2 * Intel IO-APIC support for multi-Pentium hosts.
4 * Copyright (C) 1997, 1998, 1999, 2000, 2009 Ingo Molnar, Hajnalka Szabo
6 * Many thanks to Stig Venaas for trying out countless experimental
7 * patches and reporting/debugging problems patiently!
9 * (c) 1999, Multiple IO-APIC support, developed by
10 * Ken-ichi Yaku <yaku@css1.kbnes.nec.co.jp> and
11 * Hidemi Kishimoto <kisimoto@css1.kbnes.nec.co.jp>,
12 * further tested and cleaned up by Zach Brown <zab@redhat.com>
13 * and Ingo Molnar <mingo@redhat.com>
16 * Maciej W. Rozycki : Bits for genuine 82489DX APICs;
17 * thanks to Eric Gilmore
19 * for testing these extensively
20 * Paul Diefenbaugh : Added full ACPI support
24 #include <linux/interrupt.h>
25 #include <linux/init.h>
26 #include <linux/delay.h>
27 #include <linux/sched.h>
28 #include <linux/pci.h>
29 #include <linux/mc146818rtc.h>
30 #include <linux/compiler.h>
31 #include <linux/acpi.h>
32 #include <linux/module.h>
33 #include <linux/sysdev.h>
34 #include <linux/msi.h>
35 #include <linux/htirq.h>
36 #include <linux/freezer.h>
37 #include <linux/kthread.h>
38 #include <linux/jiffies.h> /* time_after() */
40 #include <acpi/acpi_bus.h>
42 #include <linux/bootmem.h>
43 #include <linux/dmar.h>
44 #include <linux/hpet.h>
51 #include <asm/proto.h>
54 #include <asm/timer.h>
55 #include <asm/i8259.h>
57 #include <asm/msidef.h>
58 #include <asm/hypertransport.h>
59 #include <asm/setup.h>
60 #include <asm/irq_remapping.h>
62 #include <asm/hw_irq.h>
63 #include <asm/uv/uv_hub.h>
64 #include <asm/uv/uv_irq.h>
68 #define __apicdebuginit(type) static type __init
69 #define for_each_irq_pin(entry, head) \
70 for (entry = head; entry; entry = entry->next)
73 * Is the SiS APIC rmw bug present ?
74 * -1 = don't know, 0 = no, 1 = yes
76 int sis_apic_bug
= -1;
78 static DEFINE_SPINLOCK(ioapic_lock
);
79 static DEFINE_SPINLOCK(vector_lock
);
82 * # of IRQ routing registers
84 int nr_ioapic_registers
[MAX_IO_APICS
];
86 /* I/O APIC entries */
87 struct mpc_ioapic mp_ioapics
[MAX_IO_APICS
];
90 /* IO APIC gsi routing info */
91 struct mp_ioapic_gsi mp_gsi_routing
[MAX_IO_APICS
];
93 /* MP IRQ source entries */
94 struct mpc_intsrc mp_irqs
[MAX_IRQ_SOURCES
];
96 /* # of MP IRQ source entries */
99 #if defined (CONFIG_MCA) || defined (CONFIG_EISA)
100 int mp_bus_id_to_type
[MAX_MP_BUSSES
];
103 DECLARE_BITMAP(mp_bus_not_pci
, MAX_MP_BUSSES
);
105 int skip_ioapic_setup
;
107 void arch_disable_smp_support(void)
111 noioapicreroute
= -1;
113 skip_ioapic_setup
= 1;
116 static int __init
parse_noapic(char *str
)
118 /* disable IO-APIC */
119 arch_disable_smp_support();
122 early_param("noapic", parse_noapic
);
124 struct irq_pin_list
{
126 struct irq_pin_list
*next
;
129 static struct irq_pin_list
*get_one_free_irq_2_pin(int node
)
131 struct irq_pin_list
*pin
;
133 pin
= kzalloc_node(sizeof(*pin
), GFP_ATOMIC
, node
);
139 * This is performance-critical, we want to do it O(1)
141 * Most irqs are mapped 1:1 with pins.
144 struct irq_pin_list
*irq_2_pin
;
145 cpumask_var_t domain
;
146 cpumask_var_t old_domain
;
147 unsigned move_cleanup_count
;
149 u8 move_in_progress
: 1;
152 /* irq_cfg is indexed by the sum of all RTEs in all I/O APICs. */
153 #ifdef CONFIG_SPARSE_IRQ
154 static struct irq_cfg irq_cfgx
[] = {
156 static struct irq_cfg irq_cfgx
[NR_IRQS
] = {
158 [0] = { .vector
= IRQ0_VECTOR
, },
159 [1] = { .vector
= IRQ1_VECTOR
, },
160 [2] = { .vector
= IRQ2_VECTOR
, },
161 [3] = { .vector
= IRQ3_VECTOR
, },
162 [4] = { .vector
= IRQ4_VECTOR
, },
163 [5] = { .vector
= IRQ5_VECTOR
, },
164 [6] = { .vector
= IRQ6_VECTOR
, },
165 [7] = { .vector
= IRQ7_VECTOR
, },
166 [8] = { .vector
= IRQ8_VECTOR
, },
167 [9] = { .vector
= IRQ9_VECTOR
, },
168 [10] = { .vector
= IRQ10_VECTOR
, },
169 [11] = { .vector
= IRQ11_VECTOR
, },
170 [12] = { .vector
= IRQ12_VECTOR
, },
171 [13] = { .vector
= IRQ13_VECTOR
, },
172 [14] = { .vector
= IRQ14_VECTOR
, },
173 [15] = { .vector
= IRQ15_VECTOR
, },
176 int __init
arch_early_irq_init(void)
179 struct irq_desc
*desc
;
185 count
= ARRAY_SIZE(irq_cfgx
);
186 node
= cpu_to_node(boot_cpu_id
);
188 for (i
= 0; i
< count
; i
++) {
189 desc
= irq_to_desc(i
);
190 desc
->chip_data
= &cfg
[i
];
191 zalloc_cpumask_var_node(&cfg
[i
].domain
, GFP_NOWAIT
, node
);
192 zalloc_cpumask_var_node(&cfg
[i
].old_domain
, GFP_NOWAIT
, node
);
193 if (i
< NR_IRQS_LEGACY
)
194 cpumask_setall(cfg
[i
].domain
);
200 #ifdef CONFIG_SPARSE_IRQ
201 static struct irq_cfg
*irq_cfg(unsigned int irq
)
203 struct irq_cfg
*cfg
= NULL
;
204 struct irq_desc
*desc
;
206 desc
= irq_to_desc(irq
);
208 cfg
= desc
->chip_data
;
213 static struct irq_cfg
*get_one_free_irq_cfg(int node
)
217 cfg
= kzalloc_node(sizeof(*cfg
), GFP_ATOMIC
, node
);
219 if (!alloc_cpumask_var_node(&cfg
->domain
, GFP_ATOMIC
, node
)) {
222 } else if (!alloc_cpumask_var_node(&cfg
->old_domain
,
224 free_cpumask_var(cfg
->domain
);
228 cpumask_clear(cfg
->domain
);
229 cpumask_clear(cfg
->old_domain
);
236 int arch_init_chip_data(struct irq_desc
*desc
, int node
)
240 cfg
= desc
->chip_data
;
242 desc
->chip_data
= get_one_free_irq_cfg(node
);
243 if (!desc
->chip_data
) {
244 printk(KERN_ERR
"can not alloc irq_cfg\n");
252 /* for move_irq_desc */
254 init_copy_irq_2_pin(struct irq_cfg
*old_cfg
, struct irq_cfg
*cfg
, int node
)
256 struct irq_pin_list
*old_entry
, *head
, *tail
, *entry
;
258 cfg
->irq_2_pin
= NULL
;
259 old_entry
= old_cfg
->irq_2_pin
;
263 entry
= get_one_free_irq_2_pin(node
);
267 entry
->apic
= old_entry
->apic
;
268 entry
->pin
= old_entry
->pin
;
271 old_entry
= old_entry
->next
;
273 entry
= get_one_free_irq_2_pin(node
);
281 /* still use the old one */
284 entry
->apic
= old_entry
->apic
;
285 entry
->pin
= old_entry
->pin
;
288 old_entry
= old_entry
->next
;
292 cfg
->irq_2_pin
= head
;
295 static void free_irq_2_pin(struct irq_cfg
*old_cfg
, struct irq_cfg
*cfg
)
297 struct irq_pin_list
*entry
, *next
;
299 if (old_cfg
->irq_2_pin
== cfg
->irq_2_pin
)
302 entry
= old_cfg
->irq_2_pin
;
309 old_cfg
->irq_2_pin
= NULL
;
312 void arch_init_copy_chip_data(struct irq_desc
*old_desc
,
313 struct irq_desc
*desc
, int node
)
316 struct irq_cfg
*old_cfg
;
318 cfg
= get_one_free_irq_cfg(node
);
323 desc
->chip_data
= cfg
;
325 old_cfg
= old_desc
->chip_data
;
327 memcpy(cfg
, old_cfg
, sizeof(struct irq_cfg
));
329 init_copy_irq_2_pin(old_cfg
, cfg
, node
);
332 static void free_irq_cfg(struct irq_cfg
*old_cfg
)
337 void arch_free_chip_data(struct irq_desc
*old_desc
, struct irq_desc
*desc
)
339 struct irq_cfg
*old_cfg
, *cfg
;
341 old_cfg
= old_desc
->chip_data
;
342 cfg
= desc
->chip_data
;
348 free_irq_2_pin(old_cfg
, cfg
);
349 free_irq_cfg(old_cfg
);
350 old_desc
->chip_data
= NULL
;
353 /* end for move_irq_desc */
356 static struct irq_cfg
*irq_cfg(unsigned int irq
)
358 return irq
< nr_irqs
? irq_cfgx
+ irq
: NULL
;
365 unsigned int unused
[3];
367 unsigned int unused2
[11];
371 static __attribute_const__
struct io_apic __iomem
*io_apic_base(int idx
)
373 return (void __iomem
*) __fix_to_virt(FIX_IO_APIC_BASE_0
+ idx
)
374 + (mp_ioapics
[idx
].apicaddr
& ~PAGE_MASK
);
377 static inline void io_apic_eoi(unsigned int apic
, unsigned int vector
)
379 struct io_apic __iomem
*io_apic
= io_apic_base(apic
);
380 writel(vector
, &io_apic
->eoi
);
383 static inline unsigned int io_apic_read(unsigned int apic
, unsigned int reg
)
385 struct io_apic __iomem
*io_apic
= io_apic_base(apic
);
386 writel(reg
, &io_apic
->index
);
387 return readl(&io_apic
->data
);
390 static inline void io_apic_write(unsigned int apic
, unsigned int reg
, unsigned int value
)
392 struct io_apic __iomem
*io_apic
= io_apic_base(apic
);
393 writel(reg
, &io_apic
->index
);
394 writel(value
, &io_apic
->data
);
398 * Re-write a value: to be used for read-modify-write
399 * cycles where the read already set up the index register.
401 * Older SiS APIC requires we rewrite the index register
403 static inline void io_apic_modify(unsigned int apic
, unsigned int reg
, unsigned int value
)
405 struct io_apic __iomem
*io_apic
= io_apic_base(apic
);
408 writel(reg
, &io_apic
->index
);
409 writel(value
, &io_apic
->data
);
412 static bool io_apic_level_ack_pending(struct irq_cfg
*cfg
)
414 struct irq_pin_list
*entry
;
417 spin_lock_irqsave(&ioapic_lock
, flags
);
418 for_each_irq_pin(entry
, cfg
->irq_2_pin
) {
423 reg
= io_apic_read(entry
->apic
, 0x10 + pin
*2);
424 /* Is the remote IRR bit set? */
425 if (reg
& IO_APIC_REDIR_REMOTE_IRR
) {
426 spin_unlock_irqrestore(&ioapic_lock
, flags
);
430 spin_unlock_irqrestore(&ioapic_lock
, flags
);
436 struct { u32 w1
, w2
; };
437 struct IO_APIC_route_entry entry
;
440 static struct IO_APIC_route_entry
ioapic_read_entry(int apic
, int pin
)
442 union entry_union eu
;
444 spin_lock_irqsave(&ioapic_lock
, flags
);
445 eu
.w1
= io_apic_read(apic
, 0x10 + 2 * pin
);
446 eu
.w2
= io_apic_read(apic
, 0x11 + 2 * pin
);
447 spin_unlock_irqrestore(&ioapic_lock
, flags
);
452 * When we write a new IO APIC routing entry, we need to write the high
453 * word first! If the mask bit in the low word is clear, we will enable
454 * the interrupt, and we need to make sure the entry is fully populated
455 * before that happens.
458 __ioapic_write_entry(int apic
, int pin
, struct IO_APIC_route_entry e
)
460 union entry_union eu
= {{0, 0}};
463 io_apic_write(apic
, 0x11 + 2*pin
, eu
.w2
);
464 io_apic_write(apic
, 0x10 + 2*pin
, eu
.w1
);
467 void ioapic_write_entry(int apic
, int pin
, struct IO_APIC_route_entry e
)
470 spin_lock_irqsave(&ioapic_lock
, flags
);
471 __ioapic_write_entry(apic
, pin
, e
);
472 spin_unlock_irqrestore(&ioapic_lock
, flags
);
476 * When we mask an IO APIC routing entry, we need to write the low
477 * word first, in order to set the mask bit before we change the
480 static void ioapic_mask_entry(int apic
, int pin
)
483 union entry_union eu
= { .entry
.mask
= 1 };
485 spin_lock_irqsave(&ioapic_lock
, flags
);
486 io_apic_write(apic
, 0x10 + 2*pin
, eu
.w1
);
487 io_apic_write(apic
, 0x11 + 2*pin
, eu
.w2
);
488 spin_unlock_irqrestore(&ioapic_lock
, flags
);
492 * The common case is 1:1 IRQ<->pin mappings. Sometimes there are
493 * shared ISA-space IRQs, so we have to support them. We are super
494 * fast in the common case, and fast for shared ISA-space IRQs.
497 add_pin_to_irq_node_nopanic(struct irq_cfg
*cfg
, int node
, int apic
, int pin
)
499 struct irq_pin_list
**last
, *entry
;
501 /* don't allow duplicates */
502 last
= &cfg
->irq_2_pin
;
503 for_each_irq_pin(entry
, cfg
->irq_2_pin
) {
504 if (entry
->apic
== apic
&& entry
->pin
== pin
)
509 entry
= get_one_free_irq_2_pin(node
);
511 printk(KERN_ERR
"can not alloc irq_pin_list (%d,%d,%d)\n",
522 static void add_pin_to_irq_node(struct irq_cfg
*cfg
, int node
, int apic
, int pin
)
524 if (add_pin_to_irq_node_nopanic(cfg
, node
, apic
, pin
))
525 panic("IO-APIC: failed to add irq-pin. Can not proceed\n");
529 * Reroute an IRQ to a different pin.
