x86/boot: Rename overlapping memcpy() to memmove()

[linux/fpc-iii.git] / arch / arm / mach-omap2 / timer.c

/*
 * linux/arch/arm/mach-omap2/timer.c
 *
 * OMAP2 GP timer support.
 *
 * Copyright (C) 2009 Nokia Corporation
 *
 * Update to use new clocksource/clockevent layers
 * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com>
 * Copyright (C) 2007 MontaVista Software, Inc.
 *
 * Original driver:
 * Copyright (C) 2005 Nokia Corporation
 * Author: Paul Mundt <paul.mundt@nokia.com>
 *         Juha Yrjölä <juha.yrjola@nokia.com>
 * OMAP Dual-mode timer framework support by Timo Teras
 *
 * Some parts based off of TI's 24xx code:
 *
 * Copyright (C) 2004-2009 Texas Instruments, Inc.
 *
 * Roughly modelled after the OMAP1 MPU timer code.
 * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
 *
 * This file is subject to the terms and conditions of the GNU General Public
 * License. See the file "COPYING" in the main directory of this archive
 * for more details.
 */
#include <linux/init.h>
#include <linux/time.h>
#include <linux/interrupt.h>
#include <linux/err.h>
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/irq.h>
#include <linux/clocksource.h>
#include <linux/clockchips.h>
#include <linux/slab.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
#include <linux/platform_device.h>
#include <linux/platform_data/dmtimer-omap.h>
#include <linux/sched_clock.h>

#include <asm/mach/time.h>
#include <asm/smp_twd.h>

#include "omap_hwmod.h"
#include "omap_device.h"
#include <plat/counter-32k.h>
#include <plat/dmtimer.h>
#include "omap-pm.h"

#include "soc.h"
#include "common.h"
#include "control.h"
#include "powerdomain.h"
#include "omap-secure.h"

#define REALTIME_COUNTER_BASE                           0x48243200
#define INCREMENTER_NUMERATOR_OFFSET                    0x10
#define INCREMENTER_DENUMERATOR_RELOAD_OFFSET           0x14
#define NUMERATOR_DENUMERATOR_MASK                      0xfffff000

/* Clockevent code */

static struct omap_dm_timer clkev;
static struct clock_event_device clockevent_gpt;

#ifdef CONFIG_SOC_HAS_REALTIME_COUNTER
static unsigned long arch_timer_freq;

void set_cntfreq(void)
{
        omap_smc1(OMAP5_DRA7_MON_SET_CNTFRQ_INDEX, arch_timer_freq);
}
#endif

static irqreturn_t omap2_gp_timer_interrupt(int irq, void *dev_id)
{
        struct clock_event_device *evt = &clockevent_gpt;

        __omap_dm_timer_write_status(&clkev, OMAP_TIMER_INT_OVERFLOW);

        evt->event_handler(evt);
        return IRQ_HANDLED;
}

static struct irqaction omap2_gp_timer_irq = {
        .name           = "gp_timer",
        .flags          = IRQF_TIMER | IRQF_IRQPOLL,
        .handler        = omap2_gp_timer_interrupt,
};

static int omap2_gp_timer_set_next_event(unsigned long cycles,
                                         struct clock_event_device *evt)
{
        __omap_dm_timer_load_start(&clkev, OMAP_TIMER_CTRL_ST,
                                   0xffffffff - cycles, OMAP_TIMER_POSTED);

        return 0;
}

static int omap2_gp_timer_shutdown(struct clock_event_device *evt)
{
        __omap_dm_timer_stop(&clkev, OMAP_TIMER_POSTED, clkev.rate);
        return 0;
}

static int omap2_gp_timer_set_periodic(struct clock_event_device *evt)
{
        u32 period;

