x86/xen: resume timer irqs early
[linux/fpc-iii.git] / drivers / scsi / lpfc / lpfc_disc.h
blobe409ba5f728c2f31c21cc8eaefe0754ae75f0efc
1 /*******************************************************************
2 * This file is part of the Emulex Linux Device Driver for *
3 * Fibre Channel Host Bus Adapters. *
4 * Copyright (C) 2004-2013 Emulex. All rights reserved. *
5 * EMULEX and SLI are trademarks of Emulex. *
6 * www.emulex.com *
7 * *
8 * This program is free software; you can redistribute it and/or *
9 * modify it under the terms of version 2 of the GNU General *
10 * Public License as published by the Free Software Foundation. *
11 * This program is distributed in the hope that it will be useful. *
12 * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND *
13 * WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, *
14 * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ARE *
15 * DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD *
16 * TO BE LEGALLY INVALID. See the GNU General Public License for *
17 * more details, a copy of which can be found in the file COPYING *
18 * included with this package. *
19 *******************************************************************/
21 #define FC_MAX_HOLD_RSCN 32 /* max number of deferred RSCNs */
22 #define FC_MAX_NS_RSP 64512 /* max size NameServer rsp */
23 #define FC_MAXLOOP 126 /* max devices supported on a fc loop */
24 #define LPFC_DISC_FLOGI_TMO 10 /* Discovery FLOGI ratov */
27 /* This is the protocol dependent definition for a Node List Entry.
28 * This is used by Fibre Channel protocol to support FCP.
31 /* worker thread events */
32 enum lpfc_work_type {
33 LPFC_EVT_ONLINE,
34 LPFC_EVT_OFFLINE_PREP,
35 LPFC_EVT_OFFLINE,
36 LPFC_EVT_WARM_START,
37 LPFC_EVT_KILL,
38 LPFC_EVT_ELS_RETRY,
39 LPFC_EVT_DEV_LOSS,
40 LPFC_EVT_FASTPATH_MGMT_EVT,
41 LPFC_EVT_RESET_HBA,
44 /* structure used to queue event to the discovery tasklet */
45 struct lpfc_work_evt {
46 struct list_head evt_listp;
47 void *evt_arg1;
48 void *evt_arg2;
49 enum lpfc_work_type evt;
52 struct lpfc_scsi_check_condition_event;
53 struct lpfc_scsi_varqueuedepth_event;
54 struct lpfc_scsi_event_header;
55 struct lpfc_fabric_event_header;
56 struct lpfc_fcprdchkerr_event;
58 /* structure used for sending events from fast path */
59 struct lpfc_fast_path_event {
60 struct lpfc_work_evt work_evt;
61 struct lpfc_vport *vport;
62 union {
63 struct lpfc_scsi_check_condition_event check_cond_evt;
64 struct lpfc_scsi_varqueuedepth_event queue_depth_evt;
65 struct lpfc_scsi_event_header scsi_evt;
66 struct lpfc_fabric_event_header fabric_evt;
67 struct lpfc_fcprdchkerr_event read_check_error;
68 } un;
71 #define LPFC_SLI4_MAX_XRI 1024 /* Used to make the ndlp's xri_bitmap */
72 #define XRI_BITMAP_ULONGS (LPFC_SLI4_MAX_XRI / BITS_PER_LONG)
73 struct lpfc_node_rrqs {
74 unsigned long xri_bitmap[XRI_BITMAP_ULONGS];
77 struct lpfc_nodelist {
78 struct list_head nlp_listp;
79 struct lpfc_name nlp_portname;
80 struct lpfc_name nlp_nodename;
81 uint32_t nlp_flag; /* entry flags */
82 uint32_t nlp_DID; /* FC D_ID of entry */
83 uint32_t nlp_last_elscmd; /* Last ELS cmd sent */
84 uint16_t nlp_type;
