x86/boot: Rename overlapping memcpy() to memmove()
[linux/fpc-iii.git] / arch / arm / mach-davinci / dm355.c
bloba0ecf499c2f227df04749df7cf477f5ae54a15d7
1 /*
2 * TI DaVinci DM355 chip specific setup
4 * Author: Kevin Hilman, Deep Root Systems, LLC
6 * 2007 (c) Deep Root Systems, LLC. This file is licensed under
7 * the terms of the GNU General Public License version 2. This program
8 * is licensed "as is" without any warranty of any kind, whether express
9 * or implied.
11 #include <linux/init.h>
12 #include <linux/clk.h>
13 #include <linux/serial_8250.h>
14 #include <linux/platform_device.h>
15 #include <linux/dma-mapping.h>
16 #include <linux/dmaengine.h>
17 #include <linux/spi/spi.h>
18 #include <linux/platform_data/edma.h>
19 #include <linux/platform_data/gpio-davinci.h>
20 #include <linux/platform_data/spi-davinci.h>
22 #include <asm/mach/map.h>
24 #include <mach/cputype.h>
25 #include "psc.h"
26 #include <mach/mux.h>
27 #include <mach/irqs.h>
28 #include <mach/time.h>
29 #include <mach/serial.h>
30 #include <mach/common.h>
32 #include "davinci.h"
33 #include "clock.h"
34 #include "mux.h"
35 #include "asp.h"
37 #define DM355_UART2_BASE (IO_PHYS + 0x206000)
38 #define DM355_OSD_BASE (IO_PHYS + 0x70200)
39 #define DM355_VENC_BASE (IO_PHYS + 0x70400)
42 * Device specific clocks
44 #define DM355_REF_FREQ 24000000 /* 24 or 36 MHz */
46 static struct pll_data pll1_data = {
47 .num = 1,
48 .phys_base = DAVINCI_PLL1_BASE,
49 .flags = PLL_HAS_PREDIV | PLL_HAS_POSTDIV,
52 static struct pll_data pll2_data = {
53 .num = 2,
54 .phys_base = DAVINCI_PLL2_BASE,
55 .flags = PLL_HAS_PREDIV,
58 static struct clk ref_clk = {
59 .name = "ref_clk",
60 /* FIXME -- crystal rate is board-specific */
61 .rate = DM355_REF_FREQ,
64 static struct clk pll1_clk = {
65 .name = "pll1",
66 .parent = &ref_clk,
67 .flags = CLK_PLL,
68 .pll_data = &pll1_data,
71 static struct clk pll1_aux_clk = {
72 .name = "pll1_aux_clk",
73 .parent = &pll1_clk,
74 .flags = CLK_PLL | PRE_PLL,
77 static struct clk pll1_sysclk1 = {
78 .name = "pll1_sysclk1",
79 .parent = &pll1_clk,
80 .flags = CLK_PLL,
81 .div_reg = PLLDIV1,
84 static struct clk pll1_sysclk2 = {
85 .name = "pll1_sysclk2",
86 .parent = &pll1_clk,
87 .flags = CLK_PLL,
88 .div_reg = PLLDIV2,
91 static struct clk pll1_sysclk3 = {
92 .name = "pll1_sysclk3",
93 .parent = &pll1_clk,
94 .flags = CLK_PLL,
95 .div_reg = PLLDIV3,
98 static struct clk pll1_sysclk4 = {
99 .name = "pll1_sysclk4",
100 .parent = &pll1_clk,
101 .flags = CLK_PLL,
102 .div_reg = PLLDIV4,
105 static struct clk pll1_sysclkbp = {
106 .name = "pll1_sysclkbp",
107 .parent = &pll1_clk,
108 .flags = CLK_PLL | PRE_PLL,
109 .div_reg = BPDIV
112 static struct clk vpss_dac_clk = {
113 .name = "vpss_dac",
114 .parent = &pll1_sysclk3,
115 .lpsc = DM355_LPSC_VPSS_DAC,
118 static struct clk vpss_master_clk = {
119 .name = "vpss_master",
120 .parent = &pll1_sysclk4,
121 .lpsc = DAVINCI_LPSC_VPSSMSTR,
122 .flags = CLK_PSC,
125 static struct clk vpss_slave_clk = {
126 .name = "vpss_slave",
127 .parent = &pll1_sysclk4,
128 .lpsc = DAVINCI_LPSC_VPSSSLV,
131 static struct clk clkout1_clk = {
132 .name = "clkout1",
133 .parent = &pll1_aux_clk,
134 /* NOTE: clkout1 can be externally gated by muxing GPIO-18 */
137 static struct clk clkout2_clk = {
138 .name = "clkout2",
139 .parent = &pll1_sysclkbp,
142 static struct clk pll2_clk = {
143 .name = "pll2",
144 .parent = &ref_clk,
145 .flags = CLK_PLL,
146 .pll_data = &pll2_data,
