2 * OMAP7xx SPI 100k controller driver
3 * Author: Fabrice Crohas <fcrohas@gmail.com>
4 * from original omap1_mcspi driver
6 * Copyright (C) 2005, 2006 Nokia Corporation
7 * Author: Samuel Ortiz <samuel.ortiz@nokia.com> and
8 * Juha Yrj�l� <juha.yrjola@nokia.com>
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License as published by
12 * the Free Software Foundation; either version 2 of the License, or
13 * (at your option) any later version.
15 * This program is distributed in the hope that it will be useful,
16 * but WITHOUT ANY WARRANTY; without even the implied warranty of
17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
18 * GNU General Public License for more details.
20 * You should have received a copy of the GNU General Public License
21 * along with this program; if not, write to the Free Software
22 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
25 #include <linux/kernel.h>
26 #include <linux/init.h>
27 #include <linux/interrupt.h>
28 #include <linux/module.h>
29 #include <linux/device.h>
30 #include <linux/delay.h>
31 #include <linux/platform_device.h>
32 #include <linux/err.h>
33 #include <linux/clk.h>
35 #include <linux/gpio.h>
36 #include <linux/slab.h>
38 #include <linux/spi/spi.h>
40 #define OMAP1_SPI100K_MAX_FREQ 48000000
42 #define ICR_SPITAS (OMAP7XX_ICR_BASE + 0x12)
44 #define SPI_SETUP1 0x00
45 #define SPI_SETUP2 0x02
47 #define SPI_STATUS 0x06
48 #define SPI_TX_LSB 0x08
49 #define SPI_TX_MSB 0x0a
50 #define SPI_RX_LSB 0x0c
51 #define SPI_RX_MSB 0x0e
53 #define SPI_SETUP1_INT_READ_ENABLE (1UL << 5)
54 #define SPI_SETUP1_INT_WRITE_ENABLE (1UL << 4)
55 #define SPI_SETUP1_CLOCK_DIVISOR(x) ((x) << 1)
56 #define SPI_SETUP1_CLOCK_ENABLE (1UL << 0)
58 #define SPI_SETUP2_ACTIVE_EDGE_FALLING (0UL << 0)
59 #define SPI_SETUP2_ACTIVE_EDGE_RISING (1UL << 0)
60 #define SPI_SETUP2_NEGATIVE_LEVEL (0UL << 5)
61 #define SPI_SETUP2_POSITIVE_LEVEL (1UL << 5)
62 #define SPI_SETUP2_LEVEL_TRIGGER (0UL << 10)
63 #define SPI_SETUP2_EDGE_TRIGGER (1UL << 10)
65 #define SPI_CTRL_SEN(x) ((x) << 7)
66 #define SPI_CTRL_WORD_SIZE(x) (((x) - 1) << 2)
67 #define SPI_CTRL_WR (1UL << 1)
68 #define SPI_CTRL_RD (1UL << 0)
70 #define SPI_STATUS_WE (1UL << 1)
71 #define SPI_STATUS_RD (1UL << 0)
77 /* use PIO for small transfers, avoiding DMA setup/teardown overhead and
78 * cache operations; better heuristics consider wordsize and bitrate.
80 #define DMA_MIN_BYTES 8
83 #define SPI_SHUTDOWN 1
85 struct omap1_spi100k
{
86 struct work_struct work
;
88 /* lock protects queue and registers */
90 struct list_head msg_queue
;
91 struct spi_master
*master
;
95 /* Virtual base address of the controller */
98 /* State of the SPI */
102 struct omap1_spi100k_cs
{
107 static struct workqueue_struct
*omap1_spi100k_wq
;
109 #define MOD_REG_BIT(val, mask, set) do { \
116 static void spi100k_enable_clock(struct spi_master
*master
)
119 struct omap1_spi100k
*spi100k
= spi_master_get_devdata(master
);
122 val
= readw(spi100k
->base
+ SPI_SETUP1
);
123 val
|= SPI_SETUP1_CLOCK_ENABLE
;
124 writew(val
, spi100k
->base
+ SPI_SETUP1
);
127 static void spi100k_disable_clock(struct spi_master
*master
)
130 struct omap1_spi100k
*spi100k
= spi_master_get_devdata(master
);
133 val
= readw(spi100k
->base
+ SPI_SETUP1
);
134 val
&= ~SPI_SETUP1_CLOCK_ENABLE
;
135 writew(val
, spi100k
->base
+ SPI_SETUP1
);
138 static void spi100k_write_data(struct spi_master
*master
, int len
, int data
)
140 struct omap1_spi100k
*spi100k
= spi_master_get_devdata(master
);
142 /* write 16-bit word, shifting 8-bit data if necessary */
148 spi100k_enable_clock(master
);
149 writew( data
, spi100k
->base
+ SPI_TX_MSB
);
151 writew(SPI_CTRL_SEN(0) |
152 SPI_CTRL_WORD_SIZE(len
) |
154 spi100k
->base
+ SPI_CTRL
);
156 /* Wait for bit ack send change */
157 while((readw(spi100k
