arch/arm/mach-davinci/board-dm646x-evm.c

   1 /*
   2  * TI DaVinci DM646X EVM board
   3  *
   4  * Derived from: arch/arm/mach-davinci/board-evm.c
   5  * Copyright (C) 2006 Texas Instruments.
   6  *
   7  * (C) 2007-2008, MontaVista Software, Inc.
   8  *
   9  * This file is licensed under the terms of the GNU General Public License
  10  * version 2. This program is licensed "as is" without any warranty of any
  11  * kind, whether express or implied.
  12  *
  13  */
  14
  15 /**************************************************************************
  16  * Included Files
  17  **************************************************************************/
  18
  19 #include <linux/kernel.h>
  20 #include <linux/init.h>
  21 #include <linux/leds.h>
  22 #include <linux/gpio.h>
  23 #include <linux/platform_device.h>
  24 #include <linux/i2c.h>
  25 #include <linux/i2c/at24.h>
  26 #include <linux/i2c/pcf857x.h>
  27
  28 #include <media/tvp514x.h>
  29 #include <media/adv7343.h>
  30
  31 #include <linux/mtd/mtd.h>
  32 #include <linux/mtd/nand.h>
  33 #include <linux/mtd/partitions.h>
  34 #include <linux/clk.h>
  35 #include <linux/export.h>
  36
  37 #include <asm/mach-types.h>
  38 #include <asm/mach/arch.h>
  39
  40 #include <mach/common.h>
  41 #include <mach/serial.h>
  42 #include <linux/platform_data/i2c-davinci.h>
  43 #include <linux/platform_data/mtd-davinci.h>
  44 #include <mach/clock.h>
  45 #include <mach/cdce949.h>
  46 #include <linux/platform_data/mtd-davinci-aemif.h>
  47
  48 #include "davinci.h"
  49 #include "clock.h"
  50
  51 #define NAND_BLOCK_SIZE         SZ_128K
  52
  53 /* Note: We are setting first partition as 'bootloader' constituting UBL, U-Boot
  54  * and U-Boot environment this avoids dependency on any particular combination
  55  * of UBL, U-Boot or flashing tools etc.
  56  */
  57 static struct mtd_partition davinci_nand_partitions[] = {
  58         {
  59                 /* UBL, U-Boot with environment */
  60                 .name           = "bootloader",
  61                 .offset         = MTDPART_OFS_APPEND,
  62                 .size           = 16 * NAND_BLOCK_SIZE,
  63                 .mask_flags     = MTD_WRITEABLE,        /* force read-only */
  64         }, {
  65                 .name           = "kernel",
  66                 .offset         = MTDPART_OFS_APPEND,
  67                 .size           = SZ_4M,
  68                 .mask_flags     = 0,
  69         }, {
  70                 .name           = "filesystem",
  71                 .offset         = MTDPART_OFS_APPEND,
  72                 .size           = MTDPART_SIZ_FULL,
  73                 .mask_flags     = 0,
  74         }
  75 };
  76
  77 static struct davinci_aemif_timing dm6467tevm_nandflash_timing = {
  78         .wsetup         = 29,
  79         .wstrobe        = 24,
  80         .whold          = 14,
  81         .rsetup         = 19,
  82         .rstrobe        = 33,
  83         .rhold          = 0,
  84         .ta             = 29,
  85 };
  86
  87 static struct davinci_nand_pdata davinci_nand_data = {
  88         .mask_cle               = 0x80000,
  89         .mask_ale               = 0x40000,
  90         .parts                  = davinci_nand_partitions,
  91         .nr_parts               = ARRAY_SIZE(davinci_nand_partitions),
  92         .ecc_mode               = NAND_ECC_HW,
  93         .ecc_bits               = 1,
  94         .options                = 0,
  95 };
  96
  97 static struct resource davinci_nand_resources[] = {
  98         {
