x86/xen: resume timer irqs early
[linux/fpc-iii.git] / arch / arm / mach-davinci / board-da850-evm.c
blobdd1fb24521aa85b16baa9d200b40d28774591cfc
1 /*
2 * TI DA850/OMAP-L138 EVM board
4 * Copyright (C) 2009 Texas Instruments Incorporated - http://www.ti.com/
6 * Derived from: arch/arm/mach-davinci/board-da830-evm.c
7 * Original Copyrights follow:
9 * 2007, 2009 (c) MontaVista Software, Inc. This file is licensed under
10 * the terms of the GNU General Public License version 2. This program
11 * is licensed "as is" without any warranty of any kind, whether express
12 * or implied.
14 #include <linux/console.h>
15 #include <linux/delay.h>
16 #include <linux/gpio.h>
17 #include <linux/gpio_keys.h>
18 #include <linux/init.h>
19 #include <linux/kernel.h>
20 #include <linux/i2c.h>
21 #include <linux/i2c/at24.h>
22 #include <linux/platform_data/pca953x.h>
23 #include <linux/input.h>
24 #include <linux/input/tps6507x-ts.h>
25 #include <linux/mfd/tps6507x.h>
26 #include <linux/mtd/mtd.h>
27 #include <linux/mtd/nand.h>
28 #include <linux/mtd/partitions.h>
29 #include <linux/mtd/physmap.h>
30 #include <linux/platform_device.h>
31 #include <linux/platform_data/mtd-davinci.h>
32 #include <linux/platform_data/mtd-davinci-aemif.h>
33 #include <linux/platform_data/spi-davinci.h>
34 #include <linux/platform_data/uio_pruss.h>
35 #include <linux/regulator/machine.h>
36 #include <linux/regulator/tps6507x.h>
37 #include <linux/spi/spi.h>
38 #include <linux/spi/flash.h>
39 #include <linux/wl12xx.h>
41 #include <mach/cp_intc.h>
42 #include <mach/da8xx.h>
43 #include <mach/mux.h>
44 #include <mach/sram.h>
46 #include <asm/mach-types.h>
47 #include <asm/mach/arch.h>
48 #include <asm/system_info.h>
50 #include <media/tvp514x.h>
51 #include <media/adv7343.h>
53 #define DA850_EVM_PHY_ID "davinci_mdio-0:00"
54 #define DA850_LCD_PWR_PIN GPIO_TO_PIN(2, 8)
55 #define DA850_LCD_BL_PIN GPIO_TO_PIN(2, 15)
57 #define DA850_MMCSD_CD_PIN GPIO_TO_PIN(4, 0)
58 #define DA850_MMCSD_WP_PIN GPIO_TO_PIN(4, 1)
60 #define DA850_WLAN_EN GPIO_TO_PIN(6, 9)
61 #define DA850_WLAN_IRQ GPIO_TO_PIN(6, 10)
63 #define DA850_MII_MDIO_CLKEN_PIN GPIO_TO_PIN(2, 6)
65 static struct mtd_partition da850evm_spiflash_part[] = {
66 [0] = {
67 .name = "UBL",
68 .offset = 0,
69 .size = SZ_64K,
70 .mask_flags = MTD_WRITEABLE,
72 [1] = {
73 .name = "U-Boot",
74 .offset = MTDPART_OFS_APPEND,
75 .size = SZ_512K,
76 .mask_flags = MTD_WRITEABLE,
78 [2] = {
79 .name = "U-Boot-Env",
80 .offset = MTDPART_OFS_APPEND,
81 .size = SZ_64K,
82 .mask_flags = MTD_WRITEABLE,
84 [3] = {
85 .name = "Kernel",
86 .offset = MTDPART_OFS_APPEND,
87 .size = SZ_2M + SZ_512K,
88 .mask_flags = 0,
90 [4] = {
91 .name = "Filesystem",
92 .offset = MTDPART_OFS_APPEND,
93 .size = SZ_4M,
94 .mask_flags = 0,
96 [5] = {
97 .name = "MAC-Address",
98 .offset = SZ_8M - SZ_64K,
99 .size = SZ_64K,
100 .mask_flags = MTD_WRITEABLE,
104 static struct flash_platform_data da850evm_spiflash_data = {
105 .name = "m25p80",
106 .parts = da850evm_spiflash_part,
107 .nr_parts = ARRAY_SIZE(da850evm_spiflash_part),
108 .type = "m25p64",
111 static struct davinci_spi_config da850evm_spiflash_cfg = {
112 .io_type = SPI_IO_TYPE_DMA,
113 .c2tdelay = 8,
114 .t2cdelay = 8,
117 static struct spi_board_info da850evm_spi_info[] = {
119 .modalias = "m25p80",
120 .platform_data = &da850evm_spiflash_data,
121 .controller_data = &da850evm_spiflash_cfg,
122 .mode = SPI_MODE_0,
123 .max_speed_hz = 30000000,
124 .bus_num = 1,
125 .chip_select = 0,
129 #ifdef CONFIG_MTD
130 static void da850_evm_m25p80_notify_add(struct mtd_info *mtd)
132 char *mac_addr = davinci_soc_info.emac_pdata->mac_addr;
133 size_t retlen;
135 if (!strcmp(mtd->name, "MAC-Address")) {
136 mtd_read(mtd, 0, ETH_ALEN, &retlen, mac_addr);
137 if (retlen == ETH_ALEN)
138 pr_info("Read MAC addr from SPI Flash: %pM\n",
139 mac_addr);
143 static struct mtd_notifier da850evm_spi_notifier = {
144 .add = da850_evm_m25p80_notify_add,
147 static void da850_evm_setup_mac_addr(void)
149 register_mtd_user(&da850evm_spi_notifier);
151 #else
152 static void da850_evm_setup_mac_addr(void) { }
153 #endif
155 static struct mtd_partition da850_evm_norflash_partition[] = {
157 .name = "bootloaders + env",
158 .offset = 0,
159 .size = SZ_512K,
160 .mask_flags = MTD_WRITEABLE,
163 .name = "kernel",
164 .offset = MTDPART_OFS_APPEND,
165 .size = SZ_2M,
166 .mask_flags = 0,
169 .name = "filesystem",
170 .offset = MTDPART_OFS_APPEND,
171 .size = MTDPART_SIZ_FULL,
172 .mask_flags = 0,
176 static struct physmap_flash_data da850_evm_norflash_data = {
177 .width = 2,
178 .parts = da850_evm_norflash_partition,
179 .nr_parts = ARRAY_SIZE(da850_evm_norflash_partition),
182 static struct resource da850_evm_norflash_resource[] = {
184 .start = DA8XX_AEMIF_CS2_BASE,
185 .end = DA8XX_AEMIF_CS2_BASE + SZ_32M - 1,
186 .flags = IORESOURCE_MEM,
190 static struct platform_device da850_evm_norflash_device = {
191 .name = "physmap-flash",
192 .id = 0,
193 .dev = {
194 .platform_data = &da850_evm_norflash_data,
196 .num_resources = 1,
197 .resource = da850_evm_norflash_resource,
200 static struct davinci_pm_config da850_pm_pdata = {
201 .sleepcount = 128,
204 static struct platform_device da850_pm_device = {
205 .name = "pm-davinci",
206 .dev = {
207 .platform_data = &da850_pm_pdata,
209 .id = -1,
212 /* DA850/OMAP-L138 EVM includes a 512 MByte large-page NAND flash
213 * (128K blocks). It may be used instead of the (default) SPI flash
214 * to boot, using TI's tools to install the secondary boot loader
215 * (UBL) and U-Boot.
