1 #include <linux/init.h>
3 #include <asm/x86_init.h>
5 #include <asm/xen/hypercall.h>
8 #include <xen/interface/physdev.h>
12 static unsigned int xen_io_apic_read(unsigned apic
, unsigned reg
)
14 struct physdev_apic apic_op
;
17 apic_op
.apic_physbase
= mpc_ioapic_addr(apic
);
19 ret
= HYPERVISOR_physdev_op(PHYSDEVOP_apic_read
, &apic_op
);
23 /* fallback to return an emulated IO_APIC values */
32 static unsigned long xen_set_apic_id(unsigned int x
)
38 static unsigned int xen_get_apic_id(unsigned long x
)
40 return ((x
)>>24) & 0xFFu
;
43 static u32
xen_apic_read(u32 reg
)
45 struct xen_platform_op op
= {
46 .cmd
= XENPF_get_cpuinfo
,
47 .interface_version
= XENPF_INTERFACE_VERSION
,
48 .u
.pcpu_info
.xen_cpuid
= 0,
52 /* Shouldn't need this as APIC is turned off for PV, and we only
53 * get called on the bootup processor. But just in case. */
54 if (!xen_initial_domain() || smp_processor_id())
61 return SET_APIC_LOGICAL_ID(1UL << smp_processor_id());
66 ret
= HYPERVISOR_dom0_op(&op
);
70 return op
.u
.pcpu_info
.apic_id
<< 24;
73 static void xen_apic_write(u32 reg
, u32 val
)
75 /* Warn to see if there's any stray references */
76 WARN(1,"register: %x, value: %x\n", reg
, val
);
79 static u64
xen_apic_icr_read(void)
84 static void xen_apic_icr_write(u32 low
, u32 id
)
86 /* Warn to see if there's any stray references */
90 static u32
xen_safe_apic_wait_icr_idle(void)
95 static int xen_apic_probe_pv(void)
103 static int xen_madt_oem_check(char *oem_id
, char *oem_table_id
)
105 return xen_pv_domain();
108 static int xen_id_always_valid(int apicid
)
113 static int xen_id_always_registered(void)
118 static int xen_phys_pkg_id(int initial_apic_id
, int index_msb
)
120 return initial_apic_id
>> index_msb
;
124 static int xen_x86_32_early_logical_apicid(int cpu
)
126 /* Match with APIC_LDR read. Otherwise setup_local_APIC complains. */
131 static void xen_noop(void)
135 static void xen_silent_inquire(int apicid
)
139 static struct apic xen_pv_apic
= {
141 .probe
= xen_apic_probe_pv
,
142 .acpi_madt_oem_check
= xen_madt_oem_check
,
143 .apic_id_valid
= xen_id_always_valid
,
144 .apic_id_registered
= xen_id_always_registered
,
146 /* .irq_delivery_mode - used in native_compose_msi_msg only */
147 /* .irq_dest_mode - used in native_compose_msi_msg only */
149 .target_cpus
= default_target_cpus
,
151 /* .dest_logical - default_send_IPI_ use it but we use our own. */
152 .check_apicid_used
= default_check_apicid_used
, /* Used on 32-bit */
154 .vector_allocation_domain
= flat_vector_allocation_domain
,
155 .init_apic_ldr
= xen_noop
, /* setup_local_APIC calls it */
157 .ioapic_phys_id_map
= default_ioapic_phys_id_map
, /* Used on 32-bit */
158 .setup_apic_routing
= NULL
,
159 .cpu_present_to_apicid
= default_cpu_present_to_apicid
,
160 .apicid_to_cpu_present
= physid_set_mask_of_physid
, /* Used on 32-bit */
161 .check_phys_apicid_present
= default_check_phys_apicid_present
, /* smp_sanity_check needs it */
162 .phys_pkg_id
= xen_phys_pkg_id
, /* detect_ht */
164 .get_apic_id
= xen_get_apic_id
,
165 .set_apic_id
= xen_set_apic_id
, /* Can be NULL on 32-bit. */
166 .apic_id_mask
= 0xFF << 24, /* Used by verify_local_APIC. Match with what xen_get_apic_id does. */
168 .cpu_mask_to_apicid_and
= flat_cpu_mask_to_apicid_and
,
171 .send_IPI_mask
= xen_send_IPI_mask
,
172 .send_IPI_mask_allbutself
= xen_send_IPI_mask_allbutself
,
173 .send_IPI_allbutself
= xen_send_IPI_allbutself
,
174 .send_IPI_all
= xen_send_IPI_all
,
175 .send_IPI_self
= xen_send_IPI_self
,
177 /* .wait_for_init_deassert- used by AP bootup - smp_callin which we don't use */
178 .inquire_remote_apic
= xen_silent_inquire
,
180 .read
= xen_apic_read
,
181 .write
= xen_apic_write
,
182 .eoi_write
= xen_apic_write
,
184 .icr_read
= xen_apic_icr_read
,
185 .icr_write
= xen_apic_icr_write
,
186 .wait_icr_idle
= xen_noop
,
187 .safe_wait_icr_idle
= xen_safe_apic_wait_icr_idle
,
190 /* generic_processor_info and setup_local_APIC. */
191 .x86_32_early_logical_apicid
= xen_x86_32_early_logical_apicid
,
195 static void __init
xen_apic_check(void)
197 if (apic
== &xen_pv_apic
)
200 pr_info("Switched APIC routing from %s to %s.\n", apic
->name
,
204 void __init
xen_init_apic(void)
206 x86_io_apic_ops
.read
= xen_io_apic_read
;
207 /* On PV guests the APIC CPUID bit is disabled so none of the
208 * routines end up executing. */
209 if (!xen_initial_domain())
212 x86_platform
.apic_post_init
= xen_apic_check
;
214 apic_driver(xen_pv_apic
);