?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
Merge tag 'regmap-fix-v4.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git...
[linux/fpc-iii.git] / drivers / media / usb / em28xx / em28xx-cards.c
blobe397f544f108c6e6a69493e7d3f9e6380308a03f
1 /*
2 em28xx-cards.c - driver for Empia EM2800/EM2820/2840 USB
3 video capture devices
4
5 Copyright (C) 2005 Ludovico Cavedon <cavedon@sssup.it>
6 Markus Rechberger <mrechberger@gmail.com>
7 Mauro Carvalho Chehab <mchehab@infradead.org>
8 Sascha Sommer <saschasommer@freenet.de>
9 Copyright (C) 2012 Frank Schäfer <fschaefer.oss@googlemail.com>
10
11 This program is free software; you can redistribute it and/or modify
12 it under the terms of the GNU General Public License as published by
13 the Free Software Foundation; either version 2 of the License, or
14 (at your option) any later version.
15
16 This program is distributed in the hope that it will be useful,
17 but WITHOUT ANY WARRANTY; without even the implied warranty of
18 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
19 GNU General Public License for more details.
20
21 You should have received a copy of the GNU General Public License
22 along with this program; if not, write to the Free Software
23 Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
24 */
25
26 #include <linux/init.h>
27 #include <linux/module.h>
28 #include <linux/slab.h>
29 #include <linux/delay.h>
30 #include <linux/i2c.h>
31 #include <linux/usb.h>
32 #include <media/tuner.h>
33 #include <media/drv-intf/msp3400.h>
34 #include <media/i2c/saa7115.h>
35 #include <dt-bindings/media/tvp5150.h>
36 #include <media/i2c/tvaudio.h>
37 #include <media/i2c-addr.h>
38 #include <media/tveeprom.h>
39 #include <media/v4l2-common.h>
40 #include <sound/ac97_codec.h>
41
42 #include "em28xx.h"
43
44 #define DRIVER_NAME "em28xx"
45
46 static int tuner = -1;
47 module_param(tuner, int, 0444);
48 MODULE_PARM_DESC(tuner, "tuner type");
49
50 static unsigned int disable_ir;
51 module_param(disable_ir, int, 0444);
52 MODULE_PARM_DESC(disable_ir, "disable infrared remote support");
53
54 static unsigned int disable_usb_speed_check;
55 module_param(disable_usb_speed_check, int, 0444);
56 MODULE_PARM_DESC(disable_usb_speed_check,
57 "override min bandwidth requirement of 480M bps");
58
59 static unsigned int card[] = {[0 ... (EM28XX_MAXBOARDS - 1)] = -1U };
60 module_param_array(card, int, NULL, 0444);
61 MODULE_PARM_DESC(card, "card type");
62
63 static int usb_xfer_mode = -1;
64 module_param(usb_xfer_mode, int, 0444);
65 MODULE_PARM_DESC(usb_xfer_mode,
66 "USB transfer mode for frame data (-1 = auto, 0 = prefer isoc, 1 = prefer bulk)");
67
68 /* Bitmask marking allocated devices from 0 to EM28XX_MAXBOARDS - 1 */
69 static DECLARE_BITMAP(em28xx_devused, EM28XX_MAXBOARDS);
70
71 struct em28xx_hash_table {
72 unsigned long hash;
73 unsigned int model;
74 unsigned int tuner;
75 };
76
77 static void em28xx_pre_card_setup(struct em28xx *dev);
78
79 /*
80 * Reset sequences for analog/digital modes
81 */
82
83 /* Reset for the most [analog] boards */
84 static struct em28xx_reg_seq default_analog[] = {
85 {EM2820_R08_GPIO_CTRL, 0x6d, ~EM_GPIO_4, 10},
86 { -1, -1, -1, -1},
87 };
88
89 /* Reset for the most [digital] boards */
90 static struct em28xx_reg_seq default_digital[] = {
91 {EM2820_R08_GPIO_CTRL, 0x6e, ~EM_GPIO_4, 10},
92 { -1, -1, -1, -1},
93 };
94
95 /* Board Hauppauge WinTV HVR 900 analog */
96 static struct em28xx_reg_seq hauppauge_wintv_hvr_900_analog[] = {
97 {EM2820_R08_GPIO_CTRL, 0x2d, ~EM_GPIO_4, 10},
98 { 0x05, 0xff, 0x10, 10},
99 { -1, -1, -1, -1},
100 };
101
102 /* Board Hauppauge WinTV HVR 900 digital */
103 static struct em28xx_reg_seq hauppauge_wintv_hvr_900_digital[] = {
104 {EM2820_R08_GPIO_CTRL, 0x2e, ~EM_GPIO_4, 10},
105 {EM2880_R04_GPO, 0x04, 0x0f, 10},
106 {EM2880_R04_GPO, 0x0c, 0x0f, 10},
107 { -1, -1, -1, -1},
108 };
109
110 /* Board Hauppauge WinTV HVR 900 (R2) digital */
111 static struct em28xx_reg_seq hauppauge_wintv_hvr_900R2_digital[] = {
112 {EM2820_R08_GPIO_CTRL, 0x2e, ~EM_GPIO_4, 10},
113 {EM2880_R04_GPO, 0x0c, 0x0f, 10},
114 { -1, -1, -1, -1},
115 };
116
117 /* Boards - EM2880 MSI DIGIVOX AD and EM2880_BOARD_MSI_DIGIVOX_AD_II */
118 static struct em28xx_reg_seq em2880_msi_digivox_ad_analog[] = {
119 {EM2820_R08_GPIO_CTRL, 0x69, ~EM_GPIO_4, 10},
120 { -1, -1, -1, -1},
121 };
122
123 /* Boards - EM2880 MSI DIGIVOX AD and EM2880_BOARD_MSI_DIGIVOX_AD_II */
124
125 /* Board - EM2870 Kworld 355u
126 Analog - No input analog */
127
128 /* Board - EM2882 Kworld 315U digital */
129 static struct em28xx_reg_seq em2882_kworld_315u_digital[] = {
130 {EM2820_R08_GPIO_CTRL, 0xff, 0xff, 10},
131 {EM2820_R08_GPIO_CTRL, 0xfe, 0xff, 10},
132 {EM2880_R04_GPO, 0x04, 0xff, 10},
133 {EM2880_R04_GPO, 0x0c, 0xff, 10},
134 {EM2820_R08_GPIO_CTRL, 0x7e, 0xff, 10},
135 { -1, -1, -1, -1},
136 };
137
138 static struct em28xx_reg_seq em2882_kworld_315u_tuner_gpio[] = {
139 {EM2880_R04_GPO, 0x08, 0xff, 10},
140 {EM2880_R04_GPO, 0x0c, 0xff, 10},
141 {EM2880_R04_GPO, 0x08, 0xff, 10},
142 {EM2880_R04_GPO, 0x0c, 0xff, 10},
143 { -1, -1, -1, -1},
144 };
145
146 static struct em28xx_reg_seq kworld_330u_analog[] = {
147 {EM2820_R08_GPIO_CTRL, 0x6d, ~EM_GPIO_4, 10},
148 {EM2880_R04_GPO, 0x00, 0xff, 10},
149 { -1, -1, -1, -1},
150 };
151
152 static struct em28xx_reg_seq kworld_330u_digital[] = {
153 {EM2820_R08_GPIO_CTRL, 0x6e, ~EM_GPIO_4, 10},
154 {EM2880_R04_GPO, 0x08, 0xff, 10},
155 { -1, -1, -1, -1},
156 };
157
158 /* Evga inDtube
159 GPIO0 - Enable digital power (s5h1409) - low to enable
160 GPIO1 - Enable analog power (tvp5150/emp202) - low to enable
161 GPIO4 - xc3028 reset
162 GOP3 - s5h1409 reset
163 */
164 static struct em28xx_reg_seq evga_indtube_analog[] = {
165 {EM2820_R08_GPIO_CTRL, 0x79, 0xff, 60},
166 { -1, -1, -1, -1},
167 };
168
169 static struct em28xx_reg_seq evga_indtube_digital[] = {
170 {EM2820_R08_GPIO_CTRL, 0x7a, 0xff, 1},
171 {EM2880_R04_GPO, 0x04, 0xff, 10},
172 {EM2880_R04_GPO, 0x0c, 0xff, 1},
173 { -1, -1, -1, -1},
174 };
175
176 /*
177 * KWorld PlusTV 340U, UB435-Q and UB435-Q V2 (ATSC) GPIOs map:
178 * EM_GPIO_0 - currently unknown
179 * EM_GPIO_1 - LED disable/enable (1 = off, 0 = on)
180 * EM_GPIO_2 - currently unknown
181 * EM_GPIO_3 - currently unknown
182 * EM_GPIO_4 - TDA18271HD/C1 tuner (1 = active, 0 = in reset)
183 * EM_GPIO_5 - LGDT3304 ATSC/QAM demod (1 = active, 0 = in reset)
184 * EM_GPIO_6 - currently unknown
185 * EM_GPIO_7 - currently unknown
186 */
187 static struct em28xx_reg_seq kworld_a340_digital[] = {
188 {EM2820_R08_GPIO_CTRL, 0x6d, ~EM_GPIO_4, 10},
189 { -1, -1, -1, -1},
190 };
191
192 static struct em28xx_reg_seq kworld_ub435q_v3_digital[] = {
193 {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 100},
194 {EM2874_R80_GPIO_P0_CTRL, 0xfe, 0xff, 100},
195 {EM2874_R80_GPIO_P0_CTRL, 0xbe, 0xff, 100},
196 {EM2874_R80_GPIO_P0_CTRL, 0xfe, 0xff, 100},
197 { -1, -1, -1, -1},
198 };
199
200 /* Pinnacle Hybrid Pro eb1a:2881 */
201 static struct em28xx_reg_seq pinnacle_hybrid_pro_analog[] = {
202 {EM2820_R08_GPIO_CTRL, 0xfd, ~EM_GPIO_4, 10},
203 { -1, -1, -1, -1},
204 };
205
206 static struct em28xx_reg_seq pinnacle_hybrid_pro_digital[] = {
207 {EM2820_R08_GPIO_CTRL, 0x6e, ~EM_GPIO_4, 10},
208 {EM2880_R04_GPO, 0x04, 0xff, 100},/* zl10353 reset */
209 {EM2880_R04_GPO, 0x0c, 0xff, 1},
210 { -1, -1, -1, -1},
211 };
212
213 static struct em28xx_reg_seq terratec_cinergy_USB_XS_FR_analog[] = {
214 {EM2820_R08_GPIO_CTRL, 0x6d, ~EM_GPIO_4, 10},
215 {EM2880_R04_GPO, 0x00, 0xff, 10},
216 { -1, -1, -1, -1},
217 };
218
219 static struct em28xx_reg_seq terratec_cinergy_USB_XS_FR_digital[] = {
220 {EM2820_R08_GPIO_CTRL, 0x6e, ~EM_GPIO_4, 10},
221 {EM2880_R04_GPO, 0x08, 0xff, 10},
222 { -1, -1, -1, -1},
223 };
224
225 /* PCTV HD Mini (80e) GPIOs
226 0-5: not used
227 6: demod reset, active low
228 7: LED on, active high */
229 static struct em28xx_reg_seq em2874_pctv_80e_digital[] = {
230 {EM28XX_R06_I2C_CLK, 0x45, 0xff, 10}, /*400 KHz*/
231 {EM2874_R80_GPIO_P0_CTRL, 0x00, 0xff, 100},/*Demod reset*/
232 {EM2874_R80_GPIO_P0_CTRL, 0x40, 0xff, 10},
233 { -1, -1, -1, -1},
234 };
235
236 /* eb1a:2868 Reddo DVB-C USB TV Box
237 GPIO4 - CU1216L NIM
238 Other GPIOs seems to be don't care. */
239 static struct em28xx_reg_seq reddo_dvb_c_usb_box[] = {
240 {EM2820_R08_GPIO_CTRL, 0xfe, 0xff, 10},
241 {EM2820_R08_GPIO_CTRL, 0xde, 0xff, 10},
242 {EM2820_R08_GPIO_CTRL, 0xfe, 0xff, 10},
243 {EM2820_R08_GPIO_CTRL, 0xff, 0xff, 10},
244 {EM2820_R08_GPIO_CTRL, 0x7f, 0xff, 10},
245 {EM2820_R08_GPIO_CTRL, 0x6f, 0xff, 10},
246 {EM2820_R08_GPIO_CTRL, 0xff, 0xff, 10},
247 { -1, -1, -1, -1},
248 };
249
250 /* Callback for the most boards */
251 static struct em28xx_reg_seq default_tuner_gpio[] = {
252 {EM2820_R08_GPIO_CTRL, EM_GPIO_4, EM_GPIO_4, 10},
253 {EM2820_R08_GPIO_CTRL, 0, EM_GPIO_4, 10},
254 {EM2820_R08_GPIO_CTRL, EM_GPIO_4, EM_GPIO_4, 10},
255 { -1, -1, -1, -1},
256 };
257
258 /* Mute/unmute */
259 static struct em28xx_reg_seq compro_unmute_tv_gpio[] = {
260 {EM2820_R08_GPIO_CTRL, 5, 7, 10},
261 { -1, -1, -1, -1},
262 };
263
264 static struct em28xx_reg_seq compro_unmute_svid_gpio[] = {
265 {EM2820_R08_GPIO_CTRL, 4, 7, 10},
266 { -1, -1, -1, -1},
267 };
268
269 static struct em28xx_reg_seq compro_mute_gpio[] = {
270 {EM2820_R08_GPIO_CTRL, 6, 7, 10},
271 { -1, -1, -1, -1},
272 };
273
274 /* Terratec AV350 */
275 static struct em28xx_reg_seq terratec_av350_mute_gpio[] = {
276 {EM2820_R08_GPIO_CTRL, 0xff, 0x7f, 10},
277 { -1, -1, -1, -1},
278 };
279
280 static struct em28xx_reg_seq terratec_av350_unmute_gpio[] = {
281 {EM2820_R08_GPIO_CTRL, 0xff, 0xff, 10},
282 { -1, -1, -1, -1},
283 };
284
285 static struct em28xx_reg_seq silvercrest_reg_seq[] = {
286 {EM2820_R08_GPIO_CTRL, 0xff, 0xff, 10},
287 {EM2820_R08_GPIO_CTRL, 0x01, 0xf7, 10},
288 { -1, -1, -1, -1},
289 };
290
291 static struct em28xx_reg_seq vc211a_enable[] = {
292 {EM2820_R08_GPIO_CTRL, 0xff, 0x07, 10},
293 {EM2820_R08_GPIO_CTRL, 0xff, 0x0f, 10},
294 {EM2820_R08_GPIO_CTRL, 0xff, 0x0b, 10},
295 { -1, -1, -1, -1},
296 };
297
298 static struct em28xx_reg_seq dikom_dk300_digital[] = {
299 {EM2820_R08_GPIO_CTRL, 0x6e, ~EM_GPIO_4, 10},
300 {EM2880_R04_GPO, 0x08, 0xff, 10},
301 { -1, -1, -1, -1},
302 };
303
304 /* Reset for the most [digital] boards */
305 static struct em28xx_reg_seq leadership_digital[] = {
306 {EM2874_R80_GPIO_P0_CTRL, 0x70, 0xff, 10},
307 { -1, -1, -1, -1},
308 };
309
310 static struct em28xx_reg_seq leadership_reset[] = {
311 {EM2874_R80_GPIO_P0_CTRL, 0xf0, 0xff, 10},
312 {EM2874_R80_GPIO_P0_CTRL, 0xb0, 0xff, 10},
313 {EM2874_R80_GPIO_P0_CTRL, 0xf0, 0xff, 10},
314 { -1, -1, -1, -1},
315 };
316
317 /* 2013:024f PCTV nanoStick T2 290e
318 * GPIO_6 - demod reset
319 * GPIO_7 - LED
320 */
321 static struct em28xx_reg_seq pctv_290e[] = {
322 {EM2874_R80_GPIO_P0_CTRL, 0x00, 0xff, 80},
323 {EM2874_R80_GPIO_P0_CTRL, 0x40, 0xff, 80}, /* GPIO_6 = 1 */
324 {EM2874_R80_GPIO_P0_CTRL, 0xc0, 0xff, 80}, /* GPIO_7 = 1 */
325 { -1, -1, -1, -1},
326 };
327
328 #if 0
329 static struct em28xx_reg_seq terratec_h5_gpio[] = {
330 {EM2820_R08_GPIO_CTRL, 0xff, 0xff, 10},
331 {EM2874_R80_GPIO_P0_CTRL, 0xf6, 0xff, 100},
332 {EM2874_R80_GPIO_P0_CTRL, 0xf2, 0xff, 50},
333 {EM2874_R80_GPIO_P0_CTRL, 0xf6, 0xff, 50},
334 { -1, -1, -1, -1},
335 };
336
337 static struct em28xx_reg_seq terratec_h5_digital[] = {
338 {EM2874_R80_GPIO_P0_CTRL, 0xf6, 0xff, 10},
339 {EM2874_R80_GPIO_P0_CTRL, 0xe6, 0xff, 100},
340 {EM2874_R80_GPIO_P0_CTRL, 0xa6, 0xff, 10},
341 { -1, -1, -1, -1},
342 };
343 #endif
344
345 /* 2013:024f PCTV DVB-S2 Stick 460e
346 * GPIO_0 - POWER_ON
347 * GPIO_1 - BOOST
348 * GPIO_2 - VUV_LNB (red LED)
349 * GPIO_3 - EXT_12V
350 * GPIO_4 - INT_DEM (DEMOD GPIO_0)
351 * GPIO_5 - INT_LNB
352 * GPIO_6 - RESET_DEM
353 * GPIO_7 - LED (green LED)
354 */
355 static struct em28xx_reg_seq pctv_460e[] = {
356 {EM2874_R80_GPIO_P0_CTRL, 0x01, 0xff, 50},
357 { 0x0d, 0xff, 0xff, 50},
358 {EM2874_R80_GPIO_P0_CTRL, 0x41, 0xff, 50}, /* GPIO_6=1 */
359 { 0x0d, 0x42, 0xff, 50},
360 {EM2874_R80_GPIO_P0_CTRL, 0x61, 0xff, 50}, /* GPIO_5=1 */
361 { -1, -1, -1, -1},
362 };
363
364 static struct em28xx_reg_seq c3tech_digital_duo_digital[] = {
365 {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 10},
366 {EM2874_R80_GPIO_P0_CTRL, 0xfd, 0xff, 10}, /* xc5000 reset */
367 {EM2874_R80_GPIO_P0_CTRL, 0xf9, 0xff, 35},
368 {EM2874_R80_GPIO_P0_CTRL, 0xfd, 0xff, 10},
369 {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 10},
370 {EM2874_R80_GPIO_P0_CTRL, 0xfe, 0xff, 10},
371 {EM2874_R80_GPIO_P0_CTRL, 0xbe, 0xff, 10},
372 {EM2874_R80_GPIO_P0_CTRL, 0xfe, 0xff, 20},
373 { -1, -1, -1, -1},
374 };
375
376 /*
377 * 2013:0258 PCTV DVB-S2 Stick (461e)
378 * GPIO 0 = POWER_ON
379 * GPIO 1 = BOOST
380 * GPIO 2 = VUV_LNB (red LED)
381 * GPIO 3 = #EXT_12V
382 * GPIO 4 = INT_DEM
383 * GPIO 5 = INT_LNB
384 * GPIO 6 = #RESET_DEM
385 * GPIO 7 = P07_LED (green LED)
386 */
387 static struct em28xx_reg_seq pctv_461e[] = {
388 {EM2874_R80_GPIO_P0_CTRL, 0x7f, 0xff, 0},
389 {0x0d, 0xff, 0xff, 0},
390 {EM2874_R80_GPIO_P0_CTRL, 0x3f, 0xff, 100}, /* reset demod */
391 {EM2874_R80_GPIO_P0_CTRL, 0x7f, 0xff, 200}, /* reset demod */
392 {0x0d, 0x42, 0xff, 0},
393 {EM2874_R80_GPIO_P0_CTRL, 0xeb, 0xff, 0},
394 {EM2874_R5F_TS_ENABLE, 0x84, 0x84, 0}, /* parallel? | null discard */
395 { -1, -1, -1, -1},
396 };
397
398 #if 0
399 static struct em28xx_reg_seq hauppauge_930c_gpio[] = {
400 {EM2874_R80_GPIO_P0_CTRL, 0x6f, 0xff, 10},
401 {EM2874_R80_GPIO_P0_CTRL, 0x4f, 0xff, 10}, /* xc5000 reset */
402 {EM2874_R80_GPIO_P0_CTRL, 0x6f, 0xff, 10},
403 {EM2874_R80_GPIO_P0_CTRL, 0x4f, 0xff, 10},
404 { -1, -1, -1, -1},
405 };
406
407 static struct em28xx_reg_seq hauppauge_930c_digital[] = {
408 {EM2874_R80_GPIO_P0_CTRL, 0xf6, 0xff, 10},
409 {EM2874_R80_GPIO_P0_CTRL, 0xe6, 0xff, 100},
410 {EM2874_R80_GPIO_P0_CTRL, 0xa6, 0xff, 10},
411 { -1, -1, -1, -1},
412 };
413 #endif
414
415 /* 1b80:e425 MaxMedia UB425-TC
416 * 1b80:e1cc Delock 61959
417 * GPIO_6 - demod reset, 0=active
418 * GPIO_7 - LED, 0=active
419 */
420 static struct em28xx_reg_seq maxmedia_ub425_tc[] = {
421 {EM2874_R80_GPIO_P0_CTRL, 0x83, 0xff, 100},
422 {EM2874_R80_GPIO_P0_CTRL, 0xc3, 0xff, 100}, /* GPIO_6 = 1 */
423 {EM2874_R80_GPIO_P0_CTRL, 0x43, 0xff, 000}, /* GPIO_7 = 0 */
424 { -1, -1, -1, -1},
425 };
426
427 /* 2304:0242 PCTV QuatroStick (510e)
428 * GPIO_2: decoder reset, 0=active
429 * GPIO_4: decoder suspend, 0=active
430 * GPIO_6: demod reset, 0=active
431 * GPIO_7: LED, 1=active
432 */
433 static struct em28xx_reg_seq pctv_510e[] = {