  99                 .start          = DM646X_ASYNC_EMIF_CS2_SPACE_BASE,
 100                 .end            = DM646X_ASYNC_EMIF_CS2_SPACE_BASE + SZ_32M - 1,
 101                 .flags          = IORESOURCE_MEM,
 102         }, {
 103                 .start          = DM646X_ASYNC_EMIF_CONTROL_BASE,
 104                 .end            = DM646X_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1,
 105                 .flags          = IORESOURCE_MEM,
 106         },
 107 };
 108
 109 static struct platform_device davinci_nand_device = {
 110         .name                   = "davinci_nand",
 111         .id                     = 0,
 112
 113         .num_resources          = ARRAY_SIZE(davinci_nand_resources),
 114         .resource               = davinci_nand_resources,
 115
 116         .dev                    = {
 117                 .platform_data  = &davinci_nand_data,
 118         },
 119 };
 120
 121 #define HAS_ATA         IS_ENABLED(CONFIG_BLK_DEV_PALMCHIP_BK3710)
 122
 123 /* CPLD Register 0 bits to control ATA */
 124 #define DM646X_EVM_ATA_RST              BIT(0)
 125 #define DM646X_EVM_ATA_PWD              BIT(1)
 126
 127 /* CPLD Register 0 Client: used for I/O Control */
 128 static int cpld_reg0_probe(struct i2c_client *client,
 129                            const struct i2c_device_id *id)
 130 {
 131         if (HAS_ATA) {
 132                 u8 data;
 133                 struct i2c_msg msg[2] = {
 134                         {
 135                                 .addr = client->addr,
 136                                 .flags = I2C_M_RD,
 137                                 .len = 1,
 138                                 .buf = &data,
 139                         },
 140                         {
 141                                 .addr = client->addr,
 142                                 .flags = 0,
 143                                 .len = 1,
 144                                 .buf = &data,
 145                         },
 146                 };
 147
 148                 /* Clear ATA_RSTn and ATA_PWD bits to enable ATA operation. */
 149                 i2c_transfer(client->adapter, msg, 1);
 150                 data &= ~(DM646X_EVM_ATA_RST | DM646X_EVM_ATA_PWD);
 151                 i2c_transfer(client->adapter, msg + 1, 1);
 152         }
 153
 154         return 0;
 155 }
 156
 157 static const struct i2c_device_id cpld_reg_ids[] = {
 158         { "cpld_reg0", 0, },
 159         { },
 160 };
 161
 162 static struct i2c_driver dm6467evm_cpld_driver = {
 163         .driver.name    = "cpld_reg0",
 164         .id_table       = cpld_reg_ids,
 165         .probe          = cpld_reg0_probe,
 166 };
 167
 168 /* LEDS */
 169
 170 static struct gpio_led evm_leds[] = {
 171         { .name = "DS1", .active_low = 1, },
 172         { .name = "DS2", .active_low = 1, },
 173         { .name = "DS3", .active_low = 1, },
 174         { .name = "DS4", .active_low = 1, },
 175 };
 176
 177 static const struct gpio_led_platform_data evm_led_data = {
 178         .num_leds = ARRAY_SIZE(evm_leds),
 179         .leds     = evm_leds,
 180 };
 181
 182 static struct platform_device *evm_led_dev;
 183
 184 static int evm_led_setup(struct i2c_client *client, int gpio,
 185                         unsigned int ngpio, void *c)
 186 {
 187         struct gpio_led *leds = evm_leds;
 188         int status;
 189
 190         while (ngpio--) {
 191                 leds->gpio = gpio++;
 192                 leds++;
 193         }
 194
 195         evm_led_dev = platform_device_alloc("leds-gpio", 0);
 196         platform_device_add_data(evm_led_dev, &evm_led_data,