        __omap_dm_timer_stop(&clkev, OMAP_TIMER_POSTED, clkev.rate);

        period = clkev.rate / HZ;
        period -= 1;
        /* Looks like we need to first set the load value separately */
        __omap_dm_timer_write(&clkev, OMAP_TIMER_LOAD_REG, 0xffffffff - period,
                              OMAP_TIMER_POSTED);
        __omap_dm_timer_load_start(&clkev,
                                   OMAP_TIMER_CTRL_AR | OMAP_TIMER_CTRL_ST,
                                   0xffffffff - period, OMAP_TIMER_POSTED);
        return 0;
}

static struct clock_event_device clockevent_gpt = {
        .features               = CLOCK_EVT_FEAT_PERIODIC |
                                  CLOCK_EVT_FEAT_ONESHOT,
        .rating                 = 300,
        .set_next_event         = omap2_gp_timer_set_next_event,
        .set_state_shutdown     = omap2_gp_timer_shutdown,
        .set_state_periodic     = omap2_gp_timer_set_periodic,
        .set_state_oneshot      = omap2_gp_timer_shutdown,
        .tick_resume            = omap2_gp_timer_shutdown,
};

static struct property device_disabled = {
        .name = "status",
        .length = sizeof("disabled"),
        .value = "disabled",
};

static const struct of_device_id omap_timer_match[] __initconst = {
        { .compatible = "ti,omap2420-timer", },
        { .compatible = "ti,omap3430-timer", },
        { .compatible = "ti,omap4430-timer", },
        { .compatible = "ti,omap5430-timer", },
        { .compatible = "ti,dm814-timer", },
        { .compatible = "ti,dm816-timer", },
        { .compatible = "ti,am335x-timer", },
        { .compatible = "ti,am335x-timer-1ms", },
        { }
};

/**
 * omap_get_timer_dt - get a timer using device-tree
 * @match       - device-tree match structure for matching a device type
 * @property    - optional timer property to match
 *
 * Helper function to get a timer during early boot using device-tree for use
 * as kernel system timer. Optionally, the property argument can be used to
 * select a timer with a specific property. Once a timer is found then mark
 * the timer node in device-tree as disabled, to prevent the kernel from
 * registering this timer as a platform device and so no one else can use it.
 */
static struct device_node * __init omap_get_timer_dt(const struct of_device_id *match,
                                                     const char *property)
{
        struct device_node *np;

        for_each_matching_node(np, match) {
                if (!of_device_is_available(np))
                        continue;

                if (property && !of_get_property(np, property, NULL))
                        continue;

                if (!property && (of_get_property(np, "ti,timer-alwon", NULL) ||
                                  of_get_property(np, "ti,timer-dsp", NULL) ||
                                  of_get_property(np, "ti,timer-pwm", NULL) ||
                                  of_get_property(np, "ti,timer-secure", NULL)))
                        continue;

                if (!of_device_is_compatible(np, "ti,omap-counter32k"))
                        of_add_property(np, &device_disabled);
                return np;
        }

        return NULL;
}

/**
 * omap_dmtimer_init - initialisation function when device tree is used
 *
 * For secure OMAP3/DRA7xx devices, timers with device type "timer-secure"
 * cannot be used by the kernel as they are reserved. Therefore, to prevent the
 * kernel registering these devices remove them dynamically from the device
 * tree on boot.
 */
static void __init omap_dmtimer_init(void)
{
        struct device_node *np;

        if (!cpu_is_omap34xx() && !soc_is_dra7xx())
                return;

        /* If we are a secure device, remove any secure timer nodes */
        if ((omap_type() != OMAP2_DEVICE_TYPE_GP)) {
                np = omap_get_timer_dt(omap_timer_match, "ti,timer-secure");
                of_node_put(np);
        }
}

/**
 * omap_dm_timer_get_errata - get errata flags for a timer
 *
 * Get the timer errata flags that are specific to the OMAP device being used.
 */
static u32 __init omap_dm_timer_get_errata(void)
{
        if (cpu_is_omap24xx())
                return 0;

        return OMAP_TIMER_ERRATA_I103_I767;
}

static int __init omap_dm_timer_init_one(struct omap_dm_timer *timer,
                                         const char *fck_source,
                                         const char *property,
                                         const char **timer_name,
                                         int posted)
{
        char name[10]; /* 10 = sizeof("gptXX_Xck0") */
        const char *oh_name = NULL;
        struct device_node *np;
        struct omap_hwmod *oh;
        struct resource irq, mem;
        struct clk *src;
        int r = 0;

        if (of_have_populated_dt()) {
                np = omap_get_timer_dt(omap_timer_match, property);
                if (!np)
                        return -ENODEV;

                of_property_read_string_index(np, "ti,hwmods", 0, &oh_name);
                if (!oh_name)
                        return -ENODEV;

                timer->irq = irq_of_parse_and_map(np, 0);
                if (!timer->irq)
                        return -ENXIO;

                timer->io_base = of_iomap(np, 0);

                of_node_put(np);
        } else {
                if (omap_dm_timer_reserve_systimer(timer->id))
                        return -ENODEV;

                sprintf(name, "timer%d", timer->id);
                oh_name = name;
        }

        oh = omap_hwmod_lookup(oh_name);
        if (!oh)
                return -ENODEV;

