4 * Copyright (C) 2011-2012 Texas Instruments Incorporated - http://www.ti.com/
6 * This program is free software; you can redistribute it and/or
7 * modify it under the terms of the GNU General Public License as
8 * published by the Free Software Foundation version 2.
10 * This program is distributed "as is" WITHOUT ANY WARRANTY of any
11 * kind, whether express or implied; without even the implied warranty
12 * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 * GNU General Public License for more details.
16 #include <linux/kernel.h>
17 #include <linux/types.h>
18 #include <linux/errno.h>
19 #include <linux/err.h>
22 #include "powerdomain.h"
24 #include "prm-regbits-33xx.h"
26 #define AM33XX_PRM_RSTCTRL_OFFSET 0x0000
28 #define AM33XX_RST_GLOBAL_WARM_SW_MASK (1 << 0)
30 /* Read a register in a PRM instance */
31 static u32
am33xx_prm_read_reg(s16 inst
, u16 idx
)
33 return readl_relaxed(prm_base
+ inst
+ idx
);
36 /* Write into a register in a PRM instance */
37 static void am33xx_prm_write_reg(u32 val
, s16 inst
, u16 idx
)
39 writel_relaxed(val
, prm_base
+ inst
+ idx
);
42 /* Read-modify-write a register in PRM. Caller must lock */
43 static u32
am33xx_prm_rmw_reg_bits(u32 mask
, u32 bits
, s16 inst
, s16 idx
)
47 v
= am33xx_prm_read_reg(inst
, idx
);
50 am33xx_prm_write_reg(v
, inst
, idx
);
56 * am33xx_prm_is_hardreset_asserted - read the HW reset line state of
57 * submodules contained in the hwmod module
58 * @shift: register bit shift corresponding to the reset line to check
59 * @part: PRM partition, ignored for AM33xx
60 * @inst: CM instance register offset (*_INST macro)
61 * @rstctrl_offs: RM_RSTCTRL register address offset for this module
63 * Returns 1 if the (sub)module hardreset line is currently asserted,
64 * 0 if the (sub)module hardreset line is not currently asserted, or
65 * -EINVAL upon parameter error.
67 static int am33xx_prm_is_hardreset_asserted(u8 shift
, u8 part
, s16 inst
,
72 v
= am33xx_prm_read_reg(inst
, rstctrl_offs
);
80 * am33xx_prm_assert_hardreset - assert the HW reset line of a submodule
81 * @shift: register bit shift corresponding to the reset line to assert
82 * @part: CM partition, ignored for AM33xx
83 * @inst: CM instance register offset (*_INST macro)
84 * @rstctrl_reg: RM_RSTCTRL register address for this module
86 * Some IPs like dsp, ipu or iva contain processors that require an HW
87 * reset line to be asserted / deasserted in order to fully enable the
88 * IP. These modules may have multiple hard-reset lines that reset
89 * different 'submodules' inside the IP block. This function will
90 * place the submodule into reset. Returns 0 upon success or -EINVAL
91 * upon an argument error.
93 static int am33xx_prm_assert_hardreset(u8 shift
, u8 part
, s16 inst
,
96 u32 mask
= 1 << shift
;
98 am33xx_prm_rmw_reg_bits(mask
, mask
, inst
, rstctrl_offs
);
104 * am33xx_prm_deassert_hardreset - deassert a submodule hardreset line and
106 * @shift: register bit shift corresponding to the reset line to deassert
107 * @st_shift: reset status register bit shift corresponding to the reset line
108 * @part: PRM partition, not used for AM33xx
109 * @inst: CM instance register offset (*_INST macro)
110 * @rstctrl_reg: RM_RSTCTRL register address for this module
111 * @rstst_reg: RM_RSTST register address for this module
113 * Some IPs like dsp, ipu or iva contain processors that require an HW
114 * reset line to be asserted / deasserted in order to fully enable the
115 * IP. These modules may have multiple hard-reset lines that reset
116 * different 'submodules' inside the IP block. This function will
117 * take the submodule out of reset and wait until the PRCM indicates
118 * that the reset has completed before returning. Returns 0 upon success or
119 * -EINVAL upon an argument error, -EEXIST if the submodule was already out
120 * of reset, or -EBUSY if the submodule did not exit reset promptly.
