arch/mn10300/kernel/mn10300-serial.h

   1 /* MN10300 On-chip serial port driver definitions
   2  *
   3  * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
   4  * Written by David Howells (dhowells@redhat.com)
   5  *
   6  * This program is free software; you can redistribute it and/or
   7  * modify it under the terms of the GNU General Public Licence
   8  * as published by the Free Software Foundation; either version
   9  * 2 of the Licence, or (at your option) any later version.
  10  */
  11 #ifndef _MN10300_SERIAL_H
  12 #define _MN10300_SERIAL_H
  13
  14 #ifndef __ASSEMBLY__
  15 #include <linux/serial_core.h>
  16 #include <linux/termios.h>
  17 #endif
  18
  19 #include <asm/page.h>
  20 #include <asm/serial-regs.h>
  21
  22 #define NR_PORTS                3               /* should be set 3 or 9 or 16 */
  23
  24 #define MNSC_BUFFER_SIZE        +(PAGE_SIZE / 2)
  25
  26 /* intr_flags bits */
  27 #define MNSCx_RX_AVAIL          0x01
  28 #define MNSCx_RX_OVERF          0x02
  29 #define MNSCx_TX_SPACE          0x04
  30 #define MNSCx_TX_EMPTY          0x08
  31
  32 /* tx_flags bits */
  33 #define MNSCx_TX_BREAK          0x01
  34 #define MNSCx_TX_STOP           0x02
  35
  36 #ifndef __ASSEMBLY__
  37
  38 struct mn10300_serial_port {
  39         char                    *rx_buffer;     /* reception buffer base */
  40         unsigned                rx_inp;         /* pointer to rx input offset */
  41         unsigned                rx_outp;        /* pointer to rx output offset */
  42         u8                      tx_xchar;       /* high-priority XON/XOFF buffer */
  43         u8                      tx_flags;       /* transmit break/stop request */
  44         u8                      intr_flags;     /* interrupt flags */
  45         volatile u16            *rx_icr;        /* Rx interrupt control register */
  46         volatile u16            *tx_icr;        /* Tx interrupt control register */
  47         int                     rx_irq;         /* reception IRQ */
  48         int                     tx_irq;         /* transmission IRQ */
  49         int                     tm_irq;         /* timer IRQ */
  50
  51         const char              *name;          /* name of serial port */
  52         const char              *rx_name;       /* Rx interrupt handler name of serial port */
  53         const char              *tx_name;       /* Tx interrupt handler name of serial port */
  54         const char              *tm_name;       /* Timer interrupt handler name */
  55         unsigned short          type;           /* type of serial port */
  56         unsigned char           isconsole;      /* T if it's a console */
  57         volatile void           *_iobase;       /* pointer to base of I/O control regs */
  58         volatile u16            *_control;      /* control register pointer */
  59         volatile u8             *_status;       /* status register pointer */
  60         volatile u8             *_intr;         /* interrupt register pointer */
  61         volatile u8             *_rxb;          /* receive buffer register pointer */
  62         volatile u8             *_txb;          /* transmit buffer register pointer */
  63         volatile u16            *_tmicr;        /* timer interrupt control register */
  64         volatile u8             *_tmxmd;        /* baud rate timer mode register */
  65         volatile u16            *_tmxbr;        /* baud rate timer base register */
  66
  67         /* this must come down here so that assembly can use BSET to access the
  68          * above fields */
  69         struct uart_port        uart;
  70
  71         unsigned short          rx_brk;         /* current break reception status */
  72         u16                     tx_cts;         /* current CTS status */
  73         int                     gdbstub;        /* preemptively stolen by GDB stub */
  74
  75         u8                      clock_src;      /* clock source */
  76 #define MNSCx_CLOCK_SRC_IOCLK   0
  77 #define MNSCx_CLOCK_SRC_IOBCLK  1
  78
  79         u8                      div_timer;      /* timer used as divisor */
  80 #define MNSCx_DIV_TIMER_16BIT   0
  81 #define MNSCx_DIV_TIMER_8BIT    1
  82
  83         u16                     options;        /* options */
  84 #define MNSCx_OPT_CTS           0x0001
  85
  86         unsigned long           ioclk;          /* base clock rate */
  87 };
  88
  89 #ifdef CONFIG_MN10300_TTYSM0
  90 extern struct mn10300_serial_port mn10300_serial_port_sif0;
  91 #endif
  92
  93 #ifdef CONFIG_MN10300_TTYSM1
  94 extern struct mn10300_serial_port mn10300_serial_port_sif1;
  95 #endif
  96
  97 #ifdef CONFIG_MN10300_TTYSM2
  98 extern struct mn10300_serial_port mn10300_serial_port_sif2;
  99 #endif
 100
 101 extern struct mn10300_serial_port *mn10300_serial_ports[];
 102
 103 struct mn10300_serial_int {
 104         struct mn10300_serial_port *port;
 105         asmlinkage void (*vdma)(void);
 106 };
 107
 108 extern struct mn10300_serial_int mn10300_serial_int_tbl[];
 109
 110 extern asmlinkage void mn10300_serial_vdma_interrupt(void);
 111 extern asmlinkage void mn10300_serial_vdma_rx_handler(void);
 112 extern asmlinkage void mn10300_serial_vdma_tx_handler(void);
 113
 114 #endif /* __ASSEMBLY__ */
 115
 116 #if defined(CONFIG_GDBSTUB_ON_TTYSM0)
 117 #define SCgSTR SC0STR
 118 #define SCgRXB SC0RXB
 119 #define SCgRXIRQ SC0RXIRQ
 120 #elif defined(CONFIG_GDBSTUB_ON_TTYSM1)
 121 #define SCgSTR SC1STR
 122 #define SCgRXB SC1RXB
 123 #define SCgRXIRQ SC1RXIRQ
 124 #elif defined(CONFIG_GDBSTUB_ON_TTYSM2)
 125 #define SCgSTR SC2STR
 126 #define SCgRXB SC2RXB
 127 #define SCgRXIRQ SC2RXIRQ
 128 #endif
 129
 130 #endif /* _MN10300_SERIAL_H */