Linux 4.1.18
[linux/fpc-iii.git] / arch / mips / pci / pci-bcm1480ht.c
blob1263c5e7dbe12d4acc0e38051d4ba12bff9cc98e
1 /*
2 * Copyright (C) 2001,2002,2005 Broadcom Corporation
3 * Copyright (C) 2004 by Ralf Baechle (ralf@linux-mips.org)
5 * This program is free software; you can redistribute it and/or
6 * modify it under the terms of the GNU General Public License
7 * as published by the Free Software Foundation; either version 2
8 * of the License, or (at your option) any later version.
10 * This program is distributed in the hope that it will be useful,
11 * but WITHOUT ANY WARRANTY; without even the implied warranty of
12 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 * GNU General Public License for more details.
15 * You should have received a copy of the GNU General Public License
16 * along with this program; if not, write to the Free Software
17 * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
21 * BCM1480/1455-specific HT support (looking like PCI)
23 * This module provides the glue between Linux's PCI subsystem
24 * and the hardware. We basically provide glue for accessing
25 * configuration space, and set up the translation for I/O
26 * space accesses.
28 * To access configuration space, we use ioremap. In the 32-bit
29 * kernel, this consumes either 4 or 8 page table pages, and 16MB of
30 * kernel mapped memory. Hopefully neither of these should be a huge
31 * problem.
34 #include <linux/types.h>
35 #include <linux/pci.h>
36 #include <linux/kernel.h>
37 #include <linux/init.h>
38 #include <linux/mm.h>
39 #include <linux/console.h>
40 #include <linux/tty.h>
42 #include <asm/sibyte/bcm1480_regs.h>
43 #include <asm/sibyte/bcm1480_scd.h>
44 #include <asm/sibyte/board.h>
45 #include <asm/io.h>
48 * Macros for calculating offsets into config space given a device
49 * structure or dev/fun/reg
51 #define CFGOFFSET(bus, devfn, where) (((bus)<<16)+((devfn)<<8)+(where))
52 #define CFGADDR(bus, devfn, where) CFGOFFSET((bus)->number, (devfn), where)
54 static void *ht_cfg_space;
56 #define PCI_BUS_ENABLED 1
57 #define PCI_DEVICE_MODE 2
59 static int bcm1480ht_bus_status;
61 #define PCI_BRIDGE_DEVICE 0
62 #define HT_BRIDGE_DEVICE 1
65 * HT's level-sensitive interrupts require EOI, which is generated
66 * through a 4MB memory-mapped region
68 unsigned long ht_eoi_space;
71 * Read/write 32-bit values in config space.
73 static inline u32 READCFG32(u32 addr)
75 return *(u32 *)(ht_cfg_space + (addr&~3));
78 static inline void WRITECFG32(u32 addr, u32 data)
80 *(u32 *)(ht_cfg_space + (addr & ~3)) = data;
84 * Some checks before doing config cycles:
85 * In PCI Device Mode, hide everything on bus 0 except the LDT host
86 * bridge. Otherwise, access is controlled by bridge MasterEn bits.
88 static int bcm1480ht_can_access(struct pci_bus *bus, int devfn)
90 u32 devno;
92 if (!(bcm1480ht_bus_status & (PCI_BUS_ENABLED | PCI_DEVICE_MODE)))
93 return 0;
95 if (bus->number == 0) {
96 devno = PCI_SLOT(devfn);
97 if (bcm1480ht_bus_status & PCI_DEVICE_MODE)
98 return 0;
100 return 1;
104 * Read/write access functions for various sizes of values
105 * in config space. Return all 1's for disallowed accesses
106 * for a kludgy but adequate simulation of master aborts.
