2 # Drm device configuration
4 # This driver provides support for the
5 # Direct Rendering Infrastructure (DRI) in XFree86 4.1.0 and higher.
8 tristate "Direct Rendering Manager (XFree86 4.1.0 and higher DRI support)"
9 depends on (AGP || AGP=n) && !EMULATED_CMPXCHG && MMU && HAS_DMA
13 select DMA_SHARED_BUFFER
15 Kernel-level support for the Direct Rendering Infrastructure (DRI)
16 introduced in XFree86 4.0. If you say Y here, you need to select
17 the module that's right for your graphics card from the list below.
18 These modules provide support for synchronization, security, and
19 DMA transfers. Please see <http://dri.sourceforge.net/> for more
20 details. You should also select and configure AGP
21 (/dev/agpgart) support if it is available for your platform.
26 depends on USB_SUPPORT && USB_ARCH_HAS_HCD
33 select FRAMEBUFFER_CONSOLE if !EXPERT
34 select FRAMEBUFFER_CONSOLE_DETECT_PRIMARY if FRAMEBUFFER_CONSOLE
36 FB and CRTC helpers for KMS drivers.
38 config DRM_LOAD_EDID_FIRMWARE
39 bool "Allow to specify an EDID data set instead of probing for it"
40 depends on DRM_KMS_HELPER
42 Say Y here, if you want to use EDID data to be loaded from the
43 /lib/firmware directory or one of the provided built-in
44 data sets. This may be necessary, if the graphics adapter or
45 monitor are unable to provide appropriate EDID data. Since this
46 feature is provided as a workaround for broken hardware, the
47 default case is N. Details and instructions how to build your own
48 EDID data are given in Documentation/EDID/HOWTO.txt.
54 GPU memory management subsystem for devices with multiple
55 GPU memory types. Will be enabled automatically if a device driver
58 config DRM_GEM_CMA_HELPER
62 Choose this if you need the GEM CMA helper functions
64 config DRM_KMS_CMA_HELPER
66 select DRM_GEM_CMA_HELPER
67 select FB_SYS_FILLRECT
68 select FB_SYS_COPYAREA
69 select FB_SYS_IMAGEBLIT
71 Choose this if you need the KMS CMA helper functions
73 source "drivers/gpu/drm/i2c/Kconfig"
76 tristate "3dfx Banshee/Voodoo3+"
79 Choose this option if you have a 3dfx Banshee or Voodoo3 (or later),
80 graphics card. If M is selected, the module will be called tdfx.
83 tristate "ATI Rage 128"
87 Choose this option if you have an ATI Rage 128 graphics card. If M
88 is selected, the module will be called r128. AGP support for
89 this card is strongly suggested (unless you have a PCI version).
94 select FB_CFB_FILLRECT
95 select FB_CFB_COPYAREA
96 select FB_CFB_IMAGEBLIT
102 select BACKLIGHT_CLASS_DEVICE
104 Choose this option if you have an ATI Radeon graphics card. There
105 are both PCI and AGP versions. You don't need to choose this to
106 run the Radeon in plain VGA mode.
108 If M is selected, the module will be called radeon.
110 source "drivers/gpu/drm/radeon/Kconfig"
112 source "drivers/gpu/drm/nouveau/Kconfig"
115 tristate "Intel I810"
116 # !PREEMPT because of missing ioctl locking
117 depends on DRM && AGP && AGP_INTEL && (!PREEMPT || BROKEN)
119 Choose this option if you have an Intel I810 graphics card. If M is
120 selected, the module will be called i810. AGP support is required
121 for this driver to work.
124 tristate "Intel 8xx/9xx/G3x/G4x/HD Graphics"
128 # we need shmfs for the swappable backing store, and in particular
129 # the shmem_readpage() which depends upon tmpfs
132 select DRM_KMS_HELPER
133 select FB_CFB_FILLRECT
134 select FB_CFB_COPYAREA
135 select FB_CFB_IMAGEBLIT
136 # i915 depends on ACPI_VIDEO when ACPI is enabled
137 # but for select to work, need to select ACPI_VIDEO's dependencies, ick
138 select BACKLIGHT_LCD_SUPPORT if ACPI
139 select BACKLIGHT_CLASS_DEVICE if ACPI
140 select VIDEO_OUTPUT_CONTROL if ACPI
142 select THERMAL if ACPI
143 select ACPI_VIDEO if ACPI
144 select ACPI_BUTTON if ACPI
146 Choose this option if you have a system that has "Intel Graphics
147 Media Accelerator" or "HD Graphics" integrated graphics,
148 including 830M, 845G, 852GM, 855GM, 865G, 915G, 945G, 965G,
149 G35, G41, G43, G45 chipsets and Celeron, Pentium, Core i3,
150 Core i5, Core i7 as well as Atom CPUs with integrated graphics.
151 If M is selected, the module will be called i915. AGP support
152 is required for this driver to work. This driver is used by
153 the Intel driver in X.org 6.8 and XFree86 4.4 and above. It
154 replaces the older i830 module that supported a subset of the
155 hardware in older X.org releases.
157 Note that the older i810/i815 chipsets require the use of the
158 i810 driver instead, and the Atom z5xx series has an entirely
159 different implementation.
162 bool "Enable modesetting on intel by default"
165 Choose this option if you want kernel modesetting enabled by default,
166 and you have a new enough userspace to support this. Running old
167 userspaces with this enabled will cause pain. Note that this causes
168 the driver to bind to PCI devices, which precludes loading things
171 config DRM_I915_PRELIMINARY_HW_SUPPORT
172 bool "Enable preliminary support for prerelease Intel hardware by default"
175 Choose this option if you have prerelease Intel hardware and want the
176 i915 driver to support it by default. You can enable such support at
177 runtime with the module option i915.preliminary_hw_support=1; this
178 option changes the default for that module option.
180 If in doubt, say "N".
183 tristate "Matrox g200/g400"
184 depends on DRM && PCI
187 Choose this option if you have a Matrox G200, G400 or G450 graphics
188 card. If M is selected, the module will be called mga. AGP
189 support is required for this driver to work.
192 tristate "SiS video cards"
193 depends on DRM && AGP
194 depends on FB_SIS || FB_SIS=n
196 Choose this option if you have a SiS 630 or compatible video
197 chipset. If M is selected the module will be called sis. AGP
198 support is required for this driver to work.
201 tristate "Via unichrome video cards"
202 depends on DRM && PCI
204 Choose this option if you have a Via unichrome or compatible video
205 chipset. If M is selected the module will be called via.
208 tristate "Savage video cards"
209 depends on DRM && PCI
211 Choose this option if you have a Savage3D/4/SuperSavage/Pro/Twister
212 chipset. If M is selected the module will be called savage.
214 source "drivers/gpu/drm/exynos/Kconfig"
216 source "drivers/gpu/drm/vmwgfx/Kconfig"
218 source "drivers/gpu/drm/gma500/Kconfig"
220 source "drivers/gpu/drm/udl/Kconfig"
222 source "drivers/gpu/drm/ast/Kconfig"
224 source "drivers/gpu/drm/mgag200/Kconfig"
226 source "drivers/gpu/drm/cirrus/Kconfig"
228 source "drivers/gpu/drm/rcar-du/Kconfig"
230 source "drivers/gpu/drm/shmobile/Kconfig"
232 source "drivers/gpu/drm/omapdrm/Kconfig"
234 source "drivers/gpu/drm/tilcdc/Kconfig"
236 source "drivers/gpu/drm/qxl/Kconfig"
238 source "drivers/gpu/drm/msm/Kconfig"