2 * Copyright (c) 2006 Intel Corporation
4 * This program is free software; you can redistribute it and/or modify it
5 * under the terms and conditions of the GNU General Public License,
6 * version 2, as published by the Free Software Foundation.
8 * This program is distributed in the hope it will be useful, but WITHOUT
9 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
10 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
13 * You should have received a copy of the GNU General Public License along with
14 * this program; if not, write to the Free Software Foundation, Inc.,
15 * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
18 * Eric Anholt <eric@anholt.net>
22 #ifndef _INTEL_BIOS_H_
23 #define _INTEL_BIOS_H_
26 #include <drm/drm_dp_helper.h>
29 u8 signature
[20]; /**< Always starts with 'VBT$' */
30 u16 version
; /**< decimal */
31 u16 header_size
; /**< in bytes */
32 u16 vbt_size
; /**< in bytes */
35 u32 bdb_offset
; /**< from beginning of VBT */
36 u32 aim_offset
[4]; /**< from beginning of VBT */
37 } __attribute__((packed
));
41 u8 signature
[16]; /**< Always 'BIOS_DATA_BLOCK' */
42 u16 version
; /**< decimal */
43 u16 header_size
; /**< in bytes */
44 u16 bdb_size
; /**< in bytes */
47 /* strictly speaking, this is a "skip" block, but it has interesting info */
49 u8 type
; /* 0 == desktop, 1 == mobile */
54 u8 rsvd2
:6; /* finish byte */
61 u8 rsvd4
; /* popup memory size */
63 u8 rsvd5
; /* is crt already on ddc2 */
64 } __attribute__((packed
));
67 * There are several types of BIOS data blocks (BDBs), each block has
68 * an ID and size in the first 3 bytes (ID in first, size in next 2).
69 * Known types are listed below.
71 #define BDB_GENERAL_FEATURES 1
72 #define BDB_GENERAL_DEFINITIONS 2
73 #define BDB_OLD_TOGGLE_LIST 3
74 #define BDB_MODE_SUPPORT_LIST 4
75 #define BDB_GENERIC_MODE_TABLE 5
76 #define BDB_EXT_MMIO_REGS 6
78 #define BDB_SWF_MMIO 8
79 #define BDB_DOT_CLOCK_TABLE 9
80 #define BDB_MODE_REMOVAL_TABLE 10
81 #define BDB_CHILD_DEVICE_TABLE 11
82 #define BDB_DRIVER_FEATURES 12
83 #define BDB_DRIVER_PERSISTENCE 13
84 #define BDB_EXT_TABLE_PTRS 14
85 #define BDB_DOT_CLOCK_OVERRIDE 15
86 #define BDB_DISPLAY_SELECT 16
88 #define BDB_DRIVER_ROTATION 18
89 #define BDB_DISPLAY_REMOVE 19
90 #define BDB_OEM_CUSTOM 20
91 #define BDB_EFP_LIST 21 /* workarounds for VGA hsync/vsync */
92 #define BDB_SDVO_LVDS_OPTIONS 22
93 #define BDB_SDVO_PANEL_DTDS 23
94 #define BDB_SDVO_LVDS_PNP_IDS 24
95 #define BDB_SDVO_LVDS_POWER_SEQ 25
96 #define BDB_TV_OPTIONS 26
98 #define BDB_LVDS_OPTIONS 40
99 #define BDB_LVDS_LFP_DATA_PTRS 41
100 #define BDB_LVDS_LFP_DATA 42
101 #define BDB_LVDS_BACKLIGHT 43
102 #define BDB_LVDS_POWER 44
103 #define BDB_SKIP 254 /* VBIOS private block, ignore */
105 struct bdb_general_features
{
114 u8 download_ext_vbt
:1;
117 u8 enable_lfp_on_override
:1;
118 u8 disable_ssc_ddt
:1;
119 u8 rsvd8
:3; /* finish byte */
122 u8 disable_smooth_vision
:1;
124 u8 rsvd9
:6; /* finish byte */
127 u8 legacy_monitor_detect
;
130 u8 int_crt_support