531 static void __init
replace_pin_at_irq_node(struct irq_cfg
*cfg
, int node
,
532 int oldapic
, int oldpin
,
533 int newapic
, int newpin
)
535 struct irq_pin_list
*entry
;
537 for_each_irq_pin(entry
, cfg
->irq_2_pin
) {
538 if (entry
->apic
== oldapic
&& entry
->pin
== oldpin
) {
539 entry
->apic
= newapic
;
541 /* every one is different, right? */
546 /* old apic/pin didn't exist, so just add new ones */
547 add_pin_to_irq_node(cfg
, node
, newapic
, newpin
);
550 static void io_apic_modify_irq(struct irq_cfg
*cfg
,
551 int mask_and
, int mask_or
,
552 void (*final
)(struct irq_pin_list
*entry
))
555 struct irq_pin_list
*entry
;
557 for_each_irq_pin(entry
, cfg
->irq_2_pin
) {
560 reg
= io_apic_read(entry
->apic
, 0x10 + pin
* 2);
563 io_apic_modify(entry
->apic
, 0x10 + pin
* 2, reg
);
569 static void __unmask_IO_APIC_irq(struct irq_cfg
*cfg
)
571 io_apic_modify_irq(cfg
, ~IO_APIC_REDIR_MASKED
, 0, NULL
);
574 static void io_apic_sync(struct irq_pin_list
*entry
)
577 * Synchronize the IO-APIC and the CPU by doing
578 * a dummy read from the IO-APIC
580 struct io_apic __iomem
*io_apic
;
581 io_apic
= io_apic_base(entry
->apic
);
582 readl(&io_apic
->data
);
585 static void __mask_IO_APIC_irq(struct irq_cfg
*cfg
)
587 io_apic_modify_irq(cfg
, ~0, IO_APIC_REDIR_MASKED
, &io_apic_sync
);
590 static void __mask_and_edge_IO_APIC_irq(struct irq_cfg
*cfg
)
592 io_apic_modify_irq(cfg
, ~IO_APIC_REDIR_LEVEL_TRIGGER
,
593 IO_APIC_REDIR_MASKED
, NULL
);
596 static void __unmask_and_level_IO_APIC_irq(struct irq_cfg
*cfg
)
598 io_apic_modify_irq(cfg
, ~IO_APIC_REDIR_MASKED
,
599 IO_APIC_REDIR_LEVEL_TRIGGER
, NULL
);
602 static void mask_IO_APIC_irq_desc(struct irq_desc
*desc
)
604 struct irq_cfg
*cfg
= desc
->chip_data
;
609 spin_lock_irqsave(&ioapic_lock
, flags
);
610 __mask_IO_APIC_irq(cfg
);
611 spin_unlock_irqrestore(&ioapic_lock
, flags
);
614 static void unmask_IO_APIC_irq_desc(struct irq_desc
*desc
)
616 struct irq_cfg
*cfg
= desc
->chip_data
;
619 spin_lock_irqsave(&ioapic_lock
, flags
);
620 __unmask_IO_APIC_irq(cfg
);
621 spin_unlock_irqrestore(&ioapic_lock
, flags
);
624 static void mask_IO_APIC_irq(unsigned int irq
)
626 struct irq_desc
*desc
= irq_to_desc(irq
);
628 mask_IO_APIC_irq_desc(desc
);
630 static void unmask_IO_APIC_irq(unsigned int irq
)
632 struct irq_desc
*desc
= irq_to_desc(irq
);
634 unmask_IO_APIC_irq_desc(desc
);
637 static void clear_IO_APIC_pin(unsigned int apic
, unsigned int pin
)
639 struct IO_APIC_route_entry entry
;
641 /* Check delivery_mode to be sure we're not clearing an SMI pin */
642 entry
= ioapic_read_entry(apic
, pin
);
643 if (entry
.delivery_mode
== dest_SMI
)
646 * Disable it in the IO-APIC irq-routing table:
648 ioapic_mask_entry(apic
, pin
);
651 static void clear_IO_APIC (void)
655 for (apic
= 0; apic
< nr_ioapics
; apic
++)
656 for (pin
= 0; pin
< nr_ioapic_registers
[apic
]; pin
++)
657 clear_IO_APIC_pin(apic
, pin
);
662 * support for broken MP BIOSs, enables hand-redirection of PIRQ0-7 to
663 * specific CPU-side IRQs.
667 static int pirq_entries
[MAX_PIRQS
] = {
668 [0 ... MAX_PIRQS
- 1] = -1
671 static int __init
ioapic_pirq_setup(char *str
)
674 int ints
[MAX_PIRQS
+1];
676 get_options(str
, ARRAY_SIZE(ints
), ints
);
678 apic_printk(APIC_VERBOSE
, KERN_INFO
679 "PIRQ redirection, working around broken MP-BIOS.\n");
681 if (ints
[0] < MAX_PIRQS
)
684 for (i
= 0; i
< max
; i
++) {
685 apic_printk(APIC_VERBOSE
, KERN_DEBUG
686 "... PIRQ%d -> IRQ %d\n", i
, ints
[i
+1]);
688 * PIRQs are mapped upside down, usually.
690 pirq_entries
[MAX_PIRQS
-i
-1] = ints
[i
+1];
695 __setup("pirq=", ioapic_pirq_setup
);
696 #endif /* CONFIG_X86_32 */
698 struct IO_APIC_route_entry
**alloc_ioapic_entries(void)
701 struct IO_APIC_route_entry
**ioapic_entries
;
703 ioapic_entries
= kzalloc(sizeof(*ioapic_entries
) * nr_ioapics
,
708 for (apic
= 0; apic
< nr_ioapics
; apic
++) {
709 ioapic_entries
[apic
] =
710 kzalloc(sizeof(struct IO_APIC_route_entry
) *
711 nr_ioapic_registers
[apic
], GFP_ATOMIC
);
712 if (!ioapic_entries
[apic
])
716 return ioapic_entries
;
720 kfree(ioapic_entries
[apic
]);
721 kfree(ioapic_entries
);
727 * Saves all the IO-APIC RTE's
729 int save_IO_APIC_setup(struct IO_APIC_route_entry
**ioapic_entries
)
736 for (apic
= 0; apic
< nr_ioapics
; apic
++) {
737 if (!ioapic_entries
[apic
])
740 for (pin
= 0; pin
< nr_ioapic_registers
[apic
]; pin
++)
741 ioapic_entries
[apic
][pin
] =
742 ioapic_read_entry(apic
, pin
);
749 * Mask all IO APIC entries.
751 void mask_IO_APIC_setup(struct IO_APIC_route_entry
**ioapic_entries
)
758 for (apic
= 0; apic
< nr_ioapics
; apic
++) {
759 if (!ioapic_entries
[apic
])
762 for (pin
= 0; pin
< nr_ioapic_registers
[apic
]; pin
++) {
763 struct IO_APIC_route_entry entry
;
765 entry
= ioapic_entries
[apic
][pin
];
768 ioapic_write_entry(apic
, pin
, entry
);
775 * Restore IO APIC entries which was saved in ioapic_entries.
777 int restore_IO_APIC_setup(struct IO_APIC_route_entry
**ioapic_entries
)
784 for (apic
= 0; apic
< nr_ioapics
; apic
++) {
785 if (!ioapic_entries
[apic
])
788 for (pin
= 0; pin
< nr_ioapic_registers
[apic
]; pin
++)
789 ioapic_write_entry(apic
, pin
,
790 ioapic_entries
[apic
][pin
]);
795 void free_ioapic_entries(struct IO_APIC_route_entry
**ioapic_entries
)
799 for (apic
= 0; apic
< nr_ioapics
; apic
++)
800 kfree(ioapic_entries
[apic
]);
802 kfree(ioapic_entries
);
806 * Find the IRQ entry number of a certain pin.
808 static int find_irq_entry(int apic
, int pin
, int type
)
812 for (i
= 0; i
< mp_irq_entries
; i
++)
813 if (mp_irqs
[i
].irqtype
== type
&&
814 (mp_irqs
[i
].dstapic
== mp_ioapics
[apic
].apicid
||
815 mp_irqs
[i
].dstapic
== MP_APIC_ALL
) &&
816 mp_irqs
[i
].dstirq
== pin
)
823 * Find the pin to which IRQ[irq] (ISA) is connected
825 static int __init
find_isa_irq_pin(int irq
, int type
)
829 for (i
= 0; i
< mp_irq_entries
; i
++) {
830 int lbus
= mp_irqs
[i
].srcbus
;
832 if (test_bit(lbus
, mp_bus_not_pci
) &&
833 (mp_irqs
[i
].irqtype
== type
) &&
834 (mp_irqs
[i
].srcbusirq
== irq
))
836 return mp_irqs
[i
].dstirq
;
841 static int __init
find_isa_irq_apic(int irq
, int type
)
845 for (i
= 0; i
< mp_irq_entries
; i
++) {
846 int lbus
= mp_irqs
[i
].srcbus
;
848 if (test_bit(lbus
, mp_bus_not_pci
) &&
849 (mp_irqs
[i
].irqtype
== type
) &&
850 (mp_irqs
[i
].srcbusirq
== irq
))
853 if (i
< mp_irq_entries
) {
855 for(apic
= 0; apic
< nr_ioapics
; apic
++) {
856 if (mp_ioapics
[apic
].apicid
== mp_irqs
[i
].dstapic
)
864 #if defined(CONFIG_EISA) || defined(CONFIG_MCA)
866 * EISA Edge/Level control register, ELCR
868 static int EISA_ELCR(unsigned int irq
)
870 if (irq
< NR_IRQS_LEGACY
) {
871 unsigned int port
= 0x4d0 + (irq
>> 3);
872 return (inb(port
) >> (irq
& 7)) & 1;
874 apic_printk(APIC_VERBOSE
, KERN_INFO
875 "Broken MPtable reports ISA irq %d\n", irq
);
881 /* ISA interrupts are always polarity zero edge triggered,
882 * when listed as conforming in the MP table. */
884 #define default_ISA_trigger(idx) (0)
885 #define default_ISA_polarity(idx) (0)
887 /* EISA interrupts are always polarity zero and can be edge or level
888 * trigger depending on the ELCR value. If an interrupt is listed as
889 * EISA conforming in the MP table, that means its trigger type must
890 * be read in from the ELCR */
892 #define default_EISA_trigger(idx) (EISA_ELCR(mp_irqs[idx].srcbusirq))
893 #define default_EISA_polarity(idx) default_ISA_polarity(idx)
895 /* PCI interrupts are always polarity one level triggered,
896 * when listed as conforming in the MP table. */
898 #define default_PCI_trigger(idx) (1)
899 #define default_PCI_polarity(idx) (1)
901 /* MCA interrupts are always polarity zero level triggered,
902 * when listed as conforming in the MP table. */
904 #define default_MCA_trigger(idx) (1)
905 #define default_MCA_polarity(idx) default_ISA_polarity(idx)
907 static int MPBIOS_polarity(int idx
)
909 int bus
= mp_irqs
[idx
].srcbus
;
913 * Determine IRQ line polarity (high active or low active):
915 switch (mp_irqs
[idx
].irqflag
& 3)
917 case 0: /* conforms, ie. bus-type dependent polarity */
918 if (test_bit(bus
, mp_bus_not_pci
))
919 polarity
= default_ISA_polarity(idx
);
921 polarity
= default_PCI_polarity(idx
);
923 case 1: /* high active */
928 case 2: /* reserved */
930 printk(KERN_WARNING
"broken BIOS!!\n");
934 case 3: /* low active */
939 default: /* invalid */
941 printk(KERN_WARNING
"broken BIOS!!\n");
949 static int MPBIOS_trigger(int idx
)
951 int bus
= mp_irqs
[idx
].srcbus
;
955 * Determine IRQ trigger mode (edge or level sensitive):
957 switch ((mp_irqs
[idx
].irqflag
>>2) & 3)
959 case 0: /* conforms, ie. bus-type dependent */
960 if (test_bit(bus
, mp_bus_not_pci
))
961 trigger
= default_ISA_trigger(idx
);
963 trigger
= default_PCI_trigger(idx
);
964 #if defined(CONFIG_EISA) || defined(CONFIG_MCA)
965 switch (mp_bus_id_to_type
[bus
]) {
966 case MP_BUS_ISA
: /* ISA pin */
968 /* set before the switch */
971 case MP_BUS_EISA
: /* EISA pin */
973 trigger
= default_EISA_trigger(idx
);
976 case MP_BUS_PCI
: /* PCI pin */
978 /* set before the switch */
981 case MP_BUS_MCA
: /* MCA pin */
983 trigger
= default_MCA_trigger(idx
);
988 printk(KERN_WARNING
"broken BIOS!!\n");
1000 case 2: /* reserved */
1002 printk(KERN_WARNING
"broken BIOS!!\n");
1011 default: /* invalid */
1013 printk(KERN_WARNING
"broken BIOS!!\n");
1021 static inline int irq_polarity(int idx
)
1023 return MPBIOS_polarity(idx
);
1026 static inline int irq_trigger(int idx
)
1028 return MPBIOS_trigger(idx
);
1031 int (*ioapic_renumber_irq
)(int ioapic
, int irq
);
1032 static int pin_2_irq(int idx
, int apic
, int pin
)
1035 int bus
= mp_irqs
[idx
].srcbus
;
1038 * Debugging check, we are in big trouble if this message pops up!
1040 if (mp_irqs
[idx
].dstirq
!= pin
)
1041 printk(KERN_ERR
"broken BIOS or MPTABLE parser, ayiee!!\n");
1043 if (test_bit(bus
, mp_bus_not_pci
)) {
1044 irq
= mp_irqs
[idx
].srcbusirq
;
1047 * PCI IRQs are mapped in order
1051 irq
+= nr_ioapic_registers
[i
++];
1054 * For MPS mode, so far only needed by ES7000 platform
1056 if (ioapic_renumber_irq
)
1057 irq
= ioapic_renumber_irq(apic
, irq
);
1060 #ifdef CONFIG_X86_32
1062 * PCI IRQ command line redirection. Yes, limits are hardcoded.
1064 if ((pin
>= 16) && (pin
<= 23)) {
1065 if (pirq_entries
[pin
-16] != -1) {
1066 if (!pirq_entries
[pin
-16]) {
1067 apic_printk(APIC_VERBOSE
, KERN_DEBUG
1068 "disabling PIRQ%d\n", pin
-16);
1070 irq
= pirq_entries
[pin
-16];
1071 apic_printk(APIC_VERBOSE
, KERN_DEBUG
1072 "using PIRQ%d -> IRQ %d\n",
1083 * Find a specific PCI IRQ entry.
1084 * Not an __init, possibly needed by modules
1086 int IO_APIC_get_PCI_irq_vector(int bus
, int slot
, int pin
,
1087 struct io_apic_irq_attr
*irq_attr
)
1089 int apic
, i
, best_guess
= -1;
1091 apic_printk(APIC_DEBUG
,
1092 "querying PCI -> IRQ mapping bus:%d, slot:%d, pin:%d.\n",
1094 if (test_bit(bus
, mp_bus_not_pci
)) {
1095 apic_printk(APIC_VERBOSE
,
1096 "PCI BIOS passed nonexistent PCI bus %d!\n", bus
);
1099 for (i
= 0; i
< mp_irq_entries
; i
++) {
1100 int lbus
= mp_irqs
[i
].srcbus
;
1102 for (apic
= 0; apic
< nr_ioapics
; apic
++)
1103 if (mp_ioapics
[apic
].apicid
== mp_irqs
[i
].dstapic
||
1104 mp_irqs
[i
].dstapic
== MP_APIC_ALL
)
1107 if (!test_bit(lbus
, mp_bus_not_pci
) &&
1108 !mp_irqs
[i
].irqtype
&&
1110 (slot
== ((mp_irqs
[i
].srcbusirq
>> 2) & 0x1f))) {
1111 int irq
= pin_2_irq(i
, apic
, mp_irqs
[i
].dstirq
);
1113 if (!(apic
|| IO_APIC_IRQ(irq
)))
1116 if (pin
== (mp_irqs
[i
].srcbusirq
& 3)) {
1117 set_io_apic_irq_attr(irq_attr
, apic
,
1124 * Use the first all-but-pin matching entry as a
1125 * best-guess fuzzy result for broken mptables.
1127 if (best_guess
< 0) {
1128 set_io_apic_irq_attr(irq_attr
, apic
,
1138 EXPORT_SYMBOL(IO_APIC_get_PCI_irq_vector
);
1140 void lock_vector_lock(void)
1142 /* Used to the online set of cpus does not change
1143 * during assign_irq_vector.
1145 spin_lock(&vector_lock
);
1148 void unlock_vector_lock(void)
1150 spin_unlock(&vector_lock
);
1154 __assign_irq_vector(int irq
, struct irq_cfg
*cfg
, const struct cpumask
*mask
)
1157 * NOTE! The local APIC isn't very good at handling
1158 * multiple interrupts at the same interrupt level.
1159 * As the interrupt level is determined by taking the
1160 * vector number and shifting that right by 4, we
1161 * want to spread these out a bit so that they don't
1162 * all fall in the same interrupt level.
