drivers/gpu/drm/gma500/psb_intel_display.c

   1 /*
   2  * Copyright Â© 2006-2011 Intel Corporation
   3  *
   4  * This program is free software; you can redistribute it and/or modify it
   5  * under the terms and conditions of the GNU General Public License,
   6  * version 2, as published by the Free Software Foundation.
   7  *
   8  * This program is distributed in the hope it will be useful, but WITHOUT
   9  * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
  10  * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
  11  * more details.
  12  *
  13  * You should have received a copy of the GNU General Public License along with
  14  * this program; if not, write to the Free Software Foundation, Inc.,
  15  * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
  16  *
  17  * Authors:
  18  *      Eric Anholt <eric@anholt.net>
  19  */
  20
  21 #include <linux/i2c.h>
  22
  23 #include <drm/drmP.h>
  24 #include "framebuffer.h"
  25 #include "psb_drv.h"
  26 #include "psb_intel_drv.h"
  27 #include "psb_intel_reg.h"
  28 #include "gma_display.h"
  29 #include "power.h"
  30
  31 #define INTEL_LIMIT_I9XX_SDVO_DAC   0
  32 #define INTEL_LIMIT_I9XX_LVDS       1
  33
  34 static const struct gma_limit_t psb_intel_limits[] = {
  35         {                       /* INTEL_LIMIT_I9XX_SDVO_DAC */
  36          .dot = {.min = 20000, .max = 400000},
  37          .vco = {.min = 1400000, .max = 2800000},
  38          .n = {.min = 1, .max = 6},
  39          .m = {.min = 70, .max = 120},
  40          .m1 = {.min = 8, .max = 18},
  41          .m2 = {.min = 3, .max = 7},
  42          .p = {.min = 5, .max = 80},
  43          .p1 = {.min = 1, .max = 8},
  44          .p2 = {.dot_limit = 200000, .p2_slow = 10, .p2_fast = 5},
  45          .find_pll = gma_find_best_pll,
  46          },
  47         {                       /* INTEL_LIMIT_I9XX_LVDS */
  48          .dot = {.min = 20000, .max = 400000},
  49          .vco = {.min = 1400000, .max = 2800000},
  50          .n = {.min = 1, .max = 6},
  51          .m = {.min = 70, .max = 120},
  52          .m1 = {.min = 8, .max = 18},
  53          .m2 = {.min = 3, .max = 7},
  54          .p = {.min = 7, .max = 98},
  55          .p1 = {.min = 1, .max = 8},
  56          /* The single-channel range is 25-112Mhz, and dual-channel
  57           * is 80-224Mhz.  Prefer single channel as much as possible.
  58           */
  59          .p2 = {.dot_limit = 112000, .p2_slow = 14, .p2_fast = 7},
  60          .find_pll = gma_find_best_pll,
  61          },
  62 };
  63
  64 static const struct gma_limit_t *psb_intel_limit(struct drm_crtc *crtc,
  65                                                  int refclk)
  66 {
  67         const struct gma_limit_t *limit;
  68
  69         if (gma_pipe_has_type(crtc, INTEL_OUTPUT_LVDS))
  70                 limit = &psb_intel_limits[INTEL_LIMIT_I9XX_LVDS];
  71         else
  72                 limit = &psb_intel_limits[INTEL_LIMIT_I9XX_SDVO_DAC];
  73         return limit;
  74 }
  75
  76 static void psb_intel_clock(int refclk, struct gma_clock_t *clock)
  77 {
  78         clock->m = 5 * (clock->m1 + 2) + (clock->m2 + 2);
  79         clock->p = clock->p1 * clock->p2;
  80         clock->vco = refclk * clock->m / (clock->n + 2);
  81         clock->dot = clock->vco / clock->p;
  82 }
  83
  84 /**
  85  * Return the pipe currently connected to the panel fitter,
  86  * or -1 if the panel fitter is not present or not in use
  87  */
  88 static int psb_intel_panel_fitter_pipe(struct drm_device *dev)
  89 {
  90         u32 pfit_control;
  91
  92         pfit_control = REG_READ(PFIT_CONTROL);
  93
  94         /* See if the panel fitter is in use */
  95         if ((pfit_control & PFIT_ENABLE) == 0)
  96                 return -1;
  97         /* Must be on PIPE 1 for PSB */
  98         return 1;