217 static struct mtd_partition da850_evm_nandflash_partition[] = {
219 .name = "u-boot env",
220 .offset = 0,
221 .size = SZ_128K,
222 .mask_flags = MTD_WRITEABLE,
225 .name = "UBL",
226 .offset = MTDPART_OFS_APPEND,
227 .size = SZ_128K,
228 .mask_flags = MTD_WRITEABLE,
231 .name = "u-boot",
232 .offset = MTDPART_OFS_APPEND,
233 .size = 4 * SZ_128K,
234 .mask_flags = MTD_WRITEABLE,
237 .name = "kernel",
238 .offset = 0x200000,
239 .size = SZ_2M,
240 .mask_flags = 0,
243 .name = "filesystem",
244 .offset = MTDPART_OFS_APPEND,
245 .size = MTDPART_SIZ_FULL,
246 .mask_flags = 0,
250 static struct davinci_aemif_timing da850_evm_nandflash_timing = {
251 .wsetup = 24,
252 .wstrobe = 21,
253 .whold = 14,
254 .rsetup = 19,
255 .rstrobe = 50,
256 .rhold = 0,
257 .ta = 20,
260 static struct davinci_nand_pdata da850_evm_nandflash_data = {
261 .parts = da850_evm_nandflash_partition,
262 .nr_parts = ARRAY_SIZE(da850_evm_nandflash_partition),
263 .ecc_mode = NAND_ECC_HW,
264 .ecc_bits = 4,
265 .bbt_options = NAND_BBT_USE_FLASH,
266 .timing = &da850_evm_nandflash_timing,
269 static struct resource da850_evm_nandflash_resource[] = {
271 .start = DA8XX_AEMIF_CS3_BASE,
272 .end = DA8XX_AEMIF_CS3_BASE + SZ_512K + 2 * SZ_1K - 1,
273 .flags = IORESOURCE_MEM,
276 .start = DA8XX_AEMIF_CTL_BASE,
277 .end = DA8XX_AEMIF_CTL_BASE + SZ_32K - 1,
278 .flags = IORESOURCE_MEM,
282 static struct platform_device da850_evm_nandflash_device = {
283 .name = "davinci_nand",
284 .id = 1,
285 .dev = {
286 .platform_data = &da850_evm_nandflash_data,
288 .num_resources = ARRAY_SIZE(da850_evm_nandflash_resource),
289 .resource = da850_evm_nandflash_resource,
292 static struct platform_device *da850_evm_devices[] = {
293 &da850_evm_nandflash_device,
294 &da850_evm_norflash_device,
297 #define DA8XX_AEMIF_CE2CFG_OFFSET 0x10
298 #define DA8XX_AEMIF_ASIZE_16BIT 0x1
300 static void __init da850_evm_init_nor(void)
302 void __iomem *aemif_addr;
304 aemif_addr = ioremap(DA8XX_AEMIF_CTL_BASE, SZ_32K);
306 /* Configure data bus width of CS2 to 16 bit */
307 writel(readl(aemif_addr + DA8XX_AEMIF_CE2CFG_OFFSET) |
308 DA8XX_AEMIF_ASIZE_16BIT,
309 aemif_addr + DA8XX_AEMIF_CE2CFG_OFFSET);
311 iounmap(aemif_addr);
314 static const short da850_evm_nand_pins[] = {
315 DA850_EMA_D_0, DA850_EMA_D_1, DA850_EMA_D_2, DA850_EMA_D_3,
316 DA850_EMA_D_4, DA850_EMA_D_5, DA850_EMA_D_6, DA850_EMA_D_7,
317 DA850_EMA_A_1, DA850_EMA_A_2, DA850_NEMA_CS_3, DA850_NEMA_CS_4,
318 DA850_NEMA_WE, DA850_NEMA_OE,
322 static const short da850_evm_nor_pins[] = {
323 DA850_EMA_BA_1, DA850_EMA_CLK, DA850_EMA_WAIT_1, DA850_NEMA_CS_2,
324 DA850_NEMA_WE, DA850_NEMA_OE, DA850_EMA_D_0, DA850_EMA_D_1,
325 DA850_EMA_D_2, DA850_EMA_D_3, DA850_EMA_D_4, DA850_EMA_D_5,
326 DA850_EMA_D_6, DA850_EMA_D_7, DA850_EMA_D_8, DA850_EMA_D_9,
327 DA850_EMA_D_10, DA850_EMA_D_11, DA850_EMA_D_12, DA850_EMA_D_13,
328 DA850_EMA_D_14, DA850_EMA_D_15, DA850_EMA_A_0, DA850_EMA_A_1,
329 DA850_EMA_A_2, DA850_EMA_A_3, DA850_EMA_A_4, DA850_EMA_A_5,
330 DA850_EMA_A_6, DA850_EMA_A_7, DA850_EMA_A_8, DA850_EMA_A_9,
331 DA850_EMA_A_10, DA850_EMA_A_11, DA850_EMA_A_12, DA850_EMA_A_13,
332 DA850_EMA_A_14, DA850_EMA_A_15, DA850_EMA_A_16, DA850_EMA_A_17,
333 DA850_EMA_A_18, DA850_EMA_A_19, DA850_EMA_A_20, DA850_EMA_A_21,
334 DA850_EMA_A_22, DA850_EMA_A_23,
338 #define HAS_MMC IS_ENABLED(CONFIG_MMC_DAVINCI)
340 static inline void da850_evm_setup_nor_nand(void)
342 int ret = 0;
344 if (!HAS_MMC) {
345 ret = davinci_cfg_reg_list(da850_evm_nand_pins);
346 if (ret)
347 pr_warn("%s: NAND mux setup failed: %d\n",
348 __func__, ret);
350 ret = davinci_cfg_reg_list(da850_evm_nor_pins);
351 if (ret)
352 pr_warn("%s: NOR mux setup failed: %d\n",
353 __func__, ret);
355 da850_evm_init_nor();
357 platform_add_devices(da850_evm_devices,
358 ARRAY_SIZE(da850_evm_devices));
362 #ifdef CONFIG_DA850_UI_RMII
363 static inline void da850_evm_setup_emac_rmii(int rmii_sel)
365 struct davinci_soc_info *soc_info = &davinci_soc_info;
367 soc_info->emac_pdata->rmii_en = 1;
368 gpio_set_value_cansleep(rmii_sel, 0);
370 #else
371 static inline void da850_evm_setup_emac_rmii(int rmii_sel) { }
372 #endif
375 #define DA850_KEYS_DEBOUNCE_MS 10
377 * At 200ms polling interval it is possible to miss an
378 * event by tapping very lightly on the push button but most
379 * pushes do result in an event; longer intervals require the
380 * user to hold the button whereas shorter intervals require
381 * more CPU time for polling.