        *timer_name = oh->name;

        if (!of_have_populated_dt()) {
                r = omap_hwmod_get_resource_byname(oh, IORESOURCE_IRQ, NULL,
                                                   &irq);
                if (r)
                        return -ENXIO;
                timer->irq = irq.start;

                r = omap_hwmod_get_resource_byname(oh, IORESOURCE_MEM, NULL,
                                                   &mem);
                if (r)
                        return -ENXIO;

                /* Static mapping, never released */
                timer->io_base = ioremap(mem.start, mem.end - mem.start);
        }

        if (!timer->io_base)
                return -ENXIO;

        /* After the dmtimer is using hwmod these clocks won't be needed */
        timer->fclk = clk_get(NULL, omap_hwmod_get_main_clk(oh));
        if (IS_ERR(timer->fclk))
                return PTR_ERR(timer->fclk);

        src = clk_get(NULL, fck_source);
        if (IS_ERR(src))
                return PTR_ERR(src);

        WARN(clk_set_parent(timer->fclk, src) < 0,
             "Cannot set timer parent clock, no PLL clock driver?");

        clk_put(src);

        omap_hwmod_setup_one(oh_name);
        omap_hwmod_enable(oh);
        __omap_dm_timer_init_regs(timer);

        if (posted)
                __omap_dm_timer_enable_posted(timer);

        /* Check that the intended posted configuration matches the actual */
        if (posted != timer->posted)
                return -EINVAL;

        timer->rate = clk_get_rate(timer->fclk);
        timer->reserved = 1;

        return r;
}

#if !defined(CONFIG_SMP) && defined(CONFIG_GENERIC_CLOCKEVENTS_BROADCAST)
void tick_broadcast(const struct cpumask *mask)
{
}
#endif

static void __init omap2_gp_clockevent_init(int gptimer_id,
                                                const char *fck_source,
                                                const char *property)
{
        int res;

        clkev.id = gptimer_id;
        clkev.errata = omap_dm_timer_get_errata();

        /*
         * For clock-event timers we never read the timer counter and
         * so we are not impacted by errata i103 and i767. Therefore,
         * we can safely ignore this errata for clock-event timers.
         */
        __omap_dm_timer_override_errata(&clkev, OMAP_TIMER_ERRATA_I103_I767);

        res = omap_dm_timer_init_one(&clkev, fck_source, property,
                                     &clockevent_gpt.name, OMAP_TIMER_POSTED);
        BUG_ON(res);

        omap2_gp_timer_irq.dev_id = &clkev;
        setup_irq(clkev.irq, &omap2_gp_timer_irq);

        __omap_dm_timer_int_enable(&clkev, OMAP_TIMER_INT_OVERFLOW);

        clockevent_gpt.cpumask = cpu_possible_mask;
        clockevent_gpt.irq = omap_dm_timer_get_irq(&clkev);
        clockevents_config_and_register(&clockevent_gpt, clkev.rate,
                                        3, /* Timer internal resynch latency */
                                        0xffffffff);

        pr_info("OMAP clockevent source: %s at %lu Hz\n", clockevent_gpt.name,
                clkev.rate);
}

/* Clocksource code */
static struct omap_dm_timer clksrc;
static bool use_gptimer_clksrc __initdata;

/*
 * clocksource
 */
static cycle_t clocksource_read_cycles(struct clocksource *cs)
{
        return (cycle_t)__omap_dm_timer_read_counter(&clksrc,
                                                     OMAP_TIMER_NONPOSTED);
}

static struct clocksource clocksource_gpt = {
        .rating         = 300,
        .read           = clocksource_read_cycles,
        .mask           = CLOCKSOURCE_MASK(32),
        .flags          = CLOCK_SOURCE_IS_CONTINUOUS,
};

static u64 notrace dmtimer_read_sched_clock(void)
{
        if (clksrc.reserved)
                return __omap_dm_timer_read_counter(&clksrc,
                                                    OMAP_TIMER_NONPOSTED);

        return 0;
}

static const struct of_device_id omap_counter_match[] __initconst = {
        { .compatible = "ti,omap-counter32k", },
        { }
};