  99 }
 100
 101 static int psb_intel_crtc_mode_set(struct drm_crtc *crtc,
 102                                struct drm_display_mode *mode,
 103                                struct drm_display_mode *adjusted_mode,
 104                                int x, int y,
 105                                struct drm_framebuffer *old_fb)
 106 {
 107         struct drm_device *dev = crtc->dev;
 108         struct drm_psb_private *dev_priv = dev->dev_private;
 109         struct gma_crtc *gma_crtc = to_gma_crtc(crtc);
 110         struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private;
 111         int pipe = gma_crtc->pipe;
 112         const struct psb_offset *map = &dev_priv->regmap[pipe];
 113         int refclk;
 114         struct gma_clock_t clock;
 115         u32 dpll = 0, fp = 0, dspcntr, pipeconf;
 116         bool ok, is_sdvo = false;
 117         bool is_lvds = false, is_tv = false;
 118         struct drm_mode_config *mode_config = &dev->mode_config;
 119         struct drm_connector *connector;
 120         const struct gma_limit_t *limit;
 121
 122         /* No scan out no play */
 123         if (crtc->fb == NULL) {
 124                 crtc_funcs->mode_set_base(crtc, x, y, old_fb);
 125                 return 0;
 126         }
 127
 128         list_for_each_entry(connector, &mode_config->connector_list, head) {
 129                 struct gma_encoder *gma_encoder = gma_attached_encoder(connector);
 130
 131                 if (!connector->encoder
 132                     || connector->encoder->crtc != crtc)
 133                         continue;
 134
 135                 switch (gma_encoder->type) {
 136                 case INTEL_OUTPUT_LVDS:
 137                         is_lvds = true;
 138                         break;
 139                 case INTEL_OUTPUT_SDVO:
 140                         is_sdvo = true;
 141                         break;
 142                 case INTEL_OUTPUT_TVOUT:
 143                         is_tv = true;
 144                         break;
 145                 }
 146         }
 147
 148         refclk = 96000;
 149
 150         limit = gma_crtc->clock_funcs->limit(crtc, refclk);
 151
 152         ok = limit->find_pll(limit, crtc, adjusted_mode->clock, refclk,
 153                                  &clock);
 154         if (!ok) {
 155                 DRM_ERROR("Couldn't find PLL settings for mode! target: %d, actual: %d",
 156                           adjusted_mode->clock, clock.dot);
 157                 return 0;
 158         }
 159
 160         fp = clock.n << 16 | clock.m1 << 8 | clock.m2;
 161
 162         dpll = DPLL_VGA_MODE_DIS;
 163         if (is_lvds) {
 164                 dpll |= DPLLB_MODE_LVDS;
 165                 dpll |= DPLL_DVO_HIGH_SPEED;
 166         } else
 167                 dpll |= DPLLB_MODE_DAC_SERIAL;
 168         if (is_sdvo) {
 169                 int sdvo_pixel_multiply =
 170                             adjusted_mode->clock / mode->clock;
 171                 dpll |= DPLL_DVO_HIGH_SPEED;
 172                 dpll |=
 173                     (sdvo_pixel_multiply - 1) << SDVO_MULTIPLIER_SHIFT_HIRES;
 174         }
 175
 176         /* compute bitmask from p1 value */
 177         dpll |= (1 << (clock.p1 - 1)) << 16;
 178         switch (clock.p2) {
 179         case 5:
 180                 dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_5;
 181                 break;
 182         case 7:
 183                 dpll |= DPLLB_LVDS_P2_CLOCK_DIV_7;
 184                 break;
 185         case 10:
 186                 dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_10;
 187                 break;
 188         case 14:
 189                 dpll |= DPLLB_LVDS_P2_CLOCK_DIV_14;
 190                 break;
 191         }
 192
 193         if (is_tv) {
 194                 /* XXX: just matching BIOS for now */