149 static struct clk pll2_sysclk1 = {
150 .name = "pll2_sysclk1",
151 .parent = &pll2_clk,
152 .flags = CLK_PLL,
153 .div_reg = PLLDIV1,
156 static struct clk pll2_sysclkbp = {
157 .name = "pll2_sysclkbp",
158 .parent = &pll2_clk,
159 .flags = CLK_PLL | PRE_PLL,
160 .div_reg = BPDIV
163 static struct clk clkout3_clk = {
164 .name = "clkout3",
165 .parent = &pll2_sysclkbp,
166 /* NOTE: clkout3 can be externally gated by muxing GPIO-16 */
169 static struct clk arm_clk = {
170 .name = "arm_clk",
171 .parent = &pll1_sysclk1,
172 .lpsc = DAVINCI_LPSC_ARM,
173 .flags = ALWAYS_ENABLED,
177 * NOT LISTED below, and not touched by Linux
178 * - in SyncReset state by default
179 * .lpsc = DAVINCI_LPSC_TPCC,
180 * .lpsc = DAVINCI_LPSC_TPTC0,
181 * .lpsc = DAVINCI_LPSC_TPTC1,
182 * .lpsc = DAVINCI_LPSC_DDR_EMIF, .parent = &sysclk2_clk,
183 * .lpsc = DAVINCI_LPSC_MEMSTICK,
184 * - in Enabled state by default
185 * .lpsc = DAVINCI_LPSC_SYSTEM_SUBSYS,
186 * .lpsc = DAVINCI_LPSC_SCR2, // "bus"
187 * .lpsc = DAVINCI_LPSC_SCR3, // "bus"
188 * .lpsc = DAVINCI_LPSC_SCR4, // "bus"
189 * .lpsc = DAVINCI_LPSC_CROSSBAR, // "emulation"
190 * .lpsc = DAVINCI_LPSC_CFG27, // "test"
191 * .lpsc = DAVINCI_LPSC_CFG3, // "test"
192 * .lpsc = DAVINCI_LPSC_CFG5, // "test"
195 static struct clk mjcp_clk = {
196 .name = "mjcp",
197 .parent = &pll1_sysclk1,
198 .lpsc = DAVINCI_LPSC_IMCOP,
201 static struct clk uart0_clk = {
202 .name = "uart0",
203 .parent = &pll1_aux_clk,
204 .lpsc = DAVINCI_LPSC_UART0,
207 static struct clk uart1_clk = {
208 .name = "uart1",
209 .parent = &pll1_aux_clk,
210 .lpsc = DAVINCI_LPSC_UART1,
213 static struct clk uart2_clk = {
214 .name = "uart2",
215 .parent = &pll1_sysclk2,
216 .lpsc = DAVINCI_LPSC_UART2,
219 static struct clk i2c_clk = {
220 .name = "i2c",
221 .parent = &pll1_aux_clk,
222 .lpsc = DAVINCI_LPSC_I2C,
225 static struct clk asp0_clk = {
226 .name = "asp0",
227 .parent = &pll1_sysclk2,
228 .lpsc = DAVINCI_LPSC_McBSP,
231 static struct clk asp1_clk = {
232 .name = "asp1",
233 .parent = &pll1_sysclk2,
234 .lpsc = DM355_LPSC_McBSP1,
237 static struct clk mmcsd0_clk = {
238 .name = "mmcsd0",
239 .parent = &pll1_sysclk2,
240 .lpsc = DAVINCI_LPSC_MMC_SD,
243 static struct clk mmcsd1_clk = {
244 .name = "mmcsd1",
245 .parent = &pll1_sysclk2,
246 .lpsc = DM355_LPSC_MMC_SD1,
249 static struct clk spi0_clk = {
250 .name = "spi0",
251 .parent = &pll1_sysclk2,
252 .lpsc = DAVINCI_LPSC_SPI,
255 static struct clk spi1_clk = {
256 .name = "spi1",
257 .parent = &pll1_sysclk2,
258 .lpsc = DM355_LPSC_SPI1,
261 static struct clk spi2_clk = {
262 .name = "spi2",
263 .parent = &pll1_sysclk2,
264 .lpsc = DM355_LPSC_SPI2,
267 static struct clk gpio_clk = {
268 .name = "gpio",
269 .parent = &pll1_sysclk2,
270 .lpsc = DAVINCI_LPSC_GPIO,
273 static struct clk aemif_clk = {
274 .name = "aemif",
275 .parent = &pll1_sysclk2,
276 .lpsc = DAVINCI_LPSC_AEMIF,
279 static struct clk pwm0_clk = {
280 .name = "pwm0",
281 .parent = &pll1_aux_clk,
282 .lpsc = DAVINCI_LPSC_PWM0,
285 static struct clk pwm1_clk = {
286 .name = "pwm1",
287 .parent = &pll1_aux_clk,
288 .lpsc = DAVINCI_LPSC_PWM1,
291 static struct clk pwm2_clk = {
292 .name = "pwm2",
293 .parent = &pll1_aux_clk,
294 .lpsc = DAVINCI_LPSC_PWM2,
297 static struct clk pwm3_clk = {
298 .name = "pwm3",
299 .parent = &pll1_aux_clk,
300 .lpsc = DM355_LPSC_PWM3,
303 static struct clk timer0_clk = {
304 .name = "timer0",
305 .parent = &pll1_aux_clk,
306 .lpsc = DAVINCI_LPSC_TIMER0,