 197                                 sizeof(evm_led_data));
 198
 199         evm_led_dev->dev.parent = &client->dev;
 200         status = platform_device_add(evm_led_dev);
 201         if (status < 0) {
 202                 platform_device_put(evm_led_dev);
 203                 evm_led_dev = NULL;
 204         }
 205         return status;
 206 }
 207
 208 static int evm_led_teardown(struct i2c_client *client, int gpio,
 209                                 unsigned ngpio, void *c)
 210 {
 211         if (evm_led_dev) {
 212                 platform_device_unregister(evm_led_dev);
 213                 evm_led_dev = NULL;
 214         }
 215         return 0;
 216 }
 217
 218 static int evm_sw_gpio[4] = { -EINVAL, -EINVAL, -EINVAL, -EINVAL };
 219
 220 static int evm_sw_setup(struct i2c_client *client, int gpio,
 221                         unsigned ngpio, void *c)
 222 {
 223         int status;
 224         int i;
 225         char label[10];
 226
 227         for (i = 0; i < 4; ++i) {
 228                 snprintf(label, 10, "user_sw%d", i);
 229                 status = gpio_request(gpio, label);
 230                 if (status)
 231                         goto out_free;
 232                 evm_sw_gpio[i] = gpio++;
 233
 234                 status = gpio_direction_input(evm_sw_gpio[i]);
 235                 if (status) {
 236                         gpio_free(evm_sw_gpio[i]);
 237                         evm_sw_gpio[i] = -EINVAL;
 238                         goto out_free;
 239                 }
 240
 241                 status = gpio_export(evm_sw_gpio[i], 0);
 242                 if (status) {
 243                         gpio_free(evm_sw_gpio[i]);
 244                         evm_sw_gpio[i] = -EINVAL;
 245                         goto out_free;
 246                 }
 247         }
 248         return status;
 249 out_free:
 250         for (i = 0; i < 4; ++i) {
 251                 if (evm_sw_gpio[i] != -EINVAL) {
 252                         gpio_free(evm_sw_gpio[i]);
 253                         evm_sw_gpio[i] = -EINVAL;
 254                 }
 255         }
 256         return status;
 257 }
 258
 259 static int evm_sw_teardown(struct i2c_client *client, int gpio,
 260                         unsigned ngpio, void *c)
 261 {
 262         int i;
 263
 264         for (i = 0; i < 4; ++i) {
 265                 if (evm_sw_gpio[i] != -EINVAL) {
 266                         gpio_unexport(evm_sw_gpio[i]);
 267                         gpio_free(evm_sw_gpio[i]);
 268                         evm_sw_gpio[i] = -EINVAL;
 269                 }
 270         }
 271         return 0;
 272 }
 273
 274 static int evm_pcf_setup(struct i2c_client *client, int gpio,
 275                         unsigned int ngpio, void *c)
 276 {
 277         int status;
 278
 279         if (ngpio < 8)
 280                 return -EINVAL;
 281
 282         status = evm_sw_setup(client, gpio, 4, c);
 283         if (status)
 284                 return status;
 285
 286         return evm_led_setup(client, gpio+4, 4, c);
 287 }
 288
 289 static int evm_pcf_teardown(struct i2c_client *client, int gpio,
 290                         unsigned int ngpio, void *c)
 291 {
 292         BUG_ON(ngpio < 8);
 293
 294         evm_sw_teardown(client, gpio, 4, c);
 295         evm_led_teardown(client, gpio+4, 4, c);
 296
 297         return 0;
 298 }
 299
 300 static struct pcf857x_platform_data pcf_data = {
 301         .gpio_base      = DAVINCI_N_GPIO+1,
 302         .setup          = evm_pcf_setup,
 303         .teardown       = evm_pcf_teardown,
 304 };
 305
