2 * MPC8569E MDS Device Tree Source
4 * Copyright (C) 2009 Freescale Semiconductor Inc.
6 * This program is free software; you can redistribute it and/or modify it
7 * under the terms of the GNU General Public License as published by the
8 * Free Software Foundation; either version 2 of the License, or (at your
9 * option) any later version.
12 /include/ "fsl/mpc8569si-pre.dtsi"
15 model = "MPC8569EMDS";
16 compatible = "fsl,MPC8569EMDS";
19 interrupt-parent = <&mpic>;
30 device_type = "memory";
33 lbc: localbus@e0005000 {
34 reg = <0x0 0xe0005000 0x0 0x1000>;
36 ranges = <0x0 0x0 0x0 0xfe000000 0x02000000
37 0x1 0x0 0x0 0xf8000000 0x00008000
38 0x2 0x0 0x0 0xf0000000 0x04000000
39 0x3 0x0 0x0 0xfc000000 0x00008000
40 0x4 0x0 0x0 0xf8008000 0x00008000
41 0x5 0x0 0x0 0xf8010000 0x00008000>;
46 compatible = "cfi-flash";
47 reg = <0x0 0x0 0x02000000>;
52 reg = <0x00000000 0x01c00000>;
56 reg = <0x01c00000 0x002e0000>;
60 reg = <0x01ee0000 0x00020000>;
64 reg = <0x01f00000 0x00080000>;
69 reg = <0x01f80000 0x00080000>;
77 compatible = "fsl,mpc8569mds-bcsr";
79 ranges = <0 1 0 0x8000>;
81 bcsr17: gpio-controller@11 {
83 compatible = "fsl,mpc8569mds-bcsr-gpio";
90 compatible = "fsl,mpc8569-fcm-nand",
96 compatible = "fsl,mpc8569mds-pib";
101 compatible = "fsl,mpc8569mds-pib";
107 ranges = <0x0 0x0 0xe0000000 0x100000>;
112 compatible = "dallas,ds1374";
114 interrupts = <3 1 0 0>;
128 qe_pio_e: gpio-controller@80 {
130 compatible = "fsl,mpc8569-qe-pario-bank",
131 "fsl,mpc8323-qe-pario-bank";
136 qe_pio_f: gpio-controller@a0 {
138 compatible = "fsl,mpc8569-qe-pario-bank",
139 "fsl,mpc8323-qe-pario-bank";
146 /* port pin dir open_drain assignment has_irq */
147 0x2 0x1f 0x1 0x0 0x1 0x0 /* QE_MUX_MDC */
148 0x2 0x1e 0x3 0x0 0x2 0x0 /* QE_MUX_MDIO */
149 0x2 0x0b 0x2 0x0 0x1 0x0 /* CLK12*/
150 0x0 0x0 0x1 0x0 0x3 0x0 /* ENET1_TXD0_SER1_TXD0 */
151 0x0 0x1 0x1 0x0 0x3 0x0 /* ENET1_TXD1_SER1_TXD1 */
152 0x0 0x2 0x1 0x0 0x1 0x0 /* ENET1_TXD2_SER1_TXD2 */
153 0x0 0x3 0x1 0x0 0x2 0x0 /* ENET1_TXD3_SER1_TXD3 */
154 0x0 0x6 0x2 0x0 0x3 0x0 /* ENET1_RXD0_SER1_RXD0 */
155 0x0 0x7 0x2 0x0 0x1 0x0 /* ENET1_RXD1_SER1_RXD1 */
156 0x0 0x8 0x2 0x0 0x2 0x0 /* ENET1_RXD2_SER1_RXD2 */
157 0x0 0x9 0x2 0x0 0x2 0x0 /* ENET1_RXD3_SER1_RXD3 */
158 0x0 0x4 0x1 0x0 0x2 0x0 /* ENET1_TX_EN_SER1_RTS_B */
159 0x0 0xc 0x2 0x0 0x3 0x0 /* ENET1_RX_DV_SER1_CTS_B */
160 0x2 0x8 0x2 0x0 0x1 0x0 /* ENET1_GRXCLK */
161 0x2 0x14 0x1 0x0 0x2 0x0>; /* ENET1_GTXCLK */
166 /* port pin dir open_drain assignment has_irq */
167 0x2 0x1f 0x1 0x0 0x1 0x0 /* QE_MUX_MDC */
168 0x2 0x1e 0x3 0x0 0x2 0x0 /* QE_MUX_MDIO */
169 0x2 0x10 0x2 0x0 0x3 0x0 /* CLK17 */
170 0x0 0xe 0x1 0x0 0x2 0x0 /* ENET2_TXD0_SER2_TXD0 */
171 0x0 0xf 0x1 0x0 0x2 0x0 /* ENET2_TXD1_SER2_TXD1 */
172 0x0 0x10 0x1 0x0 0x1 0x0 /* ENET2_TXD2_SER2_TXD2 */
