2 * drivers/usb/host/ehci-orion.c
4 * Tzachi Perelstein <tzachi@marvell.com>
6 * This file is licensed under the terms of the GNU General Public
7 * License version 2. This program is licensed "as is" without any
8 * warranty of any kind, whether express or implied.
11 #include <linux/kernel.h>
12 #include <linux/module.h>
13 #include <linux/platform_device.h>
14 #include <linux/mbus.h>
15 #include <linux/clk.h>
16 #include <linux/platform_data/usb-ehci-orion.h>
18 #include <linux/of_device.h>
19 #include <linux/of_irq.h>
20 #include <linux/usb.h>
21 #include <linux/usb/hcd.h>
23 #include <linux/dma-mapping.h>
27 #define rdl(off) __raw_readl(hcd->regs + (off))
28 #define wrl(off, val) __raw_writel((val), hcd->regs + (off))
31 #define USB_MODE 0x1a8
32 #define USB_CAUSE 0x310
33 #define USB_MASK 0x314
34 #define USB_WINDOW_CTRL(i) (0x320 + ((i) << 4))
35 #define USB_WINDOW_BASE(i) (0x324 + ((i) << 4))
37 #define USB_PHY_PWR_CTRL 0x400
38 #define USB_PHY_TX_CTRL 0x420
39 #define USB_PHY_RX_CTRL 0x430
40 #define USB_PHY_IVREF_CTRL 0x440
41 #define USB_PHY_TST_GRP_CTRL 0x450
43 #define DRIVER_DESC "EHCI orion driver"
45 static const char hcd_name
[] = "ehci-orion";
47 static struct hc_driver __read_mostly ehci_orion_hc_driver
;
50 * Implement Orion USB controller specification guidelines
52 static void orion_usb_phy_v1_setup(struct usb_hcd
*hcd
)
54 /* The below GLs are according to the Orion Errata document */
56 * Clear interrupt cause and mask
64 wrl(USB_CMD
, rdl(USB_CMD
) | 0x2);
65 while (rdl(USB_CMD
) & 0x2);
68 * GL# USB-10: Set IPG for non start of frame packets
71 wrl(USB_IPG
, (rdl(USB_IPG
) & ~0x7f00) | 0xc00);
74 * GL# USB-9: USB 2.0 Power Control
77 wrl(USB_PHY_PWR_CTRL
, (rdl(USB_PHY_PWR_CTRL
) & ~0xc0)| 0x40);
80 * GL# USB-1: USB PHY Tx Control - force calibration to '8'
81 * TXDATA_BLOCK_EN[21]=0x1, EXT_RCAL_EN[13]=0x1, IMP_CAL[6:3]=0x8
83 wrl(USB_PHY_TX_CTRL
, (rdl(USB_PHY_TX_CTRL
) & ~0x78) | 0x202040);
86 * GL# USB-3 GL# USB-9: USB PHY Rx Control
87 * RXDATA_BLOCK_LENGHT[31:30]=0x3, EDGE_DET_SEL[27:26]=0,
88 * CDR_FASTLOCK_EN[21]=0, DISCON_THRESHOLD[9:8]=0, SQ_THRESH[7:4]=0x1
90 wrl(USB_PHY_RX_CTRL
, (rdl(USB_PHY_RX_CTRL
) & ~0xc2003f0) | 0xc0000010);
93 * GL# USB-3 GL# USB-9: USB PHY IVREF Control
94 * PLLVDD12[1:0]=0x2, RXVDD[5:4]=0x3, Reserved[19]=0
96 wrl(USB_PHY_IVREF_CTRL
, (rdl(USB_PHY_IVREF_CTRL
) & ~0x80003 ) | 0x32);
99 * GL# USB-3 GL# USB-9: USB PHY Test Group Control
100 * REG_FIFO_SQ_RST[15]=0
102 wrl(USB_PHY_TST_GRP_CTRL
, rdl(USB_PHY_TST_GRP_CTRL
) & ~0x8000);
105 * Stop and reset controller
107 wrl(USB_CMD
, rdl(USB_CMD
) & ~0x1);
108 wrl(USB_CMD
, rdl(USB_CMD
) | 0x2);
109 while (rdl(USB_CMD
) & 0x2);
112 * GL# USB-5 Streaming disable REG_USB_MODE[4]=1
113 * TBD: This need to be done after each reset!