 306 /* Most of this EEPROM is unused, but U-Boot uses some data:
 307  *  - 0x7f00, 6 bytes Ethernet Address
 308  *  - ... newer boards may have more
 309  */
 310
 311 static struct at24_platform_data eeprom_info = {
 312         .byte_len       = (256*1024) / 8,
 313         .page_size      = 64,
 314         .flags          = AT24_FLAG_ADDR16,
 315         .setup          = davinci_get_mac_addr,
 316         .context        = (void *)0x7f00,
 317 };
 318
 319 static u8 dm646x_iis_serializer_direction[] = {
 320        TX_MODE, RX_MODE, INACTIVE_MODE, INACTIVE_MODE,
 321 };
 322
 323 static u8 dm646x_dit_serializer_direction[] = {
 324        TX_MODE,
 325 };
 326
 327 static struct snd_platform_data dm646x_evm_snd_data[] = {
 328         {
 329                 .tx_dma_offset  = 0x400,
 330                 .rx_dma_offset  = 0x400,
 331                 .op_mode        = DAVINCI_MCASP_IIS_MODE,
 332                 .num_serializer = ARRAY_SIZE(dm646x_iis_serializer_direction),
 333                 .tdm_slots      = 2,
 334                 .serial_dir     = dm646x_iis_serializer_direction,
 335                 .asp_chan_q     = EVENTQ_0,
 336         },
 337         {
 338                 .tx_dma_offset  = 0x400,
 339                 .rx_dma_offset  = 0,
 340                 .op_mode        = DAVINCI_MCASP_DIT_MODE,
 341                 .num_serializer = ARRAY_SIZE(dm646x_dit_serializer_direction),
 342                 .tdm_slots      = 32,
 343                 .serial_dir     = dm646x_dit_serializer_direction,
 344                 .asp_chan_q     = EVENTQ_0,
 345         },
 346 };
 347
 348 static struct i2c_client *cpld_client;
 349
 350 static int cpld_video_probe(struct i2c_client *client,
 351                         const struct i2c_device_id *id)
 352 {
 353         cpld_client = client;
 354         return 0;
 355 }
 356
 357 static int cpld_video_remove(struct i2c_client *client)
 358 {
 359         cpld_client = NULL;
 360         return 0;
 361 }
 362
 363 static const struct i2c_device_id cpld_video_id[] = {
 364         { "cpld_video", 0 },
 365         { }
 366 };
 367
 368 static struct i2c_driver cpld_video_driver = {
 369         .driver = {
 370                 .name   = "cpld_video",
 371         },
 372         .probe          = cpld_video_probe,
 373         .remove         = cpld_video_remove,
 374         .id_table       = cpld_video_id,
 375 };
 376
 377 static void evm_init_cpld(void)
 378 {
 379         i2c_add_driver(&cpld_video_driver);
 380 }
 381
 382 static struct i2c_board_info __initdata i2c_info[] =  {
 383         {
 384                 I2C_BOARD_INFO("24c256", 0x50),
 385                 .platform_data  = &eeprom_info,
 386         },
 387         {
 388                 I2C_BOARD_INFO("pcf8574a", 0x38),
 389                 .platform_data  = &pcf_data,
 390         },
 391         {
 392                 I2C_BOARD_INFO("cpld_reg0", 0x3a),
 393         },
 394         {
 395                 I2C_BOARD_INFO("tlv320aic33", 0x18),
 396         },
 397         {
 398                 I2C_BOARD_INFO("cpld_video", 0x3b),
 399         },
 400         {
 401                 I2C_BOARD_INFO("cdce949", 0x6c),
 402         },
 403 };
 404
 405 static struct davinci_i2c_platform_data i2c_pdata = {
 406         .bus_freq       = 100 /* kHz */,
 407         .bus_delay      = 0 /* usec */,
 408 };
 409
 410 #define VCH2CLK_MASK            (BIT_MASK(10) | BIT_MASK(9) | BIT_MASK(8))
 411 #define VCH2CLK_SYSCLK8         (BIT(9))
 412 #define VCH2CLK_AUXCLK          (BIT(9) | BIT(8))