309 static struct clk timer1_clk = {
310 .name = "timer1",
311 .parent = &pll1_aux_clk,
312 .lpsc = DAVINCI_LPSC_TIMER1,
315 static struct clk timer2_clk = {
316 .name = "timer2",
317 .parent = &pll1_aux_clk,
318 .lpsc = DAVINCI_LPSC_TIMER2,
319 .usecount = 1, /* REVISIT: why can't this be disabled? */
322 static struct clk timer3_clk = {
323 .name = "timer3",
324 .parent = &pll1_aux_clk,
325 .lpsc = DM355_LPSC_TIMER3,
328 static struct clk rto_clk = {
329 .name = "rto",
330 .parent = &pll1_aux_clk,
331 .lpsc = DM355_LPSC_RTO,
334 static struct clk usb_clk = {
335 .name = "usb",
336 .parent = &pll1_sysclk2,
337 .lpsc = DAVINCI_LPSC_USB,
340 static struct clk_lookup dm355_clks[] = {
341 CLK(NULL, "ref", &ref_clk),
342 CLK(NULL, "pll1", &pll1_clk),
343 CLK(NULL, "pll1_sysclk1", &pll1_sysclk1),
344 CLK(NULL, "pll1_sysclk2", &pll1_sysclk2),
345 CLK(NULL, "pll1_sysclk3", &pll1_sysclk3),
346 CLK(NULL, "pll1_sysclk4", &pll1_sysclk4),
347 CLK(NULL, "pll1_aux", &pll1_aux_clk),
348 CLK(NULL, "pll1_sysclkbp", &pll1_sysclkbp),
349 CLK(NULL, "vpss_dac", &vpss_dac_clk),
350 CLK("vpss", "master", &vpss_master_clk),
351 CLK("vpss", "slave", &vpss_slave_clk),
352 CLK(NULL, "clkout1", &clkout1_clk),
353 CLK(NULL, "clkout2", &clkout2_clk),
354 CLK(NULL, "pll2", &pll2_clk),
355 CLK(NULL, "pll2_sysclk1", &pll2_sysclk1),
356 CLK(NULL, "pll2_sysclkbp", &pll2_sysclkbp),
357 CLK(NULL, "clkout3", &clkout3_clk),
358 CLK(NULL, "arm", &arm_clk),
359 CLK(NULL, "mjcp", &mjcp_clk),
360 CLK("serial8250.0", NULL, &uart0_clk),
361 CLK("serial8250.1", NULL, &uart1_clk),
362 CLK("serial8250.2", NULL, &uart2_clk),
363 CLK("i2c_davinci.1", NULL, &i2c_clk),
364 CLK("davinci-mcbsp.0", NULL, &asp0_clk),
365 CLK("davinci-mcbsp.1", NULL, &asp1_clk),
366 CLK("dm6441-mmc.0", NULL, &mmcsd0_clk),
367 CLK("dm6441-mmc.1", NULL, &mmcsd1_clk),
368 CLK("spi_davinci.0", NULL, &spi0_clk),
369 CLK("spi_davinci.1", NULL, &spi1_clk),
370 CLK("spi_davinci.2", NULL, &spi2_clk),
371 CLK(NULL, "gpio", &gpio_clk),
372 CLK(NULL, "aemif", &aemif_clk),
373 CLK(NULL, "pwm0", &pwm0_clk),
374 CLK(NULL, "pwm1", &pwm1_clk),
375 CLK(NULL, "pwm2", &pwm2_clk),
376 CLK(NULL, "pwm3", &pwm3_clk),
377 CLK(NULL, "timer0", &timer0_clk),
378 CLK(NULL, "timer1", &timer1_clk),
379 CLK("davinci-wdt", NULL, &timer2_clk),
380 CLK(NULL, "timer3", &timer3_clk),
381 CLK(NULL, "rto", &rto_clk),
382 CLK(NULL, "usb", &usb_clk),
383 CLK(NULL, NULL, NULL),
386 /*----------------------------------------------------------------------*/
388 static u64 dm355_spi0_dma_mask = DMA_BIT_MASK(32);
390 static struct resource dm355_spi0_resources[] = {
392 .start = 0x01c66000,
393 .end = 0x01c667ff,
394 .flags = IORESOURCE_MEM,
397 .start = IRQ_DM355_SPINT0_0,
398 .flags = IORESOURCE_IRQ,
401 .start = 17,
402 .flags = IORESOURCE_DMA,
405 .start = 16,
406 .flags = IORESOURCE_DMA,
410 static struct davinci_spi_platform_data dm355_spi0_pdata = {
411 .version = SPI_VERSION_1,
412 .num_chipselect = 2,
413 .cshold_bug = true,
414 .dma_event_q = EVENTQ_1,
415 .prescaler_limit = 1,
417 static struct platform_device dm355_spi0_device = {
418 .name = "spi_davinci",
419 .id = 0,
420 .dev = {
421 .dma_mask = &dm355_spi0_dma_mask,
422 .coherent_dma_mask = DMA_BIT_MASK(32),
423 .platform_data = &dm355_spi0_pdata,
425 .num_resources = ARRAY_SIZE(dm355_spi0_resources),
426 .resource = dm355_spi0_resources,
429 void __init dm355_init_spi0(unsigned chipselect_mask,
430 const struct spi_board_info *info, unsigned len)