434 {EM2874_R80_GPIO_P0_CTRL, 0x10, 0xff, 100},
435 {EM2874_R80_GPIO_P0_CTRL, 0x14, 0xff, 100}, /* GPIO_2 = 1 */
436 {EM2874_R80_GPIO_P0_CTRL, 0x54, 0xff, 050}, /* GPIO_6 = 1 */
437 { -1, -1, -1, -1},
438 };
439
440 /* 2013:0251 PCTV QuatroStick nano (520e)
441 * GPIO_2: decoder reset, 0=active
442 * GPIO_4: decoder suspend, 0=active
443 * GPIO_6: demod reset, 0=active
444 * GPIO_7: LED, 1=active
445 */
446 static struct em28xx_reg_seq pctv_520e[] = {
447 {EM2874_R80_GPIO_P0_CTRL, 0x10, 0xff, 100},
448 {EM2874_R80_GPIO_P0_CTRL, 0x14, 0xff, 100}, /* GPIO_2 = 1 */
449 {EM2874_R80_GPIO_P0_CTRL, 0x54, 0xff, 050}, /* GPIO_6 = 1 */
450 {EM2874_R80_GPIO_P0_CTRL, 0xd4, 0xff, 000}, /* GPIO_7 = 1 */
451 { -1, -1, -1, -1},
452 };
453
454 /* 1ae7:9003/9004 SpeedLink Vicious And Devine Laplace webcam
455 * reg 0x80/0x84:
456 * GPIO_0: capturing LED, 0=on, 1=off
457 * GPIO_2: AV mute button, 0=pressed, 1=unpressed
458 * GPIO 3: illumination button, 0=pressed, 1=unpressed
459 * GPIO_6: illumination/flash LED, 0=on, 1=off
460 * reg 0x81/0x85:
461 * GPIO_7: snapshot button, 0=pressed, 1=unpressed
462 */
463 static struct em28xx_reg_seq speedlink_vad_laplace_reg_seq[] = {
464 {EM2820_R08_GPIO_CTRL, 0xf7, 0xff, 10},
465 {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xb2, 10},
466 { -1, -1, -1, -1},
467 };
468
469 static struct em28xx_reg_seq pctv_292e[] = {
470 {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 0},
471 {0x0d, 0xff, 0xff, 950},
472 {EM2874_R80_GPIO_P0_CTRL, 0xbd, 0xff, 100},
473 {EM2874_R80_GPIO_P0_CTRL, 0xfd, 0xff, 410},
474 {EM2874_R80_GPIO_P0_CTRL, 0x7d, 0xff, 300},
475 {EM2874_R80_GPIO_P0_CTRL, 0x7c, 0xff, 60},
476 {0x0d, 0x42, 0xff, 50},
477 {EM2874_R5F_TS_ENABLE, 0x85, 0xff, 0},
478 {-1, -1, -1, -1},
479 };
480
481 static struct em28xx_reg_seq terratec_t2_stick_hd[] = {
482 {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 0},
483 {0x0d, 0xff, 0xff, 600},
484 {EM2874_R80_GPIO_P0_CTRL, 0xfc, 0xff, 10},
485 {EM2874_R80_GPIO_P0_CTRL, 0xbc, 0xff, 100},
486 {EM2874_R80_GPIO_P0_CTRL, 0xfc, 0xff, 100},
487 {EM2874_R80_GPIO_P0_CTRL, 0x00, 0xff, 300},
488 {EM2874_R80_GPIO_P0_CTRL, 0xf8, 0xff, 100},
489 {EM2874_R80_GPIO_P0_CTRL, 0xfc, 0xff, 300},
490 {0x0d, 0x42, 0xff, 1000},
491 {EM2874_R5F_TS_ENABLE, 0x85, 0xff, 0},
492 {-1, -1, -1, -1},
493 };
494
495 static struct em28xx_reg_seq plex_px_bcud[] = {
496 {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 0},
497 {0x0d, 0xff, 0xff, 0},
498 {EM2874_R50_IR_CONFIG, 0x01, 0xff, 0},
499 {EM28XX_R06_I2C_CLK, 0x40, 0xff, 0},
500 {EM2874_R80_GPIO_P0_CTRL, 0xfd, 0xff, 100},
501 {EM28XX_R12_VINENABLE, 0x20, 0x20, 0},
502 {0x0d, 0x42, 0xff, 1000},
503 {EM2874_R80_GPIO_P0_CTRL, 0xfc, 0xff, 10},
504 {EM2874_R80_GPIO_P0_CTRL, 0xfd, 0xff, 10},
505 {0x73, 0xfd, 0xff, 100},
506 {-1, -1, -1, -1},
507 };
508
509 /*
510 * 2040:0265 Hauppauge WinTV-dualHD DVB
511 * reg 0x80/0x84:
512 * GPIO_0: Yellow LED tuner 1, 0=on, 1=off
513 * GPIO_1: Green LED tuner 1, 0=on, 1=off
514 * GPIO_2: Yellow LED tuner 2, 0=on, 1=off
515 * GPIO_3: Green LED tuner 2, 0=on, 1=off
516 * GPIO_5: Reset #2, 0=active
517 * GPIO_6: Reset #1, 0=active
518 */
519 static struct em28xx_reg_seq hauppauge_dualhd_dvb[] = {
520 {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 0},
521 {0x0d, 0xff, 0xff, 200},
522 {0x50, 0x04, 0xff, 300},
523 {EM2874_R80_GPIO_P0_CTRL, 0xbf, 0xff, 100}, /* demod 1 reset */
524 {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 100},
525 {EM2874_R80_GPIO_P0_CTRL, 0xdf, 0xff, 100}, /* demod 2 reset */
526 {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 100},
527 {EM2874_R5F_TS_ENABLE, 0x44, 0xff, 50},
528 {EM2874_R5D_TS1_PKT_SIZE, 0x05, 0xff, 50},
529 {EM2874_R5E_TS2_PKT_SIZE, 0x05, 0xff, 50},
530 {-1, -1, -1, -1},
531 };
532
533 /*
534 * Button definitions
535 */
536 static struct em28xx_button std_snapshot_button[] = {
537 {
538 .role = EM28XX_BUTTON_SNAPSHOT,
539 .reg_r = EM28XX_R0C_USBSUSP,
540 .reg_clearing = EM28XX_R0C_USBSUSP,
541 .mask = EM28XX_R0C_USBSUSP_SNAPSHOT,
542 .inverted = 0,
543 },
544 {-1, 0, 0, 0, 0},
545 };
546
547 static struct em28xx_button speedlink_vad_laplace_buttons[] = {
548 {
549 .role = EM28XX_BUTTON_SNAPSHOT,
550 .reg_r = EM2874_R85_GPIO_P1_STATE,
551 .mask = 0x80,
552 .inverted = 1,
553 },
554 {
555 .role = EM28XX_BUTTON_ILLUMINATION,
556 .reg_r = EM2874_R84_GPIO_P0_STATE,
557 .mask = 0x08,
558 .inverted = 1,
559 },
560 {-1, 0, 0, 0, 0},
561 };
562
563 /*
564 * LED definitions
565 */
566 static struct em28xx_led speedlink_vad_laplace_leds[] = {
567 {
568 .role = EM28XX_LED_ANALOG_CAPTURING,
569 .gpio_reg = EM2874_R80_GPIO_P0_CTRL,
570 .gpio_mask = 0x01,
571 .inverted = 1,
572 },
573 {
574 .role = EM28XX_LED_ILLUMINATION,
575 .gpio_reg = EM2874_R80_GPIO_P0_CTRL,
576 .gpio_mask = 0x40,
577 .inverted = 1,
578 },
579 {-1, 0, 0, 0},
580 };
581
582 static struct em28xx_led kworld_ub435q_v3_leds[] = {
583 {
584 .role = EM28XX_LED_DIGITAL_CAPTURING,
585 .gpio_reg = EM2874_R80_GPIO_P0_CTRL,
586 .gpio_mask = 0x80,
587 .inverted = 1,
588 },
589 {-1, 0, 0, 0},
590 };
591
592 static struct em28xx_led pctv_80e_leds[] = {
593 {
594 .role = EM28XX_LED_DIGITAL_CAPTURING,
595 .gpio_reg = EM2874_R80_GPIO_P0_CTRL,
596 .gpio_mask = 0x80,
597 .inverted = 0,
598 },
599 {-1, 0, 0, 0},
600 };
601
602 static struct em28xx_led terratec_grabby_leds[] = {
603 {
604 .role = EM28XX_LED_ANALOG_CAPTURING,
605 .gpio_reg = EM2820_R08_GPIO_CTRL,
606 .gpio_mask = EM_GPIO_3,
607 .inverted = 1,
608 },
609 {-1, 0, 0, 0},
610 };
611
612 static struct em28xx_led hauppauge_dualhd_leds[] = {
613 {
614 .role = EM28XX_LED_DIGITAL_CAPTURING,
615 .gpio_reg = EM2874_R80_GPIO_P0_CTRL,
616 .gpio_mask = EM_GPIO_1,
617 .inverted = 1,
618 },
619 {
620 .role = EM28XX_LED_DIGITAL_CAPTURING_TS2,
621 .gpio_reg = EM2874_R80_GPIO_P0_CTRL,
622 .gpio_mask = EM_GPIO_3,
623 .inverted = 1,
624 },
625 {-1, 0, 0, 0},
626 };
627
628 /*
629 * Board definitions
630 */
631 struct em28xx_board em28xx_boards[] = {
632 [EM2750_BOARD_UNKNOWN] = {
633 .name = "EM2710/EM2750/EM2751 webcam grabber",
634 .xclk = EM28XX_XCLK_FREQUENCY_20MHZ,
635 .tuner_type = TUNER_ABSENT,
636 .is_webcam = 1,
637 .input = { {
638 .type = EM28XX_VMUX_COMPOSITE,
639 .vmux = 0,
640 .amux = EM28XX_AMUX_VIDEO,
641 .gpio = silvercrest_reg_seq,
642 } },
643 },
644 [EM2800_BOARD_UNKNOWN] = {
645 .name = "Unknown EM2800 video grabber",
646 .is_em2800 = 1,
647 .tda9887_conf = TDA9887_PRESENT,
648 .decoder = EM28XX_SAA711X,
649 .tuner_type = TUNER_ABSENT,
650 .input = { {
651 .type = EM28XX_VMUX_COMPOSITE,
652 .vmux = SAA7115_COMPOSITE0,
653 .amux = EM28XX_AMUX_LINE_IN,
654 }, {
655 .type = EM28XX_VMUX_SVIDEO,
656 .vmux = SAA7115_SVIDEO3,
657 .amux = EM28XX_AMUX_LINE_IN,
658 } },
659 },
660 [EM2820_BOARD_UNKNOWN] = {
661 .name = "Unknown EM2750/28xx video grabber",
662 .tuner_type = TUNER_ABSENT,
663 .is_webcam = 1, /* To enable sensor probe */
664 },
665 [EM2750_BOARD_DLCW_130] = {
666 /* Beijing Huaqi Information Digital Technology Co., Ltd */
667 .name = "Huaqi DLCW-130",
668 .valid = EM28XX_BOARD_NOT_VALIDATED,
669 .xclk = EM28XX_XCLK_FREQUENCY_48MHZ,
670 .tuner_type = TUNER_ABSENT,
671 .is_webcam = 1,
672 .input = { {
673 .type = EM28XX_VMUX_COMPOSITE,
674 .vmux = 0,
675 .amux = EM28XX_AMUX_VIDEO,
676 } },
677 },
678 [EM2820_BOARD_KWORLD_PVRTV2800RF] = {
679 .name = "Kworld PVR TV 2800 RF",
680 .tuner_type = TUNER_TEMIC_PAL,
681 .tda9887_conf = TDA9887_PRESENT,
682 .decoder = EM28XX_SAA711X,
683 .input = { {
684 .type = EM28XX_VMUX_COMPOSITE,
685 .vmux = SAA7115_COMPOSITE0,
686 .amux = EM28XX_AMUX_LINE_IN,
687 }, {
688 .type = EM28XX_VMUX_SVIDEO,
689 .vmux = SAA7115_SVIDEO3,
690 .amux = EM28XX_AMUX_LINE_IN,
691 } },
692 },
693 [EM2820_BOARD_GADMEI_TVR200] = {
694 .name = "Gadmei TVR200",
695 .tuner_type = TUNER_LG_PAL_NEW_TAPC,
696 .tda9887_conf = TDA9887_PRESENT,
697 .decoder = EM28XX_SAA711X,
698 .input = { {
699 .type = EM28XX_VMUX_TELEVISION,
700 .vmux = SAA7115_COMPOSITE2,
701 .amux = EM28XX_AMUX_LINE_IN,
702 }, {
703 .type = EM28XX_VMUX_COMPOSITE,
704 .vmux = SAA7115_COMPOSITE0,
705 .amux = EM28XX_AMUX_LINE_IN,
706 }, {
707 .type = EM28XX_VMUX_SVIDEO,
708 .vmux = SAA7115_SVIDEO3,
709 .amux = EM28XX_AMUX_LINE_IN,
710 } },
711 },
712 [EM2820_BOARD_TERRATEC_CINERGY_250] = {
713 .name = "Terratec Cinergy 250 USB",
714 .tuner_type = TUNER_LG_PAL_NEW_TAPC,
715 .has_ir_i2c = 1,
716 .tda9887_conf = TDA9887_PRESENT,
717 .decoder = EM28XX_SAA711X,
718 .input = { {
719 .type = EM28XX_VMUX_TELEVISION,
720 .vmux = SAA7115_COMPOSITE2,
721 .amux = EM28XX_AMUX_VIDEO,
722 }, {
723 .type = EM28XX_VMUX_COMPOSITE,
724 .vmux = SAA7115_COMPOSITE0,
725 .amux = EM28XX_AMUX_LINE_IN,
726 }, {
727 .type = EM28XX_VMUX_SVIDEO,
728 .vmux = SAA7115_SVIDEO3,
729 .amux = EM28XX_AMUX_LINE_IN,
730 } },
731 },
732 [EM2820_BOARD_PINNACLE_USB_2] = {
733 .name = "Pinnacle PCTV USB 2",
734 .tuner_type = TUNER_LG_PAL_NEW_TAPC,
735 .has_ir_i2c = 1,
736 .tda9887_conf = TDA9887_PRESENT,
737 .decoder = EM28XX_SAA711X,
738 .input = { {
739 .type = EM28XX_VMUX_TELEVISION,
740 .vmux = SAA7115_COMPOSITE2,
741 .amux = EM28XX_AMUX_VIDEO,
742 }, {
743 .type = EM28XX_VMUX_COMPOSITE,
744 .vmux = SAA7115_COMPOSITE0,
745 .amux = EM28XX_AMUX_LINE_IN,
746 }, {
747 .type = EM28XX_VMUX_SVIDEO,
748 .vmux = SAA7115_SVIDEO3,
749 .amux = EM28XX_AMUX_LINE_IN,
750 } },
751 },
752 [EM2820_BOARD_HAUPPAUGE_WINTV_USB_2] = {
753 .name = "Hauppauge WinTV USB 2",
754 .tuner_type = TUNER_PHILIPS_FM1236_MK3,
755 .tda9887_conf = TDA9887_PRESENT |
756 TDA9887_PORT1_ACTIVE |
757 TDA9887_PORT2_ACTIVE,
758 .decoder = EM28XX_TVP5150,
759 .has_msp34xx = 1,
760 .has_ir_i2c = 1,
761 .input = { {
762 .type = EM28XX_VMUX_TELEVISION,
763 .vmux = TVP5150_COMPOSITE0,
764 .amux = MSP_INPUT_DEFAULT,
765 }, {
766 .type = EM28XX_VMUX_SVIDEO,
767 .vmux = TVP5150_SVIDEO,
768 .amux = MSP_INPUT(MSP_IN_SCART1, MSP_IN_TUNER1,
769 MSP_DSP_IN_SCART, MSP_DSP_IN_SCART),
770 } },
771 },
772 [EM2820_BOARD_DLINK_USB_TV] = {
773 .name = "D-Link DUB-T210 TV Tuner",
774 .valid = EM28XX_BOARD_NOT_VALIDATED,
775 .tuner_type = TUNER_LG_PAL_NEW_TAPC,
776 .tda9887_conf = TDA9887_PRESENT,
777 .decoder = EM28XX_SAA711X,
778 .input = { {
779 .type = EM28XX_VMUX_TELEVISION,
780 .vmux = SAA7115_COMPOSITE2,
781 .amux = EM28XX_AMUX_LINE_IN,
782 }, {
783 .type = EM28XX_VMUX_COMPOSITE,
784 .vmux = SAA7115_COMPOSITE0,
785 .amux = EM28XX_AMUX_LINE_IN,
786 }, {
787 .type = EM28XX_VMUX_SVIDEO,
788 .vmux = SAA7115_SVIDEO3,
789 .amux = EM28XX_AMUX_LINE_IN,
790 } },
791 },
792 [EM2820_BOARD_HERCULES_SMART_TV_USB2] = {
793 .name = "Hercules Smart TV USB 2.0",
794 .valid = EM28XX_BOARD_NOT_VALIDATED,
795 .tuner_type = TUNER_LG_PAL_NEW_TAPC,
796 .tda9887_conf = TDA9887_PRESENT,
797 .decoder = EM28XX_SAA711X,
798 .input = { {
799 .type = EM28XX_VMUX_TELEVISION,
800 .vmux = SAA7115_COMPOSITE2,
801 .amux = EM28XX_AMUX_LINE_IN,
802 }, {
803 .type = EM28XX_VMUX_COMPOSITE,
804 .vmux = SAA7115_COMPOSITE0,
805 .amux = EM28XX_AMUX_LINE_IN,
806 }, {
807 .type = EM28XX_VMUX_SVIDEO,
808 .vmux = SAA7115_SVIDEO3,
809 .amux = EM28XX_AMUX_LINE_IN,
810 } },
811 },
812 [EM2820_BOARD_PINNACLE_USB_2_FM1216ME] = {
813 .name = "Pinnacle PCTV USB 2 (Philips FM1216ME)",
814 .valid = EM28XX_BOARD_NOT_VALIDATED,
815 .tuner_type = TUNER_PHILIPS_FM1216ME_MK3,
816 .tda9887_conf = TDA9887_PRESENT,
817 .decoder = EM28XX_SAA711X,
818 .input = { {
819 .type = EM28XX_VMUX_TELEVISION,
820 .vmux = SAA7115_COMPOSITE2,
821 .amux = EM28XX_AMUX_VIDEO,
822 }, {
823 .type = EM28XX_VMUX_COMPOSITE,
824 .vmux = SAA7115_COMPOSITE0,
825 .amux = EM28XX_AMUX_LINE_IN,
826 }, {
827 .type = EM28XX_VMUX_SVIDEO,
828 .vmux = SAA7115_SVIDEO3,
829 .amux = EM28XX_AMUX_LINE_IN,
830 } },
831 },
832 [EM2820_BOARD_GADMEI_UTV310] = {
833 .name = "Gadmei UTV310",
834 .valid = EM28XX_BOARD_NOT_VALIDATED,
835 .tuner_type = TUNER_TNF_5335MF,
836 .tda9887_conf = TDA9887_PRESENT,
837 .decoder = EM28XX_SAA711X,
838 .input = { {
839 .type = EM28XX_VMUX_TELEVISION,
840 .vmux = SAA7115_COMPOSITE1,
841 .amux = EM28XX_AMUX_LINE_IN,
842 }, {
843 .type = EM28XX_VMUX_COMPOSITE,
844 .vmux = SAA7115_COMPOSITE0,
845 .amux = EM28XX_AMUX_LINE_IN,
846 }, {
847 .type = EM28XX_VMUX_SVIDEO,
848 .vmux = SAA7115_SVIDEO3,
849 .amux = EM28XX_AMUX_LINE_IN,
850 } },
851 },
852 [EM2820_BOARD_LEADTEK_WINFAST_USBII_DELUXE] = {
853 .name = "Leadtek Winfast USB II Deluxe",
854 .valid = EM28XX_BOARD_NOT_VALIDATED,
855 .tuner_type = TUNER_PHILIPS_FM1216ME_MK3,
856 .has_ir_i2c = 1,
857 .tvaudio_addr = 0x58,
858 .tda9887_conf = TDA9887_PRESENT |
859 TDA9887_PORT2_ACTIVE |
860 TDA9887_QSS,
861 .decoder = EM28XX_SAA711X,
862 .adecoder = EM28XX_TVAUDIO,
863 .input = { {
864 .type = EM28XX_VMUX_TELEVISION,
865 .vmux = SAA7115_COMPOSITE4,
866 .amux = EM28XX_AMUX_AUX,
867 }, {
868 .type = EM28XX_VMUX_COMPOSITE,
869 .vmux = SAA7115_COMPOSITE5,
870 .amux = EM28XX_AMUX_LINE_IN,
871 }, {
872 .type = EM28XX_VMUX_SVIDEO,
873 .vmux = SAA7115_SVIDEO3,
874 .amux = EM28XX_AMUX_LINE_IN,
875 } },
876 .radio = {
877 .type = EM28XX_RADIO,
878 .amux = EM28XX_AMUX_AUX,
879 }
880 },
881 [EM2820_BOARD_VIDEOLOGY_20K14XUSB] = {
882 .name = "Videology 20K14XUSB USB2.0",
883 .valid = EM28XX_BOARD_NOT_VALIDATED,
884 .tuner_type = TUNER_ABSENT,
885 .is_webcam = 1,
886 .input = { {
887 .type = EM28XX_VMUX_COMPOSITE,
888 .vmux = 0,
889 .amux = EM28XX_AMUX_VIDEO,
890 } },
891 },
892 [EM2820_BOARD_SILVERCREST_WEBCAM] = {
893 .name = "Silvercrest Webcam 1.3mpix",
894 .tuner_type = TUNER_ABSENT,
895 .is_webcam = 1,
896 .input = { {
897 .type = EM28XX_VMUX_COMPOSITE,
898 .vmux = 0,
899 .amux = EM28XX_AMUX_VIDEO,
900 .gpio = silvercrest_reg_seq,
901 } },
902 },
903 [EM2821_BOARD_SUPERCOMP_USB_2] = {
904 .name = "Supercomp USB 2.0 TV",
905 .valid = EM28XX_BOARD_NOT_VALIDATED,
906 .tuner_type = TUNER_PHILIPS_FM1236_MK3,
907 .tda9887_conf = TDA9887_PRESENT |
908 TDA9887_PORT1_ACTIVE |
909 TDA9887_PORT2_ACTIVE,
910 .decoder = EM28XX_SAA711X,
911 .input = { {
912 .type = EM28XX_VMUX_TELEVISION,
913 .vmux = SAA7115_COMPOSITE2,
914 .amux = EM28XX_AMUX_LINE_IN,
915 }, {
916 .type = EM28XX_VMUX_COMPOSITE,
917 .vmux = SAA7115_COMPOSITE0,
918 .amux = EM28XX_AMUX_VIDEO,
919 }, {
920 .type = EM28XX_VMUX_SVIDEO,
921 .vmux = SAA7115_SVIDEO3,
922 .amux = EM28XX_AMUX_LINE_IN,
923 } },
924 },
925 [EM2821_BOARD_USBGEAR_VD204] = {
926 .name = "Usbgear VD204v9",
927 .valid = EM28XX_BOARD_NOT_VALIDATED,
928 .tuner_type = TUNER_ABSENT, /* Capture only device */
929 .decoder = EM28XX_SAA711X,
930 .input = { {
931 .type = EM28XX_VMUX_COMPOSITE,
932 .vmux = SAA7115_COMPOSITE0,
933 .amux = EM28XX_AMUX_LINE_IN,
934 }, {
935 .type = EM28XX_VMUX_SVIDEO,
936 .vmux = SAA7115_SVIDEO3,
