x86/boot: Rename overlapping memcpy() to memmove()
[linux/fpc-iii.git] / arch / arm / mach-mmp / pm-pxa910.c
blob8b47600b3cdf1af0a571c194d5f34089d79364cd
1 /*
2 * PXA910 Power Management Routines
4 * This software program is licensed subject to the GNU General Public License
5 * (GPL).Version 2,June 1991, available at http://www.fsf.org/copyleft/gpl.html
7 * (C) Copyright 2009 Marvell International Ltd.
8 * All Rights Reserved
9 */
11 #include <linux/kernel.h>
12 #include <linux/errno.h>
13 #include <linux/err.h>
14 #include <linux/time.h>
15 #include <linux/delay.h>
16 #include <linux/suspend.h>
17 #include <linux/interrupt.h>
18 #include <linux/io.h>
19 #include <linux/irq.h>
20 #include <asm/mach-types.h>
21 #include <asm/outercache.h>
23 #include "cputype.h"
24 #include "addr-map.h"
25 #include "pm-pxa910.h"
26 #include "regs-icu.h"
27 #include "irqs.h"
29 int pxa910_set_wake(struct irq_data *data, unsigned int on)
31 uint32_t awucrm = 0, apcr = 0;
32 int irq = data->irq;
34 /* setting wakeup sources */
35 switch (irq) {
36 /* wakeup line 2 */
37 case IRQ_PXA910_AP_GPIO:
38 awucrm = MPMU_AWUCRM_WAKEUP(2);
39 apcr |= MPMU_APCR_SLPWP2;
40 break;
41 /* wakeup line 3 */
42 case IRQ_PXA910_KEYPAD:
43 awucrm = MPMU_AWUCRM_WAKEUP(3) | MPMU_AWUCRM_KEYPRESS;
44 apcr |= MPMU_APCR_SLPWP3;
45 break;
46 case IRQ_PXA910_ROTARY:
47 awucrm = MPMU_AWUCRM_WAKEUP(3) | MPMU_AWUCRM_NEWROTARY;
48 apcr |= MPMU_APCR_SLPWP3;
49 break;
50 case IRQ_PXA910_TRACKBALL:
51 awucrm = MPMU_AWUCRM_WAKEUP(3) | MPMU_AWUCRM_TRACKBALL;
52 apcr |= MPMU_APCR_SLPWP3;
53 break;
54 /* wakeup line 4 */
55 case IRQ_PXA910_AP1_TIMER1:
56 awucrm = MPMU_AWUCRM_WAKEUP(4) | MPMU_AWUCRM_AP1_TIMER_1;
57 apcr |= MPMU_APCR_SLPWP4;
58 break;
59 case IRQ_PXA910_AP1_TIMER2:
60 awucrm = MPMU_AWUCRM_WAKEUP(4) | MPMU_AWUCRM_AP1_TIMER_2;
61 apcr |= MPMU_APCR_SLPWP4;
62 break;
63 case IRQ_PXA910_AP1_TIMER3:
64 awucrm = MPMU_AWUCRM_WAKEUP(4) | MPMU_AWUCRM_AP1_TIMER_3;
65 apcr |= MPMU_APCR_SLPWP4;
66 break;
67 case IRQ_PXA910_AP2_TIMER1:
68 awucrm = MPMU_AWUCRM_WAKEUP(4) | MPMU_AWUCRM_AP2_TIMER_1;
69 apcr |= MPMU_APCR_SLPWP4;
70 break;
71 case IRQ_PXA910_AP2_TIMER2:
72 awucrm = MPMU_AWUCRM_WAKEUP(4) | MPMU_AWUCRM_AP2_TIMER_2;
73 apcr |= MPMU_APCR_SLPWP4;
74 break;
75 case IRQ_PXA910_AP2_TIMER3:
76 awucrm = MPMU_AWUCRM_WAKEUP(4) | MPMU_AWUCRM_AP2_TIMER_3;
77 apcr |= MPMU_APCR_SLPWP4;
78 break;
79 case IRQ_PXA910_RTC_ALARM:
80 awucrm = MPMU_AWUCRM_WAKEUP(4) | MPMU_AWUCRM_RTC_ALARM;
81 apcr |= MPMU_APCR_SLPWP4;
82 break;