 413 #define VCH3CLK_MASK            (BIT_MASK(14) | BIT_MASK(13) | BIT_MASK(12))
 414 #define VCH3CLK_SYSCLK8         (BIT(13))
 415 #define VCH3CLK_AUXCLK          (BIT(14) | BIT(13))
 416
 417 #define VIDCH2CLK               (BIT(10))
 418 #define VIDCH3CLK               (BIT(11))
 419 #define VIDCH1CLK               (BIT(4))
 420 #define TVP7002_INPUT           (BIT(4))
 421 #define TVP5147_INPUT           (~BIT(4))
 422 #define VPIF_INPUT_ONE_CHANNEL  (BIT(5))
 423 #define VPIF_INPUT_TWO_CHANNEL  (~BIT(5))
 424 #define TVP5147_CH0             "tvp514x-0"
 425 #define TVP5147_CH1             "tvp514x-1"
 426
 427 /* spin lock for updating above registers */
 428 static spinlock_t vpif_reg_lock;
 429
 430 static int set_vpif_clock(int mux_mode, int hd)
 431 {
 432         unsigned long flags;
 433         unsigned int value;
 434         int val = 0;
 435         int err = 0;
 436
 437         if (!cpld_client)
 438                 return -ENXIO;
 439
 440         /* disable the clock */
 441         spin_lock_irqsave(&vpif_reg_lock, flags);
 442         value = __raw_readl(DAVINCI_SYSMOD_VIRT(SYSMOD_VSCLKDIS));
 443         value |= (VIDCH3CLK | VIDCH2CLK);
 444         __raw_writel(value, DAVINCI_SYSMOD_VIRT(SYSMOD_VSCLKDIS));
 445         spin_unlock_irqrestore(&vpif_reg_lock, flags);
 446
 447         val = i2c_smbus_read_byte(cpld_client);
 448         if (val < 0)
 449                 return val;
 450
 451         if (mux_mode == 1)
 452                 val &= ~0x40;
 453         else
 454                 val |= 0x40;
 455
 456         err = i2c_smbus_write_byte(cpld_client, val);
 457         if (err)
 458                 return err;
 459
 460         value = __raw_readl(DAVINCI_SYSMOD_VIRT(SYSMOD_VIDCLKCTL));
 461         value &= ~(VCH2CLK_MASK);
 462         value &= ~(VCH3CLK_MASK);
 463
 464         if (hd >= 1)
 465                 value |= (VCH2CLK_SYSCLK8 | VCH3CLK_SYSCLK8);
 466         else
 467                 value |= (VCH2CLK_AUXCLK | VCH3CLK_AUXCLK);
 468
 469         __raw_writel(value, DAVINCI_SYSMOD_VIRT(SYSMOD_VIDCLKCTL));
 470
 471         spin_lock_irqsave(&vpif_reg_lock, flags);
 472         value = __raw_readl(DAVINCI_SYSMOD_VIRT(SYSMOD_VSCLKDIS));
 473         /* enable the clock */
 474         value &= ~(VIDCH3CLK | VIDCH2CLK);
 475         __raw_writel(value, DAVINCI_SYSMOD_VIRT(SYSMOD_VSCLKDIS));
 476         spin_unlock_irqrestore(&vpif_reg_lock, flags);
 477
 478         return 0;
 479 }
 480
 481 static struct vpif_subdev_info dm646x_vpif_subdev[] = {
 482         {
 483                 .name   = "adv7343",
 484                 .board_info = {
 485                         I2C_BOARD_INFO("adv7343", 0x2a),
 486                 },
 487         },
 488         {
 489                 .name   = "ths7303",
 490                 .board_info = {
 491                         I2C_BOARD_INFO("ths7303", 0x2c),
 492                 },
 493         },
 494 };
 495
 496 static const struct vpif_output dm6467_ch0_outputs[] = {
 497         {
 498                 .output = {
 499                         .index = 0,
 500                         .name = "Composite",
 501                         .type = V4L2_OUTPUT_TYPE_ANALOG,
 502                         .capabilities = V4L2_OUT_CAP_STD,
 503                         .std = V4L2_STD_ALL,
 504                 },
 505                 .subdev_name = "adv7343",
 506                 .output_route = ADV7343_COMPOSITE_ID,
 507         },
 508         {
 509                 .output = {
 510                         .index = 1,
 511                         .name = "Component",