383 #define DA850_GPIO_KEYS_POLL_MS 200
385 enum da850_evm_ui_exp_pins {
386 DA850_EVM_UI_EXP_SEL_C = 5,
387 DA850_EVM_UI_EXP_SEL_B,
388 DA850_EVM_UI_EXP_SEL_A,
389 DA850_EVM_UI_EXP_PB8,
390 DA850_EVM_UI_EXP_PB7,
391 DA850_EVM_UI_EXP_PB6,
392 DA850_EVM_UI_EXP_PB5,
393 DA850_EVM_UI_EXP_PB4,
394 DA850_EVM_UI_EXP_PB3,
395 DA850_EVM_UI_EXP_PB2,
396 DA850_EVM_UI_EXP_PB1,
399 static const char * const da850_evm_ui_exp[] = {
400 [DA850_EVM_UI_EXP_SEL_C] = "sel_c",
401 [DA850_EVM_UI_EXP_SEL_B] = "sel_b",
402 [DA850_EVM_UI_EXP_SEL_A] = "sel_a",
403 [DA850_EVM_UI_EXP_PB8] = "pb8",
404 [DA850_EVM_UI_EXP_PB7] = "pb7",
405 [DA850_EVM_UI_EXP_PB6] = "pb6",
406 [DA850_EVM_UI_EXP_PB5] = "pb5",
407 [DA850_EVM_UI_EXP_PB4] = "pb4",
408 [DA850_EVM_UI_EXP_PB3] = "pb3",
409 [DA850_EVM_UI_EXP_PB2] = "pb2",
410 [DA850_EVM_UI_EXP_PB1] = "pb1",
413 #define DA850_N_UI_PB 8
415 static struct gpio_keys_button da850_evm_ui_keys[] = {
416 [0 ... DA850_N_UI_PB - 1] = {
417 .type = EV_KEY,
418 .active_low = 1,
419 .wakeup = 0,
420 .debounce_interval = DA850_KEYS_DEBOUNCE_MS,
421 .code = -1, /* assigned at runtime */
422 .gpio = -1, /* assigned at runtime */
423 .desc = NULL, /* assigned at runtime */
427 static struct gpio_keys_platform_data da850_evm_ui_keys_pdata = {
428 .buttons = da850_evm_ui_keys,
429 .nbuttons = ARRAY_SIZE(da850_evm_ui_keys),
430 .poll_interval = DA850_GPIO_KEYS_POLL_MS,
433 static struct platform_device da850_evm_ui_keys_device = {
434 .name = "gpio-keys-polled",
435 .id = 0,
436 .dev = {
437 .platform_data = &da850_evm_ui_keys_pdata
441 static void da850_evm_ui_keys_init(unsigned gpio)
443 int i;
444 struct gpio_keys_button *button;
446 for (i = 0; i < DA850_N_UI_PB; i++) {
447 button = &da850_evm_ui_keys[i];
448 button->code = KEY_F8 - i;
449 button->desc = (char *)
450 da850_evm_ui_exp[DA850_EVM_UI_EXP_PB8 + i];
451 button->gpio = gpio + DA850_EVM_UI_EXP_PB8 + i;
455 #ifdef CONFIG_DA850_UI_SD_VIDEO_PORT
456 static inline void da850_evm_setup_video_port(int video_sel)
458 gpio_set_value_cansleep(video_sel, 0);
460 #else
461 static inline void da850_evm_setup_video_port(int video_sel) { }
462 #endif
464 static int da850_evm_ui_expander_setup(struct i2c_client *client, unsigned gpio,
465 unsigned ngpio, void *c)
467 int sel_a, sel_b, sel_c, ret;
469 sel_a = gpio + DA850_EVM_UI_EXP_SEL_A;
470 sel_b = gpio + DA850_EVM_UI_EXP_SEL_B;
471 sel_c = gpio + DA850_EVM_UI_EXP_SEL_C;
473 ret = gpio_request(sel_a, da850_evm_ui_exp[DA850_EVM_UI_EXP_SEL_A]);
474 if (ret) {
475 pr_warn("Cannot open UI expander pin %d\n", sel_a);
476 goto exp_setup_sela_fail;
479 ret = gpio_request(sel_b, da850_evm_ui_exp[DA850_EVM_UI_EXP_SEL_B]);
480 if (ret) {
481 pr_warn("Cannot open UI expander pin %d\n", sel_b);
482 goto exp_setup_selb_fail;
485 ret = gpio_request(sel_c, da850_evm_ui_exp[DA850_EVM_UI_EXP_SEL_C]);
486 if (ret) {
487 pr_warn("Cannot open UI expander pin %d\n", sel_c);
488 goto exp_setup_selc_fail;
491 /* deselect all functionalities */
492 gpio_direction_output(sel_a, 1);
493 gpio_direction_output(sel_b, 1);
494 gpio_direction_output(sel_c, 1);
496 da850_evm_ui_keys_init(gpio);
497 ret = platform_device_register(&da850_evm_ui_keys_device);
498 if (ret) {
499 pr_warn("Could not register UI GPIO expander push-buttons");
500 goto exp_setup_keys_fail;
503 pr_info("DA850/OMAP-L138 EVM UI card detected\n");
505 da850_evm_setup_nor_nand();
507 da850_evm_setup_emac_rmii(sel_a);
509 da850_evm_setup_video_port(sel_c);
511 return 0;
513 exp_setup_keys_fail:
514 gpio_free(sel_c);
515 exp_setup_selc_fail:
516 gpio_free(sel_b);
517 exp_setup_selb_fail:
518 gpio_free(sel_a);
519 exp_setup_sela_fail:
520 return ret;
523 static int da850_evm_ui_expander_teardown(struct i2c_client *client,
524 unsigned gpio, unsigned ngpio, void *c)
526 platform_device_unregister(&da850_evm_ui_keys_device);
528 /* deselect all functionalities */
529 gpio_set_value_cansleep(gpio + DA850_EVM_UI_EXP_SEL_C, 1);
530 gpio_set_value_cansleep(gpio + DA850_EVM_UI_EXP_SEL_B, 1);
531 gpio_set_value_cansleep(gpio + DA850_EVM_UI_EXP_SEL_A, 1);
533 gpio_free(gpio + DA850_EVM_UI_EXP_SEL_C);
534 gpio_free(gpio + DA850_EVM_UI_EXP_SEL_B);
535 gpio_free(gpio + DA850_EVM_UI_EXP_SEL_A);
537 return 0;
540 /* assign the baseboard expander's GPIOs after the UI board's */
541 #define DA850_UI_EXPANDER_N_GPIOS ARRAY_SIZE(da850_evm_ui_exp)
542 #define DA850_BB_EXPANDER_GPIO_BASE (DAVINCI_N_GPIO + DA850_UI_EXPANDER_N_GPIOS)
544 enum da850_evm_bb_exp_pins {
545 DA850_EVM_BB_EXP_DEEP_SLEEP_EN = 0,
546 DA850_EVM_BB_EXP_SW_RST,
547 DA850_EVM_BB_EXP_TP_23,
548 DA850_EVM_BB_EXP_TP_22,
549 DA850_EVM_BB_EXP_TP_21,
550 DA850_EVM_BB_EXP_USER_PB1,
551 DA850_EVM_BB_EXP_USER_LED2,
552 DA850_EVM_BB_EXP_USER_LED1,
553 DA850_EVM_BB_EXP_USER_SW1,
554 DA850_EVM_BB_EXP_USER_SW2,
555 DA850_EVM_BB_EXP_USER_SW3,
556 DA850_EVM_BB_EXP_USER_SW4,
557 DA850_EVM_BB_EXP_USER_SW5,
558 DA850_EVM_BB_EXP_USER_SW6,
559 DA850_EVM_BB_EXP_USER_SW7,
560 DA850_EVM_BB_EXP_USER_SW8
563 static const char * const da850_evm_bb_exp[] = {
564 [DA850_EVM_BB_EXP_DEEP_SLEEP_EN] = "deep_sleep_en",
565 [DA850_EVM_BB_EXP_SW_RST] = "sw_rst",
566 [DA850_EVM_BB_EXP_TP_23] = "tp_23",
567 [DA850_EVM_BB_EXP_TP_22] = "tp_22",