/* Setup free-running counter for clocksource */
static int __init __maybe_unused omap2_sync32k_clocksource_init(void)
{
        int ret;
        struct device_node *np = NULL;
        struct omap_hwmod *oh;
        const char *oh_name = "counter_32k";

        /*
         * If device-tree is present, then search the DT blob
         * to see if the 32kHz counter is supported.
         */
        if (of_have_populated_dt()) {
                np = omap_get_timer_dt(omap_counter_match, NULL);
                if (!np)
                        return -ENODEV;

                of_property_read_string_index(np, "ti,hwmods", 0, &oh_name);
                if (!oh_name)
                        return -ENODEV;
        }

        /*
         * First check hwmod data is available for sync32k counter
         */
        oh = omap_hwmod_lookup(oh_name);
        if (!oh || oh->slaves_cnt == 0)
                return -ENODEV;

        omap_hwmod_setup_one(oh_name);

        ret = omap_hwmod_enable(oh);
        if (ret) {
                pr_warn("%s: failed to enable counter_32k module (%d)\n",
                                                        __func__, ret);
                return ret;
        }

        if (!of_have_populated_dt()) {
                void __iomem *vbase;

                vbase = omap_hwmod_get_mpu_rt_va(oh);

                ret = omap_init_clocksource_32k(vbase);
                if (ret) {
                        pr_warn("%s: failed to initialize counter_32k as a clocksource (%d)\n",
                                        __func__, ret);
                        omap_hwmod_idle(oh);
                }
        }
        return ret;
}

static void __init omap2_gptimer_clocksource_init(int gptimer_id,
                                                  const char *fck_source,
                                                  const char *property)
{
        int res;

        clksrc.id = gptimer_id;
        clksrc.errata = omap_dm_timer_get_errata();

        res = omap_dm_timer_init_one(&clksrc, fck_source, property,
                                     &clocksource_gpt.name,
                                     OMAP_TIMER_NONPOSTED);
        BUG_ON(res);

        __omap_dm_timer_load_start(&clksrc,
                                   OMAP_TIMER_CTRL_ST | OMAP_TIMER_CTRL_AR, 0,
                                   OMAP_TIMER_NONPOSTED);
        sched_clock_register(dmtimer_read_sched_clock, 32, clksrc.rate);

        if (clocksource_register_hz(&clocksource_gpt, clksrc.rate))
                pr_err("Could not register clocksource %s\n",
                        clocksource_gpt.name);
        else
                pr_info("OMAP clocksource: %s at %lu Hz\n",
                        clocksource_gpt.name, clksrc.rate);
}

static void __init __omap_sync32k_timer_init(int clkev_nr, const char *clkev_src,
                const char *clkev_prop, int clksrc_nr, const char *clksrc_src,
                const char *clksrc_prop, bool gptimer)
{
        omap_clk_init();
        omap_dmtimer_init();
        omap2_gp_clockevent_init(clkev_nr, clkev_src, clkev_prop);

        /* Enable the use of clocksource="gp_timer" kernel parameter */
        if (use_gptimer_clksrc || gptimer)
                omap2_gptimer_clocksource_init(clksrc_nr, clksrc_src,
                                                clksrc_prop);
        else
                omap2_sync32k_clocksource_init();
}

void __init omap_init_time(void)
{
        __omap_sync32k_timer_init(1, "timer_32k_ck", "ti,timer-alwon",
                        2, "timer_sys_ck", NULL, false);

        if (of_have_populated_dt())
                clocksource_probe();
}

#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_SOC_AM43XX)
void __init omap3_secure_sync32k_timer_init(void)
{
        __omap_sync32k_timer_init(12, "secure_32k_fck", "ti,timer-secure",
                        2, "timer_sys_ck", NULL, false);
}
#endif /* CONFIG_ARCH_OMAP3 */