937 .amux = EM28XX_AMUX_LINE_IN,
938 } },
939 },
940 [EM2860_BOARD_NETGMBH_CAM] = {
941 /* Beijing Huaqi Information Digital Technology Co., Ltd */
942 .name = "NetGMBH Cam",
943 .valid = EM28XX_BOARD_NOT_VALIDATED,
944 .tuner_type = TUNER_ABSENT,
945 .is_webcam = 1,
946 .input = { {
947 .type = EM28XX_VMUX_COMPOSITE,
948 .vmux = 0,
949 .amux = EM28XX_AMUX_VIDEO,
950 } },
951 },
952 [EM2860_BOARD_TYPHOON_DVD_MAKER] = {
953 .name = "Typhoon DVD Maker",
954 .decoder = EM28XX_SAA711X,
955 .tuner_type = TUNER_ABSENT, /* Capture only device */
956 .input = { {
957 .type = EM28XX_VMUX_COMPOSITE,
958 .vmux = SAA7115_COMPOSITE0,
959 .amux = EM28XX_AMUX_LINE_IN,
960 }, {
961 .type = EM28XX_VMUX_SVIDEO,
962 .vmux = SAA7115_SVIDEO3,
963 .amux = EM28XX_AMUX_LINE_IN,
964 } },
965 },
966 [EM2860_BOARD_GADMEI_UTV330] = {
967 .name = "Gadmei UTV330",
968 .valid = EM28XX_BOARD_NOT_VALIDATED,
969 .tuner_type = TUNER_TNF_5335MF,
970 .tda9887_conf = TDA9887_PRESENT,
971 .decoder = EM28XX_SAA711X,
972 .input = { {
973 .type = EM28XX_VMUX_TELEVISION,
974 .vmux = SAA7115_COMPOSITE2,
975 .amux = EM28XX_AMUX_VIDEO,
976 }, {
977 .type = EM28XX_VMUX_COMPOSITE,
978 .vmux = SAA7115_COMPOSITE0,
979 .amux = EM28XX_AMUX_LINE_IN,
980 }, {
981 .type = EM28XX_VMUX_SVIDEO,
982 .vmux = SAA7115_SVIDEO3,
983 .amux = EM28XX_AMUX_LINE_IN,
984 } },
985 },
986 [EM2861_BOARD_GADMEI_UTV330PLUS] = {
987 .name = "Gadmei UTV330+",
988 .tuner_type = TUNER_TNF_5335MF,
989 .tda9887_conf = TDA9887_PRESENT,
990 .ir_codes = RC_MAP_GADMEI_RM008Z,
991 .decoder = EM28XX_SAA711X,
992 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ,
993 .input = { {
994 .type = EM28XX_VMUX_TELEVISION,
995 .vmux = SAA7115_COMPOSITE2,
996 .amux = EM28XX_AMUX_VIDEO,
997 }, {
998 .type = EM28XX_VMUX_COMPOSITE,
999 .vmux = SAA7115_COMPOSITE0,
1000 .amux = EM28XX_AMUX_LINE_IN,
1001 }, {
1002 .type = EM28XX_VMUX_SVIDEO,
1003 .vmux = SAA7115_SVIDEO3,
1004 .amux = EM28XX_AMUX_LINE_IN,
1005 } },
1006 },
1007 [EM2860_BOARD_TERRATEC_HYBRID_XS] = {
1008 .name = "Terratec Cinergy A Hybrid XS",
1009 .valid = EM28XX_BOARD_NOT_VALIDATED,
1010 .tuner_type = TUNER_XC2028,
1011 .tuner_gpio = default_tuner_gpio,
1012 .decoder = EM28XX_TVP5150,
1013
1014 .input = { {
1015 .type = EM28XX_VMUX_TELEVISION,
1016 .vmux = TVP5150_COMPOSITE0,
1017 .amux = EM28XX_AMUX_VIDEO,
1018 .gpio = hauppauge_wintv_hvr_900_analog,
1019 }, {
1020 .type = EM28XX_VMUX_COMPOSITE,
1021 .vmux = TVP5150_COMPOSITE1,
1022 .amux = EM28XX_AMUX_LINE_IN,
1023 .gpio = hauppauge_wintv_hvr_900_analog,
1024 }, {
1025 .type = EM28XX_VMUX_SVIDEO,
1026 .vmux = TVP5150_SVIDEO,
1027 .amux = EM28XX_AMUX_LINE_IN,
1028 .gpio = hauppauge_wintv_hvr_900_analog,
1029 } },
1030 },
1031 [EM2861_BOARD_KWORLD_PVRTV_300U] = {
1032 .name = "KWorld PVRTV 300U",
1033 .valid = EM28XX_BOARD_NOT_VALIDATED,
1034 .tuner_type = TUNER_XC2028,
1035 .tuner_gpio = default_tuner_gpio,
1036 .decoder = EM28XX_TVP5150,
1037 .input = { {
1038 .type = EM28XX_VMUX_TELEVISION,
1039 .vmux = TVP5150_COMPOSITE0,
1040 .amux = EM28XX_AMUX_VIDEO,
1041 }, {
1042 .type = EM28XX_VMUX_COMPOSITE,
1043 .vmux = TVP5150_COMPOSITE1,
1044 .amux = EM28XX_AMUX_LINE_IN,
1045 }, {
1046 .type = EM28XX_VMUX_SVIDEO,
1047 .vmux = TVP5150_SVIDEO,
1048 .amux = EM28XX_AMUX_LINE_IN,
1049 } },
1050 },
1051 [EM2861_BOARD_YAKUMO_MOVIE_MIXER] = {
1052 .name = "Yakumo MovieMixer",
1053 .tuner_type = TUNER_ABSENT, /* Capture only device */
1054 .decoder = EM28XX_TVP5150,
1055 .input = { {
1056 .type = EM28XX_VMUX_TELEVISION,
1057 .vmux = TVP5150_COMPOSITE0,
1058 .amux = EM28XX_AMUX_VIDEO,
1059 }, {
1060 .type = EM28XX_VMUX_COMPOSITE,
1061 .vmux = TVP5150_COMPOSITE1,
1062 .amux = EM28XX_AMUX_LINE_IN,
1063 }, {
1064 .type = EM28XX_VMUX_SVIDEO,
1065 .vmux = TVP5150_SVIDEO,
1066 .amux = EM28XX_AMUX_LINE_IN,
1067 } },
1068 },
1069 [EM2860_BOARD_TVP5150_REFERENCE_DESIGN] = {
1070 .name = "EM2860/TVP5150 Reference Design",
1071 .tuner_type = TUNER_ABSENT, /* Capture only device */
1072 .decoder = EM28XX_TVP5150,
1073 .input = { {
1074 .type = EM28XX_VMUX_COMPOSITE,
1075 .vmux = TVP5150_COMPOSITE1,
1076 .amux = EM28XX_AMUX_LINE_IN,
1077 }, {
1078 .type = EM28XX_VMUX_SVIDEO,
1079 .vmux = TVP5150_SVIDEO,
1080 .amux = EM28XX_AMUX_LINE_IN,
1081 } },
1082 },
1083 [EM2861_BOARD_PLEXTOR_PX_TV100U] = {
1084 .name = "Plextor ConvertX PX-TV100U",
1085 .tuner_type = TUNER_TNF_5335MF,
1086 .xclk = EM28XX_XCLK_I2S_MSB_TIMING |
1087 EM28XX_XCLK_FREQUENCY_12MHZ,
1088 .tda9887_conf = TDA9887_PRESENT,
1089 .decoder = EM28XX_TVP5150,
1090 .has_msp34xx = 1,
1091 .input = { {
1092 .type = EM28XX_VMUX_TELEVISION,
1093 .vmux = TVP5150_COMPOSITE0,
1094 .amux = EM28XX_AMUX_LINE_IN,
1095 .gpio = pinnacle_hybrid_pro_analog,
1096 }, {
1097 .type = EM28XX_VMUX_COMPOSITE,
1098 .vmux = TVP5150_COMPOSITE1,
1099 .amux = EM28XX_AMUX_LINE_IN,
1100 .gpio = pinnacle_hybrid_pro_analog,
1101 }, {
1102 .type = EM28XX_VMUX_SVIDEO,
1103 .vmux = TVP5150_SVIDEO,
1104 .amux = EM28XX_AMUX_LINE_IN,
1105 .gpio = pinnacle_hybrid_pro_analog,
1106 } },
1107 },
1108
1109 /* Those boards with em2870 are DVB Only*/
1110
1111 [EM2870_BOARD_TERRATEC_XS] = {
1112 .name = "Terratec Cinergy T XS",
1113 .valid = EM28XX_BOARD_NOT_VALIDATED,
1114 .tuner_type = TUNER_XC2028,
1115 .tuner_gpio = default_tuner_gpio,
1116 },
1117 [EM2870_BOARD_TERRATEC_XS_MT2060] = {
1118 .name = "Terratec Cinergy T XS (MT2060)",
1119 .xclk = EM28XX_XCLK_IR_RC5_MODE |
1120 EM28XX_XCLK_FREQUENCY_12MHZ,
1121 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE,
1122 .tuner_type = TUNER_ABSENT, /* MT2060 */
1123 .has_dvb = 1,
1124 .tuner_gpio = default_tuner_gpio,
1125 },
1126 [EM2870_BOARD_KWORLD_350U] = {
1127 .name = "Kworld 350 U DVB-T",
1128 .valid = EM28XX_BOARD_NOT_VALIDATED,
1129 .tuner_type = TUNER_XC2028,
1130 .tuner_gpio = default_tuner_gpio,
1131 },
1132 [EM2870_BOARD_KWORLD_355U] = {
1133 .name = "Kworld 355 U DVB-T",
1134 .valid = EM28XX_BOARD_NOT_VALIDATED,
1135 .tuner_type = TUNER_ABSENT,
1136 .tuner_gpio = default_tuner_gpio,
1137 .has_dvb = 1,
1138 .dvb_gpio = default_digital,
1139 },
1140 [EM2870_BOARD_PINNACLE_PCTV_DVB] = {
1141 .name = "Pinnacle PCTV DVB-T",
1142 .valid = EM28XX_BOARD_NOT_VALIDATED,
1143 .tuner_type = TUNER_ABSENT, /* MT2060 */
1144 /* djh - I have serious doubts this is right... */
1145 .xclk = EM28XX_XCLK_IR_RC5_MODE |
1146 EM28XX_XCLK_FREQUENCY_10MHZ,
1147 },
1148 [EM2870_BOARD_COMPRO_VIDEOMATE] = {
1149 .name = "Compro, VideoMate U3",
1150 .valid = EM28XX_BOARD_NOT_VALIDATED,
1151 .tuner_type = TUNER_ABSENT, /* MT2060 */
1152 },
1153
1154 [EM2880_BOARD_TERRATEC_HYBRID_XS_FR] = {
1155 .name = "Terratec Hybrid XS Secam",
1156 .has_msp34xx = 1,
1157 .tuner_type = TUNER_XC2028,
1158 .tuner_gpio = default_tuner_gpio,
1159 .decoder = EM28XX_TVP5150,
1160 .has_dvb = 1,
1161 .dvb_gpio = terratec_cinergy_USB_XS_FR_digital,
1162 .input = { {
1163 .type = EM28XX_VMUX_TELEVISION,
1164 .vmux = TVP5150_COMPOSITE0,
1165 .amux = EM28XX_AMUX_VIDEO,
1166 .gpio = terratec_cinergy_USB_XS_FR_analog,
1167 }, {
1168 .type = EM28XX_VMUX_COMPOSITE,
1169 .vmux = TVP5150_COMPOSITE1,
1170 .amux = EM28XX_AMUX_LINE_IN,
1171 .gpio = terratec_cinergy_USB_XS_FR_analog,
1172 }, {
1173 .type = EM28XX_VMUX_SVIDEO,
1174 .vmux = TVP5150_SVIDEO,
1175 .amux = EM28XX_AMUX_LINE_IN,
1176 .gpio = terratec_cinergy_USB_XS_FR_analog,
1177 } },
1178 },
1179 [EM2884_BOARD_TERRATEC_H5] = {
1180 .name = "Terratec Cinergy H5",
1181 .has_dvb = 1,
1182 #if 0
1183 .tuner_type = TUNER_PHILIPS_TDA8290,
1184 .tuner_addr = 0x41,
1185 .dvb_gpio = terratec_h5_digital, /* FIXME: probably wrong */
1186 .tuner_gpio = terratec_h5_gpio,
1187 #else
1188 .tuner_type = TUNER_ABSENT,
1189 #endif
1190 .def_i2c_bus = 1,
1191 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
1192 EM28XX_I2C_FREQ_400_KHZ,
1193 },
1194 [EM2884_BOARD_HAUPPAUGE_WINTV_HVR_930C] = {
1195 .name = "Hauppauge WinTV HVR 930C",
1196 .has_dvb = 1,
1197 #if 0 /* FIXME: Add analog support */
1198 .tuner_type = TUNER_XC5000,
1199 .tuner_addr = 0x41,
1200 .dvb_gpio = hauppauge_930c_digital,
1201 .tuner_gpio = hauppauge_930c_gpio,
1202 #else
1203 .tuner_type = TUNER_ABSENT,
1204 #endif
1205 .ir_codes = RC_MAP_HAUPPAUGE,
1206 .def_i2c_bus = 1,
1207 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
1208 EM28XX_I2C_FREQ_400_KHZ,
1209 },
1210 [EM2884_BOARD_C3TECH_DIGITAL_DUO] = {
1211 .name = "C3 Tech Digital Duo HDTV/SDTV USB",
1212 .has_dvb = 1,
1213 /* FIXME: Add analog support - need a saa7136 driver */
1214 .tuner_type = TUNER_ABSENT, /* Digital-only TDA18271HD */
1215 .ir_codes = RC_MAP_EMPTY,
1216 .def_i2c_bus = 1,
1217 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE,
1218 .dvb_gpio = c3tech_digital_duo_digital,
1219 },
1220 [EM2884_BOARD_CINERGY_HTC_STICK] = {
1221 .name = "Terratec Cinergy HTC Stick",
1222 .has_dvb = 1,
1223 .ir_codes = RC_MAP_NEC_TERRATEC_CINERGY_XS,
1224 .tuner_type = TUNER_ABSENT,
1225 .def_i2c_bus = 1,
1226 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
1227 EM28XX_I2C_FREQ_400_KHZ,
1228 },
1229 [EM2884_BOARD_ELGATO_EYETV_HYBRID_2008] = {
1230 .name = "Elgato EyeTV Hybrid 2008 INT",
1231 .has_dvb = 1,
1232 .ir_codes = RC_MAP_NEC_TERRATEC_CINERGY_XS,
1233 .tuner_type = TUNER_ABSENT,
1234 .def_i2c_bus = 1,
1235 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
1236 EM28XX_I2C_FREQ_400_KHZ,
1237 },
1238 [EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900] = {
1239 .name = "Hauppauge WinTV HVR 900",
1240 .tda9887_conf = TDA9887_PRESENT,
1241 .tuner_type = TUNER_XC2028,
1242 .tuner_gpio = default_tuner_gpio,
1243 .mts_firmware = 1,
1244 .has_dvb = 1,
1245 .dvb_gpio = hauppauge_wintv_hvr_900_digital,
1246 .ir_codes = RC_MAP_HAUPPAUGE,
1247 .decoder = EM28XX_TVP5150,
1248 .input = { {
1249 .type = EM28XX_VMUX_TELEVISION,
1250 .vmux = TVP5150_COMPOSITE0,
1251 .amux = EM28XX_AMUX_VIDEO,
1252 .gpio = hauppauge_wintv_hvr_900_analog,
1253 }, {
1254 .type = EM28XX_VMUX_COMPOSITE,
1255 .vmux = TVP5150_COMPOSITE1,
1256 .amux = EM28XX_AMUX_LINE_IN,
1257 .gpio = hauppauge_wintv_hvr_900_analog,
1258 }, {
1259 .type = EM28XX_VMUX_SVIDEO,
1260 .vmux = TVP5150_SVIDEO,
1261 .amux = EM28XX_AMUX_LINE_IN,
1262 .gpio = hauppauge_wintv_hvr_900_analog,
1263 } },
1264 },
1265 [EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2] = {
1266 .name = "Hauppauge WinTV HVR 900 (R2)",
1267 .tda9887_conf = TDA9887_PRESENT,
1268 .tuner_type = TUNER_XC2028,
1269 .tuner_gpio = default_tuner_gpio,
1270 .mts_firmware = 1,
1271 .has_dvb = 1,
1272 .dvb_gpio = hauppauge_wintv_hvr_900R2_digital,
1273 .ir_codes = RC_MAP_HAUPPAUGE,
1274 .decoder = EM28XX_TVP5150,
1275 .input = { {
1276 .type = EM28XX_VMUX_TELEVISION,
1277 .vmux = TVP5150_COMPOSITE0,
1278 .amux = EM28XX_AMUX_VIDEO,
1279 .gpio = hauppauge_wintv_hvr_900_analog,
1280 }, {
1281 .type = EM28XX_VMUX_COMPOSITE,
1282 .vmux = TVP5150_COMPOSITE1,
1283 .amux = EM28XX_AMUX_LINE_IN,
1284 .gpio = hauppauge_wintv_hvr_900_analog,
1285 }, {
1286 .type = EM28XX_VMUX_SVIDEO,
1287 .vmux = TVP5150_SVIDEO,
1288 .amux = EM28XX_AMUX_LINE_IN,
1289 .gpio = hauppauge_wintv_hvr_900_analog,
1290 } },
1291 },
1292 [EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850] = {
1293 .name = "Hauppauge WinTV HVR 850",
1294 .tuner_type = TUNER_XC2028,
1295 .tuner_gpio = default_tuner_gpio,
1296 .mts_firmware = 1,
1297 .has_dvb = 1,
1298 .dvb_gpio = hauppauge_wintv_hvr_900_digital,
1299 .ir_codes = RC_MAP_HAUPPAUGE,
1300 .decoder = EM28XX_TVP5150,
1301 .input = { {
1302 .type = EM28XX_VMUX_TELEVISION,
1303 .vmux = TVP5150_COMPOSITE0,
1304 .amux = EM28XX_AMUX_VIDEO,
1305 .gpio = hauppauge_wintv_hvr_900_analog,
1306 }, {
1307 .type = EM28XX_VMUX_COMPOSITE,
1308 .vmux = TVP5150_COMPOSITE1,
1309 .amux = EM28XX_AMUX_LINE_IN,
1310 .gpio = hauppauge_wintv_hvr_900_analog,
1311 }, {
1312 .type = EM28XX_VMUX_SVIDEO,
1313 .vmux = TVP5150_SVIDEO,
1314 .amux = EM28XX_AMUX_LINE_IN,
1315 .gpio = hauppauge_wintv_hvr_900_analog,
1316 } },
1317 },
1318 [EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950] = {
1319 .name = "Hauppauge WinTV HVR 950",
1320 .tuner_type = TUNER_XC2028,
1321 .tuner_gpio = default_tuner_gpio,
1322 .mts_firmware = 1,
1323 .has_dvb = 1,
1324 .dvb_gpio = hauppauge_wintv_hvr_900_digital,
1325 .ir_codes = RC_MAP_HAUPPAUGE,
1326 .decoder = EM28XX_TVP5150,
1327 .input = { {
1328 .type = EM28XX_VMUX_TELEVISION,
1329 .vmux = TVP5150_COMPOSITE0,
1330 .amux = EM28XX_AMUX_VIDEO,
1331 .gpio = hauppauge_wintv_hvr_900_analog,
1332 }, {
1333 .type = EM28XX_VMUX_COMPOSITE,
1334 .vmux = TVP5150_COMPOSITE1,
1335 .amux = EM28XX_AMUX_LINE_IN,
1336 .gpio = hauppauge_wintv_hvr_900_analog,
1337 }, {
1338 .type = EM28XX_VMUX_SVIDEO,
1339 .vmux = TVP5150_SVIDEO,
1340 .amux = EM28XX_AMUX_LINE_IN,
1341 .gpio = hauppauge_wintv_hvr_900_analog,
1342 } },
1343 },
1344 [EM2880_BOARD_PINNACLE_PCTV_HD_PRO] = {
1345 .name = "Pinnacle PCTV HD Pro Stick",
1346 .tuner_type = TUNER_XC2028,
1347 .tuner_gpio = default_tuner_gpio,
1348 .mts_firmware = 1,
1349 .has_dvb = 1,
1350 .dvb_gpio = hauppauge_wintv_hvr_900_digital,
1351 .ir_codes = RC_MAP_PINNACLE_PCTV_HD,
1352 .decoder = EM28XX_TVP5150,
1353 .input = { {
1354 .type = EM28XX_VMUX_TELEVISION,
1355 .vmux = TVP5150_COMPOSITE0,
1356 .amux = EM28XX_AMUX_VIDEO,
1357 .gpio = hauppauge_wintv_hvr_900_analog,
1358 }, {
1359 .type = EM28XX_VMUX_COMPOSITE,
1360 .vmux = TVP5150_COMPOSITE1,
1361 .amux = EM28XX_AMUX_LINE_IN,
1362 .gpio = hauppauge_wintv_hvr_900_analog,
1363 }, {
1364 .type = EM28XX_VMUX_SVIDEO,
1365 .vmux = TVP5150_SVIDEO,
1366 .amux = EM28XX_AMUX_LINE_IN,
1367 .gpio = hauppauge_wintv_hvr_900_analog,
1368 } },
1369 },
1370 [EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600] = {
1371 .name = "AMD ATI TV Wonder HD 600",
1372 .tuner_type = TUNER_XC2028,
1373 .tuner_gpio = default_tuner_gpio,
1374 .mts_firmware = 1,
1375 .has_dvb = 1,
1376 .dvb_gpio = hauppauge_wintv_hvr_900_digital,
1377 .ir_codes = RC_MAP_ATI_TV_WONDER_HD_600,
1378 .decoder = EM28XX_TVP5150,
1379 .input = { {
1380 .type = EM28XX_VMUX_TELEVISION,
1381 .vmux = TVP5150_COMPOSITE0,
1382 .amux = EM28XX_AMUX_VIDEO,
1383 .gpio = hauppauge_wintv_hvr_900_analog,
1384 }, {
1385 .type = EM28XX_VMUX_COMPOSITE,
1386 .vmux = TVP5150_COMPOSITE1,
1387 .amux = EM28XX_AMUX_LINE_IN,
1388 .gpio = hauppauge_wintv_hvr_900_analog,
1389 }, {
1390 .type = EM28XX_VMUX_SVIDEO,
1391 .vmux = TVP5150_SVIDEO,
1392 .amux = EM28XX_AMUX_LINE_IN,
1393 .gpio = hauppauge_wintv_hvr_900_analog,
1394 } },
1395 },
1396 [EM2880_BOARD_TERRATEC_HYBRID_XS] = {
1397 .name = "Terratec Hybrid XS",
1398 .tuner_type = TUNER_XC2028,
1399 .tuner_gpio = default_tuner_gpio,
1400 .decoder = EM28XX_TVP5150,
1401 .has_dvb = 1,
