x86/xen: resume timer irqs early
[linux/fpc-iii.git] / drivers / gpu / drm / tilcdc / tilcdc_drv.h
blob093803683b25241dc86ff9124fed081b7b54fd81
1 /*
2 * Copyright (C) 2012 Texas Instruments
3 * Author: Rob Clark <robdclark@gmail.com>
5 * This program is free software; you can redistribute it and/or modify it
6 * under the terms of the GNU General Public License version 2 as published by
7 * the Free Software Foundation.
9 * This program is distributed in the hope that it will be useful, but WITHOUT
10 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
11 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
12 * more details.
14 * You should have received a copy of the GNU General Public License along with
15 * this program. If not, see <http://www.gnu.org/licenses/>.
18 #ifndef __TILCDC_DRV_H__
19 #define __TILCDC_DRV_H__
21 #include <linux/clk.h>
22 #include <linux/cpufreq.h>
23 #include <linux/module.h>
24 #include <linux/platform_device.h>
25 #include <linux/pm.h>
26 #include <linux/pm_runtime.h>
27 #include <linux/slab.h>
28 #include <linux/of.h>
29 #include <linux/of_device.h>
30 #include <linux/list.h>
32 #include <drm/drmP.h>
33 #include <drm/drm_crtc_helper.h>
34 #include <drm/drm_gem_cma_helper.h>
35 #include <drm/drm_fb_cma_helper.h>
37 /* Defaulting to pixel clock defined on AM335x */
38 #define TILCDC_DEFAULT_MAX_PIXELCLOCK 126000
39 /* Defaulting to max width as defined on AM335x */
40 #define TILCDC_DEFAULT_MAX_WIDTH 2048
42 * This may need some tweaking, but want to allow at least 1280x1024@60
43 * with optimized DDR & EMIF settings tweaked 1920x1080@24 appears to
44 * be supportable
46 #define TILCDC_DEFAULT_MAX_BANDWIDTH (1280*1024*60)
49 struct tilcdc_drm_private {
50 void __iomem *mmio;
52 struct clk *disp_clk; /* display dpll */
53 struct clk *clk; /* functional clock */
54 int rev; /* IP revision */
56 /* don't attempt resolutions w/ higher W * H * Hz: */
57 uint32_t max_bandwidth;
59 * Pixel Clock will be restricted to some value as
60 * defined in the device datasheet measured in KHz
62 uint32_t max_pixelclock;
64 * Max allowable width is limited on a per device basis
65 * measured in pixels
67 uint32_t max_width;
69 /* register contents saved across suspend/resume: */
70 u32 saved_register[12];
72 #ifdef CONFIG_CPU_FREQ
73 struct notifier_block freq_transition;
74 unsigned int lcd_fck_rate;
75 #endif
77 struct workqueue_struct *wq;
79 struct drm_fbdev_cma *fbdev;
81 struct drm_crtc *crtc;
83 unsigned int num_encoders;
84 struct drm_encoder *encoders[8];
86 unsigned int num_connectors;
87 struct drm_connector *connectors[8];
90 /* Sub-module for display. Since we don't know at compile time what panels
91 * or display adapter(s) might be present (for ex, off chip dvi/tfp410,
92 * hdmi encoder, various lcd panels), the connector/encoder(s) are split into
93 * separate drivers. If they are probed and found to be present, they
94 * register themselves with tilcdc_register_module().
96 struct tilcdc_module;
98 struct tilcdc_module_ops {
99 /* create appropriate encoders/connectors: */
100 int (*modeset_init)(struct tilcdc_module *mod, struct drm_device *dev);
101 void (*destroy)(struct tilcdc_module *mod);
102 #ifdef CONFIG_DEBUG_FS
103 /* create debugfs nodes (can be NULL): */
104 int (*debugfs_init)(struct tilcdc_module *mod, struct drm_minor *minor);
105 /* cleanup debugfs nodes (can be NULL): */
106 void (*debugfs_cleanup)(struct tilcdc_module *mod, struct drm_minor *minor);
107 #endif
110 struct tilcdc_module {
111 const char *name;
112 struct list_head list;
113 const struct tilcdc_module_ops *funcs;
114 unsigned int preferred_bpp;
117 void tilcdc_module_init(struct tilcdc_module *mod, const char *name,
118 const struct tilcdc_module_ops *funcs);
119 void tilcdc_module_cleanup(struct tilcdc_module *mod);
120 void tilcdc_slave_probedefer(bool defered);
122 /* Panel config that needs to be set in the crtc, but is not coming from
123 * the mode timings. The display module is expected to call
124 * tilcdc_crtc_set_panel_info() to set this during modeset.
126 struct tilcdc_panel_info {
128 /* AC Bias Pin Frequency */
129 uint32_t ac_bias;
131 /* AC Bias Pin Transitions per Interrupt */
132 uint32_t ac_bias_intrpt;
134 /* DMA burst size */
135 uint32_t dma_burst_sz;
137 /* Bits per pixel */
138 uint32_t bpp;
140 /* FIFO DMA Request Delay */
141 uint32_t fdd;
143 /* TFT Alternative Signal Mapping (Only for active) */
144 bool tft_alt_mode;
146 /* Invert pixel clock */
147 bool invert_pxl_clk;
149 /* Horizontal and Vertical Sync Edge: 0=rising 1=falling */
150 uint32_t sync_edge;
152 /* Horizontal and Vertical Sync: Control: 0=ignore */
153 uint32_t sync_ctrl;
155 /* Raster Data Order Select: 1=Most-to-least 0=Least-to-most */
156 uint32_t raster_order;
158 /* DMA FIFO threshold */
159 uint32_t fifo_th;
162 #define DBG(fmt, ...) DRM_DEBUG(fmt"\n", ##__VA_ARGS__)
164 struct drm_crtc *tilcdc_crtc_create(struct drm_device *dev);
165 void tilcdc_crtc_cancel_page_flip(struct drm_crtc *crtc, struct drm_file *file);
166 irqreturn_t tilcdc_crtc_irq(struct drm_crtc *crtc);
167 void tilcdc_crtc_update_clk(struct drm_crtc *crtc);
168 void tilcdc_crtc_set_panel_info(struct drm_crtc *crtc,
169 const struct tilcdc_panel_info *info);
170 int tilcdc_crtc_mode_valid(struct drm_crtc *crtc, struct drm_display_mode *mode);
171 int tilcdc_crtc_max_width(struct drm_crtc *crtc);
173 #endif /* __TILCDC_DRV_H__ */