x00000002
638 #define DF_EMULATED_VPD_UNIT_SERIAL 0x00000004
639 #define DF_USING_UDEV_PATH 0x00000008
640 #define DF_USING_ALIAS 0x00000010
641 u32 dev_port_count;
642 /* Physical device queue depth */
643 u32 queue_depth;
644 /* Used for SPC-2 reservations enforce of ISIDs */
645 u64 dev_res_bin_isid;
646 /* Pointer to transport specific device structure */
647 u32 dev_index;
648 u64 creation_time;
649 u32 num_resets;
650 u64 num_cmds;
651 u64 read_bytes;
652 u64 write_bytes;
653 spinlock_t stats_lock;
654 /* Active commands on this virtual SE device */
655 atomic_t simple_cmds;
656 atomic_t dev_ordered_id;
657 atomic_t dev_ordered_sync;
658 atomic_t dev_qf_count;
659 int export_count;
660 spinlock_t delayed_cmd_lock;
661 spinlock_t execute_task_lock;
662 spinlock_t dev_reservation_lock;
663 unsigned int dev_reservation_flags;
664 #define DRF_SPC2_RESERVATIONS 0x00000001
665 #define DRF_SPC2_RESERVATIONS_WITH_ISID 0x00000002
666 spinlock_t se_port_lock;
667 spinlock_t se_tmr_lock;
668 spinlock_t qf_cmd_lock;
669 /* Used for legacy SPC-2 reservationsa */
670 struct se_node_acl *dev_reserved_node_acl;
671 /* Used for ALUA Logical Unit Group membership */
672 struct t10_alua_lu_gp_member *dev_alua_lu_gp_mem;
673 /* Used for SPC-3 Persistent Reservations */
674 struct t10_pr_registration *dev_pr_res_holder;
675 struct list_head dev_sep_list;
676 struct list_head dev_tmr_list;
677 struct workqueue_struct *tmr_wq;
678 struct work_struct qf_work_queue;
679 struct list_head delayed_cmd_list;
680 struct list_head state_list;
681 struct list_head qf_cmd_list;
682 /* Pointer to associated SE HBA */
683 struct se_hba *se_hba;
684 /* T10 Inquiry and VPD WWN Information */
685 struct t10_wwn t10_wwn;
686 /* T10 Asymmetric Logical Unit Assignment for Target Ports */
687 struct t10_alua t10_alua;
688 /* T10 SPC-2 + SPC-3 Reservations */
689 struct t10_reservation t10_pr;
690 struct se_dev_attrib dev_attrib;
691 struct config_group dev_group;
692 struct config_group dev_pr_group;
693 struct se_dev_stat_grps dev_stat_grps;
694 #define SE_DEV_ALIAS_LEN 512 /* must be less than PAGE_SIZE */
695 unsigned char dev_alias[SE_DEV_ALIAS_LEN];
696 #define SE_UDEV_PATH_LEN 512 /* must be less than PAGE_SIZE */
697 unsigned char udev_path[SE_UDEV_PATH_LEN];
698 /* Pointer to template of function pointers for transport */
699 struct se_subsystem_api *transport;
700 /* Linked list for struct se_hba struct se_device list */
701 struct list_head dev_list;
704 struct se_hba {
705 u16 hba_tpgt;
706 u32 hba_id;
707 /* See hba_flags_table */
708 u32 hba_flags;
709 /* Virtual iSCSI devices attached. */
710 u32 dev_count;
711 u32 hba_index;
712 /* Pointer to transport specific host structure. */
713 void *hba_ptr;
714 struct list_head hba_node;
715 spinlock_t device_lock;
716 struct config_group hba_group;
717 struct mutex hba_access_mutex;
718 struct se_subsystem_api *transport;
721 struct se_port_stat_grps {
722 struct config_group stat_group;
723 struct config_group scsi_port_group;
724 struct config_group scsi_tgt_port_group;
725 struct config_group scsi_transport_group;
728 struct se_lun {
729 #define SE_LUN_LINK_MAGIC 0xffff7771
730 u32 lun_link_magic;
731 /* See transport_lun_status_table */
732 enum transport_lun_status_table lun_status;
733 u32 lun_access;
734 u32 lun_flags;
735 u32 unpacked_lun;
736 atomic_t lun_acl_count;
737 spinlock_t lun_acl_lock;
738 spinlock_t lun_cmd_lock;
739 spinlock_t lun_sep_lock;
740 struct completion lun_shutdown_comp;
741 struct list_head lun_cmd_list;
742 struct list_head lun_acl_list;
743 struct se_device *lun_se_dev;
744 struct se_port *lun_sep;
745 struct config_group lun_group;
746 struct se_port_stat_grps port_stat_grps;
749 struct scsi_port_stats {
750 u64 cmd_pdus;
751 u64 tx_data_octets;
752 u64 rx_data_octets;
755 struct se_port {
756 /* RELATIVE TARGET PORT IDENTIFER */
757 u16 sep_rtpi;
758 int sep_tg_pt_secondary_stat;
759 int sep_tg_pt_secondary_write_md;
760 u32 sep_index;
761 struct scsi_port_stats sep_stats;
762 /* Used for ALUA Target Port Groups membership */
763 atomic_t sep_tg_pt_secondary_offline;
764 /* Used for PR ALL_TG_PT=1 */
765 atomic_t sep_tg_pt_ref_cnt;
766 spinlock_t sep_alua_lock;
767 struct mutex sep_tg_pt_md_mutex;
768 struct t10_alua_tg_pt_gp_member *sep_alua_tg_pt_gp_mem;
769 struct se_lun *sep_lun;
770 struct se_portal_group *sep_tpg;
771 struct list_head sep_alua_list;
772 struct list_head sep_list;
775 struct se_tpg_np {
776 struct se_portal_group *tpg_np_parent;
777 struct config_group tpg_np_group;
780 struct se_portal_group {
781 /* Type of target portal group, see transport_tpg_type_table */
782 enum transport_tpg_type_table se_tpg_type;
783 /* Number of ACLed Initiator Nodes for this TPG */
784 u32 num_node_acls;
785 /* Used for PR SPEC_I_PT=1 and REGISTER_AND_MOVE */
786 atomic_t tpg_pr_ref_count;
787 /* Spinlock for adding/removing ACLed Nodes */
788 spinlock_t acl_node_lock;
789 /* Spinlock for adding/removing sessions */
790 spinlock_t session_lock;
791 spinlock_t tpg_lun_lock;
792 /* Pointer to $FABRIC_MOD portal group */
793 void *se_tpg_fabric_ptr;
794 struct list_head se_tpg_node;
795 /* linked list for initiator ACL list */
796 struct list_head acl_node_list;
797 struct se_lun **tpg_lun_list;
798 struct se_lun tpg_virt_lun0;
799 /* List of TCM sessions associated wth this TPG */
800 struct list_head tpg_sess_list;
801 /* Pointer to $FABRIC_MOD dependent code */
802 struct target_core_fabric_ops *se_tpg_tfo;
803 struct se_wwn *se_tpg_wwn;
804 struct config_group tpg_group;
805 struct config_group *tpg_default_groups[6];
806 struct config_group tpg_lun_group;
807 struct config_group tpg_np_group;
808 struct config_group tpg_acl_group;
809 struct config_group tpg_attrib_group;
810 struct config_group tpg_param_group;
813 struct se_wwn {
814 struct target_fabric_configfs *wwn_tf;
815 struct config_group wwn_group;
816 struct config_group *wwn_default_groups[2];
817 struct config_group fabric_stat_group;
820 #endif /* TARGET_CORE_BASE_H */