#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_SOC_AM33XX)
void __init omap3_gptimer_timer_init(void)
{
        __omap_sync32k_timer_init(2, "timer_sys_ck", NULL,
                        1, "timer_sys_ck", "ti,timer-alwon", true);
}
#endif

#if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5) ||          \
        defined(CONFIG_SOC_DRA7XX) || defined(CONFIG_SOC_AM43XX)
static void __init omap4_sync32k_timer_init(void)
{
        __omap_sync32k_timer_init(1, "timer_32k_ck", "ti,timer-alwon",
                        2, "sys_clkin_ck", NULL, false);
}

void __init omap4_local_timer_init(void)
{
        omap4_sync32k_timer_init();
        clocksource_probe();
}
#endif

#if defined(CONFIG_SOC_OMAP5) || defined(CONFIG_SOC_DRA7XX)

/*
 * The realtime counter also called master counter, is a free-running
 * counter, which is related to real time. It produces the count used
 * by the CPU local timer peripherals in the MPU cluster. The timer counts
 * at a rate of 6.144 MHz. Because the device operates on different clocks
 * in different power modes, the master counter shifts operation between
 * clocks, adjusting the increment per clock in hardware accordingly to
 * maintain a constant count rate.
 */
static void __init realtime_counter_init(void)
{
#ifdef CONFIG_SOC_HAS_REALTIME_COUNTER
        void __iomem *base;
        static struct clk *sys_clk;
        unsigned long rate;
        unsigned int reg;
        unsigned long long num, den;

        base = ioremap(REALTIME_COUNTER_BASE, SZ_32);
        if (!base) {
                pr_err("%s: ioremap failed\n", __func__);
                return;
        }
        sys_clk = clk_get(NULL, "sys_clkin");
        if (IS_ERR(sys_clk)) {
                pr_err("%s: failed to get system clock handle\n", __func__);
                iounmap(base);
                return;
        }

        rate = clk_get_rate(sys_clk);

        if (soc_is_dra7xx()) {
                /*
                 * Errata i856 says the 32.768KHz crystal does not start at
                 * power on, so the CPU falls back to an emulated 32KHz clock
                 * based on sysclk / 610 instead. This causes the master counter
                 * frequency to not be 6.144MHz but at sysclk / 610 * 375 / 2
                 * (OR sysclk * 75 / 244)
                 *
                 * This affects at least the DRA7/AM572x 1.0, 1.1 revisions.
                 * Of course any board built without a populated 32.768KHz
                 * crystal would also need this fix even if the CPU is fixed
                 * later.
                 *
                 * Either case can be detected by using the two speedselect bits
                 * If they are not 0, then the 32.768KHz clock driving the
                 * coarse counter that corrects the fine counter every time it
                 * ticks is actually rate/610 rather than 32.768KHz and we
                 * should compensate to avoid the 570ppm (at 20MHz, much worse
                 * at other rates) too fast system time.
                 */
                reg = omap_ctrl_readl(DRA7_CTRL_CORE_BOOTSTRAP);
                if (reg & DRA7_SPEEDSELECT_MASK) {
                        num = 75;
                        den = 244;
                        goto sysclk1_based;
                }
        }

        /* Numerator/denumerator values refer TRM Realtime Counter section */
        switch (rate) {
        case 12000000:
                num = 64;
                den = 125;
                break;
        case 13000000:
                num = 768;
                den = 1625;
                break;
        case 19200000:
                num = 8;
                den = 25;
                break;
        case 20000000:
                num = 192;
                den = 625;
                break;
        case 26000000:
                num = 384;
                den = 1625;
                break;
        case 27000000:
                num = 256;
                den = 1125;
                break;
        case 38400000:
        default:
                /* Program it for 38.4 MHz */
                num = 4;
                den = 25;
                break;
        }

sysclk1_based:
        /* Program numerator and denumerator registers */
        reg = readl_relaxed(base + INCREMENTER_NUMERATOR_OFFSET) &
                        NUMERATOR_DENUMERATOR_MASK;
        reg |= num;
        writel_relaxed(reg, base + INCREMENTER_NUMERATOR_OFFSET);

        reg = readl_relaxed(base + INCREMENTER_DENUMERATOR_RELOAD_OFFSET) &
                        NUMERATOR_DENUMERATOR_MASK;
        reg |= den;
        writel_relaxed(reg, base + INCREMENTER_DENUMERATOR_RELOAD_OFFSET);