 195 /*      dpll |= PLL_REF_INPUT_TVCLKINBC; */
 196                 dpll |= 3;
 197         }
 198         dpll |= PLL_REF_INPUT_DREFCLK;
 199
 200         /* setup pipeconf */
 201         pipeconf = REG_READ(map->conf);
 202
 203         /* Set up the display plane register */
 204         dspcntr = DISPPLANE_GAMMA_ENABLE;
 205
 206         if (pipe == 0)
 207                 dspcntr |= DISPPLANE_SEL_PIPE_A;
 208         else
 209                 dspcntr |= DISPPLANE_SEL_PIPE_B;
 210
 211         dspcntr |= DISPLAY_PLANE_ENABLE;
 212         pipeconf |= PIPEACONF_ENABLE;
 213         dpll |= DPLL_VCO_ENABLE;
 214
 215
 216         /* Disable the panel fitter if it was on our pipe */
 217         if (psb_intel_panel_fitter_pipe(dev) == pipe)
 218                 REG_WRITE(PFIT_CONTROL, 0);
 219
 220         drm_mode_debug_printmodeline(mode);
 221
 222         if (dpll & DPLL_VCO_ENABLE) {
 223                 REG_WRITE(map->fp0, fp);
 224                 REG_WRITE(map->dpll, dpll & ~DPLL_VCO_ENABLE);
 225                 REG_READ(map->dpll);
 226                 udelay(150);
 227         }
 228
 229         /* The LVDS pin pair needs to be on before the DPLLs are enabled.
 230          * This is an exception to the general rule that mode_set doesn't turn
 231          * things on.
 232          */
 233         if (is_lvds) {
 234                 u32 lvds = REG_READ(LVDS);
 235
 236                 lvds &= ~LVDS_PIPEB_SELECT;
 237                 if (pipe == 1)
 238                         lvds |= LVDS_PIPEB_SELECT;
 239
 240                 lvds |= LVDS_PORT_EN | LVDS_A0A2_CLKA_POWER_UP;
 241                 /* Set the B0-B3 data pairs corresponding to
 242                  * whether we're going to
 243                  * set the DPLLs for dual-channel mode or not.
 244                  */
 245                 lvds &= ~(LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP);
 246                 if (clock.p2 == 7)
 247                         lvds |= LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP;
 248
 249                 /* It would be nice to set 24 vs 18-bit mode (LVDS_A3_POWER_UP)
 250                  * appropriately here, but we need to look more
 251                  * thoroughly into how panels behave in the two modes.
 252                  */
 253
 254                 REG_WRITE(LVDS, lvds);
 255                 REG_READ(LVDS);
 256         }
 257
 258         REG_WRITE(map->fp0, fp);
 259         REG_WRITE(map->dpll, dpll);
 260         REG_READ(map->dpll);
 261         /* Wait for the clocks to stabilize. */
 262         udelay(150);
 263
 264         /* write it again -- the BIOS does, after all */
 265         REG_WRITE(map->dpll, dpll);
 266
 267         REG_READ(map->dpll);
 268         /* Wait for the clocks to stabilize. */
 269         udelay(150);
 270
 271         REG_WRITE(map->htotal, (adjusted_mode->crtc_hdisplay - 1) |
 272                   ((adjusted_mode->crtc_htotal - 1) << 16));
 273         REG_WRITE(map->hblank, (adjusted_mode->crtc_hblank_start - 1) |
 274                   ((adjusted_mode->crtc_hblank_end - 1) << 16));
 275         REG_WRITE(map->hsync, (adjusted_mode->crtc_hsync_start - 1) |
 276                   ((adjusted_mode->crtc_hsync_end - 1) << 16));
 277         REG_WRITE(map->vtotal, (adjusted_mode->crtc_vdisplay - 1) |
 278                   ((adjusted_mode->crtc_vtotal - 1) << 16));
 279         REG_WRITE(map->vblank, (adjusted_mode->crtc_vblank_start - 1) |
 280                   ((adjusted_mode->crtc_vblank_end - 1) << 16));
 281         REG_WRITE(map->vsync, (adjusted_mode->crtc_vsync_start - 1) |
 282                   ((adjusted_mode->crtc_vsync_end - 1) << 16));
 283         /* pipesrc and dspsize control the size that is scaled from,
 284          * which should always be the user's requested size.