 512                         .type = V4L2_OUTPUT_TYPE_ANALOG,
 513                         .capabilities = V4L2_OUT_CAP_DV_TIMINGS,
 514                 },
 515                 .subdev_name = "adv7343",
 516                 .output_route = ADV7343_COMPONENT_ID,
 517         },
 518         {
 519                 .output = {
 520                         .index = 2,
 521                         .name = "S-Video",
 522                         .type = V4L2_OUTPUT_TYPE_ANALOG,
 523                         .capabilities = V4L2_OUT_CAP_STD,
 524                         .std = V4L2_STD_ALL,
 525                 },
 526                 .subdev_name = "adv7343",
 527                 .output_route = ADV7343_SVIDEO_ID,
 528         },
 529 };
 530
 531 static struct vpif_display_config dm646x_vpif_display_config = {
 532         .set_clock      = set_vpif_clock,
 533         .subdevinfo     = dm646x_vpif_subdev,
 534         .subdev_count   = ARRAY_SIZE(dm646x_vpif_subdev),
 535         .chan_config[0] = {
 536                 .outputs = dm6467_ch0_outputs,
 537                 .output_count = ARRAY_SIZE(dm6467_ch0_outputs),
 538         },
 539         .card_name      = "DM646x EVM",
 540 };
 541
 542 /**
 543  * setup_vpif_input_path()
 544  * @channel: channel id (0 - CH0, 1 - CH1)
 545  * @sub_dev_name: ptr sub device name
 546  *
 547  * This will set vpif input to capture data from tvp514x or
 548  * tvp7002.
 549  */
 550 static int setup_vpif_input_path(int channel, const char *sub_dev_name)
 551 {
 552         int err = 0;
 553         int val;
 554
 555         /* for channel 1, we don't do anything */
 556         if (channel != 0)
 557                 return 0;
 558
 559         if (!cpld_client)
 560                 return -ENXIO;
 561
 562         val = i2c_smbus_read_byte(cpld_client);
 563         if (val < 0)
 564                 return val;
 565
 566         if (!strcmp(sub_dev_name, TVP5147_CH0) ||
 567             !strcmp(sub_dev_name, TVP5147_CH1))
 568                 val &= TVP5147_INPUT;
 569         else
 570                 val |= TVP7002_INPUT;
 571
 572         err = i2c_smbus_write_byte(cpld_client, val);
 573         if (err)
 574                 return err;
 575         return 0;
 576 }
 577
 578 /**
 579  * setup_vpif_input_channel_mode()
 580  * @mux_mode:  mux mode. 0 - 1 channel or (1) - 2 channel
 581  *
 582  * This will setup input mode to one channel (TVP7002) or 2 channel (TVP5147)
 583  */
 584 static int setup_vpif_input_channel_mode(int mux_mode)
 585 {
 586         unsigned long flags;
 587         int err = 0;
 588         int val;
 589         u32 value;
 590
 591         if (!cpld_client)
 592                 return -ENXIO;
 593
 594         val = i2c_smbus_read_byte(cpld_client);
 595         if (val < 0)
 596                 return val;
 597
 598         spin_lock_irqsave(&vpif_reg_lock, flags);
 599         value = __raw_readl(DAVINCI_SYSMOD_VIRT(SYSMOD_VIDCLKCTL));
 600         if (mux_mode) {
 601                 val &= VPIF_INPUT_TWO_CHANNEL;
 602                 value |= VIDCH1CLK;
 603         } else {
 604                 val |= VPIF_INPUT_ONE_CHANNEL;
 605                 value &= ~VIDCH1CLK;
 606         }
 607         __raw_writel(value, DAVINCI_SYSMOD_VIRT(SYSMOD_VIDCLKCTL));
 608         spin_unlock_irqrestore(&vpif_reg_lock, flags);
 609
 610         err = i2c_smbus_write_byte(cpld_client, val);
 611         if (err)
 612                 return err;
 613
 614         return 0;
 615 }
 616
 617 static struct tvp514x_platform_data tvp5146_pdata = {
 618         .clk_polarity = 0,
 619         .hs_polarity = 1,