568 [DA850_EVM_BB_EXP_TP_21] = "tp_21",
569 [DA850_EVM_BB_EXP_USER_PB1] = "user_pb1",
570 [DA850_EVM_BB_EXP_USER_LED2] = "user_led2",
571 [DA850_EVM_BB_EXP_USER_LED1] = "user_led1",
572 [DA850_EVM_BB_EXP_USER_SW1] = "user_sw1",
573 [DA850_EVM_BB_EXP_USER_SW2] = "user_sw2",
574 [DA850_EVM_BB_EXP_USER_SW3] = "user_sw3",
575 [DA850_EVM_BB_EXP_USER_SW4] = "user_sw4",
576 [DA850_EVM_BB_EXP_USER_SW5] = "user_sw5",
577 [DA850_EVM_BB_EXP_USER_SW6] = "user_sw6",
578 [DA850_EVM_BB_EXP_USER_SW7] = "user_sw7",
579 [DA850_EVM_BB_EXP_USER_SW8] = "user_sw8",
582 #define DA850_N_BB_USER_SW 8
584 static struct gpio_keys_button da850_evm_bb_keys[] = {
585 [0] = {
586 .type = EV_KEY,
587 .active_low = 1,
588 .wakeup = 0,
589 .debounce_interval = DA850_KEYS_DEBOUNCE_MS,
590 .code = KEY_PROG1,
591 .desc = NULL, /* assigned at runtime */
592 .gpio = -1, /* assigned at runtime */
594 [1 ... DA850_N_BB_USER_SW] = {
595 .type = EV_SW,
596 .active_low = 1,
597 .wakeup = 0,
598 .debounce_interval = DA850_KEYS_DEBOUNCE_MS,
599 .code = -1, /* assigned at runtime */
600 .desc = NULL, /* assigned at runtime */
601 .gpio = -1, /* assigned at runtime */
605 static struct gpio_keys_platform_data da850_evm_bb_keys_pdata = {
606 .buttons = da850_evm_bb_keys,
607 .nbuttons = ARRAY_SIZE(da850_evm_bb_keys),
608 .poll_interval = DA850_GPIO_KEYS_POLL_MS,
611 static struct platform_device da850_evm_bb_keys_device = {
612 .name = "gpio-keys-polled",
613 .id = 1,
614 .dev = {
615 .platform_data = &da850_evm_bb_keys_pdata
619 static void da850_evm_bb_keys_init(unsigned gpio)
621 int i;
622 struct gpio_keys_button *button;
624 button = &da850_evm_bb_keys[0];
625 button->desc = (char *)
626 da850_evm_bb_exp[DA850_EVM_BB_EXP_USER_PB1];
627 button->gpio = gpio + DA850_EVM_BB_EXP_USER_PB1;
629 for (i = 0; i < DA850_N_BB_USER_SW; i++) {
630 button = &da850_evm_bb_keys[i + 1];
631 button->code = SW_LID + i;
632 button->desc = (char *)
633 da850_evm_bb_exp[DA850_EVM_BB_EXP_USER_SW1 + i];
634 button->gpio = gpio + DA850_EVM_BB_EXP_USER_SW1 + i;
638 #define DA850_N_BB_USER_LED 2
640 static struct gpio_led da850_evm_bb_leds[] = {
641 [0 ... DA850_N_BB_USER_LED - 1] = {
642 .active_low = 1,
643 .gpio = -1, /* assigned at runtime */
644 .name = NULL, /* assigned at runtime */
648 static struct gpio_led_platform_data da850_evm_bb_leds_pdata = {
649 .leds = da850_evm_bb_leds,
650 .num_leds = ARRAY_SIZE(da850_evm_bb_leds),
653 static struct platform_device da850_evm_bb_leds_device = {
654 .name = "leds-gpio",
655 .id = -1,
656 .dev = {
657 .platform_data = &da850_evm_bb_leds_pdata
661 static void da850_evm_bb_leds_init(unsigned gpio)
663 int i;
664 struct gpio_led *led;
666 for (i = 0; i < DA850_N_BB_USER_LED; i++) {
667 led = &da850_evm_bb_leds[i];
669 led->gpio = gpio + DA850_EVM_BB_EXP_USER_LED2 + i;
670 led->name =
671 da850_evm_bb_exp[DA850_EVM_BB_EXP_USER_LED2 + i];
675 static int da850_evm_bb_expander_setup(struct i2c_client *client,
676 unsigned gpio, unsigned ngpio,
677 void *c)
679 int ret;
682 * Register the switches and pushbutton on the baseboard as a gpio-keys
683 * device.
685 da850_evm_bb_keys_init(gpio);
686 ret = platform_device_register(&da850_evm_bb_keys_device);
687 if (ret) {
688 pr_warn("Could not register baseboard GPIO expander keys");
689 goto io_exp_setup_sw_fail;
692 da850_evm_bb_leds_init(gpio);
693 ret = platform_device_register(&da850_evm_bb_leds_device);
694 if (ret) {
695 pr_warn("Could not register baseboard GPIO expander LEDs");
696 goto io_exp_setup_leds_fail;
699 return 0;
701 io_exp_setup_leds_fail:
702 platform_device_unregister(&da850_evm_bb_keys_device);
703 io_exp_setup_sw_fail:
704 return ret;
707 static int da850_evm_bb_expander_teardown(struct i2c_client *client,
708 unsigned gpio, unsigned ngpio, void *c)
710 platform_device_unregister(&da850_evm_bb_leds_device);
711 platform_device_unregister(&da850_evm_bb_keys_device);
713 return 0;
716 static struct pca953x_platform_data da850_evm_ui_expander_info = {
717 .gpio_base = DAVINCI_N_GPIO,
718 .setup = da850_evm_ui_expander_setup,
719 .teardown = da850_evm_ui_expander_teardown,
720 .names = da850_evm_ui_exp,
723 static struct pca953x_platform_data da850_evm_bb_expander_info = {
724 .gpio_base = DA850_BB_EXPANDER_GPIO_BASE,
725 .setup = da850_evm_bb_expander_setup,
726 .teardown = da850_evm_bb_expander_teardown,
727 .names = da850_evm_bb_exp,
730 static struct i2c_board_info __initdata da850_evm_i2c_devices[] = {
732 I2C_BOARD_INFO("tlv320aic3x", 0x18),
735 I2C_BOARD_INFO("tca6416", 0x20),
736 .platform_data = &da850_evm_ui_expander_info,
739 I2C_BOARD_INFO("tca6416", 0x21),
740 .platform_data = &da850_evm_bb_expander_info,
744 static struct davinci_i2c_platform_data da850_evm_i2c_0_pdata = {
745 .bus_freq = 100, /* kHz */
746 .bus_delay = 0, /* usec */
749 /* davinci da850 evm audio machine driver */
750 static u8 da850_iis_serializer_direction[] = {
751 INACTIVE_MODE, INACTIVE_MODE, INACTIVE_MODE, INACTIVE_MODE,
752 INACTIVE_MODE, INACTIVE_MODE, INACTIVE_MODE, INACTIVE_MODE,
753 INACTIVE_MODE, INACTIVE_MODE, INACTIVE_MODE, TX_MODE,
754 RX_MODE, INACTIVE_MODE, INACTIVE_MODE, INACTIVE_MODE,
757 static struct snd_platform_data da850_evm_snd_data = {
758 .tx_dma_offset = 0x2000,