 285          */
 286         REG_WRITE(map->size,
 287                   ((mode->vdisplay - 1) << 16) | (mode->hdisplay - 1));
 288         REG_WRITE(map->pos, 0);
 289         REG_WRITE(map->src,
 290                   ((mode->hdisplay - 1) << 16) | (mode->vdisplay - 1));
 291         REG_WRITE(map->conf, pipeconf);
 292         REG_READ(map->conf);
 293
 294         gma_wait_for_vblank(dev);
 295
 296         REG_WRITE(map->cntr, dspcntr);
 297
 298         /* Flush the plane changes */
 299         crtc_funcs->mode_set_base(crtc, x, y, old_fb);
 300
 301         gma_wait_for_vblank(dev);
 302
 303         return 0;
 304 }
 305
 306 /* Returns the clock of the currently programmed mode of the given pipe. */
 307 static int psb_intel_crtc_clock_get(struct drm_device *dev,
 308                                 struct drm_crtc *crtc)
 309 {
 310         struct gma_crtc *gma_crtc = to_gma_crtc(crtc);
 311         struct drm_psb_private *dev_priv = dev->dev_private;
 312         int pipe = gma_crtc->pipe;
 313         const struct psb_offset *map = &dev_priv->regmap[pipe];
 314         u32 dpll;
 315         u32 fp;
 316         struct gma_clock_t clock;
 317         bool is_lvds;
 318         struct psb_pipe *p = &dev_priv->regs.pipe[pipe];
 319
 320         if (gma_power_begin(dev, false)) {
 321                 dpll = REG_READ(map->dpll);
 322                 if ((dpll & DISPLAY_RATE_SELECT_FPA1) == 0)
 323                         fp = REG_READ(map->fp0);
 324                 else
 325                         fp = REG_READ(map->fp1);
 326                 is_lvds = (pipe == 1) && (REG_READ(LVDS) & LVDS_PORT_EN);
 327                 gma_power_end(dev);
 328         } else {
 329                 dpll = p->dpll;
 330
 331                 if ((dpll & DISPLAY_RATE_SELECT_FPA1) == 0)
 332                         fp = p->fp0;
 333                 else
 334                         fp = p->fp1;
 335
 336                 is_lvds = (pipe == 1) && (dev_priv->regs.psb.saveLVDS &
 337                                                                 LVDS_PORT_EN);
 338         }
 339
 340         clock.m1 = (fp & FP_M1_DIV_MASK) >> FP_M1_DIV_SHIFT;
 341         clock.m2 = (fp & FP_M2_DIV_MASK) >> FP_M2_DIV_SHIFT;
 342         clock.n = (fp & FP_N_DIV_MASK) >> FP_N_DIV_SHIFT;
 343
 344         if (is_lvds) {
 345                 clock.p1 =
 346                     ffs((dpll &
 347                          DPLL_FPA01_P1_POST_DIV_MASK_I830_LVDS) >>
 348                         DPLL_FPA01_P1_POST_DIV_SHIFT);
 349                 clock.p2 = 14;
 350
 351                 if ((dpll & PLL_REF_INPUT_MASK) ==
 352                     PLLB_REF_INPUT_SPREADSPECTRUMIN) {
 353                         /* XXX: might not be 66MHz */
 354                         psb_intel_clock(66000, &clock);
 355                 } else
 356                         psb_intel_clock(48000, &clock);
 357         } else {
 358                 if (dpll & PLL_P1_DIVIDE_BY_TWO)
 359                         clock.p1 = 2;
 360                 else {
 361                         clock.p1 =
 362                             ((dpll &
 363                               DPLL_FPA01_P1_POST_DIV_MASK_I830) >>
 364                              DPLL_FPA01_P1_POST_DIV_SHIFT) + 2;