432 /* for now, assume we need MISO */
433 davinci_cfg_reg(DM355_SPI0_SDI);
435 /* not all slaves will be wired up */
436 if (chipselect_mask & BIT(0))
437 davinci_cfg_reg(DM355_SPI0_SDENA0);
438 if (chipselect_mask & BIT(1))
439 davinci_cfg_reg(DM355_SPI0_SDENA1);
441 spi_register_board_info(info, len);
443 platform_device_register(&dm355_spi0_device);
446 /*----------------------------------------------------------------------*/
448 #define INTMUX 0x18
449 #define EVTMUX 0x1c
452 * Device specific mux setup
454 * soc description mux mode mode mux dbg
455 * reg offset mask mode
457 static const struct mux_config dm355_pins[] = {
458 #ifdef CONFIG_DAVINCI_MUX
459 MUX_CFG(DM355, MMCSD0, 4, 2, 1, 0, false)
461 MUX_CFG(DM355, SD1_CLK, 3, 6, 1, 1, false)
462 MUX_CFG(DM355, SD1_CMD, 3, 7, 1, 1, false)
463 MUX_CFG(DM355, SD1_DATA3, 3, 8, 3, 1, false)
464 MUX_CFG(DM355, SD1_DATA2, 3, 10, 3, 1, false)
465 MUX_CFG(DM355, SD1_DATA1, 3, 12, 3, 1, false)
466 MUX_CFG(DM355, SD1_DATA0, 3, 14, 3, 1, false)
468 MUX_CFG(DM355, I2C_SDA, 3, 19, 1, 1, false)
469 MUX_CFG(DM355, I2C_SCL, 3, 20, 1, 1, false)
471 MUX_CFG(DM355, MCBSP0_BDX, 3, 0, 1, 1, false)
472 MUX_CFG(DM355, MCBSP0_X, 3, 1, 1, 1, false)
473 MUX_CFG(DM355, MCBSP0_BFSX, 3, 2, 1, 1, false)
474 MUX_CFG(DM355, MCBSP0_BDR, 3, 3, 1, 1, false)
475 MUX_CFG(DM355, MCBSP0_R, 3, 4, 1, 1, false)
476 MUX_CFG(DM355, MCBSP0_BFSR, 3, 5, 1, 1, false)
478 MUX_CFG(DM355, SPI0_SDI, 4, 1, 1, 0, false)
479 MUX_CFG(DM355, SPI0_SDENA0, 4, 0, 1, 0, false)
480 MUX_CFG(DM355, SPI0_SDENA1, 3, 28, 1, 1, false)
482 INT_CFG(DM355, INT_EDMA_CC, 2, 1, 1, false)
483 INT_CFG(DM355, INT_EDMA_TC0_ERR, 3, 1, 1, false)
484 INT_CFG(DM355, INT_EDMA_TC1_ERR, 4, 1, 1, false)
486 EVT_CFG(DM355, EVT8_ASP1_TX, 0, 1, 0, false)
487 EVT_CFG(DM355, EVT9_ASP1_RX, 1, 1, 0, false)
488 EVT_CFG(DM355, EVT26_MMC0_RX, 2, 1, 0, false)
490 MUX_CFG(DM355, VOUT_FIELD, 1, 18, 3, 1, false)
491 MUX_CFG(DM355, VOUT_FIELD_G70, 1, 18, 3, 0, false)
492 MUX_CFG(DM355, VOUT_HVSYNC, 1, 16, 1, 0, false)
493 MUX_CFG(DM355, VOUT_COUTL_EN, 1, 0, 0xff, 0x55, false)
494 MUX_CFG(DM355, VOUT_COUTH_EN, 1, 8, 0xff, 0x55, false)
496 MUX_CFG(DM355, VIN_PCLK, 0, 14, 1, 1, false)
497 MUX_CFG(DM355, VIN_CAM_WEN, 0, 13, 1, 1, false)
498 MUX_CFG(DM355, VIN_CAM_VD, 0, 12, 1, 1, false)
499 MUX_CFG(DM355, VIN_CAM_HD, 0, 11, 1, 1, false)
500 MUX_CFG(DM355, VIN_YIN_EN, 0, 10, 1, 1, false)
501 MUX_CFG(DM355, VIN_CINL_EN, 0, 0, 0xff, 0x55, false)
502 MUX_CFG(DM355, VIN_CINH_EN, 0, 8, 3, 3, false)
503 #endif
506 static u8 dm355_default_priorities[DAVINCI_N_AINTC_IRQ] = {
507 [IRQ_DM355_CCDC_VDINT0] = 2,
508 [IRQ_DM355_CCDC_VDINT1] = 6,
509 [IRQ_DM355_CCDC_VDINT2] = 6,
510 [IRQ_DM355_IPIPE_HST] = 6,
511 [IRQ_DM355_H3AINT] = 6,
512 [IRQ_DM355_IPIPE_SDR] = 6,
513 [IRQ_DM355_IPIPEIFINT] = 6,
514 [IRQ_DM355_OSDINT] = 7,
515 [IRQ_DM355_VENCINT] = 6,
516 [IRQ_ASQINT] = 6,
517 [IRQ_IMXINT] = 6,
518 [IRQ_USBINT] = 4,
519 [IRQ_DM355_RTOINT] = 4,
520 [IRQ_DM355_UARTINT2] = 7,
521 [IRQ_DM355_TINT6] = 7,
522 [IRQ_CCINT0] = 5, /* dma */
523 [IRQ_CCERRINT] = 5, /* dma */
524 [IRQ_TCERRINT0] = 5, /* dma */
525 [IRQ_TCERRINT] = 5, /* dma */
526 [IRQ_DM355_SPINT2_1] = 7,
527 [IRQ_DM355_TINT7] = 4,
528 [IRQ_DM355_SDIOINT0] = 7,
529 [IRQ_MBXINT] = 7,
530 [IRQ_MBRINT] = 7,
531 [IRQ_MMCINT] = 7,
532 [IRQ_DM355_MMCINT1] = 7,
533 [IRQ_DM355_PWMINT3] = 7,
534 [IRQ_DDRINT] = 7,
535 [IRQ_AEMIFINT] = 7,
536 [IRQ_DM355_SDIOINT1] = 4,
537 [IRQ_TINT0_TINT12] = 2, /* clockevent */