1164 * Also, we've got to be careful not to trash gate
1165 * 0x80, because int 0x80 is hm, kind of importantish. ;)
1167 static int current_vector
= FIRST_DEVICE_VECTOR
, current_offset
= 0;
1168 unsigned int old_vector
;
1170 cpumask_var_t tmp_mask
;
1172 if ((cfg
->move_in_progress
) || cfg
->move_cleanup_count
)
1175 if (!alloc_cpumask_var(&tmp_mask
, GFP_ATOMIC
))
1178 old_vector
= cfg
->vector
;
1180 cpumask_and(tmp_mask
, mask
, cpu_online_mask
);
1181 cpumask_and(tmp_mask
, cfg
->domain
, tmp_mask
);
1182 if (!cpumask_empty(tmp_mask
)) {
1183 free_cpumask_var(tmp_mask
);
1188 /* Only try and allocate irqs on cpus that are present */
1190 for_each_cpu_and(cpu
, mask
, cpu_online_mask
) {
1194 apic
->vector_allocation_domain(cpu
, tmp_mask
);
1196 vector
= current_vector
;
1197 offset
= current_offset
;
1200 if (vector
>= first_system_vector
) {
1201 /* If out of vectors on large boxen, must share them. */
1202 offset
= (offset
+ 1) % 8;
1203 vector
= FIRST_DEVICE_VECTOR
+ offset
;
1205 if (unlikely(current_vector
== vector
))
1208 if (test_bit(vector
, used_vectors
))
1211 for_each_cpu_and(new_cpu
, tmp_mask
, cpu_online_mask
)
1212 if (per_cpu(vector_irq
, new_cpu
)[vector
] != -1)
1215 current_vector
= vector
;
1216 current_offset
= offset
;
1218 cfg
->move_in_progress
= 1;
1219 cpumask_copy(cfg
->old_domain
, cfg
->domain
);
1221 for_each_cpu_and(new_cpu
, tmp_mask
, cpu_online_mask
)
1222 per_cpu(vector_irq
, new_cpu
)[vector
] = irq
;
1223 cfg
->vector
= vector
;
1224 cpumask_copy(cfg
->domain
, tmp_mask
);
1228 free_cpumask_var(tmp_mask
);
1233 assign_irq_vector(int irq
, struct irq_cfg
*cfg
, const struct cpumask
*mask
)
1236 unsigned long flags
;
1238 spin_lock_irqsave(&vector_lock
, flags
);
1239 err
= __assign_irq_vector(irq
, cfg
, mask
);
1240 spin_unlock_irqrestore(&vector_lock
, flags
);
1244 static void __clear_irq_vector(int irq
, struct irq_cfg
*cfg
)
1248 BUG_ON(!cfg
->vector
);
1250 vector
= cfg
->vector
;
1251 for_each_cpu_and(cpu
, cfg
->domain
, cpu_online_mask
)
1252 per_cpu(vector_irq
, cpu
)[vector
] = -1;
1255 cpumask_clear(cfg
->domain
);
1257 if (likely(!cfg
->move_in_progress
))
1259 for_each_cpu_and(cpu
, cfg
->old_domain
, cpu_online_mask
) {
1260 for (vector
= FIRST_EXTERNAL_VECTOR
; vector
< NR_VECTORS
;
1262 if (per_cpu(vector_irq
, cpu
)[vector
] != irq
)
1264 per_cpu(vector_irq
, cpu
)[vector
] = -1;
1268 cfg
->move_in_progress
= 0;
1271 void __setup_vector_irq(int cpu
)
1273 /* Initialize vector_irq on a new cpu */
1274 /* This function must be called with vector_lock held */
1276 struct irq_cfg
*cfg
;
1277 struct irq_desc
*desc
;
1279 /* Mark the inuse vectors */
1280 for_each_irq_desc(irq
, desc
) {
1281 cfg
= desc
->chip_data
;
1282 if (!cpumask_test_cpu(cpu
, cfg
->domain
))
1284 vector
= cfg
->vector
;
1285 per_cpu(vector_irq
, cpu
)[vector
] = irq
;
1287 /* Mark the free vectors */
1288 for (vector
= 0; vector
< NR_VECTORS
; ++vector
) {
1289 irq
= per_cpu(vector_irq
, cpu
)[vector
];
1294 if (!cpumask_test_cpu(cpu
, cfg
->domain
))
1295 per_cpu(vector_irq
, cpu
)[vector
] = -1;
1299 static struct irq_chip ioapic_chip
;
1300 static struct irq_chip ir_ioapic_chip
;
1302 #define IOAPIC_AUTO -1
1303 #define IOAPIC_EDGE 0
1304 #define IOAPIC_LEVEL 1
1306 #ifdef CONFIG_X86_32
1307 static inline int IO_APIC_irq_trigger(int irq
)
1311 for (apic
= 0; apic
< nr_ioapics
; apic
++) {
1312 for (pin
= 0; pin
< nr_ioapic_registers
[apic
]; pin
++) {
1313 idx
= find_irq_entry(apic
, pin
, mp_INT
);
1314 if ((idx
!= -1) && (irq
== pin_2_irq(idx
, apic
, pin
)))
1315 return irq_trigger(idx
);
1319 * nonexistent IRQs are edge default
1324 static inline int IO_APIC_irq_trigger(int irq
)
1330 static void ioapic_register_intr(int irq
, struct irq_desc
*desc
, unsigned long trigger
)
1333 if ((trigger
== IOAPIC_AUTO
&& IO_APIC_irq_trigger(irq
)) ||
1334 trigger
== IOAPIC_LEVEL
)
1335 desc
->status
|= IRQ_LEVEL
;
1337 desc
->status
&= ~IRQ_LEVEL
;
1339 if (irq_remapped(irq
)) {
1340 desc
->status
|= IRQ_MOVE_PCNTXT
;
1342 set_irq_chip_and_handler_name(irq
, &ir_ioapic_chip
,
1346 set_irq_chip_and_handler_name(irq
, &ir_ioapic_chip
,
1347 handle_edge_irq
, "edge");
1351 if ((trigger
== IOAPIC_AUTO
&& IO_APIC_irq_trigger(irq
)) ||
1352 trigger
== IOAPIC_LEVEL
)
1353 set_irq_chip_and_handler_name(irq
, &ioapic_chip
,
1357 set_irq_chip_and_handler_name(irq
, &ioapic_chip
,
1358 handle_edge_irq
, "edge");
1361 int setup_ioapic_entry(int apic_id
, int irq
,
1362 struct IO_APIC_route_entry
*entry
,
1363 unsigned int destination
, int trigger
,
1364 int polarity
, int vector
, int pin
)
1367 * add it to the IO-APIC irq-routing table:
1369 memset(entry
,0,sizeof(*entry
));
1371 if (intr_remapping_enabled
) {
1372 struct intel_iommu
*iommu
= map_ioapic_to_ir(apic_id
);
1374 struct IR_IO_APIC_route_entry
*ir_entry
=
1375 (struct IR_IO_APIC_route_entry
*) entry
;
1379 panic("No mapping iommu for ioapic %d\n", apic_id
);
1381 index
= alloc_irte(iommu
, irq
, 1);
1383 panic("Failed to allocate IRTE for ioapic %d\n", apic_id
);
1385 memset(&irte
, 0, sizeof(irte
));
1388 irte
.dst_mode
= apic
->irq_dest_mode
;
1390 * Trigger mode in the IRTE will always be edge, and the
1391 * actual level or edge trigger will be setup in the IO-APIC
1392 * RTE. This will help simplify level triggered irq migration.
1393 * For more details, see the comments above explainig IO-APIC
1394 * irq migration in the presence of interrupt-remapping.
1396 irte
.trigger_mode
= 0;
1397 irte
.dlvry_mode
= apic
->irq_delivery_mode
;
1398 irte
.vector
= vector
;
1399 irte
.dest_id
= IRTE_DEST(destination
);
1401 /* Set source-id of interrupt request */
1402 set_ioapic_sid(&irte
, apic_id
);
1404 modify_irte(irq
, &irte
);
1406 ir_entry
->index2
= (index
>> 15) & 0x1;
1408 ir_entry
->format
= 1;
1409 ir_entry
->index
= (index
& 0x7fff);
1411 * IO-APIC RTE will be configured with virtual vector.
1412 * irq handler will do the explicit EOI to the io-apic.
1414 ir_entry
->vector
= pin
;
1416 entry
->delivery_mode
= apic
->irq_delivery_mode
;
1417 entry
->dest_mode
= apic
->irq_dest_mode
;
1418 entry
->dest
= destination
;
1419 entry
->vector
= vector
;
1422 entry
->mask
= 0; /* enable IRQ */
1423 entry
->trigger
= trigger
;
1424 entry
->polarity
= polarity
;
1426 /* Mask level triggered irqs.
1427 * Use IRQ_DELAYED_DISABLE for edge triggered irqs.
1434 static void setup_IO_APIC_irq(int apic_id
, int pin
, unsigned int irq
, struct irq_desc
*desc
,
1435 int trigger
, int polarity
)
1437 struct irq_cfg
*cfg
;
1438 struct IO_APIC_route_entry entry
;
1441 if (!IO_APIC_IRQ(irq
))
1444 cfg
= desc
->chip_data
;
1446 if (assign_irq_vector(irq
, cfg
, apic
->target_cpus()))
1449 dest
= apic
->cpu_mask_to_apicid_and(cfg
->domain
, apic
->target_cpus());
1451 apic_printk(APIC_VERBOSE
,KERN_DEBUG
1452 "IOAPIC[%d]: Set routing entry (%d-%d -> 0x%x -> "
1453 "IRQ %d Mode:%i Active:%i)\n",
1454 apic_id
, mp_ioapics
[apic_id
].apicid
, pin
, cfg
->vector
,
1455 irq
, trigger
, polarity
);
1458 if (setup_ioapic_entry(mp_ioapics
[apic_id
].apicid
, irq
, &entry
,
1459 dest
, trigger
, polarity
, cfg
->vector
, pin
)) {
1460 printk("Failed to setup ioapic entry for ioapic %d, pin %d\n",
1461 mp_ioapics
[apic_id
].apicid
, pin
);
1462 __clear_irq_vector(irq
, cfg
);
1466 ioapic_register_intr(irq
, desc
, trigger
);
1467 if (irq
< NR_IRQS_LEGACY
)
1468 disable_8259A_irq(irq
);
1470 ioapic_write_entry(apic_id
, pin
, entry
);
1474 DECLARE_BITMAP(pin_programmed
, MP_MAX_IOAPIC_PIN
+ 1);
1475 } mp_ioapic_routing
[MAX_IO_APICS
];
1477 static void __init
setup_IO_APIC_irqs(void)
1479 int apic_id
= 0, pin
, idx
, irq
;
1481 struct irq_desc
*desc
;
1482 struct irq_cfg
*cfg
;
1483 int node
= cpu_to_node(boot_cpu_id
);
1485 apic_printk(APIC_VERBOSE
, KERN_DEBUG
"init IO_APIC IRQs\n");
1488 if (!acpi_disabled
&& acpi_ioapic
) {
1489 apic_id
= mp_find_ioapic(0);
1495 for (pin
= 0; pin
< nr_ioapic_registers
[apic_id
]; pin
++) {
1496 idx
= find_irq_entry(apic_id
, pin
, mp_INT
);
1500 apic_printk(APIC_VERBOSE
,
1501 KERN_DEBUG
" %d-%d",
1502 mp_ioapics
[apic_id
].apicid
, pin
);
1504 apic_printk(APIC_VERBOSE
, " %d-%d",
1505 mp_ioapics
[apic_id
].apicid
, pin
);
1509 apic_printk(APIC_VERBOSE
,
1510 " (apicid-pin) not connected\n");
1514 irq
= pin_2_irq(idx
, apic_id
, pin
);
1517 * Skip the timer IRQ if there's a quirk handler
1518 * installed and if it returns 1:
1520 if (apic
->multi_timer_check
&&
1521 apic
->multi_timer_check(apic_id
, irq
))
1524 desc
= irq_to_desc_alloc_node(irq
, node
);
1526 printk(KERN_INFO
"can not get irq_desc for %d\n", irq
);
1529 cfg
= desc
->chip_data
;
1530 add_pin_to_irq_node(cfg
, node
, apic_id
, pin
);
1532 * don't mark it in pin_programmed, so later acpi could
1533 * set it correctly when irq < 16
1535 setup_IO_APIC_irq(apic_id
, pin
, irq
, desc
,
1536 irq_trigger(idx
), irq_polarity(idx
));
1540 apic_printk(APIC_VERBOSE
,
1541 " (apicid-pin) not connected\n");
1545 * Set up the timer pin, possibly with the 8259A-master behind.
1547 static void __init
setup_timer_IRQ0_pin(unsigned int apic_id
, unsigned int pin
,
1550 struct IO_APIC_route_entry entry
;
1552 if (intr_remapping_enabled
)
1555 memset(&entry
, 0, sizeof(entry
));
1558 * We use logical delivery to get the timer IRQ
1561 entry
.dest_mode
= apic
->irq_dest_mode
;
1562 entry
.mask
= 0; /* don't mask IRQ for edge */
1563 entry
.dest
= apic
->cpu_mask_to_apicid(apic
->target_cpus());
1564 entry
.delivery_mode
= apic
->irq_delivery_mode
;
1567 entry
.vector
= vector
;
1570 * The timer IRQ doesn't have to know that behind the
1571 * scene we may have a 8259A-master in AEOI mode ...
1573 set_irq_chip_and_handler_name(0, &ioapic_chip
, handle_edge_irq
, "edge");
1576 * Add it to the IO-APIC irq-routing table:
1578 ioapic_write_entry(apic_id
, pin
, entry
);
1582 __apicdebuginit(void) print_IO_APIC(void)
1585 union IO_APIC_reg_00 reg_00
;
1586 union IO_APIC_reg_01 reg_01
;
1587 union IO_APIC_reg_02 reg_02
;
1588 union IO_APIC_reg_03 reg_03
;
1589 unsigned long flags
;
1590 struct irq_cfg
*cfg
;
1591 struct irq_desc
*desc
;
1594 if (apic_verbosity
== APIC_QUIET
)
1597 printk(KERN_DEBUG
"number of MP IRQ sources: %d.\n", mp_irq_entries
);
1598 for (i
= 0; i
< nr_ioapics
; i
++)
1599 printk(KERN_DEBUG
"number of IO-APIC #%d registers: %d.\n",
1600 mp_ioapics
[i
].apicid
, nr_ioapic_registers
[i
]);
1603 * We are a bit conservative about what we expect. We have to
1604 * know about every hardware change ASAP.
1606 printk(KERN_INFO
"testing the IO APIC.......................\n");
1608 for (apic
= 0; apic
< nr_ioapics
; apic
++) {
1610 spin_lock_irqsave(&ioapic_lock
, flags
);
1611 reg_00
.raw
= io_apic_read(apic
, 0);
1612 reg_01
.raw
= io_apic_read(apic
, 1);
1613 if (reg_01
.bits
.version
>= 0x10)
1614 reg_02
.raw
= io_apic_read(apic
, 2);
1615 if (reg_01
.bits
.version
>= 0x20)
1616 reg_03
.raw
= io_apic_read(apic
, 3);
1617 spin_unlock_irqrestore(&ioapic_lock
, flags
);
1620 printk(KERN_DEBUG
"IO APIC #%d......\n", mp_ioapics
[apic
].apicid
);
1621 printk(KERN_DEBUG
".... register #00: %08X\n", reg_00
.raw
);
1622 printk(KERN_DEBUG
"....... : physical APIC id: %02X\n", reg_00
.bits
.ID
);
1623 printk(KERN_DEBUG
"....... : Delivery Type: %X\n", reg_00
.bits
.delivery_type
);
1624 printk(KERN_DEBUG
"....... : LTS : %X\n", reg_00
.bits
.LTS
);
1626 printk(KERN_DEBUG
".... register #01: %08X\n", *(int *)®_01
);
1627 printk(KERN_DEBUG
"....... : max redirection entries: %04X\n", reg_01
.bits
.entries
);
1629 printk(KERN_DEBUG
"....... : PRQ implemented: %X\n", reg_01
.bits
.PRQ
);
1630 printk(KERN_DEBUG
"....... : IO APIC version: %04X\n", reg_01
.bits
.version
);
1633 * Some Intel chipsets with IO APIC VERSION of 0x1? don't have reg_02,
1634 * but the value of reg_02 is read as the previous read register
1635 * value, so ignore it if reg_02 == reg_01.
1637 if (reg_01
.bits
.version
>= 0x10 && reg_02
.raw
!= reg_01
.raw
) {
1638 printk(KERN_DEBUG
".... register #02: %08X\n", reg_02
.raw
);
1639 printk(KERN_DEBUG
"....... : arbitration: %02X\n", reg_02
.bits
.arbitration
);
1643 * Some Intel chipsets with IO APIC VERSION of 0x2? don't have reg_02
1644 * or reg_03, but the value of reg_0[23] is read as the previous read
1645 * register value, so ignore it if reg_03 == reg_0[12].