122 static int am33xx_prm_deassert_hardreset(u8 shift
, u8 st_shift
, u8 part
,
123 s16 inst
, u16 rstctrl_offs
,
127 u32 mask
= 1 << st_shift
;
129 /* Check the current status to avoid de-asserting the line twice */
130 if (am33xx_prm_is_hardreset_asserted(shift
, 0, inst
, rstctrl_offs
) == 0)
133 /* Clear the reset status by writing 1 to the status bit */
134 am33xx_prm_rmw_reg_bits(0xffffffff, mask
, inst
, rstst_offs
);
136 /* de-assert the reset control line */
139 am33xx_prm_rmw_reg_bits(mask
, 0, inst
, rstctrl_offs
);
141 /* wait the status to be set */
142 omap_test_timeout(am33xx_prm_is_hardreset_asserted(st_shift
, 0, inst
,
144 MAX_MODULE_HARDRESET_WAIT
, c
);
146 return (c
== MAX_MODULE_HARDRESET_WAIT
) ? -EBUSY
: 0;
149 static int am33xx_pwrdm_set_next_pwrst(struct powerdomain
*pwrdm
, u8 pwrst
)
151 am33xx_prm_rmw_reg_bits(OMAP_POWERSTATE_MASK
,
152 (pwrst
<< OMAP_POWERSTATE_SHIFT
),
153 pwrdm
->prcm_offs
, pwrdm
->pwrstctrl_offs
);
157 static int am33xx_pwrdm_read_next_pwrst(struct powerdomain
*pwrdm
)
161 v
= am33xx_prm_read_reg(pwrdm
->prcm_offs
, pwrdm
->pwrstctrl_offs
);
162 v
&= OMAP_POWERSTATE_MASK
;
163 v
>>= OMAP_POWERSTATE_SHIFT
;
168 static int am33xx_pwrdm_read_pwrst(struct powerdomain
*pwrdm
)
172 v
= am33xx_prm_read_reg(pwrdm
->prcm_offs
, pwrdm
->pwrstst_offs
);
173 v
&= OMAP_POWERSTATEST_MASK
;
174 v
>>= OMAP_POWERSTATEST_SHIFT
;
179 static int am33xx_pwrdm_read_prev_pwrst(struct powerdomain
*pwrdm
)
183 v
= am33xx_prm_read_reg(pwrdm
->prcm_offs
, pwrdm
->pwrstst_offs
);
184 v
&= AM33XX_LASTPOWERSTATEENTERED_MASK
;
185 v
>>= AM33XX_LASTPOWERSTATEENTERED_SHIFT
;
190 static int am33xx_pwrdm_set_lowpwrstchange(struct powerdomain
*pwrdm
)
192 am33xx_prm_rmw_reg_bits(AM33XX_LOWPOWERSTATECHANGE_MASK
,
193 (1 << AM33XX_LOWPOWERSTATECHANGE_SHIFT
),
194 pwrdm
->prcm_offs
, pwrdm
->pwrstctrl_offs
);
198 static int am33xx_pwrdm_clear_all_prev_pwrst(struct powerdomain
*pwrdm
)
200 am33xx_prm_rmw_reg_bits(AM33XX_LASTPOWERSTATEENTERED_MASK
,
201 AM33XX_LASTPOWERSTATEENTERED_MASK
,
202 pwrdm
->prcm_offs
, pwrdm
->pwrstst_offs
);
206 static int am33xx_pwrdm_set_logic_retst(struct powerdomain
*pwrdm
, u8 pwrst
)
210 m
= pwrdm
->logicretstate_mask
;
214 am33xx_prm_rmw_reg_bits(m
, (pwrst
<< __ffs(m
)),
215 pwrdm
->prcm_offs
, pwrdm
->pwrstctrl_offs
);
220 static int am33xx_pwrdm_read_logic_pwrst(struct powerdomain
*pwrdm
)
224 v
= am33xx_prm_read_reg(pwrdm
->prcm_offs
, pwrdm
->pwrstst_offs
);
225 v
&= AM33XX_LOGICSTATEST_MASK
;
226 v
>>= AM33XX_LOGICSTATEST_SHIFT
;
231 static int am33xx_pwrdm_read_logic_retst(struct powerdomain
*pwrdm
)
235 m
= pwrdm
->logicretstate_mask
;
239 v
= am33xx_prm_read_reg(pwrdm
->prcm_offs
, pwrdm
->pwrstctrl_offs
);
246 static int am33xx_pwrdm_set_mem_onst(struct powerdomain
*pwrdm
, u8 bank
,
251 m
= pwrdm
->mem_on_mask
[bank
];
255 am33xx_prm_rmw_reg_bits(m
, (pwrst
<< __ffs(m
)),
256 pwrdm
->prcm_offs
, pwrdm
->pwrstctrl_offs
);
261 static int am33xx_pwrdm_set_mem_retst(struct powerdomain
*pwrdm
, u8 bank
,
266 m
= pwrdm
->mem_ret_mask
[bank
];
270 am33xx_prm_rmw_reg_bits(m
, (pwrst
<< __ffs(m
)),
271 pwrdm
->prcm_offs
, pwrdm
->pwrstctrl_offs
);
276 static int am33xx_pwrdm_read_mem_pwrst(struct powerdomain
*pwrdm
, u8 bank
)
280 m
= pwrdm
->mem_pwrst_mask
[bank
];
284 v
= am33xx_prm_read_reg(pwrdm
->prcm_offs
, pwrdm
->pwrstst_offs
);
291 static int am33xx_pwrdm_read_mem_retst(struct powerdomain
*pwrdm
, u8 bank
)
295 m
= pwrdm
->mem_retst_mask
[bank
];
299 v
= am33xx_prm_read_reg(pwrdm
->prcm_offs
, pwrdm
->pwrstctrl_offs
);
306 static int am33xx_pwrdm_wait_transition(struct powerdomain
*pwrdm
)
311 * REVISIT: pwrdm_wait_transition() may be better implemented
312 * via a callback and a periodic timer check -- how long do we expect
313 * powerdomain transitions to take?