85 #define NLP_FC_NODE 0x1 /* entry is an FC node */
86 #define NLP_FABRIC 0x4 /* entry rep a Fabric entity */
87 #define NLP_FCP_TARGET 0x8 /* entry is an FCP target */
88 #define NLP_FCP_INITIATOR 0x10 /* entry is an FCP Initiator */
90 uint16_t nlp_rpi;
91 uint16_t nlp_state; /* state transition indicator */
92 uint16_t nlp_prev_state; /* state transition indicator */
93 uint16_t nlp_xri; /* output exchange id for RPI */
94 uint16_t nlp_sid; /* scsi id */
95 #define NLP_NO_SID 0xffff
96 uint16_t nlp_maxframe; /* Max RCV frame size */
97 uint8_t nlp_class_sup; /* Supported Classes */
98 uint8_t nlp_retry; /* used for ELS retries */
99 uint8_t nlp_fcp_info; /* class info, bits 0-3 */
100 #define NLP_FCP_2_DEVICE 0x10 /* FCP-2 device */
102 uint16_t nlp_usg_map; /* ndlp management usage bitmap */
103 #define NLP_USG_NODE_ACT_BIT 0x1 /* Indicate ndlp is actively used */
104 #define NLP_USG_IACT_REQ_BIT 0x2 /* Request to inactivate ndlp */
105 #define NLP_USG_FREE_REQ_BIT 0x4 /* Request to invoke ndlp memory free */
106 #define NLP_USG_FREE_ACK_BIT 0x8 /* Indicate ndlp memory free invoked */
108 struct timer_list nlp_delayfunc; /* Used for delayed ELS cmds */
109 struct lpfc_hba *phba;
110 struct fc_rport *rport; /* Corresponding FC transport
111 port structure */
112 struct lpfc_vport *vport;
113 struct lpfc_work_evt els_retry_evt;
114 struct lpfc_work_evt dev_loss_evt;
115 struct kref kref;
116 atomic_t cmd_pending;
117 uint32_t cmd_qdepth;
118 unsigned long last_change_time;
119 struct lpfc_node_rrqs active_rrqs;
120 struct lpfc_scsicmd_bkt *lat_data; /* Latency data */
122 struct lpfc_node_rrq {
123 struct list_head list;
124 uint16_t xritag;
125 uint16_t send_rrq;
126 uint16_t rxid;
127 uint32_t nlp_DID; /* FC D_ID of entry */
128 struct lpfc_vport *vport;
129 struct lpfc_nodelist *ndlp;
130 unsigned long rrq_stop_time;
133 /* Defines for nlp_flag (uint32) */
134 #define NLP_IGNR_REG_CMPL 0x00000001 /* Rcvd rscn before we cmpl reg login */
135 #define NLP_REG_LOGIN_SEND 0x00000002 /* sent reglogin to adapter */
136 #define NLP_PLOGI_SND 0x00000020 /* sent PLOGI request for this entry */
137 #define NLP_PRLI_SND 0x00000040 /* sent PRLI request for this entry */
138 #define NLP_ADISC_SND 0x00000080 /* sent ADISC request for this entry */
139 #define NLP_LOGO_SND 0x00000100 /* sent LOGO request for this entry */
140 #define NLP_RNID_SND 0x00000400 /* sent RNID request for this entry */
141 #define NLP_ELS_SND_MASK 0x000007e0 /* sent ELS request for this entry */
142 #define NLP_DEFER_RM 0x00010000 /* Remove this ndlp if no longer used */
143 #define NLP_DELAY_TMO 0x00020000 /* delay timeout is running for node */
144 #define NLP_NPR_2B_DISC 0x00040000 /* node is included in num_disc_nodes */
145 #define NLP_RCV_PLOGI 0x00080000 /* Rcv'ed PLOGI from remote system */
146 #define NLP_LOGO_ACC 0x00100000 /* Process LOGO after ACC completes */
147 #define NLP_TGT_NO_SCSIID 0x00200000 /* good PRLI but no binding for scsid */
148 #define NLP_ISSUE_LOGO 0x00400000 /* waiting to issue a LOGO */
149 #define NLP_ACC_REGLOGIN 0x01000000 /* Issue Reg Login after successful
150 ACC */
151 #define NLP_NPR_ADISC 0x02000000 /* Issue ADISC when dq'ed from
