1 #include <linux/suspend.h>
2 #include <linux/suspend_ioctls.h>
3 #include <linux/utsname.h>
4 #include <linux/freezer.h>
5 #include <linux/compiler.h>
8 struct new_utsname uts
;
10 unsigned long num_physpages
;
12 unsigned long image_pages
;
15 } __aligned(PAGE_SIZE
);
17 #ifdef CONFIG_HIBERNATION
18 /* kernel/power/snapshot.c */
19 extern void __init
hibernate_reserved_size_init(void);
20 extern void __init
hibernate_image_size_init(void);
22 #ifdef CONFIG_ARCH_HIBERNATION_HEADER
23 /* Maximum size of architecture specific data in a hibernation header */
24 #define MAX_ARCH_HEADER_SIZE (sizeof(struct new_utsname) + 4)
26 extern int arch_hibernation_header_save(void *addr
, unsigned int max_size
);
27 extern int arch_hibernation_header_restore(void *addr
);
29 static inline int init_header_complete(struct swsusp_info
*info
)
31 return arch_hibernation_header_save(info
, MAX_ARCH_HEADER_SIZE
);
34 static inline char *check_image_kernel(struct swsusp_info
*info
)
36 return arch_hibernation_header_restore(info
) ?
37 "architecture specific data" : NULL
;
39 #endif /* CONFIG_ARCH_HIBERNATION_HEADER */
41 extern int hibernate_resume_nonboot_cpu_disable(void);
44 * Keep some memory free so that I/O operations can succeed without paging
45 * [Might this be more than 4 MB?]
47 #define PAGES_FOR_IO ((4096 * 1024) >> PAGE_SHIFT)
50 * Keep 1 MB of memory free so that device drivers can allocate some pages in
51 * their .suspend() routines without breaking the suspend to disk.
53 #define SPARE_PAGES ((1024 * 1024) >> PAGE_SHIFT)
55 asmlinkage
int swsusp_save(void);
57 /* kernel/power/hibernate.c */
58 extern bool freezer_test_done
;
60 extern int hibernation_snapshot(int platform_mode
);
61 extern int hibernation_restore(int platform_mode
);
62 extern int hibernation_platform_enter(void);
64 #ifdef CONFIG_STRICT_KERNEL_RWX
65 /* kernel/power/snapshot.c */
66 extern void enable_restore_image_protection(void);
68 static inline void enable_restore_image_protection(void) {}
69 #endif /* CONFIG_STRICT_KERNEL_RWX */
71 #else /* !CONFIG_HIBERNATION */
73 static inline void hibernate_reserved_size_init(void) {}
74 static inline void hibernate_image_size_init(void) {}
75 #endif /* !CONFIG_HIBERNATION */
77 extern int pfn_is_nosave(unsigned long);
79 #define power_attr(_name) \
80 static struct kobj_attribute _name##_attr = { \
82 .name = __stringify(_name), \
85 .show = _name##_show, \
86 .store = _name##_store, \
89 #define power_attr_ro(_name) \
90 static struct kobj_attribute _name##_attr = { \
92 .name = __stringify(_name), \
95 .show = _name##_show, \
98 /* Preferred image size in bytes (default 500 MB) */
99 extern unsigned long image_size
;
100 /* Size of memory reserved for drivers (default SPARE_PAGES x PAGE_SIZE) */
101 extern unsigned long reserved_size
;
102 extern int in_suspend
;
103 extern dev_t swsusp_resume_device
;
104 extern sector_t swsusp_resume_block
;
106 extern asmlinkage
int swsusp_arch_suspend(void);
107 extern asmlinkage
int swsusp_arch_resume(void);
109 extern int create_basic_memory_bitmaps(void);
110 extern void free_basic_memory_bitmaps(void);
111 extern int hibernate_preallocate_memory(void);
113 extern void clear_free_pages(void);
116 * Auxiliary structure used for reading the snapshot image data and
117 * metadata from and writing them to the list of page backup entries
118 * (PBEs) which is the main data structure of swsusp.
120 * Using struct snapshot_handle we can transfer the image, including its
121 * metadata, as a continuous sequence of bytes with the help of
122 * snapshot_read_next() and snapshot_write_next().
124 * The code that writes the image to a storage or transfers it to
125 * the user land is required to use snapshot_read_next() for this
126 * purpose and it should not make any assumptions regarding the internal
127 * structure of the image. Similarly, the code that reads the image from
128 * a storage or transfers it from the user land is required to use
129 * snapshot_write_next().
131 * This may allow us to change the internal structure of the image
132 * in the future with considerably less effort.
