x86/xen: resume timer irqs early
[linux/fpc-iii.git] / drivers / gpio / gpio-mxc.c
blob3307f6db3a925fb3469c29f34eb69bfb93ca312a
1 /*
2 * MXC GPIO support. (c) 2008 Daniel Mack <daniel@caiaq.de>
3 * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
5 * Based on code from Freescale,
6 * Copyright (C) 2004-2010 Freescale Semiconductor, Inc. All Rights Reserved.
8 * This program is free software; you can redistribute it and/or
9 * modify it under the terms of the GNU General Public License
10 * as published by the Free Software Foundation; either version 2
11 * of the License, or (at your option) any later version.
12 * This program is distributed in the hope that it will be useful,
13 * but WITHOUT ANY WARRANTY; without even the implied warranty of
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 * GNU General Public License for more details.
17 * You should have received a copy of the GNU General Public License
18 * along with this program; if not, write to the Free Software
19 * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
22 #include <linux/err.h>
23 #include <linux/init.h>
24 #include <linux/interrupt.h>
25 #include <linux/io.h>
26 #include <linux/irq.h>
27 #include <linux/irqdomain.h>
28 #include <linux/irqchip/chained_irq.h>
29 #include <linux/gpio.h>
30 #include <linux/platform_device.h>
31 #include <linux/slab.h>
32 #include <linux/basic_mmio_gpio.h>
33 #include <linux/of.h>
34 #include <linux/of_device.h>
35 #include <linux/module.h>
36 #include <asm-generic/bug.h>
38 enum mxc_gpio_hwtype {
39 IMX1_GPIO, /* runs on i.mx1 */
40 IMX21_GPIO, /* runs on i.mx21 and i.mx27 */
41 IMX31_GPIO, /* runs on i.mx31 */
42 IMX35_GPIO, /* runs on all other i.mx */
45 /* device type dependent stuff */
46 struct mxc_gpio_hwdata {
47 unsigned dr_reg;
48 unsigned gdir_reg;
49 unsigned psr_reg;
50 unsigned icr1_reg;
51 unsigned icr2_reg;
52 unsigned imr_reg;
53 unsigned isr_reg;
54 int edge_sel_reg;
55 unsigned low_level;
56 unsigned high_level;
57 unsigned rise_edge;
58 unsigned fall_edge;
61 struct mxc_gpio_port {
62 struct list_head node;
63 void __iomem *base;
64 int irq;
65 int irq_high;
66 struct irq_domain *domain;
67 struct bgpio_chip bgc;
68 u32 both_edges;
71 static struct mxc_gpio_hwdata imx1_imx21_gpio_hwdata = {
72 .dr_reg = 0x1c,
73 .gdir_reg = 0x00,
74 .psr_reg = 0x24,
75 .icr1_reg = 0x28,
76 .icr2_reg = 0x2c,
77 .imr_reg = 0x30,
78 .isr_reg = 0x34,
79 .edge_sel_reg = -EINVAL,