1402 .dvb_gpio = default_digital,
1403 .ir_codes = RC_MAP_TERRATEC_CINERGY_XS,
1404 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, /* NEC IR */
1405 .input = { {
1406 .type = EM28XX_VMUX_TELEVISION,
1407 .vmux = TVP5150_COMPOSITE0,
1408 .amux = EM28XX_AMUX_VIDEO,
1409 .gpio = default_analog,
1410 }, {
1411 .type = EM28XX_VMUX_COMPOSITE,
1412 .vmux = TVP5150_COMPOSITE1,
1413 .amux = EM28XX_AMUX_LINE_IN,
1414 .gpio = default_analog,
1415 }, {
1416 .type = EM28XX_VMUX_SVIDEO,
1417 .vmux = TVP5150_SVIDEO,
1418 .amux = EM28XX_AMUX_LINE_IN,
1419 .gpio = default_analog,
1420 } },
1421 },
1422 /* maybe there's a reason behind it why Terratec sells the Hybrid XS
1423 as Prodigy XS with a different PID, let's keep it separated for now
1424 maybe we'll need it lateron */
1425 [EM2880_BOARD_TERRATEC_PRODIGY_XS] = {
1426 .name = "Terratec Prodigy XS",
1427 .tuner_type = TUNER_XC2028,
1428 .tuner_gpio = default_tuner_gpio,
1429 .decoder = EM28XX_TVP5150,
1430 .input = { {
1431 .type = EM28XX_VMUX_TELEVISION,
1432 .vmux = TVP5150_COMPOSITE0,
1433 .amux = EM28XX_AMUX_VIDEO,
1434 .gpio = hauppauge_wintv_hvr_900_analog,
1435 }, {
1436 .type = EM28XX_VMUX_COMPOSITE,
1437 .vmux = TVP5150_COMPOSITE1,
1438 .amux = EM28XX_AMUX_LINE_IN,
1439 .gpio = hauppauge_wintv_hvr_900_analog,
1440 }, {
1441 .type = EM28XX_VMUX_SVIDEO,
1442 .vmux = TVP5150_SVIDEO,
1443 .amux = EM28XX_AMUX_LINE_IN,
1444 .gpio = hauppauge_wintv_hvr_900_analog,
1445 } },
1446 },
1447 [EM2820_BOARD_MSI_VOX_USB_2] = {
1448 .name = "MSI VOX USB 2.0",
1449 .tuner_type = TUNER_LG_PAL_NEW_TAPC,
1450 .tda9887_conf = TDA9887_PRESENT |
1451 TDA9887_PORT1_ACTIVE |
1452 TDA9887_PORT2_ACTIVE,
1453 .max_range_640_480 = 1,
1454 .decoder = EM28XX_SAA711X,
1455 .input = { {
1456 .type = EM28XX_VMUX_TELEVISION,
1457 .vmux = SAA7115_COMPOSITE4,
1458 .amux = EM28XX_AMUX_VIDEO,
1459 }, {
1460 .type = EM28XX_VMUX_COMPOSITE,
1461 .vmux = SAA7115_COMPOSITE0,
1462 .amux = EM28XX_AMUX_LINE_IN,
1463 }, {
1464 .type = EM28XX_VMUX_SVIDEO,
1465 .vmux = SAA7115_SVIDEO3,
1466 .amux = EM28XX_AMUX_LINE_IN,
1467 } },
1468 },
1469 [EM2800_BOARD_TERRATEC_CINERGY_200] = {
1470 .name = "Terratec Cinergy 200 USB",
1471 .is_em2800 = 1,
1472 .has_ir_i2c = 1,
1473 .tuner_type = TUNER_LG_TALN,
1474 .tda9887_conf = TDA9887_PRESENT,
1475 .decoder = EM28XX_SAA711X,
1476 .input = { {
1477 .type = EM28XX_VMUX_TELEVISION,
1478 .vmux = SAA7115_COMPOSITE2,
1479 .amux = EM28XX_AMUX_VIDEO,
1480 }, {
1481 .type = EM28XX_VMUX_COMPOSITE,
1482 .vmux = SAA7115_COMPOSITE0,
1483 .amux = EM28XX_AMUX_LINE_IN,
1484 }, {
1485 .type = EM28XX_VMUX_SVIDEO,
1486 .vmux = SAA7115_SVIDEO3,
1487 .amux = EM28XX_AMUX_LINE_IN,
1488 } },
1489 },
1490 [EM2800_BOARD_GRABBEEX_USB2800] = {
1491 .name = "eMPIA Technology, Inc. GrabBeeX+ Video Encoder",
1492 .is_em2800 = 1,
1493 .decoder = EM28XX_SAA711X,
1494 .tuner_type = TUNER_ABSENT, /* capture only board */
1495 .input = { {
1496 .type = EM28XX_VMUX_COMPOSITE,
1497 .vmux = SAA7115_COMPOSITE0,
1498 .amux = EM28XX_AMUX_LINE_IN,
1499 }, {
1500 .type = EM28XX_VMUX_SVIDEO,
1501 .vmux = SAA7115_SVIDEO3,
1502 .amux = EM28XX_AMUX_LINE_IN,
1503 } },
1504 },
1505 [EM2800_BOARD_VC211A] = {
1506 .name = "Actionmaster/LinXcel/Digitus VC211A",
1507 .is_em2800 = 1,
1508 .tuner_type = TUNER_ABSENT, /* Capture-only board */
1509 .decoder = EM28XX_SAA711X,
1510 .input = { {
1511 .type = EM28XX_VMUX_COMPOSITE,
1512 .vmux = SAA7115_COMPOSITE0,
1513 .amux = EM28XX_AMUX_LINE_IN,
1514 .gpio = vc211a_enable,
1515 }, {
1516 .type = EM28XX_VMUX_SVIDEO,
1517 .vmux = SAA7115_SVIDEO3,
1518 .amux = EM28XX_AMUX_LINE_IN,
1519 .gpio = vc211a_enable,
1520 } },
1521 },
1522 [EM2800_BOARD_LEADTEK_WINFAST_USBII] = {
1523 .name = "Leadtek Winfast USB II",
1524 .is_em2800 = 1,
1525 .tuner_type = TUNER_LG_PAL_NEW_TAPC,
1526 .tda9887_conf = TDA9887_PRESENT,
1527 .decoder = EM28XX_SAA711X,
1528 .input = { {
1529 .type = EM28XX_VMUX_TELEVISION,
1530 .vmux = SAA7115_COMPOSITE2,
1531 .amux = EM28XX_AMUX_VIDEO,
1532 }, {
1533 .type = EM28XX_VMUX_COMPOSITE,
1534 .vmux = SAA7115_COMPOSITE0,
1535 .amux = EM28XX_AMUX_LINE_IN,
1536 }, {
1537 .type = EM28XX_VMUX_SVIDEO,
1538 .vmux = SAA7115_SVIDEO3,
1539 .amux = EM28XX_AMUX_LINE_IN,
1540 } },
1541 },
1542 [EM2800_BOARD_KWORLD_USB2800] = {
1543 .name = "Kworld USB2800",
1544 .is_em2800 = 1,
1545 .tuner_type = TUNER_PHILIPS_FCV1236D,
1546 .tda9887_conf = TDA9887_PRESENT,
1547 .decoder = EM28XX_SAA711X,
1548 .input = { {
1549 .type = EM28XX_VMUX_TELEVISION,
1550 .vmux = SAA7115_COMPOSITE2,
1551 .amux = EM28XX_AMUX_VIDEO,
1552 }, {
1553 .type = EM28XX_VMUX_COMPOSITE,
1554 .vmux = SAA7115_COMPOSITE0,
1555 .amux = EM28XX_AMUX_LINE_IN,
1556 }, {
1557 .type = EM28XX_VMUX_SVIDEO,
1558 .vmux = SAA7115_SVIDEO3,
1559 .amux = EM28XX_AMUX_LINE_IN,
1560 } },
1561 },
1562 [EM2820_BOARD_PINNACLE_DVC_90] = {
1563 .name = "Pinnacle Dazzle DVC 90/100/101/107 / Kaiser Baas Video to DVD maker "
1564 "/ Kworld DVD Maker 2 / Plextor ConvertX PX-AV100U",
1565 .tuner_type = TUNER_ABSENT, /* capture only board */
1566 .decoder = EM28XX_SAA711X,
1567 .input = { {
1568 .type = EM28XX_VMUX_COMPOSITE,
1569 .vmux = SAA7115_COMPOSITE0,
1570 .amux = EM28XX_AMUX_LINE_IN,
1571 }, {
1572 .type = EM28XX_VMUX_SVIDEO,
1573 .vmux = SAA7115_SVIDEO3,
1574 .amux = EM28XX_AMUX_LINE_IN,
1575 } },
1576 },
1577 [EM2800_BOARD_VGEAR_POCKETTV] = {
1578 .name = "V-Gear PocketTV",
1579 .is_em2800 = 1,
1580 .tuner_type = TUNER_LG_PAL_NEW_TAPC,
1581 .tda9887_conf = TDA9887_PRESENT,
1582 .decoder = EM28XX_SAA711X,
1583 .input = { {
1584 .type = EM28XX_VMUX_TELEVISION,
1585 .vmux = SAA7115_COMPOSITE2,
1586 .amux = EM28XX_AMUX_VIDEO,
1587 }, {
1588 .type = EM28XX_VMUX_COMPOSITE,
1589 .vmux = SAA7115_COMPOSITE0,
1590 .amux = EM28XX_AMUX_LINE_IN,
1591 }, {
1592 .type = EM28XX_VMUX_SVIDEO,
1593 .vmux = SAA7115_SVIDEO3,
1594 .amux = EM28XX_AMUX_LINE_IN,
1595 } },
1596 },
1597 [EM2820_BOARD_PROLINK_PLAYTV_BOX4_USB2] = {
1598 .name = "Pixelview PlayTV Box 4 USB 2.0",
1599 .tda9887_conf = TDA9887_PRESENT,
1600 .tuner_type = TUNER_YMEC_TVF_5533MF,
1601 .decoder = EM28XX_SAA711X,
1602 .input = { {
1603 .type = EM28XX_VMUX_TELEVISION,
1604 .vmux = SAA7115_COMPOSITE2,
1605 .amux = EM28XX_AMUX_VIDEO,
1606 .aout = EM28XX_AOUT_MONO | /* I2S */
1607 EM28XX_AOUT_MASTER, /* Line out pin */
1608 }, {
1609 .type = EM28XX_VMUX_COMPOSITE,
1610 .vmux = SAA7115_COMPOSITE0,
1611 .amux = EM28XX_AMUX_LINE_IN,
1612 }, {
1613 .type = EM28XX_VMUX_SVIDEO,
1614 .vmux = SAA7115_SVIDEO3,
1615 .amux = EM28XX_AMUX_LINE_IN,
1616 } },
1617 },
1618 [EM2820_BOARD_PROLINK_PLAYTV_USB2] = {
1619 .name = "SIIG AVTuner-PVR / Pixelview Prolink PlayTV USB 2.0",
1620 .buttons = std_snapshot_button,
1621 .tda9887_conf = TDA9887_PRESENT,
1622 .tuner_type = TUNER_YMEC_TVF_5533MF,
1623 .tuner_addr = 0x60,
1624 .decoder = EM28XX_SAA711X,
1625 .input = { {
1626 .type = EM28XX_VMUX_TELEVISION,
1627 .vmux = SAA7115_COMPOSITE2,
1628 .amux = EM28XX_AMUX_VIDEO,
1629 .aout = EM28XX_AOUT_MONO | /* I2S */
1630 EM28XX_AOUT_MASTER, /* Line out pin */
1631 }, {
1632 .type = EM28XX_VMUX_COMPOSITE,
1633 .vmux = SAA7115_COMPOSITE0,
1634 .amux = EM28XX_AMUX_LINE_IN,
1635 }, {
1636 .type = EM28XX_VMUX_SVIDEO,
1637 .vmux = SAA7115_SVIDEO3,
1638 .amux = EM28XX_AMUX_LINE_IN,
1639 } },
1640 },
1641 [EM2860_BOARD_SAA711X_REFERENCE_DESIGN] = {
1642 .name = "EM2860/SAA711X Reference Design",
1643 .buttons = std_snapshot_button,
1644 .tuner_type = TUNER_ABSENT,
1645 .decoder = EM28XX_SAA711X,
1646 .input = { {
1647 .type = EM28XX_VMUX_SVIDEO,
1648 .vmux = SAA7115_SVIDEO3,
1649 }, {
1650 .type = EM28XX_VMUX_COMPOSITE,
1651 .vmux = SAA7115_COMPOSITE0,
1652 } },
1653 },
1654
1655 [EM2874_BOARD_LEADERSHIP_ISDBT] = {
1656 .def_i2c_bus = 1,
1657 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
1658 EM28XX_I2C_FREQ_100_KHZ,
1659 .xclk = EM28XX_XCLK_FREQUENCY_10MHZ,
1660 .name = "EM2874 Leadership ISDBT",
1661 .tuner_type = TUNER_ABSENT,
1662 .tuner_gpio = leadership_reset,
1663 .dvb_gpio = leadership_digital,
1664 .has_dvb = 1,
1665 },
1666
1667 [EM2880_BOARD_MSI_DIGIVOX_AD] = {
1668 .name = "MSI DigiVox A/D",
1669 .valid = EM28XX_BOARD_NOT_VALIDATED,
1670 .tuner_type = TUNER_XC2028,
1671 .tuner_gpio = default_tuner_gpio,
1672 .decoder = EM28XX_TVP5150,
1673 .input = { {
1674 .type = EM28XX_VMUX_TELEVISION,
1675 .vmux = TVP5150_COMPOSITE0,
1676 .amux = EM28XX_AMUX_VIDEO,
1677 .gpio = em2880_msi_digivox_ad_analog,
1678 }, {
1679 .type = EM28XX_VMUX_COMPOSITE,
1680 .vmux = TVP5150_COMPOSITE1,
1681 .amux = EM28XX_AMUX_LINE_IN,
1682 .gpio = em2880_msi_digivox_ad_analog,
1683 }, {
1684 .type = EM28XX_VMUX_SVIDEO,
1685 .vmux = TVP5150_SVIDEO,
1686 .amux = EM28XX_AMUX_LINE_IN,
1687 .gpio = em2880_msi_digivox_ad_analog,
1688 } },
1689 },
1690 [EM2880_BOARD_MSI_DIGIVOX_AD_II] = {
1691 .name = "MSI DigiVox A/D II",
1692 .valid = EM28XX_BOARD_NOT_VALIDATED,
1693 .tuner_type = TUNER_XC2028,
1694 .tuner_gpio = default_tuner_gpio,
1695 .decoder = EM28XX_TVP5150,
1696 .input = { {
1697 .type = EM28XX_VMUX_TELEVISION,
1698 .vmux = TVP5150_COMPOSITE0,
1699 .amux = EM28XX_AMUX_VIDEO,
1700 .gpio = em2880_msi_digivox_ad_analog,
1701 }, {
1702 .type = EM28XX_VMUX_COMPOSITE,
1703 .vmux = TVP5150_COMPOSITE1,
1704 .amux = EM28XX_AMUX_LINE_IN,
1705 .gpio = em2880_msi_digivox_ad_analog,
1706 }, {
1707 .type = EM28XX_VMUX_SVIDEO,
1708 .vmux = TVP5150_SVIDEO,
1709 .amux = EM28XX_AMUX_LINE_IN,
1710 .gpio = em2880_msi_digivox_ad_analog,
1711 } },
1712 },
1713 [EM2880_BOARD_KWORLD_DVB_305U] = {
1714 .name = "KWorld DVB-T 305U",
1715 .tuner_type = TUNER_XC2028,
1716 .tuner_gpio = default_tuner_gpio,
1717 .decoder = EM28XX_TVP5150,
1718 .input = { {
1719 .type = EM28XX_VMUX_TELEVISION,
1720 .vmux = TVP5150_COMPOSITE0,
1721 .amux = EM28XX_AMUX_VIDEO,
1722 }, {
1723 .type = EM28XX_VMUX_COMPOSITE,
1724 .vmux = TVP5150_COMPOSITE1,
1725 .amux = EM28XX_AMUX_LINE_IN,
1726 }, {
1727 .type = EM28XX_VMUX_SVIDEO,
1728 .vmux = TVP5150_SVIDEO,
1729 .amux = EM28XX_AMUX_LINE_IN,
1730 } },
1731 },
1732 [EM2880_BOARD_KWORLD_DVB_310U] = {
1733 .name = "KWorld DVB-T 310U",
1734 .tuner_type = TUNER_XC2028,
1735 .tuner_gpio = default_tuner_gpio,
1736 .has_dvb = 1,
1737 .dvb_gpio = default_digital,
1738 .mts_firmware = 1,
1739 .decoder = EM28XX_TVP5150,
1740 .input = { {
1741 .type = EM28XX_VMUX_TELEVISION,
1742 .vmux = TVP5150_COMPOSITE0,
1743 .amux = EM28XX_AMUX_VIDEO,
1744 .gpio = default_analog,
1745 }, {
1746 .type = EM28XX_VMUX_COMPOSITE,
1747 .vmux = TVP5150_COMPOSITE1,
1748 .amux = EM28XX_AMUX_LINE_IN,
1749 .gpio = default_analog,
1750 }, { /* S-video has not been tested yet */
1751 .type = EM28XX_VMUX_SVIDEO,
1752 .vmux = TVP5150_SVIDEO,
1753 .amux = EM28XX_AMUX_LINE_IN,
1754 .gpio = default_analog,
1755 } },
1756 },
1757 [EM2882_BOARD_KWORLD_ATSC_315U] = {
1758 .name = "KWorld ATSC 315U HDTV TV Box",
1759 .valid = EM28XX_BOARD_NOT_VALIDATED,
1760 .tuner_type = TUNER_THOMSON_DTT761X,
1761 .tuner_gpio = em2882_kworld_315u_tuner_gpio,
1762 .tda9887_conf = TDA9887_PRESENT,
1763 .decoder = EM28XX_SAA711X,
1764 .has_dvb = 1,
1765 .dvb_gpio = em2882_kworld_315u_digital,
1766 .ir_codes = RC_MAP_KWORLD_315U,
1767 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ,
1768 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE,
1769 /* Analog mode - still not ready */
1770 /*.input = { {
1771 .type = EM28XX_VMUX_TELEVISION,
1772 .vmux = SAA7115_COMPOSITE2,
1773 .amux = EM28XX_AMUX_VIDEO,
1774 .gpio = em2882_kworld_315u_analog,
1775 .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO,
1776 }, {
1777 .type = EM28XX_VMUX_COMPOSITE,
1778 .vmux = SAA7115_COMPOSITE0,
1779 .amux = EM28XX_AMUX_LINE_IN,
1780 .gpio = em2882_kworld_315u_analog1,
1781 .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO,
1782 }, {
1783 .type = EM28XX_VMUX_SVIDEO,
1784 .vmux = SAA7115_SVIDEO3,
1785 .amux = EM28XX_AMUX_LINE_IN,
1786 .gpio = em2882_kworld_315u_analog1,
1787 .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO,
1788 } }, */
1789 },
1790 [EM2880_BOARD_EMPIRE_DUAL_TV] = {
1791 .name = "Empire dual TV",
1792 .tuner_type = TUNER_XC2028,
1793 .tuner_gpio = default_tuner_gpio,
1794 .has_dvb = 1,
1795 .dvb_gpio = default_digital,
1796 .mts_firmware = 1,
1797 .decoder = EM28XX_TVP5150,
1798 .input = { {
1799 .type = EM28XX_VMUX_TELEVISION,
1800 .vmux = TVP5150_COMPOSITE0,
1801 .amux = EM28XX_AMUX_VIDEO,
1802 .gpio = default_analog,
1803 }, {
1804 .type = EM28XX_VMUX_COMPOSITE,
1805 .vmux = TVP5150_COMPOSITE1,
1806 .amux = EM28XX_AMUX_LINE_IN,
1807 .gpio = default_analog,
1808 }, {
1809 .type = EM28XX_VMUX_SVIDEO,
1810 .vmux = TVP5150_SVIDEO,
1811 .amux = EM28XX_AMUX_LINE_IN,
1812 .gpio = default_analog,
1813 } },
1814 },
1815 [EM2881_BOARD_DNT_DA2_HYBRID] = {
1816 .name = "DNT DA2 Hybrid",
1817 .valid = EM28XX_BOARD_NOT_VALIDATED,
1818 .tuner_type = TUNER_XC2028,
1819 .tuner_gpio = default_tuner_gpio,
1820 .decoder = EM28XX_TVP5150,
1821 .input = { {
1822 .type = EM28XX_VMUX_TELEVISION,
1823 .vmux = TVP5150_COMPOSITE0,
1824 .amux = EM28XX_AMUX_VIDEO,
1825 .gpio = default_analog,
1826 }, {
1827 .type = EM28XX_VMUX_COMPOSITE,
1828 .vmux = TVP5150_COMPOSITE1,
1829 .amux = EM28XX_AMUX_LINE_IN,
1830 .gpio = default_analog,
1831 }, {
1832 .type = EM28XX_VMUX_SVIDEO,
1833 .vmux = TVP5150_SVIDEO,
1834 .amux = EM28XX_AMUX_LINE_IN,
1835 .gpio = default_analog,
1836 } },
1837 },
1838 [EM2881_BOARD_PINNACLE_HYBRID_PRO] = {
1839 .name = "Pinnacle Hybrid Pro",
1840 .tuner_type = TUNER_XC2028,
1841 .tuner_gpio = default_tuner_gpio,
1842 .decoder = EM28XX_TVP5150,
1843 .has_dvb = 1,
1844 .dvb_gpio = pinnacle_hybrid_pro_digital,
1845 .input = { {
1846 .type = EM28XX_VMUX_TELEVISION,
1847 .vmux = TVP5150_COMPOSITE0,
1848 .amux = EM28XX_AMUX_VIDEO,
1849 .gpio = pinnacle_hybrid_pro_analog,
1850 }, {
1851 .type = EM28XX_VMUX_COMPOSITE,
1852 .vmux = TVP5150_COMPOSITE1,
1853 .amux = EM28XX_AMUX_LINE_IN,
1854 .gpio = pinnacle_hybrid_pro_analog,
1855 }, {
1856 .type = EM28XX_VMUX_SVIDEO,
1857 .vmux = TVP5150_SVIDEO,
1858 .amux = EM28XX_AMUX_LINE_IN,
1859 .gpio = pinnacle_hybrid_pro_analog,
1860 } },
1861 },
1862 [EM2882_BOARD_PINNACLE_HYBRID_PRO_330E] = {
1863 .name = "Pinnacle Hybrid Pro (330e)",
1864 .tuner_type = TUNER_XC2028,
1865 .tuner_gpio = default_tuner_gpio,
1866 .mts_firmware = 1,
1867 .has_dvb = 1,
1868 .dvb_gpio = hauppauge_wintv_hvr_900R2_digital,
1869 .ir_codes = RC_MAP_PINNACLE_PCTV_HD,
1870 .decoder = EM28XX_TVP5150,
1871 .input = { {
1872 .type = EM28XX_VMUX_TELEVISION,
1873 .vmux = TVP5150_COMPOSITE0,
1874 .amux = EM28XX_AMUX_VIDEO,
1875 .gpio = hauppauge_wintv_hvr_900_analog,
1876 }, {
1877 .type = EM28XX_VMUX_COMPOSITE,
1878 .vmux = TVP5150_COMPOSITE1,
