x86/xen: resume timer irqs early
[linux/fpc-iii.git] / drivers / block / paride / pd.c
blob19ad8f0c83efe6942eb2dbabc95a978a41f05cd9
1 /*
2 pd.c (c) 1997-8 Grant R. Guenther <grant@torque.net>
3 Under the terms of the GNU General Public License.
5 This is the high-level driver for parallel port IDE hard
6 drives based on chips supported by the paride module.
8 By default, the driver will autoprobe for a single parallel
9 port IDE drive, but if their individual parameters are
10 specified, the driver can handle up to 4 drives.
12 The behaviour of the pd driver can be altered by setting
13 some parameters from the insmod command line. The following
14 parameters are adjustable:
16 drive0 These four arguments can be arrays of
17 drive1 1-8 integers as follows:
18 drive2
19 drive3 <prt>,<pro>,<uni>,<mod>,<geo>,<sby>,<dly>,<slv>
21 Where,
23 <prt> is the base of the parallel port address for
24 the corresponding drive. (required)
26 <pro> is the protocol number for the adapter that
27 supports this drive. These numbers are
28 logged by 'paride' when the protocol modules
29 are initialised. (0 if not given)
31 <uni> for those adapters that support chained
32 devices, this is the unit selector for the
33 chain of devices on the given port. It should
34 be zero for devices that don't support chaining.
35 (0 if not given)
37 <mod> this can be -1 to choose the best mode, or one
38 of the mode numbers supported by the adapter.
39 (-1 if not given)
41 <geo> this defaults to 0 to indicate that the driver
42 should use the CHS geometry provided by the drive
43 itself. If set to 1, the driver will provide
44 a logical geometry with 64 heads and 32 sectors
45 per track, to be consistent with most SCSI
46 drivers. (0 if not given)
48 <sby> set this to zero to disable the power saving
49 standby mode, if needed. (1 if not given)
51 <dly> some parallel ports require the driver to
52 go more slowly. -1 sets a default value that
53 should work with the chosen protocol. Otherwise,
54 set this to a small integer, the larger it is
55 the slower the port i/o. In some cases, setting
56 this to zero will speed up the device. (default -1)
58 <slv> IDE disks can be jumpered to master or slave.
59 Set this to 0 to choose the master drive, 1 to
60 choose the slave, -1 (the default) to choose the
61 first drive found.
64 major You may use this parameter to overide the
65 default major number (45) that this driver
66 will use. Be sure to change the device
67 name as well.
69 name This parameter is a character string that
70 contains the name the kernel will use for this
71 device (in /proc output, for instance).
72 (default "pd")
74 cluster The driver will attempt to aggregate requests
75 for adjacent blocks into larger multi-block
76 clusters. The maximum cluster size (in 512
77 byte sectors) is set with this parameter.
78 (default 64)
80 verbose This parameter controls the amount of logging
81 that the driver will do. Set it to 0 for
82 normal operation, 1 to see autoprobe progress
83 messages, or 2 to see additional debugging
84 output. (default 0)
86 nice This parameter controls the driver's use of
87 idle CPU time, at the expense of some speed.
89 If this driver is built into the kernel, you can use kernel
90 the following command line parameters, with the same values
91 as the corresponding module parameters listed above:
93 pd.drive0
94 pd.drive1
95 pd.drive2
96 pd.drive3
97 pd.cluster
98 pd.nice
100 In addition, you can use the parameter pd.disable to disable
101 the driver entirely.
105 /* Changes:
107 1.01 GRG 1997.01.24 Restored pd_reset()
108 Added eject ioctl
109 1.02 GRG 1998.05.06 SMP spinlock changes,
110 Added slave support
111 1.03 GRG 1998.06.16 Eliminate an Ugh.
112 1.04 GRG 1998.08.15 Extra debugging, use HZ in loop timing
113 1.05 GRG 1998.09.24 Added jumbo support
117 #define PD_VERSION "1.05"
118 #define PD_MAJOR 45
119 #define PD_NAME "pd"
120 #define PD_UNITS 4
122 /* Here are things one can override from the insmod command.