1647 if (reg_01
.bits
.version
>= 0x20 && reg_03
.raw
!= reg_02
.raw
&&
1648 reg_03
.raw
!= reg_01
.raw
) {
1649 printk(KERN_DEBUG
".... register #03: %08X\n", reg_03
.raw
);
1650 printk(KERN_DEBUG
"....... : Boot DT : %X\n", reg_03
.bits
.boot_DT
);
1653 printk(KERN_DEBUG
".... IRQ redirection table:\n");
1655 printk(KERN_DEBUG
" NR Dst Mask Trig IRR Pol"
1656 " Stat Dmod Deli Vect: \n");
1658 for (i
= 0; i
<= reg_01
.bits
.entries
; i
++) {
1659 struct IO_APIC_route_entry entry
;
1661 entry
= ioapic_read_entry(apic
, i
);
1663 printk(KERN_DEBUG
" %02x %03X ",
1668 printk("%1d %1d %1d %1d %1d %1d %1d %02X\n",
1673 entry
.delivery_status
,
1675 entry
.delivery_mode
,
1680 printk(KERN_DEBUG
"IRQ to pin mappings:\n");
1681 for_each_irq_desc(irq
, desc
) {
1682 struct irq_pin_list
*entry
;
1684 cfg
= desc
->chip_data
;
1685 entry
= cfg
->irq_2_pin
;
1688 printk(KERN_DEBUG
"IRQ%d ", irq
);
1689 for_each_irq_pin(entry
, cfg
->irq_2_pin
)
1690 printk("-> %d:%d", entry
->apic
, entry
->pin
);
1694 printk(KERN_INFO
".................................... done.\n");
1699 __apicdebuginit(void) print_APIC_field(int base
)
1703 if (apic_verbosity
== APIC_QUIET
)
1708 for (i
= 0; i
< 8; i
++)
1709 printk(KERN_CONT
"%08x", apic_read(base
+ i
*0x10));
1711 printk(KERN_CONT
"\n");
1714 __apicdebuginit(void) print_local_APIC(void *dummy
)
1716 unsigned int i
, v
, ver
, maxlvt
;
1719 if (apic_verbosity
== APIC_QUIET
)
1722 printk(KERN_DEBUG
"printing local APIC contents on CPU#%d/%d:\n",
1723 smp_processor_id(), hard_smp_processor_id());
1724 v
= apic_read(APIC_ID
);
1725 printk(KERN_INFO
"... APIC ID: %08x (%01x)\n", v
, read_apic_id());
1726 v
= apic_read(APIC_LVR
);
1727 printk(KERN_INFO
"... APIC VERSION: %08x\n", v
);
1728 ver
= GET_APIC_VERSION(v
);
1729 maxlvt
= lapic_get_maxlvt();
1731 v
= apic_read(APIC_TASKPRI
);
1732 printk(KERN_DEBUG
"... APIC TASKPRI: %08x (%02x)\n", v
, v
& APIC_TPRI_MASK
);
1734 if (APIC_INTEGRATED(ver
)) { /* !82489DX */
1735 if (!APIC_XAPIC(ver
)) {
1736 v
= apic_read(APIC_ARBPRI
);
1737 printk(KERN_DEBUG
"... APIC ARBPRI: %08x (%02x)\n", v
,
1738 v
& APIC_ARBPRI_MASK
);
1740 v
= apic_read(APIC_PROCPRI
);
1741 printk(KERN_DEBUG
"... APIC PROCPRI: %08x\n", v
);
1745 * Remote read supported only in the 82489DX and local APIC for
1746 * Pentium processors.
1748 if (!APIC_INTEGRATED(ver
) || maxlvt
== 3) {
1749 v
= apic_read(APIC_RRR
);
1750 printk(KERN_DEBUG
"... APIC RRR: %08x\n", v
);
1753 v
= apic_read(APIC_LDR
);
1754 printk(KERN_DEBUG
"... APIC LDR: %08x\n", v
);
1755 if (!x2apic_enabled()) {
1756 v
= apic_read(APIC_DFR
);
1757 printk(KERN_DEBUG
"... APIC DFR: %08x\n", v
);
1759 v
= apic_read(APIC_SPIV
);
1760 printk(KERN_DEBUG
"... APIC SPIV: %08x\n", v
);
1762 printk(KERN_DEBUG
"... APIC ISR field:\n");
1763 print_APIC_field(APIC_ISR
);
1764 printk(KERN_DEBUG
"... APIC TMR field:\n");
1765 print_APIC_field(APIC_TMR
);
1766 printk(KERN_DEBUG
"... APIC IRR field:\n");
1767 print_APIC_field(APIC_IRR
);
1769 if (APIC_INTEGRATED(ver
)) { /* !82489DX */
1770 if (maxlvt
> 3) /* Due to the Pentium erratum 3AP. */
1771 apic_write(APIC_ESR
, 0);
1773 v
= apic_read(APIC_ESR
);
1774 printk(KERN_DEBUG
"... APIC ESR: %08x\n", v
);
1777 icr
= apic_icr_read();
1778 printk(KERN_DEBUG
"... APIC ICR: %08x\n", (u32
)icr
);
1779 printk(KERN_DEBUG
"... APIC ICR2: %08x\n", (u32
)(icr
>> 32));
1781 v
= apic_read(APIC_LVTT
);
1782 printk(KERN_DEBUG
"... APIC LVTT: %08x\n", v
);
1784 if (maxlvt
> 3) { /* PC is LVT#4. */
1785 v
= apic_read(APIC_LVTPC
);
1786 printk(KERN_DEBUG
"... APIC LVTPC: %08x\n", v
);
1788 v
= apic_read(APIC_LVT0
);
1789 printk(KERN_DEBUG
"... APIC LVT0: %08x\n", v
);
1790 v
= apic_read(APIC_LVT1
);
1791 printk(KERN_DEBUG
"... APIC LVT1: %08x\n", v
);
1793 if (maxlvt
> 2) { /* ERR is LVT#3. */
1794 v
= apic_read(APIC_LVTERR
);
1795 printk(KERN_DEBUG
"... APIC LVTERR: %08x\n", v
);
1798 v
= apic_read(APIC_TMICT
);
1799 printk(KERN_DEBUG
"... APIC TMICT: %08x\n", v
);
1800 v
= apic_read(APIC_TMCCT
);
1801 printk(KERN_DEBUG
"... APIC TMCCT: %08x\n", v
);
1802 v
= apic_read(APIC_TDCR
);
1803 printk(KERN_DEBUG
"... APIC TDCR: %08x\n", v
);
1805 if (boot_cpu_has(X86_FEATURE_EXTAPIC
)) {
1806 v
= apic_read(APIC_EFEAT
);
1807 maxlvt
= (v
>> 16) & 0xff;
1808 printk(KERN_DEBUG
"... APIC EFEAT: %08x\n", v
);
1809 v
= apic_read(APIC_ECTRL
);
1810 printk(KERN_DEBUG
"... APIC ECTRL: %08x\n", v
);
1811 for (i
= 0; i
< maxlvt
; i
++) {
1812 v
= apic_read(APIC_EILVTn(i
));
1813 printk(KERN_DEBUG
"... APIC EILVT%d: %08x\n", i
, v
);
1819 __apicdebuginit(void) print_all_local_APICs(void)
1824 for_each_online_cpu(cpu
)
1825 smp_call_function_single(cpu
, print_local_APIC
, NULL
, 1);
1829 __apicdebuginit(void) print_PIC(void)
1832 unsigned long flags
;
1834 if (apic_verbosity
== APIC_QUIET
)
1837 printk(KERN_DEBUG
"\nprinting PIC contents\n");
1839 spin_lock_irqsave(&i8259A_lock
, flags
);
1841 v
= inb(0xa1) << 8 | inb(0x21);
1842 printk(KERN_DEBUG
"... PIC IMR: %04x\n", v
);
1844 v
= inb(0xa0) << 8 | inb(0x20);
1845 printk(KERN_DEBUG
"... PIC IRR: %04x\n", v
);
1849 v
= inb(0xa0) << 8 | inb(0x20);
1853 spin_unlock_irqrestore(&i8259A_lock
, flags
);
1855 printk(KERN_DEBUG
"... PIC ISR: %04x\n", v
);
1857 v
= inb(0x4d1) << 8 | inb(0x4d0);
1858 printk(KERN_DEBUG
"... PIC ELCR: %04x\n", v
);
1861 __apicdebuginit(int) print_all_ICs(void)
1865 /* don't print out if apic is not there */
1866 if (!cpu_has_apic
|| disable_apic
)
1869 print_all_local_APICs();
1875 fs_initcall(print_all_ICs
);
1878 /* Where if anywhere is the i8259 connect in external int mode */
1879 static struct { int pin
, apic
; } ioapic_i8259
= { -1, -1 };
1881 void __init
enable_IO_APIC(void)
1883 union IO_APIC_reg_01 reg_01
;
1884 int i8259_apic
, i8259_pin
;
1886 unsigned long flags
;
1889 * The number of IO-APIC IRQ registers (== #pins):
1891 for (apic
= 0; apic
< nr_ioapics
; apic
++) {
1892 spin_lock_irqsave(&ioapic_lock
, flags
);
1893 reg_01
.raw
= io_apic_read(apic
, 1);
1894 spin_unlock_irqrestore(&ioapic_lock
, flags
);
1895 nr_ioapic_registers
[apic
] = reg_01
.bits
.entries
+1;
1897 for(apic
= 0; apic
< nr_ioapics
; apic
++) {
1899 /* See if any of the pins is in ExtINT mode */
1900 for (pin
= 0; pin
< nr_ioapic_registers
[apic
]; pin
++) {
1901 struct IO_APIC_route_entry entry
;
1902 entry
= ioapic_read_entry(apic
, pin
);
1904 /* If the interrupt line is enabled and in ExtInt mode
1905 * I have found the pin where the i8259 is connected.
1907 if ((entry
.mask
== 0) && (entry
.delivery_mode
== dest_ExtINT
)) {
1908 ioapic_i8259
.apic
= apic
;
1909 ioapic_i8259
.pin
= pin
;
1915 /* Look to see what if the MP table has reported the ExtINT */
1916 /* If we could not find the appropriate pin by looking at the ioapic
1917 * the i8259 probably is not connected the ioapic but give the
1918 * mptable a chance anyway.
1920 i8259_pin
= find_isa_irq_pin(0, mp_ExtINT
);
1921 i8259_apic
= find_isa_irq_apic(0, mp_ExtINT
);
1922 /* Trust the MP table if nothing is setup in the hardware */
1923 if ((ioapic_i8259
.pin
== -1) && (i8259_pin
>= 0)) {
1924 printk(KERN_WARNING
"ExtINT not setup in hardware but reported by MP table\n");
1925 ioapic_i8259
.pin
= i8259_pin
;
1926 ioapic_i8259
.apic
= i8259_apic
;
1928 /* Complain if the MP table and the hardware disagree */
1929 if (((ioapic_i8259
.apic
!= i8259_apic
) || (ioapic_i8259
.pin
!= i8259_pin
)) &&
1930 (i8259_pin
>= 0) && (ioapic_i8259
.pin
>= 0))
1932 printk(KERN_WARNING
"ExtINT in hardware and MP table differ\n");
1936 * Do not trust the IO-APIC being empty at bootup
1942 * Not an __init, needed by the reboot code
1944 void disable_IO_APIC(void)
1947 * Clear the IO-APIC before rebooting:
1952 * If the i8259 is routed through an IOAPIC
1953 * Put that IOAPIC in virtual wire mode
1954 * so legacy interrupts can be delivered.
1956 * With interrupt-remapping, for now we will use virtual wire A mode,
1957 * as virtual wire B is little complex (need to configure both
1958 * IOAPIC RTE aswell as interrupt-remapping table entry).
1959 * As this gets called during crash dump, keep this simple for now.
1961 if (ioapic_i8259
.pin
!= -1 && !intr_remapping_enabled
) {
1962 struct IO_APIC_route_entry entry
;
1964 memset(&entry
, 0, sizeof(entry
));
1965 entry
.mask
= 0; /* Enabled */
1966 entry
.trigger
= 0; /* Edge */
1968 entry
.polarity
= 0; /* High */
1969 entry
.delivery_status
= 0;
1970 entry
.dest_mode
= 0; /* Physical */
1971 entry
.delivery_mode
= dest_ExtINT
; /* ExtInt */
1973 entry
.dest
= read_apic_id();
1976 * Add it to the IO-APIC irq-routing table:
1978 ioapic_write_entry(ioapic_i8259
.apic
, ioapic_i8259
.pin
, entry
);
1982 * Use virtual wire A mode when interrupt remapping is enabled.
1985 disconnect_bsp_APIC(!intr_remapping_enabled
&&
1986 ioapic_i8259
.pin
!= -1);
1989 #ifdef CONFIG_X86_32
1991 * function to set the IO-APIC physical IDs based on the
1992 * values stored in the MPC table.
1994 * by Matt Domsch <Matt_Domsch@dell.com> Tue Dec 21 12:25:05 CST 1999
1997 static void __init
setup_ioapic_ids_from_mpc(void)
1999 union IO_APIC_reg_00 reg_00
;
2000 physid_mask_t phys_id_present_map
;
2003 unsigned char old_id
;
2004 unsigned long flags
;
2006 if (x86_quirks
->setup_ioapic_ids
&& x86_quirks
->setup_ioapic_ids())
2010 * Don't check I/O APIC IDs for xAPIC systems. They have
2011 * no meaning without the serial APIC bus.
2013 if (!(boot_cpu_data
.x86_vendor
== X86_VENDOR_INTEL
)
2014 || APIC_XAPIC(apic_version
[boot_cpu_physical_apicid
]))
2017 * This is broken; anything with a real cpu count has to
2018 * circumvent this idiocy regardless.
2020 phys_id_present_map
= apic
->ioapic_phys_id_map(phys_cpu_present_map
);
2023 * Set the IOAPIC ID to the value stored in the MPC table.
2025 for (apic_id
= 0; apic_id
< nr_ioapics
; apic_id
++) {
2027 /* Read the register 0 value */
2028 spin_lock_irqsave(&ioapic_lock
, flags
);
2029 reg_00
.raw
= io_apic_read(apic_id
, 0);
2030 spin_unlock_irqrestore(&ioapic_lock
, flags
);
2032 old_id
= mp_ioapics
[apic_id
].apicid
;
2034 if (mp_ioapics
[apic_id
].apicid
>= get_physical_broadcast()) {
2035 printk(KERN_ERR
"BIOS bug, IO-APIC#%d ID is %d in the MPC table!...\n",
2036 apic_id
, mp_ioapics
[apic_id
].apicid
);
2037 printk(KERN_ERR
"... fixing up to %d. (tell your hw vendor)\n",
2039 mp_ioapics
[apic_id
].apicid
= reg_00
.bits
.ID
;
2043 * Sanity check, is the ID really free? Every APIC in a
2044 * system must have a unique ID or we get lots of nice
2045 * 'stuck on smp_invalidate_needed IPI wait' messages.
2047 if (apic
->check_apicid_used(phys_id_present_map
,
2048 mp_ioapics
[apic_id
].apicid
)) {
2049 printk(KERN_ERR
"BIOS bug, IO-APIC#%d ID %d is already used!...\n",
2050 apic_id
, mp_ioapics
[apic_id
].apicid
);
2051 for (i
= 0; i
< get_physical_broadcast(); i
++)
2052 if (!physid_isset(i
, phys_id_present_map
))
2054 if (i
>= get_physical_broadcast())
2055 panic("Max APIC ID exceeded!\n");
2056 printk(KERN_ERR
"... fixing up to %d. (tell your hw vendor)\n",
2058 physid_set(i
, phys_id_present_map
);
2059 mp_ioapics
[apic_id
].apicid
= i
;
2062 tmp
= apic
->apicid_to_cpu_present(mp_ioapics
[apic_id
].apicid
);
2063 apic_printk(APIC_VERBOSE
, "Setting %d in the "
2064 "phys_id_present_map\n",
2065 mp_ioapics
[apic_id
].apicid
);
2066 physids_or(phys_id_present_map
, phys_id_present_map
, tmp
);
2071 * We need to adjust the IRQ routing table
2072 * if the ID changed.
2074 if (old_id
!= mp_ioapics
[apic_id
].apicid
)
2075 for (i
= 0; i
< mp_irq_entries
; i
++)
2076 if (mp_irqs
[i
].dstapic
== old_id
)
2078 = mp_ioapics
[apic_id
].apicid
;
2081 * Read the right value from the MPC table and
2082 * write it into the ID register.
2084 apic_printk(APIC_VERBOSE
, KERN_INFO
2085 "...changing IO-APIC physical APIC ID to %d ...",
2086 mp_ioapics
[apic_id
].apicid
);
2088 reg_00
.bits
.ID
= mp_ioapics
[apic_id
].apicid
;
2089 spin_lock_irqsave(&ioapic_lock
, flags
);
2090 io_apic_write(apic_id
, 0, reg_00
.raw
);
2091 spin_unlock_irqrestore(&ioapic_lock
, flags
);
2096 spin_lock_irqsave(&ioapic_lock
, flags
);
2097 reg_00
.raw
= io_apic_read(apic_id
, 0);
2098 spin_unlock_irqrestore(&ioapic_lock
, flags
);
2099 if (reg_00
.bits
.ID
!= mp_ioapics
[apic_id
].apicid
)
2100 printk("could not set ID!\n");
2102 apic_printk(APIC_VERBOSE
, " ok.\n");
2107 int no_timer_check __initdata
;
2109 static int __init
notimercheck(char *s
)
2114 __setup("no_timer_check", notimercheck
);
2117 * There is a nasty bug in some older SMP boards, their mptable lies
2118 * about the timer IRQ. We do the following to work around the situation:
2120 * - timer IRQ defaults to IO-APIC IRQ
2121 * - if this function detects that timer IRQs are defunct, then we fall
2122 * back to ISA timer IRQs
2124 static int __init
timer_irq_works(void)
2126 unsigned long t1
= jiffies
;
2127 unsigned long flags
;
2132 local_save_flags(flags
);
2134 /* Let ten ticks pass... */
2135 mdelay((10 * 1000) / HZ
);
2136 local_irq_restore(flags
);
2139 * Expect a few ticks at least, to be sure some possible
2140 * glue logic does not lock up after one or two first
2141 * ticks in a non-ExtINT mode. Also the local APIC
2142 * might have cached one ExtINT interrupt. Finally, at
2143 * least one tick may be lost due to delays.
