Documentation/devicetree/bindings/media/i2c/nokia,smia.txt

   1 SMIA/SMIA++ sensor
   2
   3 SMIA (Standard Mobile Imaging Architecture) is an image sensor standard
   4 defined jointly by Nokia and ST. SMIA++, defined by Nokia, is an extension
   5 of that. These definitions are valid for both types of sensors.
   6
   7 More detailed documentation can be found in
   8 Documentation/devicetree/bindings/media/video-interfaces.txt .
   9
  10
  11 Mandatory properties
  12 --------------------
  13
  14 - compatible: "nokia,smia"
  15 - reg: I2C address (0x10, or an alternative address)
  16 - vana-supply: Analogue voltage supply (VANA), typically 2,8 volts (sensor
  17   dependent).
  18 - clocks: External clock to the sensor
  19 - clock-frequency: Frequency of the external clock to the sensor
  20 - link-frequencies: List of allowed data link frequencies. An array of
  21   64-bit elements.
  22
  23
  24 Optional properties
  25 -------------------
  26
  27 - nokia,nvm-size: The size of the NVM, in bytes. If the size is not given,
  28   the NVM contents will not be read.
  29 - reset-gpios: XSHUTDOWN GPIO
  30 - flash-leds: See ../video-interfaces.txt
  31 - lens-focus: See ../video-interfaces.txt
  32
  33
  34 Endpoint node mandatory properties
  35 ----------------------------------
  36
  37 - clock-lanes: <0>
  38 - data-lanes: <1..n>
  39 - remote-endpoint: A phandle to the bus receiver's endpoint node.
  40
  41
  42 Example
  43 -------
  44
  45 &i2c2 {
  46         clock-frequency = <400000>;
  47
  48         smiapp_1: camera@10 {
  49                 compatible = "nokia,smia";
  50                 reg = <0x10>;
  51                 reset-gpios = <&gpio3 20 0>;
  52                 vana-supply = <&vaux3>;
  53                 clocks = <&omap3_isp 0>;
  54                 clock-frequency = <9600000>;
  55                 nokia,nvm-size = <512>; /* 8 * 64 */
  56                 link-frequencies = /bits/ 64 <199200000 210000000 499200000>;
  57                 port {
  58                         smiapp_1_1: endpoint {
  59                                 clock-lanes = <0>;
  60                                 data-lanes = <1 2>;
  61                                 remote-endpoint = <&csi2a_ep>;
  62                         };
  63                 };
  64         };
  65 };