123 Most are autoprobed by paride unless set here. Verbose is off
124 by default.
127 #include <linux/types.h>
129 static bool verbose = 0;
130 static int major = PD_MAJOR;
131 static char *name = PD_NAME;
132 static int cluster = 64;
133 static int nice = 0;
134 static int disable = 0;
136 static int drive0[8] = { 0, 0, 0, -1, 0, 1, -1, -1 };
137 static int drive1[8] = { 0, 0, 0, -1, 0, 1, -1, -1 };
138 static int drive2[8] = { 0, 0, 0, -1, 0, 1, -1, -1 };
139 static int drive3[8] = { 0, 0, 0, -1, 0, 1, -1, -1 };
141 static int (*drives[4])[8] = {&drive0, &drive1, &drive2, &drive3};
143 enum {D_PRT, D_PRO, D_UNI, D_MOD, D_GEO, D_SBY, D_DLY, D_SLV};
145 /* end of parameters */
147 #include <linux/init.h>
148 #include <linux/module.h>
149 #include <linux/gfp.h>
150 #include <linux/fs.h>
151 #include <linux/delay.h>
152 #include <linux/hdreg.h>
153 #include <linux/cdrom.h> /* for the eject ioctl */
154 #include <linux/blkdev.h>
155 #include <linux/blkpg.h>
156 #include <linux/kernel.h>
157 #include <linux/mutex.h>
158 #include <asm/uaccess.h>
159 #include <linux/workqueue.h>
161 static DEFINE_MUTEX(pd_mutex);
162 static DEFINE_SPINLOCK(pd_lock);
164 module_param(verbose, bool, 0);
165 module_param(major, int, 0);
166 module_param(name, charp, 0);
167 module_param(cluster, int, 0);
168 module_param(nice, int, 0);
169 module_param_array(drive0, int, NULL, 0);
170 module_param_array(drive1, int, NULL, 0);
171 module_param_array(drive2, int, NULL, 0);
172 module_param_array(drive3, int, NULL, 0);
174 #include "paride.h"
176 #define PD_BITS 4
178 /* numbers for "SCSI" geometry */
180 #define PD_LOG_HEADS 64
181 #define PD_LOG_SECTS 32
183 #define PD_ID_OFF 54
184 #define PD_ID_LEN 14
186 #define PD_MAX_RETRIES 5
187 #define PD_TMO 800 /* interrupt timeout in jiffies */
188 #define PD_SPIN_DEL 50 /* spin delay in micro-seconds */
190 #define PD_SPIN (1000000*PD_TMO)/(HZ*PD_SPIN_DEL)
192 #define STAT_ERR 0x00001
193 #define STAT_INDEX 0x00002
194 #define STAT_ECC 0x00004
195 #define STAT_DRQ 0x00008
196 #define STAT_SEEK 0x00010
197 #define STAT_WRERR 0x00020
198 #define STAT_READY 0x00040
199 #define STAT_BUSY 0x00080
201 #define ERR_AMNF 0x00100
202 #define ERR_TK0NF 0x00200
203 #define ERR_ABRT 0x00400
204 #define ERR_MCR 0x00800
205 #define ERR_IDNF 0x01000
206 #define ERR_MC 0x02000
207 #define ERR_UNC 0x04000
208 #define ERR_TMO 0x10000
210 #define IDE_READ 0x20
211 #define IDE_WRITE 0x30
212 #define IDE_READ_VRFY 0x40
213 #define IDE_INIT_DEV_PARMS 0x91
214 #define IDE_STANDBY 0x96
215 #define IDE_ACKCHANGE 0xdb
216 #define IDE_DOORLOCK 0xde
217 #define IDE_DOORUNLOCK 0xdf
218 #define IDE_IDENTIFY 0xec
219 #define IDE_EJECT 0xed
221 #define PD_NAMELEN 8
223 struct pd_unit {
224 struct pi_adapter pia; /* interface to paride layer */
225 struct pi_adapter *pi;
226 int access; /* count of active opens ... */
