?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
x86/boot: Rename overlapping memcpy() to memmove()
[linux/fpc-iii.git] / arch / arm / mach-integrator / pci_v3.c
blob2565f0e7b5cff9b99e84e9cf043c786f2122f044
1 /*
2 * linux/arch/arm/mach-integrator/pci_v3.c
3 *
4 * PCI functions for V3 host PCI bridge
5 *
6 * Copyright (C) 1999 ARM Limited
7 * Copyright (C) 2000-2001 Deep Blue Solutions Ltd
8 *
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License as published by
11 * the Free Software Foundation; either version 2 of the License, or
12 * (at your option) any later version.
13 *
14 * This program is distributed in the hope that it will be useful,
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 * GNU General Public License for more details.
18 *
19 * You should have received a copy of the GNU General Public License
20 * along with this program; if not, write to the Free Software
21 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
22 */
23 #include <linux/kernel.h>
24 #include <linux/pci.h>
25 #include <linux/ioport.h>
26 #include <linux/interrupt.h>
27 #include <linux/spinlock.h>
28 #include <linux/init.h>
29 #include <linux/io.h>
30 #include <linux/platform_device.h>
31 #include <linux/of.h>
32 #include <linux/of_address.h>
33 #include <linux/of_irq.h>
34 #include <linux/of_pci.h>
35 #include <video/vga.h>
36
37 #include <asm/mach/map.h>
38 #include <asm/signal.h>
39 #include <asm/mach/pci.h>
40 #include <asm/irq_regs.h>
41
42 #include "pci_v3.h"
43 #include "hardware.h"
44
45 /*
46 * Where in the memory map does PCI live?
47 *
48 * This represents a fairly liberal usage of address space. Even though
49 * the V3 only has two windows (therefore we need to map stuff on the fly),
50 * we maintain the same addresses, even if they're not mapped.
51 */
52 #define PHYS_PCI_MEM_BASE 0x40000000 /* 256M */
53 #define PHYS_PCI_PRE_BASE 0x50000000 /* 256M */
54 #define PHYS_PCI_IO_BASE 0x60000000 /* 16M */
55 #define PHYS_PCI_CONFIG_BASE 0x61000000 /* 16M */
56 #define PHYS_PCI_V3_BASE 0x62000000 /* 64K */
57
58 #define PCI_MEMORY_VADDR IOMEM(0xe8000000)
59 #define PCI_CONFIG_VADDR IOMEM(0xec000000)
60
61 /*
62 * V3 Local Bus to PCI Bridge definitions
63 *
64 * Registers (these are taken from page 129 of the EPC User's Manual Rev 1.04
65 * All V3 register names are prefaced by V3_ to avoid clashing with any other
66 * PCI definitions. Their names match the user's manual.
67 *
68 * I'm assuming that I20 is disabled.
69 *
70 */
71 #define V3_PCI_VENDOR 0x00000000
72 #define V3_PCI_DEVICE 0x00000002
73 #define V3_PCI_CMD 0x00000004
74 #define V3_PCI_STAT 0x00000006
75 #define V3_PCI_CC_REV 0x00000008
76 #define V3_PCI_HDR_CFG 0x0000000C
77 #define V3_PCI_IO_BASE 0x00000010
78 #define V3_PCI_BASE0 0x00000014
79 #define V3_PCI_BASE1 0x00000018
80 #define V3_PCI_SUB_VENDOR 0x0000002C
81 #define V3_PCI_SUB_ID 0x0000002E
82 #define V3_PCI_ROM 0x00000030
83 #define V3_PCI_BPARAM 0x0000003C
84 #define V3_PCI_MAP0 0x00000040
85 #define V3_PCI_MAP1 0x00000044
86 #define V3_PCI_INT_STAT 0x00000048
87 #define V3_PCI_INT_CFG 0x0000004C
88 #define V3_LB_BASE0 0x00000054
89 #define V3_LB_BASE1 0x00000058
90 #define V3_LB_MAP0 0x0000005E
91 #define V3_LB_MAP1 0x00000062
92 #define V3_LB_BASE2 0x00000064
93 #define V3_LB_MAP2 0x00000066
94 #define V3_LB_SIZE 0x00000068
95 #define V3_LB_IO_BASE 0x0000006E
96 #define V3_FIFO_CFG 0x00000070