316 /* XXX Is this udelay() value meaningful? */
317 while ((am33xx_prm_read_reg(pwrdm
->prcm_offs
, pwrdm
->pwrstst_offs
)
318 & OMAP_INTRANSITION_MASK
) &&
319 (c
++ < PWRDM_TRANSITION_BAILOUT
))
322 if (c
> PWRDM_TRANSITION_BAILOUT
) {
323 pr_err("powerdomain: %s: waited too long to complete transition\n",
328 pr_debug("powerdomain: completed transition in %d loops\n", c
);
333 static int am33xx_check_vcvp(void)
335 /* No VC/VP on am33xx devices */
340 * am33xx_prm_global_warm_sw_reset - reboot the device via warm reset
342 * Immediately reboots the device through warm reset.
344 static void am33xx_prm_global_warm_sw_reset(void)
346 am33xx_prm_rmw_reg_bits(AM33XX_RST_GLOBAL_WARM_SW_MASK
,
347 AM33XX_RST_GLOBAL_WARM_SW_MASK
,
348 AM33XX_PRM_DEVICE_MOD
,
349 AM33XX_PRM_RSTCTRL_OFFSET
);
352 (void)am33xx_prm_read_reg(AM33XX_PRM_DEVICE_MOD
,
353 AM33XX_PRM_RSTCTRL_OFFSET
);
356 struct pwrdm_ops am33xx_pwrdm_operations
= {
357 .pwrdm_set_next_pwrst
= am33xx_pwrdm_set_next_pwrst
,
358 .pwrdm_read_next_pwrst
= am33xx_pwrdm_read_next_pwrst
,
359 .pwrdm_read_pwrst
= am33xx_pwrdm_read_pwrst
,
360 .pwrdm_read_prev_pwrst
= am33xx_pwrdm_read_prev_pwrst
,
361 .pwrdm_set_logic_retst
= am33xx_pwrdm_set_logic_retst
,
362 .pwrdm_read_logic_pwrst
= am33xx_pwrdm_read_logic_pwrst
,
363 .pwrdm_read_logic_retst
= am33xx_pwrdm_read_logic_retst
,
364 .pwrdm_clear_all_prev_pwrst
= am33xx_pwrdm_clear_all_prev_pwrst
,
365 .pwrdm_set_lowpwrstchange
= am33xx_pwrdm_set_lowpwrstchange
,
366 .pwrdm_read_mem_pwrst
= am33xx_pwrdm_read_mem_pwrst
,
367 .pwrdm_read_mem_retst
= am33xx_pwrdm_read_mem_retst
,
368 .pwrdm_set_mem_onst
= am33xx_pwrdm_set_mem_onst
,
369 .pwrdm_set_mem_retst
= am33xx_pwrdm_set_mem_retst
,
370 .pwrdm_wait_transition
= am33xx_pwrdm_wait_transition
,
371 .pwrdm_has_voltdm
= am33xx_check_vcvp
,
374 static struct prm_ll_data am33xx_prm_ll_data
= {
375 .assert_hardreset
= am33xx_prm_assert_hardreset
,
376 .deassert_hardreset
= am33xx_prm_deassert_hardreset
,
377 .is_hardreset_asserted
= am33xx_prm_is_hardreset_asserted
,
378 .reset_system
= am33xx_prm_global_warm_sw_reset
,
381 int __init
am33xx_prm_init(const struct omap_prcm_init_data
*data
)
383 return prm_register(&am33xx_prm_ll_data
);
386 static void __exit
am33xx_prm_exit(void)
388 prm_unregister(&am33xx_prm_ll_data
);
390 __exitcall(am33xx_prm_exit
);