2 * arch/arm/mach-at91/include/mach/at91_adc.h
4 * Copyright (C) SAN People
6 * Analog-to-Digital Converter (ADC) registers.
7 * Based on AT91SAM9260 datasheet revision D.
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License as published by
11 * the Free Software Foundation; either version 2 of the License, or
12 * (at your option) any later version.
18 #define AT91_ADC_CR 0x00 /* Control Register */
19 #define AT91_ADC_SWRST (1 << 0) /* Software Reset */
20 #define AT91_ADC_START (1 << 1) /* Start Conversion */
22 #define AT91_ADC_MR 0x04 /* Mode Register */
23 #define AT91_ADC_TRGEN (1 << 0) /* Trigger Enable */
24 #define AT91_ADC_TRGSEL (7 << 1) /* Trigger Selection */
25 #define AT91_ADC_TRGSEL_TC0 (0 << 1)
26 #define AT91_ADC_TRGSEL_TC1 (1 << 1)
27 #define AT91_ADC_TRGSEL_TC2 (2 << 1)
28 #define AT91_ADC_TRGSEL_EXTERNAL (6 << 1)
29 #define AT91_ADC_LOWRES (1 << 4) /* Low Resolution */
30 #define AT91_ADC_SLEEP (1 << 5) /* Sleep Mode */
31 #define AT91_ADC_PRESCAL_9260 (0x3f << 8) /* Prescalar Rate Selection */
32 #define AT91_ADC_PRESCAL_9G45 (0xff << 8)
33 #define AT91_ADC_PRESCAL_(x) ((x) << 8)
34 #define AT91_ADC_STARTUP_9260 (0x1f << 16) /* Startup Up Time */
35 #define AT91_ADC_STARTUP_9G45 (0x7f << 16)
36 #define AT91_ADC_STARTUP_9X5 (0xf << 16)
37 #define AT91_ADC_STARTUP_(x) ((x) << 16)
38 #define AT91_ADC_SHTIM (0xf << 24) /* Sample & Hold Time */
39 #define AT91_ADC_SHTIM_(x) ((x) << 24)
41 #define AT91_ADC_CHER 0x10 /* Channel Enable Register */
42 #define AT91_ADC_CHDR 0x14 /* Channel Disable Register */
43 #define AT91_ADC_CHSR 0x18 /* Channel Status Register */
44 #define AT91_ADC_CH(n) (1 << (n)) /* Channel Number */
46 #define AT91_ADC_SR 0x1C /* Status Register */
47 #define AT91_ADC_EOC(n) (1 << (n)) /* End of Conversion on Channel N */
48 #define AT91_ADC_OVRE(n) (1 << ((n) + 8))/* Overrun Error on Channel N */
49 #define AT91_ADC_DRDY (1 << 16) /* Data Ready */
50 #define AT91_ADC_GOVRE (1 << 17) /* General Overrun Error */
51 #define AT91_ADC_ENDRX (1 << 18) /* End of RX Buffer */
52 #define AT91_ADC_RXFUFF (1 << 19) /* RX Buffer Full */
54 #define AT91_ADC_SR_9X5 0x30 /* Status Register for 9x5 */
55 #define AT91_ADC_SR_DRDY_9X5 (1 << 24) /* Data Ready */
57 #define AT91_ADC_LCDR 0x20 /* Last Converted Data Register */
58 #define AT91_ADC_LDATA (0x3ff)
60 #define AT91_ADC_IER 0x24 /* Interrupt Enable Register */
61 #define AT91_ADC_IDR 0x28 /* Interrupt Disable Register */
62 #define AT91_ADC_IMR 0x2C /* Interrupt Mask Register */
64 #define AT91_ADC_CHR(n) (0x30 + ((n) * 4)) /* Channel Data Register N */
65 #define AT91_ADC_DATA (0x3ff)
67 #define AT91_ADC_CDR0_9X5 (0x50) /* Channel Data Register 0 for 9X5 */
69 #define AT91_ADC_TRGR_9260 AT91_ADC_MR
70 #define AT91_ADC_TRGR_9G45 0x08
71 #define AT91_ADC_TRGR_9X5 0xC0