83 /* wakeup line 5 */
84 case IRQ_PXA910_USB1:
85 case IRQ_PXA910_USB2:
86 awucrm = MPMU_AWUCRM_WAKEUP(5);
87 apcr |= MPMU_APCR_SLPWP5;
88 break;
89 /* wakeup line 6 */
90 case IRQ_PXA910_MMC:
91 awucrm = MPMU_AWUCRM_WAKEUP(6)
92 | MPMU_AWUCRM_SDH1
93 | MPMU_AWUCRM_SDH2;
94 apcr |= MPMU_APCR_SLPWP6;
95 break;
96 /* wakeup line 7 */
97 case IRQ_PXA910_PMIC_INT:
98 awucrm = MPMU_AWUCRM_WAKEUP(7);
99 apcr |= MPMU_APCR_SLPWP7;
100 break;
101 default:
102 if (irq >= IRQ_GPIO_START && irq < IRQ_BOARD_START) {
103 awucrm = MPMU_AWUCRM_WAKEUP(2);
104 apcr |= MPMU_APCR_SLPWP2;
105 } else {
106 /* FIXME: This should return a proper error code ! */
107 printk(KERN_ERR "Error: no defined wake up source irq: %d\n",
108 irq);
112 if (on) {
113 if (awucrm) {
114 awucrm |= __raw_readl(MPMU_AWUCRM);
115 __raw_writel(awucrm, MPMU_AWUCRM);
117 if (apcr) {
118 apcr = ~apcr & __raw_readl(MPMU_APCR);
119 __raw_writel(apcr, MPMU_APCR);
121 } else {
122 if (awucrm) {
123 awucrm = ~awucrm & __raw_readl(MPMU_AWUCRM);
124 __raw_writel(awucrm, MPMU_AWUCRM);
126 if (apcr) {
127 apcr |= __raw_readl(MPMU_APCR);
128 __raw_writel(apcr, MPMU_APCR);
131 return 0;
134 void pxa910_pm_enter_lowpower_mode(int state)
136 uint32_t idle_cfg, apcr;
138 idle_cfg = __raw_readl(APMU_MOH_IDLE_CFG);
139 apcr = __raw_readl(MPMU_APCR);
141 apcr &= ~(MPMU_APCR_DDRCORSD | MPMU_APCR_APBSD | MPMU_APCR_AXISD
142 | MPMU_APCR_VCTCXOSD | MPMU_APCR_STBYEN);
143 idle_cfg &= ~(APMU_MOH_IDLE_CFG_MOH_IDLE
144 | APMU_MOH_IDLE_CFG_MOH_PWRDWN);
146 switch (state) {
147 case POWER_MODE_UDR:
148 /* only shutdown APB in UDR */
149 apcr |= MPMU_APCR_STBYEN | MPMU_APCR_APBSD;
150 /* fall through */
151 case POWER_MODE_SYS_SLEEP:
152 apcr |= MPMU_APCR_SLPEN; /* set the SLPEN bit */
153 apcr |= MPMU_APCR_VCTCXOSD; /* set VCTCXOSD */
154 /* fall through */
155 case POWER_MODE_APPS_SLEEP:
156 apcr |= MPMU_APCR_DDRCORSD; /* set DDRCORSD */
157 /* fall through */
158 case POWER_MODE_APPS_IDLE:
159 apcr |= MPMU_APCR_AXISD; /* set AXISDD bit */
160 /* fall through */
161 case POWER_MODE_CORE_EXTIDLE:
162 idle_cfg |= APMU_MOH_IDLE_CFG_MOH_IDLE;
163 idle_cfg |= APMU_MOH_IDLE_CFG_MOH_PWRDWN;
164 idle_cfg |= APMU_MOH_IDLE_CFG_MOH_PWR_SW(3)
165 | APMU_MOH_IDLE_CFG_MOH_L2_PWR_SW(3);
166 /* fall through */
167 case POWER_MODE_CORE_INTIDLE:
168 break;
171 /* program the memory controller hardware sleep type and auto wakeup */
172 idle_cfg |= APMU_MOH_IDLE_CFG_MOH_DIS_MC_SW_REQ;
173 idle_cfg |= APMU_MOH_IDLE_CFG_MOH_MC_WAKE_EN;