135 struct snapshot_handle
{
136 unsigned int cur
; /* number of the block of PAGE_SIZE bytes the
137 * next operation will refer to (ie. current)
139 void *buffer
; /* address of the block to read from
142 int sync_read
; /* Set to one to notify the caller of
143 * snapshot_write_next() that it may
144 * need to call wait_on_bio_chain()
148 /* This macro returns the address from/to which the caller of
149 * snapshot_read_next()/snapshot_write_next() is allowed to
150 * read/write data after the function returns
152 #define data_of(handle) ((handle).buffer)
154 extern unsigned int snapshot_additional_pages(struct zone
*zone
);
155 extern unsigned long snapshot_get_image_size(void);
156 extern int snapshot_read_next(struct snapshot_handle
*handle
);
157 extern int snapshot_write_next(struct snapshot_handle
*handle
);
158 extern void snapshot_write_finalize(struct snapshot_handle
*handle
);
159 extern int snapshot_image_loaded(struct snapshot_handle
*handle
);
161 /* If unset, the snapshot device cannot be open. */
162 extern atomic_t snapshot_device_available
;
164 extern sector_t
alloc_swapdev_block(int swap
);
165 extern void free_all_swap_pages(int swap
);
166 extern int swsusp_swap_in_use(void);
169 * Flags that can be passed from the hibernatig hernel to the "boot" kernel in
172 #define SF_PLATFORM_MODE 1
173 #define SF_NOCOMPRESS_MODE 2
174 #define SF_CRC32_MODE 4
176 /* kernel/power/hibernate.c */
177 extern int swsusp_check(void);
178 extern void swsusp_free(void);
179 extern int swsusp_read(unsigned int *flags_p
);
180 extern int swsusp_write(unsigned int flags
);
181 extern void swsusp_close(fmode_t
);
182 #ifdef CONFIG_SUSPEND
183 extern int swsusp_unmark(void);
187 /* kernel/power/swsusp.c */
188 extern void swsusp_show_speed(ktime_t
, ktime_t
, unsigned int, char *);
190 #ifdef CONFIG_SUSPEND
191 /* kernel/power/suspend.c */
192 extern const char * const pm_labels
[];
193 extern const char *pm_states
[];
194 extern const char *mem_sleep_states
[];
195 extern suspend_state_t mem_sleep_current
;
197 extern int suspend_devices_and_enter(suspend_state_t state
);
198 #else /* !CONFIG_SUSPEND */
199 #define mem_sleep_current PM_SUSPEND_ON
201 static inline int suspend_devices_and_enter(suspend_state_t state
)
205 #endif /* !CONFIG_SUSPEND */
207 #ifdef CONFIG_PM_TEST_SUSPEND
208 /* kernel/power/suspend_test.c */
209 extern void suspend_test_start(void);
210 extern void suspend_test_finish(const char *label
);
211 #else /* !CONFIG_PM_TEST_SUSPEND */
212 static inline void suspend_test_start(void) {}
213 static inline void suspend_test_finish(const char *label
) {}
214 #endif /* !CONFIG_PM_TEST_SUSPEND */
216 #ifdef CONFIG_PM_SLEEP
217 /* kernel/power/main.c */
218 extern int __pm_notifier_call_chain(unsigned long val
, int nr_to_call
,
220 extern int pm_notifier_call_chain(unsigned long val
);
223 #ifdef CONFIG_HIGHMEM
224 int restore_highmem(void);
226 static inline unsigned int count_highmem_pages(void) { return 0; }
227 static inline int restore_highmem(void) { return 0; }
231 * Suspend test levels
245 #define TEST_FIRST TEST_NONE
246 #define TEST_MAX (__TEST_AFTER_LAST - 1)
248 extern int pm_test_level
;
250 #ifdef CONFIG_SUSPEND_FREEZER
251 static inline int suspend_freeze_processes(void)
255 error
= freeze_processes();
257 * freeze_processes() automatically thaws every task if freezing
258 * fails. So we need not do anything extra upon error.
263 error
= freeze_kernel_threads();
265 * freeze_kernel_threads() thaws only kernel threads upon freezing
266 * failure. So we have to thaw the userspace tasks ourselves.
274 static inline void suspend_thaw_processes(void)
279 static inline int suspend_freeze_processes(void)
284 static inline void suspend_thaw_processes(void)
289 #ifdef CONFIG_PM_AUTOSLEEP
291 /* kernel/power/autosleep.c */
292 extern int pm_autosleep_init(void);
293 extern int pm_autosleep_lock(void);
294 extern void pm_autosleep_unlock(void);
295 extern suspend_state_t
pm_autosleep_state(void);
296 extern int pm_autosleep_set_state(suspend_state_t state
);
298 #else /* !CONFIG_PM_AUTOSLEEP */
300 static inline int pm_autosleep_init(void) { return 0; }
301 static inline int pm_autosleep_lock(void) { return 0; }
302 static inline void pm_autosleep_unlock(void) {}
303 static inline suspend_state_t
pm_autosleep_state(void) { return PM_SUSPEND_ON
; }
305 #endif /* !CONFIG_PM_AUTOSLEEP */
307 #ifdef CONFIG_PM_WAKELOCKS
309 /* kernel/power/wakelock.c */
310 extern ssize_t
pm_show_wakelocks(char *buf
, bool show_active
);
311 extern int pm_wake_lock(const char *buf
);
312 extern int pm_wake_unlock(const char *buf
);
314 #endif /* !CONFIG_PM_WAKELOCKS */