109 static int bcm1480ht_pcibios_read(struct pci_bus *bus, unsigned int devfn,
110 int where, int size, u32 * val)
112 u32 data = 0;
114 if ((size == 2) && (where & 1))
115 return PCIBIOS_BAD_REGISTER_NUMBER;
116 else if ((size == 4) && (where & 3))
117 return PCIBIOS_BAD_REGISTER_NUMBER;
119 if (bcm1480ht_can_access(bus, devfn))
120 data = READCFG32(CFGADDR(bus, devfn, where));
121 else
122 data = 0xFFFFFFFF;
124 if (size == 1)
125 *val = (data >> ((where & 3) << 3)) & 0xff;
126 else if (size == 2)
127 *val = (data >> ((where & 3) << 3)) & 0xffff;
128 else
129 *val = data;
131 return PCIBIOS_SUCCESSFUL;
134 static int bcm1480ht_pcibios_write(struct pci_bus *bus, unsigned int devfn,
135 int where, int size, u32 val)
137 u32 cfgaddr = CFGADDR(bus, devfn, where);
138 u32 data = 0;
140 if ((size == 2) && (where & 1))
141 return PCIBIOS_BAD_REGISTER_NUMBER;
142 else if ((size == 4) && (where & 3))
143 return PCIBIOS_BAD_REGISTER_NUMBER;
145 if (!bcm1480ht_can_access(bus, devfn))
146 return PCIBIOS_BAD_REGISTER_NUMBER;
148 data = READCFG32(cfgaddr);
150 if (size == 1)
151 data = (data & ~(0xff << ((where & 3) << 3))) |
152 (val << ((where & 3) << 3));
153 else if (size == 2)
154 data = (data & ~(0xffff << ((where & 3) << 3))) |
155 (val << ((where & 3) << 3));
156 else
157 data = val;
159 WRITECFG32(cfgaddr, data);
161 return PCIBIOS_SUCCESSFUL;
164 static int bcm1480ht_pcibios_get_busno(void)
166 return 0;
169 struct pci_ops bcm1480ht_pci_ops = {
170 .read = bcm1480ht_pcibios_read,
171 .write = bcm1480ht_pcibios_write,
174 static struct resource bcm1480ht_mem_resource = {
175 .name = "BCM1480 HT MEM",
176 .start = A_BCM1480_PHYS_HT_MEM_MATCH_BYTES,
177 .end = A_BCM1480_PHYS_HT_MEM_MATCH_BYTES + 0x1fffffffUL,
178 .flags = IORESOURCE_MEM,
181 static struct resource bcm1480ht_io_resource = {
182 .name = "BCM1480 HT I/O",
183 .start = A_BCM1480_PHYS_HT_IO_MATCH_BYTES,
184 .end = A_BCM1480_PHYS_HT_IO_MATCH_BYTES + 0x01ffffffUL,
185 .flags = IORESOURCE_IO,
188 struct pci_controller bcm1480ht_controller = {
189 .pci_ops = &bcm1480ht_pci_ops,
190 .mem_resource = &bcm1480ht_mem_resource,
191 .io_resource = &bcm1480ht_io_resource,
192 .index = 1,
193 .get_busno = bcm1480ht_pcibios_get_busno,
194 .io_offset = A_BCM1480_PHYS_HT_IO_MATCH_BYTES,
197 static int __init bcm1480ht_pcibios_init(void)
199 ht_cfg_space = ioremap(A_BCM1480_PHYS_HT_CFG_MATCH_BITS, 16*1024*1024);
201 /* CFE doesn't always init all HT paths, so we always scan */
202 bcm1480ht_bus_status |= PCI_BUS_ENABLED;
204 ht_eoi_space = (unsigned long)
205 ioremap(A_BCM1480_PHYS_HT_SPECIAL_MATCH_BYTES,
206 4 * 1024 * 1024);
207 bcm1480ht_controller.io_map_base = (unsigned long)
208 ioremap(A_BCM1480_PHYS_HT_IO_MATCH_BYTES, 65536);
209 bcm1480ht_controller.io_map_base -= bcm1480ht_controller.io_offset;
211 register_pci_controller(&bcm1480ht_controller);
213 return 0;
216 arch_initcall(bcm1480ht_pcibios_init);