Documentation/devicetree/bindings/hwmon/ntc_thermistor.txt

   1 NTC Thermistor hwmon sensors
   2 -------------------------------
   3
   4 Requires node properties:
   5 - "compatible" value : one of
   6         "ntc,ncp15wb473"
   7         "ntc,ncp18wb473"
   8         "ntc,ncp21wb473"
   9         "ntc,ncp03wb473"
  10         "ntc,ncp15wl333"
  11 - "pullup-uv"   Pull up voltage in micro volts
  12 - "pullup-ohm"  Pull up resistor value in ohms
  13 - "pulldown-ohm" Pull down resistor value in ohms
  14 - "connected-positive" Always ON, If not specified.
  15                 Status change is possible.
  16 - "io-channels" Channel node of ADC to be used for
  17                 conversion.
  18
  19 Read more about iio bindings at
  20         Documentation/devicetree/bindings/iio/iio-bindings.txt
  21
  22 Example:
  23         ncp15wb473@0 {
  24                 compatible = "ntc,ncp15wb473";
  25                 pullup-uv = <1800000>;
  26                 pullup-ohm = <47000>;
  27                 pulldown-ohm = <0>;
  28                 io-channels = <&adc 3>;
  29         };