152 NPR list */
153 #define NLP_RM_DFLT_RPI 0x04000000 /* need to remove leftover dflt RPI */
154 #define NLP_NODEV_REMOVE 0x08000000 /* Defer removal till discovery ends */
155 #define NLP_TARGET_REMOVE 0x10000000 /* Target remove in process */
156 #define NLP_SC_REQ 0x20000000 /* Target requires authentication */
157 #define NLP_FIRSTBURST 0x40000000 /* Target supports FirstBurst */
158 #define NLP_RPI_REGISTERED 0x80000000 /* nlp_rpi is valid */
160 /* ndlp usage management macros */
161 #define NLP_CHK_NODE_ACT(ndlp) (((ndlp)->nlp_usg_map \
162 & NLP_USG_NODE_ACT_BIT) \
163 && \
164 !((ndlp)->nlp_usg_map \
165 & NLP_USG_FREE_ACK_BIT))
166 #define NLP_SET_NODE_ACT(ndlp) ((ndlp)->nlp_usg_map \
167 |= NLP_USG_NODE_ACT_BIT)
168 #define NLP_INT_NODE_ACT(ndlp) ((ndlp)->nlp_usg_map \
169 = NLP_USG_NODE_ACT_BIT)
170 #define NLP_CLR_NODE_ACT(ndlp) ((ndlp)->nlp_usg_map \
171 &= ~NLP_USG_NODE_ACT_BIT)
172 #define NLP_CHK_IACT_REQ(ndlp) ((ndlp)->nlp_usg_map \
173 & NLP_USG_IACT_REQ_BIT)
174 #define NLP_SET_IACT_REQ(ndlp) ((ndlp)->nlp_usg_map \
175 |= NLP_USG_IACT_REQ_BIT)
176 #define NLP_CHK_FREE_REQ(ndlp) ((ndlp)->nlp_usg_map \
177 & NLP_USG_FREE_REQ_BIT)
178 #define NLP_SET_FREE_REQ(ndlp) ((ndlp)->nlp_usg_map \
179 |= NLP_USG_FREE_REQ_BIT)
180 #define NLP_CHK_FREE_ACK(ndlp) ((ndlp)->nlp_usg_map \
181 & NLP_USG_FREE_ACK_BIT)
182 #define NLP_SET_FREE_ACK(ndlp) ((ndlp)->nlp_usg_map \
183 |= NLP_USG_FREE_ACK_BIT)
185 /* There are 4 different double linked lists nodelist entries can reside on.
186 * The Port Login (PLOGI) list and Address Discovery (ADISC) list are used
187 * when Link Up discovery or Registered State Change Notification (RSCN)
188 * processing is needed. Each list holds the nodes that require a PLOGI or
189 * ADISC Extended Link Service (ELS) request. These lists keep track of the
190 * nodes affected by an RSCN, or a Link Up (Typically, all nodes are effected
191 * by Link Up) event. The unmapped_list contains all nodes that have
192 * successfully logged into at the Fibre Channel level. The
193 * mapped_list will contain all nodes that are mapped FCP targets.
195 * The bind list is a list of undiscovered (potentially non-existent) nodes
196 * that we have saved binding information on. This information is used when
197 * nodes transition from the unmapped to the mapped list.
200 /* Defines for nlp_state */
201 #define NLP_STE_UNUSED_NODE 0x0 /* node is just allocated */
202 #define NLP_STE_PLOGI_ISSUE 0x1 /* PLOGI was sent to NL_PORT */
203 #define NLP_STE_ADISC_ISSUE 0x2 /* ADISC was sent to NL_PORT */
204 #define NLP_STE_REG_LOGIN_ISSUE 0x3 /* REG_LOGIN was issued for NL_PORT */
205 #define NLP_STE_PRLI_ISSUE 0x4 /* PRLI was sent to NL_PORT */
206 #define NLP_STE_LOGO_ISSUE 0x5 /* LOGO was sent to NL_PORT */
207 #define NLP_STE_UNMAPPED_NODE 0x6 /* PRLI completed from NL_PORT */
208 #define NLP_STE_MAPPED_NODE 0x7 /* Identified as a FCP Target */
209 #define NLP_STE_NPR_NODE 0x8 /* NPort disappeared */
210 #define NLP_STE_MAX_STATE 0x9
211 #define NLP_STE_FREED_NODE 0xff /* node entry was freed to MEM_NLP */
213 /* For UNUSED_NODE state, the node has just been allocated.
