Documentation/devicetree/bindings/clock/st/st,clkgen.txt

   1 Binding for a Clockgen hardware block found on
   2 certain STMicroelectronics consumer electronics SoC devices.
   3
   4 A Clockgen node can contain pll, diviser or multiplexer nodes.
   5
   6 We will find only the base address of the Clockgen, this base
   7 address is common of all subnode.
   8
   9         clockgen_node {
  10                 reg = <>;
  11
  12                 pll_node {
  13                         ...
  14                 };
  15
  16                 quadfs_node {
  17                         ...
  18                 };
  19
  20                 mux_node {
  21                         ...
  22                 };
  23
  24                 flexgen_node {
  25                         ...
  26                 };
  27                 ...
  28         };
  29
  30 This binding uses the common clock binding[1].
  31 Each subnode should use the binding described in [2]..[7]
  32
  33 [1] Documentation/devicetree/bindings/clock/clock-bindings.txt
  34 [3] Documentation/devicetree/bindings/clock/st,clkgen-mux.txt
  35 [4] Documentation/devicetree/bindings/clock/st,clkgen-pll.txt
  36 [7] Documentation/devicetree/bindings/clock/st,quadfs.txt
  37 [8] Documentation/devicetree/bindings/clock/st,flexgen.txt
  38
  39
  40 Required properties:
  41 - reg : A Base address and length of the register set.
  42
  43 Example:
  44
  45         clockgen-a@90ff000 {
  46                 compatible = "st,clkgen-c32";
  47                 reg = <0x90ff000 0x1000>;
  48
  49                 clk_s_a0_pll: clk-s-a0-pll {
  50                         #clock-cells = <1>;
  51                         compatible = "st,clkgen-pll0";
  52
  53                         clocks = <&clk_sysin>;
  54
  55                         clock-output-names = "clk-s-a0-pll-ofd-0";
  56                 };
  57
  58                 clk_s_a0_flexgen: clk-s-a0-flexgen {
  59                         compatible = "st,flexgen";
  60
  61                         #clock-cells = <1>;
  62
  63                         clocks = <&clk_s_a0_pll 0>,
  64                                  <&clk_sysin>;
  65
  66                         clock-output-names = "clk-ic-lmi0";
  67                 };
  68         };