:1;
132 u8 int_efp_support
:1;
133 u8 dp_ssc_enb
:1; /* PCH attached eDP supports SSC */
134 u8 dp_ssc_freq
:1; /* SSC freq for PCH attached eDP */
135 u8 rsvd11
:3; /* finish byte */
136 } __attribute__((packed
));
139 #define GPIO_PIN_DVI_LVDS 0x03 /* "DVI/LVDS DDC GPIO pins" */
140 #define GPIO_PIN_ADD_I2C 0x05 /* "ADDCARD I2C GPIO pins" */
141 #define GPIO_PIN_ADD_DDC 0x04 /* "ADDCARD DDC GPIO pins" */
142 #define GPIO_PIN_ADD_DDC_I2C 0x06 /* "ADDCARD DDC/I2C GPIO pins" */
145 #define DEVICE_TYPE_NONE 0x00
146 #define DEVICE_TYPE_CRT 0x01
147 #define DEVICE_TYPE_TV 0x09
148 #define DEVICE_TYPE_EFP 0x12
149 #define DEVICE_TYPE_LFP 0x22
151 #define DEVICE_TYPE_CRT_DPMS 0x6001
152 #define DEVICE_TYPE_CRT_DPMS_HOTPLUG 0x4001
153 #define DEVICE_TYPE_TV_COMPOSITE 0x0209
154 #define DEVICE_TYPE_TV_MACROVISION 0x0289
155 #define DEVICE_TYPE_TV_RF_COMPOSITE 0x020c
156 #define DEVICE_TYPE_TV_SVIDEO_COMPOSITE 0x0609
157 #define DEVICE_TYPE_TV_SCART 0x0209
158 #define DEVICE_TYPE_TV_CODEC_HOTPLUG_PWR 0x6009
159 #define DEVICE_TYPE_EFP_HOTPLUG_PWR 0x6012
160 #define DEVICE_TYPE_EFP_DVI_HOTPLUG_PWR 0x6052
161 #define DEVICE_TYPE_EFP_DVI_I 0x6053
162 #define DEVICE_TYPE_EFP_DVI_D_DUAL 0x6152
163 #define DEVICE_TYPE_EFP_DVI_D_HDCP 0x60d2
164 #define DEVICE_TYPE_OPENLDI_HOTPLUG_PWR 0x6062
165 #define DEVICE_TYPE_OPENLDI_DUALPIX 0x6162
166 #define DEVICE_TYPE_LFP_PANELLINK 0x5012
167 #define DEVICE_TYPE_LFP_CMOS_PWR 0x5042
168 #define DEVICE_TYPE_LFP_LVDS_PWR 0x5062
169 #define DEVICE_TYPE_LFP_LVDS_DUAL 0x5162
170 #define DEVICE_TYPE_LFP_LVDS_DUAL_HDCP 0x51e2
172 #define DEVICE_CFG_NONE 0x00
173 #define DEVICE_CFG_12BIT_DVOB 0x01
174 #define DEVICE_CFG_12BIT_DVOC 0x02
175 #define DEVICE_CFG_24BIT_DVOBC 0x09
176 #define DEVICE_CFG_24BIT_DVOCB 0x0a
177 #define DEVICE_CFG_DUAL_DVOB 0x11
178 #define DEVICE_CFG_DUAL_DVOC 0x12
179 #define DEVICE_CFG_DUAL_DVOBC 0x13
180 #define DEVICE_CFG_DUAL_LINK_DVOBC 0x19
181 #define DEVICE_CFG_DUAL_LINK_DVOCB 0x1a
183 #define DEVICE_WIRE_NONE 0x00
184 #define DEVICE_WIRE_DVOB 0x01
185 #define DEVICE_WIRE_DVOC 0x02
186 #define DEVICE_WIRE_DVOBC 0x03
187 #define DEVICE_WIRE_DVOBB 0x05
188 #define DEVICE_WIRE_DVOCC 0x06
189 #define DEVICE_WIRE_DVOB_MASTER 0x0d
190 #define DEVICE_WIRE_DVOC_MASTER 0x0e
192 #define DEVICE_PORT_DVOA 0x00 /* none on 845+ */
193 #define DEVICE_PORT_DVOB 0x01
194 #define DEVICE_PORT_DVOC 0x02
196 struct child_device_config
{
199 u8 device_id
[10]; /* ascii string */
201 u8 dvo_port
; /* See Device_PORT_* above */
206 u8 dvo_cfg
; /* See DEVICE_CFG_* above */
212 u8 dvo_wiring
;/* See DEVICE_WIRE_* above */
216 } __attribute__((packed
));
219 struct bdb_general_definitions
{
221 u8 crt_ddc_gmbus_pin
;
225 u8 skip_boot_crt_detect
:1;
227 u8 rsvd1
:5; /* finish byte */
229 /* boot device bits */
235 * If TV is present, it'll be at devices[0].
236 * LVDS will be next, either devices[0] or [1], if present.
237 * On some platforms the number of device is 6. But could be as few as
238 * 4 if both TV and LVDS are missing.