97 #define V3_FIFO_PRIORITY 0x00000072
98 #define V3_FIFO_STAT 0x00000074
99 #define V3_LB_ISTAT 0x00000076
100 #define V3_LB_IMASK 0x00000077
101 #define V3_SYSTEM 0x00000078
102 #define V3_LB_CFG 0x0000007A
103 #define V3_PCI_CFG 0x0000007C
104 #define V3_DMA_PCI_ADR0 0x00000080
105 #define V3_DMA_PCI_ADR1 0x00000090
106 #define V3_DMA_LOCAL_ADR0 0x00000084
107 #define V3_DMA_LOCAL_ADR1 0x00000094
108 #define V3_DMA_LENGTH0 0x00000088
109 #define V3_DMA_LENGTH1 0x00000098
110 #define V3_DMA_CSR0 0x0000008B
111 #define V3_DMA_CSR1 0x0000009B
112 #define V3_DMA_CTLB_ADR0 0x0000008C
113 #define V3_DMA_CTLB_ADR1 0x0000009C
114 #define V3_DMA_DELAY 0x000000E0
115 #define V3_MAIL_DATA 0x000000C0
116 #define V3_PCI_MAIL_IEWR 0x000000D0
117 #define V3_PCI_MAIL_IERD 0x000000D2
118 #define V3_LB_MAIL_IEWR 0x000000D4
119 #define V3_LB_MAIL_IERD 0x000000D6
120 #define V3_MAIL_WR_STAT 0x000000D8
121 #define V3_MAIL_RD_STAT 0x000000DA
122 #define V3_QBA_MAP 0x000000DC
123
124 /* PCI COMMAND REGISTER bits
125 */
126 #define V3_COMMAND_M_FBB_EN (1 << 9)
127 #define V3_COMMAND_M_SERR_EN (1 << 8)
128 #define V3_COMMAND_M_PAR_EN (1 << 6)
129 #define V3_COMMAND_M_MASTER_EN (1 << 2)
130 #define V3_COMMAND_M_MEM_EN (1 << 1)
131 #define V3_COMMAND_M_IO_EN (1 << 0)
132
133 /* SYSTEM REGISTER bits
134 */
135 #define V3_SYSTEM_M_RST_OUT (1 << 15)
136 #define V3_SYSTEM_M_LOCK (1 << 14)
137
138 /* PCI_CFG bits
139 */
140 #define V3_PCI_CFG_M_I2O_EN (1 << 15)
141 #define V3_PCI_CFG_M_IO_REG_DIS (1 << 14)
142 #define V3_PCI_CFG_M_IO_DIS (1 << 13)
143 #define V3_PCI_CFG_M_EN3V (1 << 12)
144 #define V3_PCI_CFG_M_RETRY_EN (1 << 10)
145 #define V3_PCI_CFG_M_AD_LOW1 (1 << 9)
146 #define V3_PCI_CFG_M_AD_LOW0 (1 << 8)
147
148 /* PCI_BASE register bits (PCI -> Local Bus)
149 */
150 #define V3_PCI_BASE_M_ADR_BASE 0xFFF00000
151 #define V3_PCI_BASE_M_ADR_BASEL 0x000FFF00
152 #define V3_PCI_BASE_M_PREFETCH (1 << 3)
153 #define V3_PCI_BASE_M_TYPE (3 << 1)
154 #define V3_PCI_BASE_M_IO (1 << 0)
155
156 /* PCI MAP register bits (PCI -> Local bus)
157 */
158 #define V3_PCI_MAP_M_MAP_ADR 0xFFF00000
159 #define V3_PCI_MAP_M_RD_POST_INH (1 << 15)
160 #define V3_PCI_MAP_M_ROM_SIZE (3 << 10)
161 #define V3_PCI_MAP_M_SWAP (3 << 8)
162 #define V3_PCI_MAP_M_ADR_SIZE 0x000000F0
163 #define V3_PCI_MAP_M_REG_EN (1 << 1)
164 #define V3_PCI_MAP_M_ENABLE (1 << 0)
165
166 /*
167 * LB_BASE0,1 register bits (Local bus -> PCI)
168 */
169 #define V3_LB_BASE_ADR_BASE 0xfff00000
170 #define V3_LB_BASE_SWAP (3 << 8)
171 #define V3_LB_BASE_ADR_SIZE (15 << 4)
172 #define V3_LB_BASE_PREFETCH (1 << 3)
173 #define V3_LB_BASE_ENABLE (1 << 0)
174
175 #define V3_LB_BASE_ADR_SIZE_1MB (0 << 4)
176 #define V3_LB_BASE_ADR_SIZE_2MB (1 << 4)
177 #define V3_LB_BASE_ADR_SIZE_4MB (2 << 4)
178 #define V3_LB_BASE_ADR_SIZE_8MB (3 << 4)
179 #define V3_LB_BASE_ADR_SIZE_16MB (4 << 4)
180 #define V3_LB_BASE_ADR_SIZE_32MB (5 << 4)
181 #define V3_LB_BASE_ADR_SIZE_64MB (6 << 4)
182 #define V3_LB_BASE_ADR_SIZE_128MB (7 << 4)
183 #define V3_LB_BASE_ADR_SIZE_256MB (8 << 4)
184 #define V3_LB_BASE_ADR_SIZE_512MB (9 << 4)
185 #define V3_LB_BASE_ADR_SIZE_1GB (10 << 4)
186 #define V3_LB_BASE_ADR_SIZE_2GB (11 << 4)
187
188 #define v3_addr_to_lb_base(a) ((a) & V3_LB_BASE_ADR_BASE)
189
190 /*
191 * LB_MAP0,1 register bits (Local bus -> PCI)
192 */
193 #define V3_LB_MAP_MAP_ADR 0xfff0
194 #define V3_LB_MAP_TYPE (7 << 1)
195 #define V3_LB_MAP_AD_LOW_EN (1 << 0)