 365                 }
 366                 if (dpll & PLL_P2_DIVIDE_BY_4)
 367                         clock.p2 = 4;
 368                 else
 369                         clock.p2 = 2;
 370
 371                 psb_intel_clock(48000, &clock);
 372         }
 373
 374         /* XXX: It would be nice to validate the clocks, but we can't reuse
 375          * i830PllIsValid() because it relies on the xf86_config connector
 376          * configuration being accurate, which it isn't necessarily.
 377          */
 378
 379         return clock.dot;
 380 }
 381
 382 /** Returns the currently programmed mode of the given pipe. */
 383 struct drm_display_mode *psb_intel_crtc_mode_get(struct drm_device *dev,
 384                                              struct drm_crtc *crtc)
 385 {
 386         struct gma_crtc *gma_crtc = to_gma_crtc(crtc);
 387         int pipe = gma_crtc->pipe;
 388         struct drm_display_mode *mode;
 389         int htot;
 390         int hsync;
 391         int vtot;
 392         int vsync;
 393         struct drm_psb_private *dev_priv = dev->dev_private;
 394         struct psb_pipe *p = &dev_priv->regs.pipe[pipe];
 395         const struct psb_offset *map = &dev_priv->regmap[pipe];
 396
 397         if (gma_power_begin(dev, false)) {
 398                 htot = REG_READ(map->htotal);
 399                 hsync = REG_READ(map->hsync);
 400                 vtot = REG_READ(map->vtotal);
 401                 vsync = REG_READ(map->vsync);
 402                 gma_power_end(dev);
 403         } else {
 404                 htot = p->htotal;
 405                 hsync = p->hsync;
 406                 vtot = p->vtotal;
 407                 vsync = p->vsync;
 408         }
 409
 410         mode = kzalloc(sizeof(*mode), GFP_KERNEL);
 411         if (!mode)
 412                 return NULL;
 413
 414         mode->clock = psb_intel_crtc_clock_get(dev, crtc);
 415         mode->hdisplay = (htot & 0xffff) + 1;
 416         mode->htotal = ((htot & 0xffff0000) >> 16) + 1;
 417         mode->hsync_start = (hsync & 0xffff) + 1;
 418         mode->hsync_end = ((hsync & 0xffff0000) >> 16) + 1;
 419         mode->vdisplay = (vtot & 0xffff) + 1;
 420         mode->vtotal = ((vtot & 0xffff0000) >> 16) + 1;
 421         mode->vsync_start = (vsync & 0xffff) + 1;
 422         mode->vsync_end = ((vsync & 0xffff0000) >> 16) + 1;
 423
 424         drm_mode_set_name(mode);
 425         drm_mode_set_crtcinfo(mode, 0);
 426
 427         return mode;
 428 }
 429
 430 const struct drm_crtc_helper_funcs psb_intel_helper_funcs = {
 431         .dpms = gma_crtc_dpms,
 432         .mode_fixup = gma_crtc_mode_fixup,
 433         .mode_set = psb_intel_crtc_mode_set,
 434         .mode_set_base = gma_pipe_set_base,
 435         .prepare = gma_crtc_prepare,
 436         .commit = gma_crtc_commit,
 437         .disable = gma_crtc_disable,
 438 };
 439
 440 const struct drm_crtc_funcs psb_intel_crtc_funcs = {
 441         .save = gma_crtc_save,
 442         .restore = gma_crtc_restore,
 443         .cursor_set = gma_crtc_cursor_set,
 444         .cursor_move = gma_crtc_cursor_move,
 445         .gamma_set = gma_crtc_gamma_set,
 446         .set_config = gma_crtc_set_config,
 447         .destroy = gma_crtc_destroy,
 448 };
