Revert "swiotlb-xen: pass dev_addr to swiotlb_tbl_unmap_single"
[linux/fpc-iii.git] / net / tipc / core.h
blobf773b148722f7e51195d525a55e2ae18577c3c3e
1 /*
2 * net/tipc/core.h: Include file for TIPC global declarations
4 * Copyright (c) 2005-2006, 2013 Ericsson AB
5 * Copyright (c) 2005-2007, 2010-2013, Wind River Systems
6 * All rights reserved.
8 * Redistribution and use in source and binary forms, with or without
9 * modification, are permitted provided that the following conditions are met:
11 * 1. Redistributions of source code must retain the above copyright
12 * notice, this list of conditions and the following disclaimer.
13 * 2. Redistributions in binary form must reproduce the above copyright
14 * notice, this list of conditions and the following disclaimer in the
15 * documentation and/or other materials provided with the distribution.
16 * 3. Neither the names of the copyright holders nor the names of its
17 * contributors may be used to endorse or promote products derived from
18 * this software without specific prior written permission.
20 * Alternatively, this software may be distributed under the terms of the
21 * GNU General Public License ("GPL") version 2 as published by the Free
22 * Software Foundation.
24 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
25 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
26 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
27 * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
28 * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
29 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
30 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
31 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
32 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
33 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
34 * POSSIBILITY OF SUCH DAMAGE.
37 #ifndef _TIPC_CORE_H
38 #define _TIPC_CORE_H
40 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
42 #include <linux/tipc.h>
43 #include <linux/tipc_config.h>
44 #include <linux/types.h>
45 #include <linux/kernel.h>
46 #include <linux/errno.h>
47 #include <linux/mm.h>
48 #include <linux/timer.h>
49 #include <linux/string.h>
50 #include <linux/uaccess.h>
51 #include <linux/interrupt.h>
52 #include <linux/atomic.h>
53 #include <asm/hardirq.h>
54 #include <linux/netdevice.h>
55 #include <linux/in.h>
56 #include <linux/list.h>
57 #include <linux/slab.h>
58 #include <linux/vmalloc.h>
59 #include <linux/rtnetlink.h>
60 #include <linux/etherdevice.h>
62 #define TIPC_MOD_VER "2.0.0"
64 #define ULTRA_STRING_MAX_LEN 32768
65 #define TIPC_MAX_SUBSCRIPTIONS 65535
66 #define TIPC_MAX_PUBLICATIONS 65535
68 struct tipc_msg; /* msg.h */
70 int tipc_snprintf(char *buf, int len, const char *fmt, ...);
73 * TIPC-specific error codes
75 #define ELINKCONG EAGAIN /* link congestion <=> resource unavailable */
78 * Global configuration variables
80 extern u32 tipc_own_addr __read_mostly;
81 extern int tipc_max_ports __read_mostly;
82 extern int tipc_net_id __read_mostly;
83 extern int sysctl_tipc_rmem[3] __read_mostly;
84 extern int sysctl_tipc_named_timeout __read_mostly;
87 * Other global variables
89 extern int tipc_random __read_mostly;
92 * Routines available to privileged subsystems
94 int tipc_netlink_start(void);
95 void tipc_netlink_stop(void);
96 int tipc_socket_init(void);
97 void tipc_socket_stop(void);
98 int tipc_sock_create_local(int type, struct socket **res);
99 void tipc_sock_release_local(struct socket *sock);
100 int tipc_sock_accept_local(struct socket *sock, struct socket **newsock,
101 int flags);
103 #ifdef CONFIG_SYSCTL
104 int tipc_register_sysctl(void);
105 void tipc_unregister_sysctl(void);
106 #else
107 #define tipc_register_sysctl() 0
108 #define tipc_unregister_sysctl()
109 #endif
112 * TIPC timer code
114 typedef void (*Handler) (unsigned long);
117 * k_init_timer - initialize a timer
118 * @timer: pointer to timer structure
119 * @routine: pointer to routine to invoke when timer expires
120 * @argument: value to pass to routine when timer expires
122 * Timer must be initialized before use (and terminated when no longer needed).
124 static inline void k_init_timer(struct timer_list *timer, Handler routine,
125 unsigned long argument)
127 setup_timer(timer, routine, argument);
131 * k_start_timer - start a timer
132 * @timer: pointer to timer structure
133 * @msec: time to delay (in ms)
135 * Schedules a previously initialized timer for later execution.
136 * If timer is already running, the new timeout overrides the previous request.
138 * To ensure the timer doesn't expire before the specified delay elapses,
139 * the amount of delay is rounded up when converting to the jiffies
140 * then an additional jiffy is added to account for the fact that
141 * the starting time may be in the middle of the current jiffy.
143 static inline void k_start_timer(struct timer_list *timer, unsigned long msec)
145 mod_timer(timer, jiffies + msecs_to_jiffies(msec) + 1);
149 * k_cancel_timer - cancel a timer
150 * @timer: pointer to timer structure
152 * Cancels a previously initialized timer.
153 * Can be called safely even if the timer is already inactive.
155 * WARNING: Must not be called when holding locks required by the timer's
156 * timeout routine, otherwise deadlock can occur on SMP systems!
158 static inline void k_cancel_timer(struct timer_list *timer)
160 del_timer_sync(timer);
164 * k_term_timer - terminate a timer
165 * @timer: pointer to timer structure
167 * Prevents further use of a previously initialized timer.
169 * WARNING: Caller must ensure timer isn't currently running.
171 * (Do not "enhance" this routine to automatically cancel an active timer,
172 * otherwise deadlock can arise when a timeout routine calls k_term_timer.)
174 static inline void k_term_timer(struct timer_list *timer)
179 * TIPC message buffer code
181 * TIPC message buffer headroom reserves space for the worst-case
182 * link-level device header (in case the message is sent off-node).
184 * Note: Headroom should be a multiple of 4 to ensure the TIPC header fields
185 * are word aligned for quicker access
187 #define BUF_HEADROOM LL_MAX_HEADER
189 struct tipc_skb_cb {
190 void *handle;
191 struct sk_buff *tail;
192 bool deferred;
193 bool wakeup_pending;
194 u16 chain_sz;
195 u16 chain_imp;
198 #define TIPC_SKB_CB(__skb) ((struct tipc_skb_cb *)&((__skb)->cb[0]))
200 static inline struct tipc_msg *buf_msg(struct sk_buff *skb)
202 return (struct tipc_msg *)skb->data;
205 struct sk_buff *tipc_buf_acquire(u32 size);
207 #endif