759 .rx_dma_offset = 0x2000,
760 .op_mode = DAVINCI_MCASP_IIS_MODE,
761 .num_serializer = ARRAY_SIZE(da850_iis_serializer_direction),
762 .tdm_slots = 2,
763 .serial_dir = da850_iis_serializer_direction,
764 .asp_chan_q = EVENTQ_0,
765 .ram_chan_q = EVENTQ_1,
766 .version = MCASP_VERSION_2,
767 .txnumevt = 1,
768 .rxnumevt = 1,
769 .sram_size_playback = SZ_8K,
770 .sram_size_capture = SZ_8K,
773 static const short da850_evm_mcasp_pins[] __initconst = {
774 DA850_AHCLKX, DA850_ACLKX, DA850_AFSX,
775 DA850_AHCLKR, DA850_ACLKR, DA850_AFSR, DA850_AMUTE,
776 DA850_AXR_11, DA850_AXR_12,
780 static int da850_evm_mmc_get_ro(int index)
782 return gpio_get_value(DA850_MMCSD_WP_PIN);
785 static int da850_evm_mmc_get_cd(int index)
787 return !gpio_get_value(DA850_MMCSD_CD_PIN);
790 static struct davinci_mmc_config da850_mmc_config = {
791 .get_ro = da850_evm_mmc_get_ro,
792 .get_cd = da850_evm_mmc_get_cd,
793 .wires = 4,
794 .max_freq = 50000000,
795 .caps = MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED,
798 static const short da850_evm_mmcsd0_pins[] __initconst = {
799 DA850_MMCSD0_DAT_0, DA850_MMCSD0_DAT_1, DA850_MMCSD0_DAT_2,
800 DA850_MMCSD0_DAT_3, DA850_MMCSD0_CLK, DA850_MMCSD0_CMD,
801 DA850_GPIO4_0, DA850_GPIO4_1,
805 static void da850_panel_power_ctrl(int val)
807 /* lcd backlight */
808 gpio_set_value(DA850_LCD_BL_PIN, val);
810 /* lcd power */
811 gpio_set_value(DA850_LCD_PWR_PIN, val);
814 static int da850_lcd_hw_init(void)
816 int status;
818 status = gpio_request(DA850_LCD_BL_PIN, "lcd bl\n");
819 if (status < 0)
820 return status;
822 status = gpio_request(DA850_LCD_PWR_PIN, "lcd pwr\n");
823 if (status < 0) {
824 gpio_free(DA850_LCD_BL_PIN);
825 return status;
828 gpio_direction_output(DA850_LCD_BL_PIN, 0);
829 gpio_direction_output(DA850_LCD_PWR_PIN, 0);
831 /* Switch off panel power and backlight */
832 da850_panel_power_ctrl(0);
834 /* Switch on panel power and backlight */
835 da850_panel_power_ctrl(1);
837 return 0;
840 /* TPS65070 voltage regulator support */
842 /* 3.3V */
843 static struct regulator_consumer_supply tps65070_dcdc1_consumers[] = {
845 .supply = "usb0_vdda33",
848 .supply = "usb1_vdda33",
852 /* 3.3V or 1.8V */
853 static struct regulator_consumer_supply tps65070_dcdc2_consumers[] = {
855 .supply = "dvdd3318_a",
858 .supply = "dvdd3318_b",
861 .supply = "dvdd3318_c",
865 /* 1.2V */
866 static struct regulator_consumer_supply tps65070_dcdc3_consumers[] = {
868 .supply = "cvdd",
872 /* 1.8V LDO */
873 static struct regulator_consumer_supply tps65070_ldo1_consumers[] = {
875 .supply = "sata_vddr",
878 .supply = "usb0_vdda18",
881 .supply = "usb1_vdda18",
884 .supply = "ddr_dvdd18",
888 /* 1.2V LDO */
889 static struct regulator_consumer_supply tps65070_ldo2_consumers[] = {
891 .supply = "sata_vdd",
894 .supply = "pll0_vdda",
897 .supply = "pll1_vdda",
900 .supply = "usbs_cvdd",
903 .supply = "vddarnwa1",
907 /* We take advantage of the fact that both defdcdc{2,3} are tied high */
908 static struct tps6507x_reg_platform_data tps6507x_platform_data = {
909 .defdcdc_default = true,
912 static struct regulator_init_data tps65070_regulator_data[] = {
913 /* dcdc1 */
915 .constraints = {
916 .min_uV = 3150000,
917 .max_uV = 3450000,
918 .valid_ops_mask = (REGULATOR_CHANGE_VOLTAGE |
919 REGULATOR_CHANGE_STATUS),
920 .boot_on = 1,
922 .num_consumer_supplies = ARRAY_SIZE(tps65070_dcdc1_consumers),
923 .consumer_supplies = tps65070_dcdc1_consumers,
926 /* dcdc2 */
928 .constraints = {
929 .min_uV = 1710000,
930 .max_uV = 3450000,
931 .valid_ops_mask = (REGULATOR_CHANGE_VOLTAGE |
932 REGULATOR_CHANGE_STATUS),
933 .boot_on = 1,
935 .num_consumer_supplies = ARRAY_SIZE(tps65070_dcdc2_consumers),
936 .consumer_supplies = tps65070_dcdc2_consumers,
937 .driver_data = &tps6507x_platform_data,
940 /* dcdc3 */
942 .constraints = {
943 .min_uV = 950000,
944 .max_uV = 1350000,
945 .valid_ops_mask = (REGULATOR_CHANGE_VOLTAGE |
946 REGULATOR_CHANGE_STATUS),
947 .boot_on = 1,
949 .num_consumer_supplies = ARRAY_SIZE(tps65070_dcdc3_consumers),
950 .consumer_supplies = tps65070_dcdc3_consumers,
951 .driver_data = &tps6507x_platform_data,
954 /* ldo1 */
956 .constraints = {
957 .min_uV = 1710000,
958 .max_uV = 1890000,
959 .valid_ops_mask = (REGULATOR_CHANGE_VOLTAGE |
960 REGULATOR_CHANGE_STATUS),
961 .boot_on = 1,
963 .num_consumer_supplies = ARRAY_SIZE(tps65070_ldo1_consumers),
964 .consumer_supplies = tps65070_ldo1_consumers,
967 /* ldo2 */
969 .constraints = {
970 .min_uV = 1140000,
971 .max_uV = 1320000,
972 .valid_ops_mask = (REGULATOR_CHANGE_VOLTAGE |
973 REGULATOR_CHANGE_STATUS),
974 .boot_on = 1,
976 .num_consumer_supplies = ARRAY_SIZE(tps65070_ldo2_consumers),
977 .consumer_supplies = tps65070_ldo2_consumers,
981 static struct touchscreen_init_data tps6507x_touchscreen_data = {
982 .poll_period = 30, /* ms between touch samples */
983 .min_pressure = 0x30, /* minimum pressure to trigger touch */
984 .vendor = 0, /* /sys/class/input/input?/id/vendor */
985 .product = 65070, /* /sys/class/input/input?/id/product */
986 .version = 0x100, /* /sys/class/input/input?/id/version */
989 static struct tps6507x_board tps_board = {
990 .tps6507x_pmic_init_data = &tps65070_regulator_data[0],