227 int capacity; /* Size of this volume in sectors */
228 int heads; /* physical geometry */
229 int sectors;
230 int cylinders;
231 int can_lba;
232 int drive; /* master=0 slave=1 */
233 int changed; /* Have we seen a disk change ? */
234 int removable; /* removable media device ? */
235 int standby;
236 int alt_geom;
237 char name[PD_NAMELEN]; /* pda, pdb, etc ... */
238 struct gendisk *gd;
241 static struct pd_unit pd[PD_UNITS];
243 static char pd_scratch[512]; /* scratch block buffer */
245 static char *pd_errs[17] = { "ERR", "INDEX", "ECC", "DRQ", "SEEK", "WRERR",
246 "READY", "BUSY", "AMNF", "TK0NF", "ABRT", "MCR",
247 "IDNF", "MC", "UNC", "???", "TMO"
250 static inline int status_reg(struct pd_unit *disk)
252 return pi_read_regr(disk->pi, 1, 6);
255 static inline int read_reg(struct pd_unit *disk, int reg)
257 return pi_read_regr(disk->pi, 0, reg);
260 static inline void write_status(struct pd_unit *disk, int val)
262 pi_write_regr(disk->pi, 1, 6, val);
265 static inline void write_reg(struct pd_unit *disk, int reg, int val)
267 pi_write_regr(disk->pi, 0, reg, val);
270 static inline u8 DRIVE(struct pd_unit *disk)
272 return 0xa0+0x10*disk->drive;
275 /* ide command interface */
277 static void pd_print_error(struct pd_unit *disk, char *msg, int status)
279 int i;
281 printk("%s: %s: status = 0x%x =", disk->name, msg, status);
282 for (i = 0; i < ARRAY_SIZE(pd_errs); i++)
283 if (status & (1 << i))
284 printk(" %s", pd_errs[i]);
285 printk("\n");
288 static void pd_reset(struct pd_unit *disk)
289 { /* called only for MASTER drive */
290 write_status(disk, 4);
291 udelay(50);
292 write_status(disk, 0);
293 udelay(250);
296 #define DBMSG(msg) ((verbose>1)?(msg):NULL)
298 static int pd_wait_for(struct pd_unit *disk, int w, char *msg)
299 { /* polled wait */
300 int k, r, e;
302 k = 0;
303 while (k < PD_SPIN) {
304 r = status_reg(disk);
305 k++;
306 if (((r & w) == w) && !(r & STAT_BUSY))
307 break;
308 udelay(PD_SPIN_DEL);
310 e = (read_reg(disk, 1) << 8) + read_reg(disk, 7);
311 if (k >= PD_SPIN)
312 e |= ERR_TMO;
313 if ((e & (STAT_ERR | ERR_TMO)) && (msg != NULL))
314 pd_print_error(disk, msg, e);
315 return e;
318 static void pd_send_command(struct pd_unit *disk, int n, int s, int h, int c0, int c1, int func)
320 write_reg(disk, 6, DRIVE(disk) + h);
321 write_reg(disk, 1, 0); /* the IDE task file */
322 write_reg(disk, 2, n);
323 write_reg(disk, 3, s);
324 write_reg(disk, 4, c0);
325 write_reg(disk, 5, c1);
326 write_reg(disk, 7, func);
328 udelay(1);
331 static void pd_ide_command(struct pd_unit *disk, int func, int block, int count)
333 int c1, c0, h, s;
335 if (disk->can_lba) {
336 s = block & 255;
337 c0 = (block >>= 8) & 255;
338 c1 = (block >>= 8) & 255;
339 h = ((block >>= 8) & 15) + 0x40;
340 } else {
341 s = (block % disk->sectors) + 1;