2147 if (time_after(jiffies
, t1
+ 4))
2153 * In the SMP+IOAPIC case it might happen that there are an unspecified
2154 * number of pending IRQ events unhandled. These cases are very rare,
2155 * so we 'resend' these IRQs via IPIs, to the same CPU. It's much
2156 * better to do it this way as thus we do not have to be aware of
2157 * 'pending' interrupts in the IRQ path, except at this point.
2160 * Edge triggered needs to resend any interrupt
2161 * that was delayed but this is now handled in the device
2166 * Starting up a edge-triggered IO-APIC interrupt is
2167 * nasty - we need to make sure that we get the edge.
2168 * If it is already asserted for some reason, we need
2169 * return 1 to indicate that is was pending.
2171 * This is not complete - we should be able to fake
2172 * an edge even if it isn't on the 8259A...
2175 static unsigned int startup_ioapic_irq(unsigned int irq
)
2177 int was_pending
= 0;
2178 unsigned long flags
;
2179 struct irq_cfg
*cfg
;
2181 spin_lock_irqsave(&ioapic_lock
, flags
);
2182 if (irq
< NR_IRQS_LEGACY
) {
2183 disable_8259A_irq(irq
);
2184 if (i8259A_irq_pending(irq
))
2188 __unmask_IO_APIC_irq(cfg
);
2189 spin_unlock_irqrestore(&ioapic_lock
, flags
);
2194 static int ioapic_retrigger_irq(unsigned int irq
)
2197 struct irq_cfg
*cfg
= irq_cfg(irq
);
2198 unsigned long flags
;
2200 spin_lock_irqsave(&vector_lock
, flags
);
2201 apic
->send_IPI_mask(cpumask_of(cpumask_first(cfg
->domain
)), cfg
->vector
);
2202 spin_unlock_irqrestore(&vector_lock
, flags
);
2208 * Level and edge triggered IO-APIC interrupts need different handling,
2209 * so we use two separate IRQ descriptors. Edge triggered IRQs can be
2210 * handled with the level-triggered descriptor, but that one has slightly
2211 * more overhead. Level-triggered interrupts cannot be handled with the
2212 * edge-triggered handler, without risking IRQ storms and other ugly
2217 static void send_cleanup_vector(struct irq_cfg
*cfg
)
2219 cpumask_var_t cleanup_mask
;
2221 if (unlikely(!alloc_cpumask_var(&cleanup_mask
, GFP_ATOMIC
))) {
2223 cfg
->move_cleanup_count
= 0;
2224 for_each_cpu_and(i
, cfg
->old_domain
, cpu_online_mask
)
2225 cfg
->move_cleanup_count
++;
2226 for_each_cpu_and(i
, cfg
->old_domain
, cpu_online_mask
)
2227 apic
->send_IPI_mask(cpumask_of(i
), IRQ_MOVE_CLEANUP_VECTOR
);
2229 cpumask_and(cleanup_mask
, cfg
->old_domain
, cpu_online_mask
);
2230 cfg
->move_cleanup_count
= cpumask_weight(cleanup_mask
);
2231 apic
->send_IPI_mask(cleanup_mask
, IRQ_MOVE_CLEANUP_VECTOR
);
2232 free_cpumask_var(cleanup_mask
);
2234 cfg
->move_in_progress
= 0;
2237 static void __target_IO_APIC_irq(unsigned int irq
, unsigned int dest
, struct irq_cfg
*cfg
)
2240 struct irq_pin_list
*entry
;
2241 u8 vector
= cfg
->vector
;
2243 for_each_irq_pin(entry
, cfg
->irq_2_pin
) {
2249 * With interrupt-remapping, destination information comes
2250 * from interrupt-remapping table entry.
2252 if (!irq_remapped(irq
))
2253 io_apic_write(apic
, 0x11 + pin
*2, dest
);
2254 reg
= io_apic_read(apic
, 0x10 + pin
*2);
2255 reg
&= ~IO_APIC_REDIR_VECTOR_MASK
;
2257 io_apic_modify(apic
, 0x10 + pin
*2, reg
);
2262 assign_irq_vector(int irq
, struct irq_cfg
*cfg
, const struct cpumask
*mask
);
2265 * Either sets desc->affinity to a valid value, and returns
2266 * ->cpu_mask_to_apicid of that, or returns BAD_APICID and
2267 * leaves desc->affinity untouched.
2270 set_desc_affinity(struct irq_desc
*desc
, const struct cpumask
*mask
)
2272 struct irq_cfg
*cfg
;
2275 if (!cpumask_intersects(mask
, cpu_online_mask
))
2279 cfg
= desc
->chip_data
;
2280 if (assign_irq_vector(irq
, cfg
, mask
))
2283 cpumask_copy(desc
->affinity
, mask
);
2285 return apic
->cpu_mask_to_apicid_and(desc
->affinity
, cfg
->domain
);
2289 set_ioapic_affinity_irq_desc(struct irq_desc
*desc
, const struct cpumask
*mask
)
2291 struct irq_cfg
*cfg
;
2292 unsigned long flags
;
2298 cfg
= desc
->chip_data
;
2300 spin_lock_irqsave(&ioapic_lock
, flags
);
2301 dest
= set_desc_affinity(desc
, mask
);
2302 if (dest
!= BAD_APICID
) {
2303 /* Only the high 8 bits are valid. */
2304 dest
= SET_APIC_LOGICAL_ID(dest
);
2305 __target_IO_APIC_irq(irq
, dest
, cfg
);
2308 spin_unlock_irqrestore(&ioapic_lock
, flags
);
2314 set_ioapic_affinity_irq(unsigned int irq
, const struct cpumask
*mask
)
2316 struct irq_desc
*desc
;
2318 desc
= irq_to_desc(irq
);
2320 return set_ioapic_affinity_irq_desc(desc
, mask
);
2323 #ifdef CONFIG_INTR_REMAP
2326 * Migrate the IO-APIC irq in the presence of intr-remapping.
2328 * For both level and edge triggered, irq migration is a simple atomic
2329 * update(of vector and cpu destination) of IRTE and flush the hardware cache.
2331 * For level triggered, we eliminate the io-apic RTE modification (with the
2332 * updated vector information), by using a virtual vector (io-apic pin number).
2333 * Real vector that is used for interrupting cpu will be coming from
2334 * the interrupt-remapping table entry.
2337 migrate_ioapic_irq_desc(struct irq_desc
*desc
, const struct cpumask
*mask
)
2339 struct irq_cfg
*cfg
;
2345 if (!cpumask_intersects(mask
, cpu_online_mask
))
2349 if (get_irte(irq
, &irte
))
2352 cfg
= desc
->chip_data
;
2353 if (assign_irq_vector(irq
, cfg
, mask
))
2356 dest
= apic
->cpu_mask_to_apicid_and(cfg
->domain
, mask
);
2358 irte
.vector
= cfg
->vector
;
2359 irte
.dest_id
= IRTE_DEST(dest
);
2362 * Modified the IRTE and flushes the Interrupt entry cache.
2364 modify_irte(irq
, &irte
);
2366 if (cfg
->move_in_progress
)
2367 send_cleanup_vector(cfg
);
2369 cpumask_copy(desc
->affinity
, mask
);
2375 * Migrates the IRQ destination in the process context.
2377 static int set_ir_ioapic_affinity_irq_desc(struct irq_desc
*desc
,
2378 const struct cpumask
*mask
)
2380 return migrate_ioapic_irq_desc(desc
, mask
);
2382 static int set_ir_ioapic_affinity_irq(unsigned int irq
,
2383 const struct cpumask
*mask
)
2385 struct irq_desc
*desc
= irq_to_desc(irq
);
2387 return set_ir_ioapic_affinity_irq_desc(desc
, mask
);
2390 static inline int set_ir_ioapic_affinity_irq_desc(struct irq_desc
*desc
,
2391 const struct cpumask
*mask
)
2397 asmlinkage
void smp_irq_move_cleanup_interrupt(void)
2399 unsigned vector
, me
;
2405 me
= smp_processor_id();
2406 for (vector
= FIRST_EXTERNAL_VECTOR
; vector
< NR_VECTORS
; vector
++) {
2409 struct irq_desc
*desc
;
2410 struct irq_cfg
*cfg
;
2411 irq
= __get_cpu_var(vector_irq
)[vector
];
2416 desc
= irq_to_desc(irq
);
2421 spin_lock(&desc
->lock
);
2422 if (!cfg
->move_cleanup_count
)
2425 if (vector
== cfg
->vector
&& cpumask_test_cpu(me
, cfg
->domain
))
2428 irr
= apic_read(APIC_IRR
+ (vector
/ 32 * 0x10));
2430 * Check if the vector that needs to be cleanedup is
2431 * registered at the cpu's IRR. If so, then this is not
2432 * the best time to clean it up. Lets clean it up in the
2433 * next attempt by sending another IRQ_MOVE_CLEANUP_VECTOR
2436 if (irr
& (1 << (vector
% 32))) {
2437 apic
->send_IPI_self(IRQ_MOVE_CLEANUP_VECTOR
);
2440 __get_cpu_var(vector_irq
)[vector
] = -1;
2441 cfg
->move_cleanup_count
--;
2443 spin_unlock(&desc
->lock
);
2449 static void irq_complete_move(struct irq_desc
**descp
)
2451 struct irq_desc
*desc
= *descp
;
2452 struct irq_cfg
*cfg
= desc
->chip_data
;
2453 unsigned vector
, me
;
2455 if (likely(!cfg
->move_in_progress
))
2458 vector
= ~get_irq_regs()->orig_ax
;
2459 me
= smp_processor_id();
2461 if (vector
== cfg
->vector
&& cpumask_test_cpu(me
, cfg
->domain
))
2462 send_cleanup_vector(cfg
);
2465 static inline void irq_complete_move(struct irq_desc
**descp
) {}
2468 static void ack_apic_edge(unsigned int irq
)
2470 struct irq_desc
*desc
= irq_to_desc(irq
);
2472 irq_complete_move(&desc
);
2473 move_native_irq(irq
);
2477 atomic_t irq_mis_count
;
2479 static void ack_apic_level(unsigned int irq
)
2481 struct irq_desc
*desc
= irq_to_desc(irq
);
2484 struct irq_cfg
*cfg
;
2485 int do_unmask_irq
= 0;
2487 irq_complete_move(&desc
);
2488 #ifdef CONFIG_GENERIC_PENDING_IRQ
2489 /* If we are moving the irq we need to mask it */
2490 if (unlikely(desc
->status
& IRQ_MOVE_PENDING
)) {
2492 mask_IO_APIC_irq_desc(desc
);
2497 * It appears there is an erratum which affects at least version 0x11
2498 * of I/O APIC (that's the 82093AA and cores integrated into various
2499 * chipsets). Under certain conditions a level-triggered interrupt is
2500 * erroneously delivered as edge-triggered one but the respective IRR
2501 * bit gets set nevertheless. As a result the I/O unit expects an EOI
2502 * message but it will never arrive and further interrupts are blocked
2503 * from the source. The exact reason is so far unknown, but the
2504 * phenomenon was observed when two consecutive interrupt requests
2505 * from a given source get delivered to the same CPU and the source is
2506 * temporarily disabled in between.
2508 * A workaround is to simulate an EOI message manually. We achieve it
2509 * by setting the trigger mode to edge and then to level when the edge
2510 * trigger mode gets detected in the TMR of a local APIC for a
2511 * level-triggered interrupt. We mask the source for the time of the
2512 * operation to prevent an edge-triggered interrupt escaping meanwhile.
2513 * The idea is from Manfred Spraul. --macro
2515 cfg
= desc
->chip_data
;
2517 v
= apic_read(APIC_TMR
+ ((i
& ~0x1f) >> 1));
2520 * We must acknowledge the irq before we move it or the acknowledge will
2521 * not propagate properly.
2525 /* Now we can move and renable the irq */
2526 if (unlikely(do_unmask_irq
)) {
2527 /* Only migrate the irq if the ack has been received.
2529 * On rare occasions the broadcast level triggered ack gets
2530 * delayed going to ioapics, and if we reprogram the
2531 * vector while Remote IRR is still set the irq will never
2534 * To prevent this scenario we read the Remote IRR bit
2535 * of the ioapic. This has two effects.
2536 * - On any sane system the read of the ioapic will
2537 * flush writes (and acks) going to the ioapic from
2539 * - We get to see if the ACK has actually been delivered.
2541 * Based on failed experiments of reprogramming the
2542 * ioapic entry from outside of irq context starting
2543 * with masking the ioapic entry and then polling until
2544 * Remote IRR was clear before reprogramming the
2545 * ioapic I don't trust the Remote IRR bit to be
2546 * completey accurate.
2548 * However there appears to be no other way to plug
2549 * this race, so if the Remote IRR bit is not
2550 * accurate and is causing problems then it is a hardware bug
2551 * and you can go talk to the chipset vendor about it.
2553 cfg
= desc
->chip_data
;
2554 if (!io_apic_level_ack_pending(cfg
))
2555 move_masked_irq(irq
);
2556 unmask_IO_APIC_irq_desc(desc
);
2559 /* Tail end of version 0x11 I/O APIC bug workaround */
2560 if (!(v
& (1 << (i
& 0x1f)))) {
2561 atomic_inc(&irq_mis_count
);
2562 spin_lock(&ioapic_lock
);
2563 __mask_and_edge_IO_APIC_irq(cfg
);
2564 __unmask_and_level_IO_APIC_irq(cfg
);
2565 spin_unlock(&ioapic_lock
);
2569 #ifdef CONFIG_INTR_REMAP
2570 static void __eoi_ioapic_irq(unsigned int irq
, struct irq_cfg
*cfg
)
2572 struct irq_pin_list
*entry
;
2574 for_each_irq_pin(entry
, cfg
->irq_2_pin
)
2575 io_apic_eoi(entry
->apic
, entry
->pin
);
2579 eoi_ioapic_irq(struct irq_desc
*desc
)
2581 struct irq_cfg
*cfg
;
2582 unsigned long flags
;
2586 cfg
= desc
->chip_data
;
2588 spin_lock_irqsave(&ioapic_lock
, flags
);
2589 __eoi_ioapic_irq(irq
, cfg
);
2590 spin_unlock_irqrestore(&ioapic_lock
, flags
);
2593 static void ir_ack_apic_edge(unsigned int irq
)
2598 static void ir_ack_apic_level(unsigned int irq
)
2600 struct irq_desc
*desc
= irq_to_desc(irq
);
2603 eoi_ioapic_irq(desc
);
2605 #endif /* CONFIG_INTR_REMAP */
2607 static struct irq_chip ioapic_chip __read_mostly
= {
2609 .startup
= startup_ioapic_irq
,
2610 .mask
= mask_IO_APIC_irq
,
2611 .unmask
= unmask_IO_APIC_irq
,
2612 .ack
= ack_apic_edge
,
2613 .eoi
= ack_apic_level
,
2615 .set_affinity
= set_ioapic_affinity_irq
,
2617 .retrigger
= ioapic_retrigger_irq
,
2620 static struct irq_chip ir_ioapic_chip __read_mostly
= {
2621 .name
= "IR-IO-APIC",
2622 .startup
= startup_ioapic_irq
,
2623 .mask
= mask_IO_APIC_irq
,
2624 .unmask
= unmask_IO_APIC_irq
,
2625 #ifdef CONFIG_INTR_REMAP
2626 .ack
= ir_ack_apic_edge
,
2627 .eoi
= ir_ack_apic_level
,
2629 .set_affinity
= set_ir_ioapic_affinity_irq
,
2632 .retrigger
= ioapic_retrigger_irq
,
2635 static inline void init_IO_APIC_traps(void)
2638 struct irq_desc
*desc
;
2639 struct irq_cfg
*cfg
;
2642 * NOTE! The local APIC isn't very good at handling
2643 * multiple interrupts at the same interrupt level.
2644 * As the interrupt level is determined by taking the
2645 * vector number and shifting that right by 4, we
2646 * want to spread these out a bit so that they don't
2647 * all fall in the same interrupt level.
2649 * Also, we've got to be careful not to trash gate
2650 * 0x80, because int 0x80 is hm, kind of importantish. ;)
2652 for_each_irq_desc(irq
, desc
) {
2653 cfg
= desc
->chip_data
;
2654 if (IO_APIC_IRQ(irq
) && cfg
&& !cfg
->vector
) {
2656 * Hmm.. We don't have an entry for this,
2657 * so default to an old-fashioned 8259
2658 * interrupt if we can..
