Documentation/devicetree/bindings/mfd/axp20x.txt

   1 AXP202/AXP209 device tree bindings
   2
   3 The axp20x family current members :
   4 axp202 (X-Powers)
   5 axp209 (X-Powers)
   6
   7 Required properties:
   8 - compatible: "x-powers,axp202" or "x-powers,axp209"
   9 - reg: The I2C slave address for the AXP chip
  10 - interrupt-parent: The parent interrupt controller
  11 - interrupts: SoC NMI / GPIO interrupt connected to the PMIC's IRQ pin
  12 - interrupt-controller: axp20x has its own internal IRQs
  13 - #interrupt-cells: Should be set to 1
  14
  15 Optional properties:
  16 - x-powers,dcdc-freq: defines the work frequency of DC-DC in KHz
  17                       (range: 750-1875). Default: 1.5MHz
  18 - <input>-supply: a phandle to the regulator supply node. May be omitted if
  19                   inputs are unregulated, such as using the IPSOUT output
  20                   from the PMIC.
  21
  22 - regulators: A node that houses a sub-node for each regulator. Regulators
  23               not used but preferred to be managed by the OS should be
  24               listed as well.
  25               See Documentation/devicetree/bindings/regulator/regulator.txt
  26               for more information on standard regulator bindings.
  27
  28 Optional properties for DCDC regulators:
  29 - x-powers,dcdc-workmode: 1 for PWM mode, 0 for AUTO (PWM/PFM) mode
  30                           Default: Current hardware setting
  31                           The DCDC regulators work in a mixed PWM/PFM mode,
  32                           using PFM under light loads and switching to PWM
  33                           for heavier loads. Forcing PWM mode trades efficiency
  34                           under light loads for lower output noise. This
  35                           probably makes sense for HiFi audio related
  36                           applications that aren't battery constrained.
  37
  38
  39 AXP202/AXP209 regulators, type, and corresponding input supply names:
  40
  41 Regulator         Type            Supply Name             Notes
  42 ---------         ----            -----------             -----
  43 DCDC2           : DC-DC buck    : vin2-supply
  44 DCDC3           : DC-DC buck    : vin3-supply
  45 LDO1            : LDO           : acin-supply           : always on
  46 LDO2            : LDO           : ldo24in-supply        : shared supply
  47 LDO3            : LDO           : ldo3in-supply
  48 LDO4            : LDO           : ldo24in-supply        : shared supply
  49 LDO5            : LDO           : ldo5in-supply
  50
  51 Example:
  52
  53 axp209: pmic@34 {
  54         compatible = "x-powers,axp209";
  55         reg = <0x34>;
  56         interrupt-parent = <&nmi_intc>;
  57         interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
  58         interrupt-controller;
  59         #interrupt-cells = <1>;
  60
  61         regulators {
  62                 x-powers,dcdc-freq = <1500>;
  63
  64                 vdd_cpu: dcdc2 {
  65                         regulator-always-on;
  66                         regulator-min-microvolt = <1000000>;
  67                         regulator-max-microvolt = <1450000>;
  68                         regulator-name = "vdd-cpu";
  69                 };
  70
  71                 vdd_int_dll: dcdc3 {
  72                         regulator-always-on;
  73                         regulator-min-microvolt = <1000000>;
  74                         regulator-max-microvolt = <1400000>;
  75                         regulator-name = "vdd-int-dll";
  76                 };
  77
  78                 vdd_rtc: ldo1 {
  79                         regulator-always-on;
  80                         regulator-min-microvolt = <1200000>;
  81                         regulator-max-microvolt = <1400000>;
  82                         regulator-name = "vdd-rtc";
  83                 };
  84
  85                 avcc: ldo2 {
  86                         regulator-always-on;
  87                         regulator-min-microvolt = <2700000>;
  88                         regulator-max-microvolt = <3300000>;
  89                         regulator-name = "avcc";
  90                 };
  91
  92                 ldo3 {
  93                         /* unused but preferred to be managed by OS */
  94                 };
  95         };
  96 };