80 .low_level = 0x03,
81 .high_level = 0x02,
82 .rise_edge = 0x00,
83 .fall_edge = 0x01,
86 static struct mxc_gpio_hwdata imx31_gpio_hwdata = {
87 .dr_reg = 0x00,
88 .gdir_reg = 0x04,
89 .psr_reg = 0x08,
90 .icr1_reg = 0x0c,
91 .icr2_reg = 0x10,
92 .imr_reg = 0x14,
93 .isr_reg = 0x18,
94 .edge_sel_reg = -EINVAL,
95 .low_level = 0x00,
96 .high_level = 0x01,
97 .rise_edge = 0x02,
98 .fall_edge = 0x03,
101 static struct mxc_gpio_hwdata imx35_gpio_hwdata = {
102 .dr_reg = 0x00,
103 .gdir_reg = 0x04,
104 .psr_reg = 0x08,
105 .icr1_reg = 0x0c,
106 .icr2_reg = 0x10,
107 .imr_reg = 0x14,
108 .isr_reg = 0x18,
109 .edge_sel_reg = 0x1c,
110 .low_level = 0x00,
111 .high_level = 0x01,
112 .rise_edge = 0x02,
113 .fall_edge = 0x03,
116 static enum mxc_gpio_hwtype mxc_gpio_hwtype;
117 static struct mxc_gpio_hwdata *mxc_gpio_hwdata;
119 #define GPIO_DR (mxc_gpio_hwdata->dr_reg)
120 #define GPIO_GDIR (mxc_gpio_hwdata->gdir_reg)
121 #define GPIO_PSR (mxc_gpio_hwdata->psr_reg)
122 #define GPIO_ICR1 (mxc_gpio_hwdata->icr1_reg)
123 #define GPIO_ICR2 (mxc_gpio_hwdata->icr2_reg)
124 #define GPIO_IMR (mxc_gpio_hwdata->imr_reg)
125 #define GPIO_ISR (mxc_gpio_hwdata->isr_reg)
126 #define GPIO_EDGE_SEL (mxc_gpio_hwdata->edge_sel_reg)
128 #define GPIO_INT_LOW_LEV (mxc_gpio_hwdata->low_level)
129 #define GPIO_INT_HIGH_LEV (mxc_gpio_hwdata->high_level)
130 #define GPIO_INT_RISE_EDGE (mxc_gpio_hwdata->rise_edge)
131 #define GPIO_INT_FALL_EDGE (mxc_gpio_hwdata->fall_edge)
132 #define GPIO_INT_BOTH_EDGES 0x4
134 static struct platform_device_id mxc_gpio_devtype[] = {
136 .name = "imx1-gpio",
137 .driver_data = IMX1_GPIO,
138 }, {
139 .name = "imx21-gpio",
140 .driver_data = IMX21_GPIO,
141 }, {
142 .name = "imx31-gpio",
143 .driver_data = IMX31_GPIO,
144 }, {
145 .name = "imx35-gpio",
146 .driver_data = IMX35_GPIO,
147 }, {
148 /* sentinel */
152 static const struct of_device_id mxc_gpio_dt_ids[] = {
153 { .compatible = "fsl,imx1-gpio", .data = &mxc_gpio_devtype[IMX1_GPIO], },
154 { .compatible = "fsl,imx21-gpio", .data = &mxc_gpio_devtype[IMX21_GPIO], },
155 { .compatible = "fsl,imx31-gpio", .data = &mxc_gpio_devtype[IMX31_GPIO], },
156 { .compatible = "fsl,imx35-gpio", .data = &mxc_gpio_devtype[IMX35_GPIO], },
157 { /* sentinel */ }
161 * MX2 has one interrupt *for all* gpio ports. The list is used
162 * to save the references to all ports, so that mx2_gpio_irq_handler
163 * can walk through all interrupt status registers.
