Linux 4.1.18
[linux/fpc-iii.git] / arch / mips / boot / dts / brcm / bcm7346.dtsi
blob1f30728a317719968a9acf371b04f0e54087ae24
1 / {
2         #address-cells = <1>;
3         #size-cells = <1>;
4         compatible = "brcm,bcm7346";
6         cpus {
7                 #address-cells = <1>;
8                 #size-cells = <0>;
10                 mips-hpt-frequency = <163125000>;
12                 cpu@0 {
13                         compatible = "brcm,bmips5000";
14                         device_type = "cpu";
15                         reg = <0>;
16                 };
18                 cpu@1 {
19                         compatible = "brcm,bmips5000";
20                         device_type = "cpu";
21                         reg = <1>;
22                 };
23         };
25         aliases {
26                 uart0 = &uart0;
27         };
29         cpu_intc: cpu_intc {
30                 #address-cells = <0>;
31                 compatible = "mti,cpu-interrupt-controller";
33                 interrupt-controller;
34                 #interrupt-cells = <1>;
35         };
37         clocks {
38                 uart_clk: uart_clk {
39                         compatible = "fixed-clock";
40                         #clock-cells = <0>;
41                         clock-frequency = <81000000>;
42                 };
43         };
45         rdb {
46                 #address-cells = <1>;
47                 #size-cells = <1>;
49                 compatible = "simple-bus";
50                 ranges = <0 0x10000000 0x01000000>;
52                 periph_intc: periph_intc@411400 {
53                         compatible = "brcm,bcm7038-l1-intc";
54                         reg = <0x411400 0x30>, <0x411600 0x30>;
56                         interrupt-controller;
57                         #interrupt-cells = <1>;
59                         interrupt-parent = <&cpu_intc>;
60                         interrupts = <2>, <3>;
61                 };
63                 sun_l2_intc: sun_l2_intc@403000 {
64                         compatible = "brcm,l2-intc";
65                         reg = <0x403000 0x30>;
66                         interrupt-controller;
67                         #interrupt-cells = <1>;
68                         interrupt-parent = <&periph_intc>;
69                         interrupts = <51>;
70                 };
72                 gisb-arb@400000 {
73                         compatible = "brcm,bcm7400-gisb-arb";
74                         reg = <0x400000 0xdc>;
75                         native-endian;
76                         interrupt-parent = <&sun_l2_intc>;
77                         interrupts = <0>, <2>;
78                         brcm,gisb-arb-master-mask = <0x673>;
79                         brcm,gisb-arb-master-names = "ssp_0", "cpu_0", "bsp_0",
80                                                      "rdc_0", "raaga_0",
81                                                      "jtag_0", "svd_0";
82                 };
84                 upg_irq0_intc: upg_irq0_intc@406780 {
85                         compatible = "brcm,bcm7120-l2-intc";
86                         reg = <0x406780 0x8>;
88                         brcm,int-map-mask = <0x44>;
89                         brcm,int-fwd-mask = <0x70000>;
91                         interrupt-controller;
92                         #interrupt-cells = <1>;
94                         interrupt-parent = <&periph_intc>;
95                         interrupts = <59>;
96                 };
98                 sun_top_ctrl: syscon@404000 {
99                         compatible = "brcm,bcm7346-sun-top-ctrl", "syscon";
100                         reg = <0x404000 0x51c>;
101                         little-endian;
102                 };
104                 reboot {
105                         compatible = "brcm,brcmstb-reboot";
106                         syscon = <&sun_top_ctrl 0x304 0x308>;
107                 };
109                 uart0: serial@406900 {
110                         compatible = "ns16550a";
111                         reg = <0x406900 0x20>;
112                         reg-io-width = <0x4>;
113                         reg-shift = <0x2>;
114                         native-endian;
115                         interrupt-parent = <&periph_intc>;
116                         interrupts = <64>;
117                         clocks = <&uart_clk>;
118                         status = "disabled";
119                 };
121                 enet0: ethernet@430000 {
122                         phy-mode = "internal";
123                         phy-handle = <&phy1>;
124                         mac-address = [ 00 10 18 36 23 1a ];
125                         compatible = "brcm,genet-v2";
126                         #address-cells = <0x1>;
127                         #size-cells = <0x1>;
128                         reg = <0x430000 0x4c8c>;
129                         interrupts = <24>, <25>;
130                         interrupt-parent = <&periph_intc>;
131                         status = "disabled";
133                         mdio@e14 {
134                                 compatible = "brcm,genet-mdio-v2";
135                                 #address-cells = <0x1>;
136                                 #size-cells = <0x0>;
137                                 reg = <0xe14 0x8>;
139                                 phy1: ethernet-phy@1 {
140                                         max-speed = <100>;
141                                         reg = <0x1>;
142                                         compatible = "brcm,40nm-ephy",
143                                                 "ethernet-phy-ieee802.3-c22";
144                                 };
145                         };
146                 };
148                 ehci0: usb@480300 {
149                         compatible = "brcm,bcm7346-ehci", "generic-ehci";
150                         reg = <0x480300 0x100>;
151                         native-endian;
152                         interrupt-parent = <&periph_intc>;
153                         interrupts = <68>;
154                         status = "disabled";
155                 };
157                 ohci0: usb@480400 {
158                         compatible = "brcm,bcm7346-ohci", "generic-ohci";
159                         reg = <0x480400 0x100>;
160                         native-endian;
161                         no-big-frame-no;
162                         interrupt-parent = <&periph_intc>;
163                         interrupts = <70>;
164                         status = "disabled";
165                 };
167                 ehci1: usb@480500 {
168                         compatible = "brcm,bcm7346-ehci", "generic-ehci";
169                         reg = <0x480500 0x100>;
170                         native-endian;
171                         interrupt-parent = <&periph_intc>;
172                         interrupts = <69>;
173                         status = "disabled";
174                 };
176                 ohci1: usb@480600 {
177                         compatible = "brcm,bcm7346-ohci", "generic-ohci";
178                         reg = <0x480600 0x100>;
179                         native-endian;
180                         no-big-frame-no;
181                         interrupt-parent = <&periph_intc>;
182                         interrupts = <71>;
183                         status = "disabled";
184                 };
186                 ehci2: usb@490300 {
187                         compatible = "brcm,bcm7346-ehci", "generic-ehci";
188                         reg = <0x490300 0x100>;
189                         native-endian;
190                         interrupt-parent = <&periph_intc>;
191                         interrupts = <73>;
192                         status = "disabled";
193                 };
195                 ohci2: usb@490400 {
196                         compatible = "brcm,bcm7346-ohci", "generic-ohci";
197                         reg = <0x490400 0x100>;
198                         native-endian;
199                         no-big-frame-no;
200                         interrupt-parent = <&periph_intc>;
201                         interrupts = <75>;
202                         status = "disabled";
203                 };
205                 ehci3: usb@490500 {
206                         compatible = "brcm,bcm7346-ehci", "generic-ehci";
207                         reg = <0x490500 0x100>;
208                         native-endian;
209                         interrupt-parent = <&periph_intc>;
210                         interrupts = <74>;
211                         status = "disabled";
212                 };
214                 ohci3: usb@490600 {
215                         compatible = "brcm,bcm7346-ohci", "generic-ohci";
216                         reg = <0x490600 0x100>;
217                         native-endian;
218                         no-big-frame-no;
219                         interrupt-parent = <&periph_intc>;
220                         interrupts = <76>;
221                         status = "disabled";
222                 };
223         };