 620         .vs_polarity = 1
 621 };
 622
 623 #define TVP514X_STD_ALL (V4L2_STD_NTSC | V4L2_STD_PAL)
 624
 625 static struct vpif_subdev_info vpif_capture_sdev_info[] = {
 626         {
 627                 .name   = TVP5147_CH0,
 628                 .board_info = {
 629                         I2C_BOARD_INFO("tvp5146", 0x5d),
 630                         .platform_data = &tvp5146_pdata,
 631                 },
 632         },
 633         {
 634                 .name   = TVP5147_CH1,
 635                 .board_info = {
 636                         I2C_BOARD_INFO("tvp5146", 0x5c),
 637                         .platform_data = &tvp5146_pdata,
 638                 },
 639         },
 640 };
 641
 642 static const struct vpif_input dm6467_ch0_inputs[] = {
 643         {
 644                 .input = {
 645                         .index = 0,
 646                         .name = "Composite",
 647                         .type = V4L2_INPUT_TYPE_CAMERA,
 648                         .capabilities = V4L2_IN_CAP_STD,
 649                         .std = TVP514X_STD_ALL,
 650                 },
 651                 .subdev_name = TVP5147_CH0,
 652                 .input_route = INPUT_CVBS_VI2B,
 653                 .output_route = OUTPUT_10BIT_422_EMBEDDED_SYNC,
 654         },
 655 };
 656
 657 static const struct vpif_input dm6467_ch1_inputs[] = {
 658        {
 659                 .input = {
 660                         .index = 0,
 661                         .name = "S-Video",
 662                         .type = V4L2_INPUT_TYPE_CAMERA,
 663                         .capabilities = V4L2_IN_CAP_STD,
 664                         .std = TVP514X_STD_ALL,
 665                 },
 666                 .subdev_name = TVP5147_CH1,
 667                 .input_route = INPUT_SVIDEO_VI2C_VI1C,
 668                 .output_route = OUTPUT_10BIT_422_EMBEDDED_SYNC,
 669         },
 670 };
 671
 672 static struct vpif_capture_config dm646x_vpif_capture_cfg = {
 673         .setup_input_path = setup_vpif_input_path,
 674         .setup_input_channel_mode = setup_vpif_input_channel_mode,
 675         .subdev_info = vpif_capture_sdev_info,
 676         .subdev_count = ARRAY_SIZE(vpif_capture_sdev_info),
 677         .chan_config[0] = {
 678                 .inputs = dm6467_ch0_inputs,
 679                 .input_count = ARRAY_SIZE(dm6467_ch0_inputs),
 680                 .vpif_if = {
 681                         .if_type = VPIF_IF_BT656,
 682                         .hd_pol = 1,
 683                         .vd_pol = 1,
 684                         .fid_pol = 0,
 685                 },
 686         },
 687         .chan_config[1] = {
 688                 .inputs = dm6467_ch1_inputs,
 689                 .input_count = ARRAY_SIZE(dm6467_ch1_inputs),
 690                 .vpif_if = {
 691                         .if_type = VPIF_IF_BT656,
 692                         .hd_pol = 1,
 693                         .vd_pol = 1,
 694                         .fid_pol = 0,
 695                 },
 696         },
 697 };
 698
 699 static void __init evm_init_video(void)
 700 {
 701         spin_lock_init(&vpif_reg_lock);
 702
 703         dm646x_setup_vpif(&dm646x_vpif_display_config,
 704                           &dm646x_vpif_capture_cfg);
 705 }
 706
 707 static void __init evm_init_i2c(void)
 708 {
 709         davinci_init_i2c(&i2c_pdata);
 710         i2c_add_driver(&dm6467evm_cpld_driver);
 711         i2c_register_board_info(1, i2c_info, ARRAY_SIZE(i2c_info));
 712         evm_init_cpld();
 713         evm_init_video();
 714 }
 715
 716 #define CDCE949_XIN_RATE        27000000