165 static LIST_HEAD(mxc_gpio_ports);
167 /* Note: This driver assumes 32 GPIOs are handled in one register */
169 static int gpio_set_irq_type(struct irq_data *d, u32 type)
171 struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
172 struct mxc_gpio_port *port = gc->private;
173 u32 bit, val;
174 u32 gpio_idx = d->hwirq;
175 u32 gpio = port->bgc.gc.base + gpio_idx;
176 int edge;
177 void __iomem *reg = port->base;
179 port->both_edges &= ~(1 << gpio_idx);
180 switch (type) {
181 case IRQ_TYPE_EDGE_RISING:
182 edge = GPIO_INT_RISE_EDGE;
183 break;
184 case IRQ_TYPE_EDGE_FALLING:
185 edge = GPIO_INT_FALL_EDGE;
186 break;
187 case IRQ_TYPE_EDGE_BOTH:
188 if (GPIO_EDGE_SEL >= 0) {
189 edge = GPIO_INT_BOTH_EDGES;
190 } else {
191 val = gpio_get_value(gpio);
192 if (val) {
193 edge = GPIO_INT_LOW_LEV;
194 pr_debug("mxc: set GPIO %d to low trigger\n", gpio);
195 } else {
196 edge = GPIO_INT_HIGH_LEV;
197 pr_debug("mxc: set GPIO %d to high trigger\n", gpio);
199 port->both_edges |= 1 << gpio_idx;
201 break;
202 case IRQ_TYPE_LEVEL_LOW:
203 edge = GPIO_INT_LOW_LEV;
204 break;
205 case IRQ_TYPE_LEVEL_HIGH:
206 edge = GPIO_INT_HIGH_LEV;
207 break;
208 default:
209 return -EINVAL;
212 if (GPIO_EDGE_SEL >= 0) {
213 val = readl(port->base + GPIO_EDGE_SEL);
214 if (edge == GPIO_INT_BOTH_EDGES)
215 writel(val | (1 << gpio_idx),
216 port->base + GPIO_EDGE_SEL);
217 else
218 writel(val & ~(1 << gpio_idx),
219 port->base + GPIO_EDGE_SEL);
222 if (edge != GPIO_INT_BOTH_EDGES) {
223 reg += GPIO_ICR1 + ((gpio_idx & 0x10) >> 2); /* lower or upper register */
224 bit = gpio_idx & 0xf;
225 val = readl(reg) & ~(0x3 << (bit << 1));
226 writel(val | (edge << (bit << 1)), reg);
229 writel(1 << gpio_idx, port->base + GPIO_ISR);
231 return 0;
234 static void mxc_flip_edge(struct mxc_gpio_port *port, u32 gpio)
236 void __iomem *reg = port->base;
237 u32 bit, val;
238 int edge;
240 reg += GPIO_ICR1 + ((gpio & 0x10) >> 2); /* lower or upper register */
241 bit = gpio & 0xf;
242 val = readl(reg);
243 edge = (val >> (bit << 1)) & 3;
244 val &= ~(0x3 << (bit << 1));
245 if (edge == GPIO_INT_HIGH_LEV) {
246 edge = GPIO_INT_LOW_LEV;
247 pr_debug("mxc: switch GPIO %d to low trigger\n", gpio);
248 } else if (edge == GPIO_INT_LOW_LEV) {
249 edge = GPIO_INT_HIGH_LEV;
250 pr_debug("mxc: switch GPIO %d to high trigger\n", gpio);
251 } else {
252 pr_err("mxc: invalid configuration for GPIO %d: %x\n",
253 gpio, edge);
254 return;
256 writel(val | (edge << (bit << 1)), reg);
259 /* handle 32 interrupts in one status register */
260 static void mxc_gpio_irq_handler(struct mxc_gpio_port *port, u32 irq_stat)
262 while (irq_stat != 0) {
263 int irqoffset = fls(irq_stat) - 1;
265 if (port->both_edges & (1 << irqoffset))
266 mxc_flip_edge(port, irqoffset);
268 generic_handle_irq(irq_find_mapping(port->domain, irqoffset));
270 irq_stat &= ~(1 << irqoffset);
274 /* MX1 and MX3 has one interrupt *per* gpio port */
275 static void mx3_gpio_irq_handler(u32 irq, struct irq_desc *desc)
277 u32 irq_stat;
278 struct mxc_gpio_port *port = irq_get_handler_data(irq);
279 struct irq_chip *chip = irq_get_chip(irq);
281 chained_irq_enter(chip, desc);
283 irq_stat = readl(port->base + GPIO_ISR) & readl(port->base + GPIO_IMR);
285 mxc_gpio_irq_handler(port, irq_stat);
287 chained_irq_exit(chip, desc);
290 /* MX2 has one interrupt *for all* gpio ports */
291 static void mx2_gpio_irq_handler(u32 irq, struct irq_desc *desc)
293 u32 irq_msk, irq_stat;
294 struct mxc_gpio_port *port;
295 struct irq_chip *chip = irq_get_chip(irq);
297 chained_irq_enter(chip, desc);
299 /* walk through all interrupt status registers */
300 list_for_each_entry(port, &mxc_gpio_ports, node) {
301 irq_msk = readl(port->base + GPIO_IMR);
302 if (!irq_msk)
303 continue;
305 irq_stat = readl(port->base + GPIO_ISR) & irq_msk;
306 if (irq_stat)
307 mxc_gpio_irq_handler(port, irq_stat);
309 chained_irq_exit(chip, desc);
313 * Set interrupt number "irq" in the GPIO as a wake-up source.