114 * GL# USB-4 Setup USB Host mode
120 ehci_orion_conf_mbus_windows(struct usb_hcd
*hcd
,
121 const struct mbus_dram_target_info
*dram
)
125 for (i
= 0; i
< 4; i
++) {
126 wrl(USB_WINDOW_CTRL(i
), 0);
127 wrl(USB_WINDOW_BASE(i
), 0);
130 for (i
= 0; i
< dram
->num_cs
; i
++) {
131 const struct mbus_dram_window
*cs
= dram
->cs
+ i
;
133 wrl(USB_WINDOW_CTRL(i
), ((cs
->size
- 1) & 0xffff0000) |
134 (cs
->mbus_attr
<< 8) |
135 (dram
->mbus_dram_target_id
<< 4) | 1);
136 wrl(USB_WINDOW_BASE(i
), cs
->base
);
140 static int ehci_orion_drv_probe(struct platform_device
*pdev
)
142 struct orion_ehci_data
*pd
= pdev
->dev
.platform_data
;
143 const struct mbus_dram_target_info
*dram
;
144 struct resource
*res
;
146 struct ehci_hcd
*ehci
;
150 enum orion_ehci_phy_ver phy_version
;
155 pr_debug("Initializing Orion-SoC USB Host Controller\n");
157 if (pdev
->dev
.of_node
)
158 irq
= irq_of_parse_and_map(pdev
->dev
.of_node
, 0);
160 irq
= platform_get_irq(pdev
, 0);
163 "Found HC with no IRQ. Check %s setup!\n",
164 dev_name(&pdev
->dev
));
169 res
= platform_get_resource(pdev
, IORESOURCE_MEM
, 0);
172 "Found HC with no register addr. Check %s setup!\n",
173 dev_name(&pdev
->dev
));
179 * Right now device-tree probed devices don't get dma_mask
180 * set. Since shared usb code relies on it, set it here for
181 * now. Once we have dma capability bindings this can go away.
183 if (!pdev
->dev
.dma_mask
)
184 pdev
->dev
.dma_mask
= &pdev
->dev
.coherent_dma_mask
;
185 if (!pdev
->dev
.coherent_dma_mask
)
186 pdev
->dev
.coherent_dma_mask
= DMA_BIT_MASK(32);
188 if (!request_mem_region(res
->start
, resource_size(res
),
189 ehci_orion_hc_driver
.description
)) {
190 dev_dbg(&pdev
->dev
, "controller already in use\n");
195 regs
= ioremap(res
->start
, resource_size(res
));
197 dev_dbg(&pdev
->dev
, "error mapping memory\n");
202 /* Not all platforms can gate the clock, so it is not
203 an error if the clock does not exists. */
204 clk
= clk_get(&pdev
->dev
, NULL
);
206 clk_prepare_enable(clk
);
210 hcd
= usb_create_hcd(&ehci_orion_hc_driver
,
211 &pdev
->dev
, dev_name(&pdev
->dev
));
217 hcd
->rsrc_start
= res
->start
;
218 hcd
->rsrc_len
= resource_size(res
);
221 ehci
= hcd_to_ehci(hcd
);
222 ehci
->caps
= hcd
->regs
+ 0x100;
226 * (Re-)program MBUS remapping windows if we are asked to.
228 dram
= mv_mbus_dram_info();
230 ehci_orion_conf_mbus_windows(hcd
, dram
);
233 * setup Orion USB controller.
235 if (pdev
->dev
.of_node
)
236 phy_version
= EHCI_PHY_NA
;
238 phy_version
= pd
->phy_version
;
240 switch (phy_version
) {
241 case EHCI_PHY_NA
: /* dont change USB phy settings */
244 orion_usb_phy_v1_setup(hcd
);
249 printk(KERN_WARNING
"Orion ehci -USB phy version isn't supported.\n");
252 err
= usb_add_hcd(hcd
, irq
, IRQF_SHARED
);
262 clk_disable_unprepare(clk
);
267 release_mem_region(res
->start
, resource_size(res
));
269 dev_err(&pdev
->dev
, "init %s fail, %d\n",
270 dev_name(&pdev
->dev
), err
);
275 static int ehci_orion_drv_remove(struct platform_device
*pdev
)
277 struct usb_hcd
*hcd
= platform_get_drvdata(pdev
);
282 release_mem_region(hcd
->rsrc_start
, hcd
->rsrc_len
);
285 clk
= clk_get(&pdev
->dev
, NULL
);
287 clk_disable_unprepare(clk
);
293 static const struct of_device_id ehci_orion_dt_ids
[] = {
294 { .compatible
= "marvell,orion-ehci", },
297 MODULE_DEVICE_TABLE(of
, ehci_orion_dt_ids
);
299 static struct platform_driver ehci_orion_driver
= {
300 .probe
= ehci_orion_drv_probe
,
301 .remove
= ehci_orion_drv_remove
,
302 .shutdown
= usb_hcd_platform_shutdown
,
304 .name
= "orion-ehci",
305 .owner
= THIS_MODULE
,
306 .of_match_table
= ehci_orion_dt_ids
,
310 static int __init
ehci_orion_init(void)
315 pr_info("%s: " DRIVER_DESC
"\n", hcd_name
);
317 ehci_init_driver(&ehci_orion_hc_driver
, NULL
);
318 return platform_driver_register(&ehci_orion_driver
);
320 module_init(ehci_orion_init
);
322 static void __exit
ehci_orion_cleanup(void)
324 platform_driver_unregister(&ehci_orion_driver
);
326 module_exit(ehci_orion_cleanup
);
328 MODULE_DESCRIPTION(DRIVER_DESC
);
329 MODULE_ALIAS("platform:orion-ehci");
330 MODULE_AUTHOR("Tzachi Perelstein");
331 MODULE_LICENSE("GPL v2");