 449
 450 const struct gma_clock_funcs psb_clock_funcs = {
 451         .clock = psb_intel_clock,
 452         .limit = psb_intel_limit,
 453         .pll_is_valid = gma_pll_is_valid,
 454 };
 455
 456 /*
 457  * Set the default value of cursor control and base register
 458  * to zero. This is a workaround for h/w defect on Oaktrail
 459  */
 460 static void psb_intel_cursor_init(struct drm_device *dev,
 461                                   struct gma_crtc *gma_crtc)
 462 {
 463         struct drm_psb_private *dev_priv = dev->dev_private;
 464         u32 control[3] = { CURACNTR, CURBCNTR, CURCCNTR };
 465         u32 base[3] = { CURABASE, CURBBASE, CURCBASE };
 466         struct gtt_range *cursor_gt;
 467
 468         if (dev_priv->ops->cursor_needs_phys) {
 469                 /* Allocate 4 pages of stolen mem for a hardware cursor. That
 470                  * is enough for the 64 x 64 ARGB cursors we support.
 471                  */
 472                 cursor_gt = psb_gtt_alloc_range(dev, 4 * PAGE_SIZE, "cursor", 1);
 473                 if (!cursor_gt) {
 474                         gma_crtc->cursor_gt = NULL;
 475                         goto out;
 476                 }
 477                 gma_crtc->cursor_gt = cursor_gt;
 478                 gma_crtc->cursor_addr = dev_priv->stolen_base +
 479                                                         cursor_gt->offset;
 480         } else {
 481                 gma_crtc->cursor_gt = NULL;
 482         }
 483
 484 out:
 485         REG_WRITE(control[gma_crtc->pipe], 0);
 486         REG_WRITE(base[gma_crtc->pipe], 0);
 487 }
 488
 489 void psb_intel_crtc_init(struct drm_device *dev, int pipe,
 490                      struct psb_intel_mode_device *mode_dev)
 491 {
 492         struct drm_psb_private *dev_priv = dev->dev_private;
 493         struct gma_crtc *gma_crtc;
 494         int i;
 495         uint16_t *r_base, *g_base, *b_base;
 496
 497         /* We allocate a extra array of drm_connector pointers
 498          * for fbdev after the crtc */
 499         gma_crtc = kzalloc(sizeof(struct gma_crtc) +
 500                         (INTELFB_CONN_LIMIT * sizeof(struct drm_connector *)),
 501                         GFP_KERNEL);
 502         if (gma_crtc == NULL)
 503                 return;
 504
 505         gma_crtc->crtc_state =
 506                 kzalloc(sizeof(struct psb_intel_crtc_state), GFP_KERNEL);
 507         if (!gma_crtc->crtc_state) {
 508                 dev_err(dev->dev, "Crtc state error: No memory\n");
 509                 kfree(gma_crtc);
 510                 return;
 511         }
 512
 513         /* Set the CRTC operations from the chip specific data */
 514         drm_crtc_init(dev, &gma_crtc->base, dev_priv->ops->crtc_funcs);
 515
 516         /* Set the CRTC clock functions from chip specific data */
 517         gma_crtc->clock_funcs = dev_priv->ops->clock_funcs;
 518
 519         drm_mode_crtc_set_gamma_size(&gma_crtc->base, 256);
 520         gma_crtc->pipe = pipe;
 521         gma_crtc->plane = pipe;
 522
 523         r_base = gma_crtc->base.gamma_store;
 524         g_base = r_base + 256;
 525         b_base = g_base + 256;
 526         for (i = 0; i < 256; i++) {
 527                 gma_crtc->lut_r[i] = i;