174 __raw_writel(0x0, APMU_MC_HW_SLP_TYPE); /* auto refresh */
176 /* set DSPSD, DTCMSD, BBSD, MSASLPEN */
177 apcr |= MPMU_APCR_DSPSD | MPMU_APCR_DTCMSD | MPMU_APCR_BBSD
178 | MPMU_APCR_MSASLPEN;
180 /*always set SLEPEN bit mainly for MSA*/
181 apcr |= MPMU_APCR_SLPEN;
183 /* finally write the registers back */
184 __raw_writel(idle_cfg, APMU_MOH_IDLE_CFG);
185 __raw_writel(apcr, MPMU_APCR);
189 static int pxa910_pm_enter(suspend_state_t state)
191 unsigned int idle_cfg, reg = 0;
193 /*pmic thread not completed,exit;otherwise system can't be waked up*/
194 reg = __raw_readl(ICU_INT_CONF(IRQ_PXA910_PMIC_INT));
195 if ((reg & 0x3) == 0)
196 return -EAGAIN;
198 idle_cfg = __raw_readl(APMU_MOH_IDLE_CFG);
199 idle_cfg |= APMU_MOH_IDLE_CFG_MOH_PWRDWN
200 | APMU_MOH_IDLE_CFG_MOH_SRAM_PWRDWN;
201 __raw_writel(idle_cfg, APMU_MOH_IDLE_CFG);
203 /* disable L2 */
204 outer_disable();
205 /* wait for l2 idle */
206 while (!(readl(CIU_REG(0x8)) & (1 << 16)))
207 udelay(1);
209 cpu_do_idle();
211 /* enable L2 */
212 outer_resume();
213 /* wait for l2 idle */
214 while (!(readl(CIU_REG(0x8)) & (1 << 16)))
215 udelay(1);
217 idle_cfg = __raw_readl(APMU_MOH_IDLE_CFG);
218 idle_cfg &= ~(APMU_MOH_IDLE_CFG_MOH_PWRDWN
219 | APMU_MOH_IDLE_CFG_MOH_SRAM_PWRDWN);
220 __raw_writel(idle_cfg, APMU_MOH_IDLE_CFG);
222 return 0;
226 * Called after processes are frozen, but before we shut down devices.
228 static int pxa910_pm_prepare(void)
230 pxa910_pm_enter_lowpower_mode(POWER_MODE_UDR);
231 return 0;
235 * Called after devices are re-setup, but before processes are thawed.
237 static void pxa910_pm_finish(void)
239 pxa910_pm_enter_lowpower_mode(POWER_MODE_CORE_INTIDLE);
242 static int pxa910_pm_valid(suspend_state_t state)
244 return ((state == PM_SUSPEND_STANDBY) || (state == PM_SUSPEND_MEM));
247 static const struct platform_suspend_ops pxa910_pm_ops = {
248 .valid = pxa910_pm_valid,
249 .prepare = pxa910_pm_prepare,
250 .enter = pxa910_pm_enter,
251 .finish = pxa910_pm_finish,
254 static int __init pxa910_pm_init(void)
256 uint32_t awucrm = 0;
258 if (!cpu_is_pxa910())
259 return -EIO;
261 suspend_set_ops(&pxa910_pm_ops);
263 /* Set the following bits for MMP3 playback with VCTXO on */
264 __raw_writel(__raw_readl(APMU_SQU_CLK_GATE_CTRL) | (1 << 30),
265 APMU_SQU_CLK_GATE_CTRL);
266 __raw_writel(__raw_readl(MPMU_FCCR) | (1 << 28), MPMU_FCCR);
268 awucrm |= MPMU_AWUCRM_AP_ASYNC_INT | MPMU_AWUCRM_AP_FULL_IDLE;
269 __raw_writel(awucrm, MPMU_AWUCRM);
271 return 0;
274 late_initcall(pxa910_pm_init);