1 * Renesas USB DMA Controller Device Tree bindings
4 - compatible: must contain "renesas,usb-dmac"
5 - reg: base address and length of the registers block for the DMAC
6 - interrupts: interrupt specifiers for the DMAC, one for each entry in
8 - interrupt-names: one entry per channel, named "ch%u", where %u is the
9 channel number ranging from zero to the number of channels minus one.
10 - clocks: a list of phandle + clock-specifier pairs.
11 - #dma-cells: must be <1>, the cell specifies the channel number of the DMAC
12 port connected to the DMA client.
13 - dma-channels: number of DMA channels
15 Example: R8A7790 (R-Car H2) USB-DMACs
17 usb_dmac0: dma-controller@e65a0000 {
18 compatible = "renesas,usb-dmac";
19 reg = <0 0xe65a0000 0 0x100>;
20 interrupts = <0 109 IRQ_TYPE_LEVEL_HIGH
21 0 109 IRQ_TYPE_LEVEL_HIGH>;
22 interrupt-names = "ch0", "ch1";
23 clocks = <&mstp3_clks R8A7790_CLK_USBDMAC0>;
28 usb_dmac1: dma-controller@e65b0000 {
29 compatible = "renesas,usb-dmac";
30 reg = <0 0xe65b0000 0 0x100>;
31 interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH
32 0 110 IRQ_TYPE_LEVEL_HIGH>;
33 interrupt-names = "ch0", "ch1";
34 clocks = <&mstp3_clks R8A7790_CLK_USBDMAC1>;