196
197 #define V3_LB_MAP_TYPE_IACK (0 << 1)
198 #define V3_LB_MAP_TYPE_IO (1 << 1)
199 #define V3_LB_MAP_TYPE_MEM (3 << 1)
200 #define V3_LB_MAP_TYPE_CONFIG (5 << 1)
201 #define V3_LB_MAP_TYPE_MEM_MULTIPLE (6 << 1)
202
203 #define v3_addr_to_lb_map(a) (((a) >> 16) & V3_LB_MAP_MAP_ADR)
204
205 /*
206 * LB_BASE2 register bits (Local bus -> PCI IO)
207 */
208 #define V3_LB_BASE2_ADR_BASE 0xff00
209 #define V3_LB_BASE2_SWAP (3 << 6)
210 #define V3_LB_BASE2_ENABLE (1 << 0)
211
212 #define v3_addr_to_lb_base2(a) (((a) >> 16) & V3_LB_BASE2_ADR_BASE)
213
214 /*
215 * LB_MAP2 register bits (Local bus -> PCI IO)
216 */
217 #define V3_LB_MAP2_MAP_ADR 0xff00
218
219 #define v3_addr_to_lb_map2(a) (((a) >> 16) & V3_LB_MAP2_MAP_ADR)
220
221 /*
222 * The V3 PCI interface chip in Integrator provides several windows from
223 * local bus memory into the PCI memory areas. Unfortunately, there
224 * are not really enough windows for our usage, therefore we reuse
225 * one of the windows for access to PCI configuration space. The
226 * memory map is as follows:
227 *
228 * Local Bus Memory Usage
229 *
230 * 40000000 - 4FFFFFFF PCI memory. 256M non-prefetchable
231 * 50000000 - 5FFFFFFF PCI memory. 256M prefetchable
232 * 60000000 - 60FFFFFF PCI IO. 16M
233 * 61000000 - 61FFFFFF PCI Configuration. 16M
234 *
235 * There are three V3 windows, each described by a pair of V3 registers.
236 * These are LB_BASE0/LB_MAP0, LB_BASE1/LB_MAP1 and LB_BASE2/LB_MAP2.
237 * Base0 and Base1 can be used for any type of PCI memory access. Base2
238 * can be used either for PCI I/O or for I20 accesses. By default, uHAL
239 * uses this only for PCI IO space.
240 *
241 * Normally these spaces are mapped using the following base registers:
242 *
243 * Usage Local Bus Memory Base/Map registers used
244 *
245 * Mem 40000000 - 4FFFFFFF LB_BASE0/LB_MAP0
246 * Mem 50000000 - 5FFFFFFF LB_BASE1/LB_MAP1
247 * IO 60000000 - 60FFFFFF LB_BASE2/LB_MAP2
248 * Cfg 61000000 - 61FFFFFF
249 *
250 * This means that I20 and PCI configuration space accesses will fail.
251 * When PCI configuration accesses are needed (via the uHAL PCI
252 * configuration space primitives) we must remap the spaces as follows:
253 *
254 * Usage Local Bus Memory Base/Map registers used
255 *
256 * Mem 40000000 - 4FFFFFFF LB_BASE0/LB_MAP0
257 * Mem 50000000 - 5FFFFFFF LB_BASE0/LB_MAP0
258 * IO 60000000 - 60FFFFFF LB_BASE2/LB_MAP2
259 * Cfg 61000000 - 61FFFFFF LB_BASE1/LB_MAP1
260 *
261 * To make this work, the code depends on overlapping windows working.
262 * The V3 chip translates an address by checking its range within
263 * each of the BASE/MAP pairs in turn (in ascending register number
264 * order). It will use the first matching pair. So, for example,
265 * if the same address is mapped by both LB_BASE0/LB_MAP0 and
266 * LB_BASE1/LB_MAP1, the V3 will use the translation from
267 * LB_BASE0/LB_MAP0.
268 *
269 * To allow PCI Configuration space access, the code enlarges the
270 * window mapped by LB_BASE0/LB_MAP0 from 256M to 512M. This occludes
271 * the windows currently mapped by LB_BASE1/LB_MAP1 so that it can
272 * be remapped for use by configuration cycles.
273 *
274 * At the end of the PCI Configuration space accesses,
275 * LB_BASE1/LB_MAP1 is reset to map PCI Memory. Finally the window
276 * mapped by LB_BASE0/LB_MAP0 is reduced in size from 512M to 256M to
277 * reveal the now restored LB_BASE1/LB_MAP1 window.