239 * And the device num is related with the size of general definition
240 * block. It is obtained by using the following formula:
241 * number = (block_size - sizeof(bdb_general_definitions))/
242 * sizeof(child_device_config);
244 struct child_device_config devices
[0];
247 struct bdb_lvds_options
{
250 /* LVDS capabilities, stored in a dword */
252 u8 pfit_text_mode_enhanced
:1;
253 u8 pfit_gfx_mode_enhanced
:1;
254 u8 pfit_ratio_auto
:1;
259 } __attribute__((packed
));
261 struct bdb_lvds_backlight
{
271 } __attribute__((packed
));
273 /* LFP pointer table contains entries to the struct below */
274 struct bdb_lvds_lfp_data_ptr
{
275 u16 fp_timing_offset
; /* offsets are from start of bdb */
277 u16 dvo_timing_offset
;
279 u16 panel_pnp_id_offset
;
281 } __attribute__((packed
));
283 struct bdb_lvds_lfp_data_ptrs
{
284 u8 lvds_entries
; /* followed by one or more lvds_data_ptr structs */
285 struct bdb_lvds_lfp_data_ptr ptr
[16];
286 } __attribute__((packed
));
288 /* LFP data has 3 blocks per entry */
289 struct lvds_fp_timing
{
299 u32 pp_cycle_reg_val
;
303 } __attribute__((packed
));
305 struct lvds_dvo_timing
{
306 u16 clock
; /**< In 10khz */
316 u8 hsync_pulse_width
;
317 u8 vsync_pulse_width
:4;
331 } __attribute__((packed
));
339 } __attribute__((packed
));
341 struct bdb_lvds_lfp_data_entry
{
342 struct lvds_fp_timing fp_timing
;
343 struct lvds_dvo_timing dvo_timing
;
344 struct lvds_pnp_id pnp_id
;
345 } __attribute__((packed
));
347 struct bdb_lvds_lfp_data
{
348 struct bdb_lvds_lfp_data_entry data
[16];
349 } __attribute__((packed
));
351 struct aimdb_header
{
355 u16 aimdb_header_size
;
357 } __attribute__((packed
));
362 } __attribute__((packed
));
364 struct vch_panel_data
{
365 u16 fp_timing_offset
;
367 u16 dvo_timing_offset
;
369 u16 text_fitting_offset
;
370 u8 text_fitting_size
;
371 u16 graphics_fitting_offset
;
372 u8 graphics_fitting_size
;
373 } __attribute__((packed
));
376 struct aimdb_block aimdb_block
;
377 struct vch_panel_data panels
[16];
378 } __attribute__((packed
));
380 struct bdb_sdvo_lvds_options
{
382 u8 h40_set_panel_type
;
387 u8 sclalarcoeff_tab_row_num
;
388 u8 sclalarcoeff_tab_row_size
;
390 u8 panel_misc_bits_1
;
391 u8 panel_misc_bits_2
;
392 u8 panel_misc_bits_3
;
393 u8 panel_misc_bits_4
;
394 } __attribute__((packed
));
396 #define BDB_DRIVER_FEATURE_NO_LVDS 0
397 #define BDB_DRIVER_FEATURE_INT_LVDS 1
398 #define BDB_DRIVER_FEATURE_SDVO_LVDS 2
399 #define BDB_DRIVER_FEATURE_EDP 3
401 struct bdb_driver_features
{
402 u8 boot_dev_algorithm
:1;
403 u8 block_display_switch
:1;
404 u8 allow_display_switch
:1;
408 u8 sprite_in_clone
:1;
414 u8 boot_mode_refresh
;
416 u16 enable_lfp_primary
:1;
417 u16 selective_mode_pruning
:1;
418 u16 dual_frequency
:1;
419 u16 render_clock_freq
:1; /* 0: high freq; 1: low freq */
420 u16 nt_clone_support
:1;
421 u16 power_scheme_ui
:1; /* 0: CUI; 1: 3rd party */
422 u16 sprite_display_assign
:1; /* 0: secondary; 1: primary */