214 * For PLOGI_ISSUE and REG_LOGIN_ISSUE, the node is on
215 * the PLOGI list. For REG_LOGIN_COMPL, the node is taken off the PLOGI list
216 * and put on the unmapped list. For ADISC processing, the node is taken off
217 * the ADISC list and placed on either the mapped or unmapped list (depending
218 * on its previous state). Once on the unmapped list, a PRLI is issued and the
219 * state changed to PRLI_ISSUE. When the PRLI completion occurs, the state is
220 * changed to PRLI_COMPL. If the completion indicates a mapped
221 * node, the node is taken off the unmapped list. The binding list is checked
222 * for a valid binding, or a binding is automatically assigned. If binding
223 * assignment is unsuccessful, the node is left on the unmapped list. If
224 * binding assignment is successful, the associated binding list entry (if
225 * any) is removed, and the node is placed on the mapped list.
228 * For a Link Down, all nodes on the ADISC, PLOGI, unmapped or mapped
229 * lists will receive a DEVICE_RECOVERY event. If the linkdown or devloss timers
230 * expire, all effected nodes will receive a DEVICE_RM event.
233 * For a Link Up or RSCN, all nodes will move from the mapped / unmapped lists
234 * to either the ADISC or PLOGI list. After a Nameserver query or ALPA loopmap
235 * check, additional nodes may be added (DEVICE_ADD) or removed (DEVICE_RM) to /
236 * from the PLOGI or ADISC lists. Once the PLOGI and ADISC lists are populated,
237 * we will first process the ADISC list. 32 entries are processed initially and
238 * ADISC is initited for each one. Completions / Events for each node are
239 * funnelled thru the state machine. As each node finishes ADISC processing, it
240 * starts ADISC for any nodes waiting for ADISC processing. If no nodes are
241 * waiting, and the ADISC list count is identically 0, then we are done. For
242 * Link Up discovery, since all nodes on the PLOGI list are UNREG_LOGIN'ed, we
243 * can issue a CLEAR_LA and reenable Link Events. Next we will process the PLOGI
244 * list. 32 entries are processed initially and PLOGI is initited for each one.
245 * Completions / Events for each node are funnelled thru the state machine. As
246 * each node finishes PLOGI processing, it starts PLOGI for any nodes waiting
247 * for PLOGI processing. If no nodes are waiting, and the PLOGI list count is
248 * identically 0, then we are done. We have now completed discovery / RSCN
249 * handling. Upon completion, ALL nodes should be on either the mapped or
250 * unmapped lists.
253 /* Defines for Node List Entry Events that could happen */
254 #define NLP_EVT_RCV_PLOGI 0x0 /* Rcv'd an ELS PLOGI command */
255 #define NLP_EVT_RCV_PRLI 0x1 /* Rcv'd an ELS PRLI command */
256 #define NLP_EVT_RCV_LOGO 0x2 /* Rcv'd an ELS LOGO command */
257 #define NLP_EVT_RCV_ADISC 0x3 /* Rcv'd an ELS ADISC command */
258 #define NLP_EVT_RCV_PDISC 0x4 /* Rcv'd an ELS PDISC command */
259 #define NLP_EVT_RCV_PRLO 0x5 /* Rcv'd an ELS PRLO command */
260 #define NLP_EVT_CMPL_PLOGI 0x6 /* Sent an ELS PLOGI command */
261 #define NLP_EVT_CMPL_PRLI 0x7 /* Sent an ELS PRLI command */
262 #define NLP_EVT_CMPL_LOGO 0x8 /* Sent an ELS LOGO command */
263 #define NLP_EVT_CMPL_ADISC 0x9 /* Sent an ELS ADISC command */
264 #define NLP_EVT_CMPL_REG_LOGIN 0xa /* REG_LOGIN mbox cmd completed */
265 #define NLP_EVT_DEVICE_RM 0xb /* Device not found in NS / ALPAmap */
266 #define NLP_EVT_DEVICE_RECOVERY 0xc /* Device existence unknown */
267 #define NLP_EVT_MAX_EVENT 0xd