278 *
279 * NOTE: We do not set up I2O mapping. I suspect that this is only
280 * for an intelligent (target) device. Using I2O disables most of
281 * the mappings into PCI memory.
282 */
283
284 /* Filled in by probe */
285 static void __iomem *pci_v3_base;
286 /* CPU side memory ranges */
287 static struct resource conf_mem; /* FIXME: remap this instead of static map */
288 static struct resource io_mem;
289 static struct resource non_mem;
290 static struct resource pre_mem;
291 /* PCI side memory ranges */
292 static u64 non_mem_pci;
293 static u64 non_mem_pci_sz;
294 static u64 pre_mem_pci;
295 static u64 pre_mem_pci_sz;
296
297 // V3 access routines
298 #define v3_writeb(o,v) __raw_writeb(v, pci_v3_base + (unsigned int)(o))
299 #define v3_readb(o) (__raw_readb(pci_v3_base + (unsigned int)(o)))
300
301 #define v3_writew(o,v) __raw_writew(v, pci_v3_base + (unsigned int)(o))
302 #define v3_readw(o) (__raw_readw(pci_v3_base + (unsigned int)(o)))
303
304 #define v3_writel(o,v) __raw_writel(v, pci_v3_base + (unsigned int)(o))
305 #define v3_readl(o) (__raw_readl(pci_v3_base + (unsigned int)(o)))
306
307 /*============================================================================
308 *
309 * routine: uHALir_PCIMakeConfigAddress()
310 *
311 * parameters: bus = which bus
312 * device = which device
313 * function = which function
314 * offset = configuration space register we are interested in
315 *
316 * description: this routine will generate a platform dependent config
317 * address.
318 *
319 * calls: none
320 *
321 * returns: configuration address to play on the PCI bus
322 *
323 * To generate the appropriate PCI configuration cycles in the PCI
324 * configuration address space, you present the V3 with the following pattern
325 * (which is very nearly a type 1 (except that the lower two bits are 00 and
326 * not 01). In order for this mapping to work you need to set up one of
327 * the local to PCI aperatures to 16Mbytes in length translating to
328 * PCI configuration space starting at 0x0000.0000.
329 *
330 * PCI configuration cycles look like this:
331 *
332 * Type 0:
333 *
334 * 3 3|3 3 2 2|2 2 2 2|2 2 2 2|1 1 1 1|1 1 1 1|1 1
335 * 3 2|1 0 9 8|7 6 5 4|3 2 1 0|9 8 7 6|5 4 3 2|1 0 9 8|7 6 5 4|3 2 1 0
336 * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
337 * | | |D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|F|F|F|R|R|R|R|R|R|0|0|
338 * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
339 *
340 * 31:11 Device select bit.
341 * 10:8 Function number
342 * 7:2 Register number
343 *
344 * Type 1:
345 *
346 * 3 3|3 3 2 2|2 2 2 2|2 2 2 2|1 1 1 1|1 1 1 1|1 1
347 * 3 2|1 0 9 8|7 6 5 4|3 2 1 0|9 8 7 6|5 4 3 2|1 0 9 8|7 6 5 4|3 2 1 0
348 * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
349 * | | | | | | | | | | |B|B|B|B|B|B|B|B|D|D|D|D|D|F|F|F|R|R|R|R|R|R|0|1|
350 * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
351 *
352 * 31:24 reserved
353 * 23:16 bus number (8 bits = 128 possible buses)
354 * 15:11 Device number (5 bits)
355 * 10:8 function number
356 * 7:2 register number
357 *
358 */
359
360 #undef V3_LB_BASE_PREFETCH
361 #define V3_LB_BASE_PREFETCH 0
362
363 static void __iomem *v3_open_config_window(struct pci_bus *bus,
364 unsigned int devfn, int offset)
365 {
366 unsigned int address, mapaddress, busnr;
367
368 busnr = bus->number;
369
370 /*
371 * Trap out illegal values
372 */
373 BUG_ON(offset > 255);
374 BUG_ON(busnr > 255);
375 BUG_ON(devfn > 255);
376
377 if (busnr == 0) {
378 int slot = PCI_SLOT(devfn);
379
380 /*
381 * local bus segment so need a type 0 config cycle
382 *
383 * build the PCI configuration "address" with one-hot in
384 * A31-A11
385 *
386 * mapaddress:
387 * 3:1 = config cycle (101)
388 * 0 = PCI A1 & A0 are 0 (0)
389 */
390 address = PCI_FUNC(devfn) << 8;
391 mapaddress = V3_LB_MAP_TYPE_CONFIG;
392
393 if (slot > 12)
394 /*
395 * high order bits are handled by the MAP register
396 */
397 mapaddress |= 1 << (slot - 5);
398 else
399 /*
400 * low order bits handled directly in the address
401 */
402 address |= 1 << (slot + 11);
403 } else {
404 /*
405 * not the local bus segment so need a type 1 config cycle
406 *
407 * address:
408 * 23:16 = bus number
409 * 15:11 = slot number (7:3 of devfn)
410 * 10:8 = func number (2:0 of devfn)
411 *
412 * mapaddress:
413 * 3:1 = config cycle (101)
414 * 0 = PCI A1 & A0 from host bus (1)
415 */
416 mapaddress = V3_LB_MAP_TYPE_CONFIG | V3_LB_MAP_AD_LOW_EN;
417 address = (busnr << 16) | (devfn << 8);
418 }
419
420 /*
421 * Set up base0 to see all 512Mbytes of memory space (not
422 * prefetchable), this frees up base1 for re-use by
423 * configuration memory
424 */
425 v3_writel(V3_LB_BASE0, v3_addr_to_lb_base(non_mem.start) |
426 V3_LB_BASE_ADR_SIZE_512MB | V3_LB_BASE_ENABLE);
427
428 /*
429 * Set up base1/map1 to point into configuration space.