538 [IRQ_TINT0_TINT34] = 2, /* clocksource */
539 [IRQ_TINT1_TINT12] = 7, /* DSP timer */
540 [IRQ_TINT1_TINT34] = 7, /* system tick */
541 [IRQ_PWMINT0] = 7,
542 [IRQ_PWMINT1] = 7,
543 [IRQ_PWMINT2] = 7,
544 [IRQ_I2C] = 3,
545 [IRQ_UARTINT0] = 3,
546 [IRQ_UARTINT1] = 3,
547 [IRQ_DM355_SPINT0_0] = 3,
548 [IRQ_DM355_SPINT0_1] = 3,
549 [IRQ_DM355_GPIO0] = 3,
550 [IRQ_DM355_GPIO1] = 7,
551 [IRQ_DM355_GPIO2] = 4,
552 [IRQ_DM355_GPIO3] = 4,
553 [IRQ_DM355_GPIO4] = 7,
554 [IRQ_DM355_GPIO5] = 7,
555 [IRQ_DM355_GPIO6] = 7,
556 [IRQ_DM355_GPIO7] = 7,
557 [IRQ_DM355_GPIO8] = 7,
558 [IRQ_DM355_GPIO9] = 7,
559 [IRQ_DM355_GPIOBNK0] = 7,
560 [IRQ_DM355_GPIOBNK1] = 7,
561 [IRQ_DM355_GPIOBNK2] = 7,
562 [IRQ_DM355_GPIOBNK3] = 7,
563 [IRQ_DM355_GPIOBNK4] = 7,
564 [IRQ_DM355_GPIOBNK5] = 7,
565 [IRQ_DM355_GPIOBNK6] = 7,
566 [IRQ_COMMTX] = 7,
567 [IRQ_COMMRX] = 7,
568 [IRQ_EMUINT] = 7,
571 /*----------------------------------------------------------------------*/
573 static s8 queue_priority_mapping[][2] = {
574 /* {event queue no, Priority} */
575 {0, 3},
576 {1, 7},
577 {-1, -1},
580 static const struct dma_slave_map dm355_edma_map[] = {
581 { "davinci-mcbsp.0", "tx", EDMA_FILTER_PARAM(0, 2) },
582 { "davinci-mcbsp.0", "rx", EDMA_FILTER_PARAM(0, 3) },
583 { "davinci-mcbsp.1", "tx", EDMA_FILTER_PARAM(0, 8) },
584 { "davinci-mcbsp.1", "rx", EDMA_FILTER_PARAM(0, 9) },
585 { "spi_davinci.2", "tx", EDMA_FILTER_PARAM(0, 10) },
586 { "spi_davinci.2", "rx", EDMA_FILTER_PARAM(0, 11) },
587 { "spi_davinci.1", "tx", EDMA_FILTER_PARAM(0, 14) },
588 { "spi_davinci.1", "rx", EDMA_FILTER_PARAM(0, 15) },
589 { "spi_davinci.0", "tx", EDMA_FILTER_PARAM(0, 16) },
590 { "spi_davinci.0", "rx", EDMA_FILTER_PARAM(0, 17) },
591 { "dm6441-mmc.0", "rx", EDMA_FILTER_PARAM(0, 26) },
592 { "dm6441-mmc.0", "tx", EDMA_FILTER_PARAM(0, 27) },
593 { "dm6441-mmc.1", "rx", EDMA_FILTER_PARAM(0, 30) },
594 { "dm6441-mmc.1", "tx", EDMA_FILTER_PARAM(0, 31) },
597 static struct edma_soc_info dm355_edma_pdata = {
598 .queue_priority_mapping = queue_priority_mapping,
599 .default_queue = EVENTQ_1,
600 .slave_map = dm355_edma_map,
601 .slavecnt = ARRAY_SIZE(dm355_edma_map),
604 static struct resource edma_resources[] = {
606 .name = "edma3_cc",
607 .start = 0x01c00000,
608 .end = 0x01c00000 + SZ_64K - 1,
609 .flags = IORESOURCE_MEM,
612 .name = "edma3_tc0",
613 .start = 0x01c10000,
614 .end = 0x01c10000 + SZ_1K - 1,
615 .flags = IORESOURCE_MEM,
618 .name = "edma3_tc1",
619 .start = 0x01c10400,
620 .end = 0x01c10400 + SZ_1K - 1,
621 .flags = IORESOURCE_MEM,
624 .name = "edma3_ccint",
625 .start = IRQ_CCINT0,
626 .flags = IORESOURCE_IRQ,
629 .name = "edma3_ccerrint",
630 .start = IRQ_CCERRINT,
631 .flags = IORESOURCE_IRQ,
633 /* not using (or muxing) TC*_ERR */
636 static const struct platform_device_info dm355_edma_device __initconst = {
637 .name = "edma",
638 .id = 0,
639 .dma_mask = DMA_BIT_MASK(32),
640 .res = edma_resources,
641 .num_res = ARRAY_SIZE(edma_resources),
642 .data = &dm355_edma_pdata,
643 .size_data = sizeof(dm355_edma_pdata),
646 static struct resource dm355_asp1_resources[] = {
648 .name = "mpu",
649 .start = DAVINCI_ASP1_BASE,
650 .end = DAVINCI_ASP1_BASE + SZ_8K - 1,
651 .flags = IORESOURCE_MEM,
654 .start = DAVINCI_DMA_ASP1_TX,
655 .end = DAVINCI_DMA_ASP1_TX,
656 .flags = IORESOURCE_DMA,
659 .start = DAVINCI_DMA_ASP1_RX,
660 .end = DAVINCI_DMA_ASP1_RX,
661 .flags = IORESOURCE_DMA,
665 static struct platform_device dm355_asp1_device = {