342 h = (block /= disk->sectors) % disk->heads;
343 c0 = (block /= disk->heads) % 256;
344 c1 = (block >>= 8);
346 pd_send_command(disk, count, s, h, c0, c1, func);
349 /* The i/o request engine */
351 enum action {Fail = 0, Ok = 1, Hold, Wait};
353 static struct request *pd_req; /* current request */
354 static enum action (*phase)(void);
356 static void run_fsm(void);
358 static void ps_tq_int(struct work_struct *work);
360 static DECLARE_DELAYED_WORK(fsm_tq, ps_tq_int);
362 static void schedule_fsm(void)
364 if (!nice)
365 schedule_delayed_work(&fsm_tq, 0);
366 else
367 schedule_delayed_work(&fsm_tq, nice-1);
370 static void ps_tq_int(struct work_struct *work)
372 run_fsm();
375 static enum action do_pd_io_start(void);
376 static enum action pd_special(void);
377 static enum action do_pd_read_start(void);
378 static enum action do_pd_write_start(void);
379 static enum action do_pd_read_drq(void);
380 static enum action do_pd_write_done(void);
382 static struct request_queue *pd_queue;
383 static int pd_claimed;
385 static struct pd_unit *pd_current; /* current request's drive */
386 static PIA *pi_current; /* current request's PIA */
388 static void run_fsm(void)
390 while (1) {
391 enum action res;
392 unsigned long saved_flags;
393 int stop = 0;
395 if (!phase) {
396 pd_current = pd_req->rq_disk->private_data;
397 pi_current = pd_current->pi;
398 phase = do_pd_io_start;
401 switch (pd_claimed) {
402 case 0:
403 pd_claimed = 1;
404 if (!pi_schedule_claimed(pi_current, run_fsm))
405 return;
406 case 1:
407 pd_claimed = 2;
408 pi_current->proto->connect(pi_current);
411 switch(res = phase()) {
412 case Ok: case Fail:
413 pi_disconnect(pi_current);
414 pd_claimed = 0;
415 phase = NULL;
416 spin_lock_irqsave(&pd_lock, saved_flags);
417 if (!__blk_end_request_cur(pd_req,
418 res == Ok ? 0 : -EIO)) {
419 pd_req = blk_fetch_request(pd_queue);
420 if (!pd_req)
421 stop = 1;
423 spin_unlock_irqrestore(&pd_lock, saved_flags);
424 if (stop)
425 return;
426 case Hold:
427 schedule_fsm();
428 return;
429 case Wait:
430 pi_disconnect(pi_current);
431 pd_claimed = 0;
436 static int pd_retries = 0; /* i/o error retry count */
437 static int pd_block; /* address of next requested block */
438 static int pd_count; /* number of blocks still to do */
439 static int pd_run; /* sectors in current cluster */
440 static int pd_cmd; /* current command READ/WRITE */
441 static char *pd_buf; /* buffer for request in progress */
443 static enum action do_pd_io_start(void)
445 if (pd_req->cmd_type == REQ_TYPE_SPECIAL) {
446 phase = pd_special;
447 return pd_special();
450 pd_cmd = rq_data_dir(pd_req);
451 if (pd_cmd == READ || pd_cmd == WRITE) {
452 pd_block = blk_rq_pos(pd_req);
453 pd_count = blk_rq_cur_sectors(pd_req);
454 if (pd_block + pd_count > get_capacity(pd_req->rq_disk))
455 return Fail;
456 pd_run = blk_rq_sectors(pd_req);