1879 .amux = EM28XX_AMUX_LINE_IN,
1880 .gpio = hauppauge_wintv_hvr_900_analog,
1881 }, {
1882 .type = EM28XX_VMUX_SVIDEO,
1883 .vmux = TVP5150_SVIDEO,
1884 .amux = EM28XX_AMUX_LINE_IN,
1885 .gpio = hauppauge_wintv_hvr_900_analog,
1886 } },
1887 },
1888 [EM2882_BOARD_KWORLD_VS_DVBT] = {
1889 .name = "Kworld VS-DVB-T 323UR",
1890 .tuner_type = TUNER_XC2028,
1891 .tuner_gpio = default_tuner_gpio,
1892 .decoder = EM28XX_TVP5150,
1893 .mts_firmware = 1,
1894 .has_dvb = 1,
1895 .dvb_gpio = kworld_330u_digital,
1896 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, /* NEC IR */
1897 .ir_codes = RC_MAP_KWORLD_315U,
1898 .input = { {
1899 .type = EM28XX_VMUX_TELEVISION,
1900 .vmux = TVP5150_COMPOSITE0,
1901 .amux = EM28XX_AMUX_VIDEO,
1902 }, {
1903 .type = EM28XX_VMUX_COMPOSITE,
1904 .vmux = TVP5150_COMPOSITE1,
1905 .amux = EM28XX_AMUX_LINE_IN,
1906 }, {
1907 .type = EM28XX_VMUX_SVIDEO,
1908 .vmux = TVP5150_SVIDEO,
1909 .amux = EM28XX_AMUX_LINE_IN,
1910 } },
1911 },
1912 [EM2882_BOARD_TERRATEC_HYBRID_XS] = {
1913 .name = "Terratec Cinnergy Hybrid T USB XS (em2882)",
1914 .tuner_type = TUNER_XC2028,
1915 .tuner_gpio = default_tuner_gpio,
1916 .mts_firmware = 1,
1917 .decoder = EM28XX_TVP5150,
1918 .has_dvb = 1,
1919 .dvb_gpio = hauppauge_wintv_hvr_900_digital,
1920 .ir_codes = RC_MAP_TERRATEC_CINERGY_XS,
1921 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ,
1922 .input = { {
1923 .type = EM28XX_VMUX_TELEVISION,
1924 .vmux = TVP5150_COMPOSITE0,
1925 .amux = EM28XX_AMUX_VIDEO,
1926 .gpio = hauppauge_wintv_hvr_900_analog,
1927 }, {
1928 .type = EM28XX_VMUX_COMPOSITE,
1929 .vmux = TVP5150_COMPOSITE1,
1930 .amux = EM28XX_AMUX_LINE_IN,
1931 .gpio = hauppauge_wintv_hvr_900_analog,
1932 }, {
1933 .type = EM28XX_VMUX_SVIDEO,
1934 .vmux = TVP5150_SVIDEO,
1935 .amux = EM28XX_AMUX_LINE_IN,
1936 .gpio = hauppauge_wintv_hvr_900_analog,
1937 } },
1938 },
1939 [EM2882_BOARD_DIKOM_DK300] = {
1940 .name = "Dikom DK300",
1941 .tuner_type = TUNER_XC2028,
1942 .tuner_gpio = default_tuner_gpio,
1943 .decoder = EM28XX_TVP5150,
1944 .mts_firmware = 1,
1945 .has_dvb = 1,
1946 .dvb_gpio = dikom_dk300_digital,
1947 .input = { {
1948 .type = EM28XX_VMUX_TELEVISION,
1949 .vmux = TVP5150_COMPOSITE0,
1950 .amux = EM28XX_AMUX_VIDEO,
1951 .gpio = default_analog,
1952 } },
1953 },
1954 [EM2883_BOARD_KWORLD_HYBRID_330U] = {
1955 .name = "Kworld PlusTV HD Hybrid 330",
1956 .tuner_type = TUNER_XC2028,
1957 .tuner_gpio = default_tuner_gpio,
1958 .decoder = EM28XX_TVP5150,
1959 .mts_firmware = 1,
1960 .has_dvb = 1,
1961 .dvb_gpio = kworld_330u_digital,
1962 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ,
1963 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
1964 EM28XX_I2C_EEPROM_ON_BOARD |
1965 EM28XX_I2C_EEPROM_KEY_VALID,
1966 .input = { {
1967 .type = EM28XX_VMUX_TELEVISION,
1968 .vmux = TVP5150_COMPOSITE0,
1969 .amux = EM28XX_AMUX_VIDEO,
1970 .gpio = kworld_330u_analog,
1971 .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO,
1972 }, {
1973 .type = EM28XX_VMUX_COMPOSITE,
1974 .vmux = TVP5150_COMPOSITE1,
1975 .amux = EM28XX_AMUX_LINE_IN,
1976 .gpio = kworld_330u_analog,
1977 .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO,
1978 }, {
1979 .type = EM28XX_VMUX_SVIDEO,
1980 .vmux = TVP5150_SVIDEO,
1981 .amux = EM28XX_AMUX_LINE_IN,
1982 .gpio = kworld_330u_analog,
1983 } },
1984 },
1985 [EM2820_BOARD_COMPRO_VIDEOMATE_FORYOU] = {
1986 .name = "Compro VideoMate ForYou/Stereo",
1987 .tuner_type = TUNER_LG_PAL_NEW_TAPC,
1988 .tvaudio_addr = 0xb0,
1989 .tda9887_conf = TDA9887_PRESENT,
1990 .decoder = EM28XX_TVP5150,
1991 .adecoder = EM28XX_TVAUDIO,
1992 .mute_gpio = compro_mute_gpio,
1993 .input = { {
1994 .type = EM28XX_VMUX_TELEVISION,
1995 .vmux = TVP5150_COMPOSITE0,
1996 .amux = EM28XX_AMUX_VIDEO,
1997 .gpio = compro_unmute_tv_gpio,
1998 }, {
1999 .type = EM28XX_VMUX_SVIDEO,
2000 .vmux = TVP5150_SVIDEO,
2001 .amux = EM28XX_AMUX_LINE_IN,
2002 .gpio = compro_unmute_svid_gpio,
2003 } },
2004 },
2005 [EM2860_BOARD_KAIOMY_TVNPC_U2] = {
2006 .name = "Kaiomy TVnPC U2",
2007 .vchannels = 3,
2008 .tuner_type = TUNER_XC2028,
2009 .tuner_addr = 0x61,
2010 .mts_firmware = 1,
2011 .decoder = EM28XX_TVP5150,
2012 .tuner_gpio = default_tuner_gpio,
2013 .ir_codes = RC_MAP_KAIOMY,
2014 .input = { {
2015 .type = EM28XX_VMUX_TELEVISION,
2016 .vmux = TVP5150_COMPOSITE0,
2017 .amux = EM28XX_AMUX_VIDEO,
2018
2019 }, {
2020 .type = EM28XX_VMUX_COMPOSITE,
2021 .vmux = TVP5150_COMPOSITE1,
2022 .amux = EM28XX_AMUX_LINE_IN,
2023 }, {
2024 .type = EM28XX_VMUX_SVIDEO,
2025 .vmux = TVP5150_SVIDEO,
2026 .amux = EM28XX_AMUX_LINE_IN,
2027 } },
2028 .radio = {
2029 .type = EM28XX_RADIO,
2030 .amux = EM28XX_AMUX_LINE_IN,
2031 }
2032 },
2033 [EM2860_BOARD_EASYCAP] = {
2034 .name = "Easy Cap Capture DC-60",
2035 .vchannels = 2,
2036 .tuner_type = TUNER_ABSENT,
2037 .decoder = EM28XX_SAA711X,
2038 .input = { {
2039 .type = EM28XX_VMUX_COMPOSITE,
2040 .vmux = SAA7115_COMPOSITE0,
2041 .amux = EM28XX_AMUX_LINE_IN,
2042 }, {
2043 .type = EM28XX_VMUX_SVIDEO,
2044 .vmux = SAA7115_SVIDEO3,
2045 .amux = EM28XX_AMUX_LINE_IN,
2046 } },
2047 },
2048 [EM2820_BOARD_IODATA_GVMVP_SZ] = {
2049 .name = "IO-DATA GV-MVP/SZ",
2050 .tuner_type = TUNER_PHILIPS_FM1236_MK3,
2051 .tuner_gpio = default_tuner_gpio,
2052 .tda9887_conf = TDA9887_PRESENT,
2053 .decoder = EM28XX_TVP5150,
2054 .input = { {
2055 .type = EM28XX_VMUX_TELEVISION,
2056 .vmux = TVP5150_COMPOSITE0,
2057 .amux = EM28XX_AMUX_VIDEO,
2058 }, { /* Composite has not been tested yet */
2059 .type = EM28XX_VMUX_COMPOSITE,
2060 .vmux = TVP5150_COMPOSITE1,
2061 .amux = EM28XX_AMUX_VIDEO,
2062 }, { /* S-video has not been tested yet */
2063 .type = EM28XX_VMUX_SVIDEO,
2064 .vmux = TVP5150_SVIDEO,
2065 .amux = EM28XX_AMUX_VIDEO,
2066 } },
2067 },
2068 [EM2860_BOARD_TERRATEC_GRABBY] = {
2069 .name = "Terratec Grabby",
2070 .vchannels = 2,
2071 .tuner_type = TUNER_ABSENT,
2072 .decoder = EM28XX_SAA711X,
2073 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ,
2074 .input = { {
2075 .type = EM28XX_VMUX_COMPOSITE,
2076 .vmux = SAA7115_COMPOSITE0,
2077 .amux = EM28XX_AMUX_LINE_IN,
2078 }, {
2079 .type = EM28XX_VMUX_SVIDEO,
2080 .vmux = SAA7115_SVIDEO3,
2081 .amux = EM28XX_AMUX_LINE_IN,
2082 } },
2083 .buttons = std_snapshot_button,
2084 .leds = terratec_grabby_leds,
2085 },
2086 [EM2860_BOARD_TERRATEC_AV350] = {
2087 .name = "Terratec AV350",
2088 .vchannels = 2,
2089 .tuner_type = TUNER_ABSENT,
2090 .decoder = EM28XX_TVP5150,
2091 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ,
2092 .mute_gpio = terratec_av350_mute_gpio,
2093 .input = { {
2094 .type = EM28XX_VMUX_COMPOSITE,
2095 .vmux = TVP5150_COMPOSITE1,
2096 .amux = EM28XX_AUDIO_SRC_LINE,
2097 .gpio = terratec_av350_unmute_gpio,
2098
2099 }, {
2100 .type = EM28XX_VMUX_SVIDEO,
2101 .vmux = TVP5150_SVIDEO,
2102 .amux = EM28XX_AUDIO_SRC_LINE,
2103 .gpio = terratec_av350_unmute_gpio,
2104 } },
2105 },
2106
2107 [EM2860_BOARD_ELGATO_VIDEO_CAPTURE] = {
2108 .name = "Elgato Video Capture",
2109 .decoder = EM28XX_SAA711X,
2110 .tuner_type = TUNER_ABSENT, /* Capture only device */
2111 .input = { {
2112 .type = EM28XX_VMUX_COMPOSITE,
2113 .vmux = SAA7115_COMPOSITE0,
2114 .amux = EM28XX_AMUX_LINE_IN,
2115 }, {
2116 .type = EM28XX_VMUX_SVIDEO,
2117 .vmux = SAA7115_SVIDEO3,
2118 .amux = EM28XX_AMUX_LINE_IN,
2119 } },
2120 },
2121
2122 [EM2882_BOARD_EVGA_INDTUBE] = {
2123 .name = "Evga inDtube",
2124 .tuner_type = TUNER_XC2028,
2125 .tuner_gpio = default_tuner_gpio,
2126 .decoder = EM28XX_TVP5150,
2127 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, /* NEC IR */
2128 .mts_firmware = 1,
2129 .has_dvb = 1,
2130 .dvb_gpio = evga_indtube_digital,
2131 .ir_codes = RC_MAP_EVGA_INDTUBE,
2132 .input = { {
2133 .type = EM28XX_VMUX_TELEVISION,
2134 .vmux = TVP5150_COMPOSITE0,
2135 .amux = EM28XX_AMUX_VIDEO,
2136 .gpio = evga_indtube_analog,
2137 }, {
2138 .type = EM28XX_VMUX_COMPOSITE,
2139 .vmux = TVP5150_COMPOSITE1,
2140 .amux = EM28XX_AMUX_LINE_IN,
2141 .gpio = evga_indtube_analog,
2142 }, {
2143 .type = EM28XX_VMUX_SVIDEO,
2144 .vmux = TVP5150_SVIDEO,
2145 .amux = EM28XX_AMUX_LINE_IN,
2146 .gpio = evga_indtube_analog,
2147 } },
2148 },
2149 /* eb1a:2868 Empia EM2870 + Philips CU1216L NIM (Philips TDA10023 +
2150 Infineon TUA6034) */
2151 [EM2870_BOARD_REDDO_DVB_C_USB_BOX] = {
2152 .name = "Reddo DVB-C USB TV Box",
2153 .tuner_type = TUNER_ABSENT,
2154 .tuner_gpio = reddo_dvb_c_usb_box,
2155 .has_dvb = 1,
2156 },
2157 /* 1b80:a340 - Empia EM2870, NXP TDA18271HD and LG DT3304, sold
2158 * initially as the KWorld PlusTV 340U, then as the UB435-Q.
2159 * Early variants have a TDA18271HD/C1, later ones a TDA18271HD/C2 */
2160 [EM2870_BOARD_KWORLD_A340] = {
2161 .name = "KWorld PlusTV 340U or UB435-Q (ATSC)",
2162 .tuner_type = TUNER_ABSENT, /* Digital-only TDA18271HD */
2163 .has_dvb = 1,
2164 .dvb_gpio = kworld_a340_digital,
2165 .tuner_gpio = default_tuner_gpio,
2166 },
2167 /* 2013:024f PCTV nanoStick T2 290e.
2168 * Empia EM28174, Sony CXD2820R and NXP TDA18271HD/C2 */
2169 [EM28174_BOARD_PCTV_290E] = {
2170 .name = "PCTV nanoStick T2 290e",
2171 .def_i2c_bus = 1,
2172 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | EM28XX_I2C_FREQ_100_KHZ,
2173 .tuner_type = TUNER_ABSENT,
2174 .tuner_gpio = pctv_290e,
2175 .has_dvb = 1,
2176 .ir_codes = RC_MAP_PINNACLE_PCTV_HD,
2177 },
2178 /* 2013:024f PCTV DVB-S2 Stick 460e
2179 * Empia EM28174, NXP TDA10071, Conexant CX24118A and Allegro A8293 */
2180 [EM28174_BOARD_PCTV_460E] = {
2181 .def_i2c_bus = 1,
2182 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | EM28XX_I2C_FREQ_400_KHZ,
2183 .name = "PCTV DVB-S2 Stick (460e)",
2184 .tuner_type = TUNER_ABSENT,
2185 .tuner_gpio = pctv_460e,
2186 .has_dvb = 1,
2187 .ir_codes = RC_MAP_PINNACLE_PCTV_HD,
2188 },
2189 /* eb1a:5006 Honestech VIDBOX NW03
2190 * Empia EM2860, Philips SAA7113, Empia EMP202, No Tuner */
2191 [EM2860_BOARD_HT_VIDBOX_NW03] = {
2192 .name = "Honestech Vidbox NW03",
2193 .tuner_type = TUNER_ABSENT,
2194 .decoder = EM28XX_SAA711X,
2195 .input = { {
2196 .type = EM28XX_VMUX_COMPOSITE,
2197 .vmux = SAA7115_COMPOSITE0,
2198 .amux = EM28XX_AMUX_LINE_IN,
2199 }, {
2200 .type = EM28XX_VMUX_SVIDEO,
2201 .vmux = SAA7115_SVIDEO3, /* S-VIDEO needs confirming */
2202 .amux = EM28XX_AMUX_LINE_IN,
2203 } },
2204 },
2205 /* 1b80:e425 MaxMedia UB425-TC
2206 * Empia EM2874B + Micronas DRX 3913KA2 + NXP TDA18271HDC2 */
2207 [EM2874_BOARD_MAXMEDIA_UB425_TC] = {
2208 .name = "MaxMedia UB425-TC",
2209 .tuner_type = TUNER_ABSENT,
2210 .tuner_gpio = maxmedia_ub425_tc,
2211 .has_dvb = 1,
2212 .ir_codes = RC_MAP_REDDO,
2213 .def_i2c_bus = 1,
2214 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
2215 EM28XX_I2C_FREQ_400_KHZ,
2216 },
2217 /* 2304:0242 PCTV QuatroStick (510e)
2218 * Empia EM2884 + Micronas DRX 3926K + NXP TDA18271HDC2 */
2219 [EM2884_BOARD_PCTV_510E] = {
2220 .name = "PCTV QuatroStick (510e)",
2221 .tuner_type = TUNER_ABSENT,
2222 .tuner_gpio = pctv_510e,
2223 .has_dvb = 1,
2224 .ir_codes = RC_MAP_PINNACLE_PCTV_HD,
2225 .def_i2c_bus = 1,
2226 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
2227 EM28XX_I2C_FREQ_400_KHZ,
2228 },
2229 /* 2013:0251 PCTV QuatroStick nano (520e)
2230 * Empia EM2884 + Micronas DRX 3926K + NXP TDA18271HDC2 */
2231 [EM2884_BOARD_PCTV_520E] = {
2232 .name = "PCTV QuatroStick nano (520e)",
2233 .tuner_type = TUNER_ABSENT,
2234 .tuner_gpio = pctv_520e,
2235 .has_dvb = 1,
2236 .ir_codes = RC_MAP_PINNACLE_PCTV_HD,
2237 .def_i2c_bus = 1,
2238 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
2239 EM28XX_I2C_FREQ_400_KHZ,
2240 },
2241 [EM2884_BOARD_TERRATEC_HTC_USB_XS] = {
2242 .name = "Terratec Cinergy HTC USB XS",
2243 .has_dvb = 1,
2244 .ir_codes = RC_MAP_NEC_TERRATEC_CINERGY_XS,
2245 .tuner_type = TUNER_ABSENT,
2246 .def_i2c_bus = 1,
2247 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
2248 EM28XX_I2C_FREQ_400_KHZ,
2249 },
2250 /* 1b80:e1cc Delock 61959
2251 * Empia EM2874B + Micronas DRX 3913KA2 + NXP TDA18271HDC2
2252 * mostly the same as MaxMedia UB-425-TC but different remote */
2253 [EM2874_BOARD_DELOCK_61959] = {
2254 .name = "Delock 61959",
2255 .tuner_type = TUNER_ABSENT,
2256 .tuner_gpio = maxmedia_ub425_tc,
2257 .has_dvb = 1,
2258 .ir_codes = RC_MAP_DELOCK_61959,
2259 .def_i2c_bus = 1,
2260 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
2261 EM28XX_I2C_FREQ_400_KHZ,
2262 },
2263 /*
2264 * 1b80:e346 KWorld USB ATSC TV Stick UB435-Q V2
2265 * Empia EM2874B + LG DT3305 + NXP TDA18271HDC2
2266 */
2267 [EM2874_BOARD_KWORLD_UB435Q_V2] = {
2268 .name = "KWorld USB ATSC TV Stick UB435-Q V2",
2269 .tuner_type = TUNER_ABSENT,
2270 .has_dvb = 1,
2271 .dvb_gpio = kworld_a340_digital,
2272 .tuner_gpio = default_tuner_gpio,
2273 .def_i2c_bus = 1,
2274 },
2275 /*
2276 * 1b80:e34c KWorld USB ATSC TV Stick UB435-Q V3
2277 * Empia EM2874B + LG DT3305 + NXP TDA18271HDC2
2278 */
2279 [EM2874_BOARD_KWORLD_UB435Q_V3] = {
2280 .name = "KWorld USB ATSC TV Stick UB435-Q V3",
2281 .tuner_type = TUNER_ABSENT,
2282 .has_dvb = 1,
2283 .tuner_gpio = kworld_ub435q_v3_digital,
2284 .def_i2c_bus = 1,
2285 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
2286 EM28XX_I2C_FREQ_100_KHZ,
2287 .leds = kworld_ub435q_v3_leds,
2288 },
2289 [EM2874_BOARD_PCTV_HD_MINI_80E] = {
2290 .name = "Pinnacle PCTV HD Mini",
2291 .tuner_type = TUNER_ABSENT,
2292 .has_dvb = 1,
2293 .dvb_gpio = em2874_pctv_80e_digital,
2294 .decoder = EM28XX_NODECODER,
2295 .ir_codes = RC_MAP_PINNACLE_PCTV_HD,
2296 .leds = pctv_80e_leds,
2297 },
2298 /* 1ae7:9003/9004 SpeedLink Vicious And Devine Laplace webcam
2299 * Empia EM2765 + OmniVision OV2640 */
2300 [EM2765_BOARD_SPEEDLINK_VAD_LAPLACE] = {
2301 .name = "SpeedLink Vicious And Devine Laplace webcam",
2302 .xclk = EM28XX_XCLK_FREQUENCY_24MHZ,
2303 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
2304 EM28XX_I2C_FREQ_100_KHZ,
2305 .def_i2c_bus = 1,
2306 .tuner_type = TUNER_ABSENT,
2307 .is_webcam = 1,
2308 .input = { {
2309 .type = EM28XX_VMUX_COMPOSITE,
2310 .amux = EM28XX_AMUX_VIDEO,
2311 .gpio = speedlink_vad_laplace_reg_seq,
2312 } },
2313 .buttons = speedlink_vad_laplace_buttons,
2314 .leds = speedlink_vad_laplace_leds,
2315 },
2316 /* 2013:0258 PCTV DVB-S2 Stick (461e)
2317 * Empia EM28178, Montage M88DS3103, Montage M88TS2022, Allegro A8293 */
2318 [EM28178_BOARD_PCTV_461E] = {
2319 .def_i2c_bus = 1,
2320 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | EM28XX_I2C_FREQ_400_KHZ,
2321 .name = "PCTV DVB-S2 Stick (461e)",
2322 .tuner_type = TUNER_ABSENT,
2323 .tuner_gpio = pctv_461e,
2324 .has_dvb = 1,
2325 .ir_codes = RC_MAP_PINNACLE_PCTV_HD,
2326 },
2327 /* 2013:025f PCTV tripleStick (292e).