430 */
431 v3_writel(V3_LB_BASE1, v3_addr_to_lb_base(conf_mem.start) |
432 V3_LB_BASE_ADR_SIZE_16MB | V3_LB_BASE_ENABLE);
433 v3_writew(V3_LB_MAP1, mapaddress);
434
435 return PCI_CONFIG_VADDR + address + offset;
436 }
437
438 static void v3_close_config_window(void)
439 {
440 /*
441 * Reassign base1 for use by prefetchable PCI memory
442 */
443 v3_writel(V3_LB_BASE1, v3_addr_to_lb_base(pre_mem.start) |
444 V3_LB_BASE_ADR_SIZE_256MB | V3_LB_BASE_PREFETCH |
445 V3_LB_BASE_ENABLE);
446 v3_writew(V3_LB_MAP1, v3_addr_to_lb_map(pre_mem_pci) |
447 V3_LB_MAP_TYPE_MEM_MULTIPLE);
448
449 /*
450 * And shrink base0 back to a 256M window (NOTE: MAP0 already correct)
451 */
452 v3_writel(V3_LB_BASE0, v3_addr_to_lb_base(non_mem.start) |
453 V3_LB_BASE_ADR_SIZE_256MB | V3_LB_BASE_ENABLE);
454 }
455
456 static int v3_read_config(struct pci_bus *bus, unsigned int devfn, int where,
457 int size, u32 *val)
458 {
459 int ret = pci_generic_config_read(bus, devfn, where, size, val);
460 v3_close_config_window();
461 return ret;
462 }
463
464 static int v3_write_config(struct pci_bus *bus, unsigned int devfn, int where,
465 int size, u32 val)
466 {
467 int ret = pci_generic_config_write(bus, devfn, where, size, val);
468 v3_close_config_window();
469 return ret;
470 }
471
472 static struct pci_ops pci_v3_ops = {
473 .map_bus = v3_open_config_window,
474 .read = v3_read_config,
475 .write = v3_write_config,
476 };
477
478 static int __init pci_v3_setup_resources(struct pci_sys_data *sys)
479 {
480 if (request_resource(&iomem_resource, &non_mem)) {
481 printk(KERN_ERR "PCI: unable to allocate non-prefetchable "
482 "memory region\n");
483 return -EBUSY;
484 }
485 if (request_resource(&iomem_resource, &pre_mem)) {
486 release_resource(&non_mem);
487 printk(KERN_ERR "PCI: unable to allocate prefetchable "
488 "memory region\n");
489 return -EBUSY;
490 }
491
492 /*
493 * the mem resource for this bus
494 * the prefetch mem resource for this bus
495 */
496 pci_add_resource_offset(&sys->resources, &non_mem, sys->mem_offset);
497 pci_add_resource_offset(&sys->resources, &pre_mem, sys->mem_offset);
498
499 return 1;
500 }
501
502 /*
503 * These don't seem to be implemented on the Integrator I have, which
504 * means I can't get additional information on the reason for the pm2fb
505 * problems. I suppose I'll just have to mind-meld with the machine. ;)
506 */
507 static void __iomem *ap_syscon_base;
508 #define INTEGRATOR_SC_PCIENABLE_OFFSET 0x18
509 #define INTEGRATOR_SC_LBFADDR_OFFSET 0x20
510 #define INTEGRATOR_SC_LBFCODE_OFFSET 0x24
511
512 static int
513 v3_pci_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
514 {
515 unsigned long pc = instruction_pointer(regs);
516 unsigned long instr = *(unsigned long *)pc;
517 #if 0
518 char buf[128];
519
520 sprintf(buf, "V3 fault: addr 0x%08lx, FSR 0x%03x, PC 0x%08lx [%08lx] LBFADDR=%08x LBFCODE=%02x ISTAT=%02x\n",
521 addr, fsr, pc, instr, __raw_readl(ap_syscon_base + INTEGRATOR_SC_LBFADDR_OFFSET), __raw_readl(ap_syscon_base + INTEGRATOR_SC_LBFCODE_OFFSET) & 255,
522 v3_readb(V3_LB_ISTAT));
523 printk(KERN_DEBUG "%s", buf);
524 #endif
525
526 v3_writeb(V3_LB_ISTAT, 0);
527 __raw_writel(3, ap_syscon_base + INTEGRATOR_SC_PCIENABLE_OFFSET);
528
529 /*
530 * If the instruction being executed was a read,
531 * make it look like it read all-ones.
