Linux 4.1.18
[linux/fpc-iii.git] / arch / mips / boot / dts / brcm / bcm7425.dtsi
blob5b660b617eaddb799d04ad6f2e86f15fd767e17e
1 / {
2         #address-cells = <1>;
3         #size-cells = <1>;
4         compatible = "brcm,bcm7425";
6         cpus {
7                 #address-cells = <1>;
8                 #size-cells = <0>;
10                 mips-hpt-frequency = <163125000>;
12                 cpu@0 {
13                         compatible = "brcm,bmips5000";
14                         device_type = "cpu";
15                         reg = <0>;
16                 };
18                 cpu@1 {
19                         compatible = "brcm,bmips5000";
20                         device_type = "cpu";
21                         reg = <1>;
22                 };
23         };
25         aliases {
26                 uart0 = &uart0;
27         };
29         cpu_intc: cpu_intc {
30                 #address-cells = <0>;
31                 compatible = "mti,cpu-interrupt-controller";
33                 interrupt-controller;
34                 #interrupt-cells = <1>;
35         };
37         clocks {
38                 uart_clk: uart_clk {
39                         compatible = "fixed-clock";
40                         #clock-cells = <0>;
41                         clock-frequency = <81000000>;
42                 };
43         };
45         rdb {
46                 #address-cells = <1>;
47                 #size-cells = <1>;
49                 compatible = "simple-bus";
50                 ranges = <0 0x10000000 0x01000000>;
52                 periph_intc: periph_intc@41a400 {
53                         compatible = "brcm,bcm7038-l1-intc";
54                         reg = <0x41a400 0x30>, <0x41a600 0x30>;
56                         interrupt-controller;
57                         #interrupt-cells = <1>;
59                         interrupt-parent = <&cpu_intc>;
60                         interrupts = <2>, <3>;
61                 };
63                 sun_l2_intc: sun_l2_intc@403000 {
64                         compatible = "brcm,l2-intc";
65                         reg = <0x403000 0x30>;
66                         interrupt-controller;
67                         #interrupt-cells = <1>;
68                         interrupt-parent = <&periph_intc>;
69                         interrupts = <47>;
70                 };
72                 gisb-arb@400000 {
73                         compatible = "brcm,bcm7400-gisb-arb";
74                         reg = <0x400000 0xdc>;
75                         native-endian;
76                         interrupt-parent = <&sun_l2_intc>;
77                         interrupts = <0>, <2>;
78                         brcm,gisb-arb-master-mask = <0x177b>;
79                         brcm,gisb-arb-master-names = "ssp_0", "cpu_0", "pcie_0",
80                                                      "bsp_0", "rdc_0",
81                                                      "raaga_0", "avd_1",
82                                                      "jtag_0", "svd_0",
83                                                      "vice_0";
84                 };
86                 upg_irq0_intc: upg_irq0_intc@406780 {
87                         compatible = "brcm,bcm7120-l2-intc";
88                         reg = <0x406780 0x8>;
90                         brcm,int-map-mask = <0x44>;
91                         brcm,int-fwd-mask = <0x70000>;
93                         interrupt-controller;
94                         #interrupt-cells = <1>;
96                         interrupt-parent = <&periph_intc>;
97                         interrupts = <55>;
98                 };
100                 sun_top_ctrl: syscon@404000 {
101                         compatible = "brcm,bcm7425-sun-top-ctrl", "syscon";
102                         reg = <0x404000 0x51c>;
103                         little-endian;
104                 };
106                 reboot {
107                         compatible = "brcm,brcmstb-reboot";
108                         syscon = <&sun_top_ctrl 0x304 0x308>;
109                 };
111                 uart0: serial@406b00 {
112                         compatible = "ns16550a";
113                         reg = <0x406b00 0x20>;
114                         reg-io-width = <0x4>;
115                         reg-shift = <0x2>;
116                         interrupt-parent = <&periph_intc>;
117                         interrupts = <61>;
118                         clocks = <&uart_clk>;
119                         status = "disabled";
120                 };
122                 enet0: ethernet@b80000 {
123                         phy-mode = "internal";
124                         phy-handle = <&phy1>;
125                         mac-address = [ 00 10 18 36 23 1a ];
126                         compatible = "brcm,genet-v3";
127                         #address-cells = <0x1>;
128                         #size-cells = <0x1>;
129                         reg = <0xb80000 0x11c88>;
130                         interrupts = <17>, <18>;
131                         interrupt-parent = <&periph_intc>;
132                         status = "disabled";
134                         mdio@e14 {
135                                 compatible = "brcm,genet-mdio-v3";
136                                 #address-cells = <0x1>;
137                                 #size-cells = <0x0>;
138                                 reg = <0xe14 0x8>;
140                                 phy1: ethernet-phy@1 {
141                                         max-speed = <100>;
142                                         reg = <0x1>;
143                                         compatible = "brcm,40nm-ephy",
144                                                 "ethernet-phy-ieee802.3-c22";
145                                 };
146                         };
147                 };
149                 ehci0: usb@480300 {
150                         compatible = "brcm,bcm7425-ehci", "generic-ehci";
151                         reg = <0x480300 0x100>;
152                         native-endian;
153                         interrupt-parent = <&periph_intc>;
154                         interrupts = <65>;
155                         status = "disabled";
156                 };
158                 ohci0: usb@480400 {
159                         compatible = "brcm,bcm7425-ohci", "generic-ohci";
160                         reg = <0x480400 0x100>;
161                         native-endian;
162                         no-big-frame-no;
163                         interrupt-parent = <&periph_intc>;
164                         interrupts = <67>;
165                         status = "disabled";
166                 };
168                 ehci1: usb@480500 {
169                         compatible = "brcm,bcm7425-ehci", "generic-ehci";
170                         reg = <0x480500 0x100>;
171                         native-endian;
172                         interrupt-parent = <&periph_intc>;
173                         interrupts = <66>;
174                         status = "disabled";
175                 };
177                 ohci1: usb@480600 {
178                         compatible = "brcm,bcm7425-ohci", "generic-ohci";
179                         reg = <0x480600 0x100>;
180                         native-endian;
181                         no-big-frame-no;
182                         interrupt-parent = <&periph_intc>;
183                         interrupts = <68>;
184                         status = "disabled";
185                 };
187                 ehci2: usb@490300 {
188                         compatible = "brcm,bcm7425-ehci", "generic-ehci";
189                         reg = <0x490300 0x100>;
190                         native-endian;
191                         interrupt-parent = <&periph_intc>;
192                         interrupts = <70>;
193                         status = "disabled";
194                 };
196                 ohci2: usb@490400 {
197                         compatible = "brcm,bcm7425-ohci", "generic-ohci";
198                         reg = <0x490400 0x100>;
199                         native-endian;
200                         no-big-frame-no;
201                         interrupt-parent = <&periph_intc>;
202                         interrupts = <72>;
203                         status = "disabled";
204                 };
206                 ehci3: usb@490500 {
207                         compatible = "brcm,bcm7425-ehci", "generic-ehci";
208                         reg = <0x490500 0x100>;
209                         native-endian;
210                         interrupt-parent = <&periph_intc>;
211                         interrupts = <71>;
212                         status = "disabled";
213                 };
215                 ohci3: usb@490600 {
216                         compatible = "brcm,bcm7425-ohci", "generic-ohci";
217                         reg = <0x490600 0x100>;
218                         native-endian;
219                         no-big-frame-no;
220                         interrupt-parent = <&periph_intc>;
221                         interrupts = <73>;
222                         status = "disabled";
223                 };
224         };