314 * While system is running, all registered GPIO interrupts need to have
315 * wake-up enabled. When system is suspended, only selected GPIO interrupts
316 * need to have wake-up enabled.
317 * @param irq interrupt source number
318 * @param enable enable as wake-up if equal to non-zero
319 * @return This function returns 0 on success.
321 static int gpio_set_wake_irq(struct irq_data *d, u32 enable)
323 struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
324 struct mxc_gpio_port *port = gc->private;
325 u32 gpio_idx = d->hwirq;
327 if (enable) {
328 if (port->irq_high && (gpio_idx >= 16))
329 enable_irq_wake(port->irq_high);
330 else
331 enable_irq_wake(port->irq);
332 } else {
333 if (port->irq_high && (gpio_idx >= 16))
334 disable_irq_wake(port->irq_high);
335 else
336 disable_irq_wake(port->irq);
339 return 0;
342 static void __init mxc_gpio_init_gc(struct mxc_gpio_port *port, int irq_base)
344 struct irq_chip_generic *gc;
345 struct irq_chip_type *ct;
347 gc = irq_alloc_generic_chip("gpio-mxc", 1, irq_base,
348 port->base, handle_level_irq);
349 gc->private = port;
351 ct = gc->chip_types;
352 ct->chip.irq_ack = irq_gc_ack_set_bit;
353 ct->chip.irq_mask = irq_gc_mask_clr_bit;
354 ct->chip.irq_unmask = irq_gc_mask_set_bit;
355 ct->chip.irq_set_type = gpio_set_irq_type;
356 ct->chip.irq_set_wake = gpio_set_wake_irq;
357 ct->regs.ack = GPIO_ISR;
358 ct->regs.mask = GPIO_IMR;
360 irq_setup_generic_chip(gc, IRQ_MSK(32), IRQ_GC_INIT_NESTED_LOCK,
361 IRQ_NOREQUEST, 0);
364 static void mxc_gpio_get_hw(struct platform_device *pdev)
366 const struct of_device_id *of_id =
367 of_match_device(mxc_gpio_dt_ids, &pdev->dev);
368 enum mxc_gpio_hwtype hwtype;
370 if (of_id)
371 pdev->id_entry = of_id->data;
372 hwtype = pdev->id_entry->driver_data;
374 if (mxc_gpio_hwtype) {
376 * The driver works with a reasonable presupposition,
377 * that is all gpio ports must be the same type when
378 * running on one soc.