2660 if (irq
< NR_IRQS_LEGACY
)
2661 make_8259A_irq(irq
);
2663 /* Strange. Oh, well.. */
2664 desc
->chip
= &no_irq_chip
;
2670 * The local APIC irq-chip implementation:
2673 static void mask_lapic_irq(unsigned int irq
)
2677 v
= apic_read(APIC_LVT0
);
2678 apic_write(APIC_LVT0
, v
| APIC_LVT_MASKED
);
2681 static void unmask_lapic_irq(unsigned int irq
)
2685 v
= apic_read(APIC_LVT0
);
2686 apic_write(APIC_LVT0
, v
& ~APIC_LVT_MASKED
);
2689 static void ack_lapic_irq(unsigned int irq
)
2694 static struct irq_chip lapic_chip __read_mostly
= {
2695 .name
= "local-APIC",
2696 .mask
= mask_lapic_irq
,
2697 .unmask
= unmask_lapic_irq
,
2698 .ack
= ack_lapic_irq
,
2701 static void lapic_register_intr(int irq
, struct irq_desc
*desc
)
2703 desc
->status
&= ~IRQ_LEVEL
;
2704 set_irq_chip_and_handler_name(irq
, &lapic_chip
, handle_edge_irq
,
2708 static void __init
setup_nmi(void)
2711 * Dirty trick to enable the NMI watchdog ...
2712 * We put the 8259A master into AEOI mode and
2713 * unmask on all local APICs LVT0 as NMI.
2715 * The idea to use the 8259A in AEOI mode ('8259A Virtual Wire')
2716 * is from Maciej W. Rozycki - so we do not have to EOI from
2717 * the NMI handler or the timer interrupt.
2719 apic_printk(APIC_VERBOSE
, KERN_INFO
"activating NMI Watchdog ...");
2721 enable_NMI_through_LVT0();
2723 apic_printk(APIC_VERBOSE
, " done.\n");
2727 * This looks a bit hackish but it's about the only one way of sending
2728 * a few INTA cycles to 8259As and any associated glue logic. ICR does
2729 * not support the ExtINT mode, unfortunately. We need to send these
2730 * cycles as some i82489DX-based boards have glue logic that keeps the
2731 * 8259A interrupt line asserted until INTA. --macro
2733 static inline void __init
unlock_ExtINT_logic(void)
2736 struct IO_APIC_route_entry entry0
, entry1
;
2737 unsigned char save_control
, save_freq_select
;
2739 pin
= find_isa_irq_pin(8, mp_INT
);
2744 apic
= find_isa_irq_apic(8, mp_INT
);
2750 entry0
= ioapic_read_entry(apic
, pin
);
2751 clear_IO_APIC_pin(apic
, pin
);
2753 memset(&entry1
, 0, sizeof(entry1
));
2755 entry1
.dest_mode
= 0; /* physical delivery */
2756 entry1
.mask
= 0; /* unmask IRQ now */
2757 entry1
.dest
= hard_smp_processor_id();
2758 entry1
.delivery_mode
= dest_ExtINT
;
2759 entry1
.polarity
= entry0
.polarity
;
2763 ioapic_write_entry(apic
, pin
, entry1
);
2765 save_control
= CMOS_READ(RTC_CONTROL
);
2766 save_freq_select
= CMOS_READ(RTC_FREQ_SELECT
);
2767 CMOS_WRITE((save_freq_select
& ~RTC_RATE_SELECT
) | 0x6,
2769 CMOS_WRITE(save_control
| RTC_PIE
, RTC_CONTROL
);
2774 if ((CMOS_READ(RTC_INTR_FLAGS
) & RTC_PF
) == RTC_PF
)
2778 CMOS_WRITE(save_control
, RTC_CONTROL
);
2779 CMOS_WRITE(save_freq_select
, RTC_FREQ_SELECT
);
2780 clear_IO_APIC_pin(apic
, pin
);
2782 ioapic_write_entry(apic
, pin
, entry0
);
2785 static int disable_timer_pin_1 __initdata
;
2786 /* Actually the next is obsolete, but keep it for paranoid reasons -AK */
2787 static int __init
disable_timer_pin_setup(char *arg
)
2789 disable_timer_pin_1
= 1;
2792 early_param("disable_timer_pin_1", disable_timer_pin_setup
);
2794 int timer_through_8259 __initdata
;
2797 * This code may look a bit paranoid, but it's supposed to cooperate with
2798 * a wide range of boards and BIOS bugs. Fortunately only the timer IRQ
2799 * is so screwy. Thanks to Brian Perkins for testing/hacking this beast
2800 * fanatically on his truly buggy board.
2802 * FIXME: really need to revamp this for all platforms.
2804 static inline void __init
check_timer(void)
2806 struct irq_desc
*desc
= irq_to_desc(0);
2807 struct irq_cfg
*cfg
= desc
->chip_data
;
2808 int node
= cpu_to_node(boot_cpu_id
);
2809 int apic1
, pin1
, apic2
, pin2
;
2810 unsigned long flags
;
2813 local_irq_save(flags
);
2816 * get/set the timer IRQ vector:
2818 disable_8259A_irq(0);
2819 assign_irq_vector(0, cfg
, apic
->target_cpus());
2822 * As IRQ0 is to be enabled in the 8259A, the virtual
2823 * wire has to be disabled in the local APIC. Also
2824 * timer interrupts need to be acknowledged manually in
2825 * the 8259A for the i82489DX when using the NMI
2826 * watchdog as that APIC treats NMIs as level-triggered.
2827 * The AEOI mode will finish them in the 8259A
2830 apic_write(APIC_LVT0
, APIC_LVT_MASKED
| APIC_DM_EXTINT
);
2832 #ifdef CONFIG_X86_32
2836 ver
= apic_read(APIC_LVR
);
2837 ver
= GET_APIC_VERSION(ver
);
2838 timer_ack
= (nmi_watchdog
== NMI_IO_APIC
&& !APIC_INTEGRATED(ver
));
2842 pin1
= find_isa_irq_pin(0, mp_INT
);
2843 apic1
= find_isa_irq_apic(0, mp_INT
);
2844 pin2
= ioapic_i8259
.pin
;
2845 apic2
= ioapic_i8259
.apic
;
2847 apic_printk(APIC_QUIET
, KERN_INFO
"..TIMER: vector=0x%02X "
2848 "apic1=%d pin1=%d apic2=%d pin2=%d\n",
2849 cfg
->vector
, apic1
, pin1
, apic2
, pin2
);
2852 * Some BIOS writers are clueless and report the ExtINTA
2853 * I/O APIC input from the cascaded 8259A as the timer
2854 * interrupt input. So just in case, if only one pin
2855 * was found above, try it both directly and through the
2859 if (intr_remapping_enabled
)
2860 panic("BIOS bug: timer not connected to IO-APIC");
2864 } else if (pin2
== -1) {
2871 * Ok, does IRQ0 through the IOAPIC work?
2874 add_pin_to_irq_node(cfg
, node
, apic1
, pin1
);
2875 setup_timer_IRQ0_pin(apic1
, pin1
, cfg
->vector
);
2877 /* for edge trigger, setup_IO_APIC_irq already
2878 * leave it unmasked.
2879 * so only need to unmask if it is level-trigger
2880 * do we really have level trigger timer?
2883 idx
= find_irq_entry(apic1
, pin1
, mp_INT
);
2884 if (idx
!= -1 && irq_trigger(idx
))
2885 unmask_IO_APIC_irq_desc(desc
);
2887 if (timer_irq_works()) {
2888 if (nmi_watchdog
== NMI_IO_APIC
) {
2890 enable_8259A_irq(0);
2892 if (disable_timer_pin_1
> 0)
2893 clear_IO_APIC_pin(0, pin1
);
2896 if (intr_remapping_enabled
)
2897 panic("timer doesn't work through Interrupt-remapped IO-APIC");
2898 local_irq_disable();
2899 clear_IO_APIC_pin(apic1
, pin1
);
2901 apic_printk(APIC_QUIET
, KERN_ERR
"..MP-BIOS bug: "
2902 "8254 timer not connected to IO-APIC\n");
2904 apic_printk(APIC_QUIET
, KERN_INFO
"...trying to set up timer "
2905 "(IRQ0) through the 8259A ...\n");
2906 apic_printk(APIC_QUIET
, KERN_INFO
2907 "..... (found apic %d pin %d) ...\n", apic2
, pin2
);
2909 * legacy devices should be connected to IO APIC #0
2911 replace_pin_at_irq_node(cfg
, node
, apic1
, pin1
, apic2
, pin2
);
2912 setup_timer_IRQ0_pin(apic2
, pin2
, cfg
->vector
);
2913 enable_8259A_irq(0);
2914 if (timer_irq_works()) {
2915 apic_printk(APIC_QUIET
, KERN_INFO
"....... works.\n");
2916 timer_through_8259
= 1;
2917 if (nmi_watchdog
== NMI_IO_APIC
) {
2918 disable_8259A_irq(0);
2920 enable_8259A_irq(0);
2925 * Cleanup, just in case ...
2927 local_irq_disable();
2928 disable_8259A_irq(0);
2929 clear_IO_APIC_pin(apic2
, pin2
);
2930 apic_printk(APIC_QUIET
, KERN_INFO
"....... failed.\n");
2933 if (nmi_watchdog
== NMI_IO_APIC
) {
2934 apic_printk(APIC_QUIET
, KERN_WARNING
"timer doesn't work "
2935 "through the IO-APIC - disabling NMI Watchdog!\n");
2936 nmi_watchdog
= NMI_NONE
;
2938 #ifdef CONFIG_X86_32
2942 apic_printk(APIC_QUIET
, KERN_INFO
2943 "...trying to set up timer as Virtual Wire IRQ...\n");
2945 lapic_register_intr(0, desc
);
2946 apic_write(APIC_LVT0
, APIC_DM_FIXED
| cfg
->vector
); /* Fixed mode */
2947 enable_8259A_irq(0);
2949 if (timer_irq_works()) {
2950 apic_printk(APIC_QUIET
, KERN_INFO
"..... works.\n");
2953 local_irq_disable();
2954 disable_8259A_irq(0);
2955 apic_write(APIC_LVT0
, APIC_LVT_MASKED
| APIC_DM_FIXED
| cfg
->vector
);
2956 apic_printk(APIC_QUIET
, KERN_INFO
"..... failed.\n");
2958 apic_printk(APIC_QUIET
, KERN_INFO
2959 "...trying to set up timer as ExtINT IRQ...\n");
2963 apic_write(APIC_LVT0
, APIC_DM_EXTINT
);
2965 unlock_ExtINT_logic();
2967 if (timer_irq_works()) {
2968 apic_printk(APIC_QUIET
, KERN_INFO
"..... works.\n");
2971 local_irq_disable();
2972 apic_printk(APIC_QUIET
, KERN_INFO
"..... failed :(.\n");
2973 panic("IO-APIC + timer doesn't work! Boot with apic=debug and send a "
2974 "report. Then try booting with the 'noapic' option.\n");
2976 local_irq_restore(flags
);
2980 * Traditionally ISA IRQ2 is the cascade IRQ, and is not available
2981 * to devices. However there may be an I/O APIC pin available for
2982 * this interrupt regardless. The pin may be left unconnected, but
2983 * typically it will be reused as an ExtINT cascade interrupt for
2984 * the master 8259A. In the MPS case such a pin will normally be
2985 * reported as an ExtINT interrupt in the MP table. With ACPI
2986 * there is no provision for ExtINT interrupts, and in the absence
2987 * of an override it would be treated as an ordinary ISA I/O APIC
2988 * interrupt, that is edge-triggered and unmasked by default. We
2989 * used to do this, but it caused problems on some systems because
2990 * of the NMI watchdog and sometimes IRQ0 of the 8254 timer using
2991 * the same ExtINT cascade interrupt to drive the local APIC of the
2992 * bootstrap processor. Therefore we refrain from routing IRQ2 to
2993 * the I/O APIC in all cases now. No actual device should request
2994 * it anyway. --macro
2996 #define PIC_IRQS (1 << PIC_CASCADE_IR)
2998 void __init
setup_IO_APIC(void)
3002 * calling enable_IO_APIC() is moved to setup_local_APIC for BP
3005 io_apic_irqs
= ~PIC_IRQS
;
3007 apic_printk(APIC_VERBOSE
, "ENABLING IO-APIC IRQs\n");
3009 * Set up IO-APIC IRQ routing.
3011 #ifdef CONFIG_X86_32
3013 setup_ioapic_ids_from_mpc();
3016 setup_IO_APIC_irqs();
3017 init_IO_APIC_traps();
3022 * Called after all the initialization is done. If we didnt find any
3023 * APIC bugs then we can allow the modify fast path
3026 static int __init
io_apic_bug_finalize(void)
3028 if (sis_apic_bug
== -1)
3033 late_initcall(io_apic_bug_finalize
);
3035 struct sysfs_ioapic_data
{
3036 struct sys_device dev
;
3037 struct IO_APIC_route_entry entry
[0];
3039 static struct sysfs_ioapic_data
* mp_ioapic_data
[MAX_IO_APICS
];
3041 static int ioapic_suspend(struct sys_device
*dev
, pm_message_t state
)
3043 struct IO_APIC_route_entry
*entry
;
3044 struct sysfs_ioapic_data
*data
;
3047 data
= container_of(dev
, struct sysfs_ioapic_data
, dev
);
3048 entry
= data
->entry
;
3049 for (i
= 0; i
< nr_ioapic_registers
[dev
->id
]; i
++, entry
++ )
3050 *entry
= ioapic_read_entry(dev
->id
, i
);
3055 static int ioapic_resume(struct sys_device
*dev
)
3057 struct IO_APIC_route_entry
*entry
;
3058 struct sysfs_ioapic_data
*data
;
3059 unsigned long flags
;
3060 union IO_APIC_reg_00 reg_00
;
3063 data
= container_of(dev
, struct sysfs_ioapic_data
, dev
);
3064 entry
= data
->entry
;
3066 spin_lock_irqsave(&ioapic_lock
, flags
);
3067 reg_00
.raw
= io_apic_read(dev
->id
, 0);
3068 if (reg_00
.bits
.ID
!= mp_ioapics
[dev
->id
].apicid
) {
3069 reg_00
.bits
.ID
= mp_ioapics
[dev
->id
].apicid
;
3070 io_apic_write(dev
->id
, 0, reg_00
.raw
);
3072 spin_unlock_irqrestore(&ioapic_lock
, flags
);
3073 for (i
= 0; i
< nr_ioapic_registers
[dev
->id
]; i
++)
3074 ioapic_write_entry(dev
->id
, i
, entry
[i
]);
3079 static struct sysdev_class ioapic_sysdev_class
= {
3081 .suspend
= ioapic_suspend
,
3082 .resume
= ioapic_resume
,
3085 static int __init
ioapic_init_sysfs(void)
3087 struct sys_device
* dev
;
3090 error
= sysdev_class_register(&ioapic_sysdev_class
);
3094 for (i
= 0; i
< nr_ioapics
; i
++ ) {
3095 size
= sizeof(struct sys_device
) + nr_ioapic_registers
[i
]
3096 * sizeof(struct IO_APIC_route_entry
);
3097 mp_ioapic_data
[i
] = kzalloc(size
, GFP_KERNEL
);
3098 if (!mp_ioapic_data
[i
]) {
3099 printk(KERN_ERR
"Can't suspend/resume IOAPIC %d\n", i
);
3102 dev
= &mp_ioapic_data
[i
]->dev
;
3104 dev
->cls
= &ioapic_sysdev_class
;
3105 error
= sysdev_register(dev
);
3107 kfree(mp_ioapic_data
[i
]);
3108 mp_ioapic_data
[i
] = NULL
;
3109 printk(KERN_ERR
"Can't suspend/resume IOAPIC %d\n", i
);
3117 device_initcall(ioapic_init_sysfs
);
3119 static int nr_irqs_gsi
= NR_IRQS_LEGACY
;
3121 * Dynamic irq allocate and deallocation
3123 unsigned int create_irq_nr(unsigned int irq_want
, int node
)
3125 /* Allocate an unused irq */
3128 unsigned long flags
;
3129 struct irq_cfg
*cfg_new
= NULL
;
3130 struct irq_desc
*desc_new
= NULL
;
3133 if (irq_want
< nr_irqs_gsi
)
3134 irq_want
= nr_irqs_gsi
;
3136 spin_lock_irqsave(&vector_lock
, flags
);
3137 for (new = irq_want
; new < nr_irqs
; new++) {
3138 desc_new
= irq_to_desc_alloc_node(new, node
);
3140 printk(KERN_INFO
"can not get irq_desc for %d\n", new);
3143 cfg_new
= desc_new
->chip_data
;
3145 if (cfg_new
->vector
!= 0)
3148 desc_new
= move_irq_desc(desc_new
, node
);
3150 if (__assign_irq_vector(new, cfg_new
, apic
->target_cpus()) == 0)
3154 spin_unlock_irqrestore(&vector_lock
, flags
);
3157 dynamic_irq_init(irq
);
3158 /* restore it, in case dynamic_irq_init clear it */
3160 desc_new
->chip_data
= cfg_new
;
3165 int create_irq(void)
3167 int node
= cpu_to_node(boot_cpu_id
);
3168 unsigned int irq_want
;
3171 irq_want
= nr_irqs_gsi
;
3172 irq
= create_irq_nr(irq_want
, node
);
3180 void destroy_irq(unsigned int irq
)
3182 unsigned long flags
;
3183 struct irq_cfg
*cfg
;
3184 struct irq_desc
*desc
;
3186 /* store it, in case dynamic_irq_cleanup clear it */
3187 desc
= irq_to_desc(irq
);
3188 cfg
= desc
->chip_data
;
3189 dynamic_irq_cleanup(irq
);
3190 /* connect back irq_cfg */
3191 desc
->chip_data
= cfg
;
3194 spin_lock_irqsave(&vector_lock
, flags
);
3195 __clear_irq_vector(irq
, cfg
);
3196 spin_unlock_irqrestore(&vector_lock
, flags
);
3200 * MSI message composition
3202 #ifdef CONFIG_PCI_MSI
3203 static int msi_compose_msg(struct pci_dev
*pdev
, unsigned int irq
, struct msi_msg
*msg
)
3205 struct irq_cfg
*cfg
;
3213 err
= assign_irq_vector(irq
, cfg
, apic
->target_cpus());
3217 dest
= apic
->cpu_mask_to_apicid_and(cfg
->domain
, apic
->target_cpus());
3219 if (irq_remapped(irq
)) {
3224 ir_index
= map_irq_to_irte_handle(irq
, &sub_handle
);
3225 BUG_ON(ir_index
== -1);
3227 memset (&irte
, 0, sizeof(irte
));
3230 irte
.dst_mode
= apic
->irq_dest_mode
;
3231 irte
.trigger_mode
= 0; /* edge */
3232 irte
.dlvry_mode
= apic
->irq_delivery_mode
;
3233 irte
.vector
= cfg
->vector
;
3234 irte
.dest_id
= IRTE_DEST(dest
);
3236 /* Set source-id of interrupt request */
3237 set_msi_sid(&irte
, pdev
);
3239 modify_irte(irq
, &irte
);
3241 msg
->address_hi
= MSI_ADDR_BASE_HI
;
3242 msg
->data
= sub_handle
;
3243 msg
->address_lo
= MSI_ADDR_BASE_LO
| MSI_ADDR_IR_EXT_INT
|
3245 MSI_ADDR_IR_INDEX1(ir_index
) |
3246 MSI_ADDR_IR_INDEX2(ir_index
);
3248 if (x2apic_enabled())
3249 msg
->address_hi
= MSI_ADDR_BASE_HI
|
3250 MSI_ADDR_EXT_DEST_ID(dest
);
3252 msg
->address_hi
= MSI_ADDR_BASE_HI
;
3256 ((apic
->irq_dest_mode
== 0) ?