532 */
533 if ((instr & 0x0c100000) == 0x04100000) {
534 int reg = (instr >> 12) & 15;
535 unsigned long val;
536
537 if (instr & 0x00400000)
538 val = 255;
539 else
540 val = -1;
541
542 regs->uregs[reg] = val;
543 regs->ARM_pc += 4;
544 return 0;
545 }
546
547 if ((instr & 0x0e100090) == 0x00100090) {
548 int reg = (instr >> 12) & 15;
549
550 regs->uregs[reg] = -1;
551 regs->ARM_pc += 4;
552 return 0;
553 }
554
555 return 1;
556 }
557
558 static irqreturn_t v3_irq(int irq, void *devid)
559 {
560 #ifdef CONFIG_DEBUG_LL
561 struct pt_regs *regs = get_irq_regs();
562 unsigned long pc = instruction_pointer(regs);
563 unsigned long instr = *(unsigned long *)pc;
564 char buf[128];
565 extern void printascii(const char *);
566
567 sprintf(buf, "V3 int %d: pc=0x%08lx [%08lx] LBFADDR=%08x LBFCODE=%02x "
568 "ISTAT=%02x\n", irq, pc, instr,
569 __raw_readl(ap_syscon_base + INTEGRATOR_SC_LBFADDR_OFFSET),
570 __raw_readl(ap_syscon_base + INTEGRATOR_SC_LBFCODE_OFFSET) & 255,
571 v3_readb(V3_LB_ISTAT));
572 printascii(buf);
573 #endif
574
575 v3_writew(V3_PCI_STAT, 0xf000);
576 v3_writeb(V3_LB_ISTAT, 0);
577 __raw_writel(3, ap_syscon_base + INTEGRATOR_SC_PCIENABLE_OFFSET);
578
579 #ifdef CONFIG_DEBUG_LL
580 /*
581 * If the instruction being executed was a read,
582 * make it look like it read all-ones.
583 */
584 if ((instr & 0x0c100000) == 0x04100000) {
585 int reg = (instr >> 16) & 15;
586 sprintf(buf, " reg%d = %08lx\n", reg, regs->uregs[reg]);
587 printascii(buf);
588 }
589 #endif
590 return IRQ_HANDLED;
591 }
592
593 static int __init pci_v3_setup(int nr, struct pci_sys_data *sys)
594 {
595 int ret = 0;
596
597 if (!ap_syscon_base)
598 return -EINVAL;
599
600 if (nr == 0) {
601 sys->mem_offset = non_mem.start;
602 ret = pci_v3_setup_resources(sys);
603 }
604
605 return ret;
606 }
607
608 /*
609 * V3_LB_BASE? - local bus address
610 * V3_LB_MAP? - pci bus address
611 */
612 static void __init pci_v3_preinit(void)
613 {
614 unsigned int temp;
615 phys_addr_t io_address = pci_pio_to_address(io_mem.start);
616
617 pcibios_min_mem = 0x00100000;
618
619 /*
620 * Hook in our fault handler for PCI errors
621 */
622 hook_fault_code(4, v3_pci_fault, SIGBUS, 0, "external abort on linefetch");
623 hook_fault_code(6, v3_pci_fault, SIGBUS, 0, "external abort on linefetch");
624 hook_fault_code(8, v3_pci_fault, SIGBUS, 0, "external abort on non-linefetch");
625 hook_fault_code(10, v3_pci_fault, SIGBUS, 0, "external abort on non-linefetch");
626
627 /*
628 * Unlock V3 registers, but only if they were previously locked.
