rtc: stm32: fix misspelling and misalignment issues
[linux/fpc-iii.git] / Documentation / devicetree / bindings / media / i2c / ov7740.txt
blobaf781c3a5f0ee2124851b7a912dbb7e89e3162b4
1 * Omnivision OV7740 CMOS image sensor
3 The Omnivision OV7740 image sensor supports multiple output image
4 size, such as VGA, and QVGA, CIF and any size smaller. It also
5 supports the RAW RGB and YUV output formats.
7 The common video interfaces bindings (see video-interfaces.txt) should
8 be used to specify link to the image data receiver. The OV7740 device
9 node should contain one 'port' child node with an 'endpoint' subnode.
11 Required Properties:
12 - compatible:   "ovti,ov7740".
13 - reg:          I2C slave address of the sensor.
14 - clocks:       Reference to the xvclk input clock.
15 - clock-names:  "xvclk".
17 Optional Properties:
18 - reset-gpios: Rreference to the GPIO connected to the reset_b pin,
19   if any. Active low with pull-ip resistor.
20 - powerdown-gpios: Reference to the GPIO connected to the pwdn pin,
21   if any. Active high with pull-down resistor.
23 Endpoint node mandatory properties:
24 - remote-endpoint: A phandle to the bus receiver's endpoint node.
26 Example:
28         i2c1: i2c@fc028000 {
29                 ov7740: camera@21 {
30                         compatible = "ovti,ov7740";
31                         reg = <0x21>;
32                         pinctrl-names = "default";
33                         pinctrl-0 = <&pinctrl_sensor_power &pinctrl_sensor_reset>;
34                         clocks = <&isc>;
35                         clock-names = "xvclk";
36                         assigned-clocks = <&isc>;
37                         assigned-clock-rates = <24000000>;
38                         reset-gpios = <&pioA 43 GPIO_ACTIVE_LOW>;
39                         powerdown-gpios = <&pioA 44 GPIO_ACTIVE_HIGH>;
41                         port {
42                                 ov7740_0: endpoint {
43                                         remote-endpoint = <&isc_0>;
44                                 };
45                         };
46                 };
47         };