3257 MSI_ADDR_DEST_MODE_PHYSICAL
:
3258 MSI_ADDR_DEST_MODE_LOGICAL
) |
3259 ((apic
->irq_delivery_mode
!= dest_LowestPrio
) ?
3260 MSI_ADDR_REDIRECTION_CPU
:
3261 MSI_ADDR_REDIRECTION_LOWPRI
) |
3262 MSI_ADDR_DEST_ID(dest
);
3265 MSI_DATA_TRIGGER_EDGE
|
3266 MSI_DATA_LEVEL_ASSERT
|
3267 ((apic
->irq_delivery_mode
!= dest_LowestPrio
) ?
3268 MSI_DATA_DELIVERY_FIXED
:
3269 MSI_DATA_DELIVERY_LOWPRI
) |
3270 MSI_DATA_VECTOR(cfg
->vector
);
3276 static int set_msi_irq_affinity(unsigned int irq
, const struct cpumask
*mask
)
3278 struct irq_desc
*desc
= irq_to_desc(irq
);
3279 struct irq_cfg
*cfg
;
3283 dest
= set_desc_affinity(desc
, mask
);
3284 if (dest
== BAD_APICID
)
3287 cfg
= desc
->chip_data
;
3289 read_msi_msg_desc(desc
, &msg
);
3291 msg
.data
&= ~MSI_DATA_VECTOR_MASK
;
3292 msg
.data
|= MSI_DATA_VECTOR(cfg
->vector
);
3293 msg
.address_lo
&= ~MSI_ADDR_DEST_ID_MASK
;
3294 msg
.address_lo
|= MSI_ADDR_DEST_ID(dest
);
3296 write_msi_msg_desc(desc
, &msg
);
3300 #ifdef CONFIG_INTR_REMAP
3302 * Migrate the MSI irq to another cpumask. This migration is
3303 * done in the process context using interrupt-remapping hardware.
3306 ir_set_msi_irq_affinity(unsigned int irq
, const struct cpumask
*mask
)
3308 struct irq_desc
*desc
= irq_to_desc(irq
);
3309 struct irq_cfg
*cfg
= desc
->chip_data
;
3313 if (get_irte(irq
, &irte
))
3316 dest
= set_desc_affinity(desc
, mask
);
3317 if (dest
== BAD_APICID
)
3320 irte
.vector
= cfg
->vector
;
3321 irte
.dest_id
= IRTE_DEST(dest
);
3324 * atomically update the IRTE with the new destination and vector.
3326 modify_irte(irq
, &irte
);
3329 * After this point, all the interrupts will start arriving
3330 * at the new destination. So, time to cleanup the previous
3331 * vector allocation.
3333 if (cfg
->move_in_progress
)
3334 send_cleanup_vector(cfg
);
3340 #endif /* CONFIG_SMP */
3343 * IRQ Chip for MSI PCI/PCI-X/PCI-Express Devices,
3344 * which implement the MSI or MSI-X Capability Structure.
3346 static struct irq_chip msi_chip
= {
3348 .unmask
= unmask_msi_irq
,
3349 .mask
= mask_msi_irq
,
3350 .ack
= ack_apic_edge
,
3352 .set_affinity
= set_msi_irq_affinity
,
3354 .retrigger
= ioapic_retrigger_irq
,
3357 static struct irq_chip msi_ir_chip
= {
3358 .name
= "IR-PCI-MSI",
3359 .unmask
= unmask_msi_irq
,
3360 .mask
= mask_msi_irq
,
3361 #ifdef CONFIG_INTR_REMAP
3362 .ack
= ir_ack_apic_edge
,
3364 .set_affinity
= ir_set_msi_irq_affinity
,
3367 .retrigger
= ioapic_retrigger_irq
,
3371 * Map the PCI dev to the corresponding remapping hardware unit
3372 * and allocate 'nvec' consecutive interrupt-remapping table entries
3375 static int msi_alloc_irte(struct pci_dev
*dev
, int irq
, int nvec
)
3377 struct intel_iommu
*iommu
;
3380 iommu
= map_dev_to_ir(dev
);
3383 "Unable to map PCI %s to iommu\n", pci_name(dev
));
3387 index
= alloc_irte(iommu
, irq
, nvec
);
3390 "Unable to allocate %d IRTE for PCI %s\n", nvec
,
3397 static int setup_msi_irq(struct pci_dev
*dev
, struct msi_desc
*msidesc
, int irq
)
3402 ret
= msi_compose_msg(dev
, irq
, &msg
);
3406 set_irq_msi(irq
, msidesc
);
3407 write_msi_msg(irq
, &msg
);
3409 if (irq_remapped(irq
)) {
3410 struct irq_desc
*desc
= irq_to_desc(irq
);
3412 * irq migration in process context
3414 desc
->status
|= IRQ_MOVE_PCNTXT
;
3415 set_irq_chip_and_handler_name(irq
, &msi_ir_chip
, handle_edge_irq
, "edge");
3417 set_irq_chip_and_handler_name(irq
, &msi_chip
, handle_edge_irq
, "edge");
3419 dev_printk(KERN_DEBUG
, &dev
->dev
, "irq %d for MSI/MSI-X\n", irq
);
3424 int arch_setup_msi_irqs(struct pci_dev
*dev
, int nvec
, int type
)
3427 int ret
, sub_handle
;
3428 struct msi_desc
*msidesc
;
3429 unsigned int irq_want
;
3430 struct intel_iommu
*iommu
= NULL
;
3434 /* x86 doesn't support multiple MSI yet */
3435 if (type
== PCI_CAP_ID_MSI
&& nvec
> 1)
3438 node
= dev_to_node(&dev
->dev
);
3439 irq_want
= nr_irqs_gsi
;
3441 list_for_each_entry(msidesc
, &dev
->msi_list
, list
) {
3442 irq
= create_irq_nr(irq_want
, node
);
3446 if (!intr_remapping_enabled
)
3451 * allocate the consecutive block of IRTE's
3454 index
= msi_alloc_irte(dev
, irq
, nvec
);
3460 iommu
= map_dev_to_ir(dev
);
3466 * setup the mapping between the irq and the IRTE
3467 * base index, the sub_handle pointing to the
3468 * appropriate interrupt remap table entry.
3470 set_irte_irq(irq
, iommu
, index
, sub_handle
);
3473 ret
= setup_msi_irq(dev
, msidesc
, irq
);
3485 void arch_teardown_msi_irq(unsigned int irq
)
3490 #if defined (CONFIG_DMAR) || defined (CONFIG_INTR_REMAP)
3492 static int dmar_msi_set_affinity(unsigned int irq
, const struct cpumask
*mask
)
3494 struct irq_desc
*desc
= irq_to_desc(irq
);
3495 struct irq_cfg
*cfg
;
3499 dest
= set_desc_affinity(desc
, mask
);
3500 if (dest
== BAD_APICID
)
3503 cfg
= desc
->chip_data
;
3505 dmar_msi_read(irq
, &msg
);
3507 msg
.data
&= ~MSI_DATA_VECTOR_MASK
;
3508 msg
.data
|= MSI_DATA_VECTOR(cfg
->vector
);
3509 msg
.address_lo
&= ~MSI_ADDR_DEST_ID_MASK
;
3510 msg
.address_lo
|= MSI_ADDR_DEST_ID(dest
);
3512 dmar_msi_write(irq
, &msg
);
3517 #endif /* CONFIG_SMP */
3519 static struct irq_chip dmar_msi_type
= {
3521 .unmask
= dmar_msi_unmask
,
3522 .mask
= dmar_msi_mask
,
3523 .ack
= ack_apic_edge
,
3525 .set_affinity
= dmar_msi_set_affinity
,
3527 .retrigger
= ioapic_retrigger_irq
,
3530 int arch_setup_dmar_msi(unsigned int irq
)
3535 ret
= msi_compose_msg(NULL
, irq
, &msg
);
3538 dmar_msi_write(irq
, &msg
);
3539 set_irq_chip_and_handler_name(irq
, &dmar_msi_type
, handle_edge_irq
,
3545 #ifdef CONFIG_HPET_TIMER
3548 static int hpet_msi_set_affinity(unsigned int irq
, const struct cpumask
*mask
)
3550 struct irq_desc
*desc
= irq_to_desc(irq
);
3551 struct irq_cfg
*cfg
;
3555 dest
= set_desc_affinity(desc
, mask
);
3556 if (dest
== BAD_APICID
)
3559 cfg
= desc
->chip_data
;
3561 hpet_msi_read(irq
, &msg
);
3563 msg
.data
&= ~MSI_DATA_VECTOR_MASK
;
3564 msg
.data
|= MSI_DATA_VECTOR(cfg
->vector
);
3565 msg
.address_lo
&= ~MSI_ADDR_DEST_ID_MASK
;
3566 msg
.address_lo
|= MSI_ADDR_DEST_ID(dest
);
3568 hpet_msi_write(irq
, &msg
);
3573 #endif /* CONFIG_SMP */
3575 static struct irq_chip hpet_msi_type
= {
3577 .unmask
= hpet_msi_unmask
,
3578 .mask
= hpet_msi_mask
,
3579 .ack
= ack_apic_edge
,
3581 .set_affinity
= hpet_msi_set_affinity
,
3583 .retrigger
= ioapic_retrigger_irq
,
3586 int arch_setup_hpet_msi(unsigned int irq
)
3590 struct irq_desc
*desc
= irq_to_desc(irq
);
3592 ret
= msi_compose_msg(NULL
, irq
, &msg
);
3596 hpet_msi_write(irq
, &msg
);
3597 desc
->status
|= IRQ_MOVE_PCNTXT
;
3598 set_irq_chip_and_handler_name(irq
, &hpet_msi_type
, handle_edge_irq
,
3605 #endif /* CONFIG_PCI_MSI */
3607 * Hypertransport interrupt support
3609 #ifdef CONFIG_HT_IRQ
3613 static void target_ht_irq(unsigned int irq
, unsigned int dest
, u8 vector
)
3615 struct ht_irq_msg msg
;
3616 fetch_ht_irq_msg(irq
, &msg
);
3618 msg
.address_lo
&= ~(HT_IRQ_LOW_VECTOR_MASK
| HT_IRQ_LOW_DEST_ID_MASK
);
3619 msg
.address_hi
&= ~(HT_IRQ_HIGH_DEST_ID_MASK
);
3621 msg
.address_lo
|= HT_IRQ_LOW_VECTOR(vector
) | HT_IRQ_LOW_DEST_ID(dest
);
3622 msg
.address_hi
|= HT_IRQ_HIGH_DEST_ID(dest
);
3624 write_ht_irq_msg(irq
, &msg
);
3627 static int set_ht_irq_affinity(unsigned int irq
, const struct cpumask
*mask
)
3629 struct irq_desc
*desc
= irq_to_desc(irq
);
3630 struct irq_cfg
*cfg
;
3633 dest
= set_desc_affinity(desc
, mask
);
3634 if (dest
== BAD_APICID
)
3637 cfg
= desc
->chip_data
;
3639 target_ht_irq(irq
, dest
, cfg
->vector
);
3646 static struct irq_chip ht_irq_chip
= {
3648 .mask
= mask_ht_irq
,
3649 .unmask
= unmask_ht_irq
,
3650 .ack
= ack_apic_edge
,
3652 .set_affinity
= set_ht_irq_affinity
,
3654 .retrigger
= ioapic_retrigger_irq
,
3657 int arch_setup_ht_irq(unsigned int irq
, struct pci_dev
*dev
)
3659 struct irq_cfg
*cfg
;
3666 err
= assign_irq_vector(irq
, cfg
, apic
->target_cpus());
3668 struct ht_irq_msg msg
;
3671 dest
= apic
->cpu_mask_to_apicid_and(cfg
->domain
,
3672 apic
->target_cpus());
3674 msg
.address_hi
= HT_IRQ_HIGH_DEST_ID(dest
);
3678 HT_IRQ_LOW_DEST_ID(dest
) |
3679 HT_IRQ_LOW_VECTOR(cfg
->vector
) |
3680 ((apic
->irq_dest_mode
== 0) ?
3681 HT_IRQ_LOW_DM_PHYSICAL
:
3682 HT_IRQ_LOW_DM_LOGICAL
) |
3683 HT_IRQ_LOW_RQEOI_EDGE
|
3684 ((apic
->irq_delivery_mode
!= dest_LowestPrio
) ?
3685 HT_IRQ_LOW_MT_FIXED
:
3686 HT_IRQ_LOW_MT_ARBITRATED
) |
3687 HT_IRQ_LOW_IRQ_MASKED
;
3689 write_ht_irq_msg(irq
, &msg
);
3691 set_irq_chip_and_handler_name(irq
, &ht_irq_chip
,
3692 handle_edge_irq
, "edge");
3694 dev_printk(KERN_DEBUG
, &dev
->dev
, "irq %d for HT\n", irq
);
3698 #endif /* CONFIG_HT_IRQ */
3700 #ifdef CONFIG_X86_UV
3702 * Re-target the irq to the specified CPU and enable the specified MMR located
3703 * on the specified blade to allow the sending of MSIs to the specified CPU.
