1 * Solomon SSD1307 Framebuffer Driver
4 - compatible: Should be "solomon,<chip>fb-<bus>". The only supported bus for
5 now is i2c, and the supported chips are ssd1306 and ssd1307.
6 - reg: Should contain address of the controller on the I2C bus. Most likely
8 - pwm: Should contain the pwm to use according to the OF device tree PWM
9 specification [0]. Only required for the ssd1307.
10 - reset-gpios: Should contain the GPIO used to reset the OLED display
11 - solomon,height: Height in pixel of the screen driven by the controller
12 - solomon,width: Width in pixel of the screen driven by the controller
13 - solomon,page-offset: Offset of pages (band of 8 pixels) that the screen is
17 - reset-active-low: Is the reset gpio is active on physical low?
19 [0]: Documentation/devicetree/bindings/pwm/pwm.txt
23 compatible = "solomon,ssd1307fb-i2c";
26 reset-gpios = <&gpio2 7>;