991 .tps6507x_ts_init_data = &tps6507x_touchscreen_data,
994 static struct i2c_board_info __initdata da850_evm_tps65070_info[] = {
996 I2C_BOARD_INFO("tps6507x", 0x48),
997 .platform_data = &tps_board,
1001 static int __init pmic_tps65070_init(void)
1003 return i2c_register_board_info(1, da850_evm_tps65070_info,
1004 ARRAY_SIZE(da850_evm_tps65070_info));
1007 static const short da850_evm_lcdc_pins[] = {
1008 DA850_GPIO2_8, DA850_GPIO2_15,
1012 static const short da850_evm_mii_pins[] = {
1013 DA850_MII_TXEN, DA850_MII_TXCLK, DA850_MII_COL, DA850_MII_TXD_3,
1014 DA850_MII_TXD_2, DA850_MII_TXD_1, DA850_MII_TXD_0, DA850_MII_RXER,
1015 DA850_MII_CRS, DA850_MII_RXCLK, DA850_MII_RXDV, DA850_MII_RXD_3,
1016 DA850_MII_RXD_2, DA850_MII_RXD_1, DA850_MII_RXD_0, DA850_MDIO_CLK,
1017 DA850_MDIO_D,
1021 static const short da850_evm_rmii_pins[] = {
1022 DA850_RMII_TXD_0, DA850_RMII_TXD_1, DA850_RMII_TXEN,
1023 DA850_RMII_CRS_DV, DA850_RMII_RXD_0, DA850_RMII_RXD_1,
1024 DA850_RMII_RXER, DA850_RMII_MHZ_50_CLK, DA850_MDIO_CLK,
1025 DA850_MDIO_D,
1029 static int __init da850_evm_config_emac(void)
1031 void __iomem *cfg_chip3_base;
1032 int ret;
1033 u32 val;
1034 struct davinci_soc_info *soc_info = &davinci_soc_info;
1035 u8 rmii_en = soc_info->emac_pdata->rmii_en;
1037 if (!machine_is_davinci_da850_evm())
1038 return 0;
1040 cfg_chip3_base = DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP3_REG);
1042 val = __raw_readl(cfg_chip3_base);
1044 if (rmii_en) {
1045 val |= BIT(8);
1046 ret = davinci_cfg_reg_list(da850_evm_rmii_pins);
1047 pr_info("EMAC: RMII PHY configured, MII PHY will not be"
1048 " functional\n");
1049 } else {
1050 val &= ~BIT(8);
1051 ret = davinci_cfg_reg_list(da850_evm_mii_pins);
1052 pr_info("EMAC: MII PHY configured, RMII PHY will not be"
1053 " functional\n");
1056 if (ret)
1057 pr_warn("%s: CPGMAC/RMII mux setup failed: %d\n",
1058 __func__, ret);
1060 /* configure the CFGCHIP3 register for RMII or MII */
1061 __raw_writel(val, cfg_chip3_base);
1063 ret = davinci_cfg_reg(DA850_GPIO2_6);
1064 if (ret)
1065 pr_warn("%s:GPIO(2,6) mux setup failed\n", __func__);
1067 ret = gpio_request(DA850_MII_MDIO_CLKEN_PIN, "mdio_clk_en");
1068 if (ret) {
1069 pr_warn("Cannot open GPIO %d\n", DA850_MII_MDIO_CLKEN_PIN);
1070 return ret;
1073 /* Enable/Disable MII MDIO clock */
1074 gpio_direction_output(DA850_MII_MDIO_CLKEN_PIN, rmii_en);
1076 soc_info->emac_pdata->phy_id = DA850_EVM_PHY_ID;
1078 ret = da8xx_register_emac();
1079 if (ret)
1080 pr_warn("%s: EMAC registration failed: %d\n", __func__, ret);
1082 return 0;
1084 device_initcall(da850_evm_config_emac);
1087 * The following EDMA channels/slots are not being used by drivers (for
1088 * example: Timer, GPIO, UART events etc) on da850/omap-l138 EVM, hence
1089 * they are being reserved for codecs on the DSP side.
1091 static const s16 da850_dma0_rsv_chans[][2] = {
1092 /* (offset, number) */
1093 { 8, 6},
1094 {24, 4},
1095 {30, 2},
1096 {-1, -1}
1099 static const s16 da850_dma0_rsv_slots[][2] = {
1100 /* (offset, number) */
1101 { 8, 6},
1102 {24, 4},
1103 {30, 50},
1104 {-1, -1}
1107 static const s16 da850_dma1_rsv_chans[][2] = {
1108 /* (offset, number) */
1109 { 0, 28},
1110 {30, 2},
1111 {-1, -1}
1114 static const s16 da850_dma1_rsv_slots[][2] = {
1115 /* (offset, number) */
1116 { 0, 28},
1117 {30, 90},
1118 {-1, -1}
1121 static struct edma_rsv_info da850_edma_cc0_rsv = {
1122 .rsv_chans = da850_dma0_rsv_chans,
1123 .rsv_slots = da850_dma0_rsv_slots,
1126 static struct edma_rsv_info da850_edma_cc1_rsv = {
1127 .rsv_chans = da850_dma1_rsv_chans,
1128 .rsv_slots = da850_dma1_rsv_slots,
1131 static struct edma_rsv_info *da850_edma_rsv[2] = {
1132 &da850_edma_cc0_rsv,
1133 &da850_edma_cc1_rsv,
1136 #ifdef CONFIG_CPU_FREQ
1137 static __init int da850_evm_init_cpufreq(void)
1139 switch (system_rev & 0xF) {
1140 case 3:
1141 da850_max_speed = 456000;
1142 break;
1143 case 2:
1144 da850_max_speed = 408000;
1145 break;
1146 case 1:
1147 da850_max_speed = 372000;
1148 break;
1151 return da850_register_cpufreq("pll0_sysclk3");
1153 #else
1154 static __init int da850_evm_init_cpufreq(void) { return 0; }
1155 #endif
1157 #if defined(CONFIG_DA850_UI_SD_VIDEO_PORT)
1159 #define TVP5147_CH0 "tvp514x-0"
1160 #define TVP5147_CH1 "tvp514x-1"
1162 /* VPIF capture configuration */
1163 static struct tvp514x_platform_data tvp5146_pdata = {
1164 .clk_polarity = 0,
1165 .hs_polarity = 1,
1166 .vs_polarity = 1,
1169 #define TVP514X_STD_ALL (V4L2_STD_NTSC | V4L2_STD_PAL)
1171 static const struct vpif_input da850_ch0_inputs[] = {
1173 .input = {
1174 .index = 0,
1175 .name = "Composite",
1176 .type = V4L2_INPUT_TYPE_CAMERA,
1177 .capabilities = V4L2_IN_CAP_STD,
1178 .std = TVP514X_STD_ALL,
1180 .input_route = INPUT_CVBS_VI2B,
1181 .output_route = OUTPUT_10BIT_422_EMBEDDED_SYNC,
1182 .subdev_name = TVP5147_CH0,
1186 static const struct vpif_input da850_ch1_inputs[] = {
1188 .input = {
1189 .index = 0,
1190 .name = "S-Video",
1191 .type = V4L2_INPUT_TYPE_CAMERA,
1192 .capabilities = V4L2_IN_CAP_STD,
1193 .std = TVP514X_STD_ALL,
1195 .input_route = INPUT_SVIDEO_VI2C_VI1C,
1196 .output_route = OUTPUT_10BIT_422_EMBEDDED_SYNC,
1197 .subdev_name = TVP5147_CH1,
