arch/mips/bcm47xx/prom.c

   1 /*
   2  *  Copyright (C) 2004 Florian Schirmer <jolt@tuxbox.org>
   3  *  Copyright (C) 2007 Aurelien Jarno <aurelien@aurel32.net>
   4  *  Copyright (C) 2010-2012 Hauke Mehrtens <hauke@hauke-m.de>
   5  *
   6  *  This program is free software; you can redistribute  it and/or modify it
   7  *  under  the terms of  the GNU General  Public License as published by the
   8  *  Free Software Foundation;  either version 2 of the  License, or (at your
   9  *  option) any later version.
  10  *
  11  *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
  12  *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
  13  *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
  14  *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
  15  *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
  16  *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
  17  *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
  18  *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
  19  *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
  20  *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  21  *
  22  *  You should have received a copy of the  GNU General Public License along
  23  *  with this program; if not, write  to the Free Software Foundation, Inc.,
  24  *  675 Mass Ave, Cambridge, MA 02139, USA.
  25  */
  26
  27 #include <linux/init.h>
  28 #include <linux/types.h>
  29 #include <linux/kernel.h>
  30 #include <linux/spinlock.h>
  31 #include <linux/ssb/ssb_driver_chipcommon.h>
  32 #include <linux/ssb/ssb_regs.h>
  33 #include <linux/smp.h>
  34 #include <asm/bootinfo.h>
  35 #include <bcm47xx.h>
  36 #include <bcm47xx_board.h>
  37
  38 static char bcm47xx_system_type[20] = "Broadcom BCM47XX";
  39
  40 const char *get_system_type(void)
  41 {
  42         return bcm47xx_system_type;
  43 }
  44
  45 __init void bcm47xx_set_system_type(u16 chip_id)
  46 {
  47         snprintf(bcm47xx_system_type, sizeof(bcm47xx_system_type),
  48                  (chip_id > 0x9999) ? "Broadcom BCM%d" :
  49                                       "Broadcom BCM%04X",
  50                  chip_id);
  51 }
  52
  53 static unsigned long lowmem __initdata;
  54
  55 static __init void prom_init_mem(void)
  56 {
  57         unsigned long mem;
  58         unsigned long max;
  59         unsigned long off;
  60         struct cpuinfo_mips *c = &current_cpu_data;
  61
  62         /* Figure out memory size by finding aliases.
  63          *
  64          * We should theoretically use the mapping from CFE using cfe_enummem().
  65          * However as the BCM47XX is mostly used on low-memory systems, we
  66          * want to reuse the memory used by CFE (around 4MB). That means cfe_*
  67          * functions stop to work at some point during the boot, we should only
  68          * call them at the beginning of the boot.
  69          *
  70          * BCM47XX uses 128MB for addressing the ram, if the system contains
  71          * less that that amount of ram it remaps the ram more often into the
  72          * available space.
  73          */
  74
  75         /* Physical address, without mapping to any kernel segment */
  76         off = CPHYSADDR((unsigned long)prom_init);
  77
  78         /* Accessing memory after 128 MiB will cause an exception */
  79         max = 128 << 20;
  80
  81         for (mem = 1 << 20; mem < max; mem += 1 << 20) {
  82                 /* Loop condition may be not enough, off may be over 1 MiB */
  83                 if (off + mem >= max) {
  84                         mem = max;
  85                         pr_debug("Assume 128MB RAM\n");
  86                         break;
  87                 }
  88                 if (!memcmp(prom_init, prom_init + mem, 32))
  89                         break;
  90         }
  91         lowmem = mem;
  92
  93         /* Ignoring the last page when ddr size is 128M. Cached
  94          * accesses to last page is causing the processor to prefetch
  95          * using address above 128M stepping out of the ddr address
  96          * space.
  97          */
  98         if (c->cputype == CPU_74K && (mem == (128  << 20)))
  99                 mem -= 0x1000;
 100         add_memory_region(0, mem, BOOT_MEM_RAM);
 101 }
 102
 103 /*
 104  * This is the first serial on the chip common core, it is at this position
 105  * for sb (ssb) and ai (bcma) bus.
 106  */
 107 #define BCM47XX_SERIAL_ADDR (SSB_ENUM_BASE + SSB_CHIPCO_UART0_DATA)
 108
 109 void __init prom_init(void)
 110 {
 111         prom_init_mem();
 112         setup_8250_early_printk_port(CKSEG1ADDR(BCM47XX_SERIAL_ADDR), 0, 0);
 113 }
 114
 115 void __init prom_free_prom_memory(void)
 116 {
 117 }
 118
 119 #if defined(CONFIG_BCM47XX_BCMA) && defined(CONFIG_HIGHMEM)
 120
 121 #define EXTVBASE        0xc0000000
 122 #define ENTRYLO(x)      ((pte_val(pfn_pte((x) >> _PFN_SHIFT, PAGE_KERNEL_UNCACHED)) >> 6) | 1)
 123
 124 #include <asm/tlbflush.h>
 125
 126 /* Stripped version of tlb_init, with the call to build_tlb_refill_handler
 127  * dropped. Calling it at this stage causes a hang.
 128  */
 129 void __cpuinit early_tlb_init(void)
 130 {
 131         write_c0_pagemask(PM_DEFAULT_MASK);
 132         write_c0_wired(0);
 133         temp_tlb_entry = current_cpu_data.tlbsize - 1;
 134         local_flush_tlb_all();
 135 }
 136
 137 void __init bcm47xx_prom_highmem_init(void)
 138 {
 139         unsigned long off = (unsigned long)prom_init;
 140         unsigned long extmem = 0;
 141         bool highmem_region = false;
 142
 143         if (WARN_ON(bcm47xx_bus_type != BCM47XX_BUS_TYPE_BCMA))
 144                 return;
 145
 146         if (bcm47xx_bus.bcma.bus.chipinfo.id == BCMA_CHIP_ID_BCM4706)
 147                 highmem_region = true;
 148
 149         if (lowmem != 128 << 20 || !highmem_region)
 150                 return;
 151
 152         early_tlb_init();
 153
 154         /* Add one temporary TLB entry to map SDRAM Region 2.
 155          *      Physical        Virtual
 156          *      0x80000000      0xc0000000      (1st: 256MB)
 157          *      0x90000000      0xd0000000      (2nd: 256MB)
 158          */
 159         add_temporary_entry(ENTRYLO(0x80000000),
 160                             ENTRYLO(0x80000000 + (256 << 20)),
 161                             EXTVBASE, PM_256M);
 162
 163         off = EXTVBASE + __pa(off);
 164         for (extmem = 128 << 20; extmem < 512 << 20; extmem <<= 1) {
 165                 if (!memcmp(prom_init, (void *)(off + extmem), 16))
 166                         break;
 167         }
 168         extmem -= lowmem;
 169
 170         early_tlb_init();
 171
 172         if (!extmem)
 173                 return;
 174
 175         pr_warn("Found %lu MiB of extra memory, but highmem is unsupported yet!\n",
 176                 extmem >> 20);
 177
 178         /* TODO: Register extra memory */
 179 }
 180
 181 #endif /* defined(CONFIG_BCM47XX_BCMA) && defined(CONFIG_HIGHMEM) */