457 pd_buf = pd_req->buffer;
458 pd_retries = 0;
459 if (pd_cmd == READ)
460 return do_pd_read_start();
461 else
462 return do_pd_write_start();
464 return Fail;
467 static enum action pd_special(void)
469 enum action (*func)(struct pd_unit *) = pd_req->special;
470 return func(pd_current);
473 static int pd_next_buf(void)
475 unsigned long saved_flags;
477 pd_count--;
478 pd_run--;
479 pd_buf += 512;
480 pd_block++;
481 if (!pd_run)
482 return 1;
483 if (pd_count)
484 return 0;
485 spin_lock_irqsave(&pd_lock, saved_flags);
486 __blk_end_request_cur(pd_req, 0);
487 pd_count = blk_rq_cur_sectors(pd_req);
488 pd_buf = pd_req->buffer;
489 spin_unlock_irqrestore(&pd_lock, saved_flags);
490 return 0;
493 static unsigned long pd_timeout;
495 static enum action do_pd_read_start(void)
497 if (pd_wait_for(pd_current, STAT_READY, "do_pd_read") & STAT_ERR) {
498 if (pd_retries < PD_MAX_RETRIES) {
499 pd_retries++;
500 return Wait;
502 return Fail;
504 pd_ide_command(pd_current, IDE_READ, pd_block, pd_run);
505 phase = do_pd_read_drq;
506 pd_timeout = jiffies + PD_TMO;
507 return Hold;
510 static enum action do_pd_write_start(void)
512 if (pd_wait_for(pd_current, STAT_READY, "do_pd_write") & STAT_ERR) {
513 if (pd_retries < PD_MAX_RETRIES) {
514 pd_retries++;
515 return Wait;
517 return Fail;
519 pd_ide_command(pd_current, IDE_WRITE, pd_block, pd_run);
520 while (1) {
521 if (pd_wait_for(pd_current, STAT_DRQ, "do_pd_write_drq") & STAT_ERR) {
522 if (pd_retries < PD_MAX_RETRIES) {
523 pd_retries++;
524 return Wait;
526 return Fail;
528 pi_write_block(pd_current->pi, pd_buf, 512);
529 if (pd_next_buf())
530 break;
532 phase = do_pd_write_done;
533 pd_timeout = jiffies + PD_TMO;
534 return Hold;
537 static inline int pd_ready(void)
539 return !(status_reg(pd_current) & STAT_BUSY);
542 static enum action do_pd_read_drq(void)
544 if (!pd_ready() && !time_after_eq(jiffies, pd_timeout))
545 return Hold;
547 while (1) {
548 if (pd_wait_for(pd_current, STAT_DRQ, "do_pd_read_drq") & STAT_ERR) {
549 if (pd_retries < PD_MAX_RETRIES) {
550 pd_retries++;
551 phase = do_pd_read_start;
552 return Wait;
554 return Fail;
556 pi_read_block(pd_current->pi, pd_buf, 512);
557 if (pd_next_buf())
558 break;
560 return Ok;
563 static enum action do_pd_write_done(void)
565 if (!pd_ready() && !time_after_eq(jiffies, pd_timeout))
566 return Hold;
568 if (pd_wait_for(pd_current, STAT_READY, "do_pd_write_done") & STAT_ERR) {
569 if (pd_retries < PD_MAX_RETRIES) {
570 pd_retries++;
571 phase = do_pd_write_start;
572 return Wait;
574 return Fail;
576 return Ok;
579 /* special io requests */
581 /* According to the ATA standard, the default CHS geometry should be
582 available following a reset. Some Western Digital drives come up
583 in a mode where only LBA addresses are accepted until the device
584 parameters are initialised.