 717
 718 /* CDCE949 support - "lpsc" field is overridden to work as clock number */
 719 static struct clk cdce_clk_in = {
 720         .name   = "cdce_xin",
 721         .rate   = CDCE949_XIN_RATE,
 722 };
 723
 724 static struct clk_lookup cdce_clks[] = {
 725         CLK(NULL, "xin", &cdce_clk_in),
 726         CLK(NULL, NULL, NULL),
 727 };
 728
 729 static void __init cdce_clk_init(void)
 730 {
 731         struct clk_lookup *c;
 732         struct clk *clk;
 733
 734         for (c = cdce_clks; c->clk; c++) {
 735                 clk = c->clk;
 736                 clkdev_add(c);
 737                 clk_register(clk);
 738         }
 739 }
 740
 741 #define DM6467T_EVM_REF_FREQ            33000000
 742
 743 static void __init davinci_map_io(void)
 744 {
 745         dm646x_init();
 746
 747         if (machine_is_davinci_dm6467tevm())
 748                 davinci_set_refclk_rate(DM6467T_EVM_REF_FREQ);
 749
 750         cdce_clk_init();
 751 }
 752
 753 #define DM646X_EVM_PHY_ID               "davinci_mdio-0:01"
 754 /*
 755  * The following EDMA channels/slots are not being used by drivers (for
 756  * example: Timer, GPIO, UART events etc) on dm646x, hence they are being
 757  * reserved for codecs on the DSP side.
 758  */
 759 static const s16 dm646x_dma_rsv_chans[][2] = {
 760         /* (offset, number) */
 761         { 0,  4},
 762         {13,  3},
 763         {24,  4},
 764         {30,  2},
 765         {54,  3},
 766         {-1, -1}
 767 };
 768
 769 static const s16 dm646x_dma_rsv_slots[][2] = {
 770         /* (offset, number) */
 771         { 0,  4},
 772         {13,  3},
 773         {24,  4},
 774         {30,  2},
 775         {54,  3},
 776         {128, 384},
 777         {-1, -1}
 778 };
 779
 780 static struct edma_rsv_info dm646x_edma_rsv[] = {
 781         {
 782                 .rsv_chans      = dm646x_dma_rsv_chans,
 783                 .rsv_slots      = dm646x_dma_rsv_slots,
 784         },
 785 };
 786
 787 static __init void evm_init(void)
 788 {
 789         struct davinci_soc_info *soc_info = &davinci_soc_info;
 790
 791         evm_init_i2c();
 792         davinci_serial_init(dm646x_serial_device);
 793         dm646x_init_mcasp0(&dm646x_evm_snd_data[0]);
 794         dm646x_init_mcasp1(&dm646x_evm_snd_data[1]);
 795
 796         if (machine_is_davinci_dm6467tevm())
 797                 davinci_nand_data.timing = &dm6467tevm_nandflash_timing;
 798
 799         platform_device_register(&davinci_nand_device);
 800
 801         dm646x_init_edma(dm646x_edma_rsv);
 802
 803         if (HAS_ATA)
 804                 davinci_init_ide();
 805
 806         soc_info->emac_pdata->phy_id = DM646X_EVM_PHY_ID;
 807 }
 808
 809 MACHINE_START(DAVINCI_DM6467_EVM, "DaVinci DM646x EVM")
 810         .atag_offset  = 0x100,
 811         .map_io       = davinci_map_io,
 812         .init_irq     = davinci_irq_init,
 813         .init_time      = davinci_timer_init,
 814         .init_machine = evm_init,
 815         .init_late      = davinci_init_late,
 816         .dma_zone_size  = SZ_128M,
 817         .restart        = davinci_restart,
 818 MACHINE_END
 819
 820 MACHINE_START(DAVINCI_DM6467TEVM, "DaVinci DM6467T EVM")
 821         .atag_offset  = 0x100,
 822         .map_io       = davinci_map_io,
 823         .init_irq     = davinci_irq_init,
 824         .init_time      = davinci_timer_init,
 825         .init_machine = evm_init,
 826         .init_late      = davinci_init_late,
 827         .dma_zone_size  = SZ_128M,
 828         .restart        = davinci_restart,
 829 MACHINE_END
 830