3705 int arch_enable_uv_irq(char *irq_name
, unsigned int irq
, int cpu
, int mmr_blade
,
3706 unsigned long mmr_offset
)
3708 const struct cpumask
*eligible_cpu
= cpumask_of(cpu
);
3709 struct irq_cfg
*cfg
;
3711 unsigned long mmr_value
;
3712 struct uv_IO_APIC_route_entry
*entry
;
3713 unsigned long flags
;
3716 BUILD_BUG_ON(sizeof(struct uv_IO_APIC_route_entry
) != sizeof(unsigned long));
3720 err
= assign_irq_vector(irq
, cfg
, eligible_cpu
);
3724 spin_lock_irqsave(&vector_lock
, flags
);
3725 set_irq_chip_and_handler_name(irq
, &uv_irq_chip
, handle_percpu_irq
,
3727 spin_unlock_irqrestore(&vector_lock
, flags
);
3730 entry
= (struct uv_IO_APIC_route_entry
*)&mmr_value
;
3731 entry
->vector
= cfg
->vector
;
3732 entry
->delivery_mode
= apic
->irq_delivery_mode
;
3733 entry
->dest_mode
= apic
->irq_dest_mode
;
3734 entry
->polarity
= 0;
3737 entry
->dest
= apic
->cpu_mask_to_apicid(eligible_cpu
);
3739 mmr_pnode
= uv_blade_to_pnode(mmr_blade
);
3740 uv_write_global_mmr64(mmr_pnode
, mmr_offset
, mmr_value
);
3742 if (cfg
->move_in_progress
)
3743 send_cleanup_vector(cfg
);
3749 * Disable the specified MMR located on the specified blade so that MSIs are
3750 * longer allowed to be sent.
3752 void arch_disable_uv_irq(int mmr_blade
, unsigned long mmr_offset
)
3754 unsigned long mmr_value
;
3755 struct uv_IO_APIC_route_entry
*entry
;
3758 BUILD_BUG_ON(sizeof(struct uv_IO_APIC_route_entry
) != sizeof(unsigned long));
3761 entry
= (struct uv_IO_APIC_route_entry
*)&mmr_value
;
3764 mmr_pnode
= uv_blade_to_pnode(mmr_blade
);
3765 uv_write_global_mmr64(mmr_pnode
, mmr_offset
, mmr_value
);
3767 #endif /* CONFIG_X86_64 */
3769 int __init
io_apic_get_redir_entries (int ioapic
)
3771 union IO_APIC_reg_01 reg_01
;
3772 unsigned long flags
;
3774 spin_lock_irqsave(&ioapic_lock
, flags
);
3775 reg_01
.raw
= io_apic_read(ioapic
, 1);
3776 spin_unlock_irqrestore(&ioapic_lock
, flags
);
3778 return reg_01
.bits
.entries
;
3781 void __init
probe_nr_irqs_gsi(void)
3785 nr
= acpi_probe_gsi();
3786 if (nr
> nr_irqs_gsi
) {
3789 /* for acpi=off or acpi is not compiled in */
3793 for (idx
= 0; idx
< nr_ioapics
; idx
++)
3794 nr
+= io_apic_get_redir_entries(idx
) + 1;
3796 if (nr
> nr_irqs_gsi
)
3800 printk(KERN_DEBUG
"nr_irqs_gsi: %d\n", nr_irqs_gsi
);
3803 #ifdef CONFIG_SPARSE_IRQ
3804 int __init
arch_probe_nr_irqs(void)
3808 if (nr_irqs
> (NR_VECTORS
* nr_cpu_ids
))
3809 nr_irqs
= NR_VECTORS
* nr_cpu_ids
;
3811 nr
= nr_irqs_gsi
+ 8 * nr_cpu_ids
;
3812 #if defined(CONFIG_PCI_MSI) || defined(CONFIG_HT_IRQ)
3814 * for MSI and HT dyn irq
3816 nr
+= nr_irqs_gsi
* 16;
3825 static int __io_apic_set_pci_routing(struct device
*dev
, int irq
,
3826 struct io_apic_irq_attr
*irq_attr
)
3828 struct irq_desc
*desc
;
3829 struct irq_cfg
*cfg
;
3832 int trigger
, polarity
;
3834 ioapic
= irq_attr
->ioapic
;
3835 if (!IO_APIC_IRQ(irq
)) {
3836 apic_printk(APIC_QUIET
,KERN_ERR
"IOAPIC[%d]: Invalid reference to IRQ 0\n",
3842 node
= dev_to_node(dev
);
3844 node
= cpu_to_node(boot_cpu_id
);
3846 desc
= irq_to_desc_alloc_node(irq
, node
);
3848 printk(KERN_INFO
"can not get irq_desc %d\n", irq
);
3852 pin
= irq_attr
->ioapic_pin
;
3853 trigger
= irq_attr
->trigger
;
3854 polarity
= irq_attr
->polarity
;
3857 * IRQs < 16 are already in the irq_2_pin[] map
3859 if (irq
>= NR_IRQS_LEGACY
) {
3860 cfg
= desc
->chip_data
;
3861 if (add_pin_to_irq_node_nopanic(cfg
, node
, ioapic
, pin
)) {
3862 printk(KERN_INFO
"can not add pin %d for irq %d\n",
3868 setup_IO_APIC_irq(ioapic
, pin
, irq
, desc
, trigger
, polarity
);
3873 int io_apic_set_pci_routing(struct device
*dev
, int irq
,
3874 struct io_apic_irq_attr
*irq_attr
)
3878 * Avoid pin reprogramming. PRTs typically include entries
3879 * with redundant pin->gsi mappings (but unique PCI devices);
3880 * we only program the IOAPIC on the first.
3882 ioapic
= irq_attr
->ioapic
;
3883 pin
= irq_attr
->ioapic_pin
;
3884 if (test_bit(pin
, mp_ioapic_routing
[ioapic
].pin_programmed
)) {
3885 pr_debug("Pin %d-%d already programmed\n",
3886 mp_ioapics
[ioapic
].apicid
, pin
);
3889 set_bit(pin
, mp_ioapic_routing
[ioapic
].pin_programmed
);
3891 return __io_apic_set_pci_routing(dev
, irq
, irq_attr
);
3894 u8 __init
io_apic_unique_id(u8 id
)
3896 #ifdef CONFIG_X86_32
3897 if ((boot_cpu_data
.x86_vendor
== X86_VENDOR_INTEL
) &&
3898 !APIC_XAPIC(apic_version
[boot_cpu_physical_apicid
]))
3899 return io_apic_get_unique_id(nr_ioapics
, id
);
3904 DECLARE_BITMAP(used
, 256);
3906 bitmap_zero(used
, 256);
3907 for (i
= 0; i
< nr_ioapics
; i
++) {
3908 struct mpc_ioapic
*ia
= &mp_ioapics
[i
];
3909 __set_bit(ia
->apicid
, used
);
3911 if (!test_bit(id
, used
))
3913 return find_first_zero_bit(used
, 256);
3917 #ifdef CONFIG_X86_32
3918 int __init
io_apic_get_unique_id(int ioapic
, int apic_id
)
3920 union IO_APIC_reg_00 reg_00
;
3921 static physid_mask_t apic_id_map
= PHYSID_MASK_NONE
;
3923 unsigned long flags
;
3927 * The P4 platform supports up to 256 APIC IDs on two separate APIC
3928 * buses (one for LAPICs, one for IOAPICs), where predecessors only
3929 * supports up to 16 on one shared APIC bus.
3931 * TBD: Expand LAPIC/IOAPIC support on P4-class systems to take full
3932 * advantage of new APIC bus architecture.
3935 if (physids_empty(apic_id_map
))
3936 apic_id_map
= apic
->ioapic_phys_id_map(phys_cpu_present_map
);
3938 spin_lock_irqsave(&ioapic_lock
, flags
);
3939 reg_00
.raw
= io_apic_read(ioapic
, 0);
3940 spin_unlock_irqrestore(&ioapic_lock
, flags
);
3942 if (apic_id
>= get_physical_broadcast()) {
3943 printk(KERN_WARNING
"IOAPIC[%d]: Invalid apic_id %d, trying "
3944 "%d\n", ioapic
, apic_id
, reg_00
.bits
.ID
);
3945 apic_id
= reg_00
.bits
.ID
;
3949 * Every APIC in a system must have a unique ID or we get lots of nice
3950 * 'stuck on smp_invalidate_needed IPI wait' messages.
3952 if (apic
->check_apicid_used(apic_id_map
, apic_id
)) {
3954 for (i
= 0; i
< get_physical_broadcast(); i
++) {
3955 if (!apic
->check_apicid_used(apic_id_map
, i
))
3959 if (i
== get_physical_broadcast())
3960 panic("Max apic_id exceeded!\n");
3962 printk(KERN_WARNING
"IOAPIC[%d]: apic_id %d already used, "
3963 "trying %d\n", ioapic
, apic_id
, i
);
3968 tmp
= apic
->apicid_to_cpu_present(apic_id
);
3969 physids_or(apic_id_map
, apic_id_map
, tmp
);
3971 if (reg_00
.bits
.ID
!= apic_id
) {
3972 reg_00
.bits
.ID
= apic_id
;
3974 spin_lock_irqsave(&ioapic_lock
, flags
);
3975 io_apic_write(ioapic
, 0, reg_00
.raw
);
3976 reg_00
.raw
= io_apic_read(ioapic
, 0);
3977 spin_unlock_irqrestore(&ioapic_lock
, flags
);
3980 if (reg_00
.bits
.ID
!= apic_id
) {
3981 printk("IOAPIC[%d]: Unable to change apic_id!\n", ioapic
);
3986 apic_printk(APIC_VERBOSE
, KERN_INFO
3987 "IOAPIC[%d]: Assigned apic_id %d\n", ioapic
, apic_id
);
3993 int __init
io_apic_get_version(int ioapic
)
3995 union IO_APIC_reg_01 reg_01
;
3996 unsigned long flags
;
3998 spin_lock_irqsave(&ioapic_lock
, flags
);
3999 reg_01
.raw
= io_apic_read(ioapic
, 1);
4000 spin_unlock_irqrestore(&ioapic_lock
, flags
);
4002 return reg_01
.bits
.version
;
4005 int acpi_get_override_irq(int bus_irq
, int *trigger
, int *polarity
)
4009 if (skip_ioapic_setup
)
4012 for (i
= 0; i
< mp_irq_entries
; i
++)
4013 if (mp_irqs
[i
].irqtype
== mp_INT
&&
4014 mp_irqs
[i
].srcbusirq
== bus_irq
)
4016 if (i
>= mp_irq_entries
)
4019 *trigger
= irq_trigger(i
);
4020 *polarity
= irq_polarity(i
);
4025 * This function currently is only a helper for the i386 smp boot process where
4026 * we need to reprogram the ioredtbls to cater for the cpus which have come online
4027 * so mask in all cases should simply be apic->target_cpus()
4030 void __init
setup_ioapic_dest(void)
4032 int pin
, ioapic
= 0, irq
, irq_entry
;
4033 struct irq_desc
*desc
;
4034 const struct cpumask
*mask
;
4036 if (skip_ioapic_setup
== 1)
4040 if (!acpi_disabled
&& acpi_ioapic
) {
4041 ioapic
= mp_find_ioapic(0);
4047 for (pin
= 0; pin
< nr_ioapic_registers
[ioapic
]; pin
++) {
4048 irq_entry
= find_irq_entry(ioapic
, pin
, mp_INT
);
4049 if (irq_entry
== -1)
4051 irq
= pin_2_irq(irq_entry
, ioapic
, pin
);
4053 desc
= irq_to_desc(irq
);
4056 * Honour affinities which have been set in early boot
4059 (IRQ_NO_BALANCING
| IRQ_AFFINITY_SET
))
4060 mask
= desc
->affinity
;
4062 mask
= apic
->target_cpus();
4064 if (intr_remapping_enabled
)
4065 set_ir_ioapic_affinity_irq_desc(desc
, mask
);
4067 set_ioapic_affinity_irq_desc(desc
, mask
);
4073 #define IOAPIC_RESOURCE_NAME_SIZE 11
4075 static struct resource
*ioapic_resources
;
4077 static struct resource
* __init
ioapic_setup_resources(int nr_ioapics
)
4080 struct resource
*res
;
4084 if (nr_ioapics
<= 0)
4087 n
= IOAPIC_RESOURCE_NAME_SIZE
+ sizeof(struct resource
);
4090 mem
= alloc_bootmem(n
);
4093 mem
+= sizeof(struct resource
) * nr_ioapics
;
4095 for (i
= 0; i
< nr_ioapics
; i
++) {
4097 res
[i
].flags
= IORESOURCE_MEM
| IORESOURCE_BUSY
;
4098 sprintf(mem
, "IOAPIC %u", i
);
4099 mem
+= IOAPIC_RESOURCE_NAME_SIZE
;
4102 ioapic_resources
= res
;
4107 void __init
ioapic_init_mappings(void)
4109 unsigned long ioapic_phys
, idx
= FIX_IO_APIC_BASE_0
;
4110 struct resource
*ioapic_res
;
4113 ioapic_res
= ioapic_setup_resources(nr_ioapics
);
4114 for (i
= 0; i
< nr_ioapics
; i
++) {
4115 if (smp_found_config
) {
4116 ioapic_phys
= mp_ioapics
[i
].apicaddr
;
4117 #ifdef CONFIG_X86_32
4120 "WARNING: bogus zero IO-APIC "
4121 "address found in MPTABLE, "
4122 "disabling IO/APIC support!\n");
4123 smp_found_config
= 0;
4124 skip_ioapic_setup
= 1;
4125 goto fake_ioapic_page
;
4129 #ifdef CONFIG_X86_32
4132 ioapic_phys
= (unsigned long)
4133 alloc_bootmem_pages(PAGE_SIZE
);
4134 ioapic_phys
= __pa(ioapic_phys
);
4136 set_fixmap_nocache(idx
, ioapic_phys
);
4137 apic_printk(APIC_VERBOSE
,
4138 "mapped IOAPIC to %08lx (%08lx)\n",
4139 __fix_to_virt(idx
), ioapic_phys
);
4142 ioapic_res
->start
= ioapic_phys
;
4143 ioapic_res
->end
= ioapic_phys
+ (4 * 1024) - 1;
4148 void __init
ioapic_insert_resources(void)
4151 struct resource
*r
= ioapic_resources
;
4156 "IO APIC resources couldn't be allocated.\n");
4160 for (i
= 0; i
< nr_ioapics
; i
++) {
4161 insert_resource(&iomem_resource
, r
);
4166 int mp_find_ioapic(int gsi
)
4170 /* Find the IOAPIC that manages this GSI. */
4171 for (i
= 0; i
< nr_ioapics
; i
++) {
4172 if ((gsi
>= mp_gsi_routing
[i
].gsi_base
)
4173 && (gsi
<= mp_gsi_routing
[i
].gsi_end
))
4177 printk(KERN_ERR
"ERROR: Unable to locate IOAPIC for GSI %d\n", gsi
);
4181 int mp_find_ioapic_pin(int ioapic
, int gsi
)
4183 if (WARN_ON(ioapic
== -1))
4185 if (WARN_ON(gsi
> mp_gsi_routing
[ioapic
].gsi_end
))
4188 return gsi
- mp_gsi_routing
[ioapic
].gsi_base
;
4191 static int bad_ioapic(unsigned long address
)
4193 if (nr_ioapics
>= MAX_IO_APICS
) {
4194 printk(KERN_WARNING
"WARING: Max # of I/O APICs (%d) exceeded "
4195 "(found %d), skipping\n", MAX_IO_APICS
, nr_ioapics
);
4199 printk(KERN_WARNING
"WARNING: Bogus (zero) I/O APIC address"
4200 " found in table, skipping!\n");
4206 void __init
mp_register_ioapic(int id
, u32 address
, u32 gsi_base
)
4210 if (bad_ioapic(address
))
4215 mp_ioapics
[idx
].type
= MP_IOAPIC
;
4216 mp_ioapics
[idx
].flags
= MPC_APIC_USABLE
;
4217 mp_ioapics
[idx
].apicaddr
= address
;
4219 set_fixmap_nocache(FIX_IO_APIC_BASE_0
+ idx
, address
);
4220 mp_ioapics
[idx
].apicid
= io_apic_unique_id(id
);
4221 mp_ioapics
[idx
].apicver
= io_apic_get_version(idx
);
4224 * Build basic GSI lookup table to facilitate gsi->io_apic lookups
4225 * and to prevent reprogramming of IOAPIC pins (PCI GSIs).
4227 mp_gsi_routing
[idx
].gsi_base
= gsi_base
;
4228 mp_gsi_routing
[idx
].gsi_end
= gsi_base
+
4229 io_apic_get_redir_entries(idx
);
4231 printk(KERN_INFO
"IOAPIC[%d]: apic_id %d, version %d, address 0x%x, "
4232 "GSI %d-%d\n", idx
, mp_ioapics
[idx
].apicid
,
4233 mp_ioapics
[idx
].apicver
, mp_ioapics
[idx
].apicaddr
,
4234 mp_gsi_routing
[idx
].gsi_base
, mp_gsi_routing
[idx
].gsi_end
);