Linux 4.1.18
[linux/fpc-iii.git] / Documentation / devicetree / bindings / video / rockchip-vop.txt
blobd15351f2313d662195ca1732e83de94e8760d015
1 device-tree bindings for rockchip soc display controller (vop)
3 VOP (Visual Output Processor) is the Display Controller for the Rockchip
4 series of SoCs which transfers the image data from a video memory
5 buffer to an external LCD interface.
7 Required properties:
8 - compatible: value should be one of the following
9                 "rockchip,rk3288-vop";
11 - interrupts: should contain a list of all VOP IP block interrupts in the
12                  order: VSYNC, LCD_SYSTEM. The interrupt specifier
13                  format depends on the interrupt controller used.
15 - clocks: must include clock specifiers corresponding to entries in the
16                 clock-names property.
18 - clock-names: Must contain
19                 aclk_vop: for ddr buffer transfer.
20                 hclk_vop: for ahb bus to R/W the phy regs.
21                 dclk_vop: pixel clock.
23 - resets: Must contain an entry for each entry in reset-names.
24   See ../reset/reset.txt for details.
25 - reset-names: Must include the following entries:
26   - axi
27   - ahb
28   - dclk
30 - iommus: required a iommu node
32 - port: A port node with endpoint definitions as defined in
33   Documentation/devicetree/bindings/media/video-interfaces.txt.
35 Example:
36 SoC specific DT entry:
37         vopb: vopb@ff930000 {
38                 compatible = "rockchip,rk3288-vop";
39                 reg = <0xff930000 0x19c>;
40                 interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
41                 clocks = <&cru ACLK_VOP0>, <&cru DCLK_VOP0>, <&cru HCLK_VOP0>;
42                 clock-names = "aclk_vop", "dclk_vop", "hclk_vop";
43                 resets = <&cru SRST_LCDC1_AXI>, <&cru SRST_LCDC1_AHB>, <&cru SRST_LCDC1_DCLK>;
44                 reset-names = "axi", "ahb", "dclk";
45                 iommus = <&vopb_mmu>;
46                 vopb_out: port {
47                         #address-cells = <1>;
48                         #size-cells = <0>;
49                         vopb_out_edp: endpoint@0 {
50                                 reg = <0>;
51                                 remote-endpoint=<&edp_in_vopb>;
52                         };
53                         vopb_out_hdmi: endpoint@1 {
54                                 reg = <1>;
55                                 remote-endpoint=<&hdmi_in_vopb>;
56                         };
57                 };
58         };