423 u16 cui_aspect_scaling
:1;
424 u16 preserve_aspect_ratio
:1;
425 u16 sdvo_device_power_down
:1;
433 u16 legacy_crt_max_x
;
434 u16 legacy_crt_max_y
;
435 u8 legacy_crt_max_refresh
;
438 u8 custom_vbt_version
;
439 } __attribute__((packed
));
444 #define EDP_RATE_1_62 0
445 #define EDP_RATE_2_7 1
449 #define EDP_PREEMPHASIS_NONE 0
450 #define EDP_PREEMPHASIS_3_5dB 1
451 #define EDP_PREEMPHASIS_6dB 2
452 #define EDP_PREEMPHASIS_9_5dB 3
453 #define EDP_VSWING_0_4V 0
454 #define EDP_VSWING_0_6V 1
455 #define EDP_VSWING_0_8V 2
456 #define EDP_VSWING_1_2V 3
458 struct edp_power_seq
{
464 } __attribute__ ((packed
));
466 struct edp_link_params
{
471 } __attribute__ ((packed
));
474 struct edp_power_seq power_seqs
[16];
476 u32 sdrrs_msa_timing_delay
;
477 struct edp_link_params link_params
[16];
478 } __attribute__ ((packed
));
480 extern int psb_intel_init_bios(struct drm_device
*dev
);
481 extern void psb_intel_destroy_bios(struct drm_device
*dev
);
484 * Driver<->VBIOS interaction occurs through scratch bits in
488 /* GR18 bits are set on display switch and hotkey events */
489 #define GR18_DRIVER_SWITCH_EN (1<<7) /* 0: VBIOS control, 1: driver control */
490 #define GR18_HOTKEY_MASK 0x78 /* See also SWF4 15:0 */
491 #define GR18_HK_NONE (0x0<<3)
492 #define GR18_HK_LFP_STRETCH (0x1<<3)
493 #define GR18_HK_TOGGLE_DISP (0x2<<3)
494 #define GR18_HK_DISP_SWITCH (0x4<<3) /* see SWF14 15:0 for what to enable */
495 #define GR18_HK_POPUP_DISABLED (0x6<<3)
496 #define GR18_HK_POPUP_ENABLED (0x7<<3)
497 #define GR18_HK_PFIT (0x8<<3)
498 #define GR18_HK_APM_CHANGE (0xa<<3)
499 #define GR18_HK_MULTIPLE (0xc<<3)
500 #define GR18_USER_INT_EN (1<<2)
501 #define GR18_A0000_FLUSH_EN (1<<1)
502 #define GR18_SMM_EN (1<<0)
504 /* Set by driver, cleared by VBIOS */
505 #define SWF00_YRES_SHIFT 16
506 #define SWF00_XRES_SHIFT 0
507 #define SWF00_RES_MASK 0xffff
509 /* Set by VBIOS at boot time and driver at runtime */
510 #define SWF01_TV2_FORMAT_SHIFT 8
511 #define SWF01_TV1_FORMAT_SHIFT 0
512 #define SWF01_TV_FORMAT_MASK 0xffff
514 #define SWF10_VBIOS_BLC_I2C_EN (1<<29)
515 #define SWF10_GTT_OVERRIDE_EN (1<<28)
516 #define SWF10_LFP_DPMS_OVR (1<<27) /* override DPMS on display switch */
517 #define SWF10_ACTIVE_TOGGLE_LIST_MASK (7<<24)
518 #define SWF10_OLD_TOGGLE 0x0
519 #define SWF10_TOGGLE_LIST_1 0x1
520 #define SWF10_TOGGLE_LIST_2 0x2
521 #define SWF10_TOGGLE_LIST_3 0x3
522 #define SWF10_TOGGLE_LIST_4 0x4
523 #define SWF10_PANNING_EN (1<<23)
524 #define SWF10_DRIVER_LOADED (1<<22)
525 #define SWF10_EXTENDED_DESKTOP (1<<21)
526 #define SWF10_EXCLUSIVE_MODE (1<<20)
527 #define SWF10_OVERLAY_EN (1<<19)
528 #define SWF10_PLANEB_HOLDOFF (1<<18)
529 #define SWF10_PLANEA_HOLDOFF (1<<17)
530 #define SWF10_VGA_HOLDOFF (1<<16)
531 #define SWF10_ACTIVE_DISP_MASK 0xffff
532 #define SWF10_PIPEB_LFP2 (1<<15)
533 #define SWF10_PIPEB_EFP2 (1<<14)
534 #define SWF10_PIPEB_TV2 (1<<13)
535 #define SWF10_PIPEB_CRT2 (1<<12)
536 #define SWF10_PIPEB_LFP (1<<11)