629 */
630 if (v3_readw(V3_SYSTEM) & V3_SYSTEM_M_LOCK)
631 v3_writew(V3_SYSTEM, 0xa05f);
632
633 /*
634 * Setup window 0 - PCI non-prefetchable memory
635 * Local: 0x40000000 Bus: 0x00000000 Size: 256MB
636 */
637 v3_writel(V3_LB_BASE0, v3_addr_to_lb_base(non_mem.start) |
638 V3_LB_BASE_ADR_SIZE_256MB | V3_LB_BASE_ENABLE);
639 v3_writew(V3_LB_MAP0, v3_addr_to_lb_map(non_mem_pci) |
640 V3_LB_MAP_TYPE_MEM);
641
642 /*
643 * Setup window 1 - PCI prefetchable memory
644 * Local: 0x50000000 Bus: 0x10000000 Size: 256MB
645 */
646 v3_writel(V3_LB_BASE1, v3_addr_to_lb_base(pre_mem.start) |
647 V3_LB_BASE_ADR_SIZE_256MB | V3_LB_BASE_PREFETCH |
648 V3_LB_BASE_ENABLE);
649 v3_writew(V3_LB_MAP1, v3_addr_to_lb_map(pre_mem_pci) |
650 V3_LB_MAP_TYPE_MEM_MULTIPLE);
651
652 /*
653 * Setup window 2 - PCI IO
654 */
655 v3_writel(V3_LB_BASE2, v3_addr_to_lb_base2(io_address) |
656 V3_LB_BASE_ENABLE);
657 v3_writew(V3_LB_MAP2, v3_addr_to_lb_map2(0));
658
659 /*
660 * Disable PCI to host IO cycles
661 */
662 temp = v3_readw(V3_PCI_CFG) & ~V3_PCI_CFG_M_I2O_EN;
663 temp |= V3_PCI_CFG_M_IO_REG_DIS | V3_PCI_CFG_M_IO_DIS;
664 v3_writew(V3_PCI_CFG, temp);
665
666 printk(KERN_DEBUG "FIFO_CFG: %04x FIFO_PRIO: %04x\n",
667 v3_readw(V3_FIFO_CFG), v3_readw(V3_FIFO_PRIORITY));
668
669 /*
670 * Set the V3 FIFO such that writes have higher priority than
671 * reads, and local bus write causes local bus read fifo flush.
672 * Same for PCI.
673 */
674 v3_writew(V3_FIFO_PRIORITY, 0x0a0a);
675
676 /*
677 * Re-lock the system register.
678 */
679 temp = v3_readw(V3_SYSTEM) | V3_SYSTEM_M_LOCK;
680 v3_writew(V3_SYSTEM, temp);
681
682 /*
683 * Clear any error conditions, and enable write errors.
684 */
685 v3_writeb(V3_LB_ISTAT, 0);
686 v3_writew(V3_LB_CFG, v3_readw(V3_LB_CFG) | (1 << 10));
687 v3_writeb(V3_LB_IMASK, 0x28);
688 __raw_writel(3, ap_syscon_base + INTEGRATOR_SC_PCIENABLE_OFFSET);
689 }
690
691 static void __init pci_v3_postinit(void)
692 {
693 unsigned int pci_cmd;
694 phys_addr_t io_address = pci_pio_to_address(io_mem.start);
695
696 pci_cmd = PCI_COMMAND_MEMORY |
697 PCI_COMMAND_MASTER | PCI_COMMAND_INVALIDATE;
698
699 v3_writew(V3_PCI_CMD, pci_cmd);
700
701 v3_writeb(V3_LB_ISTAT, ~0x40);
702 v3_writeb(V3_LB_IMASK, 0x68);
703
704 #if 0
705 ret = request_irq(IRQ_AP_LBUSTIMEOUT, lb_timeout, 0, "bus timeout", NULL);
706 if (ret)
707 printk(KERN_ERR "PCI: unable to grab local bus timeout "
708 "interrupt: %d\n", ret);
709 #endif
710
711 register_isa_ports(non_mem.start, io_address, 0);
712 }
713
714 /*
715 * A small note about bridges and interrupts. The DECchip 21050 (and
716 * later) adheres to the PCI-PCI bridge specification. This says that
717 * the interrupts on the other side of a bridge are swizzled in the
718 * following manner:
719 *
720 * Dev Interrupt Interrupt
721 * Pin on Pin on
722 * Device Connector
723 *
724 * 4 A A
725 * B B
726 * C C
727 * D D
728 *
729 * 5 A B
730 * B C
731 * C D
732 * D A
733 *
734 * 6 A C
735 * B D
736 * C A
737 * D B
738 *
739 * 7 A D
740 * B A
741 * C B
742 * D C
743 *
744 * Where A = pin 1, B = pin 2 and so on and pin=0 = default = A.
745 * Thus, each swizzle is ((pin-1) + (device#-4)) % 4
746 */
747
748 /*
749 * This routine handles multiple bridges.