587 static void pd_init_dev_parms(struct pd_unit *disk)
589 pd_wait_for(disk, 0, DBMSG("before init_dev_parms"));
590 pd_send_command(disk, disk->sectors, 0, disk->heads - 1, 0, 0,
591 IDE_INIT_DEV_PARMS);
592 udelay(300);
593 pd_wait_for(disk, 0, "Initialise device parameters");
596 static enum action pd_door_lock(struct pd_unit *disk)
598 if (!(pd_wait_for(disk, STAT_READY, "Lock") & STAT_ERR)) {
599 pd_send_command(disk, 1, 0, 0, 0, 0, IDE_DOORLOCK);
600 pd_wait_for(disk, STAT_READY, "Lock done");
602 return Ok;
605 static enum action pd_door_unlock(struct pd_unit *disk)
607 if (!(pd_wait_for(disk, STAT_READY, "Lock") & STAT_ERR)) {
608 pd_send_command(disk, 1, 0, 0, 0, 0, IDE_DOORUNLOCK);
609 pd_wait_for(disk, STAT_READY, "Lock done");
611 return Ok;
614 static enum action pd_eject(struct pd_unit *disk)
616 pd_wait_for(disk, 0, DBMSG("before unlock on eject"));
617 pd_send_command(disk, 1, 0, 0, 0, 0, IDE_DOORUNLOCK);
618 pd_wait_for(disk, 0, DBMSG("after unlock on eject"));
619 pd_wait_for(disk, 0, DBMSG("before eject"));
620 pd_send_command(disk, 0, 0, 0, 0, 0, IDE_EJECT);
621 pd_wait_for(disk, 0, DBMSG("after eject"));
622 return Ok;
625 static enum action pd_media_check(struct pd_unit *disk)
627 int r = pd_wait_for(disk, STAT_READY, DBMSG("before media_check"));
628 if (!(r & STAT_ERR)) {
629 pd_send_command(disk, 1, 1, 0, 0, 0, IDE_READ_VRFY);
630 r = pd_wait_for(disk, STAT_READY, DBMSG("RDY after READ_VRFY"));
631 } else
632 disk->changed = 1; /* say changed if other error */
633 if (r & ERR_MC) {
634 disk->changed = 1;
635 pd_send_command(disk, 1, 0, 0, 0, 0, IDE_ACKCHANGE);
636 pd_wait_for(disk, STAT_READY, DBMSG("RDY after ACKCHANGE"));
637 pd_send_command(disk, 1, 1, 0, 0, 0, IDE_READ_VRFY);
638 r = pd_wait_for(disk, STAT_READY, DBMSG("RDY after VRFY"));
640 return Ok;
643 static void pd_standby_off(struct pd_unit *disk)
645 pd_wait_for(disk, 0, DBMSG("before STANDBY"));
646 pd_send_command(disk, 0, 0, 0, 0, 0, IDE_STANDBY);
647 pd_wait_for(disk, 0, DBMSG("after STANDBY"));
650 static enum action pd_identify(struct pd_unit *disk)
652 int j;
653 char id[PD_ID_LEN + 1];
655 /* WARNING: here there may be dragons. reset() applies to both drives,
656 but we call it only on probing the MASTER. This should allow most
657 common configurations to work, but be warned that a reset can clear
658 settings on the SLAVE drive.
661 if (disk->drive == 0)
662 pd_reset(disk);
664 write_reg(disk, 6, DRIVE(disk));
665 pd_wait_for(disk, 0, DBMSG("before IDENT"));
666 pd_send_command(disk, 1, 0, 0, 0, 0, IDE_IDENTIFY);
668 if (pd_wait_for(disk, STAT_DRQ, DBMSG("IDENT DRQ")) & STAT_ERR)
669 return Fail;
670 pi_read_block(disk->pi, pd_scratch, 512);
671 disk->can_lba = pd_scratch[99] & 2;
672 disk->sectors = le16_to_cpu(*(__le16 *) (pd_scratch + 12));
673 disk->heads = le16_to_cpu(*(__le16 *) (pd_scratch + 6));
674 disk->cylinders = le16_to_cpu(*(__le16 *) (pd_scratch + 2));
675 if (disk->can_lba)
676 disk->capacity = le32_to_cpu(*(__le32 *) (pd_scratch + 120));
677 else
678 disk->capacity = disk->sectors * disk->heads * disk->cylinders;
680 for (j = 0; j < PD_ID_LEN; j++)