2328 * Empia EM28178, Silicon Labs Si2168, Silicon Labs Si2157 */
2329 [EM28178_BOARD_PCTV_292E] = {
2330 .name = "PCTV tripleStick (292e)",
2331 .def_i2c_bus = 1,
2332 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | EM28XX_I2C_FREQ_400_KHZ,
2333 .tuner_type = TUNER_ABSENT,
2334 .tuner_gpio = pctv_292e,
2335 .has_dvb = 1,
2336 .ir_codes = RC_MAP_PINNACLE_PCTV_HD,
2337 },
2338 [EM2861_BOARD_LEADTEK_VC100] = {
2339 .name = "Leadtek VC100",
2340 .tuner_type = TUNER_ABSENT, /* Capture only device */
2341 .decoder = EM28XX_TVP5150,
2342 .input = { {
2343 .type = EM28XX_VMUX_COMPOSITE,
2344 .vmux = TVP5150_COMPOSITE1,
2345 .amux = EM28XX_AMUX_LINE_IN,
2346 }, {
2347 .type = EM28XX_VMUX_SVIDEO,
2348 .vmux = TVP5150_SVIDEO,
2349 .amux = EM28XX_AMUX_LINE_IN,
2350 } },
2351 },
2352 /* eb1a:8179 Terratec Cinergy T2 Stick HD.
2353 * Empia EM28178, Silicon Labs Si2168, Silicon Labs Si2146 */
2354 [EM28178_BOARD_TERRATEC_T2_STICK_HD] = {
2355 .name = "Terratec Cinergy T2 Stick HD",
2356 .def_i2c_bus = 1,
2357 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | EM28XX_I2C_FREQ_400_KHZ,
2358 .tuner_type = TUNER_ABSENT,
2359 .tuner_gpio = terratec_t2_stick_hd,
2360 .has_dvb = 1,
2361 .ir_codes = RC_MAP_TERRATEC_SLIM_2,
2362 },
2363
2364 /*
2365 * 3275:0085 PLEX PX-BCUD.
2366 * Empia EM28178, TOSHIBA TC90532XBG, Sharp QM1D1C0042
2367 */
2368 [EM28178_BOARD_PLEX_PX_BCUD] = {
2369 .name = "PLEX PX-BCUD",
2370 .xclk = EM28XX_XCLK_FREQUENCY_4_3MHZ,
2371 .def_i2c_bus = 1,
2372 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE,
2373 .tuner_type = TUNER_ABSENT,
2374 .tuner_gpio = plex_px_bcud,
2375 .has_dvb = 1,
2376 },
2377 /*
2378 * 2040:0265 Hauppauge WinTV-dualHD (DVB version).
2379 * Empia EM28274, 2x Silicon Labs Si2168, 2x Silicon Labs Si2157
2380 */
2381 [EM28174_BOARD_HAUPPAUGE_WINTV_DUALHD_DVB] = {
2382 .name = "Hauppauge WinTV-dualHD DVB",
2383 .def_i2c_bus = 1,
2384 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
2385 EM28XX_I2C_FREQ_400_KHZ,
2386 .tuner_type = TUNER_ABSENT,
2387 .tuner_gpio = hauppauge_dualhd_dvb,
2388 .has_dvb = 1,
2389 .ir_codes = RC_MAP_HAUPPAUGE,
2390 .leds = hauppauge_dualhd_leds,
2391 },
2392 };
2393 EXPORT_SYMBOL_GPL(em28xx_boards);
2394
2395 static const unsigned int em28xx_bcount = ARRAY_SIZE(em28xx_boards);
2396
2397 /* table of devices that work with this driver */
2398 struct usb_device_id em28xx_id_table[] = {
2399 { USB_DEVICE(0xeb1a, 0x2750),
2400 .driver_info = EM2750_BOARD_UNKNOWN },
2401 { USB_DEVICE(0xeb1a, 0x2751),
2402 .driver_info = EM2750_BOARD_UNKNOWN },
2403 { USB_DEVICE(0xeb1a, 0x2800),
2404 .driver_info = EM2800_BOARD_UNKNOWN },
2405 { USB_DEVICE(0xeb1a, 0x2710),
2406 .driver_info = EM2820_BOARD_UNKNOWN },
2407 { USB_DEVICE(0xeb1a, 0x2820),
2408 .driver_info = EM2820_BOARD_UNKNOWN },
2409 { USB_DEVICE(0xeb1a, 0x2821),
2410 .driver_info = EM2820_BOARD_UNKNOWN },
2411 { USB_DEVICE(0xeb1a, 0x2860),
2412 .driver_info = EM2820_BOARD_UNKNOWN },
2413 { USB_DEVICE(0xeb1a, 0x2861),
2414 .driver_info = EM2820_BOARD_UNKNOWN },
2415 { USB_DEVICE(0xeb1a, 0x2862),
2416 .driver_info = EM2820_BOARD_UNKNOWN },
2417 { USB_DEVICE(0xeb1a, 0x2863),
2418 .driver_info = EM2820_BOARD_UNKNOWN },
2419 { USB_DEVICE(0xeb1a, 0x2870),
2420 .driver_info = EM2820_BOARD_UNKNOWN },
2421 { USB_DEVICE(0xeb1a, 0x2881),
2422 .driver_info = EM2820_BOARD_UNKNOWN },
2423 { USB_DEVICE(0xeb1a, 0x2883),
2424 .driver_info = EM2820_BOARD_UNKNOWN },
2425 { USB_DEVICE(0xeb1a, 0x2868),
2426 .driver_info = EM2820_BOARD_UNKNOWN },
2427 { USB_DEVICE(0xeb1a, 0x2875),
2428 .driver_info = EM2820_BOARD_UNKNOWN },
2429 { USB_DEVICE(0xeb1a, 0x2885), /* MSI Digivox Trio */
2430 .driver_info = EM2884_BOARD_TERRATEC_H5 },
2431 { USB_DEVICE(0xeb1a, 0xe300),
2432 .driver_info = EM2861_BOARD_KWORLD_PVRTV_300U },
2433 { USB_DEVICE(0xeb1a, 0xe303),
2434 .driver_info = EM2860_BOARD_KAIOMY_TVNPC_U2 },
2435 { USB_DEVICE(0xeb1a, 0xe305),
2436 .driver_info = EM2880_BOARD_KWORLD_DVB_305U },
2437 { USB_DEVICE(0xeb1a, 0xe310),
2438 .driver_info = EM2880_BOARD_MSI_DIGIVOX_AD },
2439 { USB_DEVICE(0xeb1a, 0xa313),
2440 .driver_info = EM2882_BOARD_KWORLD_ATSC_315U },
2441 { USB_DEVICE(0xeb1a, 0xa316),
2442 .driver_info = EM2883_BOARD_KWORLD_HYBRID_330U },
2443 { USB_DEVICE(0xeb1a, 0xe320),
2444 .driver_info = EM2880_BOARD_MSI_DIGIVOX_AD_II },
2445 { USB_DEVICE(0xeb1a, 0xe323),
2446 .driver_info = EM2882_BOARD_KWORLD_VS_DVBT },
2447 { USB_DEVICE(0xeb1a, 0xe350),
2448 .driver_info = EM2870_BOARD_KWORLD_350U },
2449 { USB_DEVICE(0xeb1a, 0xe355),
2450 .driver_info = EM2870_BOARD_KWORLD_355U },
2451 { USB_DEVICE(0xeb1a, 0x2801),
2452 .driver_info = EM2800_BOARD_GRABBEEX_USB2800 },
2453 { USB_DEVICE(0xeb1a, 0xe357),
2454 .driver_info = EM2870_BOARD_KWORLD_355U },
2455 { USB_DEVICE(0xeb1a, 0xe359),
2456 .driver_info = EM2870_BOARD_KWORLD_355U },
2457 { USB_DEVICE(0x1b80, 0xe302),
2458 .driver_info = EM2820_BOARD_PINNACLE_DVC_90 }, /* Kaiser Baas Video to DVD maker */
2459 { USB_DEVICE(0x1b80, 0xe304),
2460 .driver_info = EM2820_BOARD_PINNACLE_DVC_90 }, /* Kworld DVD Maker 2 */
2461 { USB_DEVICE(0x0ccd, 0x0036),
2462 .driver_info = EM2820_BOARD_TERRATEC_CINERGY_250 },
2463 { USB_DEVICE(0x0ccd, 0x004c),
2464 .driver_info = EM2880_BOARD_TERRATEC_HYBRID_XS_FR },
2465 { USB_DEVICE(0x0ccd, 0x004f),
2466 .driver_info = EM2860_BOARD_TERRATEC_HYBRID_XS },
2467 { USB_DEVICE(0x0ccd, 0x005e),
2468 .driver_info = EM2882_BOARD_TERRATEC_HYBRID_XS },
2469 { USB_DEVICE(0x0ccd, 0x0042),
2470 .driver_info = EM2882_BOARD_TERRATEC_HYBRID_XS },
2471 { USB_DEVICE(0x0ccd, 0x0043),
2472 .driver_info = EM2870_BOARD_TERRATEC_XS_MT2060 },
2473 { USB_DEVICE(0x0ccd, 0x008e), /* Cinergy HTC USB XS Rev. 1 */
2474 .driver_info = EM2884_BOARD_TERRATEC_HTC_USB_XS },
2475 { USB_DEVICE(0x0ccd, 0x00ac), /* Cinergy HTC USB XS Rev. 2 */
2476 .driver_info = EM2884_BOARD_TERRATEC_HTC_USB_XS },
2477 { USB_DEVICE(0x0ccd, 0x10a2), /* H5 Rev. 1 */
2478 .driver_info = EM2884_BOARD_TERRATEC_H5 },
2479 { USB_DEVICE(0x0ccd, 0x10ad), /* H5 Rev. 2 */
2480 .driver_info = EM2884_BOARD_TERRATEC_H5 },
2481 { USB_DEVICE(0x0ccd, 0x10b6), /* H5 Rev. 3 */
2482 .driver_info = EM2884_BOARD_TERRATEC_H5 },
2483 { USB_DEVICE(0x0ccd, 0x0084),
2484 .driver_info = EM2860_BOARD_TERRATEC_AV350 },
2485 { USB_DEVICE(0x0ccd, 0x0096),
2486 .driver_info = EM2860_BOARD_TERRATEC_GRABBY },
2487 { USB_DEVICE(0x0ccd, 0x10AF),
2488 .driver_info = EM2860_BOARD_TERRATEC_GRABBY },
2489 { USB_DEVICE(0x0ccd, 0x00b2),
2490 .driver_info = EM2884_BOARD_CINERGY_HTC_STICK },
2491 { USB_DEVICE(0x0fd9, 0x0018),
2492 .driver_info = EM2884_BOARD_ELGATO_EYETV_HYBRID_2008 },
2493 { USB_DEVICE(0x0fd9, 0x0033),
2494 .driver_info = EM2860_BOARD_ELGATO_VIDEO_CAPTURE },
2495 { USB_DEVICE(0x185b, 0x2870),
2496 .driver_info = EM2870_BOARD_COMPRO_VIDEOMATE },
2497 { USB_DEVICE(0x185b, 0x2041),
2498 .driver_info = EM2820_BOARD_COMPRO_VIDEOMATE_FORYOU },
2499 { USB_DEVICE(0x2040, 0x4200),
2500 .driver_info = EM2820_BOARD_HAUPPAUGE_WINTV_USB_2 },
2501 { USB_DEVICE(0x2040, 0x4201),
2502 .driver_info = EM2820_BOARD_HAUPPAUGE_WINTV_USB_2 },
2503 { USB_DEVICE(0x2040, 0x6500),
2504 .driver_info = EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900 },
2505 { USB_DEVICE(0x2040, 0x6502),
2506 .driver_info = EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2 },
2507 { USB_DEVICE(0x2040, 0x6513), /* HCW HVR-980 */
2508 .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950 },
2509 { USB_DEVICE(0x2040, 0x6517), /* HP HVR-950 */
2510 .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950 },
2511 { USB_DEVICE(0x2040, 0x651b), /* RP HVR-950 */
2512 .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950 },
2513 { USB_DEVICE(0x2040, 0x651f),
2514 .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850 },
2515 { USB_DEVICE(0x2040, 0x0265),
2516 .driver_info = EM28174_BOARD_HAUPPAUGE_WINTV_DUALHD_DVB },
2517 { USB_DEVICE(0x0438, 0xb002),
2518 .driver_info = EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600 },
2519 { USB_DEVICE(0x2001, 0xf112),
2520 .driver_info = EM2820_BOARD_DLINK_USB_TV },
2521 { USB_DEVICE(0x2304, 0x0207),
2522 .driver_info = EM2820_BOARD_PINNACLE_DVC_90 },
2523 { USB_DEVICE(0x2304, 0x0208),
2524 .driver_info = EM2820_BOARD_PINNACLE_USB_2 },
2525 { USB_DEVICE(0x2304, 0x021a),
2526 .driver_info = EM2820_BOARD_PINNACLE_DVC_90 },
2527 { USB_DEVICE(0x2304, 0x0226),
2528 .driver_info = EM2882_BOARD_PINNACLE_HYBRID_PRO_330E },
2529 { USB_DEVICE(0x2304, 0x0227),
2530 .driver_info = EM2880_BOARD_PINNACLE_PCTV_HD_PRO },
2531 { USB_DEVICE(0x2304, 0x023f),
2532 .driver_info = EM2874_BOARD_PCTV_HD_MINI_80E },
2533 { USB_DEVICE(0x0413, 0x6023),
2534 .driver_info = EM2800_BOARD_LEADTEK_WINFAST_USBII },
2535 { USB_DEVICE(0x093b, 0xa003),
2536 .driver_info = EM2820_BOARD_PINNACLE_DVC_90 },
2537 { USB_DEVICE(0x093b, 0xa005),
2538 .driver_info = EM2861_BOARD_PLEXTOR_PX_TV100U },
2539 { USB_DEVICE(0x04bb, 0x0515),
2540 .driver_info = EM2820_BOARD_IODATA_GVMVP_SZ },
2541 { USB_DEVICE(0xeb1a, 0x50a6),
2542 .driver_info = EM2860_BOARD_GADMEI_UTV330 },
2543 { USB_DEVICE(0x1b80, 0xa340),
2544 .driver_info = EM2870_BOARD_KWORLD_A340 },
2545 { USB_DEVICE(0x1b80, 0xe346),
2546 .driver_info = EM2874_BOARD_KWORLD_UB435Q_V2 },
2547 { USB_DEVICE(0x1b80, 0xe34c),
2548 .driver_info = EM2874_BOARD_KWORLD_UB435Q_V3 },
2549 { USB_DEVICE(0x2013, 0x024f),
2550 .driver_info = EM28174_BOARD_PCTV_290E },
2551 { USB_DEVICE(0x2013, 0x024c),
2552 .driver_info = EM28174_BOARD_PCTV_460E },
2553 { USB_DEVICE(0x2040, 0x1605),
2554 .driver_info = EM2884_BOARD_HAUPPAUGE_WINTV_HVR_930C },
2555 { USB_DEVICE(0x1b80, 0xe755),
2556 .driver_info = EM2884_BOARD_C3TECH_DIGITAL_DUO },
2557 { USB_DEVICE(0xeb1a, 0x5006),
2558 .driver_info = EM2860_BOARD_HT_VIDBOX_NW03 },
2559 { USB_DEVICE(0x1b80, 0xe309), /* Sveon STV40 */
2560 .driver_info = EM2860_BOARD_EASYCAP },
2561 { USB_DEVICE(0x1b80, 0xe425),
2562 .driver_info = EM2874_BOARD_MAXMEDIA_UB425_TC },
2563 { USB_DEVICE(0x2304, 0x0242),
2564 .driver_info = EM2884_BOARD_PCTV_510E },
2565 { USB_DEVICE(0x2013, 0x0251),
2566 .driver_info = EM2884_BOARD_PCTV_520E },
2567 { USB_DEVICE(0x1b80, 0xe1cc),
2568 .driver_info = EM2874_BOARD_DELOCK_61959 },
2569 { USB_DEVICE(0x1ae7, 0x9003),
2570 .driver_info = EM2765_BOARD_SPEEDLINK_VAD_LAPLACE },
2571 { USB_DEVICE(0x1ae7, 0x9004),
2572 .driver_info = EM2765_BOARD_SPEEDLINK_VAD_LAPLACE },
2573 { USB_DEVICE(0x2013, 0x0258),
2574 .driver_info = EM28178_BOARD_PCTV_461E },
2575 { USB_DEVICE(0x2013, 0x025f),
2576 .driver_info = EM28178_BOARD_PCTV_292E },
2577 { USB_DEVICE(0x2040, 0x0264), /* Hauppauge WinTV-soloHD */
2578 .driver_info = EM28178_BOARD_PCTV_292E },
2579 { USB_DEVICE(0x0413, 0x6f07),
2580 .driver_info = EM2861_BOARD_LEADTEK_VC100 },
2581 { USB_DEVICE(0xeb1a, 0x8179),
2582 .driver_info = EM28178_BOARD_TERRATEC_T2_STICK_HD },
2583 { USB_DEVICE(0x3275, 0x0085),
2584 .driver_info = EM28178_BOARD_PLEX_PX_BCUD },
2585 { },
2586 };
2587 MODULE_DEVICE_TABLE(usb, em28xx_id_table);
2588
2589 /*
2590 * EEPROM hash table for devices with generic USB IDs
2591 */
2592 static struct em28xx_hash_table em28xx_eeprom_hash[] = {
2593 /* P/N: SA 60002070465 Tuner: TVF7533-MF */
2594 {0x6ce05a8f, EM2820_BOARD_PROLINK_PLAYTV_USB2, TUNER_YMEC_TVF_5533MF},
2595 {0x72cc5a8b, EM2820_BOARD_PROLINK_PLAYTV_BOX4_USB2, TUNER_YMEC_TVF_5533MF},
2596 {0x966a0441, EM2880_BOARD_KWORLD_DVB_310U, TUNER_XC2028},
2597 {0x166a0441, EM2880_BOARD_EMPIRE_DUAL_TV, TUNER_XC2028},
2598 {0xcee44a99, EM2882_BOARD_EVGA_INDTUBE, TUNER_XC2028},
2599 {0xb8846b20, EM2881_BOARD_PINNACLE_HYBRID_PRO, TUNER_XC2028},
2600 {0x63f653bd, EM2870_BOARD_REDDO_DVB_C_USB_BOX, TUNER_ABSENT},
2601 {0x4e913442, EM2882_BOARD_DIKOM_DK300, TUNER_XC2028},
2602 };
2603
2604 /* I2C devicelist hash table for devices with generic USB IDs */
2605 static struct em28xx_hash_table em28xx_i2c_hash[] = {
2606 {0xb06a32c3, EM2800_BOARD_TERRATEC_CINERGY_200, TUNER_LG_PAL_NEW_TAPC},
2607 {0xf51200e3, EM2800_BOARD_VGEAR_POCKETTV, TUNER_LG_PAL_NEW_TAPC},
2608 {0x1ba50080, EM2860_BOARD_SAA711X_REFERENCE_DESIGN, TUNER_ABSENT},
2609 {0x77800080, EM2860_BOARD_TVP5150_REFERENCE_DESIGN, TUNER_ABSENT},
2610 {0xc51200e3, EM2820_BOARD_GADMEI_TVR200, TUNER_LG_PAL_NEW_TAPC},
2611 {0x4ba50080, EM2861_BOARD_GADMEI_UTV330PLUS, TUNER_TNF_5335MF},
2612 {0x6b800080, EM2874_BOARD_LEADERSHIP_ISDBT, TUNER_ABSENT},
2613 };
2614
2615 /* NOTE: introduce a separate hash table for devices with 16 bit eeproms */
2616
2617 int em28xx_tuner_callback(void *ptr, int component, int command, int arg)
2618 {
2619 struct em28xx_i2c_bus *i2c_bus = ptr;
2620 struct em28xx *dev = i2c_bus->dev;
2621 int rc = 0;
2622
2623 if (dev->tuner_type != TUNER_XC2028 && dev->tuner_type != TUNER_XC5000)
2624 return 0;
2625
2626 if (command != XC2028_TUNER_RESET && command != XC5000_TUNER_RESET)
2627 return 0;
2628
2629 rc = em28xx_gpio_set(dev, dev->board.tuner_gpio);
2630
2631 return rc;
2632 }
2633 EXPORT_SYMBOL_GPL(em28xx_tuner_callback);
2634
2635 static inline void em28xx_set_model(struct em28xx *dev)
2636 {
2637 dev->board = em28xx_boards[dev->model];
2638
2639 /* Those are the default values for the majority of boards
2640 Use those values if not specified otherwise at boards entry
2641 */
2642 if (!dev->board.xclk)
2643 dev->board.xclk = EM28XX_XCLK_IR_RC5_MODE |
2644 EM28XX_XCLK_FREQUENCY_12MHZ;
2645
2646 if (!dev->board.i2c_speed)
2647 dev->board.i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
2648 EM28XX_I2C_FREQ_100_KHZ;
2649
2650 /* Should be initialized early, for I2C to work */
2651 dev->def_i2c_bus = dev->board.def_i2c_bus;
2652 }
2653
2654 /* Wait until AC97_RESET reports the expected value reliably before proceeding.