1201 static struct vpif_subdev_info da850_vpif_capture_sdev_info[] = {
1203 .name = TVP5147_CH0,
1204 .board_info = {
1205 I2C_BOARD_INFO("tvp5146", 0x5d),
1206 .platform_data = &tvp5146_pdata,
1210 .name = TVP5147_CH1,
1211 .board_info = {
1212 I2C_BOARD_INFO("tvp5146", 0x5c),
1213 .platform_data = &tvp5146_pdata,
1218 static struct vpif_capture_config da850_vpif_capture_config = {
1219 .subdev_info = da850_vpif_capture_sdev_info,
1220 .subdev_count = ARRAY_SIZE(da850_vpif_capture_sdev_info),
1221 .chan_config[0] = {
1222 .inputs = da850_ch0_inputs,
1223 .input_count = ARRAY_SIZE(da850_ch0_inputs),
1224 .vpif_if = {
1225 .if_type = VPIF_IF_BT656,
1226 .hd_pol = 1,
1227 .vd_pol = 1,
1228 .fid_pol = 0,
1231 .chan_config[1] = {
1232 .inputs = da850_ch1_inputs,
1233 .input_count = ARRAY_SIZE(da850_ch1_inputs),
1234 .vpif_if = {
1235 .if_type = VPIF_IF_BT656,
1236 .hd_pol = 1,
1237 .vd_pol = 1,
1238 .fid_pol = 0,
1241 .card_name = "DA850/OMAP-L138 Video Capture",
1244 /* VPIF display configuration */
1246 static struct adv7343_platform_data adv7343_pdata = {
1247 .mode_config = {
1248 .dac = { 1, 1, 1 },
1250 .sd_config = {
1251 .sd_dac_out = { 1 },
1255 static struct vpif_subdev_info da850_vpif_subdev[] = {
1257 .name = "adv7343",
1258 .board_info = {
1259 I2C_BOARD_INFO("adv7343", 0x2a),
1260 .platform_data = &adv7343_pdata,
1265 static const struct vpif_output da850_ch0_outputs[] = {
1267 .output = {
1268 .index = 0,
1269 .name = "Composite",
1270 .type = V4L2_OUTPUT_TYPE_ANALOG,
1271 .capabilities = V4L2_OUT_CAP_STD,
1272 .std = V4L2_STD_ALL,
1274 .subdev_name = "adv7343",
1275 .output_route = ADV7343_COMPOSITE_ID,
1278 .output = {
1279 .index = 1,
1280 .name = "S-Video",
1281 .type = V4L2_OUTPUT_TYPE_ANALOG,
1282 .capabilities = V4L2_OUT_CAP_STD,
1283 .std = V4L2_STD_ALL,
1285 .subdev_name = "adv7343",
1286 .output_route = ADV7343_SVIDEO_ID,
1290 static struct vpif_display_config da850_vpif_display_config = {
1291 .subdevinfo = da850_vpif_subdev,
1292 .subdev_count = ARRAY_SIZE(da850_vpif_subdev),
1293 .chan_config[0] = {
1294 .outputs = da850_ch0_outputs,
1295 .output_count = ARRAY_SIZE(da850_ch0_outputs),
1297 .card_name = "DA850/OMAP-L138 Video Display",
1300 static __init void da850_vpif_init(void)
1302 int ret;
1304 ret = da850_register_vpif();
1305 if (ret)
1306 pr_warn("da850_evm_init: VPIF setup failed: %d\n", ret);
1308 ret = davinci_cfg_reg_list(da850_vpif_capture_pins);
1309 if (ret)
1310 pr_warn("da850_evm_init: VPIF capture mux setup failed: %d\n",
1311 ret);
1313 ret = da850_register_vpif_capture(&da850_vpif_capture_config);
1314 if (ret)
1315 pr_warn("da850_evm_init: VPIF capture setup failed: %d\n", ret);
1317 ret = davinci_cfg_reg_list(da850_vpif_display_pins);
1318 if (ret)
1319 pr_warn("da850_evm_init: VPIF display mux setup failed: %d\n",
1320 ret);
1322 ret = da850_register_vpif_display(&da850_vpif_display_config);
1323 if (ret)
1324 pr_warn("da850_evm_init: VPIF display setup failed: %d\n", ret);
1327 #else
1328 static __init void da850_vpif_init(void) {}
1329 #endif
1331 #ifdef CONFIG_DA850_WL12XX
1333 static void wl12xx_set_power(int index, bool power_on)
1335 static bool power_state;
1337 pr_debug("Powering %s wl12xx", power_on ? "on" : "off");
1339 if (power_on == power_state)
1340 return;
1341 power_state = power_on;
1343 if (power_on) {
1344 /* Power up sequence required for wl127x devices */
1345 gpio_set_value(DA850_WLAN_EN, 1);
1346 usleep_range(15000, 15000);
1347 gpio_set_value(DA850_WLAN_EN, 0);
1348 usleep_range(1000, 1000);
1349 gpio_set_value(DA850_WLAN_EN, 1);
1350 msleep(70);
1351 } else {
1352 gpio_set_value(DA850_WLAN_EN, 0);
1356 static struct davinci_mmc_config da850_wl12xx_mmc_config = {
1357 .set_power = wl12xx_set_power,
1358 .wires = 4,
1359 .max_freq = 25000000,
1360 .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_NONREMOVABLE |
1361 MMC_CAP_POWER_OFF_CARD,
1364 static const short da850_wl12xx_pins[] __initconst = {
1365 DA850_MMCSD1_DAT_0, DA850_MMCSD1_DAT_1, DA850_MMCSD1_DAT_2,
1366 DA850_MMCSD1_DAT_3, DA850_MMCSD1_CLK, DA850_MMCSD1_CMD,
1367 DA850_GPIO6_9, DA850_GPIO6_10,
1371 static struct wl12xx_platform_data da850_wl12xx_wlan_data __initdata = {
1372 .irq = -1,
1373 .board_ref_clock = WL12XX_REFCLOCK_38,
1374 .platform_quirks = WL12XX_PLATFORM_QUIRK_EDGE_IRQ,
1377 static __init int da850_wl12xx_init(void)
1379 int ret;
1381 ret = davinci_cfg_reg_list(da850_wl12xx_pins);
1382 if (ret) {
1383 pr_err("wl12xx/mmc mux setup failed: %d\n", ret);
1384 goto exit;
1387 ret = da850_register_mmcsd1(&da850_wl12xx_mmc_config);
1388 if (ret) {
1389 pr_err("wl12xx/mmc registration failed: %d\n", ret);
1390 goto exit;
1393 ret = gpio_request_one(DA850_WLAN_EN, GPIOF_OUT_INIT_LOW, "wl12xx_en");
1394 if (ret) {
1395 pr_err("Could not request wl12xx enable gpio: %d\n", ret);
1396 goto exit;
1399 ret = gpio_request_one(DA850_WLAN_IRQ, GPIOF_IN, "wl12xx_irq");
1400 if (ret) {
1401 pr_err("Could not request wl12xx irq gpio: %d\n", ret);
1402 goto free_wlan_en;
1405 da850_wl12xx_wlan_data.irq = gpio_to_irq(DA850_WLAN_IRQ);
1407 ret = wl12xx_set_platform_data(&da850_wl12xx_wlan_data);
1408 if (ret) {
1409 pr_err("Could not set wl12xx data: %d\n", ret);
