Linux 4.1.18
[linux/fpc-iii.git] / Documentation / devicetree / bindings / clock / imx31-clock.txt
blob19df842c694f0b7d9c42cd0944ed076d68aadf11
1 * Clock bindings for Freescale i.MX31
3 Required properties:
4 - compatible: Should be "fsl,imx31-ccm"
5 - reg: Address and length of the register set
6 - interrupts: Should contain CCM interrupt
7 - #clock-cells: Should be <1>
9 The clock consumer should specify the desired clock by having the clock
10 ID in its "clocks" phandle cell.  The following is a full list of i.MX31
11 clocks and IDs.
13         Clock               ID
14         -----------------------
15         dummy                0
16         ckih                 1
17         ckil                 2
18         mpll                 3
19         spll                 4
20         upll                 5
21         mcu_main             6
22         hsp                  7
23         ahb                  8
24         nfc                  9
25         ipg                  10
26         per_div              11
27         per                  12
28         csi_sel              13
29         fir_sel              14
30         csi_div              15
31         usb_div_pre          16
32         usb_div_post         17
33         fir_div_pre          18
34         fir_div_post         19
35         sdhc1_gate           20
36         sdhc2_gate           21
37         gpt_gate             22
38         epit1_gate           23
39         epit2_gate           24
40         iim_gate             25
41         ata_gate             26
42         sdma_gate            27
43         cspi3_gate           28
44         rng_gate             29
45         uart1_gate           30
46         uart2_gate           31
47         ssi1_gate            32
48         i2c1_gate            33
49         i2c2_gate            34
50         i2c3_gate            35
51         hantro_gate          36
52         mstick1_gate         37
53         mstick2_gate         38
54         csi_gate             39
55         rtc_gate             40
56         wdog_gate            41
57         pwm_gate             42
58         sim_gate             43
59         ect_gate             44
60         usb_gate             45
61         kpp_gate             46
62         ipu_gate             47
63         uart3_gate           48
64         uart4_gate           49
65         uart5_gate           50
66         owire_gate           51
67         ssi2_gate            52
68         cspi1_gate           53
69         cspi2_gate           54
70         gacc_gate            55
71         emi_gate             56
72         rtic_gate            57
73         firi_gate            58
75 Examples:
77 clks: ccm@53f80000{
78         compatible = "fsl,imx31-ccm";
79         reg = <0x53f80000 0x4000>;
80         interrupts = <0 31 0x04 0 53 0x04>;
81         #clock-cells = <1>;
84 uart1: serial@43f90000 {
85         compatible = "fsl,imx31-uart", "fsl,imx21-uart";
86         reg = <0x43f90000 0x4000>;
87         interrupts = <45>;
88         clocks = <&clks 10>, <&clks 30>;
89         clock-names = "ipg", "per";
90         status = "disabled";