173 0x0 0x11 0x1 0x0 0x1 0x0 /* ENET2_TXD3_SER2_TXD3 */
174 0x0 0x14 0x2 0x0 0x2 0x0 /* ENET2_RXD0_SER2_RXD0 */
175 0x0 0x15 0x2 0x0 0x1 0x0 /* ENET2_RXD1_SER2_RXD1 */
176 0x0 0x16 0x2 0x0 0x1 0x0 /* ENET2_RXD2_SER2_RXD2 */
177 0x0 0x17 0x2 0x0 0x1 0x0 /* ENET2_RXD3_SER2_RXD3 */
178 0x0 0x12 0x1 0x0 0x2 0x0 /* ENET2_TX_EN_SER2_RTS_B */
179 0x0 0x1a 0x2 0x0 0x3 0x0 /* ENET2_RX_DV_SER2_CTS_B */
180 0x2 0x3 0x2 0x0 0x1 0x0 /* ENET2_GRXCLK */
181 0x2 0x2 0x1 0x0 0x2 0x0>; /* ENET2_GTXCLK */
186 /* port pin dir open_drain assignment has_irq */
187 0x2 0x1f 0x1 0x0 0x1 0x0 /* QE_MUX_MDC */
188 0x2 0x1e 0x3 0x0 0x2 0x0 /* QE_MUX_MDIO */
189 0x2 0x0b 0x2 0x0 0x1 0x0 /* CLK12*/
190 0x0 0x1d 0x1 0x0 0x2 0x0 /* ENET3_TXD0_SER3_TXD0 */
191 0x0 0x1e 0x1 0x0 0x3 0x0 /* ENET3_TXD1_SER3_TXD1 */
192 0x0 0x1f 0x1 0x0 0x2 0x0 /* ENET3_TXD2_SER3_TXD2 */
193 0x1 0x0 0x1 0x0 0x3 0x0 /* ENET3_TXD3_SER3_TXD3 */
194 0x1 0x3 0x2 0x0 0x3 0x0 /* ENET3_RXD0_SER3_RXD0 */
195 0x1 0x4 0x2 0x0 0x1 0x0 /* ENET3_RXD1_SER3_RXD1 */
196 0x1 0x5 0x2 0x0 0x2 0x0 /* ENET3_RXD2_SER3_RXD2 */
197 0x1 0x6 0x2 0x0 0x3 0x0 /* ENET3_RXD3_SER3_RXD3 */
198 0x1 0x1 0x1 0x0 0x1 0x0 /* ENET3_TX_EN_SER3_RTS_B */
199 0x1 0x9 0x2 0x0 0x3 0x0 /* ENET3_RX_DV_SER3_CTS_B */
200 0x2 0x9 0x2 0x0 0x2 0x0 /* ENET3_GRXCLK */
201 0x2 0x19 0x1 0x0 0x2 0x0>; /* ENET3_GTXCLK */
206 /* port pin dir open_drain assignment has_irq */
207 0x2 0x1f 0x1 0x0 0x1 0x0 /* QE_MUX_MDC */
208 0x2 0x1e 0x3 0x0 0x2 0x0 /* QE_MUX_MDIO */
209 0x2 0x10 0x2 0x0 0x3 0x0 /* CLK17 */
210 0x1 0xc 0x1 0x0 0x2 0x0 /* ENET4_TXD0_SER4_TXD0 */
211 0x1 0xd 0x1 0x0 0x2 0x0 /* ENET4_TXD1_SER4_TXD1 */
212 0x1 0xe 0x1 0x0 0x1 0x0 /* ENET4_TXD2_SER4_TXD2 */
213 0x1 0xf 0x1 0x0 0x2 0x0 /* ENET4_TXD3_SER4_TXD3 */
214 0x1 0x12 0x2 0x0 0x2 0x0 /* ENET4_RXD0_SER4_RXD0 */
215 0x1 0x13 0x2 0x0 0x1 0x0 /* ENET4_RXD1_SER4_RXD1 */
216 0x1 0x14 0x2 0x0 0x1 0x0 /* ENET4_RXD2_SER4_RXD2 */
217 0x1 0x15 0x2 0x0 0x2 0x0 /* ENET4_RXD3_SER4_RXD3 */
218 0x1 0x10 0x1 0x0 0x2 0x0 /* ENET4_TX_EN_SER4_RTS_B */
219 0x1 0x18 0x2 0x0 0x3 0x0 /* ENET4_RX_DV_SER4_CTS_B */
220 0x2 0x11 0x2 0x0 0x2 0x0 /* ENET4_GRXCLK */
221 0x2 0x18 0x1 0x0 0x2 0x0>; /* ENET4_GTXCLK */
227 ranges = <0x0 0x0 0xe0080000 0x40000>;
228 reg = <0x0 0xe0080000 0x0 0x480>;
231 gpios = <&qe_pio_e 30 0>;
235 compatible = "stm,m25p40";
237 spi-max-frequency = <25000000>;
246 fsl,fullspeed-clock = "clk5";
247 fsl,lowspeed-clock = "brg10";
248 gpios = <&qe_pio_f 3 0 /* USBOE */
249 &qe_pio_f 4 0 /* USBTP */
250 &qe_pio_f 5 0 /* USBTN */
251 &qe_pio_f 6 0 /* USBRP */
252 &qe_pio_f 8 0 /* USBRN */
253 &bcsr17 1 0 /* SPEED */
254 &bcsr17 2 0>; /* POWER */
258 device_type = "network";
259 compatible = "ucc_geth";
260 local-mac-address = [ 00 00 00 00 00 00 ];
261 rx-clock-name = "none";
262 tx-clock-name = "clk12";
263 pio-handle = <&pio1>;