->base
+ SPI_STATUS
) & SPI_STATUS_WE
) != SPI_STATUS_WE
);
160 spi100k_disable_clock(master
);
163 static int spi100k_read_data(struct spi_master
*master
, int len
)
166 struct omap1_spi100k
*spi100k
= spi_master_get_devdata(master
);
168 /* Always do at least 16 bits */
172 spi100k_enable_clock(master
);
173 writew(SPI_CTRL_SEN(0) |
174 SPI_CTRL_WORD_SIZE(len
) |
176 spi100k
->base
+ SPI_CTRL
);
178 while((readw(spi100k
->base
+ SPI_STATUS
) & SPI_STATUS_RD
) != SPI_STATUS_RD
);
181 dataL
= readw(spi100k
->base
+ SPI_RX_LSB
);
182 dataH
= readw(spi100k
->base
+ SPI_RX_MSB
);
183 spi100k_disable_clock(master
);
188 static void spi100k_open(struct spi_master
*master
)
190 /* get control of SPI */
191 struct omap1_spi100k
*spi100k
= spi_master_get_devdata(master
);
193 writew(SPI_SETUP1_INT_READ_ENABLE
|
194 SPI_SETUP1_INT_WRITE_ENABLE
|
195 SPI_SETUP1_CLOCK_DIVISOR(0), spi100k
->base
+ SPI_SETUP1
);
197 /* configure clock and interrupts */
198 writew(SPI_SETUP2_ACTIVE_EDGE_FALLING
|
199 SPI_SETUP2_NEGATIVE_LEVEL
|
200 SPI_SETUP2_LEVEL_TRIGGER
, spi100k
->base
+ SPI_SETUP2
);
203 static void omap1_spi100k_force_cs(struct omap1_spi100k
*spi100k
, int enable
)
206 writew(0x05fc, spi100k
->base
+ SPI_CTRL
);
208 writew(0x05fd, spi100k
->base
+ SPI_CTRL
);
212 omap1_spi100k_txrx_pio(struct spi_device
*spi
, struct spi_transfer
*xfer
)
214 struct omap1_spi100k
*spi100k
;
215 struct omap1_spi100k_cs
*cs
= spi
->controller_state
;
216 unsigned int count
, c
;
219 spi100k
= spi_master_get_devdata(spi
->master
);
222 word_len
= cs
->word_len
;
232 if (xfer
->tx_buf
!= NULL
)
233 spi100k_write_data(spi
->master
, word_len
, *tx
++);
234 if (xfer
->rx_buf
!= NULL
)
235 *rx
++ = spi100k_read_data(spi
->master
, word_len
);
237 } else if (word_len
<= 16) {
245 if (xfer
->tx_buf
!= NULL
)
246 spi100k_write_data(spi
->master
,word_len
, *tx
++);
247 if (xfer
->rx_buf
!= NULL
)
248 *rx
++ = spi100k_read_data(spi
->master
,word_len
);
250 } else if (word_len
<= 32) {
258 if (xfer
->tx_buf
!= NULL
)
259 spi100k_write_data(spi
->master
,word_len
, *tx
);
260 if (xfer
->rx_buf
!= NULL
)
261 *rx
= spi100k_read_data(spi
->master
,word_len
);
267 /* called only when no transfer is active to this device */
268 static int omap1_spi100k_setup_transfer(struct spi_device
*spi
,
269 struct spi_transfer
*t
)
271 struct omap1_spi100k
*spi100k
= spi_master_get_devdata(spi
->master
);
272 struct omap1_spi100k_cs
*cs
= spi
->controller_state
;
273 u8 word_len
= spi
->bits_per_word
;
275 if (t
!= NULL
&& t
->bits_per_word
)
276 word_len
= t
->bits_per_word
;
280 if (spi
->bits_per_word
> 32)
282 cs
->word_len
= word_len
;
284 /* SPI init before transfer */
285 writew(0x3e , spi100k
->base
+ SPI_SETUP1
);
286 writew(0x00 , spi100k
->base
+ SPI_STATUS
);
287 writew(0x3e , spi100k
->base
+ SPI_CTRL
);
292 /* the spi->mode bits understood by this driver: */
293 #define MODEBITS (SPI_CPOL | SPI_CPHA | SPI_CS_HIGH)
295 static int omap1_spi100k_setup(struct spi_device
*spi
)
298 struct omap1_spi100k
*spi100k
;
299 struct omap1_spi100k_cs
*cs
= spi
->controller_state
;
301 if (spi
->bits_per_word
< 4 || spi
->bits_per_word
> 32) {
302 dev_dbg(&spi
->dev
, "setup: unsupported %d bit words\n",
307 spi100k
= spi_master_get_devdata(spi
->master
);
310 cs
= kzalloc(sizeof *cs
, GFP_KERNEL
);
313 cs
->base
= spi100k
->base
+ spi
->chip_select
* 0x14;
314 spi
->controller_state
= cs
;
317 spi100k_open(spi
->master
);
319 clk_enable(spi100k
->ick
);
320 clk_enable(spi100k
->fck
);
322 ret
= omap1_spi100k_setup_transfer(spi
, NULL
);
324 clk_disable(spi100k
->ick
);
325 clk_disable(spi100k
->fck
);
330 static void omap1_spi100k_work(struct work_struct
*work
)
332 struct omap1_spi100k
*spi100k
;
335 spi100k
= container_of(work
, struct omap1_spi100k
, work