666 .name = "davinci-mcbsp",
667 .id = 1,
668 .num_resources = ARRAY_SIZE(dm355_asp1_resources),
669 .resource = dm355_asp1_resources,
672 static void dm355_ccdc_setup_pinmux(void)
674 davinci_cfg_reg(DM355_VIN_PCLK);
675 davinci_cfg_reg(DM355_VIN_CAM_WEN);
676 davinci_cfg_reg(DM355_VIN_CAM_VD);
677 davinci_cfg_reg(DM355_VIN_CAM_HD);
678 davinci_cfg_reg(DM355_VIN_YIN_EN);
679 davinci_cfg_reg(DM355_VIN_CINL_EN);
680 davinci_cfg_reg(DM355_VIN_CINH_EN);
683 static struct resource dm355_vpss_resources[] = {
685 /* VPSS BL Base address */
686 .name = "vpss",
687 .start = 0x01c70800,
688 .end = 0x01c70800 + 0xff,
689 .flags = IORESOURCE_MEM,
692 /* VPSS CLK Base address */
693 .name = "vpss",
694 .start = 0x01c70000,
695 .end = 0x01c70000 + 0xf,
696 .flags = IORESOURCE_MEM,
700 static struct platform_device dm355_vpss_device = {
701 .name = "vpss",
702 .id = -1,
703 .dev.platform_data = "dm355_vpss",
704 .num_resources = ARRAY_SIZE(dm355_vpss_resources),
705 .resource = dm355_vpss_resources,
708 static struct resource vpfe_resources[] = {
710 .start = IRQ_VDINT0,
711 .end = IRQ_VDINT0,
712 .flags = IORESOURCE_IRQ,
715 .start = IRQ_VDINT1,
716 .end = IRQ_VDINT1,
717 .flags = IORESOURCE_IRQ,
721 static u64 vpfe_capture_dma_mask = DMA_BIT_MASK(32);
722 static struct resource dm355_ccdc_resource[] = {
723 /* CCDC Base address */
725 .flags = IORESOURCE_MEM,
726 .start = 0x01c70600,
727 .end = 0x01c70600 + 0x1ff,
730 static struct platform_device dm355_ccdc_dev = {
731 .name = "dm355_ccdc",
732 .id = -1,
733 .num_resources = ARRAY_SIZE(dm355_ccdc_resource),
734 .resource = dm355_ccdc_resource,
735 .dev = {
736 .dma_mask = &vpfe_capture_dma_mask,
737 .coherent_dma_mask = DMA_BIT_MASK(32),
738 .platform_data = dm355_ccdc_setup_pinmux,
742 static struct platform_device vpfe_capture_dev = {
743 .name = CAPTURE_DRV_NAME,
744 .id = -1,
745 .num_resources = ARRAY_SIZE(vpfe_resources),
746 .resource = vpfe_resources,
747 .dev = {
748 .dma_mask = &vpfe_capture_dma_mask,
749 .coherent_dma_mask = DMA_BIT_MASK(32),
753 static struct resource dm355_osd_resources[] = {
755 .start = DM355_OSD_BASE,
756 .end = DM355_OSD_BASE + 0x17f,
757 .flags = IORESOURCE_MEM,
761 static struct platform_device dm355_osd_dev = {
762 .name = DM355_VPBE_OSD_SUBDEV_NAME,
763 .id = -1,
764 .num_resources = ARRAY_SIZE(dm355_osd_resources),
765 .resource = dm355_osd_resources,
766 .dev = {
767 .dma_mask = &vpfe_capture_dma_mask,
768 .coherent_dma_mask = DMA_BIT_MASK(32),
772 static struct resource dm355_venc_resources[] = {
774 .start = IRQ_VENCINT,
775 .end = IRQ_VENCINT,
776 .flags = IORESOURCE_IRQ,
778 /* venc registers io space */
780 .start = DM355_VENC_BASE,
781 .end = DM355_VENC_BASE + 0x17f,
782 .flags = IORESOURCE_MEM,
784 /* VDAC config register io space */
786 .start = DAVINCI_SYSTEM_MODULE_BASE + SYSMOD_VDAC_CONFIG,
787 .end = DAVINCI_SYSTEM_MODULE_BASE + SYSMOD_VDAC_CONFIG + 3,
788 .flags = IORESOURCE_MEM,
792 static struct resource dm355_v4l2_disp_resources[] = {
794 .start = IRQ_VENCINT,
795 .end = IRQ_VENCINT,
796 .flags = IORESOURCE_IRQ,
798 /* venc registers io space */
800 .start = DM355_VENC_BASE,
801 .end = DM355_VENC_BASE + 0x17f,
802 .flags = IORESOURCE_MEM,
806 static int dm355_vpbe_setup_pinmux(u32 if_type, int field)
808 switch (if_type) {
809 case MEDIA_BUS_FMT_SGRBG8_1X8:
810 davinci_cfg_reg(DM355_VOUT_FIELD_G70);
811 break;
812 case MEDIA_BUS_FMT_YUYV10_1X20:
813 if (field)
814 davinci_cfg_reg(DM355_VOUT_FIELD);
815 else