264 tbi-handle = <&tbi1>;
265 phy-handle = <&qe_phy0>;
266 phy-connection-type = "rgmii-id";
270 #address-cells = <1>;
273 compatible = "fsl,ucc-mdio";
275 qe_phy0: ethernet-phy@07 {
276 interrupt-parent = <&mpic>;
277 interrupts = <1 1 0 0>;
280 qe_phy1: ethernet-phy@01 {
281 interrupt-parent = <&mpic>;
282 interrupts = <2 1 0 0>;
285 qe_phy2: ethernet-phy@02 {
286 interrupt-parent = <&mpic>;
287 interrupts = <3 1 0 0>;
290 qe_phy3: ethernet-phy@03 {
291 interrupt-parent = <&mpic>;
292 interrupts = <4 1 0 0>;
295 qe_phy5: ethernet-phy@04 {
298 qe_phy7: ethernet-phy@06 {
303 device_type = "tbi-phy";
307 #address-cells = <1>;
310 compatible = "fsl,ucc-mdio";
314 device_type = "tbi-phy";
318 #address-cells = <1>;
321 compatible = "fsl,ucc-mdio";
324 device_type = "tbi-phy";
329 device_type = "network";
330 compatible = "ucc_geth";
331 local-mac-address = [ 00 00 00 00 00 00 ];
332 rx-clock-name = "none";
333 tx-clock-name = "clk12";
334 pio-handle = <&pio3>;
335 tbi-handle = <&tbi3>;
336 phy-handle = <&qe_phy2>;
337 phy-connection-type = "rgmii-id";
341 #address-cells = <1>;
344 compatible = "fsl,ucc-mdio";
347 device_type = "tbi-phy";
352 device_type = "network";
353 compatible = "ucc_geth";
354 local-mac-address = [ 00 00 00 00 00 00 ];
355 rx-clock-name = "none";
356 tx-clock-name = "clk17";
357 pio-handle = <&pio2>;
358 tbi-handle = <&tbi2>;
359 phy-handle = <&qe_phy1>;
360 phy-connection-type = "rgmii-id";
364 #address-cells = <1>;
367 compatible = "fsl,ucc-mdio";
370 device_type = "tbi-phy";
375 device_type = "network";
376 compatible = "ucc_geth";
377 local-mac-address = [ 00 00 00 00 00 00 ];
378 rx-clock-name = "none";
379 tx-clock-name = "clk17";
380 pio-handle = <&pio4>;
381 tbi-handle = <&tbi4>;
382 phy-handle = <&qe_phy3>;
383 phy-connection-type = "rgmii-id";
387 #address-cells = <1>;
390 compatible = "fsl,ucc-mdio";
393 device_type = "tbi-phy";
398 device_type = "network";
399 compatible = "ucc_geth";
400 local-mac-address = [ 00 00 00 00 00 00 ];
401 rx-clock-name = "none";
402 tx-clock-name = "none";
403 tbi-handle = <&tbi6>;
404 phy-handle = <&qe_phy5>;
405 phy-connection-type = "sgmii";
409 device_type = "network";
410 compatible = "ucc_geth";
411 local-mac-address = [ 00 00 00 00 00 00 ];
412 rx-clock-name = "none";
413 tx-clock-name = "none";
414 tbi-handle = <&tbi8>;
415 phy-handle = <&qe_phy7>;
416 phy-connection-type = "sgmii";
421 pci1: pcie@e000a000 {
422 reg = <0x0 0xe000a000 0x0 0x1000>;
423 ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x10000000
424 0x1000000 0x0 0x00000000 0 0xe2800000 0x0 0x00800000>;
426 ranges = <0x2000000 0x0 0xa0000000
427 0x2000000 0x0 0xa0000000
436 rio: rapidio@e00c00000 {
437 reg = <0x0 0xe00c0000 0x0 0x20000>;
439 ranges = <0x0 0x0 0x0 0xc0000000 0x0 0x20000000>;
447 /include/ "fsl/mpc8569si-post.dtsi"