);
336 spin_lock_irq(&spi100k
->lock
);
338 clk_enable(spi100k
->ick
);
339 clk_enable(spi100k
->fck
);
341 /* We only enable one channel at a time -- the one whose message is
342 * at the head of the queue -- although this controller would gladly
343 * arbitrate among multiple channels. This corresponds to "single
344 * channel" master mode. As a side effect, we need to manage the
345 * chipselect with the FORCE bit ... CS != channel enable.
347 while (!list_empty(&spi100k
->msg_queue
)) {
348 struct spi_message
*m
;
349 struct spi_device
*spi
;
350 struct spi_transfer
*t
= NULL
;
352 struct omap1_spi100k_cs
*cs
;
353 int par_override
= 0;
355 m
= container_of(spi100k
->msg_queue
.next
, struct spi_message
,
358 list_del_init(&m
->queue
);
359 spin_unlock_irq(&spi100k
->lock
);
362 cs
= spi
->controller_state
;
364 list_for_each_entry(t
, &m
->transfers
, transfer_list
) {
365 if (t
->tx_buf
== NULL
&& t
->rx_buf
== NULL
&& t
->len
) {
369 if (par_override
|| t
->speed_hz
|| t
->bits_per_word
) {
371 status
= omap1_spi100k_setup_transfer(spi
, t
);
374 if (!t
->speed_hz
&& !t
->bits_per_word
)
379 omap1_spi100k_force_cs(spi100k
, 1);
386 count
= omap1_spi100k_txrx_pio(spi
, t
);
387 m
->actual_length
+= count
;
389 if (count
!= t
->len
) {
396 udelay(t
->delay_usecs
);
398 /* ignore the "leave it on after last xfer" hint */
401 omap1_spi100k_force_cs(spi100k
, 0);
406 /* Restore defaults if they were overriden */
409 status
= omap1_spi100k_setup_transfer(spi
, NULL
);
413 omap1_spi100k_force_cs(spi100k
, 0);
416 m
->complete(m
->context
);
418 spin_lock_irq(&spi100k
->lock
);
421 clk_disable(spi100k
->ick
);
422 clk_disable(spi100k
->fck
);
423 spin_unlock_irq(&spi100k
->lock
);
426 printk(KERN_WARNING
"spi transfer failed with %d\n", status
);
429 static int omap1_spi100k_transfer(struct spi_device
*spi
, struct spi_message
*m
)
431 struct omap1_spi100k
*spi100k
;
433 struct spi_transfer
*t
;
435 m
->actual_length
= 0;
436 m
->status
= -EINPROGRESS
;
438 spi100k
= spi_master_get_devdata(spi
->master
);
440 /* Don't accept new work if we're shutting down */
441 if (spi100k
->state
== SPI_SHUTDOWN
)
444 /* reject invalid messages and transfers */
445 if (list_empty(&m
->transfers
) || !m
->complete
)
448 list_for_each_entry(t
, &m
->transfers
, transfer_list
) {
449 const void *tx_buf
= t
->tx_buf
;
450 void *rx_buf
= t
->rx_buf
;
451 unsigned len
= t
->len
;
453 if (t
->speed_hz
> OMAP1_SPI100K_MAX_FREQ
454 || (len
&& !(rx_buf
|| tx_buf
))
455 || (t
->bits_per_word
&&
456 ( t
->bits_per_word
< 4
457 || t
->bits_per_word
> 32))) {
458 dev_dbg(&spi
->dev
, "transfer: %d Hz, %d %s%s, %d bpw\n",
467 if (t
->speed_hz
&& t
->speed_hz
< OMAP1_SPI100K_MAX_FREQ
/(1<<16)) {
468 dev_dbg(&spi
->dev
, "%d Hz max exceeds %d\n",
470 OMAP1_SPI100K_MAX_FREQ
/(1<<16));
476 spin_lock_irqsave(&spi100k
->lock
, flags
);
477 list_add_tail(&m
->queue
, &spi100k
->msg_queue
);
478 queue_work(omap1_spi100k_wq
, &spi100k
->work
);
479 spin_unlock_irqrestore(&spi100k
->lock
, flags
);
484 static int __init
omap1_spi100k_reset(struct omap1_spi100k
*spi100k
)
489 static int omap1_spi100k_probe(struct platform_device
*pdev
)
491 struct spi_master
*master
;
492 struct omap1_spi100k
*spi100k
;
498 master
= spi_alloc_master(&pdev
->dev
, sizeof *spi100k
);
499 if (master
== NULL
) {
500 dev_dbg(&pdev
->dev
, "master allocation failed\n");
505 master
->bus_num
= pdev
->id
;
507 master
->setup
= omap1_spi100k_setup
;
508 master
->transfer
= omap1_spi100k_transfer
;
509 master
->cleanup
= NULL
;
510 master
->num_chipselect
= 2;
511 master
->mode_bits
= MODEBITS
;
513 dev_set_drvdata(&pdev
->dev
, master
);
515 spi100k
= spi_master_get_devdata(master
);
516 spi100k
->master
= master
;
519 * The memory region base address is taken as the platform_data.