750 */
751 static u8 __init pci_v3_swizzle(struct pci_dev *dev, u8 *pinp)
752 {
753 if (*pinp == 0)
754 *pinp = 1;
755
756 return pci_common_swizzle(dev, pinp);
757 }
758
759 static struct hw_pci pci_v3 __initdata = {
760 .swizzle = pci_v3_swizzle,
761 .setup = pci_v3_setup,
762 .nr_controllers = 1,
763 .ops = &pci_v3_ops,
764 .preinit = pci_v3_preinit,
765 .postinit = pci_v3_postinit,
766 };
767
768 static int __init pci_v3_probe(struct platform_device *pdev)
769 {
770 struct device_node *np = pdev->dev.of_node;
771 struct of_pci_range_parser parser;
772 struct of_pci_range range;
773 struct resource *res;
774 int irq, ret;
775
776 /* Remap the Integrator system controller */
777 ap_syscon_base = devm_ioremap(&pdev->dev, INTEGRATOR_SC_BASE, 0x100);
778 if (!ap_syscon_base) {
779 dev_err(&pdev->dev, "unable to remap the AP syscon for PCIv3\n");
780 return -ENODEV;
781 }
782
783 /* Device tree probe path */
784 if (!np) {
785 dev_err(&pdev->dev, "no device tree node for PCIv3\n");
786 return -ENODEV;
787 }
788
789 if (of_pci_range_parser_init(&parser, np))
790 return -EINVAL;
791
792 /* Get base for bridge registers */
793 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
794 if (!res) {
795 dev_err(&pdev->dev, "unable to obtain PCIv3 base\n");
796 return -ENODEV;
797 }
798 pci_v3_base = devm_ioremap(&pdev->dev, res->start,
799 resource_size(res));
800 if (!pci_v3_base) {
801 dev_err(&pdev->dev, "unable to remap PCIv3 base\n");
802 return -ENODEV;
803 }
804
805 /* Get and request error IRQ resource */
806 irq = platform_get_irq(pdev, 0);
807 if (irq <= 0) {
808 dev_err(&pdev->dev, "unable to obtain PCIv3 error IRQ\n");
809 return -ENODEV;
810 }
811 ret = devm_request_irq(&pdev->dev, irq, v3_irq, 0,
812 "PCIv3 error", NULL);
813 if (ret < 0) {
814 dev_err(&pdev->dev, "unable to request PCIv3 error IRQ %d (%d)\n", irq, ret);
815 return ret;
816 }
817
818 for_each_of_pci_range(&parser, &range) {
819 if (!range.flags) {
820 ret = of_pci_range_to_resource(&range, np, &conf_mem);
821 conf_mem.name = "PCIv3 config";
822 }
823 if (range.flags & IORESOURCE_IO) {
824 ret = of_pci_range_to_resource(&range, np, &io_mem);
825 io_mem.name = "PCIv3 I/O";
826 }
827 if ((range.flags & IORESOURCE_MEM) &&
828 !(range.flags & IORESOURCE_PREFETCH)) {
829 non_mem_pci = range.pci_addr;
830 non_mem_pci_sz = range.size;
831 ret = of_pci_range_to_resource(&range, np, &non_mem);
832 non_mem.name = "PCIv3 non-prefetched mem";
833 }
834 if ((range.flags & IORESOURCE_MEM) &&
835 (range.flags & IORESOURCE_PREFETCH)) {
836 pre_mem_pci = range.pci_addr;
837 pre_mem_pci_sz = range.size;
838 ret = of_pci_range_to_resource(&range, np, &pre_mem);
839 pre_mem.name = "PCIv3 prefetched mem";
840 }
841
842 if (ret < 0) {
843 dev_err(&pdev->dev, "missing ranges in device node\n");
844 return ret;
845 }
846 }
847
848 pci_v3.map_irq = of_irq_parse_and_map_pci;
849 pci_common_init_dev(&pdev->dev, &pci_v3);
850
851 return 0;
852 }
853
854 static const struct of_device_id pci_ids[] = {
855 { .compatible = "v3,v360epc-pci", },
856 {},
857 };
858
859 static struct platform_driver pci_v3_driver = {
860 .driver = {
861 .name = "pci-v3",
862 .of_match_table = pci_ids,
863 },
864 };
865
866 static int __init pci_v3_init(void)
867 {
868 return platform_driver_probe(&pci_v3_driver, pci_v3_probe);
869 }
870
871 subsys_initcall(pci_v3_init);
872
873 /*
874 * Static mappings for the PCIv3 bridge
875 *
876 * e8000000 40000000 PCI memory PHYS_PCI_MEM_BASE (max 512M)
877 * ec000000 61000000 PCI config space PHYS_PCI_CONFIG_BASE (max 16M)
878 * fee00000 60000000 PCI IO PHYS_PCI_IO_BASE (max 16M)
879 */
880 static struct map_desc pci_v3_io_desc[] __initdata __maybe_unused = {
881 {
882 .virtual = (unsigned long)PCI_MEMORY_VADDR,
883 .pfn = __phys_to_pfn(PHYS_PCI_MEM_BASE),
884 .length = SZ_16M,
885 .type = MT_DEVICE
886 }, {
887 .virtual = (unsigned long)PCI_CONFIG_VADDR,
888 .pfn = __phys_to_pfn(PHYS_PCI_CONFIG_BASE),
889 .length = SZ_16M,
890 .type = MT_DEVICE
891 }
892 };
893
894 int __init pci_v3_early_init(void)
895 {
896 iotable_init(pci_v3_io_desc, ARRAY_SIZE(pci_v3_io_desc));
897 vga_base = (unsigned long)PCI_MEMORY_VADDR;
898 pci_map_io_early(__phys_to_pfn(PHYS_PCI_IO_BASE));
899 return 0;
900 }
Linux with added FPC-III support