816 davinci_cfg_reg(DM355_VOUT_FIELD_G70);
817 break;
818 default:
819 return -EINVAL;
822 davinci_cfg_reg(DM355_VOUT_COUTL_EN);
823 davinci_cfg_reg(DM355_VOUT_COUTH_EN);
825 return 0;
828 static int dm355_venc_setup_clock(enum vpbe_enc_timings_type type,
829 unsigned int pclock)
831 void __iomem *vpss_clk_ctrl_reg;
833 vpss_clk_ctrl_reg = DAVINCI_SYSMOD_VIRT(SYSMOD_VPSS_CLKCTL);
835 switch (type) {
836 case VPBE_ENC_STD:
837 writel(VPSS_DACCLKEN_ENABLE | VPSS_VENCCLKEN_ENABLE,
838 vpss_clk_ctrl_reg);
839 break;
840 case VPBE_ENC_DV_TIMINGS:
841 if (pclock > 27000000)
843 * For HD, use external clock source since we cannot
844 * support HD mode with internal clocks.
846 writel(VPSS_MUXSEL_EXTCLK_ENABLE, vpss_clk_ctrl_reg);
847 break;
848 default:
849 return -EINVAL;
852 return 0;
855 static struct platform_device dm355_vpbe_display = {
856 .name = "vpbe-v4l2",
857 .id = -1,
858 .num_resources = ARRAY_SIZE(dm355_v4l2_disp_resources),
859 .resource = dm355_v4l2_disp_resources,
860 .dev = {
861 .dma_mask = &vpfe_capture_dma_mask,
862 .coherent_dma_mask = DMA_BIT_MASK(32),
866 static struct venc_platform_data dm355_venc_pdata = {
867 .setup_pinmux = dm355_vpbe_setup_pinmux,
868 .setup_clock = dm355_venc_setup_clock,
871 static struct platform_device dm355_venc_dev = {
872 .name = DM355_VPBE_VENC_SUBDEV_NAME,
873 .id = -1,
874 .num_resources = ARRAY_SIZE(dm355_venc_resources),
875 .resource = dm355_venc_resources,
876 .dev = {
877 .dma_mask = &vpfe_capture_dma_mask,
878 .coherent_dma_mask = DMA_BIT_MASK(32),
879 .platform_data = (void *)&dm355_venc_pdata,
883 static struct platform_device dm355_vpbe_dev = {
884 .name = "vpbe_controller",
885 .id = -1,
886 .dev = {
887 .dma_mask = &vpfe_capture_dma_mask,
888 .coherent_dma_mask = DMA_BIT_MASK(32),
892 static struct resource dm355_gpio_resources[] = {
893 { /* registers */
894 .start = DAVINCI_GPIO_BASE,
895 .end = DAVINCI_GPIO_BASE + SZ_4K - 1,
896 .flags = IORESOURCE_MEM,
898 { /* interrupt */
899 .start = IRQ_DM355_GPIOBNK0,
900 .end = IRQ_DM355_GPIOBNK6,
901 .flags = IORESOURCE_IRQ,
905 static struct davinci_gpio_platform_data dm355_gpio_platform_data = {
906 .ngpio = 104,
909 int __init dm355_gpio_register(void)
911 return davinci_gpio_register(dm355_gpio_resources,
912 ARRAY_SIZE(dm355_gpio_resources),
913 &dm355_gpio_platform_data);
915 /*----------------------------------------------------------------------*/
917 static struct map_desc dm355_io_desc[] = {
919 .virtual = IO_VIRT,
920 .pfn = __phys_to_pfn(IO_PHYS),
921 .length = IO_SIZE,
922 .type = MT_DEVICE
926 /* Contents of JTAG ID register used to identify exact cpu type */
927 static struct davinci_id dm355_ids[] = {
929 .variant = 0x0,
930 .part_no = 0xb73b,
931 .manufacturer = 0x00f,
932 .cpu_id = DAVINCI_CPU_ID_DM355,
933 .name = "dm355",
937 static u32 dm355_psc_bases[] = { DAVINCI_PWR_SLEEP_CNTRL_BASE };
940 * T0_BOT: Timer 0, bottom: clockevent source for hrtimers
941 * T0_TOP: Timer 0, top : clocksource for generic timekeeping
942 * T1_BOT: Timer 1, bottom: (used by DSP in TI DSPLink code)
943 * T1_TOP: Timer 1, top : <unused>
945 static struct davinci_timer_info dm355_timer_info = {
946 .timers = davinci_timer_instance,
947 .clockevent_id = T0_BOT,
948 .clocksource_id = T0_TOP,
951 static struct plat_serial8250_port dm355_serial0_platform_data[] = {
953 .mapbase = DAVINCI_UART0_BASE,
954 .irq = IRQ_UARTINT0,
955 .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
956 UPF_IOREMAP,
957 .iotype = UPIO_MEM,