2655 * We also check that two unrelated registers accesses don't return the same
2656 * value to avoid premature return.
2657 * This procedure helps ensuring AC97 register accesses are reliable.
2658 */
2659 static int em28xx_wait_until_ac97_features_equals(struct em28xx *dev,
2660 int expected_feat)
2661 {
2662 unsigned long timeout = jiffies + msecs_to_jiffies(2000);
2663 int feat, powerdown;
2664
2665 while (time_is_after_jiffies(timeout)) {
2666 feat = em28xx_read_ac97(dev, AC97_RESET);
2667 if (feat < 0)
2668 return feat;
2669
2670 powerdown = em28xx_read_ac97(dev, AC97_POWERDOWN);
2671 if (powerdown < 0)
2672 return powerdown;
2673
2674 if (feat == expected_feat && feat != powerdown)
2675 return 0;
2676
2677 msleep(50);
2678 }
2679
2680 em28xx_warn("AC97 registers access is not reliable !\n");
2681 return -ETIMEDOUT;
2682 }
2683
2684 /* Since em28xx_pre_card_setup() requires a proper dev->model,
2685 * this won't work for boards with generic PCI IDs
2686 */
2687 static void em28xx_pre_card_setup(struct em28xx *dev)
2688 {
2689 /* Set the initial XCLK and I2C clock values based on the board
2690 definition */
2691 em28xx_write_reg(dev, EM28XX_R0F_XCLK, dev->board.xclk & 0x7f);
2692 if (!dev->board.is_em2800)
2693 em28xx_write_reg(dev, EM28XX_R06_I2C_CLK, dev->board.i2c_speed);
2694 msleep(50);
2695
2696 /* request some modules */
2697 switch (dev->model) {
2698 case EM2861_BOARD_PLEXTOR_PX_TV100U:
2699 /* Sets the msp34xx I2S speed */
2700 dev->i2s_speed = 2048000;
2701 break;
2702 case EM2861_BOARD_KWORLD_PVRTV_300U:
2703 case EM2880_BOARD_KWORLD_DVB_305U:
2704 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0x6d);
2705 msleep(10);
2706 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0x7d);
2707 msleep(10);
2708 break;
2709 case EM2870_BOARD_COMPRO_VIDEOMATE:
2710 /* TODO: someone can do some cleanup here...
2711 not everything's needed */
2712 em28xx_write_reg(dev, EM2880_R04_GPO, 0x00);
2713 msleep(10);
2714 em28xx_write_reg(dev, EM2880_R04_GPO, 0x01);
2715 msleep(10);
2716 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfd);
2717 mdelay(70);
2718 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfc);
2719 mdelay(70);
2720 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xdc);
2721 mdelay(70);
2722 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfc);
2723 mdelay(70);
2724 break;
2725 case EM2870_BOARD_TERRATEC_XS_MT2060:
2726 /* this device needs some gpio writes to get the DVB-T
2727 demod work */
2728 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfe);
2729 mdelay(70);
2730 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xde);
2731 mdelay(70);
2732 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfe);
2733 mdelay(70);
2734 break;
2735 case EM2870_BOARD_PINNACLE_PCTV_DVB:
2736 /* this device needs some gpio writes to get the
2737 DVB-T demod work */
2738 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfe);
2739 mdelay(70);
2740 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xde);
2741 mdelay(70);
2742 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfe);
2743 mdelay(70);
2744 break;
2745 case EM2820_BOARD_GADMEI_UTV310:
2746 case EM2820_BOARD_MSI_VOX_USB_2:
2747 /* enables audio for that devices */
2748 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfd);
2749 break;
2750
2751 case EM2882_BOARD_KWORLD_ATSC_315U:
2752 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xff);
2753 msleep(10);
2754 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfe);
2755 msleep(10);
2756 em28xx_write_reg(dev, EM2880_R04_GPO, 0x00);
2757 msleep(10);
2758 em28xx_write_reg(dev, EM2880_R04_GPO, 0x08);
2759 msleep(10);
2760 break;
2761
2762 case EM2860_BOARD_KAIOMY_TVNPC_U2:
2763 em28xx_write_regs(dev, EM28XX_R0F_XCLK, "\x07", 1);
2764 em28xx_write_regs(dev, EM28XX_R06_I2C_CLK, "\x40", 1);
2765 em28xx_write_regs(dev, 0x0d, "\x42", 1);
2766 em28xx_write_regs(dev, 0x08, "\xfd", 1);
2767 msleep(10);
2768 em28xx_write_regs(dev, 0x08, "\xff", 1);
2769 msleep(10);
2770 em28xx_write_regs(dev, 0x08, "\x7f", 1);
2771 msleep(10);
2772 em28xx_write_regs(dev, 0x08, "\x6b", 1);
2773
2774 break;
2775 case EM2860_BOARD_EASYCAP:
2776 em28xx_write_regs(dev, 0x08, "\xf8", 1);
2777 break;
2778
2779 case EM2820_BOARD_IODATA_GVMVP_SZ:
2780 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xff);
2781 msleep(70);
2782 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xf7);
2783 msleep(10);
2784 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfe);
2785 msleep(70);
2786 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfd);
2787 msleep(70);
2788 break;
2789
2790 case EM2860_BOARD_TERRATEC_GRABBY:
2791 /* HACK?: Ensure AC97 register reading is reliable before
2792 * proceeding. In practice, this will wait about 1.6 seconds.
2793 */
2794 em28xx_wait_until_ac97_features_equals(dev, 0x6a90);
2795 break;
2796 }
2797
2798 em28xx_gpio_set(dev, dev->board.tuner_gpio);
2799 em28xx_set_mode(dev, EM28XX_ANALOG_MODE);
2800
2801 /* Unlock device */
2802 em28xx_set_mode(dev, EM28XX_SUSPEND);
2803 }
2804
2805 static int em28xx_hint_board(struct em28xx *dev)
2806 {
2807 int i;
2808
2809 if (dev->board.is_webcam) {
2810 if (dev->em28xx_sensor == EM28XX_MT9V011) {
2811 dev->model = EM2820_BOARD_SILVERCREST_WEBCAM;
2812 } else if (dev->em28xx_sensor == EM28XX_MT9M001 ||
2813 dev->em28xx_sensor == EM28XX_MT9M111) {
2814 dev->model = EM2750_BOARD_UNKNOWN;
2815 }
2816 /* FIXME: IMPROVE ! */
2817
2818 return 0;
2819 }
2820
2821 /* HINT method: EEPROM
2822 *
2823 * This method works only for boards with eeprom.
2824 * Uses a hash of all eeprom bytes. The hash should be
2825 * unique for a vendor/tuner pair.
2826 * There are a high chance that tuners for different
2827 * video standards produce different hashes.
2828 */
2829 for (i = 0; i < ARRAY_SIZE(em28xx_eeprom_hash); i++) {
2830 if (dev->hash == em28xx_eeprom_hash[i].hash) {
2831 dev->model = em28xx_eeprom_hash[i].model;
2832 dev->tuner_type = em28xx_eeprom_hash[i].tuner;
2833
2834 em28xx_errdev("Your board has no unique USB ID.\n");
2835 em28xx_errdev("A hint were successfully done, "
2836 "based on eeprom hash.\n");
2837 em28xx_errdev("This method is not 100%% failproof.\n");
2838 em28xx_errdev("If the board were missdetected, "
2839 "please email this log to:\n");
2840 em28xx_errdev("\tV4L Mailing List "
2841 " <linux-media@vger.kernel.org>\n");
2842 em28xx_errdev("Board detected as %s\n",
2843 em28xx_boards[dev->model].name);
2844
2845 return 0;
2846 }
2847 }
2848
2849 /* HINT method: I2C attached devices
2850 *
2851 * This method works for all boards.
2852 * Uses a hash of i2c scanned devices.
2853 * Devices with the same i2c attached chips will
2854 * be considered equal.
2855 * This method is less precise than the eeprom one.
2856 */
2857
2858 /* user did not request i2c scanning => do it now */
2859 if (!dev->i2c_hash)
2860 em28xx_do_i2c_scan(dev, dev->def_i2c_bus);
2861
2862 for (i = 0; i < ARRAY_SIZE(em28xx_i2c_hash); i++) {
2863 if (dev->i2c_hash == em28xx_i2c_hash[i].hash) {
2864 dev->model = em28xx_i2c_hash[i].model;
2865 dev->tuner_type = em28xx_i2c_hash[i].tuner;
2866 em28xx_errdev("Your board has no unique USB ID.\n");
2867 em28xx_errdev("A hint were successfully done, "
2868 "based on i2c devicelist hash.\n");
2869 em28xx_errdev("This method is not 100%% failproof.\n");
2870 em28xx_errdev("If the board were missdetected, "
2871 "please email this log to:\n");
2872 em28xx_errdev("\tV4L Mailing List "
2873 " <linux-media@vger.kernel.org>\n");
2874 em28xx_errdev("Board detected as %s\n",
2875 em28xx_boards[dev->model].name);
2876
2877 return 0;
2878 }
2879 }
2880
2881 em28xx_errdev("Your board has no unique USB ID and thus need a "
2882 "hint to be detected.\n");
2883 em28xx_errdev("You may try to use card=<n> insmod option to "
2884 "workaround that.\n");
2885 em28xx_errdev("Please send an email with this log to:\n");
2886 em28xx_errdev("\tV4L Mailing List <linux-media@vger.kernel.org>\n");
2887 em28xx_errdev("Board eeprom hash is 0x%08lx\n", dev->hash);
2888 em28xx_errdev("Board i2c devicelist hash is 0x%08lx\n", dev->i2c_hash);
2889
2890 em28xx_errdev("Here is a list of valid choices for the card=<n>"
2891 " insmod option:\n");
2892 for (i = 0; i < em28xx_bcount; i++) {
2893 em28xx_errdev(" card=%d -> %s\n",
2894 i, em28xx_boards[i].name);
2895 }
2896 return -1;
2897 }
2898
2899 static void em28xx_card_setup(struct em28xx *dev)
2900 {
2901 /*
2902 * If the device can be a webcam, seek for a sensor.
2903 * If sensor is not found, then it isn't a webcam.
2904 */
2905 if (dev->board.is_webcam) {
2906 if (em28xx_detect_sensor(dev) < 0)
2907 dev->board.is_webcam = 0;
2908 }
2909
2910 switch (dev->model) {
2911 case EM2750_BOARD_UNKNOWN:
2912 case EM2820_BOARD_UNKNOWN:
2913 case EM2800_BOARD_UNKNOWN:
2914 /*
2915 * The K-WORLD DVB-T 310U is detected as an MSI Digivox AD.
2916 *
2917 * This occurs because they share identical USB vendor and
2918 * product IDs.
2919 *
2920 * What we do here is look up the EEPROM hash of the K-WORLD
2921 * and if it is found then we decide that we do not have
2922 * a DIGIVOX and reset the device to the K-WORLD instead.
2923 *
2924 * This solution is only valid if they do not share eeprom
2925 * hash identities which has not been determined as yet.
2926 */
2927 if (em28xx_hint_board(dev) < 0)
2928 em28xx_errdev("Board not discovered\n");
2929 else {
2930 em28xx_set_model(dev);
2931 em28xx_pre_card_setup(dev);
2932 }
2933 break;
2934 default:
2935 em28xx_set_model(dev);
2936 }
2937
2938 em28xx_info("Identified as %s (card=%d)\n",
2939 dev->board.name, dev->model);
2940
2941 dev->tuner_type = em28xx_boards[dev->model].tuner_type;
2942
2943 /* request some modules */
2944 switch (dev->model) {
2945 case EM2820_BOARD_HAUPPAUGE_WINTV_USB_2:
2946 case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900:
2947 case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2:
2948 case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850:
2949 case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950:
2950 case EM2884_BOARD_HAUPPAUGE_WINTV_HVR_930C:
2951 case EM28174_BOARD_HAUPPAUGE_WINTV_DUALHD_DVB:
2952 {
2953 struct tveeprom tv;
2954
2955 if (dev->eedata == NULL)
2956 break;
2957 #if defined(CONFIG_MODULES) && defined(MODULE)
2958 request_module("tveeprom");
2959 #endif
2960 /* Call first TVeeprom */
2961
2962 dev->i2c_client[dev->def_i2c_bus].addr = 0xa0 >> 1;
2963 tveeprom_hauppauge_analog(&dev->i2c_client[dev->def_i2c_bus], &tv, dev->eedata);
2964
2965 dev->tuner_type = tv.tuner_type;
2966
2967 if (tv.audio_processor == TVEEPROM_AUDPROC_MSP) {
2968 dev->i2s_speed = 2048000;
2969 dev->board.has_msp34xx = 1;
2970 }
2971 break;
2972 }
2973 case EM2882_BOARD_KWORLD_ATSC_315U:
2974 em28xx_write_reg(dev, 0x0d, 0x42);
2975 msleep(10);
2976 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfd);
2977 msleep(10);
2978 break;
2979 case EM2820_BOARD_KWORLD_PVRTV2800RF:
2980 /* GPIO enables sound on KWORLD PVR TV 2800RF */
2981 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xf9);
2982 break;
2983 case EM2820_BOARD_UNKNOWN:
2984 case EM2800_BOARD_UNKNOWN:
2985 /*
2986 * The K-WORLD DVB-T 310U is detected as an MSI Digivox AD.
2987 *
2988 * This occurs because they share identical USB vendor and
2989 * product IDs.
2990 *
2991 * What we do here is look up the EEPROM hash of the K-WORLD
2992 * and if it is found then we decide that we do not have
2993 * a DIGIVOX and reset the device to the K-WORLD instead.
2994 *
2995 * This solution is only valid if they do not share eeprom
2996 * hash identities which has not been determined as yet.
2997 */
2998 case EM2880_BOARD_MSI_DIGIVOX_AD:
2999 if (!em28xx_hint_board(dev))
3000 em28xx_set_model(dev);
3001
3002 /* In cases where we had to use a board hint, the call to
3003 em28xx_set_mode() in em28xx_pre_card_setup() was a no-op,
3004 so make the call now so the analog GPIOs are set properly
3005 before probing the i2c bus. */
3006 em28xx_gpio_set(dev, dev->board.tuner_gpio);
3007 em28xx_set_mode(dev, EM28XX_ANALOG_MODE);
3008 break;
3009
3010 /*
3011 * The Dikom DK300 is detected as an Kworld VS-DVB-T 323UR.
3012 *
3013 * This occurs because they share identical USB vendor and
3014 * product IDs.
3015 *
3016 * What we do here is look up the EEPROM hash of the Dikom
3017 * and if it is found then we decide that we do not have
3018 * a Kworld and reset the device to the Dikom instead.
3019 *
3020 * This solution is only valid if they do not share eeprom
3021 * hash identities which has not been determined as yet.
3022 */
3023 case EM2882_BOARD_KWORLD_VS_DVBT:
3024 if (!em28xx_hint_board(dev))
3025 em28xx_set_model(dev);
3026
3027 /* In cases where we had to use a board hint, the call to
3028 em28xx_set_mode() in em28xx_pre_card_setup() was a no-op,
3029 so make the call now so the analog GPIOs are set properly
3030 before probing the i2c bus. */
3031 em28xx_gpio_set(dev, dev->board.tuner_gpio);
3032 em28xx_set_mode(dev, EM28XX_ANALOG_MODE);
3033 break;
3034 }
3035
3036 if (dev->board.valid == EM28XX_BOARD_NOT_VALIDATED) {
3037 em28xx_errdev("\n\n");
3038 em28xx_errdev("The support for this board weren't "
3039 "valid yet.\n");
3040 em28xx_errdev("Please send a report of having this working\n");
3041 em28xx_errdev("not to V4L mailing list (and/or to other "
3042 "addresses)\n\n");
3043 }
3044
3045 /* Free eeprom data memory */
3046 kfree(dev->eedata);
3047 dev->eedata = NULL;
3048
3049 /* Allow override tuner type by a module parameter */
3050 if (tuner >= 0)
3051 dev->tuner_type = tuner;
3052 }
3053
3054 void em28xx_setup_xc3028(struct em28xx *dev, struct xc2028_ctrl *ctl)
3055 {
3056 memset(ctl, 0, sizeof(*ctl));
3057
3058 ctl->fname = XC2028_DEFAULT_FIRMWARE;
3059 ctl->max_len = 64;
3060 ctl->mts = em28xx_boards[dev->model].mts_firmware;
3061
3062 switch (dev->model) {
3063 case EM2880_BOARD_EMPIRE_DUAL_TV:
3064 case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900:
3065 case EM2882_BOARD_TERRATEC_HYBRID_XS:
3066 ctl->demod = XC3028_FE_ZARLINK456;
3067 break;
3068 case EM2880_BOARD_TERRATEC_HYBRID_XS:
3069 case EM2880_BOARD_TERRATEC_HYBRID_XS_FR:
3070 case EM2881_BOARD_PINNACLE_HYBRID_PRO:
3071 ctl->demod = XC3028_FE_ZARLINK456;
3072 break;
3073 case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2:
3074 case EM2882_BOARD_PINNACLE_HYBRID_PRO_330E:
3075 ctl->demod = XC3028_FE_DEFAULT;
3076 break;
3077 case EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600:
3078 ctl->demod = XC3028_FE_DEFAULT;
3079 ctl->fname = XC3028L_DEFAULT_FIRMWARE;
3080 break;
3081 case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850:
3082 case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950:
3083 case EM2880_BOARD_PINNACLE_PCTV_HD_PRO:
3084 /* FIXME: Better to specify the needed IF */
3085 ctl->demod = XC3028_FE_DEFAULT;
3086 break;
3087 case EM2883_BOARD_KWORLD_HYBRID_330U:
3088 case EM2882_BOARD_DIKOM_DK300:
3089 case EM2882_BOARD_KWORLD_VS_DVBT:
3090 ctl->demod = XC3028_FE_CHINA;
3091 ctl->fname = XC2028_DEFAULT_FIRMWARE;
3092 break;
3093 case EM2882_BOARD_EVGA_INDTUBE:
3094 ctl->demod = XC3028_FE_CHINA;
3095 ctl->fname = XC3028L_DEFAULT_FIRMWARE;
3096 break;
3097 default:
3098 ctl->demod = XC3028_FE_OREN538;
3099 }
3100 }
3101 EXPORT_SYMBOL_GPL(em28xx_setup_xc3028);
3102
3103 static void request_module_async(struct work_struct *work)
3104 {
3105 struct em28xx *dev = container_of(work,
3106 struct em28xx, request_module_wk);
3107
3108 /*
3109 * The em28xx extensions can be modules or builtin. If the
3110 * modules are already loaded or are built in, those extensions
3111 * can be initialised right now. Otherwise, the module init
3112 * code will do it.
3113 */
3114
3115 /*
3116 * Devicdes with an audio-only interface also have a V4L/DVB/RC
3117 * interface. Don't register extensions twice on those devices.