380 BUG_ON(mxc_gpio_hwtype != hwtype);
381 return;
384 if (hwtype == IMX35_GPIO)
385 mxc_gpio_hwdata = &imx35_gpio_hwdata;
386 else if (hwtype == IMX31_GPIO)
387 mxc_gpio_hwdata = &imx31_gpio_hwdata;
388 else
389 mxc_gpio_hwdata = &imx1_imx21_gpio_hwdata;
391 mxc_gpio_hwtype = hwtype;
394 static int mxc_gpio_to_irq(struct gpio_chip *gc, unsigned offset)
396 struct bgpio_chip *bgc = to_bgpio_chip(gc);
397 struct mxc_gpio_port *port =
398 container_of(bgc, struct mxc_gpio_port, bgc);
400 return irq_find_mapping(port->domain, offset);
403 static int mxc_gpio_probe(struct platform_device *pdev)
405 struct device_node *np = pdev->dev.of_node;
406 struct mxc_gpio_port *port;
407 struct resource *iores;
408 int irq_base;
409 int err;
411 mxc_gpio_get_hw(pdev);
413 port = devm_kzalloc(&pdev->dev, sizeof(*port), GFP_KERNEL);
414 if (!port)
415 return -ENOMEM;
417 iores = platform_get_resource(pdev, IORESOURCE_MEM, 0);
418 port->base = devm_ioremap_resource(&pdev->dev, iores);
419 if (IS_ERR(port->base))
420 return PTR_ERR(port->base);
422 port->irq_high = platform_get_irq(pdev, 1);
423 port->irq = platform_get_irq(pdev, 0);
424 if (port->irq < 0)
425 return -EINVAL;
427 /* disable the interrupt and clear the status */
428 writel(0, port->base + GPIO_IMR);
429 writel(~0, port->base + GPIO_ISR);
431 if (mxc_gpio_hwtype == IMX21_GPIO) {
433 * Setup one handler for all GPIO interrupts. Actually setting
434 * the handler is needed only once, but doing it for every port
435 * is more robust and easier.
437 irq_set_chained_handler(port->irq, mx2_gpio_irq_handler);
438 } else {
439 /* setup one handler for each entry */
440 irq_set_chained_handler(port->irq, mx3_gpio_irq_handler);
441 irq_set_handler_data(port->irq, port);
442 if (port->irq_high > 0) {
443 /* setup handler for GPIO 16 to 31 */
444 irq_set_chained_handler(port->irq_high,
445 mx3_gpio_irq_handler);
446 irq_set_handler_data(port->irq_high, port);
450 err = bgpio_init(&port->bgc, &pdev->dev, 4,
451 port->base + GPIO_PSR,
452 port->base + GPIO_DR, NULL,
453 port->base + GPIO_GDIR, NULL, 0);
454 if (err)
455 goto out_bgio;
457 port->bgc.gc.to_irq = mxc_gpio_to_irq;
458 port->bgc.gc.base = (pdev->id < 0) ? of_alias_get_id(np, "gpio") * 32 :
459 pdev->id * 32;
461 err = gpiochip_add(&port->bgc.gc);
462 if (err)
463 goto out_bgpio_remove;
465 irq_base = irq_alloc_descs(-1, 0, 32, numa_node_id());
466 if (irq_base < 0) {
467 err = irq_base;
468 goto out_gpiochip_remove;
471 port->domain = irq_domain_add_legacy(np, 32, irq_base, 0,
472 &irq_domain_simple_ops, NULL);
473 if (!port->domain) {
474 err = -ENODEV;
475 goto out_irqdesc_free;
478 /* gpio-mxc can be a generic irq chip */
479 mxc_gpio_init_gc(port, irq_base);
481 list_add_tail(&port->node, &mxc_gpio_ports);
483 return 0;
485 out_irqdesc_free:
486 irq_free_descs(irq_base, 32);
487 out_gpiochip_remove:
488 WARN_ON(gpiochip_remove(&port->bgc.gc) < 0);
489 out_bgpio_remove:
490 bgpio_remove(&port->bgc);
491 out_bgio:
492 dev_info(&pdev->dev, "%s failed with errno %d\n", __func__, err);
493 return err;
496 static struct platform_driver mxc_gpio_driver = {
497 .driver = {
498 .name = "gpio-mxc",
499 .owner = THIS_MODULE,
500 .of_match_table = mxc_gpio_dt_ids,
502 .probe = mxc_gpio_probe,
503 .id_table = mxc_gpio_devtype,
506 static int __init gpio_mxc_init(void)
508 return platform_driver_register(&mxc_gpio_driver);
510 postcore_initcall(gpio_mxc_init);
512 MODULE_AUTHOR("Freescale Semiconductor, "
513 "Daniel Mack <danielncaiaq.de>, "
514 "Juergen Beisert <kernel@pengutronix.de>");
515 MODULE_DESCRIPTION("Freescale MXC GPIO");
516 MODULE_LICENSE("GPL");