Documentation/devicetree/bindings/media/i2c/ov2685.txt

   1 * Omnivision OV2685 MIPI CSI-2 sensor
   2
   3 Required Properties:
   4 - compatible: shall be "ovti,ov2685"
   5 - clocks: reference to the xvclk input clock
   6 - clock-names: shall be "xvclk"
   7 - avdd-supply: Analog voltage supply, 2.8 volts
   8 - dovdd-supply: Digital I/O voltage supply, 1.8 volts
   9 - dvdd-supply: Digital core voltage supply, 1.8 volts
  10 - reset-gpios: Low active reset gpio
  11
  12 The device node shall contain one 'port' child node with an
  13 'endpoint' subnode for its digital output video port,
  14 in accordance with the video interface bindings defined in
  15 Documentation/devicetree/bindings/media/video-interfaces.txt.
  16 The endpoint optional property 'data-lanes' shall be "<1>".
  17
  18 Example:
  19 &i2c7 {
  20         ov2685: camera-sensor@3c {
  21                 compatible = "ovti,ov2685";
  22                 reg = <0x3c>;
  23                 pinctrl-names = "default";
  24                 pinctrl-0 = <&clk_24m_cam>;
  25
  26                 clocks = <&cru SCLK_TESTCLKOUT1>;
  27                 clock-names = "xvclk";
  28
  29                 avdd-supply = <&pp2800_cam>;
  30                 dovdd-supply = <&pp1800>;
  31                 dvdd-supply = <&pp1800>;
  32                 reset-gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
  33
  34                 port {
  35                         ucam_out: endpoint {
  36                                 remote-endpoint = <&mipi_in_ucam>;
  37                                 data-lanes = <1>;
  38                         };
  39                 };
  40         };
  41 };