681 id[j ^ 1] = pd_scratch[j + PD_ID_OFF];
682 j = PD_ID_LEN - 1;
683 while ((j >= 0) && (id[j] <= 0x20))
684 j--;
685 j++;
686 id[j] = 0;
688 disk->removable = pd_scratch[0] & 0x80;
690 printk("%s: %s, %s, %d blocks [%dM], (%d/%d/%d), %s media\n",
691 disk->name, id,
692 disk->drive ? "slave" : "master",
693 disk->capacity, disk->capacity / 2048,
694 disk->cylinders, disk->heads, disk->sectors,
695 disk->removable ? "removable" : "fixed");
697 if (disk->capacity)
698 pd_init_dev_parms(disk);
699 if (!disk->standby)
700 pd_standby_off(disk);
702 return Ok;
705 /* end of io request engine */
707 static void do_pd_request(struct request_queue * q)
709 if (pd_req)
710 return;
711 pd_req = blk_fetch_request(q);
712 if (!pd_req)
713 return;
715 schedule_fsm();
718 static int pd_special_command(struct pd_unit *disk,
719 enum action (*func)(struct pd_unit *disk))
721 struct request *rq;
722 int err = 0;
724 rq = blk_get_request(disk->gd->queue, READ, __GFP_WAIT);
726 rq->cmd_type = REQ_TYPE_SPECIAL;
727 rq->special = func;
729 err = blk_execute_rq(disk->gd->queue, disk->gd, rq, 0);
731 blk_put_request(rq);
732 return err;
735 /* kernel glue structures */
737 static int pd_open(struct block_device *bdev, fmode_t mode)
739 struct pd_unit *disk = bdev->bd_disk->private_data;
741 mutex_lock(&pd_mutex);
742 disk->access++;
744 if (disk->removable) {
745 pd_special_command(disk, pd_media_check);
746 pd_special_command(disk, pd_door_lock);
748 mutex_unlock(&pd_mutex);
749 return 0;
752 static int pd_getgeo(struct block_device *bdev, struct hd_geometry *geo)
754 struct pd_unit *disk = bdev->bd_disk->private_data;
756 if (disk->alt_geom) {
757 geo->heads = PD_LOG_HEADS;
758 geo->sectors = PD_LOG_SECTS;
759 geo->cylinders = disk->capacity / (geo->heads * geo->sectors);
760 } else {
761 geo->heads = disk->heads;
762 geo->sectors = disk->sectors;
763 geo->cylinders = disk->cylinders;
766 return 0;
769 static int pd_ioctl(struct block_device *bdev, fmode_t mode,
770 unsigned int cmd, unsigned long arg)
772 struct pd_unit *disk = bdev->bd_disk->private_data;
774 switch (cmd) {
775 case CDROMEJECT:
776 mutex_lock(&pd_mutex);
777 if (disk->access == 1)
778 pd_special_command(disk, pd_eject);
779 mutex_unlock(&pd_mutex);
780 return 0;
781 default:
782 return -EINVAL;
786 static void pd_release(struct gendisk *p, fmode_t mode)
788 struct pd_unit *disk = p->private_data;
790 mutex_lock(&pd_mutex);
791 if (!--disk->access && disk->removable)
792 pd_special_command(disk, pd_door_unlock);
793 mutex_unlock(&pd_mutex);
796 static unsigned int pd_check_events(struct gendisk *p, unsigned int clearing)
798 struct pd_unit *disk = p->private_data;
799 int r;
800 if (!disk->removable)
801 return 0;
802 pd_special_command(disk, pd_media_check);
803 r = disk->changed;
804 disk->changed = 0;
805 return r ? DISK_EVENT_MEDIA_CHANGE : 0;
808 static int pd_revalidate(struct gendisk *p)
810 struct pd_unit *disk = p->private_data;
811 if (pd_special_command(disk, pd_identify) == 0)
812 set_capacity(p, disk->capacity);
813 else
814 set_capacity(p, 0);
815 return 0;
818 static const struct block_device_operations pd_fops = {