520 * You should allocate this with ioremap() before initializing
523 spi100k
->base
= (void __iomem
*) pdev
->dev
.platform_data
;
525 INIT_WORK(&spi100k
->work
, omap1_spi100k_work
);
527 spin_lock_init(&spi100k
->lock
);
528 INIT_LIST_HEAD(&spi100k
->msg_queue
);
529 spi100k
->ick
= clk_get(&pdev
->dev
, "ick");
530 if (IS_ERR(spi100k
->ick
)) {
531 dev_dbg(&pdev
->dev
, "can't get spi100k_ick\n");
532 status
= PTR_ERR(spi100k
->ick
);
536 spi100k
->fck
= clk_get(&pdev
->dev
, "fck");
537 if (IS_ERR(spi100k
->fck
)) {
538 dev_dbg(&pdev
->dev
, "can't get spi100k_fck\n");
539 status
= PTR_ERR(spi100k
->fck
);
543 if (omap1_spi100k_reset(spi100k
) < 0)
546 status
= spi_register_master(master
);
550 spi100k
->state
= SPI_RUNNING
;
555 clk_put(spi100k
->fck
);
557 clk_put(spi100k
->ick
);
559 spi_master_put(master
);
563 static int __exit
omap1_spi100k_remove(struct platform_device
*pdev
)
565 struct spi_master
*master
;
566 struct omap1_spi100k
*spi100k
;
568 unsigned limit
= 500;
572 master
= dev_get_drvdata(&pdev
->dev
);
573 spi100k
= spi_master_get_devdata(master
);
575 spin_lock_irqsave(&spi100k
->lock
, flags
);
577 spi100k
->state
= SPI_SHUTDOWN
;
578 while (!list_empty(&spi100k
->msg_queue
) && limit
--) {
579 spin_unlock_irqrestore(&spi100k
->lock
, flags
);
581 spin_lock_irqsave(&spi100k
->lock
, flags
);
584 if (!list_empty(&spi100k
->msg_queue
))
587 spin_unlock_irqrestore(&spi100k
->lock
, flags
);
592 clk_put(spi100k
->fck
);
593 clk_put(spi100k
->ick
);
595 r
= platform_get_resource(pdev
, IORESOURCE_MEM
, 0);
597 spi_unregister_master(master
);
602 static struct platform_driver omap1_spi100k_driver
= {
604 .name
= "omap1_spi100k",
605 .owner
= THIS_MODULE
,
607 .remove
= __exit_p(omap1_spi100k_remove
),
611 static int __init
omap1_spi100k_init(void)
613 omap1_spi100k_wq
= create_singlethread_workqueue(
614 omap1_spi100k_driver
.driver
.name
);
616 if (omap1_spi100k_wq
== NULL
)
619 return platform_driver_probe(&omap1_spi100k_driver
, omap1_spi100k_probe
);
622 static void __exit
omap1_spi100k_exit(void)
624 platform_driver_unregister(&omap1_spi100k_driver
);
626 destroy_workqueue(omap1_spi100k_wq
);
629 module_init(omap1_spi100k_init
);
630 module_exit(omap1_spi100k_exit
);
632 MODULE_DESCRIPTION("OMAP7xx SPI 100k controller driver");
633 MODULE_AUTHOR("Fabrice Crohas <fcrohas@gmail.com>");
634 MODULE_LICENSE("GPL");