        arch_timer_freq = DIV_ROUND_UP_ULL(rate * num, den);
        set_cntfreq();

        iounmap(base);
#endif
}

void __init omap5_realtime_timer_init(void)
{
        omap4_sync32k_timer_init();
        realtime_counter_init();

        clocksource_probe();
}
#endif /* CONFIG_SOC_OMAP5 || CONFIG_SOC_DRA7XX */

/**
 * omap_timer_init - build and register timer device with an
 * associated timer hwmod
 * @oh: timer hwmod pointer to be used to build timer device
 * @user:       parameter that can be passed from calling hwmod API
 *
 * Called by omap_hwmod_for_each_by_class to register each of the timer
 * devices present in the system. The number of timer devices is known
 * by parsing through the hwmod database for a given class name. At the
 * end of function call memory is allocated for timer device and it is
 * registered to the framework ready to be proved by the driver.
 */
static int __init omap_timer_init(struct omap_hwmod *oh, void *unused)
{
        int id;
        int ret = 0;
        char *name = "omap_timer";
        struct dmtimer_platform_data *pdata;
        struct platform_device *pdev;
        struct omap_timer_capability_dev_attr *timer_dev_attr;

        pr_debug("%s: %s\n", __func__, oh->name);

        /* on secure device, do not register secure timer */
        timer_dev_attr = oh->dev_attr;
        if (omap_type() != OMAP2_DEVICE_TYPE_GP && timer_dev_attr)
                if (timer_dev_attr->timer_capability == OMAP_TIMER_SECURE)
                        return ret;

        pdata = kzalloc(sizeof(*pdata), GFP_KERNEL);
        if (!pdata) {
                pr_err("%s: No memory for [%s]\n", __func__, oh->name);
                return -ENOMEM;
        }

        /*
         * Extract the IDs from name field in hwmod database
         * and use the same for constructing ids' for the
         * timer devices. In a way, we are avoiding usage of
         * static variable witin the function to do the same.
         * CAUTION: We have to be careful and make sure the
         * name in hwmod database does not change in which case
         * we might either make corresponding change here or
         * switch back static variable mechanism.
         */
        sscanf(oh->name, "timer%2d", &id);

        if (timer_dev_attr)
                pdata->timer_capability = timer_dev_attr->timer_capability;

        pdata->timer_errata = omap_dm_timer_get_errata();
        pdata->get_context_loss_count = omap_pm_get_dev_context_loss_count;

        pdev = omap_device_build(name, id, oh, pdata, sizeof(*pdata));

        if (IS_ERR(pdev)) {
                pr_err("%s: Can't build omap_device for %s: %s.\n",
                        __func__, name, oh->name);
                ret = -EINVAL;
        }

        kfree(pdata);

        return ret;
}

/**
 * omap2_dm_timer_init - top level regular device initialization
 *
 * Uses dedicated hwmod api to parse through hwmod database for
 * given class name and then build and register the timer device.
 */
static int __init omap2_dm_timer_init(void)
{
        int ret;

        /* If dtb is there, the devices will be created dynamically */
        if (of_have_populated_dt())
                return -ENODEV;

        ret = omap_hwmod_for_each_by_class("timer", omap_timer_init, NULL);
        if (unlikely(ret)) {
                pr_err("%s: device registration failed.\n", __func__);
                return -EINVAL;
        }

        return 0;
}
omap_arch_initcall(omap2_dm_timer_init);

/**
 * omap2_override_clocksource - clocksource override with user configuration
 *
 * Allows user to override default clocksource, using kernel parameter
 *   clocksource="gp_timer"     (For all OMAP2PLUS architectures)
 *
 * Note that, here we are using same standard kernel parameter "clocksource=",
 * and not introducing any OMAP specific interface.
 */
static int __init omap2_override_clocksource(char *str)
{
        if (!str)
                return 0;
        /*
         * For OMAP architecture, we only have two options
         *    - sync_32k (default)
         *    - gp_timer (sys_clk based)
         */
        if (!strcmp(str, "gp_timer"))
                use_gptimer_clksrc = true;

        return 0;
}
early_param("clocksource", omap2_override_clocksource);