3118 */
3119 if (dev->is_audio_only) {
3120 #if defined(CONFIG_MODULES) && defined(MODULE)
3121 request_module("em28xx-alsa");
3122 #endif
3123 return;
3124 }
3125
3126 em28xx_init_extension(dev);
3127
3128 #if defined(CONFIG_MODULES) && defined(MODULE)
3129 if (dev->has_video)
3130 request_module("em28xx-v4l");
3131 if (dev->usb_audio_type == EM28XX_USB_AUDIO_CLASS)
3132 request_module("snd-usb-audio");
3133 else if (dev->usb_audio_type == EM28XX_USB_AUDIO_VENDOR)
3134 request_module("em28xx-alsa");
3135 if (dev->board.has_dvb)
3136 request_module("em28xx-dvb");
3137 if (dev->board.buttons ||
3138 ((dev->board.ir_codes || dev->board.has_ir_i2c) && !disable_ir))
3139 request_module("em28xx-rc");
3140 #endif /* CONFIG_MODULES */
3141 }
3142
3143 static void request_modules(struct em28xx *dev)
3144 {
3145 INIT_WORK(&dev->request_module_wk, request_module_async);
3146 schedule_work(&dev->request_module_wk);
3147 }
3148
3149 static void flush_request_modules(struct em28xx *dev)
3150 {
3151 flush_work(&dev->request_module_wk);
3152 }
3153
3154 static int em28xx_media_device_init(struct em28xx *dev,
3155 struct usb_device *udev)
3156 {
3157 #ifdef CONFIG_MEDIA_CONTROLLER
3158 struct media_device *mdev;
3159
3160 mdev = kzalloc(sizeof(*mdev), GFP_KERNEL);
3161 if (!mdev)
3162 return -ENOMEM;
3163
3164 if (udev->product)
3165 media_device_usb_init(mdev, udev, udev->product);
3166 else if (udev->manufacturer)
3167 media_device_usb_init(mdev, udev, udev->manufacturer);
3168 else
3169 media_device_usb_init(mdev, udev, dev->name);
3170
3171 dev->media_dev = mdev;
3172 #endif
3173 return 0;
3174 }
3175
3176 static void em28xx_unregister_media_device(struct em28xx *dev)
3177 {
3178
3179 #ifdef CONFIG_MEDIA_CONTROLLER
3180 if (dev->media_dev) {
3181 media_device_unregister(dev->media_dev);
3182 media_device_cleanup(dev->media_dev);
3183 kfree(dev->media_dev);
3184 dev->media_dev = NULL;
3185 }
3186 #endif
3187 }
3188
3189 /*
3190 * em28xx_release_resources()
3191 * unregisters the v4l2,i2c and usb devices
3192 * called when the device gets disconnected or at module unload
3193 */
3194 static void em28xx_release_resources(struct em28xx *dev)
3195 {
3196 /*FIXME: I2C IR should be disconnected */
3197
3198 mutex_lock(&dev->lock);
3199
3200 em28xx_unregister_media_device(dev);
3201
3202 if (dev->def_i2c_bus)
3203 em28xx_i2c_unregister(dev, 1);
3204 em28xx_i2c_unregister(dev, 0);
3205
3206 usb_put_dev(dev->udev);
3207
3208 /* Mark device as unused */
3209 clear_bit(dev->devno, em28xx_devused);
3210
3211 mutex_unlock(&dev->lock);
3212 };
3213
3214 /**
3215 * em28xx_free_device() - Free em28xx device
3216 *
3217 * @ref: struct kref for em28xx device
3218 *
3219 * This is called when all extensions and em28xx core unregisters a device
3220 */
3221 void em28xx_free_device(struct kref *ref)
3222 {
3223 struct em28xx *dev = kref_to_dev(ref);
3224
3225 em28xx_info("Freeing device\n");
3226
3227 if (!dev->disconnected)
3228 em28xx_release_resources(dev);
3229
3230 kfree(dev->alt_max_pkt_size_isoc);
3231 kfree(dev);
3232 }
3233 EXPORT_SYMBOL_GPL(em28xx_free_device);
3234
3235 /*
3236 * em28xx_init_dev()
3237 * allocates and inits the device structs, registers i2c bus and v4l device
3238 */
3239 static int em28xx_init_dev(struct em28xx *dev, struct usb_device *udev,
3240 struct usb_interface *interface,
3241 int minor)
3242 {
3243 int retval;
3244 static const char *default_chip_name = "em28xx";
3245 const char *chip_name = default_chip_name;
3246
3247 dev->udev = udev;
3248 mutex_init(&dev->ctrl_urb_lock);
3249 spin_lock_init(&dev->slock);
3250
3251 dev->em28xx_write_regs = em28xx_write_regs;
3252 dev->em28xx_read_reg = em28xx_read_reg;
3253 dev->em28xx_read_reg_req_len = em28xx_read_reg_req_len;
3254 dev->em28xx_write_regs_req = em28xx_write_regs_req;
3255 dev->em28xx_read_reg_req = em28xx_read_reg_req;
3256 dev->board.is_em2800 = em28xx_boards[dev->model].is_em2800;
3257
3258 em28xx_set_model(dev);
3259
3260 dev->wait_after_write = 5;
3261
3262 /* Based on the Chip ID, set the device configuration */
3263 retval = em28xx_read_reg(dev, EM28XX_R0A_CHIPID);
3264 if (retval > 0) {
3265 dev->chip_id = retval;
3266
3267 switch (dev->chip_id) {
3268 case CHIP_ID_EM2800:
3269 chip_name = "em2800";
3270 break;
3271 case CHIP_ID_EM2710:
3272 chip_name = "em2710";
3273 break;
3274 case CHIP_ID_EM2750:
3275 chip_name = "em2750";
3276 break;
3277 case CHIP_ID_EM2765:
3278 chip_name = "em2765";
3279 dev->wait_after_write = 0;
3280 dev->is_em25xx = 1;
3281 dev->eeprom_addrwidth_16bit = 1;
3282 break;
3283 case CHIP_ID_EM2820:
3284 chip_name = "em2710/2820";
3285 if (le16_to_cpu(dev->udev->descriptor.idVendor)
3286 == 0xeb1a) {
3287 __le16 idProd = dev->udev->descriptor.idProduct;
3288
3289 if (le16_to_cpu(idProd) == 0x2710)
3290 chip_name = "em2710";
3291 else if (le16_to_cpu(idProd) == 0x2820)
3292 chip_name = "em2820";
3293 }
3294 /* NOTE: the em2820 is used in webcams, too ! */
3295 break;
3296 case CHIP_ID_EM2840:
3297 chip_name = "em2840";
3298 break;
3299 case CHIP_ID_EM2860:
3300 chip_name = "em2860";
3301 break;
3302 case CHIP_ID_EM2870:
3303 chip_name = "em2870";
3304 dev->wait_after_write = 0;
3305 break;
3306 case CHIP_ID_EM2874:
3307 chip_name = "em2874";
3308 dev->wait_after_write = 0;
3309 dev->eeprom_addrwidth_16bit = 1;
3310 break;
3311 case CHIP_ID_EM28174:
3312 chip_name = "em28174";
3313 dev->wait_after_write = 0;
3314 dev->eeprom_addrwidth_16bit = 1;
3315 break;
3316 case CHIP_ID_EM28178:
3317 chip_name = "em28178";
3318 dev->wait_after_write = 0;
3319 dev->eeprom_addrwidth_16bit = 1;
3320 break;
3321 case CHIP_ID_EM2883:
3322 chip_name = "em2882/3";
3323 dev->wait_after_write = 0;
3324 break;
3325 case CHIP_ID_EM2884:
3326 chip_name = "em2884";
3327 dev->wait_after_write = 0;
3328 dev->eeprom_addrwidth_16bit = 1;
3329 break;
3330 default:
3331 printk(KERN_INFO DRIVER_NAME
3332 ": unknown em28xx chip ID (%d)\n", dev->chip_id);
3333 }
3334 }
3335
3336 if (chip_name != default_chip_name)
3337 printk(KERN_INFO DRIVER_NAME
3338 ": chip ID is %s\n", chip_name);
3339
3340 /*
3341 * For em2820/em2710, the name may change latter, after checking
3342 * if the device has a sensor (so, it is em2710) or not.
3343 */
3344 snprintf(dev->name, sizeof(dev->name), "%s #%d", chip_name, dev->devno);
3345
3346 em28xx_media_device_init(dev, udev);
3347
3348 if (dev->is_audio_only) {
3349 retval = em28xx_audio_setup(dev);
3350 if (retval)
3351 return -ENODEV;
3352 em28xx_init_extension(dev);
3353
3354 return 0;
3355 }
3356
3357 em28xx_pre_card_setup(dev);
3358
3359 if (!dev->board.is_em2800) {
3360 /* Resets I2C speed */
3361 retval = em28xx_write_reg(dev, EM28XX_R06_I2C_CLK, dev->board.i2c_speed);
3362 if (retval < 0) {
3363 em28xx_errdev("%s: em28xx_write_reg failed!"
3364 " retval [%d]\n",
3365 __func__, retval);
3366 return retval;
3367 }
3368 }
3369
3370 rt_mutex_init(&dev->i2c_bus_lock);
3371
3372 /* register i2c bus 0 */
3373 if (dev->board.is_em2800)
3374 retval = em28xx_i2c_register(dev, 0, EM28XX_I2C_ALGO_EM2800);
3375 else
3376 retval = em28xx_i2c_register(dev, 0, EM28XX_I2C_ALGO_EM28XX);
3377 if (retval < 0) {
3378 em28xx_errdev("%s: em28xx_i2c_register bus 0 - error [%d]!\n",
3379 __func__, retval);
3380 return retval;
3381 }
3382
3383 /* register i2c bus 1 */
3384 if (dev->def_i2c_bus) {
3385 if (dev->is_em25xx)
3386 retval = em28xx_i2c_register(dev, 1,
3387 EM28XX_I2C_ALGO_EM25XX_BUS_B);
3388 else
3389 retval = em28xx_i2c_register(dev, 1,
3390 EM28XX_I2C_ALGO_EM28XX);
3391 if (retval < 0) {
3392 em28xx_errdev("%s: em28xx_i2c_register bus 1 - error [%d]!\n",
3393 __func__, retval);
3394
3395 em28xx_i2c_unregister(dev, 0);
3396
3397 return retval;
3398 }
3399 }
3400
3401 /* Do board specific init and eeprom reading */
3402 em28xx_card_setup(dev);
3403
3404 return 0;
3405 }
3406
3407 /* high bandwidth multiplier, as encoded in highspeed endpoint descriptors */
3408 #define hb_mult(wMaxPacketSize) (1 + (((wMaxPacketSize) >> 11) & 0x03))
3409
3410 /*
3411 * em28xx_usb_probe()
3412 * checks for supported devices
3413 */
3414 static int em28xx_usb_probe(struct usb_interface *interface,
3415 const struct usb_device_id *id)
3416 {
3417 struct usb_device *udev;
3418 struct em28xx *dev = NULL;
3419 int retval;
3420 bool has_vendor_audio = false, has_video = false, has_dvb = false;
3421 int i, nr, try_bulk;
3422 const int ifnum = interface->altsetting[0].desc.bInterfaceNumber;
3423 char *speed;
3424
3425 udev = usb_get_dev(interface_to_usbdev(interface));
3426
3427 /* Check to see next free device and mark as used */
3428 do {
3429 nr = find_first_zero_bit(em28xx_devused, EM28XX_MAXBOARDS);
3430 if (nr >= EM28XX_MAXBOARDS) {
3431 /* No free device slots */
3432 printk(DRIVER_NAME ": Supports only %i em28xx boards.\n",
3433 EM28XX_MAXBOARDS);
3434 retval = -ENOMEM;
3435 goto err_no_slot;
3436 }
3437 } while (test_and_set_bit(nr, em28xx_devused));
3438
3439 /* Don't register audio interfaces */
3440 if (interface->altsetting[0].desc.bInterfaceClass == USB_CLASS_AUDIO) {
3441 em28xx_err(DRIVER_NAME " audio device (%04x:%04x): "
3442 "interface %i, class %i\n",
3443 le16_to_cpu(udev->descriptor.idVendor),
3444 le16_to_cpu(udev->descriptor.idProduct),
3445 ifnum,
3446 interface->altsetting[0].desc.bInterfaceClass);
3447
3448 retval = -ENODEV;
3449 goto err;
3450 }
3451
3452 /* allocate memory for our device state and initialize it */
3453 dev = kzalloc(sizeof(*dev), GFP_KERNEL);
3454 if (dev == NULL) {
3455 em28xx_err(DRIVER_NAME ": out of memory!\n");
3456 retval = -ENOMEM;
3457 goto err;
3458 }
3459
3460 /* compute alternate max packet sizes */
3461 dev->alt_max_pkt_size_isoc =
3462 kmalloc(sizeof(dev->alt_max_pkt_size_isoc[0]) *
3463 interface->num_altsetting, GFP_KERNEL);
3464 if (dev->alt_max_pkt_size_isoc == NULL) {
3465 em28xx_errdev("out of memory!\n");
3466 kfree(dev);
3467 retval = -ENOMEM;
3468 goto err;
3469 }
3470
3471 /* Get endpoints */
3472 for (i = 0; i < interface->num_altsetting; i++) {
3473 int ep;
3474
3475 for (ep = 0; ep < interface->altsetting[i].desc.bNumEndpoints; ep++) {
3476 const struct usb_endpoint_descriptor *e;
3477 int sizedescr, size;
3478
3479 e = &interface->altsetting[i].endpoint[ep].desc;
3480
3481 sizedescr = le16_to_cpu(e->wMaxPacketSize);
3482 size = sizedescr & 0x7ff;
3483
3484 if (udev->speed == USB_SPEED_HIGH)
3485 size = size * hb_mult(sizedescr);
3486
3487 if (usb_endpoint_dir_in(e)) {
3488 switch (e->bEndpointAddress) {
3489 case 0x82:
3490 has_video = true;
3491 if (usb_endpoint_xfer_isoc(e)) {
3492 dev->analog_ep_isoc =
3493 e->bEndpointAddress;
3494 dev->alt_max_pkt_size_isoc[i] = size;
3495 } else if (usb_endpoint_xfer_bulk(e)) {
3496 dev->analog_ep_bulk =
3497 e->bEndpointAddress;
3498 }
3499 break;
3500 case 0x83:
3501 if (usb_endpoint_xfer_isoc(e)) {
3502 has_vendor_audio = true;
3503 } else {
3504 printk(KERN_INFO DRIVER_NAME
3505 ": error: skipping audio endpoint 0x83, because it uses bulk transfers !\n");
3506 }
3507 break;
3508 case 0x84:
3509 if (has_video &&
3510 (usb_endpoint_xfer_bulk(e))) {
3511 dev->analog_ep_bulk =
3512 e->bEndpointAddress;
3513 } else {
3514 if (usb_endpoint_xfer_isoc(e)) {
3515 if (size > dev->dvb_max_pkt_size_isoc) {
3516 has_dvb = true; /* see NOTE (~) */
3517 dev->dvb_ep_isoc = e->bEndpointAddress;
3518 dev->dvb_max_pkt_size_isoc = size;
3519 dev->dvb_alt_isoc = i;
3520 }
3521 } else {
3522 has_dvb = true;
3523 dev->dvb_ep_bulk = e->bEndpointAddress;
3524 }
3525 }
3526 break;
3527 }
3528 }
3529 /* NOTE:
3530 * Old logic with support for isoc transfers only was:
3531 * 0x82 isoc => analog
3532 * 0x83 isoc => audio
3533 * 0x84 isoc => digital
3534 *
3535 * New logic with support for bulk transfers
3536 * 0x82 isoc => analog
3537 * 0x82 bulk => analog
3538 * 0x83 isoc* => audio
3539 * 0x84 isoc => digital
3540 * 0x84 bulk => analog or digital**
3541 * (*: audio should always be isoc)
3542 * (**: analog, if ep 0x82 is isoc, otherwise digital)
3543 *
3544 * The new logic preserves backwards compatibility and
3545 * reflects the endpoint configurations we have seen
3546 * so far. But there might be devices for which this
3547 * logic is not sufficient...
3548 */
3549 /*
3550 * NOTE (~): some manufacturers (e.g. Terratec) disable
3551 * endpoints by setting wMaxPacketSize to 0 bytes for
3552 * all alt settings. So far, we've seen this for
3553 * DVB isoc endpoints only.
3554 */
3555 }
3556 }
3557
3558 if (!(has_vendor_audio || has_video || has_dvb)) {
3559 retval = -ENODEV;
3560 goto err_free;
3561 }
3562
3563 switch (udev->speed) {
3564 case USB_SPEED_LOW:
3565 speed = "1.5";
3566 break;
3567 case USB_SPEED_UNKNOWN:
3568 case USB_SPEED_FULL:
3569 speed = "12";
3570 break;
3571 case USB_SPEED_HIGH:
3572 speed = "480";
3573 break;
3574 default:
3575 speed = "unknown";
3576 }
3577
3578 printk(KERN_INFO DRIVER_NAME
3579 ": New device %s %s @ %s Mbps "
3580 "(%04x:%04x, interface %d, class %d)\n",
3581 udev->manufacturer ? udev->manufacturer : "",
3582 udev->product ? udev->product : "",
3583 speed,
3584 le16_to_cpu(udev->descriptor.idVendor),
3585 le16_to_cpu(udev->descriptor.idProduct),
3586 ifnum,
3587 interface->altsetting->desc.bInterfaceNumber);
3588
3589 /*
3590 * Make sure we have 480 Mbps of bandwidth, otherwise things like
3591 * video stream wouldn't likely work, since 12 Mbps is generally
3592 * not enough even for most Digital TV streams.
3593 */
3594 if (udev->speed != USB_SPEED_HIGH && disable_usb_speed_check == 0) {
3595 printk(DRIVER_NAME ": Device initialization failed.\n");
3596 printk(DRIVER_NAME ": Device must be connected to a high-speed"
3597 " USB 2.0 port.\n");
3598 retval = -ENODEV;
3599 goto err_free;
3600 }
3601
3602 dev->devno = nr;
3603 dev->model = id->driver_info;
3604 dev->alt = -1;
3605 dev->is_audio_only = has_vendor_audio && !(has_video || has_dvb);
3606 dev->has_video = has_video;
3607 dev->ifnum = ifnum;
3608
3609 if (has_vendor_audio) {
3610 printk(KERN_INFO DRIVER_NAME ": Audio interface %i found %s\n",
3611 ifnum, "(Vendor Class)");
3612 dev->usb_audio_type = EM28XX_USB_AUDIO_VENDOR;
3613 }
3614 /* Checks if audio is provided by a USB Audio Class interface */
3615 for (i = 0; i < udev->config->desc.bNumInterfaces; i++) {
3616 struct usb_interface *uif = udev->config->interface[i];
3617
3618 if (uif->altsetting[0].desc.bInterfaceClass == USB_CLASS_AUDIO) {
3619 if (has_vendor_audio)
3620 em28xx_err("em28xx: device seems to have vendor AND usb audio class interfaces !\n"
3621 "\t\tThe vendor interface will be ignored. Please contact the developers <linux-media@vger.kernel.org>\n");
3622 dev->usb_audio_type = EM28XX_USB_AUDIO_CLASS;
3623 break;
3624 }
3625 }
3626
3627 if (has_video)
3628 printk(KERN_INFO DRIVER_NAME
3629 ": Video interface %i found:%s%s\n",
3630 ifnum,
3631 dev->analog_ep_bulk ? " bulk" : "",
3632 dev->analog_ep_isoc ? " isoc" : "");
3633 if (has_dvb)
3634 printk(KERN_INFO DRIVER_NAME
3635 ": DVB interface %i found:%s%s\n",
3636 ifnum,
3637 dev->dvb_ep_bulk ? " bulk" : "",
3638 dev->dvb_ep_isoc ? " isoc" : "");
3639
3640 dev->num_alt = interface->num_altsetting;
3641
3642 if ((unsigned)card[nr] < em28xx_bcount)
3643 dev->model = card[nr];
3644
3645 /* save our data pointer in this interface device */
3646 usb_set_intfdata(interface, dev);
3647
3648 /* allocate device struct and check if the device is a webcam */
3649 mutex_init(&dev->lock);
3650 retval = em28xx_init_dev(dev, udev, interface, nr);
3651 if (retval) {
3652 goto err_free;
3653 }
3654
3655 if (usb_xfer_mode < 0) {
3656 if (dev->board.is_webcam)
3657 try_bulk = 1;
3658 else
3659 try_bulk = 0;
3660 } else {
3661 try_bulk = usb_xfer_mode > 0;
3662 }
3663
3664 /* Disable V4L2 if the device doesn't have a decoder */
3665 if (has_video &&
3666 dev->board.decoder == EM28XX_NODECODER && !dev->board.is_webcam) {
3667 printk(DRIVER_NAME
3668 ": Currently, V4L2 is not supported on this model\n");
3669 has_video = false;
3670 dev->has_video = false;
3671 }
3672
3673 /* Select USB transfer types to use */
3674 if (has_video) {
3675 if (!dev->analog_ep_isoc || (try_bulk && dev->analog_ep_bulk))
3676 dev->analog_xfer_bulk = 1;
3677 em28xx_info("analog set to %s mode.\n",
3678 dev->analog_xfer_bulk ? "bulk" : "isoc");
3679 }
3680 if (has_dvb) {
3681 if (!dev->dvb_ep_isoc || (try_bulk && dev->dvb_ep_bulk))
3682 dev->dvb_xfer_bulk = 1;
3683 em28xx_info("dvb set to %s mode.\n",
3684 dev->dvb_xfer_bulk ? "bulk" : "isoc");
3685 }
3686
3687 kref_init(&dev->ref);
3688
3689 request_modules(dev);
3690
3691 /*
3692 * Do it at the end, to reduce dynamic configuration changes during
3693 * the device init. Yet, as request_modules() can be async, the
3694 * topology will likely change after the load of the em28xx subdrivers.
3695 */
3696 #ifdef CONFIG_MEDIA_CONTROLLER
3697 retval = media_device_register(dev->media_dev);
3698 #endif
3699
3700 return 0;
3701
3702 err_free:
3703 kfree(dev->alt_max_pkt_size_isoc);
3704 kfree(dev);
3705
3706 err:
3707 clear_bit(nr, em28xx_devused);
3708
3709 err_no_slot:
3710 usb_put_dev(udev);
3711 return retval;
3712 }
3713
3714 /*
3715 * em28xx_usb_disconnect()
3716 * called when the device gets disconnected
3717 * video device will be unregistered on v4l2_close in case it is still open
3718 */
3719 static void em28xx_usb_disconnect(struct usb_interface *interface)
3720 {
3721 struct em28xx *dev;
3722
3723 dev = usb_get_intfdata(interface);
3724 usb_set_intfdata(interface, NULL);
3725
3726 if (!dev)
3727 return;
3728
3729 dev->disconnected = 1;
3730
3731 em28xx_info("Disconnecting %s\n", dev->name);
3732
3733 flush_request_modules(dev);
3734
3735 em28xx_close_extension(dev);
3736
3737 em28xx_release_resources(dev);
3738 kref_put(&dev->ref, em28xx_free_device);
3739 }
3740
3741 static int em28xx_usb_suspend(struct usb_interface *interface,
3742 pm_message_t message)
3743 {
3744 struct em28xx *dev;
3745
3746 dev = usb_get_intfdata(interface);
3747 if (!dev)
3748 return 0;
3749 em28xx_suspend_extension(dev);
3750 return 0;
3751 }
3752
3753 static int em28xx_usb_resume(struct usb_interface *interface)
3754 {
3755 struct em28xx *dev;
3756
3757 dev = usb_get_intfdata(interface);
3758 if (!dev)
3759 return 0;
3760 em28xx_resume_extension(dev);
3761 return 0;
3762 }
3763
3764 static struct usb_driver em28xx_usb_driver = {
3765 .name = "em28xx",
3766 .probe = em28xx_usb_probe,
3767 .disconnect = em28xx_usb_disconnect,
3768 .suspend = em28xx_usb_suspend,
3769 .resume = em28xx_usb_resume,
3770 .reset_resume = em28xx_usb_resume,
3771 .id_table = em28xx_id_table,
3772 };
3773
3774 module_usb_driver(em28xx_usb_driver);
Linux with added FPC-III support