537 #define SWF10_PIPEB_EFP (1<<10)
538 #define SWF10_PIPEB_TV (1<<9)
539 #define SWF10_PIPEB_CRT (1<<8)
540 #define SWF10_PIPEA_LFP2 (1<<7)
541 #define SWF10_PIPEA_EFP2 (1<<6)
542 #define SWF10_PIPEA_TV2 (1<<5)
543 #define SWF10_PIPEA_CRT2 (1<<4)
544 #define SWF10_PIPEA_LFP (1<<3)
545 #define SWF10_PIPEA_EFP (1<<2)
546 #define SWF10_PIPEA_TV (1<<1)
547 #define SWF10_PIPEA_CRT (1<<0)
549 #define SWF11_MEMORY_SIZE_SHIFT 16
550 #define SWF11_SV_TEST_EN (1<<15)
551 #define SWF11_IS_AGP (1<<14)
552 #define SWF11_DISPLAY_HOLDOFF (1<<13)
553 #define SWF11_DPMS_REDUCED (1<<12)
554 #define SWF11_IS_VBE_MODE (1<<11)
555 #define SWF11_PIPEB_ACCESS (1<<10) /* 0 here means pipe a */
556 #define SWF11_DPMS_MASK 0x07
557 #define SWF11_DPMS_OFF (1<<2)
558 #define SWF11_DPMS_SUSPEND (1<<1)
559 #define SWF11_DPMS_STANDBY (1<<0)
560 #define SWF11_DPMS_ON 0
562 #define SWF14_GFX_PFIT_EN (1<<31)
563 #define SWF14_TEXT_PFIT_EN (1<<30)
564 #define SWF14_LID_STATUS_CLOSED (1<<29) /* 0 here means open */
565 #define SWF14_POPUP_EN (1<<28)
566 #define SWF14_DISPLAY_HOLDOFF (1<<27)
567 #define SWF14_DISP_DETECT_EN (1<<26)
568 #define SWF14_DOCKING_STATUS_DOCKED (1<<25) /* 0 here means undocked */
569 #define SWF14_DRIVER_STATUS (1<<24)
570 #define SWF14_OS_TYPE_WIN9X (1<<23)
571 #define SWF14_OS_TYPE_WINNT (1<<22)
573 #define SWF14_PM_TYPE_MASK 0x00070000
574 #define SWF14_PM_ACPI_VIDEO (0x4 << 16)
575 #define SWF14_PM_ACPI (0x3 << 16)
576 #define SWF14_PM_APM_12 (0x2 << 16)
577 #define SWF14_PM_APM_11 (0x1 << 16)
578 #define SWF14_HK_REQUEST_MASK 0x0000ffff /* see GR18 6:3 for event type */
579 /* if GR18 indicates a display switch */
580 #define SWF14_DS_PIPEB_LFP2_EN (1<<15)
581 #define SWF14_DS_PIPEB_EFP2_EN (1<<14)
582 #define SWF14_DS_PIPEB_TV2_EN (1<<13)
583 #define SWF14_DS_PIPEB_CRT2_EN (1<<12)
584 #define SWF14_DS_PIPEB_LFP_EN (1<<11)
585 #define SWF14_DS_PIPEB_EFP_EN (1<<10)
586 #define SWF14_DS_PIPEB_TV_EN (1<<9)
587 #define SWF14_DS_PIPEB_CRT_EN (1<<8)
588 #define SWF14_DS_PIPEA_LFP2_EN (1<<7)
589 #define SWF14_DS_PIPEA_EFP2_EN (1<<6)
590 #define SWF14_DS_PIPEA_TV2_EN (1<<5)
591 #define SWF14_DS_PIPEA_CRT2_EN (1<<4)
592 #define SWF14_DS_PIPEA_LFP_EN (1<<3)
593 #define SWF14_DS_PIPEA_EFP_EN (1<<2)
594 #define SWF14_DS_PIPEA_TV_EN (1<<1)
595 #define SWF14_DS_PIPEA_CRT_EN (1<<0)
596 /* if GR18 indicates a panel fitting request */
597 #define SWF14_PFIT_EN (1<<0) /* 0 means disable */
598 /* if GR18 indicates an APM change request */
599 #define SWF14_APM_HIBERNATE 0x4
600 #define SWF14_APM_SUSPEND 0x3
601 #define SWF14_APM_STANDBY 0x1
602 #define SWF14_APM_RESTORE 0x0
604 /* Add the device class for LFP, TV, HDMI */
605 #define DEVICE_TYPE_INT_LFP 0x1022
606 #define DEVICE_TYPE_INT_TV 0x1009
607 #define DEVICE_TYPE_HDMI 0x60D2
608 #define DEVICE_TYPE_DP 0x68C6
609 #define DEVICE_TYPE_eDP 0x78C6
611 /* define the DVO port for HDMI output type */
616 /* define the PORT for DP output type */
621 #endif /* _INTEL_BIOS_H_ */