x86/xen: resume timer irqs early
[linux/fpc-iii.git] / sound / soc / pxa / mmp-sspa.h
blobea365cb9e7846f971ebc3df05ea6a11288516159
1 /*
2 * linux/sound/soc/pxa/mmp-sspa.h
4 * Copyright (C) 2011 Marvell International Ltd.
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation; either version 2 of the License, or
9 * (at your option) any later version.
11 * This program is distributed in the hope that it will be useful,
12 * but WITHOUT ANY WARRANTY; without even the implied warranty of
13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14 * GNU General Public License for more details.
16 * You should have received a copy of the GNU General Public License
17 * along with this program; if not, write to the Free Software
18 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
21 #ifndef _MMP_SSPA_H
22 #define _MMP_SSPA_H
25 * SSPA Registers
27 #define SSPA_RXD (0x00)
28 #define SSPA_RXID (0x04)
29 #define SSPA_RXCTL (0x08)
30 #define SSPA_RXSP (0x0c)
31 #define SSPA_RXFIFO_UL (0x10)
32 #define SSPA_RXINT_MASK (0x14)
33 #define SSPA_RXC (0x18)
34 #define SSPA_RXFIFO_NOFS (0x1c)
35 #define SSPA_RXFIFO_SIZE (0x20)
37 #define SSPA_TXD (0x80)
38 #define SSPA_TXID (0x84)
39 #define SSPA_TXCTL (0x88)
40 #define SSPA_TXSP (0x8c)
41 #define SSPA_TXFIFO_LL (0x90)
42 #define SSPA_TXINT_MASK (0x94)
43 #define SSPA_TXC (0x98)
44 #define SSPA_TXFIFO_NOFS (0x9c)
45 #define SSPA_TXFIFO_SIZE (0xa0)
47 /* SSPA Control Register */
48 #define SSPA_CTL_XPH (1 << 31) /* Read Phase */
49 #define SSPA_CTL_XFIG (1 << 15) /* Transmit Zeros when FIFO Empty */
50 #define SSPA_CTL_JST (1 << 3) /* Audio Sample Justification */
51 #define SSPA_CTL_XFRLEN2_MASK (7 << 24)
52 #define SSPA_CTL_XFRLEN2(x) ((x) << 24) /* Transmit Frame Length in Phase 2 */
53 #define SSPA_CTL_XWDLEN2_MASK (7 << 21)
54 #define SSPA_CTL_XWDLEN2(x) ((x) << 21) /* Transmit Word Length in Phase 2 */
55 #define SSPA_CTL_XDATDLY(x) ((x) << 19) /* Tansmit Data Delay */
56 #define SSPA_CTL_XSSZ2_MASK (7 << 16)
57 #define SSPA_CTL_XSSZ2(x) ((x) << 16) /* Transmit Sample Audio Size */
58 #define SSPA_CTL_XFRLEN1_MASK (7 << 8)
59 #define SSPA_CTL_XFRLEN1(x) ((x) << 8) /* Transmit Frame Length in Phase 1 */
60 #define SSPA_CTL_XWDLEN1_MASK (7 << 5)
61 #define SSPA_CTL_XWDLEN1(x) ((x) << 5) /* Transmit Word Length in Phase 1 */
62 #define SSPA_CTL_XSSZ1_MASK (7 << 0)
63 #define SSPA_CTL_XSSZ1(x) ((x) << 0) /* XSSZ1 */
65 #define SSPA_CTL_8_BITS (0x0) /* Sample Size */
66 #define SSPA_CTL_12_BITS (0x1)
67 #define SSPA_CTL_16_BITS (0x2)
68 #define SSPA_CTL_20_BITS (0x3)
69 #define SSPA_CTL_24_BITS (0x4)
70 #define SSPA_CTL_32_BITS (0x5)
72 /* SSPA Serial Port Register */
73 #define SSPA_SP_WEN (1 << 31) /* Write Configuration Enable */
74 #define SSPA_SP_MSL (1 << 18) /* Master Slave Configuration */
75 #define SSPA_SP_CLKP (1 << 17) /* CLKP Polarity Clock Edge Select */
76 #define SSPA_SP_FSP (1 << 16) /* FSP Polarity Clock Edge Select */
77 #define SSPA_SP_FFLUSH (1 << 2) /* FIFO Flush */
78 #define SSPA_SP_S_RST (1 << 1) /* Active High Reset Signal */
79 #define SSPA_SP_S_EN (1 << 0) /* Serial Clock Domain Enable */
80 #define SSPA_SP_FWID(x) ((x) << 20) /* Frame-Sync Width */
81 #define SSPA_TXSP_FPER(x) ((x) << 4) /* Frame-Sync Active */
83 /* sspa clock sources */
84 #define MMP_SSPA_CLK_PLL 0
85 #define MMP_SSPA_CLK_VCXO 1
86 #define MMP_SSPA_CLK_AUDIO 3
88 /* sspa pll id */
89 #define MMP_SYSCLK 0
90 #define MMP_SSPA_CLK 1
92 #endif /* _MMP_SSPA_H */