1410 goto free_wlan_irq;
1413 return 0;
1415 free_wlan_irq:
1416 gpio_free(DA850_WLAN_IRQ);
1418 free_wlan_en:
1419 gpio_free(DA850_WLAN_EN);
1421 exit:
1422 return ret;
1425 #else /* CONFIG_DA850_WL12XX */
1427 static __init int da850_wl12xx_init(void)
1429 return 0;
1432 #endif /* CONFIG_DA850_WL12XX */
1434 #define DA850EVM_SATA_REFCLKPN_RATE (100 * 1000 * 1000)
1436 static __init void da850_evm_init(void)
1438 int ret;
1440 ret = pmic_tps65070_init();
1441 if (ret)
1442 pr_warn("%s: TPS65070 PMIC init failed: %d\n", __func__, ret);
1444 ret = da850_register_edma(da850_edma_rsv);
1445 if (ret)
1446 pr_warn("%s: EDMA registration failed: %d\n", __func__, ret);
1448 ret = davinci_cfg_reg_list(da850_i2c0_pins);
1449 if (ret)
1450 pr_warn("%s: I2C0 mux setup failed: %d\n", __func__, ret);
1452 ret = da8xx_register_i2c(0, &da850_evm_i2c_0_pdata);
1453 if (ret)
1454 pr_warn("%s: I2C0 registration failed: %d\n", __func__, ret);
1457 ret = da8xx_register_watchdog();
1458 if (ret)
1459 pr_warn("%s: watchdog registration failed: %d\n",
1460 __func__, ret);
1462 if (HAS_MMC) {
1463 ret = davinci_cfg_reg_list(da850_evm_mmcsd0_pins);
1464 if (ret)
1465 pr_warn("%s: MMCSD0 mux setup failed: %d\n",
1466 __func__, ret);
1468 ret = gpio_request(DA850_MMCSD_CD_PIN, "MMC CD\n");
1469 if (ret)
1470 pr_warn("%s: can not open GPIO %d\n",
1471 __func__, DA850_MMCSD_CD_PIN);
1472 gpio_direction_input(DA850_MMCSD_CD_PIN);
1474 ret = gpio_request(DA850_MMCSD_WP_PIN, "MMC WP\n");
1475 if (ret)
1476 pr_warn("%s: can not open GPIO %d\n",
1477 __func__, DA850_MMCSD_WP_PIN);
1478 gpio_direction_input(DA850_MMCSD_WP_PIN);
1480 ret = da8xx_register_mmcsd0(&da850_mmc_config);
1481 if (ret)
1482 pr_warn("%s: MMCSD0 registration failed: %d\n",
1483 __func__, ret);
1485 ret = da850_wl12xx_init();
1486 if (ret)
1487 pr_warn("%s: WL12xx initialization failed: %d\n",
1488 __func__, ret);
1491 davinci_serial_init(da8xx_serial_device);
1493 i2c_register_board_info(1, da850_evm_i2c_devices,
1494 ARRAY_SIZE(da850_evm_i2c_devices));
1497 * shut down uart 0 and 1; they are not used on the board and
1498 * accessing them causes endless "too much work in irq53" messages
1499 * with arago fs
1501 __raw_writel(0, IO_ADDRESS(DA8XX_UART1_BASE) + 0x30);
1502 __raw_writel(0, IO_ADDRESS(DA8XX_UART0_BASE) + 0x30);
1504 ret = davinci_cfg_reg_list(da850_evm_mcasp_pins);
1505 if (ret)
1506 pr_warn("%s: McASP mux setup failed: %d\n", __func__, ret);
1508 da850_evm_snd_data.sram_pool = sram_get_gen_pool();
1509 da8xx_register_mcasp(0, &da850_evm_snd_data);
1511 ret = davinci_cfg_reg_list(da850_lcdcntl_pins);
1512 if (ret)
1513 pr_warn("%s: LCDC mux setup failed: %d\n", __func__, ret);
1515 ret = da8xx_register_uio_pruss();
1516 if (ret)
1517 pr_warn("da850_evm_init: pruss initialization failed: %d\n",
1518 ret);
1520 /* Handle board specific muxing for LCD here */
1521 ret = davinci_cfg_reg_list(da850_evm_lcdc_pins);
1522 if (ret)
1523 pr_warn("%s: EVM specific LCD mux setup failed: %d\n",
1524 __func__, ret);
1526 ret = da850_lcd_hw_init();
1527 if (ret)
1528 pr_warn("%s: LCD initialization failed: %d\n", __func__, ret);
1530 sharp_lk043t1dg01_pdata.panel_power_ctrl = da850_panel_power_ctrl,
1531 ret = da8xx_register_lcdc(&sharp_lk043t1dg01_pdata);
1532 if (ret)
1533 pr_warn("%s: LCDC registration failed: %d\n", __func__, ret);
1535 ret = da8xx_register_rtc();
1536 if (ret)
1537 pr_warn("%s: RTC setup failed: %d\n", __func__, ret);
1539 ret = da850_evm_init_cpufreq();
1540 if (ret)
1541 pr_warn("%s: cpufreq registration failed: %d\n", __func__, ret);
1543 ret = da8xx_register_cpuidle();
1544 if (ret)
1545 pr_warn("%s: cpuidle registration failed: %d\n", __func__, ret);
1547 ret = da850_register_pm(&da850_pm_device);
1548 if (ret)
1549 pr_warn("%s: suspend registration failed: %d\n", __func__, ret);
1551 da850_vpif_init();
1553 ret = spi_register_board_info(da850evm_spi_info,
1554 ARRAY_SIZE(da850evm_spi_info));
1555 if (ret)
1556 pr_warn("%s: spi info registration failed: %d\n", __func__,
1557 ret);
1559 ret = da8xx_register_spi_bus(1, ARRAY_SIZE(da850evm_spi_info));
1560 if (ret)
1561 pr_warn("%s: SPI 1 registration failed: %d\n", __func__, ret);
1563 ret = da850_register_sata(DA850EVM_SATA_REFCLKPN_RATE);
1564 if (ret)
1565 pr_warn("%s: SATA registration failed: %d\n", __func__, ret);
1567 da850_evm_setup_mac_addr();
1569 ret = da8xx_register_rproc();
1570 if (ret)
1571 pr_warn("%s: dsp/rproc registration failed: %d\n",
1572 __func__, ret);
1575 #ifdef CONFIG_SERIAL_8250_CONSOLE
1576 static int __init da850_evm_console_init(void)
1578 if (!machine_is_davinci_da850_evm())
1579 return 0;
1581 return add_preferred_console("ttyS", 2, "115200");
1583 console_initcall(da850_evm_console_init);
1584 #endif
1586 static void __init da850_evm_map_io(void)
1588 da850_init();
1591 MACHINE_START(DAVINCI_DA850_EVM, "DaVinci DA850/OMAP-L138/AM18x EVM")
1592 .atag_offset = 0x100,
1593 .map_io = da850_evm_map_io,
1594 .init_irq = cp_intc_init,
1595 .init_time = davinci_timer_init,
1596 .init_machine = da850_evm_init,
1597 .init_late = davinci_init_late,
1598 .dma_zone_size = SZ_128M,
1599 .restart = da8xx_restart,
1600 .reserve = da8xx_rproc_reserve_cma,
1601 MACHINE_END