958 .regshift = 2,
961 .flags = 0,
964 static struct plat_serial8250_port dm355_serial1_platform_data[] = {
966 .mapbase = DAVINCI_UART1_BASE,
967 .irq = IRQ_UARTINT1,
968 .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
969 UPF_IOREMAP,
970 .iotype = UPIO_MEM,
971 .regshift = 2,
974 .flags = 0,
977 static struct plat_serial8250_port dm355_serial2_platform_data[] = {
979 .mapbase = DM355_UART2_BASE,
980 .irq = IRQ_DM355_UARTINT2,
981 .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
982 UPF_IOREMAP,
983 .iotype = UPIO_MEM,
984 .regshift = 2,
987 .flags = 0,
991 struct platform_device dm355_serial_device[] = {
993 .name = "serial8250",
994 .id = PLAT8250_DEV_PLATFORM,
995 .dev = {
996 .platform_data = dm355_serial0_platform_data,
1000 .name = "serial8250",
1001 .id = PLAT8250_DEV_PLATFORM1,
1002 .dev = {
1003 .platform_data = dm355_serial1_platform_data,
1007 .name = "serial8250",
1008 .id = PLAT8250_DEV_PLATFORM2,
1009 .dev = {
1010 .platform_data = dm355_serial2_platform_data,
1017 static struct davinci_soc_info davinci_soc_info_dm355 = {
1018 .io_desc = dm355_io_desc,
1019 .io_desc_num = ARRAY_SIZE(dm355_io_desc),
1020 .jtag_id_reg = 0x01c40028,
1021 .ids = dm355_ids,
1022 .ids_num = ARRAY_SIZE(dm355_ids),
1023 .cpu_clks = dm355_clks,
1024 .psc_bases = dm355_psc_bases,
1025 .psc_bases_num = ARRAY_SIZE(dm355_psc_bases),
1026 .pinmux_base = DAVINCI_SYSTEM_MODULE_BASE,
1027 .pinmux_pins = dm355_pins,
1028 .pinmux_pins_num = ARRAY_SIZE(dm355_pins),
1029 .intc_base = DAVINCI_ARM_INTC_BASE,
1030 .intc_type = DAVINCI_INTC_TYPE_AINTC,
1031 .intc_irq_prios = dm355_default_priorities,
1032 .intc_irq_num = DAVINCI_N_AINTC_IRQ,
1033 .timer_info = &dm355_timer_info,
1034 .sram_dma = 0x00010000,
1035 .sram_len = SZ_32K,
1038 void __init dm355_init_asp1(u32 evt_enable, struct snd_platform_data *pdata)
1040 /* we don't use ASP1 IRQs, or we'd need to mux them ... */
1041 if (evt_enable & ASP1_TX_EVT_EN)
1042 davinci_cfg_reg(DM355_EVT8_ASP1_TX);
1044 if (evt_enable & ASP1_RX_EVT_EN)
1045 davinci_cfg_reg(DM355_EVT9_ASP1_RX);
1047 dm355_asp1_device.dev.platform_data = pdata;
1048 platform_device_register(&dm355_asp1_device);
1051 void __init dm355_init(void)
1053 davinci_common_init(&davinci_soc_info_dm355);
1054 davinci_map_sysmod();
1057 int __init dm355_init_video(struct vpfe_config *vpfe_cfg,
1058 struct vpbe_config *vpbe_cfg)
1060 if (vpfe_cfg || vpbe_cfg)
1061 platform_device_register(&dm355_vpss_device);
1063 if (vpfe_cfg) {
1064 vpfe_capture_dev.dev.platform_data = vpfe_cfg;
1065 platform_device_register(&dm355_ccdc_dev);
1066 platform_device_register(&vpfe_capture_dev);
1069 if (vpbe_cfg) {
1070 dm355_vpbe_dev.dev.platform_data = vpbe_cfg;
1071 platform_device_register(&dm355_osd_dev);
1072 platform_device_register(&dm355_venc_dev);
1073 platform_device_register(&dm355_vpbe_dev);
1074 platform_device_register(&dm355_vpbe_display);
1077 return 0;
1080 static int __init dm355_init_devices(void)
1082 struct platform_device *edma_pdev;
1083 int ret = 0;
1085 if (!cpu_is_davinci_dm355())
1086 return 0;
1088 davinci_cfg_reg(DM355_INT_EDMA_CC);
1089 edma_pdev = platform_device_register_full(&dm355_edma_device);
1090 if (IS_ERR(edma_pdev)) {
1091 pr_warn("%s: Failed to register eDMA\n", __func__);
1092 return PTR_ERR(edma_pdev);
1095 ret = davinci_init_wdt();
1096 if (ret)
1097 pr_warn("%s: watchdog init failed: %d\n", __func__, ret);
1099 return ret;
1101 postcore_initcall(dm355_init_devices);