 528                 gma_crtc->lut_g[i] = i;
 529                 gma_crtc->lut_b[i] = i;
 530                 r_base[i] = i << 8;
 531                 g_base[i] = i << 8;
 532                 b_base[i] = i << 8;
 533
 534                 gma_crtc->lut_adj[i] = 0;
 535         }
 536
 537         gma_crtc->mode_dev = mode_dev;
 538         gma_crtc->cursor_addr = 0;
 539
 540         drm_crtc_helper_add(&gma_crtc->base,
 541                                                 dev_priv->ops->crtc_helper);
 542
 543         /* Setup the array of drm_connector pointer array */
 544         gma_crtc->mode_set.crtc = &gma_crtc->base;
 545         BUG_ON(pipe >= ARRAY_SIZE(dev_priv->plane_to_crtc_mapping) ||
 546                dev_priv->plane_to_crtc_mapping[gma_crtc->plane] != NULL);
 547         dev_priv->plane_to_crtc_mapping[gma_crtc->plane] = &gma_crtc->base;
 548         dev_priv->pipe_to_crtc_mapping[gma_crtc->pipe] = &gma_crtc->base;
 549         gma_crtc->mode_set.connectors = (struct drm_connector **)(gma_crtc + 1);
 550         gma_crtc->mode_set.num_connectors = 0;
 551         psb_intel_cursor_init(dev, gma_crtc);
 552
 553         /* Set to true so that the pipe is forced off on initial config. */
 554         gma_crtc->active = true;
 555 }
 556
 557 int psb_intel_get_pipe_from_crtc_id(struct drm_device *dev, void *data,
 558                                 struct drm_file *file_priv)
 559 {
 560         struct drm_psb_private *dev_priv = dev->dev_private;
 561         struct drm_psb_get_pipe_from_crtc_id_arg *pipe_from_crtc_id = data;
 562         struct drm_mode_object *drmmode_obj;
 563         struct gma_crtc *crtc;
 564
 565         if (!dev_priv) {
 566                 dev_err(dev->dev, "called with no initialization\n");
 567                 return -EINVAL;
 568         }
 569
 570         drmmode_obj = drm_mode_object_find(dev, pipe_from_crtc_id->crtc_id,
 571                         DRM_MODE_OBJECT_CRTC);
 572
 573         if (!drmmode_obj) {
 574                 dev_err(dev->dev, "no such CRTC id\n");
 575                 return -EINVAL;
 576         }
 577
 578         crtc = to_gma_crtc(obj_to_crtc(drmmode_obj));
 579         pipe_from_crtc_id->pipe = crtc->pipe;
 580
 581         return 0;
 582 }
 583
 584 struct drm_crtc *psb_intel_get_crtc_from_pipe(struct drm_device *dev, int pipe)
 585 {
 586         struct drm_crtc *crtc = NULL;
 587
 588         list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
 589                 struct gma_crtc *gma_crtc = to_gma_crtc(crtc);
 590                 if (gma_crtc->pipe == pipe)
 591                         break;
 592         }
 593         return crtc;
 594 }
 595
 596 int gma_connector_clones(struct drm_device *dev, int type_mask)
 597 {
 598         int index_mask = 0;
 599         struct drm_connector *connector;
 600         int entry = 0;
 601
 602         list_for_each_entry(connector, &dev->mode_config.connector_list,
 603                             head) {
 604                 struct gma_encoder *gma_encoder = gma_attached_encoder(connector);
 605                 if (type_mask & (1 << gma_encoder->type))
 606                         index_mask |= (1 << entry);
 607                 entry++;
 608         }
 609         return index_mask;
 610 }