819 .owner = THIS_MODULE,
820 .open = pd_open,
821 .release = pd_release,
822 .ioctl = pd_ioctl,
823 .getgeo = pd_getgeo,
824 .check_events = pd_check_events,
825 .revalidate_disk= pd_revalidate
828 /* probing */
830 static void pd_probe_drive(struct pd_unit *disk)
832 struct gendisk *p = alloc_disk(1 << PD_BITS);
833 if (!p)
834 return;
835 strcpy(p->disk_name, disk->name);
836 p->fops = &pd_fops;
837 p->major = major;
838 p->first_minor = (disk - pd) << PD_BITS;
839 disk->gd = p;
840 p->private_data = disk;
841 p->queue = pd_queue;
843 if (disk->drive == -1) {
844 for (disk->drive = 0; disk->drive <= 1; disk->drive++)
845 if (pd_special_command(disk, pd_identify) == 0)
846 return;
847 } else if (pd_special_command(disk, pd_identify) == 0)
848 return;
849 disk->gd = NULL;
850 put_disk(p);
853 static int pd_detect(void)
855 int found = 0, unit, pd_drive_count = 0;
856 struct pd_unit *disk;
858 for (unit = 0; unit < PD_UNITS; unit++) {
859 int *parm = *drives[unit];
860 struct pd_unit *disk = pd + unit;
861 disk->pi = &disk->pia;
862 disk->access = 0;
863 disk->changed = 1;
864 disk->capacity = 0;
865 disk->drive = parm[D_SLV];
866 snprintf(disk->name, PD_NAMELEN, "%s%c", name, 'a'+unit);
867 disk->alt_geom = parm[D_GEO];
868 disk->standby = parm[D_SBY];
869 if (parm[D_PRT])
870 pd_drive_count++;
873 if (pd_drive_count == 0) { /* nothing spec'd - so autoprobe for 1 */
874 disk = pd;
875 if (pi_init(disk->pi, 1, -1, -1, -1, -1, -1, pd_scratch,
876 PI_PD, verbose, disk->name)) {
877 pd_probe_drive(disk);
878 if (!disk->gd)
879 pi_release(disk->pi);
882 } else {
883 for (unit = 0, disk = pd; unit < PD_UNITS; unit++, disk++) {
884 int *parm = *drives[unit];
885 if (!parm[D_PRT])
886 continue;
887 if (pi_init(disk->pi, 0, parm[D_PRT], parm[D_MOD],
888 parm[D_UNI], parm[D_PRO], parm[D_DLY],
889 pd_scratch, PI_PD, verbose, disk->name)) {
890 pd_probe_drive(disk);
891 if (!disk->gd)
892 pi_release(disk->pi);
896 for (unit = 0, disk = pd; unit < PD_UNITS; unit++, disk++) {
897 if (disk->gd) {
898 set_capacity(disk->gd, disk->capacity);
899 add_disk(disk->gd);
900 found = 1;
903 if (!found)
904 printk("%s: no valid drive found\n", name);
905 return found;
908 static int __init pd_init(void)
910 if (disable)
911 goto out1;
913 pd_queue = blk_init_queue(do_pd_request, &pd_lock);
914 if (!pd_queue)
915 goto out1;
917 blk_queue_max_hw_sectors(pd_queue, cluster);
919 if (register_blkdev(major, name))
920 goto out2;
922 printk("%s: %s version %s, major %d, cluster %d, nice %d\n",
923 name, name, PD_VERSION, major, cluster, nice);
924 if (!pd_detect())
925 goto out3;
927 return 0;
929 out3:
930 unregister_blkdev(major, name);
931 out2:
932 blk_cleanup_queue(pd_queue);
933 out1:
934 return -ENODEV;
937 static void __exit pd_exit(void)
939 struct pd_unit *disk;
940 int unit;
941 unregister_blkdev(major, name);
942 for (unit = 0, disk = pd; unit < PD_UNITS; unit++, disk++) {
943 struct gendisk *p = disk->gd;
944 if (p) {
945 disk->gd = NULL;
946 del_gendisk(p);
947 put_disk(p);
948 pi_release(disk->pi);
951 blk_cleanup_queue(pd_queue);
954 MODULE_LICENSE("GPL");
955 module_init(pd_init)
956 module_exit(pd_exit)